2019-06-10 13:50:57

by Maxime Chevallier

Subject: [PATCH net 1/2] net: mvpp2: prs: Fix parser range for VID filtering

VID filtering is implemented in the Header Parser, with one range of 11
vids being assigned for each no-loopback port.

Make sure we use the per-port range when looking for existing entries in
the Parser.

Since we used a global range instead of a per-port one, this causes VIDs
to be removed from the whitelist from all ports of the same PPv2
instance.

Fixes: 56beda3db602 ("net: mvpp2: Add hardware offloading for VLAN filtering")
Suggested-by: Yuri Chipchev <[email protected]>
Signed-off-by: Maxime Chevallier <[email protected]>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
index 392fd895f278..e0da4db3bf56 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
@@ -1905,8 +1905,7 @@ static int mvpp2_prs_ip6_init(struct mvpp2 *priv)
}

/* Find tcam entry with matched pair <vid,port> */
-static int mvpp2_prs_vid_range_find(struct mvpp2 *priv, int pmap, u16 vid,
- u16 mask)
+static int mvpp2_prs_vid_range_find(struct mvpp2_port *port, u16 vid, u16 mask)
{
unsigned char byte[2], enable[2];
struct mvpp2_prs_entry pe;
@@ -1914,13 +1913,13 @@ static int mvpp2_prs_vid_range_find(struct mvpp2 *priv, int pmap, u16 vid,
int tid;

/* Go through the all entries with MVPP2_PRS_LU_VID */
- for (tid = MVPP2_PE_VID_FILT_RANGE_START;
- tid <= MVPP2_PE_VID_FILT_RANGE_END; tid++) {
- if (!priv->prs_shadow[tid].valid ||
- priv->prs_shadow[tid].lu != MVPP2_PRS_LU_VID)
+ for (tid = MVPP2_PRS_VID_PORT_FIRST(port->id);
+ tid <= MVPP2_PRS_VID_PORT_LAST(port->id); tid++) {
+ if (!port->priv->prs_shadow[tid].valid ||
+ port->priv->prs_shadow[tid].lu != MVPP2_PRS_LU_VID)
continue;

- mvpp2_prs_init_from_hw(priv, &pe, tid);
+ mvpp2_prs_init_from_hw(port->priv, &pe, tid);

mvpp2_prs_tcam_data_byte_get(&pe, 2, &byte[0], &enable[0]);
mvpp2_prs_tcam_data_byte_get(&pe, 3, &byte[1], &enable[1]);
@@ -1950,7 +1949,7 @@ int mvpp2_prs_vid_entry_add(struct mvpp2_port *port, u16 vid)
memset(&pe, 0, sizeof(pe));

/* Scan TCAM and see if entry with this <vid,port> already exist */
- tid = mvpp2_prs_vid_range_find(priv, (1 << port->id), vid, mask);
+ tid = mvpp2_prs_vid_range_find(port, vid, mask);

reg_val = mvpp2_read(priv, MVPP2_MH_REG(port->id));
if (reg_val & MVPP2_DSA_EXTENDED)
@@ -2008,7 +2007,7 @@ void mvpp2_prs_vid_entry_remove(struct mvpp2_port *port, u16 vid)
int tid;

/* Scan TCAM and see if entry with this <vid,port> already exist */
- tid = mvpp2_prs_vid_range_find(priv, (1 << port->id), vid, 0xfff);
+ tid = mvpp2_prs_vid_range_find(port, vid, 0xfff);

/* No such entry */
if (tid < 0)
--
2.20.1

2019-06-10 13:51:07

by Maxime Chevallier

Subject: [PATCH net 2/2] net: mvpp2: prs: Use the correct helpers when removing all VID filters

When removing all VID filters, the mvpp2_prs_vid_entry_remove would be
called with the TCAM id incorrectly used as a VID, causing the wrong
TCAM entries to be invalidated.

Fix this by directly invalidating entries in the VID range.

Fixes: 56beda3db602 ("net: mvpp2: Add hardware offloading for VLAN filtering")
Suggested-by: Yuri Chipchev <[email protected]>
Signed-off-by: Maxime Chevallier <[email protected]>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
index e0da4db3bf56..ae2240074d8e 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c
@@ -2025,8 +2025,10 @@ void mvpp2_prs_vid_remove_all(struct mvpp2_port *port)

for (tid = MVPP2_PRS_VID_PORT_FIRST(port->id);
tid <= MVPP2_PRS_VID_PORT_LAST(port->id); tid++) {
- if (priv->prs_shadow[tid].valid)
- mvpp2_prs_vid_entry_remove(port, tid);
+ if (priv->prs_shadow[tid].valid) {
+ mvpp2_prs_hw_inv(priv, tid);
+ priv->prs_shadow[tid].valid = false;
+ }
}
}

--
2.20.1

2019-06-10 16:39:59

by David Miller

Subject: Re: [PATCH net 1/2] net: mvpp2: prs: Fix parser range for VID filtering

Please start providing proper header postings with each and every patch
series, explaining at a high level what the patch series is doing, how
it is doing it, and why it is doing it that way.

Thanks.

2019-06-11 07:01:40

by Maxime Chevallier

Subject: Re: [PATCH net 1/2] net: mvpp2: prs: Fix parser range for VID filtering

Hello David,

On Mon, 10 Jun 2019 09:23:00 -0700 (PDT)
David Miller <[email protected]> wrote:

>Please start providing proper header postings with each and every patch
>series, explaining at a high level what the patch series is doing, how
>it is doing it, and why it is doing it that way.

Sure, I'll resend with a proper cover-letter, sorry about that.

Thanks,

Maxime