Allwinner A31 has introduced a new memory mapping and a
reset line.
The difference in memory mapping are :
- In the configure register there is a new sample bit
and Allwinner has introduced the active threshold feature.
- In the status register a new STAT bit is present.
Note: CGPO and DRQ_EN bits are removed on A31 but present on A13
and on new SoCs like A64/H6.
This is actually not an issue as these bits are togglable and new
SoCs have a dedicated bindings.
Introduce this bindings to make a difference since this generation.
And declare the reset line required since A31.
Signed-off-by: Clément Péron <[email protected]>
Acked-by: Sean Young <[email protected]>
---
Documentation/devicetree/bindings/media/sunxi-ir.txt | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt b/Documentation/devicetree/bindings/media/sunxi-ir.txt
index 278098987edb..2e59a32a7e33 100644
--- a/Documentation/devicetree/bindings/media/sunxi-ir.txt
+++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt
@@ -1,16 +1,21 @@
Device-Tree bindings for SUNXI IR controller found in sunXi SoC family
Required properties:
-- compatible : "allwinner,sun4i-a10-ir" or "allwinner,sun5i-a13-ir"
+- compatible :
+ "allwinner,sun4i-a10-ir"
+ "allwinner,sun5i-a13-ir"
+ "allwinner,sun6i-a31-ir"
- clocks : list of clock specifiers, corresponding to
entries in clock-names property;
- clock-names : should contain "apb" and "ir" entries;
- interrupts : should contain IR IRQ number;
- reg : should contain IO map address for IR.
+Required properties since A31:
+- resets : phandle + reset specifier pair
+
Optional properties:
- linux,rc-map-name: see rc.txt file in the same directory.
-- resets : phandle + reset specifier pair
- clock-frequency : IR Receiver clock frequency, in Hertz. Defaults to 8 MHz
if missing.
--
2.20.1
On Tue, Jun 04, 2019 at 06:29:47PM +0200, Cl?ment P?ron wrote:
> Allwinner A31 has introduced a new memory mapping and a
> reset line.
>
> The difference in memory mapping are :
>
> - In the configure register there is a new sample bit
> and Allwinner has introduced the active threshold feature.
>
> - In the status register a new STAT bit is present.
>
> Note: CGPO and DRQ_EN bits are removed on A31 but present on A13
> and on new SoCs like A64/H6.
> This is actually not an issue as these bits are togglable and new
> SoCs have a dedicated bindings.
>
> Introduce this bindings to make a difference since this generation.
> And declare the reset line required since A31.
>
> Signed-off-by: Cl?ment P?ron <[email protected]>
> Acked-by: Sean Young <[email protected]>
Acked-by: Maxime Ripard <[email protected]>
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com