There is a bit of mess between cros-ec mfd includes and platform
includes. For example, we have a linux/mfd/cros_ec.h include that
exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
we have a linux/mfd/cros_ec_commands.h file that is non related to the
multifunction device (in the sense that is not exporting any function of
the mfd device). This causes crossed includes between mfd and
platform/chrome subsystems and makes the code difficult to read, apart
from creating 'curious' situations where a platform/chrome driver includes
a linux/mfd/cros_ec.h file just to get the exported functions that are
implemented in another platform/chrome driver.
In order to have a better separation on what the cros-ec multifunction
driver does and what the cros-ec core provides move and rework the
affected includes doing:
- Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
- Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
driver from include/linux/mfd/cros_ec.h to a new file
include/linux/platform_data/cros_ec_proto.h
- Update all the drivers with the new includes, so
- Drivers that only need to know about the protocol include
- linux/platform_data/cros_ec_proto.h
- linux/platform_data/cros_ec_commands.h
- Drivers that need to know about the cros-ec mfd device also include
- linux/mfd/cros_ec.h
Signed-off-by: Enric Balletbo i Serra <[email protected]>
---
drivers/extcon/extcon-usbc-cros-ec.c | 3 +-
drivers/hid/hid-google-hammer.c | 4 +-
drivers/i2c/busses/i2c-cros-ec-tunnel.c | 4 +-
drivers/iio/accel/cros_ec_accel_legacy.c | 3 +-
.../common/cros_ec_sensors/cros_ec_sensors.c | 3 +-
.../cros_ec_sensors/cros_ec_sensors_core.c | 3 +-
drivers/iio/light/cros_ec_light_prox.c | 3 +-
drivers/iio/pressure/cros_ec_baro.c | 3 +-
drivers/input/keyboard/cros_ec_keyb.c | 4 +-
.../media/platform/cros-ec-cec/cros-ec-cec.c | 4 +-
drivers/mfd/cros_ec_dev.c | 3 +-
drivers/platform/chrome/cros_ec.c | 3 +-
drivers/platform/chrome/cros_ec_chardev.c | 4 +-
drivers/platform/chrome/cros_ec_debugfs.c | 3 +-
drivers/platform/chrome/cros_ec_i2c.c | 4 +-
drivers/platform/chrome/cros_ec_lightbar.c | 3 +-
drivers/platform/chrome/cros_ec_lpc.c | 4 +-
drivers/platform/chrome/cros_ec_lpc_reg.c | 4 +-
drivers/platform/chrome/cros_ec_proto.c | 3 +-
drivers/platform/chrome/cros_ec_rpmsg.c | 4 +-
drivers/platform/chrome/cros_ec_spi.c | 4 +-
drivers/platform/chrome/cros_ec_sysfs.c | 3 +-
drivers/platform/chrome/cros_ec_trace.c | 2 +-
drivers/platform/chrome/cros_ec_trace.h | 4 +-
drivers/platform/chrome/cros_ec_vbc.c | 3 +-
drivers/platform/chrome/cros_usbpd_logger.c | 5 +-
drivers/power/supply/cros_usbpd-charger.c | 5 +-
drivers/pwm/pwm-cros-ec.c | 4 +-
drivers/rtc/rtc-cros-ec.c | 3 +-
.../linux/iio/common/cros_ec_sensors_core.h | 3 +-
include/linux/mfd/cros_ec.h | 306 -----------------
.../{mfd => platform_data}/cros_ec_commands.h | 0
include/linux/platform_data/cros_ec_proto.h | 315 ++++++++++++++++++
sound/soc/codecs/cros_ec_codec.c | 4 +-
34 files changed, 379 insertions(+), 351 deletions(-)
rename include/linux/{mfd => platform_data}/cros_ec_commands.h (100%)
create mode 100644 include/linux/platform_data/cros_ec_proto.h
diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c
index 43c0a936ab82..5290cc2d19d9 100644
--- a/drivers/extcon/extcon-usbc-cros-ec.c
+++ b/drivers/extcon/extcon-usbc-cros-ec.c
@@ -6,10 +6,11 @@
#include <linux/extcon-provider.h>
#include <linux/kernel.h>
-#include <linux/mfd/cros_ec.h>
#include <linux/module.h>
#include <linux/notifier.h>
#include <linux/of.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/sched.h>
diff --git a/drivers/hid/hid-google-hammer.c b/drivers/hid/hid-google-hammer.c
index ee5e0bdcf078..84f8c127ebdc 100644
--- a/drivers/hid/hid-google-hammer.c
+++ b/drivers/hid/hid-google-hammer.c
@@ -16,9 +16,9 @@
#include <linux/acpi.h>
#include <linux/hid.h>
#include <linux/leds.h>
-#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/pm_wakeup.h>
#include <asm/unaligned.h>
diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
index 82bcd9a78759..c551aa96a2e3 100644
--- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
+++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
@@ -5,8 +5,8 @@
#include <linux/module.h>
#include <linux/i2c.h>
-#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c
index 46bb2e421bb9..fd9a634f741e 100644
--- a/drivers/iio/accel/cros_ec_accel_legacy.c
+++ b/drivers/iio/accel/cros_ec_accel_legacy.c
@@ -18,9 +18,10 @@
#include <linux/iio/triggered_buffer.h>
#include <linux/kernel.h>
#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#define DRV_NAME "cros-ec-accel-legacy"
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
index 17af4e0fd5f8..40dc24ff0ee5 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
@@ -17,8 +17,9 @@
#include <linux/iio/triggered_buffer.h>
#include <linux/kernel.h>
#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
index 719a0df5aeeb..fd63315399ac 100644
--- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
@@ -14,9 +14,10 @@
#include <linux/iio/trigger_consumer.h>
#include <linux/kernel.h>
#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
static char *cros_ec_loc[] = {
diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
index 308ee6ff2e22..437e0eae9178 100644
--- a/drivers/iio/light/cros_ec_light_prox.c
+++ b/drivers/iio/light/cros_ec_light_prox.c
@@ -15,8 +15,9 @@
#include <linux/iio/trigger_consumer.h>
#include <linux/kernel.h>
#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c
index 034ce98d6e97..956dc01f1295 100644
--- a/drivers/iio/pressure/cros_ec_baro.c
+++ b/drivers/iio/pressure/cros_ec_baro.c
@@ -15,9 +15,10 @@
#include <linux/iio/trigger_consumer.h>
#include <linux/kernel.h>
#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
/*
diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
index d56001181598..2b71c5a51f90 100644
--- a/drivers/input/keyboard/cros_ec_keyb.c
+++ b/drivers/input/keyboard/cros_ec_keyb.c
@@ -22,8 +22,8 @@
#include <linux/slab.h>
#include <linux/sysrq.h>
#include <linux/input/matrix_keypad.h>
-#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <asm/unaligned.h>
diff --git a/drivers/media/platform/cros-ec-cec/cros-ec-cec.c b/drivers/media/platform/cros-ec-cec/cros-ec-cec.c
index 068df9888dbf..2e4e263a4a94 100644
--- a/drivers/media/platform/cros-ec-cec/cros-ec-cec.c
+++ b/drivers/media/platform/cros-ec-cec/cros-ec-cec.c
@@ -16,8 +16,8 @@
#include <linux/interrupt.h>
#include <media/cec.h>
#include <media/cec-notifier.h>
-#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#define DRV_NAME "cros-ec-cec"
diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index c7a5dfa36874..5481df4e1216 100644
--- a/drivers/mfd/cros_ec_dev.c
+++ b/drivers/mfd/cros_ec_dev.c
@@ -7,11 +7,12 @@
#include <linux/mfd/core.h>
#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/slab.h>
#define DRV_NAME "cros-ec-dev"
diff --git a/drivers/platform/chrome/cros_ec.c b/drivers/platform/chrome/cros_ec.c
index 11fced7917fc..9800597ccd96 100644
--- a/drivers/platform/chrome/cros_ec.c
+++ b/drivers/platform/chrome/cros_ec.c
@@ -21,7 +21,8 @@
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/module.h>
-#include <linux/mfd/cros_ec.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/suspend.h>
#include <asm/unaligned.h>
diff --git a/drivers/platform/chrome/cros_ec_chardev.c b/drivers/platform/chrome/cros_ec_chardev.c
index 1a0a27080026..786b941a60df 100644
--- a/drivers/platform/chrome/cros_ec_chardev.c
+++ b/drivers/platform/chrome/cros_ec_chardev.c
@@ -9,10 +9,10 @@
#include <linux/device.h>
#include <linux/fs.h>
#include <linux/list.h>
-#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
diff --git a/drivers/platform/chrome/cros_ec_debugfs.c b/drivers/platform/chrome/cros_ec_debugfs.c
index 4c2a27f6a6d0..b088d91be9c9 100644
--- a/drivers/platform/chrome/cros_ec_debugfs.c
+++ b/drivers/platform/chrome/cros_ec_debugfs.c
@@ -8,9 +8,10 @@
#include <linux/delay.h>
#include <linux/fs.h>
#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
#include <linux/mutex.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/poll.h>
#include <linux/sched.h>
diff --git a/drivers/platform/chrome/cros_ec_i2c.c b/drivers/platform/chrome/cros_ec_i2c.c
index 6bb82dfa7dae..9bd97bc8454b 100644
--- a/drivers/platform/chrome/cros_ec_i2c.c
+++ b/drivers/platform/chrome/cros_ec_i2c.c
@@ -9,8 +9,8 @@
#include <linux/module.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
-#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
diff --git a/drivers/platform/chrome/cros_ec_lightbar.c b/drivers/platform/chrome/cros_ec_lightbar.c
index d30a6650b0b5..caa26da2c788 100644
--- a/drivers/platform/chrome/cros_ec_lightbar.c
+++ b/drivers/platform/chrome/cros_ec_lightbar.c
@@ -9,8 +9,9 @@
#include <linux/fs.h>
#include <linux/kobject.h>
#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/sched.h>
#include <linux/types.h>
diff --git a/drivers/platform/chrome/cros_ec_lpc.c b/drivers/platform/chrome/cros_ec_lpc.c
index 2c7e654cf89c..0c976e95998a 100644
--- a/drivers/platform/chrome/cros_ec_lpc.c
+++ b/drivers/platform/chrome/cros_ec_lpc.c
@@ -16,9 +16,9 @@
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/interrupt.h>
-#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/printk.h>
#include <linux/suspend.h>
diff --git a/drivers/platform/chrome/cros_ec_lpc_reg.c b/drivers/platform/chrome/cros_ec_lpc_reg.c
index 0f5cd0ac8b49..dec9a779e209 100644
--- a/drivers/platform/chrome/cros_ec_lpc_reg.c
+++ b/drivers/platform/chrome/cros_ec_lpc_reg.c
@@ -4,8 +4,8 @@
// Copyright (C) 2016 Google, Inc
#include <linux/io.h>
-#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include "cros_ec_lpc_mec.h"
diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
index 3d2325197a68..f659f96bda12 100644
--- a/drivers/platform/chrome/cros_ec_proto.c
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -3,10 +3,11 @@
//
// Copyright (C) 2015 Google, Inc
-#include <linux/mfd/cros_ec.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/slab.h>
#include <asm/unaligned.h>
diff --git a/drivers/platform/chrome/cros_ec_rpmsg.c b/drivers/platform/chrome/cros_ec_rpmsg.c
index 520e507bfa54..9633e5417686 100644
--- a/drivers/platform/chrome/cros_ec_rpmsg.c
+++ b/drivers/platform/chrome/cros_ec_rpmsg.c
@@ -6,9 +6,9 @@
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/of.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/rpmsg.h>
#include <linux/slab.h>
diff --git a/drivers/platform/chrome/cros_ec_spi.c b/drivers/platform/chrome/cros_ec_spi.c
index 2e21f2776063..9006e1872942 100644
--- a/drivers/platform/chrome/cros_ec_spi.c
+++ b/drivers/platform/chrome/cros_ec_spi.c
@@ -6,9 +6,9 @@
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/of.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spi/spi.h>
diff --git a/drivers/platform/chrome/cros_ec_sysfs.c b/drivers/platform/chrome/cros_ec_sysfs.c
index fe0b7614ae1b..0caeb8d0989d 100644
--- a/drivers/platform/chrome/cros_ec_sysfs.c
+++ b/drivers/platform/chrome/cros_ec_sysfs.c
@@ -9,8 +9,9 @@
#include <linux/fs.h>
#include <linux/kobject.h>
#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/printk.h>
#include <linux/slab.h>
diff --git a/drivers/platform/chrome/cros_ec_trace.c b/drivers/platform/chrome/cros_ec_trace.c
index 0a76412095a9..6f80ff4532ae 100644
--- a/drivers/platform/chrome/cros_ec_trace.c
+++ b/drivers/platform/chrome/cros_ec_trace.c
@@ -6,7 +6,7 @@
#define TRACE_SYMBOL(a) {a, #a}
// Generate the list using the following script:
-// sed -n 's/^#define \(EC_CMD_[[:alnum:]_]*\)\s.*/\tTRACE_SYMBOL(\1), \\/p' include/linux/mfd/cros_ec_commands.h
+// sed -n 's/^#define \(EC_CMD_[[:alnum:]_]*\)\s.*/\tTRACE_SYMBOL(\1), \\/p' include/linux/platform_data/cros_ec_commands.h
#define EC_CMDS \
TRACE_SYMBOL(EC_CMD_PROTO_VERSION), \
TRACE_SYMBOL(EC_CMD_HELLO), \
diff --git a/drivers/platform/chrome/cros_ec_trace.h b/drivers/platform/chrome/cros_ec_trace.h
index 7ae3b89c78b9..0dd4df30fa89 100644
--- a/drivers/platform/chrome/cros_ec_trace.h
+++ b/drivers/platform/chrome/cros_ec_trace.h
@@ -11,8 +11,10 @@
#if !defined(_CROS_EC_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
#define _CROS_EC_TRACE_H_
+#include <linux/bits.h>
#include <linux/types.h>
-#include <linux/mfd/cros_ec.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/tracepoint.h>
diff --git a/drivers/platform/chrome/cros_ec_vbc.c b/drivers/platform/chrome/cros_ec_vbc.c
index 8392a1ec33a7..cffe119e7a7a 100644
--- a/drivers/platform/chrome/cros_ec_vbc.c
+++ b/drivers/platform/chrome/cros_ec_vbc.c
@@ -7,8 +7,9 @@
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/slab.h>
#define DRV_NAME "cros-ec-vbc"
diff --git a/drivers/platform/chrome/cros_usbpd_logger.c b/drivers/platform/chrome/cros_usbpd_logger.c
index 7c7b267626a0..c549a9b49b56 100644
--- a/drivers/platform/chrome/cros_usbpd_logger.c
+++ b/drivers/platform/chrome/cros_usbpd_logger.c
@@ -6,10 +6,11 @@
*/
#include <linux/ktime.h>
-#include <linux/math64.h>
#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
+#include <linux/math64.h>
#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
diff --git a/drivers/power/supply/cros_usbpd-charger.c b/drivers/power/supply/cros_usbpd-charger.c
index 3a9ea94c3de3..6cc7c3910e09 100644
--- a/drivers/power/supply/cros_usbpd-charger.c
+++ b/drivers/power/supply/cros_usbpd-charger.c
@@ -5,9 +5,10 @@
* Copyright (c) 2014 - 2018 Google, Inc
*/
-#include <linux/module.h>
#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
+#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/slab.h>
diff --git a/drivers/pwm/pwm-cros-ec.c b/drivers/pwm/pwm-cros-ec.c
index 98f6ac6cf6ab..85bea2d40b7d 100644
--- a/drivers/pwm/pwm-cros-ec.c
+++ b/drivers/pwm/pwm-cros-ec.c
@@ -6,8 +6,8 @@
*/
#include <linux/module.h>
-#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
diff --git a/drivers/rtc/rtc-cros-ec.c b/drivers/rtc/rtc-cros-ec.c
index 4d6bf9304ceb..6909e01936d9 100644
--- a/drivers/rtc/rtc-cros-ec.c
+++ b/drivers/rtc/rtc-cros-ec.c
@@ -6,8 +6,9 @@
#include <linux/kernel.h>
#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <linux/rtc.h>
#include <linux/slab.h>
diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
index ce16445411ac..8a91669f5bed 100644
--- a/include/linux/iio/common/cros_ec_sensors_core.h
+++ b/include/linux/iio/common/cros_ec_sensors_core.h
@@ -18,7 +18,8 @@
#include <linux/iio/iio.h>
#include <linux/irqreturn.h>
-#include <linux/mfd/cros_ec.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
enum {
CROS_EC_SENSOR_X,
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
index 2a1372d167b9..e0bae49535e1 100644
--- a/include/linux/mfd/cros_ec.h
+++ b/include/linux/mfd/cros_ec.h
@@ -16,184 +16,7 @@
#ifndef __LINUX_MFD_CROS_EC_H
#define __LINUX_MFD_CROS_EC_H
-#include <linux/cdev.h>
#include <linux/device.h>
-#include <linux/notifier.h>
-#include <linux/mfd/cros_ec_commands.h>
-#include <linux/mutex.h>
-
-#define CROS_EC_DEV_NAME "cros_ec"
-#define CROS_EC_DEV_FP_NAME "cros_fp"
-#define CROS_EC_DEV_PD_NAME "cros_pd"
-#define CROS_EC_DEV_TP_NAME "cros_tp"
-#define CROS_EC_DEV_ISH_NAME "cros_ish"
-
-/*
- * The EC is unresponsive for a time after a reboot command. Add a
- * simple delay to make sure that the bus stays locked.
- */
-#define EC_REBOOT_DELAY_MS 50
-
-/*
- * Max bus-specific overhead incurred by request/responses.
- * I2C requires 1 additional byte for requests.
- * I2C requires 2 additional bytes for responses.
- * SPI requires up to 32 additional bytes for responses.
- */
-#define EC_PROTO_VERSION_UNKNOWN 0
-#define EC_MAX_REQUEST_OVERHEAD 1
-#define EC_MAX_RESPONSE_OVERHEAD 32
-
-/*
- * Command interface between EC and AP, for LPC, I2C and SPI interfaces.
- */
-enum {
- EC_MSG_TX_HEADER_BYTES = 3,
- EC_MSG_TX_TRAILER_BYTES = 1,
- EC_MSG_TX_PROTO_BYTES = EC_MSG_TX_HEADER_BYTES +
- EC_MSG_TX_TRAILER_BYTES,
- EC_MSG_RX_PROTO_BYTES = 3,
-
- /* Max length of messages for proto 2*/
- EC_PROTO2_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE +
- EC_MSG_TX_PROTO_BYTES,
-
- EC_MAX_MSG_BYTES = 64 * 1024,
-};
-
-/**
- * struct cros_ec_command - Information about a ChromeOS EC command.
- * @version: Command version number (often 0).
- * @command: Command to send (EC_CMD_...).
- * @outsize: Outgoing length in bytes.
- * @insize: Max number of bytes to accept from the EC.
- * @result: EC's response to the command (separate from communication failure).
- * @data: Where to put the incoming data from EC and outgoing data to EC.
- */
-struct cros_ec_command {
- uint32_t version;
- uint32_t command;
- uint32_t outsize;
- uint32_t insize;
- uint32_t result;
- uint8_t data[0];
-};
-
-/**
- * struct cros_ec_device - Information about a ChromeOS EC device.
- * @phys_name: Name of physical comms layer (e.g. 'i2c-4').
- * @dev: Device pointer for physical comms device
- * @was_wake_device: True if this device was set to wake the system from
- * sleep at the last suspend.
- * @cros_class: The class structure for this device.
- * @cmd_readmem: Direct read of the EC memory-mapped region, if supported.
- * @offset: Is within EC_LPC_ADDR_MEMMAP region.
- * @bytes: Number of bytes to read. zero means "read a string" (including
- * the trailing '\0'). At most only EC_MEMMAP_SIZE bytes can be
- * read. Caller must ensure that the buffer is large enough for the
- * result when reading a string.
- * @max_request: Max size of message requested.
- * @max_response: Max size of message response.
- * @max_passthru: Max sice of passthru message.
- * @proto_version: The protocol version used for this device.
- * @priv: Private data.
- * @irq: Interrupt to use.
- * @id: Device id.
- * @din: Input buffer (for data from EC). This buffer will always be
- * dword-aligned and include enough space for up to 7 word-alignment
- * bytes also, so we can ensure that the body of the message is always
- * dword-aligned (64-bit). We use this alignment to keep ARM and x86
- * happy. Probably word alignment would be OK, there might be a small
- * performance advantage to using dword.
- * @dout: Output buffer (for data to EC). This buffer will always be
- * dword-aligned and include enough space for up to 7 word-alignment
- * bytes also, so we can ensure that the body of the message is always
- * dword-aligned (64-bit). We use this alignment to keep ARM and x86
- * happy. Probably word alignment would be OK, there might be a small
- * performance advantage to using dword.
- * @din_size: Size of din buffer to allocate (zero to use static din).
- * @dout_size: Size of dout buffer to allocate (zero to use static dout).
- * @wake_enabled: True if this device can wake the system from sleep.
- * @suspended: True if this device had been suspended.
- * @cmd_xfer: Send command to EC and get response.
- * Returns the number of bytes received if the communication
- * succeeded, but that doesn't mean the EC was happy with the
- * command. The caller should check msg.result for the EC's result
- * code.
- * @pkt_xfer: Send packet to EC and get response.
- * @lock: One transaction at a time.
- * @mkbp_event_supported: True if this EC supports the MKBP event protocol.
- * @host_sleep_v1: True if this EC supports the sleep v1 command.
- * @event_notifier: Interrupt event notifier for transport devices.
- * @event_data: Raw payload transferred with the MKBP event.
- * @event_size: Size in bytes of the event data.
- * @host_event_wake_mask: Mask of host events that cause wake from suspend.
- * @ec: The platform_device used by the mfd driver to interface with the
- * main EC.
- * @pd: The platform_device used by the mfd driver to interface with the
- * PD behind an EC.
- */
-struct cros_ec_device {
- /* These are used by other drivers that want to talk to the EC */
- const char *phys_name;
- struct device *dev;
- bool was_wake_device;
- struct class *cros_class;
- int (*cmd_readmem)(struct cros_ec_device *ec, unsigned int offset,
- unsigned int bytes, void *dest);
-
- /* These are used to implement the platform-specific interface */
- u16 max_request;
- u16 max_response;
- u16 max_passthru;
- u16 proto_version;
- void *priv;
- int irq;
- u8 *din;
- u8 *dout;
- int din_size;
- int dout_size;
- bool wake_enabled;
- bool suspended;
- int (*cmd_xfer)(struct cros_ec_device *ec,
- struct cros_ec_command *msg);
- int (*pkt_xfer)(struct cros_ec_device *ec,
- struct cros_ec_command *msg);
- struct mutex lock;
- bool mkbp_event_supported;
- bool host_sleep_v1;
- struct blocking_notifier_head event_notifier;
-
- struct ec_response_get_next_event_v1 event_data;
- int event_size;
- u32 host_event_wake_mask;
-
- /* The platform devices used by the mfd driver */
- struct platform_device *ec;
- struct platform_device *pd;
-};
-
-/**
- * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information.
- * @sensor_num: Id of the sensor, as reported by the EC.
- */
-struct cros_ec_sensor_platform {
- u8 sensor_num;
-};
-
-/**
- * struct cros_ec_platform - ChromeOS EC platform information.
- * @ec_name: Name of EC device (e.g. 'cros-ec', 'cros-pd', ...)
- * used in /dev/ and sysfs.
- * @cmd_offset: Offset to apply for each command. Set when
- * registering a device behind another one.
- */
-struct cros_ec_platform {
- const char *ec_name;
- u16 cmd_offset;
-};
-
-struct cros_ec_debugfs;
/**
* struct cros_ec_dev - ChromeOS EC device entry point.
@@ -217,133 +40,4 @@ struct cros_ec_dev {
#define to_cros_ec_dev(dev) container_of(dev, struct cros_ec_dev, class_dev)
-/**
- * cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device.
- * @ec_dev: Device to suspend.
- *
- * This can be called by drivers to handle a suspend event.
- *
- * Return: 0 on success or negative error code.
- */
-int cros_ec_suspend(struct cros_ec_device *ec_dev);
-
-/**
- * cros_ec_resume() - Handle a resume operation for the ChromeOS EC device.
- * @ec_dev: Device to resume.
- *
- * This can be called by drivers to handle a resume event.
- *
- * Return: 0 on success or negative error code.
- */
-int cros_ec_resume(struct cros_ec_device *ec_dev);
-
-/**
- * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer.
- * @ec_dev: Device to register.
- * @msg: Message to write.
- *
- * This is intended to be used by all ChromeOS EC drivers, but at present
- * only SPI uses it. Once LPC uses the same protocol it can start using it.
- * I2C could use it now, with a refactor of the existing code.
- *
- * Return: 0 on success or negative error code.
- */
-int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
- struct cros_ec_command *msg);
-
-/**
- * cros_ec_check_result() - Check ec_msg->result.
- * @ec_dev: EC device.
- * @msg: Message to check.
- *
- * This is used by ChromeOS EC drivers to check the ec_msg->result for
- * errors and to warn about them.
- *
- * Return: 0 on success or negative error code.
- */
-int cros_ec_check_result(struct cros_ec_device *ec_dev,
- struct cros_ec_command *msg);
-
-/**
- * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC.
- * @ec_dev: EC device.
- * @msg: Message to write.
- *
- * Call this to send a command to the ChromeOS EC. This should be used
- * instead of calling the EC's cmd_xfer() callback directly.
- *
- * Return: 0 on success or negative error code.
- */
-int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
- struct cros_ec_command *msg);
-
-/**
- * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC.
- * @ec_dev: EC device.
- * @msg: Message to write.
- *
- * This function is identical to cros_ec_cmd_xfer, except it returns success
- * status only if both the command was transmitted successfully and the EC
- * replied with success status. It's not necessary to check msg->result when
- * using this function.
- *
- * Return: The number of bytes transferred on success or negative error code.
- */
-int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
- struct cros_ec_command *msg);
-
-/**
- * cros_ec_register() - Register a new ChromeOS EC, using the provided info.
- * @ec_dev: Device to register.
- *
- * Before calling this, allocate a pointer to a new device and then fill
- * in all the fields up to the --private-- marker.
- *
- * Return: 0 on success or negative error code.
- */
-int cros_ec_register(struct cros_ec_device *ec_dev);
-
-/**
- * cros_ec_unregister() - Remove a ChromeOS EC.
- * @ec_dev: Device to unregister.
- *
- * Call this to deregister a ChromeOS EC, then clean up any private data.
- *
- * Return: 0 on success or negative error code.
- */
-int cros_ec_unregister(struct cros_ec_device *ec_dev);
-
-/**
- * cros_ec_query_all() - Query the protocol version supported by the
- * ChromeOS EC.
- * @ec_dev: Device to register.
- *
- * Return: 0 on success or negative error code.
- */
-int cros_ec_query_all(struct cros_ec_device *ec_dev);
-
-/**
- * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC.
- * @ec_dev: Device to fetch event from.
- * @wake_event: Pointer to a bool set to true upon return if the event might be
- * treated as a wake event. Ignored if null.
- *
- * Return: negative error code on errors; 0 for no data; or else number of
- * bytes received (i.e., an event was retrieved successfully). Event types are
- * written out to @ec_dev->event_data.event_type on success.
- */
-int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event);
-
-/**
- * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC.
- * @ec_dev: Device to fetch event from.
- *
- * When MKBP is supported, when the EC raises an interrupt, we collect the
- * events raised and call the functions in the ec notifier. This function
- * is a helper to know which events are raised.
- *
- * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*.
- */
-u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev);
-
#endif /* __LINUX_MFD_CROS_EC_H */
diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
similarity index 100%
rename from include/linux/mfd/cros_ec_commands.h
rename to include/linux/platform_data/cros_ec_commands.h
diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h
new file mode 100644
index 000000000000..34dd9e5c1779
--- /dev/null
+++ b/include/linux/platform_data/cros_ec_proto.h
@@ -0,0 +1,315 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * ChromeOS Embedded Controller protocol interface.
+ *
+ * Copyright (C) 2012 Google, Inc
+ */
+
+#ifndef __LINUX_CROS_EC_PROTO_H
+#define __LINUX_CROS_EC_PROTO_H
+
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+
+#define CROS_EC_DEV_NAME "cros_ec"
+#define CROS_EC_DEV_FP_NAME "cros_fp"
+#define CROS_EC_DEV_ISH_NAME "cros_ish"
+#define CROS_EC_DEV_PD_NAME "cros_pd"
+#define CROS_EC_DEV_TP_NAME "cros_tp"
+
+/*
+ * The EC is unresponsive for a time after a reboot command. Add a
+ * simple delay to make sure that the bus stays locked.
+ */
+#define EC_REBOOT_DELAY_MS 50
+
+/*
+ * Max bus-specific overhead incurred by request/responses.
+ * I2C requires 1 additional byte for requests.
+ * I2C requires 2 additional bytes for responses.
+ * SPI requires up to 32 additional bytes for responses.
+ */
+#define EC_PROTO_VERSION_UNKNOWN 0
+#define EC_MAX_REQUEST_OVERHEAD 1
+#define EC_MAX_RESPONSE_OVERHEAD 32
+
+/*
+ * Command interface between EC and AP, for LPC, I2C and SPI interfaces.
+ */
+enum {
+ EC_MSG_TX_HEADER_BYTES = 3,
+ EC_MSG_TX_TRAILER_BYTES = 1,
+ EC_MSG_TX_PROTO_BYTES = EC_MSG_TX_HEADER_BYTES +
+ EC_MSG_TX_TRAILER_BYTES,
+ EC_MSG_RX_PROTO_BYTES = 3,
+
+ /* Max length of messages for proto 2*/
+ EC_PROTO2_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE +
+ EC_MSG_TX_PROTO_BYTES,
+
+ EC_MAX_MSG_BYTES = 64 * 1024,
+};
+
+/**
+ * struct cros_ec_command - Information about a ChromeOS EC command.
+ * @version: Command version number (often 0).
+ * @command: Command to send (EC_CMD_...).
+ * @outsize: Outgoing length in bytes.
+ * @insize: Max number of bytes to accept from the EC.
+ * @result: EC's response to the command (separate from communication failure).
+ * @data: Where to put the incoming data from EC and outgoing data to EC.
+ */
+struct cros_ec_command {
+ uint32_t version;
+ uint32_t command;
+ uint32_t outsize;
+ uint32_t insize;
+ uint32_t result;
+ uint8_t data[0];
+};
+
+/**
+ * struct cros_ec_device - Information about a ChromeOS EC device.
+ * @phys_name: Name of physical comms layer (e.g. 'i2c-4').
+ * @dev: Device pointer for physical comms device
+ * @was_wake_device: True if this device was set to wake the system from
+ * sleep at the last suspend.
+ * @cros_class: The class structure for this device.
+ * @cmd_readmem: Direct read of the EC memory-mapped region, if supported.
+ * @offset: Is within EC_LPC_ADDR_MEMMAP region.
+ * @bytes: Number of bytes to read. zero means "read a string" (including
+ * the trailing '\0'). At most only EC_MEMMAP_SIZE bytes can be
+ * read. Caller must ensure that the buffer is large enough for the
+ * result when reading a string.
+ * @max_request: Max size of message requested.
+ * @max_response: Max size of message response.
+ * @max_passthru: Max sice of passthru message.
+ * @proto_version: The protocol version used for this device.
+ * @priv: Private data.
+ * @irq: Interrupt to use.
+ * @id: Device id.
+ * @din: Input buffer (for data from EC). This buffer will always be
+ * dword-aligned and include enough space for up to 7 word-alignment
+ * bytes also, so we can ensure that the body of the message is always
+ * dword-aligned (64-bit). We use this alignment to keep ARM and x86
+ * happy. Probably word alignment would be OK, there might be a small
+ * performance advantage to using dword.
+ * @dout: Output buffer (for data to EC). This buffer will always be
+ * dword-aligned and include enough space for up to 7 word-alignment
+ * bytes also, so we can ensure that the body of the message is always
+ * dword-aligned (64-bit). We use this alignment to keep ARM and x86
+ * happy. Probably word alignment would be OK, there might be a small
+ * performance advantage to using dword.
+ * @din_size: Size of din buffer to allocate (zero to use static din).
+ * @dout_size: Size of dout buffer to allocate (zero to use static dout).
+ * @wake_enabled: True if this device can wake the system from sleep.
+ * @suspended: True if this device had been suspended.
+ * @cmd_xfer: Send command to EC and get response.
+ * Returns the number of bytes received if the communication
+ * succeeded, but that doesn't mean the EC was happy with the
+ * command. The caller should check msg.result for the EC's result
+ * code.
+ * @pkt_xfer: Send packet to EC and get response.
+ * @lock: One transaction at a time.
+ * @mkbp_event_supported: True if this EC supports the MKBP event protocol.
+ * @host_sleep_v1: True if this EC supports the sleep v1 command.
+ * @event_notifier: Interrupt event notifier for transport devices.
+ * @event_data: Raw payload transferred with the MKBP event.
+ * @event_size: Size in bytes of the event data.
+ * @host_event_wake_mask: Mask of host events that cause wake from suspend.
+ * @ec: The platform_device used by the mfd driver to interface with the
+ * main EC.
+ * @pd: The platform_device used by the mfd driver to interface with the
+ * PD behind an EC.
+ */
+struct cros_ec_device {
+ /* These are used by other drivers that want to talk to the EC */
+ const char *phys_name;
+ struct device *dev;
+ bool was_wake_device;
+ struct class *cros_class;
+ int (*cmd_readmem)(struct cros_ec_device *ec, unsigned int offset,
+ unsigned int bytes, void *dest);
+
+ /* These are used to implement the platform-specific interface */
+ u16 max_request;
+ u16 max_response;
+ u16 max_passthru;
+ u16 proto_version;
+ void *priv;
+ int irq;
+ u8 *din;
+ u8 *dout;
+ int din_size;
+ int dout_size;
+ bool wake_enabled;
+ bool suspended;
+ int (*cmd_xfer)(struct cros_ec_device *ec,
+ struct cros_ec_command *msg);
+ int (*pkt_xfer)(struct cros_ec_device *ec,
+ struct cros_ec_command *msg);
+ struct mutex lock;
+ bool mkbp_event_supported;
+ bool host_sleep_v1;
+ struct blocking_notifier_head event_notifier;
+
+ struct ec_response_get_next_event_v1 event_data;
+ int event_size;
+ u32 host_event_wake_mask;
+
+ /* The platform devices used by the mfd driver */
+ struct platform_device *ec;
+ struct platform_device *pd;
+};
+
+/**
+ * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information.
+ * @sensor_num: Id of the sensor, as reported by the EC.
+ */
+struct cros_ec_sensor_platform {
+ u8 sensor_num;
+};
+
+/**
+ * struct cros_ec_platform - ChromeOS EC platform information.
+ * @ec_name: Name of EC device (e.g. 'cros-ec', 'cros-pd', ...)
+ * used in /dev/ and sysfs.
+ * @cmd_offset: Offset to apply for each command. Set when
+ * registering a device behind another one.
+ */
+struct cros_ec_platform {
+ const char *ec_name;
+ u16 cmd_offset;
+};
+
+/**
+ * cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device.
+ * @ec_dev: Device to suspend.
+ *
+ * This can be called by drivers to handle a suspend event.
+ *
+ * Return: 0 on success or negative error code.
+ */
+int cros_ec_suspend(struct cros_ec_device *ec_dev);
+
+/**
+ * cros_ec_resume() - Handle a resume operation for the ChromeOS EC device.
+ * @ec_dev: Device to resume.
+ *
+ * This can be called by drivers to handle a resume event.
+ *
+ * Return: 0 on success or negative error code.
+ */
+int cros_ec_resume(struct cros_ec_device *ec_dev);
+
+/**
+ * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer.
+ * @ec_dev: Device to register.
+ * @msg: Message to write.
+ *
+ * This is intended to be used by all ChromeOS EC drivers, but at present
+ * only SPI uses it. Once LPC uses the same protocol it can start using it.
+ * I2C could use it now, with a refactor of the existing code.
+ *
+ * Return: 0 on success or negative error code.
+ */
+int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
+ struct cros_ec_command *msg);
+
+/**
+ * cros_ec_check_result() - Check ec_msg->result.
+ * @ec_dev: EC device.
+ * @msg: Message to check.
+ *
+ * This is used by ChromeOS EC drivers to check the ec_msg->result for
+ * errors and to warn about them.
+ *
+ * Return: 0 on success or negative error code.
+ */
+int cros_ec_check_result(struct cros_ec_device *ec_dev,
+ struct cros_ec_command *msg);
+
+/**
+ * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC.
+ * @ec_dev: EC device.
+ * @msg: Message to write.
+ *
+ * Call this to send a command to the ChromeOS EC. This should be used
+ * instead of calling the EC's cmd_xfer() callback directly.
+ *
+ * Return: 0 on success or negative error code.
+ */
+int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
+ struct cros_ec_command *msg);
+
+/**
+ * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC.
+ * @ec_dev: EC device.
+ * @msg: Message to write.
+ *
+ * This function is identical to cros_ec_cmd_xfer, except it returns success
+ * status only if both the command was transmitted successfully and the EC
+ * replied with success status. It's not necessary to check msg->result when
+ * using this function.
+ *
+ * Return: The number of bytes transferred on success or negative error code.
+ */
+int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
+ struct cros_ec_command *msg);
+
+/**
+ * cros_ec_register() - Register a new ChromeOS EC, using the provided info.
+ * @ec_dev: Device to register.
+ *
+ * Before calling this, allocate a pointer to a new device and then fill
+ * in all the fields up to the --private-- marker.
+ *
+ * Return: 0 on success or negative error code.
+ */
+int cros_ec_register(struct cros_ec_device *ec_dev);
+
+/**
+ * cros_ec_unregister() - Remove a ChromeOS EC.
+ * @ec_dev: Device to unregister.
+ *
+ * Call this to deregister a ChromeOS EC, then clean up any private data.
+ *
+ * Return: 0 on success or negative error code.
+ */
+int cros_ec_unregister(struct cros_ec_device *ec_dev);
+
+/**
+ * cros_ec_query_all() - Query the protocol version supported by the
+ * ChromeOS EC.
+ * @ec_dev: Device to register.
+ *
+ * Return: 0 on success or negative error code.
+ */
+int cros_ec_query_all(struct cros_ec_device *ec_dev);
+
+/**
+ * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC.
+ * @ec_dev: Device to fetch event from.
+ * @wake_event: Pointer to a bool set to true upon return if the event might be
+ * treated as a wake event. Ignored if null.
+ *
+ * Return: negative error code on errors; 0 for no data; or else number of
+ * bytes received (i.e., an event was retrieved successfully). Event types are
+ * written out to @ec_dev->event_data.event_type on success.
+ */
+int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event);
+
+/**
+ * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC.
+ * @ec_dev: Device to fetch event from.
+ *
+ * When MKBP is supported, when the EC raises an interrupt, we collect the
+ * events raised and call the functions in the ec notifier. This function
+ * is a helper to know which events are raised.
+ *
+ * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*.
+ */
+u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev);
+
+#endif /* __LINUX_CROS_EC_PROTO_H */
diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
index 87830ed5ebf4..79bb4081d3c2 100644
--- a/sound/soc/codecs/cros_ec_codec.c
+++ b/sound/soc/codecs/cros_ec_codec.c
@@ -9,9 +9,9 @@
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/kernel.h>
-#include <linux/mfd/cros_ec.h>
-#include <linux/mfd/cros_ec_commands.h>
#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
#include <linux/platform_device.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
--
2.20.1
On Tue, Jun 04, 2019 at 05:20:15PM +0200, Enric Balletbo i Serra wrote:
> There is a bit of mess between cros-ec mfd includes and platform
> includes. For example, we have a linux/mfd/cros_ec.h include that
> exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
Acked-by: Mark Brown <[email protected]>
On Tue, Jun 04, 2019 at 05:20:15PM +0200, Enric Balletbo i Serra wrote:
> There is a bit of mess between cros-ec mfd includes and platform
> includes. For example, we have a linux/mfd/cros_ec.h include that
> exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
> we have a linux/mfd/cros_ec_commands.h file that is non related to the
> multifunction device (in the sense that is not exporting any function of
> the mfd device). This causes crossed includes between mfd and
> platform/chrome subsystems and makes the code difficult to read, apart
> from creating 'curious' situations where a platform/chrome driver includes
> a linux/mfd/cros_ec.h file just to get the exported functions that are
> implemented in another platform/chrome driver.
>
> In order to have a better separation on what the cros-ec multifunction
> driver does and what the cros-ec core provides move and rework the
> affected includes doing:
>
> - Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
> - Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
> driver from include/linux/mfd/cros_ec.h to a new file
> include/linux/platform_data/cros_ec_proto.h
> - Update all the drivers with the new includes, so
> - Drivers that only need to know about the protocol include
> - linux/platform_data/cros_ec_proto.h
> - linux/platform_data/cros_ec_commands.h
> - Drivers that need to know about the cros-ec mfd device also include
> - linux/mfd/cros_ec.h
>
> Signed-off-by: Enric Balletbo i Serra <[email protected]>
Acked-by: Wolfram Sang <[email protected]> (for the I2C part)
On 04/06/2019 17:20, Enric Balletbo i Serra wrote:
> There is a bit of mess between cros-ec mfd includes and platform
> includes. For example, we have a linux/mfd/cros_ec.h include that
> exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
> we have a linux/mfd/cros_ec_commands.h file that is non related to the
> multifunction device (in the sense that is not exporting any function of
> the mfd device). This causes crossed includes between mfd and
> platform/chrome subsystems and makes the code difficult to read, apart
> from creating 'curious' situations where a platform/chrome driver includes
> a linux/mfd/cros_ec.h file just to get the exported functions that are
> implemented in another platform/chrome driver.
>
> In order to have a better separation on what the cros-ec multifunction
> driver does and what the cros-ec core provides move and rework the
> affected includes doing:
>
> - Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
> - Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
> driver from include/linux/mfd/cros_ec.h to a new file
> include/linux/platform_data/cros_ec_proto.h
> - Update all the drivers with the new includes, so
> - Drivers that only need to know about the protocol include
> - linux/platform_data/cros_ec_proto.h
> - linux/platform_data/cros_ec_commands.h
> - Drivers that need to know about the cros-ec mfd device also include
> - linux/mfd/cros_ec.h
>
> Signed-off-by: Enric Balletbo i Serra <[email protected]>
> ---
>
> drivers/extcon/extcon-usbc-cros-ec.c | 3 +-
> drivers/hid/hid-google-hammer.c | 4 +-
> drivers/i2c/busses/i2c-cros-ec-tunnel.c | 4 +-
> drivers/iio/accel/cros_ec_accel_legacy.c | 3 +-
> .../common/cros_ec_sensors/cros_ec_sensors.c | 3 +-
> .../cros_ec_sensors/cros_ec_sensors_core.c | 3 +-
> drivers/iio/light/cros_ec_light_prox.c | 3 +-
> drivers/iio/pressure/cros_ec_baro.c | 3 +-
> drivers/input/keyboard/cros_ec_keyb.c | 4 +-
> .../media/platform/cros-ec-cec/cros-ec-cec.c | 4 +-
> drivers/mfd/cros_ec_dev.c | 3 +-
> drivers/platform/chrome/cros_ec.c | 3 +-
> drivers/platform/chrome/cros_ec_chardev.c | 4 +-
> drivers/platform/chrome/cros_ec_debugfs.c | 3 +-
> drivers/platform/chrome/cros_ec_i2c.c | 4 +-
> drivers/platform/chrome/cros_ec_lightbar.c | 3 +-
> drivers/platform/chrome/cros_ec_lpc.c | 4 +-
> drivers/platform/chrome/cros_ec_lpc_reg.c | 4 +-
> drivers/platform/chrome/cros_ec_proto.c | 3 +-
> drivers/platform/chrome/cros_ec_rpmsg.c | 4 +-
> drivers/platform/chrome/cros_ec_spi.c | 4 +-
> drivers/platform/chrome/cros_ec_sysfs.c | 3 +-
> drivers/platform/chrome/cros_ec_trace.c | 2 +-
> drivers/platform/chrome/cros_ec_trace.h | 4 +-
> drivers/platform/chrome/cros_ec_vbc.c | 3 +-
> drivers/platform/chrome/cros_usbpd_logger.c | 5 +-
> drivers/power/supply/cros_usbpd-charger.c | 5 +-
> drivers/pwm/pwm-cros-ec.c | 4 +-
> drivers/rtc/rtc-cros-ec.c | 3 +-
> .../linux/iio/common/cros_ec_sensors_core.h | 3 +-
> include/linux/mfd/cros_ec.h | 306 -----------------
> .../{mfd => platform_data}/cros_ec_commands.h | 0
> include/linux/platform_data/cros_ec_proto.h | 315 ++++++++++++++++++
> sound/soc/codecs/cros_ec_codec.c | 4 +-
> 34 files changed, 379 insertions(+), 351 deletions(-)
> rename include/linux/{mfd => platform_data}/cros_ec_commands.h (100%)
> create mode 100644 include/linux/platform_data/cros_ec_proto.h
>
Acked-by: Neil Armstrong <[email protected]> # for the cros-ec-cec part
On 04/06/2019 17:20:15+0200, Enric Balletbo i Serra wrote:
> There is a bit of mess between cros-ec mfd includes and platform
> includes. For example, we have a linux/mfd/cros_ec.h include that
> exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
> we have a linux/mfd/cros_ec_commands.h file that is non related to the
> multifunction device (in the sense that is not exporting any function of
> the mfd device). This causes crossed includes between mfd and
> platform/chrome subsystems and makes the code difficult to read, apart
> from creating 'curious' situations where a platform/chrome driver includes
> a linux/mfd/cros_ec.h file just to get the exported functions that are
> implemented in another platform/chrome driver.
>
> In order to have a better separation on what the cros-ec multifunction
> driver does and what the cros-ec core provides move and rework the
> affected includes doing:
>
> - Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
> - Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
> driver from include/linux/mfd/cros_ec.h to a new file
> include/linux/platform_data/cros_ec_proto.h
> - Update all the drivers with the new includes, so
> - Drivers that only need to know about the protocol include
> - linux/platform_data/cros_ec_proto.h
> - linux/platform_data/cros_ec_commands.h
> - Drivers that need to know about the cros-ec mfd device also include
> - linux/mfd/cros_ec.h
>
> Signed-off-by: Enric Balletbo i Serra <[email protected]>
Acked-by: Alexandre Belloni <[email protected]>
> ---
>
> drivers/extcon/extcon-usbc-cros-ec.c | 3 +-
> drivers/hid/hid-google-hammer.c | 4 +-
> drivers/i2c/busses/i2c-cros-ec-tunnel.c | 4 +-
> drivers/iio/accel/cros_ec_accel_legacy.c | 3 +-
> .../common/cros_ec_sensors/cros_ec_sensors.c | 3 +-
> .../cros_ec_sensors/cros_ec_sensors_core.c | 3 +-
> drivers/iio/light/cros_ec_light_prox.c | 3 +-
> drivers/iio/pressure/cros_ec_baro.c | 3 +-
> drivers/input/keyboard/cros_ec_keyb.c | 4 +-
> .../media/platform/cros-ec-cec/cros-ec-cec.c | 4 +-
> drivers/mfd/cros_ec_dev.c | 3 +-
> drivers/platform/chrome/cros_ec.c | 3 +-
> drivers/platform/chrome/cros_ec_chardev.c | 4 +-
> drivers/platform/chrome/cros_ec_debugfs.c | 3 +-
> drivers/platform/chrome/cros_ec_i2c.c | 4 +-
> drivers/platform/chrome/cros_ec_lightbar.c | 3 +-
> drivers/platform/chrome/cros_ec_lpc.c | 4 +-
> drivers/platform/chrome/cros_ec_lpc_reg.c | 4 +-
> drivers/platform/chrome/cros_ec_proto.c | 3 +-
> drivers/platform/chrome/cros_ec_rpmsg.c | 4 +-
> drivers/platform/chrome/cros_ec_spi.c | 4 +-
> drivers/platform/chrome/cros_ec_sysfs.c | 3 +-
> drivers/platform/chrome/cros_ec_trace.c | 2 +-
> drivers/platform/chrome/cros_ec_trace.h | 4 +-
> drivers/platform/chrome/cros_ec_vbc.c | 3 +-
> drivers/platform/chrome/cros_usbpd_logger.c | 5 +-
> drivers/power/supply/cros_usbpd-charger.c | 5 +-
> drivers/pwm/pwm-cros-ec.c | 4 +-
> drivers/rtc/rtc-cros-ec.c | 3 +-
> .../linux/iio/common/cros_ec_sensors_core.h | 3 +-
> include/linux/mfd/cros_ec.h | 306 -----------------
> .../{mfd => platform_data}/cros_ec_commands.h | 0
> include/linux/platform_data/cros_ec_proto.h | 315 ++++++++++++++++++
> sound/soc/codecs/cros_ec_codec.c | 4 +-
> 34 files changed, 379 insertions(+), 351 deletions(-)
> rename include/linux/{mfd => platform_data}/cros_ec_commands.h (100%)
> create mode 100644 include/linux/platform_data/cros_ec_proto.h
>
> diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c
> index 43c0a936ab82..5290cc2d19d9 100644
> --- a/drivers/extcon/extcon-usbc-cros-ec.c
> +++ b/drivers/extcon/extcon-usbc-cros-ec.c
> @@ -6,10 +6,11 @@
>
> #include <linux/extcon-provider.h>
> #include <linux/kernel.h>
> -#include <linux/mfd/cros_ec.h>
> #include <linux/module.h>
> #include <linux/notifier.h>
> #include <linux/of.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/sched.h>
> diff --git a/drivers/hid/hid-google-hammer.c b/drivers/hid/hid-google-hammer.c
> index ee5e0bdcf078..84f8c127ebdc 100644
> --- a/drivers/hid/hid-google-hammer.c
> +++ b/drivers/hid/hid-google-hammer.c
> @@ -16,9 +16,9 @@
> #include <linux/acpi.h>
> #include <linux/hid.h>
> #include <linux/leds.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/pm_wakeup.h>
> #include <asm/unaligned.h>
> diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> index 82bcd9a78759..c551aa96a2e3 100644
> --- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> @@ -5,8 +5,8 @@
>
> #include <linux/module.h>
> #include <linux/i2c.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c
> index 46bb2e421bb9..fd9a634f741e 100644
> --- a/drivers/iio/accel/cros_ec_accel_legacy.c
> +++ b/drivers/iio/accel/cros_ec_accel_legacy.c
> @@ -18,9 +18,10 @@
> #include <linux/iio/triggered_buffer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/slab.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
>
> #define DRV_NAME "cros-ec-accel-legacy"
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> index 17af4e0fd5f8..40dc24ff0ee5 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> @@ -17,8 +17,9 @@
> #include <linux/iio/triggered_buffer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> index 719a0df5aeeb..fd63315399ac 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> @@ -14,9 +14,10 @@
> #include <linux/iio/trigger_consumer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/slab.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
>
> static char *cros_ec_loc[] = {
> diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
> index 308ee6ff2e22..437e0eae9178 100644
> --- a/drivers/iio/light/cros_ec_light_prox.c
> +++ b/drivers/iio/light/cros_ec_light_prox.c
> @@ -15,8 +15,9 @@
> #include <linux/iio/trigger_consumer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c
> index 034ce98d6e97..956dc01f1295 100644
> --- a/drivers/iio/pressure/cros_ec_baro.c
> +++ b/drivers/iio/pressure/cros_ec_baro.c
> @@ -15,9 +15,10 @@
> #include <linux/iio/trigger_consumer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/slab.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
>
> /*
> diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
> index d56001181598..2b71c5a51f90 100644
> --- a/drivers/input/keyboard/cros_ec_keyb.c
> +++ b/drivers/input/keyboard/cros_ec_keyb.c
> @@ -22,8 +22,8 @@
> #include <linux/slab.h>
> #include <linux/sysrq.h>
> #include <linux/input/matrix_keypad.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> #include <asm/unaligned.h>
>
> diff --git a/drivers/media/platform/cros-ec-cec/cros-ec-cec.c b/drivers/media/platform/cros-ec-cec/cros-ec-cec.c
> index 068df9888dbf..2e4e263a4a94 100644
> --- a/drivers/media/platform/cros-ec-cec/cros-ec-cec.c
> +++ b/drivers/media/platform/cros-ec-cec/cros-ec-cec.c
> @@ -16,8 +16,8 @@
> #include <linux/interrupt.h>
> #include <media/cec.h>
> #include <media/cec-notifier.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> #define DRV_NAME "cros-ec-cec"
>
> diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
> index c7a5dfa36874..5481df4e1216 100644
> --- a/drivers/mfd/cros_ec_dev.c
> +++ b/drivers/mfd/cros_ec_dev.c
> @@ -7,11 +7,12 @@
>
> #include <linux/mfd/core.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/mod_devicetable.h>
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/slab.h>
>
> #define DRV_NAME "cros-ec-dev"
> diff --git a/drivers/platform/chrome/cros_ec.c b/drivers/platform/chrome/cros_ec.c
> index 11fced7917fc..9800597ccd96 100644
> --- a/drivers/platform/chrome/cros_ec.c
> +++ b/drivers/platform/chrome/cros_ec.c
> @@ -21,7 +21,8 @@
> #include <linux/interrupt.h>
> #include <linux/slab.h>
> #include <linux/module.h>
> -#include <linux/mfd/cros_ec.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/suspend.h>
> #include <asm/unaligned.h>
>
> diff --git a/drivers/platform/chrome/cros_ec_chardev.c b/drivers/platform/chrome/cros_ec_chardev.c
> index 1a0a27080026..786b941a60df 100644
> --- a/drivers/platform/chrome/cros_ec_chardev.c
> +++ b/drivers/platform/chrome/cros_ec_chardev.c
> @@ -9,10 +9,10 @@
> #include <linux/device.h>
> #include <linux/fs.h>
> #include <linux/list.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/miscdevice.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/spinlock.h>
> diff --git a/drivers/platform/chrome/cros_ec_debugfs.c b/drivers/platform/chrome/cros_ec_debugfs.c
> index 4c2a27f6a6d0..b088d91be9c9 100644
> --- a/drivers/platform/chrome/cros_ec_debugfs.c
> +++ b/drivers/platform/chrome/cros_ec_debugfs.c
> @@ -8,9 +8,10 @@
> #include <linux/delay.h>
> #include <linux/fs.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/mutex.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/poll.h>
> #include <linux/sched.h>
> diff --git a/drivers/platform/chrome/cros_ec_i2c.c b/drivers/platform/chrome/cros_ec_i2c.c
> index 6bb82dfa7dae..9bd97bc8454b 100644
> --- a/drivers/platform/chrome/cros_ec_i2c.c
> +++ b/drivers/platform/chrome/cros_ec_i2c.c
> @@ -9,8 +9,8 @@
> #include <linux/module.h>
> #include <linux/i2c.h>
> #include <linux/interrupt.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> diff --git a/drivers/platform/chrome/cros_ec_lightbar.c b/drivers/platform/chrome/cros_ec_lightbar.c
> index d30a6650b0b5..caa26da2c788 100644
> --- a/drivers/platform/chrome/cros_ec_lightbar.c
> +++ b/drivers/platform/chrome/cros_ec_lightbar.c
> @@ -9,8 +9,9 @@
> #include <linux/fs.h>
> #include <linux/kobject.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/sched.h>
> #include <linux/types.h>
> diff --git a/drivers/platform/chrome/cros_ec_lpc.c b/drivers/platform/chrome/cros_ec_lpc.c
> index 2c7e654cf89c..0c976e95998a 100644
> --- a/drivers/platform/chrome/cros_ec_lpc.c
> +++ b/drivers/platform/chrome/cros_ec_lpc.c
> @@ -16,9 +16,9 @@
> #include <linux/delay.h>
> #include <linux/io.h>
> #include <linux/interrupt.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/printk.h>
> #include <linux/suspend.h>
> diff --git a/drivers/platform/chrome/cros_ec_lpc_reg.c b/drivers/platform/chrome/cros_ec_lpc_reg.c
> index 0f5cd0ac8b49..dec9a779e209 100644
> --- a/drivers/platform/chrome/cros_ec_lpc_reg.c
> +++ b/drivers/platform/chrome/cros_ec_lpc_reg.c
> @@ -4,8 +4,8 @@
> // Copyright (C) 2016 Google, Inc
>
> #include <linux/io.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> #include "cros_ec_lpc_mec.h"
>
> diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
> index 3d2325197a68..f659f96bda12 100644
> --- a/drivers/platform/chrome/cros_ec_proto.c
> +++ b/drivers/platform/chrome/cros_ec_proto.c
> @@ -3,10 +3,11 @@
> //
> // Copyright (C) 2015 Google, Inc
>
> -#include <linux/mfd/cros_ec.h>
> #include <linux/delay.h>
> #include <linux/device.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/slab.h>
> #include <asm/unaligned.h>
>
> diff --git a/drivers/platform/chrome/cros_ec_rpmsg.c b/drivers/platform/chrome/cros_ec_rpmsg.c
> index 520e507bfa54..9633e5417686 100644
> --- a/drivers/platform/chrome/cros_ec_rpmsg.c
> +++ b/drivers/platform/chrome/cros_ec_rpmsg.c
> @@ -6,9 +6,9 @@
> #include <linux/delay.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/of.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/rpmsg.h>
> #include <linux/slab.h>
> diff --git a/drivers/platform/chrome/cros_ec_spi.c b/drivers/platform/chrome/cros_ec_spi.c
> index 2e21f2776063..9006e1872942 100644
> --- a/drivers/platform/chrome/cros_ec_spi.c
> +++ b/drivers/platform/chrome/cros_ec_spi.c
> @@ -6,9 +6,9 @@
> #include <linux/delay.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/of.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/spi/spi.h>
> diff --git a/drivers/platform/chrome/cros_ec_sysfs.c b/drivers/platform/chrome/cros_ec_sysfs.c
> index fe0b7614ae1b..0caeb8d0989d 100644
> --- a/drivers/platform/chrome/cros_ec_sysfs.c
> +++ b/drivers/platform/chrome/cros_ec_sysfs.c
> @@ -9,8 +9,9 @@
> #include <linux/fs.h>
> #include <linux/kobject.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/printk.h>
> #include <linux/slab.h>
> diff --git a/drivers/platform/chrome/cros_ec_trace.c b/drivers/platform/chrome/cros_ec_trace.c
> index 0a76412095a9..6f80ff4532ae 100644
> --- a/drivers/platform/chrome/cros_ec_trace.c
> +++ b/drivers/platform/chrome/cros_ec_trace.c
> @@ -6,7 +6,7 @@
> #define TRACE_SYMBOL(a) {a, #a}
>
> // Generate the list using the following script:
> -// sed -n 's/^#define \(EC_CMD_[[:alnum:]_]*\)\s.*/\tTRACE_SYMBOL(\1), \\/p' include/linux/mfd/cros_ec_commands.h
> +// sed -n 's/^#define \(EC_CMD_[[:alnum:]_]*\)\s.*/\tTRACE_SYMBOL(\1), \\/p' include/linux/platform_data/cros_ec_commands.h
> #define EC_CMDS \
> TRACE_SYMBOL(EC_CMD_PROTO_VERSION), \
> TRACE_SYMBOL(EC_CMD_HELLO), \
> diff --git a/drivers/platform/chrome/cros_ec_trace.h b/drivers/platform/chrome/cros_ec_trace.h
> index 7ae3b89c78b9..0dd4df30fa89 100644
> --- a/drivers/platform/chrome/cros_ec_trace.h
> +++ b/drivers/platform/chrome/cros_ec_trace.h
> @@ -11,8 +11,10 @@
> #if !defined(_CROS_EC_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
> #define _CROS_EC_TRACE_H_
>
> +#include <linux/bits.h>
> #include <linux/types.h>
> -#include <linux/mfd/cros_ec.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> #include <linux/tracepoint.h>
>
> diff --git a/drivers/platform/chrome/cros_ec_vbc.c b/drivers/platform/chrome/cros_ec_vbc.c
> index 8392a1ec33a7..cffe119e7a7a 100644
> --- a/drivers/platform/chrome/cros_ec_vbc.c
> +++ b/drivers/platform/chrome/cros_ec_vbc.c
> @@ -7,8 +7,9 @@
> #include <linux/of.h>
> #include <linux/platform_device.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/slab.h>
>
> #define DRV_NAME "cros-ec-vbc"
> diff --git a/drivers/platform/chrome/cros_usbpd_logger.c b/drivers/platform/chrome/cros_usbpd_logger.c
> index 7c7b267626a0..c549a9b49b56 100644
> --- a/drivers/platform/chrome/cros_usbpd_logger.c
> +++ b/drivers/platform/chrome/cros_usbpd_logger.c
> @@ -6,10 +6,11 @@
> */
>
> #include <linux/ktime.h>
> -#include <linux/math64.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/math64.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/rtc.h>
>
> diff --git a/drivers/power/supply/cros_usbpd-charger.c b/drivers/power/supply/cros_usbpd-charger.c
> index 3a9ea94c3de3..6cc7c3910e09 100644
> --- a/drivers/power/supply/cros_usbpd-charger.c
> +++ b/drivers/power/supply/cros_usbpd-charger.c
> @@ -5,9 +5,10 @@
> * Copyright (c) 2014 - 2018 Google, Inc
> */
>
> -#include <linux/module.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/power_supply.h>
> #include <linux/slab.h>
> diff --git a/drivers/pwm/pwm-cros-ec.c b/drivers/pwm/pwm-cros-ec.c
> index 98f6ac6cf6ab..85bea2d40b7d 100644
> --- a/drivers/pwm/pwm-cros-ec.c
> +++ b/drivers/pwm/pwm-cros-ec.c
> @@ -6,8 +6,8 @@
> */
>
> #include <linux/module.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/pwm.h>
> #include <linux/slab.h>
> diff --git a/drivers/rtc/rtc-cros-ec.c b/drivers/rtc/rtc-cros-ec.c
> index 4d6bf9304ceb..6909e01936d9 100644
> --- a/drivers/rtc/rtc-cros-ec.c
> +++ b/drivers/rtc/rtc-cros-ec.c
> @@ -6,8 +6,9 @@
>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/rtc.h>
> #include <linux/slab.h>
> diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
> index ce16445411ac..8a91669f5bed 100644
> --- a/include/linux/iio/common/cros_ec_sensors_core.h
> +++ b/include/linux/iio/common/cros_ec_sensors_core.h
> @@ -18,7 +18,8 @@
>
> #include <linux/iio/iio.h>
> #include <linux/irqreturn.h>
> -#include <linux/mfd/cros_ec.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> enum {
> CROS_EC_SENSOR_X,
> diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
> index 2a1372d167b9..e0bae49535e1 100644
> --- a/include/linux/mfd/cros_ec.h
> +++ b/include/linux/mfd/cros_ec.h
> @@ -16,184 +16,7 @@
> #ifndef __LINUX_MFD_CROS_EC_H
> #define __LINUX_MFD_CROS_EC_H
>
> -#include <linux/cdev.h>
> #include <linux/device.h>
> -#include <linux/notifier.h>
> -#include <linux/mfd/cros_ec_commands.h>
> -#include <linux/mutex.h>
> -
> -#define CROS_EC_DEV_NAME "cros_ec"
> -#define CROS_EC_DEV_FP_NAME "cros_fp"
> -#define CROS_EC_DEV_PD_NAME "cros_pd"
> -#define CROS_EC_DEV_TP_NAME "cros_tp"
> -#define CROS_EC_DEV_ISH_NAME "cros_ish"
> -
> -/*
> - * The EC is unresponsive for a time after a reboot command. Add a
> - * simple delay to make sure that the bus stays locked.
> - */
> -#define EC_REBOOT_DELAY_MS 50
> -
> -/*
> - * Max bus-specific overhead incurred by request/responses.
> - * I2C requires 1 additional byte for requests.
> - * I2C requires 2 additional bytes for responses.
> - * SPI requires up to 32 additional bytes for responses.
> - */
> -#define EC_PROTO_VERSION_UNKNOWN 0
> -#define EC_MAX_REQUEST_OVERHEAD 1
> -#define EC_MAX_RESPONSE_OVERHEAD 32
> -
> -/*
> - * Command interface between EC and AP, for LPC, I2C and SPI interfaces.
> - */
> -enum {
> - EC_MSG_TX_HEADER_BYTES = 3,
> - EC_MSG_TX_TRAILER_BYTES = 1,
> - EC_MSG_TX_PROTO_BYTES = EC_MSG_TX_HEADER_BYTES +
> - EC_MSG_TX_TRAILER_BYTES,
> - EC_MSG_RX_PROTO_BYTES = 3,
> -
> - /* Max length of messages for proto 2*/
> - EC_PROTO2_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE +
> - EC_MSG_TX_PROTO_BYTES,
> -
> - EC_MAX_MSG_BYTES = 64 * 1024,
> -};
> -
> -/**
> - * struct cros_ec_command - Information about a ChromeOS EC command.
> - * @version: Command version number (often 0).
> - * @command: Command to send (EC_CMD_...).
> - * @outsize: Outgoing length in bytes.
> - * @insize: Max number of bytes to accept from the EC.
> - * @result: EC's response to the command (separate from communication failure).
> - * @data: Where to put the incoming data from EC and outgoing data to EC.
> - */
> -struct cros_ec_command {
> - uint32_t version;
> - uint32_t command;
> - uint32_t outsize;
> - uint32_t insize;
> - uint32_t result;
> - uint8_t data[0];
> -};
> -
> -/**
> - * struct cros_ec_device - Information about a ChromeOS EC device.
> - * @phys_name: Name of physical comms layer (e.g. 'i2c-4').
> - * @dev: Device pointer for physical comms device
> - * @was_wake_device: True if this device was set to wake the system from
> - * sleep at the last suspend.
> - * @cros_class: The class structure for this device.
> - * @cmd_readmem: Direct read of the EC memory-mapped region, if supported.
> - * @offset: Is within EC_LPC_ADDR_MEMMAP region.
> - * @bytes: Number of bytes to read. zero means "read a string" (including
> - * the trailing '\0'). At most only EC_MEMMAP_SIZE bytes can be
> - * read. Caller must ensure that the buffer is large enough for the
> - * result when reading a string.
> - * @max_request: Max size of message requested.
> - * @max_response: Max size of message response.
> - * @max_passthru: Max sice of passthru message.
> - * @proto_version: The protocol version used for this device.
> - * @priv: Private data.
> - * @irq: Interrupt to use.
> - * @id: Device id.
> - * @din: Input buffer (for data from EC). This buffer will always be
> - * dword-aligned and include enough space for up to 7 word-alignment
> - * bytes also, so we can ensure that the body of the message is always
> - * dword-aligned (64-bit). We use this alignment to keep ARM and x86
> - * happy. Probably word alignment would be OK, there might be a small
> - * performance advantage to using dword.
> - * @dout: Output buffer (for data to EC). This buffer will always be
> - * dword-aligned and include enough space for up to 7 word-alignment
> - * bytes also, so we can ensure that the body of the message is always
> - * dword-aligned (64-bit). We use this alignment to keep ARM and x86
> - * happy. Probably word alignment would be OK, there might be a small
> - * performance advantage to using dword.
> - * @din_size: Size of din buffer to allocate (zero to use static din).
> - * @dout_size: Size of dout buffer to allocate (zero to use static dout).
> - * @wake_enabled: True if this device can wake the system from sleep.
> - * @suspended: True if this device had been suspended.
> - * @cmd_xfer: Send command to EC and get response.
> - * Returns the number of bytes received if the communication
> - * succeeded, but that doesn't mean the EC was happy with the
> - * command. The caller should check msg.result for the EC's result
> - * code.
> - * @pkt_xfer: Send packet to EC and get response.
> - * @lock: One transaction at a time.
> - * @mkbp_event_supported: True if this EC supports the MKBP event protocol.
> - * @host_sleep_v1: True if this EC supports the sleep v1 command.
> - * @event_notifier: Interrupt event notifier for transport devices.
> - * @event_data: Raw payload transferred with the MKBP event.
> - * @event_size: Size in bytes of the event data.
> - * @host_event_wake_mask: Mask of host events that cause wake from suspend.
> - * @ec: The platform_device used by the mfd driver to interface with the
> - * main EC.
> - * @pd: The platform_device used by the mfd driver to interface with the
> - * PD behind an EC.
> - */
> -struct cros_ec_device {
> - /* These are used by other drivers that want to talk to the EC */
> - const char *phys_name;
> - struct device *dev;
> - bool was_wake_device;
> - struct class *cros_class;
> - int (*cmd_readmem)(struct cros_ec_device *ec, unsigned int offset,
> - unsigned int bytes, void *dest);
> -
> - /* These are used to implement the platform-specific interface */
> - u16 max_request;
> - u16 max_response;
> - u16 max_passthru;
> - u16 proto_version;
> - void *priv;
> - int irq;
> - u8 *din;
> - u8 *dout;
> - int din_size;
> - int dout_size;
> - bool wake_enabled;
> - bool suspended;
> - int (*cmd_xfer)(struct cros_ec_device *ec,
> - struct cros_ec_command *msg);
> - int (*pkt_xfer)(struct cros_ec_device *ec,
> - struct cros_ec_command *msg);
> - struct mutex lock;
> - bool mkbp_event_supported;
> - bool host_sleep_v1;
> - struct blocking_notifier_head event_notifier;
> -
> - struct ec_response_get_next_event_v1 event_data;
> - int event_size;
> - u32 host_event_wake_mask;
> -
> - /* The platform devices used by the mfd driver */
> - struct platform_device *ec;
> - struct platform_device *pd;
> -};
> -
> -/**
> - * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information.
> - * @sensor_num: Id of the sensor, as reported by the EC.
> - */
> -struct cros_ec_sensor_platform {
> - u8 sensor_num;
> -};
> -
> -/**
> - * struct cros_ec_platform - ChromeOS EC platform information.
> - * @ec_name: Name of EC device (e.g. 'cros-ec', 'cros-pd', ...)
> - * used in /dev/ and sysfs.
> - * @cmd_offset: Offset to apply for each command. Set when
> - * registering a device behind another one.
> - */
> -struct cros_ec_platform {
> - const char *ec_name;
> - u16 cmd_offset;
> -};
> -
> -struct cros_ec_debugfs;
>
> /**
> * struct cros_ec_dev - ChromeOS EC device entry point.
> @@ -217,133 +40,4 @@ struct cros_ec_dev {
>
> #define to_cros_ec_dev(dev) container_of(dev, struct cros_ec_dev, class_dev)
>
> -/**
> - * cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device.
> - * @ec_dev: Device to suspend.
> - *
> - * This can be called by drivers to handle a suspend event.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_suspend(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_resume() - Handle a resume operation for the ChromeOS EC device.
> - * @ec_dev: Device to resume.
> - *
> - * This can be called by drivers to handle a resume event.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_resume(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer.
> - * @ec_dev: Device to register.
> - * @msg: Message to write.
> - *
> - * This is intended to be used by all ChromeOS EC drivers, but at present
> - * only SPI uses it. Once LPC uses the same protocol it can start using it.
> - * I2C could use it now, with a refactor of the existing code.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
> - struct cros_ec_command *msg);
> -
> -/**
> - * cros_ec_check_result() - Check ec_msg->result.
> - * @ec_dev: EC device.
> - * @msg: Message to check.
> - *
> - * This is used by ChromeOS EC drivers to check the ec_msg->result for
> - * errors and to warn about them.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_check_result(struct cros_ec_device *ec_dev,
> - struct cros_ec_command *msg);
> -
> -/**
> - * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC.
> - * @ec_dev: EC device.
> - * @msg: Message to write.
> - *
> - * Call this to send a command to the ChromeOS EC. This should be used
> - * instead of calling the EC's cmd_xfer() callback directly.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
> - struct cros_ec_command *msg);
> -
> -/**
> - * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC.
> - * @ec_dev: EC device.
> - * @msg: Message to write.
> - *
> - * This function is identical to cros_ec_cmd_xfer, except it returns success
> - * status only if both the command was transmitted successfully and the EC
> - * replied with success status. It's not necessary to check msg->result when
> - * using this function.
> - *
> - * Return: The number of bytes transferred on success or negative error code.
> - */
> -int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
> - struct cros_ec_command *msg);
> -
> -/**
> - * cros_ec_register() - Register a new ChromeOS EC, using the provided info.
> - * @ec_dev: Device to register.
> - *
> - * Before calling this, allocate a pointer to a new device and then fill
> - * in all the fields up to the --private-- marker.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_register(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_unregister() - Remove a ChromeOS EC.
> - * @ec_dev: Device to unregister.
> - *
> - * Call this to deregister a ChromeOS EC, then clean up any private data.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_unregister(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_query_all() - Query the protocol version supported by the
> - * ChromeOS EC.
> - * @ec_dev: Device to register.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_query_all(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC.
> - * @ec_dev: Device to fetch event from.
> - * @wake_event: Pointer to a bool set to true upon return if the event might be
> - * treated as a wake event. Ignored if null.
> - *
> - * Return: negative error code on errors; 0 for no data; or else number of
> - * bytes received (i.e., an event was retrieved successfully). Event types are
> - * written out to @ec_dev->event_data.event_type on success.
> - */
> -int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event);
> -
> -/**
> - * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC.
> - * @ec_dev: Device to fetch event from.
> - *
> - * When MKBP is supported, when the EC raises an interrupt, we collect the
> - * events raised and call the functions in the ec notifier. This function
> - * is a helper to know which events are raised.
> - *
> - * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*.
> - */
> -u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev);
> -
> #endif /* __LINUX_MFD_CROS_EC_H */
> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
> similarity index 100%
> rename from include/linux/mfd/cros_ec_commands.h
> rename to include/linux/platform_data/cros_ec_commands.h
> diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h
> new file mode 100644
> index 000000000000..34dd9e5c1779
> --- /dev/null
> +++ b/include/linux/platform_data/cros_ec_proto.h
> @@ -0,0 +1,315 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * ChromeOS Embedded Controller protocol interface.
> + *
> + * Copyright (C) 2012 Google, Inc
> + */
> +
> +#ifndef __LINUX_CROS_EC_PROTO_H
> +#define __LINUX_CROS_EC_PROTO_H
> +
> +#include <linux/device.h>
> +#include <linux/mutex.h>
> +#include <linux/notifier.h>
> +
> +#define CROS_EC_DEV_NAME "cros_ec"
> +#define CROS_EC_DEV_FP_NAME "cros_fp"
> +#define CROS_EC_DEV_ISH_NAME "cros_ish"
> +#define CROS_EC_DEV_PD_NAME "cros_pd"
> +#define CROS_EC_DEV_TP_NAME "cros_tp"
> +
> +/*
> + * The EC is unresponsive for a time after a reboot command. Add a
> + * simple delay to make sure that the bus stays locked.
> + */
> +#define EC_REBOOT_DELAY_MS 50
> +
> +/*
> + * Max bus-specific overhead incurred by request/responses.
> + * I2C requires 1 additional byte for requests.
> + * I2C requires 2 additional bytes for responses.
> + * SPI requires up to 32 additional bytes for responses.
> + */
> +#define EC_PROTO_VERSION_UNKNOWN 0
> +#define EC_MAX_REQUEST_OVERHEAD 1
> +#define EC_MAX_RESPONSE_OVERHEAD 32
> +
> +/*
> + * Command interface between EC and AP, for LPC, I2C and SPI interfaces.
> + */
> +enum {
> + EC_MSG_TX_HEADER_BYTES = 3,
> + EC_MSG_TX_TRAILER_BYTES = 1,
> + EC_MSG_TX_PROTO_BYTES = EC_MSG_TX_HEADER_BYTES +
> + EC_MSG_TX_TRAILER_BYTES,
> + EC_MSG_RX_PROTO_BYTES = 3,
> +
> + /* Max length of messages for proto 2*/
> + EC_PROTO2_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE +
> + EC_MSG_TX_PROTO_BYTES,
> +
> + EC_MAX_MSG_BYTES = 64 * 1024,
> +};
> +
> +/**
> + * struct cros_ec_command - Information about a ChromeOS EC command.
> + * @version: Command version number (often 0).
> + * @command: Command to send (EC_CMD_...).
> + * @outsize: Outgoing length in bytes.
> + * @insize: Max number of bytes to accept from the EC.
> + * @result: EC's response to the command (separate from communication failure).
> + * @data: Where to put the incoming data from EC and outgoing data to EC.
> + */
> +struct cros_ec_command {
> + uint32_t version;
> + uint32_t command;
> + uint32_t outsize;
> + uint32_t insize;
> + uint32_t result;
> + uint8_t data[0];
> +};
> +
> +/**
> + * struct cros_ec_device - Information about a ChromeOS EC device.
> + * @phys_name: Name of physical comms layer (e.g. 'i2c-4').
> + * @dev: Device pointer for physical comms device
> + * @was_wake_device: True if this device was set to wake the system from
> + * sleep at the last suspend.
> + * @cros_class: The class structure for this device.
> + * @cmd_readmem: Direct read of the EC memory-mapped region, if supported.
> + * @offset: Is within EC_LPC_ADDR_MEMMAP region.
> + * @bytes: Number of bytes to read. zero means "read a string" (including
> + * the trailing '\0'). At most only EC_MEMMAP_SIZE bytes can be
> + * read. Caller must ensure that the buffer is large enough for the
> + * result when reading a string.
> + * @max_request: Max size of message requested.
> + * @max_response: Max size of message response.
> + * @max_passthru: Max sice of passthru message.
> + * @proto_version: The protocol version used for this device.
> + * @priv: Private data.
> + * @irq: Interrupt to use.
> + * @id: Device id.
> + * @din: Input buffer (for data from EC). This buffer will always be
> + * dword-aligned and include enough space for up to 7 word-alignment
> + * bytes also, so we can ensure that the body of the message is always
> + * dword-aligned (64-bit). We use this alignment to keep ARM and x86
> + * happy. Probably word alignment would be OK, there might be a small
> + * performance advantage to using dword.
> + * @dout: Output buffer (for data to EC). This buffer will always be
> + * dword-aligned and include enough space for up to 7 word-alignment
> + * bytes also, so we can ensure that the body of the message is always
> + * dword-aligned (64-bit). We use this alignment to keep ARM and x86
> + * happy. Probably word alignment would be OK, there might be a small
> + * performance advantage to using dword.
> + * @din_size: Size of din buffer to allocate (zero to use static din).
> + * @dout_size: Size of dout buffer to allocate (zero to use static dout).
> + * @wake_enabled: True if this device can wake the system from sleep.
> + * @suspended: True if this device had been suspended.
> + * @cmd_xfer: Send command to EC and get response.
> + * Returns the number of bytes received if the communication
> + * succeeded, but that doesn't mean the EC was happy with the
> + * command. The caller should check msg.result for the EC's result
> + * code.
> + * @pkt_xfer: Send packet to EC and get response.
> + * @lock: One transaction at a time.
> + * @mkbp_event_supported: True if this EC supports the MKBP event protocol.
> + * @host_sleep_v1: True if this EC supports the sleep v1 command.
> + * @event_notifier: Interrupt event notifier for transport devices.
> + * @event_data: Raw payload transferred with the MKBP event.
> + * @event_size: Size in bytes of the event data.
> + * @host_event_wake_mask: Mask of host events that cause wake from suspend.
> + * @ec: The platform_device used by the mfd driver to interface with the
> + * main EC.
> + * @pd: The platform_device used by the mfd driver to interface with the
> + * PD behind an EC.
> + */
> +struct cros_ec_device {
> + /* These are used by other drivers that want to talk to the EC */
> + const char *phys_name;
> + struct device *dev;
> + bool was_wake_device;
> + struct class *cros_class;
> + int (*cmd_readmem)(struct cros_ec_device *ec, unsigned int offset,
> + unsigned int bytes, void *dest);
> +
> + /* These are used to implement the platform-specific interface */
> + u16 max_request;
> + u16 max_response;
> + u16 max_passthru;
> + u16 proto_version;
> + void *priv;
> + int irq;
> + u8 *din;
> + u8 *dout;
> + int din_size;
> + int dout_size;
> + bool wake_enabled;
> + bool suspended;
> + int (*cmd_xfer)(struct cros_ec_device *ec,
> + struct cros_ec_command *msg);
> + int (*pkt_xfer)(struct cros_ec_device *ec,
> + struct cros_ec_command *msg);
> + struct mutex lock;
> + bool mkbp_event_supported;
> + bool host_sleep_v1;
> + struct blocking_notifier_head event_notifier;
> +
> + struct ec_response_get_next_event_v1 event_data;
> + int event_size;
> + u32 host_event_wake_mask;
> +
> + /* The platform devices used by the mfd driver */
> + struct platform_device *ec;
> + struct platform_device *pd;
> +};
> +
> +/**
> + * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information.
> + * @sensor_num: Id of the sensor, as reported by the EC.
> + */
> +struct cros_ec_sensor_platform {
> + u8 sensor_num;
> +};
> +
> +/**
> + * struct cros_ec_platform - ChromeOS EC platform information.
> + * @ec_name: Name of EC device (e.g. 'cros-ec', 'cros-pd', ...)
> + * used in /dev/ and sysfs.
> + * @cmd_offset: Offset to apply for each command. Set when
> + * registering a device behind another one.
> + */
> +struct cros_ec_platform {
> + const char *ec_name;
> + u16 cmd_offset;
> +};
> +
> +/**
> + * cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device.
> + * @ec_dev: Device to suspend.
> + *
> + * This can be called by drivers to handle a suspend event.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_suspend(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_resume() - Handle a resume operation for the ChromeOS EC device.
> + * @ec_dev: Device to resume.
> + *
> + * This can be called by drivers to handle a resume event.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_resume(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer.
> + * @ec_dev: Device to register.
> + * @msg: Message to write.
> + *
> + * This is intended to be used by all ChromeOS EC drivers, but at present
> + * only SPI uses it. Once LPC uses the same protocol it can start using it.
> + * I2C could use it now, with a refactor of the existing code.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> + * cros_ec_check_result() - Check ec_msg->result.
> + * @ec_dev: EC device.
> + * @msg: Message to check.
> + *
> + * This is used by ChromeOS EC drivers to check the ec_msg->result for
> + * errors and to warn about them.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_check_result(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> + * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC.
> + * @ec_dev: EC device.
> + * @msg: Message to write.
> + *
> + * Call this to send a command to the ChromeOS EC. This should be used
> + * instead of calling the EC's cmd_xfer() callback directly.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> + * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC.
> + * @ec_dev: EC device.
> + * @msg: Message to write.
> + *
> + * This function is identical to cros_ec_cmd_xfer, except it returns success
> + * status only if both the command was transmitted successfully and the EC
> + * replied with success status. It's not necessary to check msg->result when
> + * using this function.
> + *
> + * Return: The number of bytes transferred on success or negative error code.
> + */
> +int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> + * cros_ec_register() - Register a new ChromeOS EC, using the provided info.
> + * @ec_dev: Device to register.
> + *
> + * Before calling this, allocate a pointer to a new device and then fill
> + * in all the fields up to the --private-- marker.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_register(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_unregister() - Remove a ChromeOS EC.
> + * @ec_dev: Device to unregister.
> + *
> + * Call this to deregister a ChromeOS EC, then clean up any private data.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_unregister(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_query_all() - Query the protocol version supported by the
> + * ChromeOS EC.
> + * @ec_dev: Device to register.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_query_all(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC.
> + * @ec_dev: Device to fetch event from.
> + * @wake_event: Pointer to a bool set to true upon return if the event might be
> + * treated as a wake event. Ignored if null.
> + *
> + * Return: negative error code on errors; 0 for no data; or else number of
> + * bytes received (i.e., an event was retrieved successfully). Event types are
> + * written out to @ec_dev->event_data.event_type on success.
> + */
> +int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event);
> +
> +/**
> + * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC.
> + * @ec_dev: Device to fetch event from.
> + *
> + * When MKBP is supported, when the EC raises an interrupt, we collect the
> + * events raised and call the functions in the ec notifier. This function
> + * is a helper to know which events are raised.
> + *
> + * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*.
> + */
> +u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev);
> +
> +#endif /* __LINUX_CROS_EC_PROTO_H */
> diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
> index 87830ed5ebf4..79bb4081d3c2 100644
> --- a/sound/soc/codecs/cros_ec_codec.c
> +++ b/sound/soc/codecs/cros_ec_codec.c
> @@ -9,9 +9,9 @@
> #include <linux/delay.h>
> #include <linux/device.h>
> #include <linux/kernel.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <sound/pcm.h>
> #include <sound/pcm_params.h>
> --
> 2.20.1
>
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
On Tue, 4 Jun 2019 17:20:15 +0200
Enric Balletbo i Serra <[email protected]> wrote:
> There is a bit of mess between cros-ec mfd includes and platform
> includes. For example, we have a linux/mfd/cros_ec.h include that
> exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
> we have a linux/mfd/cros_ec_commands.h file that is non related to the
> multifunction device (in the sense that is not exporting any function of
> the mfd device). This causes crossed includes between mfd and
> platform/chrome subsystems and makes the code difficult to read, apart
> from creating 'curious' situations where a platform/chrome driver includes
> a linux/mfd/cros_ec.h file just to get the exported functions that are
> implemented in another platform/chrome driver.
>
> In order to have a better separation on what the cros-ec multifunction
> driver does and what the cros-ec core provides move and rework the
> affected includes doing:
>
> - Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
> - Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
> driver from include/linux/mfd/cros_ec.h to a new file
> include/linux/platform_data/cros_ec_proto.h
> - Update all the drivers with the new includes, so
> - Drivers that only need to know about the protocol include
> - linux/platform_data/cros_ec_proto.h
> - linux/platform_data/cros_ec_commands.h
> - Drivers that need to know about the cros-ec mfd device also include
> - linux/mfd/cros_ec.h
>
> Signed-off-by: Enric Balletbo i Serra <[email protected]>
Acked-by: Jonathan Cameron <[email protected]> # for iio parts
> ---
>
> drivers/extcon/extcon-usbc-cros-ec.c | 3 +-
> drivers/hid/hid-google-hammer.c | 4 +-
> drivers/i2c/busses/i2c-cros-ec-tunnel.c | 4 +-
> drivers/iio/accel/cros_ec_accel_legacy.c | 3 +-
> .../common/cros_ec_sensors/cros_ec_sensors.c | 3 +-
> .../cros_ec_sensors/cros_ec_sensors_core.c | 3 +-
> drivers/iio/light/cros_ec_light_prox.c | 3 +-
> drivers/iio/pressure/cros_ec_baro.c | 3 +-
> drivers/input/keyboard/cros_ec_keyb.c | 4 +-
> .../media/platform/cros-ec-cec/cros-ec-cec.c | 4 +-
> drivers/mfd/cros_ec_dev.c | 3 +-
> drivers/platform/chrome/cros_ec.c | 3 +-
> drivers/platform/chrome/cros_ec_chardev.c | 4 +-
> drivers/platform/chrome/cros_ec_debugfs.c | 3 +-
> drivers/platform/chrome/cros_ec_i2c.c | 4 +-
> drivers/platform/chrome/cros_ec_lightbar.c | 3 +-
> drivers/platform/chrome/cros_ec_lpc.c | 4 +-
> drivers/platform/chrome/cros_ec_lpc_reg.c | 4 +-
> drivers/platform/chrome/cros_ec_proto.c | 3 +-
> drivers/platform/chrome/cros_ec_rpmsg.c | 4 +-
> drivers/platform/chrome/cros_ec_spi.c | 4 +-
> drivers/platform/chrome/cros_ec_sysfs.c | 3 +-
> drivers/platform/chrome/cros_ec_trace.c | 2 +-
> drivers/platform/chrome/cros_ec_trace.h | 4 +-
> drivers/platform/chrome/cros_ec_vbc.c | 3 +-
> drivers/platform/chrome/cros_usbpd_logger.c | 5 +-
> drivers/power/supply/cros_usbpd-charger.c | 5 +-
> drivers/pwm/pwm-cros-ec.c | 4 +-
> drivers/rtc/rtc-cros-ec.c | 3 +-
> .../linux/iio/common/cros_ec_sensors_core.h | 3 +-
> include/linux/mfd/cros_ec.h | 306 -----------------
> .../{mfd => platform_data}/cros_ec_commands.h | 0
> include/linux/platform_data/cros_ec_proto.h | 315 ++++++++++++++++++
> sound/soc/codecs/cros_ec_codec.c | 4 +-
> 34 files changed, 379 insertions(+), 351 deletions(-)
> rename include/linux/{mfd => platform_data}/cros_ec_commands.h (100%)
> create mode 100644 include/linux/platform_data/cros_ec_proto.h
>
> diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c
> index 43c0a936ab82..5290cc2d19d9 100644
> --- a/drivers/extcon/extcon-usbc-cros-ec.c
> +++ b/drivers/extcon/extcon-usbc-cros-ec.c
> @@ -6,10 +6,11 @@
>
> #include <linux/extcon-provider.h>
> #include <linux/kernel.h>
> -#include <linux/mfd/cros_ec.h>
> #include <linux/module.h>
> #include <linux/notifier.h>
> #include <linux/of.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/sched.h>
> diff --git a/drivers/hid/hid-google-hammer.c b/drivers/hid/hid-google-hammer.c
> index ee5e0bdcf078..84f8c127ebdc 100644
> --- a/drivers/hid/hid-google-hammer.c
> +++ b/drivers/hid/hid-google-hammer.c
> @@ -16,9 +16,9 @@
> #include <linux/acpi.h>
> #include <linux/hid.h>
> #include <linux/leds.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/pm_wakeup.h>
> #include <asm/unaligned.h>
> diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> index 82bcd9a78759..c551aa96a2e3 100644
> --- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> @@ -5,8 +5,8 @@
>
> #include <linux/module.h>
> #include <linux/i2c.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c
> index 46bb2e421bb9..fd9a634f741e 100644
> --- a/drivers/iio/accel/cros_ec_accel_legacy.c
> +++ b/drivers/iio/accel/cros_ec_accel_legacy.c
> @@ -18,9 +18,10 @@
> #include <linux/iio/triggered_buffer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/slab.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
>
> #define DRV_NAME "cros-ec-accel-legacy"
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> index 17af4e0fd5f8..40dc24ff0ee5 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> @@ -17,8 +17,9 @@
> #include <linux/iio/triggered_buffer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> index 719a0df5aeeb..fd63315399ac 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> @@ -14,9 +14,10 @@
> #include <linux/iio/trigger_consumer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/slab.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
>
> static char *cros_ec_loc[] = {
> diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
> index 308ee6ff2e22..437e0eae9178 100644
> --- a/drivers/iio/light/cros_ec_light_prox.c
> +++ b/drivers/iio/light/cros_ec_light_prox.c
> @@ -15,8 +15,9 @@
> #include <linux/iio/trigger_consumer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c
> index 034ce98d6e97..956dc01f1295 100644
> --- a/drivers/iio/pressure/cros_ec_baro.c
> +++ b/drivers/iio/pressure/cros_ec_baro.c
> @@ -15,9 +15,10 @@
> #include <linux/iio/trigger_consumer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/slab.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
>
> /*
> diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
> index d56001181598..2b71c5a51f90 100644
> --- a/drivers/input/keyboard/cros_ec_keyb.c
> +++ b/drivers/input/keyboard/cros_ec_keyb.c
> @@ -22,8 +22,8 @@
> #include <linux/slab.h>
> #include <linux/sysrq.h>
> #include <linux/input/matrix_keypad.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> #include <asm/unaligned.h>
>
> diff --git a/drivers/media/platform/cros-ec-cec/cros-ec-cec.c b/drivers/media/platform/cros-ec-cec/cros-ec-cec.c
> index 068df9888dbf..2e4e263a4a94 100644
> --- a/drivers/media/platform/cros-ec-cec/cros-ec-cec.c
> +++ b/drivers/media/platform/cros-ec-cec/cros-ec-cec.c
> @@ -16,8 +16,8 @@
> #include <linux/interrupt.h>
> #include <media/cec.h>
> #include <media/cec-notifier.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> #define DRV_NAME "cros-ec-cec"
>
> diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
> index c7a5dfa36874..5481df4e1216 100644
> --- a/drivers/mfd/cros_ec_dev.c
> +++ b/drivers/mfd/cros_ec_dev.c
> @@ -7,11 +7,12 @@
>
> #include <linux/mfd/core.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/mod_devicetable.h>
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/slab.h>
>
> #define DRV_NAME "cros-ec-dev"
> diff --git a/drivers/platform/chrome/cros_ec.c b/drivers/platform/chrome/cros_ec.c
> index 11fced7917fc..9800597ccd96 100644
> --- a/drivers/platform/chrome/cros_ec.c
> +++ b/drivers/platform/chrome/cros_ec.c
> @@ -21,7 +21,8 @@
> #include <linux/interrupt.h>
> #include <linux/slab.h>
> #include <linux/module.h>
> -#include <linux/mfd/cros_ec.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/suspend.h>
> #include <asm/unaligned.h>
>
> diff --git a/drivers/platform/chrome/cros_ec_chardev.c b/drivers/platform/chrome/cros_ec_chardev.c
> index 1a0a27080026..786b941a60df 100644
> --- a/drivers/platform/chrome/cros_ec_chardev.c
> +++ b/drivers/platform/chrome/cros_ec_chardev.c
> @@ -9,10 +9,10 @@
> #include <linux/device.h>
> #include <linux/fs.h>
> #include <linux/list.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/miscdevice.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/spinlock.h>
> diff --git a/drivers/platform/chrome/cros_ec_debugfs.c b/drivers/platform/chrome/cros_ec_debugfs.c
> index 4c2a27f6a6d0..b088d91be9c9 100644
> --- a/drivers/platform/chrome/cros_ec_debugfs.c
> +++ b/drivers/platform/chrome/cros_ec_debugfs.c
> @@ -8,9 +8,10 @@
> #include <linux/delay.h>
> #include <linux/fs.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/mutex.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/poll.h>
> #include <linux/sched.h>
> diff --git a/drivers/platform/chrome/cros_ec_i2c.c b/drivers/platform/chrome/cros_ec_i2c.c
> index 6bb82dfa7dae..9bd97bc8454b 100644
> --- a/drivers/platform/chrome/cros_ec_i2c.c
> +++ b/drivers/platform/chrome/cros_ec_i2c.c
> @@ -9,8 +9,8 @@
> #include <linux/module.h>
> #include <linux/i2c.h>
> #include <linux/interrupt.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> diff --git a/drivers/platform/chrome/cros_ec_lightbar.c b/drivers/platform/chrome/cros_ec_lightbar.c
> index d30a6650b0b5..caa26da2c788 100644
> --- a/drivers/platform/chrome/cros_ec_lightbar.c
> +++ b/drivers/platform/chrome/cros_ec_lightbar.c
> @@ -9,8 +9,9 @@
> #include <linux/fs.h>
> #include <linux/kobject.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/sched.h>
> #include <linux/types.h>
> diff --git a/drivers/platform/chrome/cros_ec_lpc.c b/drivers/platform/chrome/cros_ec_lpc.c
> index 2c7e654cf89c..0c976e95998a 100644
> --- a/drivers/platform/chrome/cros_ec_lpc.c
> +++ b/drivers/platform/chrome/cros_ec_lpc.c
> @@ -16,9 +16,9 @@
> #include <linux/delay.h>
> #include <linux/io.h>
> #include <linux/interrupt.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/printk.h>
> #include <linux/suspend.h>
> diff --git a/drivers/platform/chrome/cros_ec_lpc_reg.c b/drivers/platform/chrome/cros_ec_lpc_reg.c
> index 0f5cd0ac8b49..dec9a779e209 100644
> --- a/drivers/platform/chrome/cros_ec_lpc_reg.c
> +++ b/drivers/platform/chrome/cros_ec_lpc_reg.c
> @@ -4,8 +4,8 @@
> // Copyright (C) 2016 Google, Inc
>
> #include <linux/io.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> #include "cros_ec_lpc_mec.h"
>
> diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
> index 3d2325197a68..f659f96bda12 100644
> --- a/drivers/platform/chrome/cros_ec_proto.c
> +++ b/drivers/platform/chrome/cros_ec_proto.c
> @@ -3,10 +3,11 @@
> //
> // Copyright (C) 2015 Google, Inc
>
> -#include <linux/mfd/cros_ec.h>
> #include <linux/delay.h>
> #include <linux/device.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/slab.h>
> #include <asm/unaligned.h>
>
> diff --git a/drivers/platform/chrome/cros_ec_rpmsg.c b/drivers/platform/chrome/cros_ec_rpmsg.c
> index 520e507bfa54..9633e5417686 100644
> --- a/drivers/platform/chrome/cros_ec_rpmsg.c
> +++ b/drivers/platform/chrome/cros_ec_rpmsg.c
> @@ -6,9 +6,9 @@
> #include <linux/delay.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/of.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/rpmsg.h>
> #include <linux/slab.h>
> diff --git a/drivers/platform/chrome/cros_ec_spi.c b/drivers/platform/chrome/cros_ec_spi.c
> index 2e21f2776063..9006e1872942 100644
> --- a/drivers/platform/chrome/cros_ec_spi.c
> +++ b/drivers/platform/chrome/cros_ec_spi.c
> @@ -6,9 +6,9 @@
> #include <linux/delay.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/of.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/spi/spi.h>
> diff --git a/drivers/platform/chrome/cros_ec_sysfs.c b/drivers/platform/chrome/cros_ec_sysfs.c
> index fe0b7614ae1b..0caeb8d0989d 100644
> --- a/drivers/platform/chrome/cros_ec_sysfs.c
> +++ b/drivers/platform/chrome/cros_ec_sysfs.c
> @@ -9,8 +9,9 @@
> #include <linux/fs.h>
> #include <linux/kobject.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/printk.h>
> #include <linux/slab.h>
> diff --git a/drivers/platform/chrome/cros_ec_trace.c b/drivers/platform/chrome/cros_ec_trace.c
> index 0a76412095a9..6f80ff4532ae 100644
> --- a/drivers/platform/chrome/cros_ec_trace.c
> +++ b/drivers/platform/chrome/cros_ec_trace.c
> @@ -6,7 +6,7 @@
> #define TRACE_SYMBOL(a) {a, #a}
>
> // Generate the list using the following script:
> -// sed -n 's/^#define \(EC_CMD_[[:alnum:]_]*\)\s.*/\tTRACE_SYMBOL(\1), \\/p' include/linux/mfd/cros_ec_commands.h
> +// sed -n 's/^#define \(EC_CMD_[[:alnum:]_]*\)\s.*/\tTRACE_SYMBOL(\1), \\/p' include/linux/platform_data/cros_ec_commands.h
> #define EC_CMDS \
> TRACE_SYMBOL(EC_CMD_PROTO_VERSION), \
> TRACE_SYMBOL(EC_CMD_HELLO), \
> diff --git a/drivers/platform/chrome/cros_ec_trace.h b/drivers/platform/chrome/cros_ec_trace.h
> index 7ae3b89c78b9..0dd4df30fa89 100644
> --- a/drivers/platform/chrome/cros_ec_trace.h
> +++ b/drivers/platform/chrome/cros_ec_trace.h
> @@ -11,8 +11,10 @@
> #if !defined(_CROS_EC_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
> #define _CROS_EC_TRACE_H_
>
> +#include <linux/bits.h>
> #include <linux/types.h>
> -#include <linux/mfd/cros_ec.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> #include <linux/tracepoint.h>
>
> diff --git a/drivers/platform/chrome/cros_ec_vbc.c b/drivers/platform/chrome/cros_ec_vbc.c
> index 8392a1ec33a7..cffe119e7a7a 100644
> --- a/drivers/platform/chrome/cros_ec_vbc.c
> +++ b/drivers/platform/chrome/cros_ec_vbc.c
> @@ -7,8 +7,9 @@
> #include <linux/of.h>
> #include <linux/platform_device.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/slab.h>
>
> #define DRV_NAME "cros-ec-vbc"
> diff --git a/drivers/platform/chrome/cros_usbpd_logger.c b/drivers/platform/chrome/cros_usbpd_logger.c
> index 7c7b267626a0..c549a9b49b56 100644
> --- a/drivers/platform/chrome/cros_usbpd_logger.c
> +++ b/drivers/platform/chrome/cros_usbpd_logger.c
> @@ -6,10 +6,11 @@
> */
>
> #include <linux/ktime.h>
> -#include <linux/math64.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/math64.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/rtc.h>
>
> diff --git a/drivers/power/supply/cros_usbpd-charger.c b/drivers/power/supply/cros_usbpd-charger.c
> index 3a9ea94c3de3..6cc7c3910e09 100644
> --- a/drivers/power/supply/cros_usbpd-charger.c
> +++ b/drivers/power/supply/cros_usbpd-charger.c
> @@ -5,9 +5,10 @@
> * Copyright (c) 2014 - 2018 Google, Inc
> */
>
> -#include <linux/module.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/power_supply.h>
> #include <linux/slab.h>
> diff --git a/drivers/pwm/pwm-cros-ec.c b/drivers/pwm/pwm-cros-ec.c
> index 98f6ac6cf6ab..85bea2d40b7d 100644
> --- a/drivers/pwm/pwm-cros-ec.c
> +++ b/drivers/pwm/pwm-cros-ec.c
> @@ -6,8 +6,8 @@
> */
>
> #include <linux/module.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/pwm.h>
> #include <linux/slab.h>
> diff --git a/drivers/rtc/rtc-cros-ec.c b/drivers/rtc/rtc-cros-ec.c
> index 4d6bf9304ceb..6909e01936d9 100644
> --- a/drivers/rtc/rtc-cros-ec.c
> +++ b/drivers/rtc/rtc-cros-ec.c
> @@ -6,8 +6,9 @@
>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/rtc.h>
> #include <linux/slab.h>
> diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
> index ce16445411ac..8a91669f5bed 100644
> --- a/include/linux/iio/common/cros_ec_sensors_core.h
> +++ b/include/linux/iio/common/cros_ec_sensors_core.h
> @@ -18,7 +18,8 @@
>
> #include <linux/iio/iio.h>
> #include <linux/irqreturn.h>
> -#include <linux/mfd/cros_ec.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> enum {
> CROS_EC_SENSOR_X,
> diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
> index 2a1372d167b9..e0bae49535e1 100644
> --- a/include/linux/mfd/cros_ec.h
> +++ b/include/linux/mfd/cros_ec.h
> @@ -16,184 +16,7 @@
> #ifndef __LINUX_MFD_CROS_EC_H
> #define __LINUX_MFD_CROS_EC_H
>
> -#include <linux/cdev.h>
> #include <linux/device.h>
> -#include <linux/notifier.h>
> -#include <linux/mfd/cros_ec_commands.h>
> -#include <linux/mutex.h>
> -
> -#define CROS_EC_DEV_NAME "cros_ec"
> -#define CROS_EC_DEV_FP_NAME "cros_fp"
> -#define CROS_EC_DEV_PD_NAME "cros_pd"
> -#define CROS_EC_DEV_TP_NAME "cros_tp"
> -#define CROS_EC_DEV_ISH_NAME "cros_ish"
> -
> -/*
> - * The EC is unresponsive for a time after a reboot command. Add a
> - * simple delay to make sure that the bus stays locked.
> - */
> -#define EC_REBOOT_DELAY_MS 50
> -
> -/*
> - * Max bus-specific overhead incurred by request/responses.
> - * I2C requires 1 additional byte for requests.
> - * I2C requires 2 additional bytes for responses.
> - * SPI requires up to 32 additional bytes for responses.
> - */
> -#define EC_PROTO_VERSION_UNKNOWN 0
> -#define EC_MAX_REQUEST_OVERHEAD 1
> -#define EC_MAX_RESPONSE_OVERHEAD 32
> -
> -/*
> - * Command interface between EC and AP, for LPC, I2C and SPI interfaces.
> - */
> -enum {
> - EC_MSG_TX_HEADER_BYTES = 3,
> - EC_MSG_TX_TRAILER_BYTES = 1,
> - EC_MSG_TX_PROTO_BYTES = EC_MSG_TX_HEADER_BYTES +
> - EC_MSG_TX_TRAILER_BYTES,
> - EC_MSG_RX_PROTO_BYTES = 3,
> -
> - /* Max length of messages for proto 2*/
> - EC_PROTO2_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE +
> - EC_MSG_TX_PROTO_BYTES,
> -
> - EC_MAX_MSG_BYTES = 64 * 1024,
> -};
> -
> -/**
> - * struct cros_ec_command - Information about a ChromeOS EC command.
> - * @version: Command version number (often 0).
> - * @command: Command to send (EC_CMD_...).
> - * @outsize: Outgoing length in bytes.
> - * @insize: Max number of bytes to accept from the EC.
> - * @result: EC's response to the command (separate from communication failure).
> - * @data: Where to put the incoming data from EC and outgoing data to EC.
> - */
> -struct cros_ec_command {
> - uint32_t version;
> - uint32_t command;
> - uint32_t outsize;
> - uint32_t insize;
> - uint32_t result;
> - uint8_t data[0];
> -};
> -
> -/**
> - * struct cros_ec_device - Information about a ChromeOS EC device.
> - * @phys_name: Name of physical comms layer (e.g. 'i2c-4').
> - * @dev: Device pointer for physical comms device
> - * @was_wake_device: True if this device was set to wake the system from
> - * sleep at the last suspend.
> - * @cros_class: The class structure for this device.
> - * @cmd_readmem: Direct read of the EC memory-mapped region, if supported.
> - * @offset: Is within EC_LPC_ADDR_MEMMAP region.
> - * @bytes: Number of bytes to read. zero means "read a string" (including
> - * the trailing '\0'). At most only EC_MEMMAP_SIZE bytes can be
> - * read. Caller must ensure that the buffer is large enough for the
> - * result when reading a string.
> - * @max_request: Max size of message requested.
> - * @max_response: Max size of message response.
> - * @max_passthru: Max sice of passthru message.
> - * @proto_version: The protocol version used for this device.
> - * @priv: Private data.
> - * @irq: Interrupt to use.
> - * @id: Device id.
> - * @din: Input buffer (for data from EC). This buffer will always be
> - * dword-aligned and include enough space for up to 7 word-alignment
> - * bytes also, so we can ensure that the body of the message is always
> - * dword-aligned (64-bit). We use this alignment to keep ARM and x86
> - * happy. Probably word alignment would be OK, there might be a small
> - * performance advantage to using dword.
> - * @dout: Output buffer (for data to EC). This buffer will always be
> - * dword-aligned and include enough space for up to 7 word-alignment
> - * bytes also, so we can ensure that the body of the message is always
> - * dword-aligned (64-bit). We use this alignment to keep ARM and x86
> - * happy. Probably word alignment would be OK, there might be a small
> - * performance advantage to using dword.
> - * @din_size: Size of din buffer to allocate (zero to use static din).
> - * @dout_size: Size of dout buffer to allocate (zero to use static dout).
> - * @wake_enabled: True if this device can wake the system from sleep.
> - * @suspended: True if this device had been suspended.
> - * @cmd_xfer: Send command to EC and get response.
> - * Returns the number of bytes received if the communication
> - * succeeded, but that doesn't mean the EC was happy with the
> - * command. The caller should check msg.result for the EC's result
> - * code.
> - * @pkt_xfer: Send packet to EC and get response.
> - * @lock: One transaction at a time.
> - * @mkbp_event_supported: True if this EC supports the MKBP event protocol.
> - * @host_sleep_v1: True if this EC supports the sleep v1 command.
> - * @event_notifier: Interrupt event notifier for transport devices.
> - * @event_data: Raw payload transferred with the MKBP event.
> - * @event_size: Size in bytes of the event data.
> - * @host_event_wake_mask: Mask of host events that cause wake from suspend.
> - * @ec: The platform_device used by the mfd driver to interface with the
> - * main EC.
> - * @pd: The platform_device used by the mfd driver to interface with the
> - * PD behind an EC.
> - */
> -struct cros_ec_device {
> - /* These are used by other drivers that want to talk to the EC */
> - const char *phys_name;
> - struct device *dev;
> - bool was_wake_device;
> - struct class *cros_class;
> - int (*cmd_readmem)(struct cros_ec_device *ec, unsigned int offset,
> - unsigned int bytes, void *dest);
> -
> - /* These are used to implement the platform-specific interface */
> - u16 max_request;
> - u16 max_response;
> - u16 max_passthru;
> - u16 proto_version;
> - void *priv;
> - int irq;
> - u8 *din;
> - u8 *dout;
> - int din_size;
> - int dout_size;
> - bool wake_enabled;
> - bool suspended;
> - int (*cmd_xfer)(struct cros_ec_device *ec,
> - struct cros_ec_command *msg);
> - int (*pkt_xfer)(struct cros_ec_device *ec,
> - struct cros_ec_command *msg);
> - struct mutex lock;
> - bool mkbp_event_supported;
> - bool host_sleep_v1;
> - struct blocking_notifier_head event_notifier;
> -
> - struct ec_response_get_next_event_v1 event_data;
> - int event_size;
> - u32 host_event_wake_mask;
> -
> - /* The platform devices used by the mfd driver */
> - struct platform_device *ec;
> - struct platform_device *pd;
> -};
> -
> -/**
> - * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information.
> - * @sensor_num: Id of the sensor, as reported by the EC.
> - */
> -struct cros_ec_sensor_platform {
> - u8 sensor_num;
> -};
> -
> -/**
> - * struct cros_ec_platform - ChromeOS EC platform information.
> - * @ec_name: Name of EC device (e.g. 'cros-ec', 'cros-pd', ...)
> - * used in /dev/ and sysfs.
> - * @cmd_offset: Offset to apply for each command. Set when
> - * registering a device behind another one.
> - */
> -struct cros_ec_platform {
> - const char *ec_name;
> - u16 cmd_offset;
> -};
> -
> -struct cros_ec_debugfs;
>
> /**
> * struct cros_ec_dev - ChromeOS EC device entry point.
> @@ -217,133 +40,4 @@ struct cros_ec_dev {
>
> #define to_cros_ec_dev(dev) container_of(dev, struct cros_ec_dev, class_dev)
>
> -/**
> - * cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device.
> - * @ec_dev: Device to suspend.
> - *
> - * This can be called by drivers to handle a suspend event.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_suspend(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_resume() - Handle a resume operation for the ChromeOS EC device.
> - * @ec_dev: Device to resume.
> - *
> - * This can be called by drivers to handle a resume event.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_resume(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer.
> - * @ec_dev: Device to register.
> - * @msg: Message to write.
> - *
> - * This is intended to be used by all ChromeOS EC drivers, but at present
> - * only SPI uses it. Once LPC uses the same protocol it can start using it.
> - * I2C could use it now, with a refactor of the existing code.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
> - struct cros_ec_command *msg);
> -
> -/**
> - * cros_ec_check_result() - Check ec_msg->result.
> - * @ec_dev: EC device.
> - * @msg: Message to check.
> - *
> - * This is used by ChromeOS EC drivers to check the ec_msg->result for
> - * errors and to warn about them.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_check_result(struct cros_ec_device *ec_dev,
> - struct cros_ec_command *msg);
> -
> -/**
> - * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC.
> - * @ec_dev: EC device.
> - * @msg: Message to write.
> - *
> - * Call this to send a command to the ChromeOS EC. This should be used
> - * instead of calling the EC's cmd_xfer() callback directly.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
> - struct cros_ec_command *msg);
> -
> -/**
> - * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC.
> - * @ec_dev: EC device.
> - * @msg: Message to write.
> - *
> - * This function is identical to cros_ec_cmd_xfer, except it returns success
> - * status only if both the command was transmitted successfully and the EC
> - * replied with success status. It's not necessary to check msg->result when
> - * using this function.
> - *
> - * Return: The number of bytes transferred on success or negative error code.
> - */
> -int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
> - struct cros_ec_command *msg);
> -
> -/**
> - * cros_ec_register() - Register a new ChromeOS EC, using the provided info.
> - * @ec_dev: Device to register.
> - *
> - * Before calling this, allocate a pointer to a new device and then fill
> - * in all the fields up to the --private-- marker.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_register(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_unregister() - Remove a ChromeOS EC.
> - * @ec_dev: Device to unregister.
> - *
> - * Call this to deregister a ChromeOS EC, then clean up any private data.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_unregister(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_query_all() - Query the protocol version supported by the
> - * ChromeOS EC.
> - * @ec_dev: Device to register.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_query_all(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC.
> - * @ec_dev: Device to fetch event from.
> - * @wake_event: Pointer to a bool set to true upon return if the event might be
> - * treated as a wake event. Ignored if null.
> - *
> - * Return: negative error code on errors; 0 for no data; or else number of
> - * bytes received (i.e., an event was retrieved successfully). Event types are
> - * written out to @ec_dev->event_data.event_type on success.
> - */
> -int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event);
> -
> -/**
> - * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC.
> - * @ec_dev: Device to fetch event from.
> - *
> - * When MKBP is supported, when the EC raises an interrupt, we collect the
> - * events raised and call the functions in the ec notifier. This function
> - * is a helper to know which events are raised.
> - *
> - * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*.
> - */
> -u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev);
> -
> #endif /* __LINUX_MFD_CROS_EC_H */
> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
> similarity index 100%
> rename from include/linux/mfd/cros_ec_commands.h
> rename to include/linux/platform_data/cros_ec_commands.h
> diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h
> new file mode 100644
> index 000000000000..34dd9e5c1779
> --- /dev/null
> +++ b/include/linux/platform_data/cros_ec_proto.h
> @@ -0,0 +1,315 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * ChromeOS Embedded Controller protocol interface.
> + *
> + * Copyright (C) 2012 Google, Inc
> + */
> +
> +#ifndef __LINUX_CROS_EC_PROTO_H
> +#define __LINUX_CROS_EC_PROTO_H
> +
> +#include <linux/device.h>
> +#include <linux/mutex.h>
> +#include <linux/notifier.h>
> +
> +#define CROS_EC_DEV_NAME "cros_ec"
> +#define CROS_EC_DEV_FP_NAME "cros_fp"
> +#define CROS_EC_DEV_ISH_NAME "cros_ish"
> +#define CROS_EC_DEV_PD_NAME "cros_pd"
> +#define CROS_EC_DEV_TP_NAME "cros_tp"
> +
> +/*
> + * The EC is unresponsive for a time after a reboot command. Add a
> + * simple delay to make sure that the bus stays locked.
> + */
> +#define EC_REBOOT_DELAY_MS 50
> +
> +/*
> + * Max bus-specific overhead incurred by request/responses.
> + * I2C requires 1 additional byte for requests.
> + * I2C requires 2 additional bytes for responses.
> + * SPI requires up to 32 additional bytes for responses.
> + */
> +#define EC_PROTO_VERSION_UNKNOWN 0
> +#define EC_MAX_REQUEST_OVERHEAD 1
> +#define EC_MAX_RESPONSE_OVERHEAD 32
> +
> +/*
> + * Command interface between EC and AP, for LPC, I2C and SPI interfaces.
> + */
> +enum {
> + EC_MSG_TX_HEADER_BYTES = 3,
> + EC_MSG_TX_TRAILER_BYTES = 1,
> + EC_MSG_TX_PROTO_BYTES = EC_MSG_TX_HEADER_BYTES +
> + EC_MSG_TX_TRAILER_BYTES,
> + EC_MSG_RX_PROTO_BYTES = 3,
> +
> + /* Max length of messages for proto 2*/
> + EC_PROTO2_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE +
> + EC_MSG_TX_PROTO_BYTES,
> +
> + EC_MAX_MSG_BYTES = 64 * 1024,
> +};
> +
> +/**
> + * struct cros_ec_command - Information about a ChromeOS EC command.
> + * @version: Command version number (often 0).
> + * @command: Command to send (EC_CMD_...).
> + * @outsize: Outgoing length in bytes.
> + * @insize: Max number of bytes to accept from the EC.
> + * @result: EC's response to the command (separate from communication failure).
> + * @data: Where to put the incoming data from EC and outgoing data to EC.
> + */
> +struct cros_ec_command {
> + uint32_t version;
> + uint32_t command;
> + uint32_t outsize;
> + uint32_t insize;
> + uint32_t result;
> + uint8_t data[0];
> +};
> +
> +/**
> + * struct cros_ec_device - Information about a ChromeOS EC device.
> + * @phys_name: Name of physical comms layer (e.g. 'i2c-4').
> + * @dev: Device pointer for physical comms device
> + * @was_wake_device: True if this device was set to wake the system from
> + * sleep at the last suspend.
> + * @cros_class: The class structure for this device.
> + * @cmd_readmem: Direct read of the EC memory-mapped region, if supported.
> + * @offset: Is within EC_LPC_ADDR_MEMMAP region.
> + * @bytes: Number of bytes to read. zero means "read a string" (including
> + * the trailing '\0'). At most only EC_MEMMAP_SIZE bytes can be
> + * read. Caller must ensure that the buffer is large enough for the
> + * result when reading a string.
> + * @max_request: Max size of message requested.
> + * @max_response: Max size of message response.
> + * @max_passthru: Max sice of passthru message.
> + * @proto_version: The protocol version used for this device.
> + * @priv: Private data.
> + * @irq: Interrupt to use.
> + * @id: Device id.
> + * @din: Input buffer (for data from EC). This buffer will always be
> + * dword-aligned and include enough space for up to 7 word-alignment
> + * bytes also, so we can ensure that the body of the message is always
> + * dword-aligned (64-bit). We use this alignment to keep ARM and x86
> + * happy. Probably word alignment would be OK, there might be a small
> + * performance advantage to using dword.
> + * @dout: Output buffer (for data to EC). This buffer will always be
> + * dword-aligned and include enough space for up to 7 word-alignment
> + * bytes also, so we can ensure that the body of the message is always
> + * dword-aligned (64-bit). We use this alignment to keep ARM and x86
> + * happy. Probably word alignment would be OK, there might be a small
> + * performance advantage to using dword.
> + * @din_size: Size of din buffer to allocate (zero to use static din).
> + * @dout_size: Size of dout buffer to allocate (zero to use static dout).
> + * @wake_enabled: True if this device can wake the system from sleep.
> + * @suspended: True if this device had been suspended.
> + * @cmd_xfer: Send command to EC and get response.
> + * Returns the number of bytes received if the communication
> + * succeeded, but that doesn't mean the EC was happy with the
> + * command. The caller should check msg.result for the EC's result
> + * code.
> + * @pkt_xfer: Send packet to EC and get response.
> + * @lock: One transaction at a time.
> + * @mkbp_event_supported: True if this EC supports the MKBP event protocol.
> + * @host_sleep_v1: True if this EC supports the sleep v1 command.
> + * @event_notifier: Interrupt event notifier for transport devices.
> + * @event_data: Raw payload transferred with the MKBP event.
> + * @event_size: Size in bytes of the event data.
> + * @host_event_wake_mask: Mask of host events that cause wake from suspend.
> + * @ec: The platform_device used by the mfd driver to interface with the
> + * main EC.
> + * @pd: The platform_device used by the mfd driver to interface with the
> + * PD behind an EC.
> + */
> +struct cros_ec_device {
> + /* These are used by other drivers that want to talk to the EC */
> + const char *phys_name;
> + struct device *dev;
> + bool was_wake_device;
> + struct class *cros_class;
> + int (*cmd_readmem)(struct cros_ec_device *ec, unsigned int offset,
> + unsigned int bytes, void *dest);
> +
> + /* These are used to implement the platform-specific interface */
> + u16 max_request;
> + u16 max_response;
> + u16 max_passthru;
> + u16 proto_version;
> + void *priv;
> + int irq;
> + u8 *din;
> + u8 *dout;
> + int din_size;
> + int dout_size;
> + bool wake_enabled;
> + bool suspended;
> + int (*cmd_xfer)(struct cros_ec_device *ec,
> + struct cros_ec_command *msg);
> + int (*pkt_xfer)(struct cros_ec_device *ec,
> + struct cros_ec_command *msg);
> + struct mutex lock;
> + bool mkbp_event_supported;
> + bool host_sleep_v1;
> + struct blocking_notifier_head event_notifier;
> +
> + struct ec_response_get_next_event_v1 event_data;
> + int event_size;
> + u32 host_event_wake_mask;
> +
> + /* The platform devices used by the mfd driver */
> + struct platform_device *ec;
> + struct platform_device *pd;
> +};
> +
> +/**
> + * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information.
> + * @sensor_num: Id of the sensor, as reported by the EC.
> + */
> +struct cros_ec_sensor_platform {
> + u8 sensor_num;
> +};
> +
> +/**
> + * struct cros_ec_platform - ChromeOS EC platform information.
> + * @ec_name: Name of EC device (e.g. 'cros-ec', 'cros-pd', ...)
> + * used in /dev/ and sysfs.
> + * @cmd_offset: Offset to apply for each command. Set when
> + * registering a device behind another one.
> + */
> +struct cros_ec_platform {
> + const char *ec_name;
> + u16 cmd_offset;
> +};
> +
> +/**
> + * cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device.
> + * @ec_dev: Device to suspend.
> + *
> + * This can be called by drivers to handle a suspend event.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_suspend(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_resume() - Handle a resume operation for the ChromeOS EC device.
> + * @ec_dev: Device to resume.
> + *
> + * This can be called by drivers to handle a resume event.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_resume(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer.
> + * @ec_dev: Device to register.
> + * @msg: Message to write.
> + *
> + * This is intended to be used by all ChromeOS EC drivers, but at present
> + * only SPI uses it. Once LPC uses the same protocol it can start using it.
> + * I2C could use it now, with a refactor of the existing code.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> + * cros_ec_check_result() - Check ec_msg->result.
> + * @ec_dev: EC device.
> + * @msg: Message to check.
> + *
> + * This is used by ChromeOS EC drivers to check the ec_msg->result for
> + * errors and to warn about them.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_check_result(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> + * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC.
> + * @ec_dev: EC device.
> + * @msg: Message to write.
> + *
> + * Call this to send a command to the ChromeOS EC. This should be used
> + * instead of calling the EC's cmd_xfer() callback directly.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> + * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC.
> + * @ec_dev: EC device.
> + * @msg: Message to write.
> + *
> + * This function is identical to cros_ec_cmd_xfer, except it returns success
> + * status only if both the command was transmitted successfully and the EC
> + * replied with success status. It's not necessary to check msg->result when
> + * using this function.
> + *
> + * Return: The number of bytes transferred on success or negative error code.
> + */
> +int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> + * cros_ec_register() - Register a new ChromeOS EC, using the provided info.
> + * @ec_dev: Device to register.
> + *
> + * Before calling this, allocate a pointer to a new device and then fill
> + * in all the fields up to the --private-- marker.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_register(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_unregister() - Remove a ChromeOS EC.
> + * @ec_dev: Device to unregister.
> + *
> + * Call this to deregister a ChromeOS EC, then clean up any private data.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_unregister(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_query_all() - Query the protocol version supported by the
> + * ChromeOS EC.
> + * @ec_dev: Device to register.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_query_all(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC.
> + * @ec_dev: Device to fetch event from.
> + * @wake_event: Pointer to a bool set to true upon return if the event might be
> + * treated as a wake event. Ignored if null.
> + *
> + * Return: negative error code on errors; 0 for no data; or else number of
> + * bytes received (i.e., an event was retrieved successfully). Event types are
> + * written out to @ec_dev->event_data.event_type on success.
> + */
> +int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event);
> +
> +/**
> + * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC.
> + * @ec_dev: Device to fetch event from.
> + *
> + * When MKBP is supported, when the EC raises an interrupt, we collect the
> + * events raised and call the functions in the ec notifier. This function
> + * is a helper to know which events are raised.
> + *
> + * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*.
> + */
> +u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev);
> +
> +#endif /* __LINUX_CROS_EC_PROTO_H */
> diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
> index 87830ed5ebf4..79bb4081d3c2 100644
> --- a/sound/soc/codecs/cros_ec_codec.c
> +++ b/sound/soc/codecs/cros_ec_codec.c
> @@ -9,9 +9,9 @@
> #include <linux/delay.h>
> #include <linux/device.h>
> #include <linux/kernel.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <sound/pcm.h>
> #include <sound/pcm_params.h>
On Tue, Jun 4, 2019 at 5:21 PM Enric Balletbo i Serra
<[email protected]> wrote:
>
> There is a bit of mess between cros-ec mfd includes and platform
> includes. For example, we have a linux/mfd/cros_ec.h include that
> exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
> we have a linux/mfd/cros_ec_commands.h file that is non related to the
> multifunction device (in the sense that is not exporting any function of
> the mfd device). This causes crossed includes between mfd and
> platform/chrome subsystems and makes the code difficult to read, apart
> from creating 'curious' situations where a platform/chrome driver includes
> a linux/mfd/cros_ec.h file just to get the exported functions that are
> implemented in another platform/chrome driver.
>
> In order to have a better separation on what the cros-ec multifunction
> driver does and what the cros-ec core provides move and rework the
> affected includes doing:
>
> - Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
> - Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
> driver from include/linux/mfd/cros_ec.h to a new file
> include/linux/platform_data/cros_ec_proto.h
> - Update all the drivers with the new includes, so
> - Drivers that only need to know about the protocol include
> - linux/platform_data/cros_ec_proto.h
> - linux/platform_data/cros_ec_commands.h
> - Drivers that need to know about the cros-ec mfd device also include
> - linux/mfd/cros_ec.h
>
> Signed-off-by: Enric Balletbo i Serra <[email protected]>
> ---
Acked-by: Benjamin Tissoires <[email protected]> # for the HID part
Cheers,
Benjamin
>
> drivers/extcon/extcon-usbc-cros-ec.c | 3 +-
> drivers/hid/hid-google-hammer.c | 4 +-
> drivers/i2c/busses/i2c-cros-ec-tunnel.c | 4 +-
> drivers/iio/accel/cros_ec_accel_legacy.c | 3 +-
> .../common/cros_ec_sensors/cros_ec_sensors.c | 3 +-
> .../cros_ec_sensors/cros_ec_sensors_core.c | 3 +-
> drivers/iio/light/cros_ec_light_prox.c | 3 +-
> drivers/iio/pressure/cros_ec_baro.c | 3 +-
> drivers/input/keyboard/cros_ec_keyb.c | 4 +-
> .../media/platform/cros-ec-cec/cros-ec-cec.c | 4 +-
> drivers/mfd/cros_ec_dev.c | 3 +-
> drivers/platform/chrome/cros_ec.c | 3 +-
> drivers/platform/chrome/cros_ec_chardev.c | 4 +-
> drivers/platform/chrome/cros_ec_debugfs.c | 3 +-
> drivers/platform/chrome/cros_ec_i2c.c | 4 +-
> drivers/platform/chrome/cros_ec_lightbar.c | 3 +-
> drivers/platform/chrome/cros_ec_lpc.c | 4 +-
> drivers/platform/chrome/cros_ec_lpc_reg.c | 4 +-
> drivers/platform/chrome/cros_ec_proto.c | 3 +-
> drivers/platform/chrome/cros_ec_rpmsg.c | 4 +-
> drivers/platform/chrome/cros_ec_spi.c | 4 +-
> drivers/platform/chrome/cros_ec_sysfs.c | 3 +-
> drivers/platform/chrome/cros_ec_trace.c | 2 +-
> drivers/platform/chrome/cros_ec_trace.h | 4 +-
> drivers/platform/chrome/cros_ec_vbc.c | 3 +-
> drivers/platform/chrome/cros_usbpd_logger.c | 5 +-
> drivers/power/supply/cros_usbpd-charger.c | 5 +-
> drivers/pwm/pwm-cros-ec.c | 4 +-
> drivers/rtc/rtc-cros-ec.c | 3 +-
> .../linux/iio/common/cros_ec_sensors_core.h | 3 +-
> include/linux/mfd/cros_ec.h | 306 -----------------
> .../{mfd => platform_data}/cros_ec_commands.h | 0
> include/linux/platform_data/cros_ec_proto.h | 315 ++++++++++++++++++
> sound/soc/codecs/cros_ec_codec.c | 4 +-
> 34 files changed, 379 insertions(+), 351 deletions(-)
> rename include/linux/{mfd => platform_data}/cros_ec_commands.h (100%)
> create mode 100644 include/linux/platform_data/cros_ec_proto.h
>
> diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c
> index 43c0a936ab82..5290cc2d19d9 100644
> --- a/drivers/extcon/extcon-usbc-cros-ec.c
> +++ b/drivers/extcon/extcon-usbc-cros-ec.c
> @@ -6,10 +6,11 @@
>
> #include <linux/extcon-provider.h>
> #include <linux/kernel.h>
> -#include <linux/mfd/cros_ec.h>
> #include <linux/module.h>
> #include <linux/notifier.h>
> #include <linux/of.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/sched.h>
> diff --git a/drivers/hid/hid-google-hammer.c b/drivers/hid/hid-google-hammer.c
> index ee5e0bdcf078..84f8c127ebdc 100644
> --- a/drivers/hid/hid-google-hammer.c
> +++ b/drivers/hid/hid-google-hammer.c
> @@ -16,9 +16,9 @@
> #include <linux/acpi.h>
> #include <linux/hid.h>
> #include <linux/leds.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/pm_wakeup.h>
> #include <asm/unaligned.h>
> diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> index 82bcd9a78759..c551aa96a2e3 100644
> --- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> @@ -5,8 +5,8 @@
>
> #include <linux/module.h>
> #include <linux/i2c.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c
> index 46bb2e421bb9..fd9a634f741e 100644
> --- a/drivers/iio/accel/cros_ec_accel_legacy.c
> +++ b/drivers/iio/accel/cros_ec_accel_legacy.c
> @@ -18,9 +18,10 @@
> #include <linux/iio/triggered_buffer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/slab.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
>
> #define DRV_NAME "cros-ec-accel-legacy"
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> index 17af4e0fd5f8..40dc24ff0ee5 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> @@ -17,8 +17,9 @@
> #include <linux/iio/triggered_buffer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> index 719a0df5aeeb..fd63315399ac 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> @@ -14,9 +14,10 @@
> #include <linux/iio/trigger_consumer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/slab.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
>
> static char *cros_ec_loc[] = {
> diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
> index 308ee6ff2e22..437e0eae9178 100644
> --- a/drivers/iio/light/cros_ec_light_prox.c
> +++ b/drivers/iio/light/cros_ec_light_prox.c
> @@ -15,8 +15,9 @@
> #include <linux/iio/trigger_consumer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c
> index 034ce98d6e97..956dc01f1295 100644
> --- a/drivers/iio/pressure/cros_ec_baro.c
> +++ b/drivers/iio/pressure/cros_ec_baro.c
> @@ -15,9 +15,10 @@
> #include <linux/iio/trigger_consumer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/slab.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
>
> /*
> diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
> index d56001181598..2b71c5a51f90 100644
> --- a/drivers/input/keyboard/cros_ec_keyb.c
> +++ b/drivers/input/keyboard/cros_ec_keyb.c
> @@ -22,8 +22,8 @@
> #include <linux/slab.h>
> #include <linux/sysrq.h>
> #include <linux/input/matrix_keypad.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> #include <asm/unaligned.h>
>
> diff --git a/drivers/media/platform/cros-ec-cec/cros-ec-cec.c b/drivers/media/platform/cros-ec-cec/cros-ec-cec.c
> index 068df9888dbf..2e4e263a4a94 100644
> --- a/drivers/media/platform/cros-ec-cec/cros-ec-cec.c
> +++ b/drivers/media/platform/cros-ec-cec/cros-ec-cec.c
> @@ -16,8 +16,8 @@
> #include <linux/interrupt.h>
> #include <media/cec.h>
> #include <media/cec-notifier.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> #define DRV_NAME "cros-ec-cec"
>
> diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
> index c7a5dfa36874..5481df4e1216 100644
> --- a/drivers/mfd/cros_ec_dev.c
> +++ b/drivers/mfd/cros_ec_dev.c
> @@ -7,11 +7,12 @@
>
> #include <linux/mfd/core.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/mod_devicetable.h>
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/slab.h>
>
> #define DRV_NAME "cros-ec-dev"
> diff --git a/drivers/platform/chrome/cros_ec.c b/drivers/platform/chrome/cros_ec.c
> index 11fced7917fc..9800597ccd96 100644
> --- a/drivers/platform/chrome/cros_ec.c
> +++ b/drivers/platform/chrome/cros_ec.c
> @@ -21,7 +21,8 @@
> #include <linux/interrupt.h>
> #include <linux/slab.h>
> #include <linux/module.h>
> -#include <linux/mfd/cros_ec.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/suspend.h>
> #include <asm/unaligned.h>
>
> diff --git a/drivers/platform/chrome/cros_ec_chardev.c b/drivers/platform/chrome/cros_ec_chardev.c
> index 1a0a27080026..786b941a60df 100644
> --- a/drivers/platform/chrome/cros_ec_chardev.c
> +++ b/drivers/platform/chrome/cros_ec_chardev.c
> @@ -9,10 +9,10 @@
> #include <linux/device.h>
> #include <linux/fs.h>
> #include <linux/list.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/miscdevice.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/spinlock.h>
> diff --git a/drivers/platform/chrome/cros_ec_debugfs.c b/drivers/platform/chrome/cros_ec_debugfs.c
> index 4c2a27f6a6d0..b088d91be9c9 100644
> --- a/drivers/platform/chrome/cros_ec_debugfs.c
> +++ b/drivers/platform/chrome/cros_ec_debugfs.c
> @@ -8,9 +8,10 @@
> #include <linux/delay.h>
> #include <linux/fs.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/mutex.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/poll.h>
> #include <linux/sched.h>
> diff --git a/drivers/platform/chrome/cros_ec_i2c.c b/drivers/platform/chrome/cros_ec_i2c.c
> index 6bb82dfa7dae..9bd97bc8454b 100644
> --- a/drivers/platform/chrome/cros_ec_i2c.c
> +++ b/drivers/platform/chrome/cros_ec_i2c.c
> @@ -9,8 +9,8 @@
> #include <linux/module.h>
> #include <linux/i2c.h>
> #include <linux/interrupt.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> diff --git a/drivers/platform/chrome/cros_ec_lightbar.c b/drivers/platform/chrome/cros_ec_lightbar.c
> index d30a6650b0b5..caa26da2c788 100644
> --- a/drivers/platform/chrome/cros_ec_lightbar.c
> +++ b/drivers/platform/chrome/cros_ec_lightbar.c
> @@ -9,8 +9,9 @@
> #include <linux/fs.h>
> #include <linux/kobject.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/sched.h>
> #include <linux/types.h>
> diff --git a/drivers/platform/chrome/cros_ec_lpc.c b/drivers/platform/chrome/cros_ec_lpc.c
> index 2c7e654cf89c..0c976e95998a 100644
> --- a/drivers/platform/chrome/cros_ec_lpc.c
> +++ b/drivers/platform/chrome/cros_ec_lpc.c
> @@ -16,9 +16,9 @@
> #include <linux/delay.h>
> #include <linux/io.h>
> #include <linux/interrupt.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/printk.h>
> #include <linux/suspend.h>
> diff --git a/drivers/platform/chrome/cros_ec_lpc_reg.c b/drivers/platform/chrome/cros_ec_lpc_reg.c
> index 0f5cd0ac8b49..dec9a779e209 100644
> --- a/drivers/platform/chrome/cros_ec_lpc_reg.c
> +++ b/drivers/platform/chrome/cros_ec_lpc_reg.c
> @@ -4,8 +4,8 @@
> // Copyright (C) 2016 Google, Inc
>
> #include <linux/io.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> #include "cros_ec_lpc_mec.h"
>
> diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
> index 3d2325197a68..f659f96bda12 100644
> --- a/drivers/platform/chrome/cros_ec_proto.c
> +++ b/drivers/platform/chrome/cros_ec_proto.c
> @@ -3,10 +3,11 @@
> //
> // Copyright (C) 2015 Google, Inc
>
> -#include <linux/mfd/cros_ec.h>
> #include <linux/delay.h>
> #include <linux/device.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/slab.h>
> #include <asm/unaligned.h>
>
> diff --git a/drivers/platform/chrome/cros_ec_rpmsg.c b/drivers/platform/chrome/cros_ec_rpmsg.c
> index 520e507bfa54..9633e5417686 100644
> --- a/drivers/platform/chrome/cros_ec_rpmsg.c
> +++ b/drivers/platform/chrome/cros_ec_rpmsg.c
> @@ -6,9 +6,9 @@
> #include <linux/delay.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/of.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/rpmsg.h>
> #include <linux/slab.h>
> diff --git a/drivers/platform/chrome/cros_ec_spi.c b/drivers/platform/chrome/cros_ec_spi.c
> index 2e21f2776063..9006e1872942 100644
> --- a/drivers/platform/chrome/cros_ec_spi.c
> +++ b/drivers/platform/chrome/cros_ec_spi.c
> @@ -6,9 +6,9 @@
> #include <linux/delay.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/of.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/spi/spi.h>
> diff --git a/drivers/platform/chrome/cros_ec_sysfs.c b/drivers/platform/chrome/cros_ec_sysfs.c
> index fe0b7614ae1b..0caeb8d0989d 100644
> --- a/drivers/platform/chrome/cros_ec_sysfs.c
> +++ b/drivers/platform/chrome/cros_ec_sysfs.c
> @@ -9,8 +9,9 @@
> #include <linux/fs.h>
> #include <linux/kobject.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/printk.h>
> #include <linux/slab.h>
> diff --git a/drivers/platform/chrome/cros_ec_trace.c b/drivers/platform/chrome/cros_ec_trace.c
> index 0a76412095a9..6f80ff4532ae 100644
> --- a/drivers/platform/chrome/cros_ec_trace.c
> +++ b/drivers/platform/chrome/cros_ec_trace.c
> @@ -6,7 +6,7 @@
> #define TRACE_SYMBOL(a) {a, #a}
>
> // Generate the list using the following script:
> -// sed -n 's/^#define \(EC_CMD_[[:alnum:]_]*\)\s.*/\tTRACE_SYMBOL(\1), \\/p' include/linux/mfd/cros_ec_commands.h
> +// sed -n 's/^#define \(EC_CMD_[[:alnum:]_]*\)\s.*/\tTRACE_SYMBOL(\1), \\/p' include/linux/platform_data/cros_ec_commands.h
> #define EC_CMDS \
> TRACE_SYMBOL(EC_CMD_PROTO_VERSION), \
> TRACE_SYMBOL(EC_CMD_HELLO), \
> diff --git a/drivers/platform/chrome/cros_ec_trace.h b/drivers/platform/chrome/cros_ec_trace.h
> index 7ae3b89c78b9..0dd4df30fa89 100644
> --- a/drivers/platform/chrome/cros_ec_trace.h
> +++ b/drivers/platform/chrome/cros_ec_trace.h
> @@ -11,8 +11,10 @@
> #if !defined(_CROS_EC_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
> #define _CROS_EC_TRACE_H_
>
> +#include <linux/bits.h>
> #include <linux/types.h>
> -#include <linux/mfd/cros_ec.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> #include <linux/tracepoint.h>
>
> diff --git a/drivers/platform/chrome/cros_ec_vbc.c b/drivers/platform/chrome/cros_ec_vbc.c
> index 8392a1ec33a7..cffe119e7a7a 100644
> --- a/drivers/platform/chrome/cros_ec_vbc.c
> +++ b/drivers/platform/chrome/cros_ec_vbc.c
> @@ -7,8 +7,9 @@
> #include <linux/of.h>
> #include <linux/platform_device.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/slab.h>
>
> #define DRV_NAME "cros-ec-vbc"
> diff --git a/drivers/platform/chrome/cros_usbpd_logger.c b/drivers/platform/chrome/cros_usbpd_logger.c
> index 7c7b267626a0..c549a9b49b56 100644
> --- a/drivers/platform/chrome/cros_usbpd_logger.c
> +++ b/drivers/platform/chrome/cros_usbpd_logger.c
> @@ -6,10 +6,11 @@
> */
>
> #include <linux/ktime.h>
> -#include <linux/math64.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/math64.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/rtc.h>
>
> diff --git a/drivers/power/supply/cros_usbpd-charger.c b/drivers/power/supply/cros_usbpd-charger.c
> index 3a9ea94c3de3..6cc7c3910e09 100644
> --- a/drivers/power/supply/cros_usbpd-charger.c
> +++ b/drivers/power/supply/cros_usbpd-charger.c
> @@ -5,9 +5,10 @@
> * Copyright (c) 2014 - 2018 Google, Inc
> */
>
> -#include <linux/module.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/power_supply.h>
> #include <linux/slab.h>
> diff --git a/drivers/pwm/pwm-cros-ec.c b/drivers/pwm/pwm-cros-ec.c
> index 98f6ac6cf6ab..85bea2d40b7d 100644
> --- a/drivers/pwm/pwm-cros-ec.c
> +++ b/drivers/pwm/pwm-cros-ec.c
> @@ -6,8 +6,8 @@
> */
>
> #include <linux/module.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/pwm.h>
> #include <linux/slab.h>
> diff --git a/drivers/rtc/rtc-cros-ec.c b/drivers/rtc/rtc-cros-ec.c
> index 4d6bf9304ceb..6909e01936d9 100644
> --- a/drivers/rtc/rtc-cros-ec.c
> +++ b/drivers/rtc/rtc-cros-ec.c
> @@ -6,8 +6,9 @@
>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/rtc.h>
> #include <linux/slab.h>
> diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
> index ce16445411ac..8a91669f5bed 100644
> --- a/include/linux/iio/common/cros_ec_sensors_core.h
> +++ b/include/linux/iio/common/cros_ec_sensors_core.h
> @@ -18,7 +18,8 @@
>
> #include <linux/iio/iio.h>
> #include <linux/irqreturn.h>
> -#include <linux/mfd/cros_ec.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> enum {
> CROS_EC_SENSOR_X,
> diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
> index 2a1372d167b9..e0bae49535e1 100644
> --- a/include/linux/mfd/cros_ec.h
> +++ b/include/linux/mfd/cros_ec.h
> @@ -16,184 +16,7 @@
> #ifndef __LINUX_MFD_CROS_EC_H
> #define __LINUX_MFD_CROS_EC_H
>
> -#include <linux/cdev.h>
> #include <linux/device.h>
> -#include <linux/notifier.h>
> -#include <linux/mfd/cros_ec_commands.h>
> -#include <linux/mutex.h>
> -
> -#define CROS_EC_DEV_NAME "cros_ec"
> -#define CROS_EC_DEV_FP_NAME "cros_fp"
> -#define CROS_EC_DEV_PD_NAME "cros_pd"
> -#define CROS_EC_DEV_TP_NAME "cros_tp"
> -#define CROS_EC_DEV_ISH_NAME "cros_ish"
> -
> -/*
> - * The EC is unresponsive for a time after a reboot command. Add a
> - * simple delay to make sure that the bus stays locked.
> - */
> -#define EC_REBOOT_DELAY_MS 50
> -
> -/*
> - * Max bus-specific overhead incurred by request/responses.
> - * I2C requires 1 additional byte for requests.
> - * I2C requires 2 additional bytes for responses.
> - * SPI requires up to 32 additional bytes for responses.
> - */
> -#define EC_PROTO_VERSION_UNKNOWN 0
> -#define EC_MAX_REQUEST_OVERHEAD 1
> -#define EC_MAX_RESPONSE_OVERHEAD 32
> -
> -/*
> - * Command interface between EC and AP, for LPC, I2C and SPI interfaces.
> - */
> -enum {
> - EC_MSG_TX_HEADER_BYTES = 3,
> - EC_MSG_TX_TRAILER_BYTES = 1,
> - EC_MSG_TX_PROTO_BYTES = EC_MSG_TX_HEADER_BYTES +
> - EC_MSG_TX_TRAILER_BYTES,
> - EC_MSG_RX_PROTO_BYTES = 3,
> -
> - /* Max length of messages for proto 2*/
> - EC_PROTO2_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE +
> - EC_MSG_TX_PROTO_BYTES,
> -
> - EC_MAX_MSG_BYTES = 64 * 1024,
> -};
> -
> -/**
> - * struct cros_ec_command - Information about a ChromeOS EC command.
> - * @version: Command version number (often 0).
> - * @command: Command to send (EC_CMD_...).
> - * @outsize: Outgoing length in bytes.
> - * @insize: Max number of bytes to accept from the EC.
> - * @result: EC's response to the command (separate from communication failure).
> - * @data: Where to put the incoming data from EC and outgoing data to EC.
> - */
> -struct cros_ec_command {
> - uint32_t version;
> - uint32_t command;
> - uint32_t outsize;
> - uint32_t insize;
> - uint32_t result;
> - uint8_t data[0];
> -};
> -
> -/**
> - * struct cros_ec_device - Information about a ChromeOS EC device.
> - * @phys_name: Name of physical comms layer (e.g. 'i2c-4').
> - * @dev: Device pointer for physical comms device
> - * @was_wake_device: True if this device was set to wake the system from
> - * sleep at the last suspend.
> - * @cros_class: The class structure for this device.
> - * @cmd_readmem: Direct read of the EC memory-mapped region, if supported.
> - * @offset: Is within EC_LPC_ADDR_MEMMAP region.
> - * @bytes: Number of bytes to read. zero means "read a string" (including
> - * the trailing '\0'). At most only EC_MEMMAP_SIZE bytes can be
> - * read. Caller must ensure that the buffer is large enough for the
> - * result when reading a string.
> - * @max_request: Max size of message requested.
> - * @max_response: Max size of message response.
> - * @max_passthru: Max sice of passthru message.
> - * @proto_version: The protocol version used for this device.
> - * @priv: Private data.
> - * @irq: Interrupt to use.
> - * @id: Device id.
> - * @din: Input buffer (for data from EC). This buffer will always be
> - * dword-aligned and include enough space for up to 7 word-alignment
> - * bytes also, so we can ensure that the body of the message is always
> - * dword-aligned (64-bit). We use this alignment to keep ARM and x86
> - * happy. Probably word alignment would be OK, there might be a small
> - * performance advantage to using dword.
> - * @dout: Output buffer (for data to EC). This buffer will always be
> - * dword-aligned and include enough space for up to 7 word-alignment
> - * bytes also, so we can ensure that the body of the message is always
> - * dword-aligned (64-bit). We use this alignment to keep ARM and x86
> - * happy. Probably word alignment would be OK, there might be a small
> - * performance advantage to using dword.
> - * @din_size: Size of din buffer to allocate (zero to use static din).
> - * @dout_size: Size of dout buffer to allocate (zero to use static dout).
> - * @wake_enabled: True if this device can wake the system from sleep.
> - * @suspended: True if this device had been suspended.
> - * @cmd_xfer: Send command to EC and get response.
> - * Returns the number of bytes received if the communication
> - * succeeded, but that doesn't mean the EC was happy with the
> - * command. The caller should check msg.result for the EC's result
> - * code.
> - * @pkt_xfer: Send packet to EC and get response.
> - * @lock: One transaction at a time.
> - * @mkbp_event_supported: True if this EC supports the MKBP event protocol.
> - * @host_sleep_v1: True if this EC supports the sleep v1 command.
> - * @event_notifier: Interrupt event notifier for transport devices.
> - * @event_data: Raw payload transferred with the MKBP event.
> - * @event_size: Size in bytes of the event data.
> - * @host_event_wake_mask: Mask of host events that cause wake from suspend.
> - * @ec: The platform_device used by the mfd driver to interface with the
> - * main EC.
> - * @pd: The platform_device used by the mfd driver to interface with the
> - * PD behind an EC.
> - */
> -struct cros_ec_device {
> - /* These are used by other drivers that want to talk to the EC */
> - const char *phys_name;
> - struct device *dev;
> - bool was_wake_device;
> - struct class *cros_class;
> - int (*cmd_readmem)(struct cros_ec_device *ec, unsigned int offset,
> - unsigned int bytes, void *dest);
> -
> - /* These are used to implement the platform-specific interface */
> - u16 max_request;
> - u16 max_response;
> - u16 max_passthru;
> - u16 proto_version;
> - void *priv;
> - int irq;
> - u8 *din;
> - u8 *dout;
> - int din_size;
> - int dout_size;
> - bool wake_enabled;
> - bool suspended;
> - int (*cmd_xfer)(struct cros_ec_device *ec,
> - struct cros_ec_command *msg);
> - int (*pkt_xfer)(struct cros_ec_device *ec,
> - struct cros_ec_command *msg);
> - struct mutex lock;
> - bool mkbp_event_supported;
> - bool host_sleep_v1;
> - struct blocking_notifier_head event_notifier;
> -
> - struct ec_response_get_next_event_v1 event_data;
> - int event_size;
> - u32 host_event_wake_mask;
> -
> - /* The platform devices used by the mfd driver */
> - struct platform_device *ec;
> - struct platform_device *pd;
> -};
> -
> -/**
> - * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information.
> - * @sensor_num: Id of the sensor, as reported by the EC.
> - */
> -struct cros_ec_sensor_platform {
> - u8 sensor_num;
> -};
> -
> -/**
> - * struct cros_ec_platform - ChromeOS EC platform information.
> - * @ec_name: Name of EC device (e.g. 'cros-ec', 'cros-pd', ...)
> - * used in /dev/ and sysfs.
> - * @cmd_offset: Offset to apply for each command. Set when
> - * registering a device behind another one.
> - */
> -struct cros_ec_platform {
> - const char *ec_name;
> - u16 cmd_offset;
> -};
> -
> -struct cros_ec_debugfs;
>
> /**
> * struct cros_ec_dev - ChromeOS EC device entry point.
> @@ -217,133 +40,4 @@ struct cros_ec_dev {
>
> #define to_cros_ec_dev(dev) container_of(dev, struct cros_ec_dev, class_dev)
>
> -/**
> - * cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device.
> - * @ec_dev: Device to suspend.
> - *
> - * This can be called by drivers to handle a suspend event.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_suspend(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_resume() - Handle a resume operation for the ChromeOS EC device.
> - * @ec_dev: Device to resume.
> - *
> - * This can be called by drivers to handle a resume event.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_resume(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer.
> - * @ec_dev: Device to register.
> - * @msg: Message to write.
> - *
> - * This is intended to be used by all ChromeOS EC drivers, but at present
> - * only SPI uses it. Once LPC uses the same protocol it can start using it.
> - * I2C could use it now, with a refactor of the existing code.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
> - struct cros_ec_command *msg);
> -
> -/**
> - * cros_ec_check_result() - Check ec_msg->result.
> - * @ec_dev: EC device.
> - * @msg: Message to check.
> - *
> - * This is used by ChromeOS EC drivers to check the ec_msg->result for
> - * errors and to warn about them.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_check_result(struct cros_ec_device *ec_dev,
> - struct cros_ec_command *msg);
> -
> -/**
> - * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC.
> - * @ec_dev: EC device.
> - * @msg: Message to write.
> - *
> - * Call this to send a command to the ChromeOS EC. This should be used
> - * instead of calling the EC's cmd_xfer() callback directly.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
> - struct cros_ec_command *msg);
> -
> -/**
> - * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC.
> - * @ec_dev: EC device.
> - * @msg: Message to write.
> - *
> - * This function is identical to cros_ec_cmd_xfer, except it returns success
> - * status only if both the command was transmitted successfully and the EC
> - * replied with success status. It's not necessary to check msg->result when
> - * using this function.
> - *
> - * Return: The number of bytes transferred on success or negative error code.
> - */
> -int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
> - struct cros_ec_command *msg);
> -
> -/**
> - * cros_ec_register() - Register a new ChromeOS EC, using the provided info.
> - * @ec_dev: Device to register.
> - *
> - * Before calling this, allocate a pointer to a new device and then fill
> - * in all the fields up to the --private-- marker.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_register(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_unregister() - Remove a ChromeOS EC.
> - * @ec_dev: Device to unregister.
> - *
> - * Call this to deregister a ChromeOS EC, then clean up any private data.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_unregister(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_query_all() - Query the protocol version supported by the
> - * ChromeOS EC.
> - * @ec_dev: Device to register.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_query_all(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC.
> - * @ec_dev: Device to fetch event from.
> - * @wake_event: Pointer to a bool set to true upon return if the event might be
> - * treated as a wake event. Ignored if null.
> - *
> - * Return: negative error code on errors; 0 for no data; or else number of
> - * bytes received (i.e., an event was retrieved successfully). Event types are
> - * written out to @ec_dev->event_data.event_type on success.
> - */
> -int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event);
> -
> -/**
> - * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC.
> - * @ec_dev: Device to fetch event from.
> - *
> - * When MKBP is supported, when the EC raises an interrupt, we collect the
> - * events raised and call the functions in the ec notifier. This function
> - * is a helper to know which events are raised.
> - *
> - * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*.
> - */
> -u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev);
> -
> #endif /* __LINUX_MFD_CROS_EC_H */
> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
> similarity index 100%
> rename from include/linux/mfd/cros_ec_commands.h
> rename to include/linux/platform_data/cros_ec_commands.h
> diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h
> new file mode 100644
> index 000000000000..34dd9e5c1779
> --- /dev/null
> +++ b/include/linux/platform_data/cros_ec_proto.h
> @@ -0,0 +1,315 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * ChromeOS Embedded Controller protocol interface.
> + *
> + * Copyright (C) 2012 Google, Inc
> + */
> +
> +#ifndef __LINUX_CROS_EC_PROTO_H
> +#define __LINUX_CROS_EC_PROTO_H
> +
> +#include <linux/device.h>
> +#include <linux/mutex.h>
> +#include <linux/notifier.h>
> +
> +#define CROS_EC_DEV_NAME "cros_ec"
> +#define CROS_EC_DEV_FP_NAME "cros_fp"
> +#define CROS_EC_DEV_ISH_NAME "cros_ish"
> +#define CROS_EC_DEV_PD_NAME "cros_pd"
> +#define CROS_EC_DEV_TP_NAME "cros_tp"
> +
> +/*
> + * The EC is unresponsive for a time after a reboot command. Add a
> + * simple delay to make sure that the bus stays locked.
> + */
> +#define EC_REBOOT_DELAY_MS 50
> +
> +/*
> + * Max bus-specific overhead incurred by request/responses.
> + * I2C requires 1 additional byte for requests.
> + * I2C requires 2 additional bytes for responses.
> + * SPI requires up to 32 additional bytes for responses.
> + */
> +#define EC_PROTO_VERSION_UNKNOWN 0
> +#define EC_MAX_REQUEST_OVERHEAD 1
> +#define EC_MAX_RESPONSE_OVERHEAD 32
> +
> +/*
> + * Command interface between EC and AP, for LPC, I2C and SPI interfaces.
> + */
> +enum {
> + EC_MSG_TX_HEADER_BYTES = 3,
> + EC_MSG_TX_TRAILER_BYTES = 1,
> + EC_MSG_TX_PROTO_BYTES = EC_MSG_TX_HEADER_BYTES +
> + EC_MSG_TX_TRAILER_BYTES,
> + EC_MSG_RX_PROTO_BYTES = 3,
> +
> + /* Max length of messages for proto 2*/
> + EC_PROTO2_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE +
> + EC_MSG_TX_PROTO_BYTES,
> +
> + EC_MAX_MSG_BYTES = 64 * 1024,
> +};
> +
> +/**
> + * struct cros_ec_command - Information about a ChromeOS EC command.
> + * @version: Command version number (often 0).
> + * @command: Command to send (EC_CMD_...).
> + * @outsize: Outgoing length in bytes.
> + * @insize: Max number of bytes to accept from the EC.
> + * @result: EC's response to the command (separate from communication failure).
> + * @data: Where to put the incoming data from EC and outgoing data to EC.
> + */
> +struct cros_ec_command {
> + uint32_t version;
> + uint32_t command;
> + uint32_t outsize;
> + uint32_t insize;
> + uint32_t result;
> + uint8_t data[0];
> +};
> +
> +/**
> + * struct cros_ec_device - Information about a ChromeOS EC device.
> + * @phys_name: Name of physical comms layer (e.g. 'i2c-4').
> + * @dev: Device pointer for physical comms device
> + * @was_wake_device: True if this device was set to wake the system from
> + * sleep at the last suspend.
> + * @cros_class: The class structure for this device.
> + * @cmd_readmem: Direct read of the EC memory-mapped region, if supported.
> + * @offset: Is within EC_LPC_ADDR_MEMMAP region.
> + * @bytes: Number of bytes to read. zero means "read a string" (including
> + * the trailing '\0'). At most only EC_MEMMAP_SIZE bytes can be
> + * read. Caller must ensure that the buffer is large enough for the
> + * result when reading a string.
> + * @max_request: Max size of message requested.
> + * @max_response: Max size of message response.
> + * @max_passthru: Max sice of passthru message.
> + * @proto_version: The protocol version used for this device.
> + * @priv: Private data.
> + * @irq: Interrupt to use.
> + * @id: Device id.
> + * @din: Input buffer (for data from EC). This buffer will always be
> + * dword-aligned and include enough space for up to 7 word-alignment
> + * bytes also, so we can ensure that the body of the message is always
> + * dword-aligned (64-bit). We use this alignment to keep ARM and x86
> + * happy. Probably word alignment would be OK, there might be a small
> + * performance advantage to using dword.
> + * @dout: Output buffer (for data to EC). This buffer will always be
> + * dword-aligned and include enough space for up to 7 word-alignment
> + * bytes also, so we can ensure that the body of the message is always
> + * dword-aligned (64-bit). We use this alignment to keep ARM and x86
> + * happy. Probably word alignment would be OK, there might be a small
> + * performance advantage to using dword.
> + * @din_size: Size of din buffer to allocate (zero to use static din).
> + * @dout_size: Size of dout buffer to allocate (zero to use static dout).
> + * @wake_enabled: True if this device can wake the system from sleep.
> + * @suspended: True if this device had been suspended.
> + * @cmd_xfer: Send command to EC and get response.
> + * Returns the number of bytes received if the communication
> + * succeeded, but that doesn't mean the EC was happy with the
> + * command. The caller should check msg.result for the EC's result
> + * code.
> + * @pkt_xfer: Send packet to EC and get response.
> + * @lock: One transaction at a time.
> + * @mkbp_event_supported: True if this EC supports the MKBP event protocol.
> + * @host_sleep_v1: True if this EC supports the sleep v1 command.
> + * @event_notifier: Interrupt event notifier for transport devices.
> + * @event_data: Raw payload transferred with the MKBP event.
> + * @event_size: Size in bytes of the event data.
> + * @host_event_wake_mask: Mask of host events that cause wake from suspend.
> + * @ec: The platform_device used by the mfd driver to interface with the
> + * main EC.
> + * @pd: The platform_device used by the mfd driver to interface with the
> + * PD behind an EC.
> + */
> +struct cros_ec_device {
> + /* These are used by other drivers that want to talk to the EC */
> + const char *phys_name;
> + struct device *dev;
> + bool was_wake_device;
> + struct class *cros_class;
> + int (*cmd_readmem)(struct cros_ec_device *ec, unsigned int offset,
> + unsigned int bytes, void *dest);
> +
> + /* These are used to implement the platform-specific interface */
> + u16 max_request;
> + u16 max_response;
> + u16 max_passthru;
> + u16 proto_version;
> + void *priv;
> + int irq;
> + u8 *din;
> + u8 *dout;
> + int din_size;
> + int dout_size;
> + bool wake_enabled;
> + bool suspended;
> + int (*cmd_xfer)(struct cros_ec_device *ec,
> + struct cros_ec_command *msg);
> + int (*pkt_xfer)(struct cros_ec_device *ec,
> + struct cros_ec_command *msg);
> + struct mutex lock;
> + bool mkbp_event_supported;
> + bool host_sleep_v1;
> + struct blocking_notifier_head event_notifier;
> +
> + struct ec_response_get_next_event_v1 event_data;
> + int event_size;
> + u32 host_event_wake_mask;
> +
> + /* The platform devices used by the mfd driver */
> + struct platform_device *ec;
> + struct platform_device *pd;
> +};
> +
> +/**
> + * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information.
> + * @sensor_num: Id of the sensor, as reported by the EC.
> + */
> +struct cros_ec_sensor_platform {
> + u8 sensor_num;
> +};
> +
> +/**
> + * struct cros_ec_platform - ChromeOS EC platform information.
> + * @ec_name: Name of EC device (e.g. 'cros-ec', 'cros-pd', ...)
> + * used in /dev/ and sysfs.
> + * @cmd_offset: Offset to apply for each command. Set when
> + * registering a device behind another one.
> + */
> +struct cros_ec_platform {
> + const char *ec_name;
> + u16 cmd_offset;
> +};
> +
> +/**
> + * cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device.
> + * @ec_dev: Device to suspend.
> + *
> + * This can be called by drivers to handle a suspend event.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_suspend(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_resume() - Handle a resume operation for the ChromeOS EC device.
> + * @ec_dev: Device to resume.
> + *
> + * This can be called by drivers to handle a resume event.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_resume(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer.
> + * @ec_dev: Device to register.
> + * @msg: Message to write.
> + *
> + * This is intended to be used by all ChromeOS EC drivers, but at present
> + * only SPI uses it. Once LPC uses the same protocol it can start using it.
> + * I2C could use it now, with a refactor of the existing code.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> + * cros_ec_check_result() - Check ec_msg->result.
> + * @ec_dev: EC device.
> + * @msg: Message to check.
> + *
> + * This is used by ChromeOS EC drivers to check the ec_msg->result for
> + * errors and to warn about them.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_check_result(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> + * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC.
> + * @ec_dev: EC device.
> + * @msg: Message to write.
> + *
> + * Call this to send a command to the ChromeOS EC. This should be used
> + * instead of calling the EC's cmd_xfer() callback directly.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> + * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC.
> + * @ec_dev: EC device.
> + * @msg: Message to write.
> + *
> + * This function is identical to cros_ec_cmd_xfer, except it returns success
> + * status only if both the command was transmitted successfully and the EC
> + * replied with success status. It's not necessary to check msg->result when
> + * using this function.
> + *
> + * Return: The number of bytes transferred on success or negative error code.
> + */
> +int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> + * cros_ec_register() - Register a new ChromeOS EC, using the provided info.
> + * @ec_dev: Device to register.
> + *
> + * Before calling this, allocate a pointer to a new device and then fill
> + * in all the fields up to the --private-- marker.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_register(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_unregister() - Remove a ChromeOS EC.
> + * @ec_dev: Device to unregister.
> + *
> + * Call this to deregister a ChromeOS EC, then clean up any private data.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_unregister(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_query_all() - Query the protocol version supported by the
> + * ChromeOS EC.
> + * @ec_dev: Device to register.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_query_all(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC.
> + * @ec_dev: Device to fetch event from.
> + * @wake_event: Pointer to a bool set to true upon return if the event might be
> + * treated as a wake event. Ignored if null.
> + *
> + * Return: negative error code on errors; 0 for no data; or else number of
> + * bytes received (i.e., an event was retrieved successfully). Event types are
> + * written out to @ec_dev->event_data.event_type on success.
> + */
> +int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event);
> +
> +/**
> + * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC.
> + * @ec_dev: Device to fetch event from.
> + *
> + * When MKBP is supported, when the EC raises an interrupt, we collect the
> + * events raised and call the functions in the ec notifier. This function
> + * is a helper to know which events are raised.
> + *
> + * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*.
> + */
> +u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev);
> +
> +#endif /* __LINUX_CROS_EC_PROTO_H */
> diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
> index 87830ed5ebf4..79bb4081d3c2 100644
> --- a/sound/soc/codecs/cros_ec_codec.c
> +++ b/sound/soc/codecs/cros_ec_codec.c
> @@ -9,9 +9,9 @@
> #include <linux/delay.h>
> #include <linux/device.h>
> #include <linux/kernel.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <sound/pcm.h>
> #include <sound/pcm_params.h>
> --
> 2.20.1
>
On Tue, Jun 04, 2019 at 05:20:15PM +0200, Enric Balletbo i Serra wrote:
> There is a bit of mess between cros-ec mfd includes and platform
> includes. For example, we have a linux/mfd/cros_ec.h include that
> exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
> we have a linux/mfd/cros_ec_commands.h file that is non related to the
> multifunction device (in the sense that is not exporting any function of
> the mfd device). This causes crossed includes between mfd and
> platform/chrome subsystems and makes the code difficult to read, apart
> from creating 'curious' situations where a platform/chrome driver includes
> a linux/mfd/cros_ec.h file just to get the exported functions that are
> implemented in another platform/chrome driver.
>
> In order to have a better separation on what the cros-ec multifunction
> driver does and what the cros-ec core provides move and rework the
> affected includes doing:
>
> - Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
> - Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
> driver from include/linux/mfd/cros_ec.h to a new file
> include/linux/platform_data/cros_ec_proto.h
> - Update all the drivers with the new includes, so
> - Drivers that only need to know about the protocol include
> - linux/platform_data/cros_ec_proto.h
> - linux/platform_data/cros_ec_commands.h
> - Drivers that need to know about the cros-ec mfd device also include
> - linux/mfd/cros_ec.h
>
> Signed-off-by: Enric Balletbo i Serra <[email protected]>
Acked-by: Dmitry Torokhov <[email protected]> # for input
Thanks.
--
Dmitry
Hi,
On Tue, Jun 04, 2019 at 05:20:15PM +0200, Enric Balletbo i Serra wrote:
> There is a bit of mess between cros-ec mfd includes and platform
> includes. For example, we have a linux/mfd/cros_ec.h include that
> exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
> we have a linux/mfd/cros_ec_commands.h file that is non related to the
> multifunction device (in the sense that is not exporting any function of
> the mfd device). This causes crossed includes between mfd and
> platform/chrome subsystems and makes the code difficult to read, apart
> from creating 'curious' situations where a platform/chrome driver includes
> a linux/mfd/cros_ec.h file just to get the exported functions that are
> implemented in another platform/chrome driver.
>
> In order to have a better separation on what the cros-ec multifunction
> driver does and what the cros-ec core provides move and rework the
> affected includes doing:
>
> - Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
> - Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
> driver from include/linux/mfd/cros_ec.h to a new file
> include/linux/platform_data/cros_ec_proto.h
> - Update all the drivers with the new includes, so
> - Drivers that only need to know about the protocol include
> - linux/platform_data/cros_ec_proto.h
> - linux/platform_data/cros_ec_commands.h
> - Drivers that need to know about the cros-ec mfd device also include
> - linux/mfd/cros_ec.h
>
> Signed-off-by: Enric Balletbo i Serra <[email protected]>
> ---
Acked-by: Sebastian Reichel <[email protected]>
-- Sebastian
> drivers/extcon/extcon-usbc-cros-ec.c | 3 +-
> drivers/hid/hid-google-hammer.c | 4 +-
> drivers/i2c/busses/i2c-cros-ec-tunnel.c | 4 +-
> drivers/iio/accel/cros_ec_accel_legacy.c | 3 +-
> .../common/cros_ec_sensors/cros_ec_sensors.c | 3 +-
> .../cros_ec_sensors/cros_ec_sensors_core.c | 3 +-
> drivers/iio/light/cros_ec_light_prox.c | 3 +-
> drivers/iio/pressure/cros_ec_baro.c | 3 +-
> drivers/input/keyboard/cros_ec_keyb.c | 4 +-
> .../media/platform/cros-ec-cec/cros-ec-cec.c | 4 +-
> drivers/mfd/cros_ec_dev.c | 3 +-
> drivers/platform/chrome/cros_ec.c | 3 +-
> drivers/platform/chrome/cros_ec_chardev.c | 4 +-
> drivers/platform/chrome/cros_ec_debugfs.c | 3 +-
> drivers/platform/chrome/cros_ec_i2c.c | 4 +-
> drivers/platform/chrome/cros_ec_lightbar.c | 3 +-
> drivers/platform/chrome/cros_ec_lpc.c | 4 +-
> drivers/platform/chrome/cros_ec_lpc_reg.c | 4 +-
> drivers/platform/chrome/cros_ec_proto.c | 3 +-
> drivers/platform/chrome/cros_ec_rpmsg.c | 4 +-
> drivers/platform/chrome/cros_ec_spi.c | 4 +-
> drivers/platform/chrome/cros_ec_sysfs.c | 3 +-
> drivers/platform/chrome/cros_ec_trace.c | 2 +-
> drivers/platform/chrome/cros_ec_trace.h | 4 +-
> drivers/platform/chrome/cros_ec_vbc.c | 3 +-
> drivers/platform/chrome/cros_usbpd_logger.c | 5 +-
> drivers/power/supply/cros_usbpd-charger.c | 5 +-
> drivers/pwm/pwm-cros-ec.c | 4 +-
> drivers/rtc/rtc-cros-ec.c | 3 +-
> .../linux/iio/common/cros_ec_sensors_core.h | 3 +-
> include/linux/mfd/cros_ec.h | 306 -----------------
> .../{mfd => platform_data}/cros_ec_commands.h | 0
> include/linux/platform_data/cros_ec_proto.h | 315 ++++++++++++++++++
> sound/soc/codecs/cros_ec_codec.c | 4 +-
> 34 files changed, 379 insertions(+), 351 deletions(-)
> rename include/linux/{mfd => platform_data}/cros_ec_commands.h (100%)
> create mode 100644 include/linux/platform_data/cros_ec_proto.h
>
> diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c
> index 43c0a936ab82..5290cc2d19d9 100644
> --- a/drivers/extcon/extcon-usbc-cros-ec.c
> +++ b/drivers/extcon/extcon-usbc-cros-ec.c
> @@ -6,10 +6,11 @@
>
> #include <linux/extcon-provider.h>
> #include <linux/kernel.h>
> -#include <linux/mfd/cros_ec.h>
> #include <linux/module.h>
> #include <linux/notifier.h>
> #include <linux/of.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/sched.h>
> diff --git a/drivers/hid/hid-google-hammer.c b/drivers/hid/hid-google-hammer.c
> index ee5e0bdcf078..84f8c127ebdc 100644
> --- a/drivers/hid/hid-google-hammer.c
> +++ b/drivers/hid/hid-google-hammer.c
> @@ -16,9 +16,9 @@
> #include <linux/acpi.h>
> #include <linux/hid.h>
> #include <linux/leds.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/pm_wakeup.h>
> #include <asm/unaligned.h>
> diff --git a/drivers/i2c/busses/i2c-cros-ec-tunnel.c b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> index 82bcd9a78759..c551aa96a2e3 100644
> --- a/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> +++ b/drivers/i2c/busses/i2c-cros-ec-tunnel.c
> @@ -5,8 +5,8 @@
>
> #include <linux/module.h>
> #include <linux/i2c.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> diff --git a/drivers/iio/accel/cros_ec_accel_legacy.c b/drivers/iio/accel/cros_ec_accel_legacy.c
> index 46bb2e421bb9..fd9a634f741e 100644
> --- a/drivers/iio/accel/cros_ec_accel_legacy.c
> +++ b/drivers/iio/accel/cros_ec_accel_legacy.c
> @@ -18,9 +18,10 @@
> #include <linux/iio/triggered_buffer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/slab.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
>
> #define DRV_NAME "cros-ec-accel-legacy"
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> index 17af4e0fd5f8..40dc24ff0ee5 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors.c
> @@ -17,8 +17,9 @@
> #include <linux/iio/triggered_buffer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> index 719a0df5aeeb..fd63315399ac 100644
> --- a/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_sensors_core.c
> @@ -14,9 +14,10 @@
> #include <linux/iio/trigger_consumer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/slab.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
>
> static char *cros_ec_loc[] = {
> diff --git a/drivers/iio/light/cros_ec_light_prox.c b/drivers/iio/light/cros_ec_light_prox.c
> index 308ee6ff2e22..437e0eae9178 100644
> --- a/drivers/iio/light/cros_ec_light_prox.c
> +++ b/drivers/iio/light/cros_ec_light_prox.c
> @@ -15,8 +15,9 @@
> #include <linux/iio/trigger_consumer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> diff --git a/drivers/iio/pressure/cros_ec_baro.c b/drivers/iio/pressure/cros_ec_baro.c
> index 034ce98d6e97..956dc01f1295 100644
> --- a/drivers/iio/pressure/cros_ec_baro.c
> +++ b/drivers/iio/pressure/cros_ec_baro.c
> @@ -15,9 +15,10 @@
> #include <linux/iio/trigger_consumer.h>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/slab.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
>
> /*
> diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c
> index d56001181598..2b71c5a51f90 100644
> --- a/drivers/input/keyboard/cros_ec_keyb.c
> +++ b/drivers/input/keyboard/cros_ec_keyb.c
> @@ -22,8 +22,8 @@
> #include <linux/slab.h>
> #include <linux/sysrq.h>
> #include <linux/input/matrix_keypad.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> #include <asm/unaligned.h>
>
> diff --git a/drivers/media/platform/cros-ec-cec/cros-ec-cec.c b/drivers/media/platform/cros-ec-cec/cros-ec-cec.c
> index 068df9888dbf..2e4e263a4a94 100644
> --- a/drivers/media/platform/cros-ec-cec/cros-ec-cec.c
> +++ b/drivers/media/platform/cros-ec-cec/cros-ec-cec.c
> @@ -16,8 +16,8 @@
> #include <linux/interrupt.h>
> #include <media/cec.h>
> #include <media/cec-notifier.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> #define DRV_NAME "cros-ec-cec"
>
> diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
> index c7a5dfa36874..5481df4e1216 100644
> --- a/drivers/mfd/cros_ec_dev.c
> +++ b/drivers/mfd/cros_ec_dev.c
> @@ -7,11 +7,12 @@
>
> #include <linux/mfd/core.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/mod_devicetable.h>
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/slab.h>
>
> #define DRV_NAME "cros-ec-dev"
> diff --git a/drivers/platform/chrome/cros_ec.c b/drivers/platform/chrome/cros_ec.c
> index 11fced7917fc..9800597ccd96 100644
> --- a/drivers/platform/chrome/cros_ec.c
> +++ b/drivers/platform/chrome/cros_ec.c
> @@ -21,7 +21,8 @@
> #include <linux/interrupt.h>
> #include <linux/slab.h>
> #include <linux/module.h>
> -#include <linux/mfd/cros_ec.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/suspend.h>
> #include <asm/unaligned.h>
>
> diff --git a/drivers/platform/chrome/cros_ec_chardev.c b/drivers/platform/chrome/cros_ec_chardev.c
> index 1a0a27080026..786b941a60df 100644
> --- a/drivers/platform/chrome/cros_ec_chardev.c
> +++ b/drivers/platform/chrome/cros_ec_chardev.c
> @@ -9,10 +9,10 @@
> #include <linux/device.h>
> #include <linux/fs.h>
> #include <linux/list.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/miscdevice.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/spinlock.h>
> diff --git a/drivers/platform/chrome/cros_ec_debugfs.c b/drivers/platform/chrome/cros_ec_debugfs.c
> index 4c2a27f6a6d0..b088d91be9c9 100644
> --- a/drivers/platform/chrome/cros_ec_debugfs.c
> +++ b/drivers/platform/chrome/cros_ec_debugfs.c
> @@ -8,9 +8,10 @@
> #include <linux/delay.h>
> #include <linux/fs.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> #include <linux/mutex.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/poll.h>
> #include <linux/sched.h>
> diff --git a/drivers/platform/chrome/cros_ec_i2c.c b/drivers/platform/chrome/cros_ec_i2c.c
> index 6bb82dfa7dae..9bd97bc8454b 100644
> --- a/drivers/platform/chrome/cros_ec_i2c.c
> +++ b/drivers/platform/chrome/cros_ec_i2c.c
> @@ -9,8 +9,8 @@
> #include <linux/module.h>
> #include <linux/i2c.h>
> #include <linux/interrupt.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
>
> diff --git a/drivers/platform/chrome/cros_ec_lightbar.c b/drivers/platform/chrome/cros_ec_lightbar.c
> index d30a6650b0b5..caa26da2c788 100644
> --- a/drivers/platform/chrome/cros_ec_lightbar.c
> +++ b/drivers/platform/chrome/cros_ec_lightbar.c
> @@ -9,8 +9,9 @@
> #include <linux/fs.h>
> #include <linux/kobject.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/sched.h>
> #include <linux/types.h>
> diff --git a/drivers/platform/chrome/cros_ec_lpc.c b/drivers/platform/chrome/cros_ec_lpc.c
> index 2c7e654cf89c..0c976e95998a 100644
> --- a/drivers/platform/chrome/cros_ec_lpc.c
> +++ b/drivers/platform/chrome/cros_ec_lpc.c
> @@ -16,9 +16,9 @@
> #include <linux/delay.h>
> #include <linux/io.h>
> #include <linux/interrupt.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/printk.h>
> #include <linux/suspend.h>
> diff --git a/drivers/platform/chrome/cros_ec_lpc_reg.c b/drivers/platform/chrome/cros_ec_lpc_reg.c
> index 0f5cd0ac8b49..dec9a779e209 100644
> --- a/drivers/platform/chrome/cros_ec_lpc_reg.c
> +++ b/drivers/platform/chrome/cros_ec_lpc_reg.c
> @@ -4,8 +4,8 @@
> // Copyright (C) 2016 Google, Inc
>
> #include <linux/io.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> #include "cros_ec_lpc_mec.h"
>
> diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
> index 3d2325197a68..f659f96bda12 100644
> --- a/drivers/platform/chrome/cros_ec_proto.c
> +++ b/drivers/platform/chrome/cros_ec_proto.c
> @@ -3,10 +3,11 @@
> //
> // Copyright (C) 2015 Google, Inc
>
> -#include <linux/mfd/cros_ec.h>
> #include <linux/delay.h>
> #include <linux/device.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/slab.h>
> #include <asm/unaligned.h>
>
> diff --git a/drivers/platform/chrome/cros_ec_rpmsg.c b/drivers/platform/chrome/cros_ec_rpmsg.c
> index 520e507bfa54..9633e5417686 100644
> --- a/drivers/platform/chrome/cros_ec_rpmsg.c
> +++ b/drivers/platform/chrome/cros_ec_rpmsg.c
> @@ -6,9 +6,9 @@
> #include <linux/delay.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/of.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/rpmsg.h>
> #include <linux/slab.h>
> diff --git a/drivers/platform/chrome/cros_ec_spi.c b/drivers/platform/chrome/cros_ec_spi.c
> index 2e21f2776063..9006e1872942 100644
> --- a/drivers/platform/chrome/cros_ec_spi.c
> +++ b/drivers/platform/chrome/cros_ec_spi.c
> @@ -6,9 +6,9 @@
> #include <linux/delay.h>
> #include <linux/kernel.h>
> #include <linux/module.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/of.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/slab.h>
> #include <linux/spi/spi.h>
> diff --git a/drivers/platform/chrome/cros_ec_sysfs.c b/drivers/platform/chrome/cros_ec_sysfs.c
> index fe0b7614ae1b..0caeb8d0989d 100644
> --- a/drivers/platform/chrome/cros_ec_sysfs.c
> +++ b/drivers/platform/chrome/cros_ec_sysfs.c
> @@ -9,8 +9,9 @@
> #include <linux/fs.h>
> #include <linux/kobject.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/printk.h>
> #include <linux/slab.h>
> diff --git a/drivers/platform/chrome/cros_ec_trace.c b/drivers/platform/chrome/cros_ec_trace.c
> index 0a76412095a9..6f80ff4532ae 100644
> --- a/drivers/platform/chrome/cros_ec_trace.c
> +++ b/drivers/platform/chrome/cros_ec_trace.c
> @@ -6,7 +6,7 @@
> #define TRACE_SYMBOL(a) {a, #a}
>
> // Generate the list using the following script:
> -// sed -n 's/^#define \(EC_CMD_[[:alnum:]_]*\)\s.*/\tTRACE_SYMBOL(\1), \\/p' include/linux/mfd/cros_ec_commands.h
> +// sed -n 's/^#define \(EC_CMD_[[:alnum:]_]*\)\s.*/\tTRACE_SYMBOL(\1), \\/p' include/linux/platform_data/cros_ec_commands.h
> #define EC_CMDS \
> TRACE_SYMBOL(EC_CMD_PROTO_VERSION), \
> TRACE_SYMBOL(EC_CMD_HELLO), \
> diff --git a/drivers/platform/chrome/cros_ec_trace.h b/drivers/platform/chrome/cros_ec_trace.h
> index 7ae3b89c78b9..0dd4df30fa89 100644
> --- a/drivers/platform/chrome/cros_ec_trace.h
> +++ b/drivers/platform/chrome/cros_ec_trace.h
> @@ -11,8 +11,10 @@
> #if !defined(_CROS_EC_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
> #define _CROS_EC_TRACE_H_
>
> +#include <linux/bits.h>
> #include <linux/types.h>
> -#include <linux/mfd/cros_ec.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> #include <linux/tracepoint.h>
>
> diff --git a/drivers/platform/chrome/cros_ec_vbc.c b/drivers/platform/chrome/cros_ec_vbc.c
> index 8392a1ec33a7..cffe119e7a7a 100644
> --- a/drivers/platform/chrome/cros_ec_vbc.c
> +++ b/drivers/platform/chrome/cros_ec_vbc.c
> @@ -7,8 +7,9 @@
> #include <linux/of.h>
> #include <linux/platform_device.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/slab.h>
>
> #define DRV_NAME "cros-ec-vbc"
> diff --git a/drivers/platform/chrome/cros_usbpd_logger.c b/drivers/platform/chrome/cros_usbpd_logger.c
> index 7c7b267626a0..c549a9b49b56 100644
> --- a/drivers/platform/chrome/cros_usbpd_logger.c
> +++ b/drivers/platform/chrome/cros_usbpd_logger.c
> @@ -6,10 +6,11 @@
> */
>
> #include <linux/ktime.h>
> -#include <linux/math64.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/math64.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/rtc.h>
>
> diff --git a/drivers/power/supply/cros_usbpd-charger.c b/drivers/power/supply/cros_usbpd-charger.c
> index 3a9ea94c3de3..6cc7c3910e09 100644
> --- a/drivers/power/supply/cros_usbpd-charger.c
> +++ b/drivers/power/supply/cros_usbpd-charger.c
> @@ -5,9 +5,10 @@
> * Copyright (c) 2014 - 2018 Google, Inc
> */
>
> -#include <linux/module.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/power_supply.h>
> #include <linux/slab.h>
> diff --git a/drivers/pwm/pwm-cros-ec.c b/drivers/pwm/pwm-cros-ec.c
> index 98f6ac6cf6ab..85bea2d40b7d 100644
> --- a/drivers/pwm/pwm-cros-ec.c
> +++ b/drivers/pwm/pwm-cros-ec.c
> @@ -6,8 +6,8 @@
> */
>
> #include <linux/module.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/pwm.h>
> #include <linux/slab.h>
> diff --git a/drivers/rtc/rtc-cros-ec.c b/drivers/rtc/rtc-cros-ec.c
> index 4d6bf9304ceb..6909e01936d9 100644
> --- a/drivers/rtc/rtc-cros-ec.c
> +++ b/drivers/rtc/rtc-cros-ec.c
> @@ -6,8 +6,9 @@
>
> #include <linux/kernel.h>
> #include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <linux/rtc.h>
> #include <linux/slab.h>
> diff --git a/include/linux/iio/common/cros_ec_sensors_core.h b/include/linux/iio/common/cros_ec_sensors_core.h
> index ce16445411ac..8a91669f5bed 100644
> --- a/include/linux/iio/common/cros_ec_sensors_core.h
> +++ b/include/linux/iio/common/cros_ec_sensors_core.h
> @@ -18,7 +18,8 @@
>
> #include <linux/iio/iio.h>
> #include <linux/irqreturn.h>
> -#include <linux/mfd/cros_ec.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
>
> enum {
> CROS_EC_SENSOR_X,
> diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h
> index 2a1372d167b9..e0bae49535e1 100644
> --- a/include/linux/mfd/cros_ec.h
> +++ b/include/linux/mfd/cros_ec.h
> @@ -16,184 +16,7 @@
> #ifndef __LINUX_MFD_CROS_EC_H
> #define __LINUX_MFD_CROS_EC_H
>
> -#include <linux/cdev.h>
> #include <linux/device.h>
> -#include <linux/notifier.h>
> -#include <linux/mfd/cros_ec_commands.h>
> -#include <linux/mutex.h>
> -
> -#define CROS_EC_DEV_NAME "cros_ec"
> -#define CROS_EC_DEV_FP_NAME "cros_fp"
> -#define CROS_EC_DEV_PD_NAME "cros_pd"
> -#define CROS_EC_DEV_TP_NAME "cros_tp"
> -#define CROS_EC_DEV_ISH_NAME "cros_ish"
> -
> -/*
> - * The EC is unresponsive for a time after a reboot command. Add a
> - * simple delay to make sure that the bus stays locked.
> - */
> -#define EC_REBOOT_DELAY_MS 50
> -
> -/*
> - * Max bus-specific overhead incurred by request/responses.
> - * I2C requires 1 additional byte for requests.
> - * I2C requires 2 additional bytes for responses.
> - * SPI requires up to 32 additional bytes for responses.
> - */
> -#define EC_PROTO_VERSION_UNKNOWN 0
> -#define EC_MAX_REQUEST_OVERHEAD 1
> -#define EC_MAX_RESPONSE_OVERHEAD 32
> -
> -/*
> - * Command interface between EC and AP, for LPC, I2C and SPI interfaces.
> - */
> -enum {
> - EC_MSG_TX_HEADER_BYTES = 3,
> - EC_MSG_TX_TRAILER_BYTES = 1,
> - EC_MSG_TX_PROTO_BYTES = EC_MSG_TX_HEADER_BYTES +
> - EC_MSG_TX_TRAILER_BYTES,
> - EC_MSG_RX_PROTO_BYTES = 3,
> -
> - /* Max length of messages for proto 2*/
> - EC_PROTO2_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE +
> - EC_MSG_TX_PROTO_BYTES,
> -
> - EC_MAX_MSG_BYTES = 64 * 1024,
> -};
> -
> -/**
> - * struct cros_ec_command - Information about a ChromeOS EC command.
> - * @version: Command version number (often 0).
> - * @command: Command to send (EC_CMD_...).
> - * @outsize: Outgoing length in bytes.
> - * @insize: Max number of bytes to accept from the EC.
> - * @result: EC's response to the command (separate from communication failure).
> - * @data: Where to put the incoming data from EC and outgoing data to EC.
> - */
> -struct cros_ec_command {
> - uint32_t version;
> - uint32_t command;
> - uint32_t outsize;
> - uint32_t insize;
> - uint32_t result;
> - uint8_t data[0];
> -};
> -
> -/**
> - * struct cros_ec_device - Information about a ChromeOS EC device.
> - * @phys_name: Name of physical comms layer (e.g. 'i2c-4').
> - * @dev: Device pointer for physical comms device
> - * @was_wake_device: True if this device was set to wake the system from
> - * sleep at the last suspend.
> - * @cros_class: The class structure for this device.
> - * @cmd_readmem: Direct read of the EC memory-mapped region, if supported.
> - * @offset: Is within EC_LPC_ADDR_MEMMAP region.
> - * @bytes: Number of bytes to read. zero means "read a string" (including
> - * the trailing '\0'). At most only EC_MEMMAP_SIZE bytes can be
> - * read. Caller must ensure that the buffer is large enough for the
> - * result when reading a string.
> - * @max_request: Max size of message requested.
> - * @max_response: Max size of message response.
> - * @max_passthru: Max sice of passthru message.
> - * @proto_version: The protocol version used for this device.
> - * @priv: Private data.
> - * @irq: Interrupt to use.
> - * @id: Device id.
> - * @din: Input buffer (for data from EC). This buffer will always be
> - * dword-aligned and include enough space for up to 7 word-alignment
> - * bytes also, so we can ensure that the body of the message is always
> - * dword-aligned (64-bit). We use this alignment to keep ARM and x86
> - * happy. Probably word alignment would be OK, there might be a small
> - * performance advantage to using dword.
> - * @dout: Output buffer (for data to EC). This buffer will always be
> - * dword-aligned and include enough space for up to 7 word-alignment
> - * bytes also, so we can ensure that the body of the message is always
> - * dword-aligned (64-bit). We use this alignment to keep ARM and x86
> - * happy. Probably word alignment would be OK, there might be a small
> - * performance advantage to using dword.
> - * @din_size: Size of din buffer to allocate (zero to use static din).
> - * @dout_size: Size of dout buffer to allocate (zero to use static dout).
> - * @wake_enabled: True if this device can wake the system from sleep.
> - * @suspended: True if this device had been suspended.
> - * @cmd_xfer: Send command to EC and get response.
> - * Returns the number of bytes received if the communication
> - * succeeded, but that doesn't mean the EC was happy with the
> - * command. The caller should check msg.result for the EC's result
> - * code.
> - * @pkt_xfer: Send packet to EC and get response.
> - * @lock: One transaction at a time.
> - * @mkbp_event_supported: True if this EC supports the MKBP event protocol.
> - * @host_sleep_v1: True if this EC supports the sleep v1 command.
> - * @event_notifier: Interrupt event notifier for transport devices.
> - * @event_data: Raw payload transferred with the MKBP event.
> - * @event_size: Size in bytes of the event data.
> - * @host_event_wake_mask: Mask of host events that cause wake from suspend.
> - * @ec: The platform_device used by the mfd driver to interface with the
> - * main EC.
> - * @pd: The platform_device used by the mfd driver to interface with the
> - * PD behind an EC.
> - */
> -struct cros_ec_device {
> - /* These are used by other drivers that want to talk to the EC */
> - const char *phys_name;
> - struct device *dev;
> - bool was_wake_device;
> - struct class *cros_class;
> - int (*cmd_readmem)(struct cros_ec_device *ec, unsigned int offset,
> - unsigned int bytes, void *dest);
> -
> - /* These are used to implement the platform-specific interface */
> - u16 max_request;
> - u16 max_response;
> - u16 max_passthru;
> - u16 proto_version;
> - void *priv;
> - int irq;
> - u8 *din;
> - u8 *dout;
> - int din_size;
> - int dout_size;
> - bool wake_enabled;
> - bool suspended;
> - int (*cmd_xfer)(struct cros_ec_device *ec,
> - struct cros_ec_command *msg);
> - int (*pkt_xfer)(struct cros_ec_device *ec,
> - struct cros_ec_command *msg);
> - struct mutex lock;
> - bool mkbp_event_supported;
> - bool host_sleep_v1;
> - struct blocking_notifier_head event_notifier;
> -
> - struct ec_response_get_next_event_v1 event_data;
> - int event_size;
> - u32 host_event_wake_mask;
> -
> - /* The platform devices used by the mfd driver */
> - struct platform_device *ec;
> - struct platform_device *pd;
> -};
> -
> -/**
> - * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information.
> - * @sensor_num: Id of the sensor, as reported by the EC.
> - */
> -struct cros_ec_sensor_platform {
> - u8 sensor_num;
> -};
> -
> -/**
> - * struct cros_ec_platform - ChromeOS EC platform information.
> - * @ec_name: Name of EC device (e.g. 'cros-ec', 'cros-pd', ...)
> - * used in /dev/ and sysfs.
> - * @cmd_offset: Offset to apply for each command. Set when
> - * registering a device behind another one.
> - */
> -struct cros_ec_platform {
> - const char *ec_name;
> - u16 cmd_offset;
> -};
> -
> -struct cros_ec_debugfs;
>
> /**
> * struct cros_ec_dev - ChromeOS EC device entry point.
> @@ -217,133 +40,4 @@ struct cros_ec_dev {
>
> #define to_cros_ec_dev(dev) container_of(dev, struct cros_ec_dev, class_dev)
>
> -/**
> - * cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device.
> - * @ec_dev: Device to suspend.
> - *
> - * This can be called by drivers to handle a suspend event.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_suspend(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_resume() - Handle a resume operation for the ChromeOS EC device.
> - * @ec_dev: Device to resume.
> - *
> - * This can be called by drivers to handle a resume event.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_resume(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer.
> - * @ec_dev: Device to register.
> - * @msg: Message to write.
> - *
> - * This is intended to be used by all ChromeOS EC drivers, but at present
> - * only SPI uses it. Once LPC uses the same protocol it can start using it.
> - * I2C could use it now, with a refactor of the existing code.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
> - struct cros_ec_command *msg);
> -
> -/**
> - * cros_ec_check_result() - Check ec_msg->result.
> - * @ec_dev: EC device.
> - * @msg: Message to check.
> - *
> - * This is used by ChromeOS EC drivers to check the ec_msg->result for
> - * errors and to warn about them.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_check_result(struct cros_ec_device *ec_dev,
> - struct cros_ec_command *msg);
> -
> -/**
> - * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC.
> - * @ec_dev: EC device.
> - * @msg: Message to write.
> - *
> - * Call this to send a command to the ChromeOS EC. This should be used
> - * instead of calling the EC's cmd_xfer() callback directly.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
> - struct cros_ec_command *msg);
> -
> -/**
> - * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC.
> - * @ec_dev: EC device.
> - * @msg: Message to write.
> - *
> - * This function is identical to cros_ec_cmd_xfer, except it returns success
> - * status only if both the command was transmitted successfully and the EC
> - * replied with success status. It's not necessary to check msg->result when
> - * using this function.
> - *
> - * Return: The number of bytes transferred on success or negative error code.
> - */
> -int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
> - struct cros_ec_command *msg);
> -
> -/**
> - * cros_ec_register() - Register a new ChromeOS EC, using the provided info.
> - * @ec_dev: Device to register.
> - *
> - * Before calling this, allocate a pointer to a new device and then fill
> - * in all the fields up to the --private-- marker.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_register(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_unregister() - Remove a ChromeOS EC.
> - * @ec_dev: Device to unregister.
> - *
> - * Call this to deregister a ChromeOS EC, then clean up any private data.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_unregister(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_query_all() - Query the protocol version supported by the
> - * ChromeOS EC.
> - * @ec_dev: Device to register.
> - *
> - * Return: 0 on success or negative error code.
> - */
> -int cros_ec_query_all(struct cros_ec_device *ec_dev);
> -
> -/**
> - * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC.
> - * @ec_dev: Device to fetch event from.
> - * @wake_event: Pointer to a bool set to true upon return if the event might be
> - * treated as a wake event. Ignored if null.
> - *
> - * Return: negative error code on errors; 0 for no data; or else number of
> - * bytes received (i.e., an event was retrieved successfully). Event types are
> - * written out to @ec_dev->event_data.event_type on success.
> - */
> -int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event);
> -
> -/**
> - * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC.
> - * @ec_dev: Device to fetch event from.
> - *
> - * When MKBP is supported, when the EC raises an interrupt, we collect the
> - * events raised and call the functions in the ec notifier. This function
> - * is a helper to know which events are raised.
> - *
> - * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*.
> - */
> -u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev);
> -
> #endif /* __LINUX_MFD_CROS_EC_H */
> diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
> similarity index 100%
> rename from include/linux/mfd/cros_ec_commands.h
> rename to include/linux/platform_data/cros_ec_commands.h
> diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h
> new file mode 100644
> index 000000000000..34dd9e5c1779
> --- /dev/null
> +++ b/include/linux/platform_data/cros_ec_proto.h
> @@ -0,0 +1,315 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * ChromeOS Embedded Controller protocol interface.
> + *
> + * Copyright (C) 2012 Google, Inc
> + */
> +
> +#ifndef __LINUX_CROS_EC_PROTO_H
> +#define __LINUX_CROS_EC_PROTO_H
> +
> +#include <linux/device.h>
> +#include <linux/mutex.h>
> +#include <linux/notifier.h>
> +
> +#define CROS_EC_DEV_NAME "cros_ec"
> +#define CROS_EC_DEV_FP_NAME "cros_fp"
> +#define CROS_EC_DEV_ISH_NAME "cros_ish"
> +#define CROS_EC_DEV_PD_NAME "cros_pd"
> +#define CROS_EC_DEV_TP_NAME "cros_tp"
> +
> +/*
> + * The EC is unresponsive for a time after a reboot command. Add a
> + * simple delay to make sure that the bus stays locked.
> + */
> +#define EC_REBOOT_DELAY_MS 50
> +
> +/*
> + * Max bus-specific overhead incurred by request/responses.
> + * I2C requires 1 additional byte for requests.
> + * I2C requires 2 additional bytes for responses.
> + * SPI requires up to 32 additional bytes for responses.
> + */
> +#define EC_PROTO_VERSION_UNKNOWN 0
> +#define EC_MAX_REQUEST_OVERHEAD 1
> +#define EC_MAX_RESPONSE_OVERHEAD 32
> +
> +/*
> + * Command interface between EC and AP, for LPC, I2C and SPI interfaces.
> + */
> +enum {
> + EC_MSG_TX_HEADER_BYTES = 3,
> + EC_MSG_TX_TRAILER_BYTES = 1,
> + EC_MSG_TX_PROTO_BYTES = EC_MSG_TX_HEADER_BYTES +
> + EC_MSG_TX_TRAILER_BYTES,
> + EC_MSG_RX_PROTO_BYTES = 3,
> +
> + /* Max length of messages for proto 2*/
> + EC_PROTO2_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE +
> + EC_MSG_TX_PROTO_BYTES,
> +
> + EC_MAX_MSG_BYTES = 64 * 1024,
> +};
> +
> +/**
> + * struct cros_ec_command - Information about a ChromeOS EC command.
> + * @version: Command version number (often 0).
> + * @command: Command to send (EC_CMD_...).
> + * @outsize: Outgoing length in bytes.
> + * @insize: Max number of bytes to accept from the EC.
> + * @result: EC's response to the command (separate from communication failure).
> + * @data: Where to put the incoming data from EC and outgoing data to EC.
> + */
> +struct cros_ec_command {
> + uint32_t version;
> + uint32_t command;
> + uint32_t outsize;
> + uint32_t insize;
> + uint32_t result;
> + uint8_t data[0];
> +};
> +
> +/**
> + * struct cros_ec_device - Information about a ChromeOS EC device.
> + * @phys_name: Name of physical comms layer (e.g. 'i2c-4').
> + * @dev: Device pointer for physical comms device
> + * @was_wake_device: True if this device was set to wake the system from
> + * sleep at the last suspend.
> + * @cros_class: The class structure for this device.
> + * @cmd_readmem: Direct read of the EC memory-mapped region, if supported.
> + * @offset: Is within EC_LPC_ADDR_MEMMAP region.
> + * @bytes: Number of bytes to read. zero means "read a string" (including
> + * the trailing '\0'). At most only EC_MEMMAP_SIZE bytes can be
> + * read. Caller must ensure that the buffer is large enough for the
> + * result when reading a string.
> + * @max_request: Max size of message requested.
> + * @max_response: Max size of message response.
> + * @max_passthru: Max sice of passthru message.
> + * @proto_version: The protocol version used for this device.
> + * @priv: Private data.
> + * @irq: Interrupt to use.
> + * @id: Device id.
> + * @din: Input buffer (for data from EC). This buffer will always be
> + * dword-aligned and include enough space for up to 7 word-alignment
> + * bytes also, so we can ensure that the body of the message is always
> + * dword-aligned (64-bit). We use this alignment to keep ARM and x86
> + * happy. Probably word alignment would be OK, there might be a small
> + * performance advantage to using dword.
> + * @dout: Output buffer (for data to EC). This buffer will always be
> + * dword-aligned and include enough space for up to 7 word-alignment
> + * bytes also, so we can ensure that the body of the message is always
> + * dword-aligned (64-bit). We use this alignment to keep ARM and x86
> + * happy. Probably word alignment would be OK, there might be a small
> + * performance advantage to using dword.
> + * @din_size: Size of din buffer to allocate (zero to use static din).
> + * @dout_size: Size of dout buffer to allocate (zero to use static dout).
> + * @wake_enabled: True if this device can wake the system from sleep.
> + * @suspended: True if this device had been suspended.
> + * @cmd_xfer: Send command to EC and get response.
> + * Returns the number of bytes received if the communication
> + * succeeded, but that doesn't mean the EC was happy with the
> + * command. The caller should check msg.result for the EC's result
> + * code.
> + * @pkt_xfer: Send packet to EC and get response.
> + * @lock: One transaction at a time.
> + * @mkbp_event_supported: True if this EC supports the MKBP event protocol.
> + * @host_sleep_v1: True if this EC supports the sleep v1 command.
> + * @event_notifier: Interrupt event notifier for transport devices.
> + * @event_data: Raw payload transferred with the MKBP event.
> + * @event_size: Size in bytes of the event data.
> + * @host_event_wake_mask: Mask of host events that cause wake from suspend.
> + * @ec: The platform_device used by the mfd driver to interface with the
> + * main EC.
> + * @pd: The platform_device used by the mfd driver to interface with the
> + * PD behind an EC.
> + */
> +struct cros_ec_device {
> + /* These are used by other drivers that want to talk to the EC */
> + const char *phys_name;
> + struct device *dev;
> + bool was_wake_device;
> + struct class *cros_class;
> + int (*cmd_readmem)(struct cros_ec_device *ec, unsigned int offset,
> + unsigned int bytes, void *dest);
> +
> + /* These are used to implement the platform-specific interface */
> + u16 max_request;
> + u16 max_response;
> + u16 max_passthru;
> + u16 proto_version;
> + void *priv;
> + int irq;
> + u8 *din;
> + u8 *dout;
> + int din_size;
> + int dout_size;
> + bool wake_enabled;
> + bool suspended;
> + int (*cmd_xfer)(struct cros_ec_device *ec,
> + struct cros_ec_command *msg);
> + int (*pkt_xfer)(struct cros_ec_device *ec,
> + struct cros_ec_command *msg);
> + struct mutex lock;
> + bool mkbp_event_supported;
> + bool host_sleep_v1;
> + struct blocking_notifier_head event_notifier;
> +
> + struct ec_response_get_next_event_v1 event_data;
> + int event_size;
> + u32 host_event_wake_mask;
> +
> + /* The platform devices used by the mfd driver */
> + struct platform_device *ec;
> + struct platform_device *pd;
> +};
> +
> +/**
> + * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information.
> + * @sensor_num: Id of the sensor, as reported by the EC.
> + */
> +struct cros_ec_sensor_platform {
> + u8 sensor_num;
> +};
> +
> +/**
> + * struct cros_ec_platform - ChromeOS EC platform information.
> + * @ec_name: Name of EC device (e.g. 'cros-ec', 'cros-pd', ...)
> + * used in /dev/ and sysfs.
> + * @cmd_offset: Offset to apply for each command. Set when
> + * registering a device behind another one.
> + */
> +struct cros_ec_platform {
> + const char *ec_name;
> + u16 cmd_offset;
> +};
> +
> +/**
> + * cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device.
> + * @ec_dev: Device to suspend.
> + *
> + * This can be called by drivers to handle a suspend event.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_suspend(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_resume() - Handle a resume operation for the ChromeOS EC device.
> + * @ec_dev: Device to resume.
> + *
> + * This can be called by drivers to handle a resume event.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_resume(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer.
> + * @ec_dev: Device to register.
> + * @msg: Message to write.
> + *
> + * This is intended to be used by all ChromeOS EC drivers, but at present
> + * only SPI uses it. Once LPC uses the same protocol it can start using it.
> + * I2C could use it now, with a refactor of the existing code.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> + * cros_ec_check_result() - Check ec_msg->result.
> + * @ec_dev: EC device.
> + * @msg: Message to check.
> + *
> + * This is used by ChromeOS EC drivers to check the ec_msg->result for
> + * errors and to warn about them.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_check_result(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> + * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC.
> + * @ec_dev: EC device.
> + * @msg: Message to write.
> + *
> + * Call this to send a command to the ChromeOS EC. This should be used
> + * instead of calling the EC's cmd_xfer() callback directly.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> + * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC.
> + * @ec_dev: EC device.
> + * @msg: Message to write.
> + *
> + * This function is identical to cros_ec_cmd_xfer, except it returns success
> + * status only if both the command was transmitted successfully and the EC
> + * replied with success status. It's not necessary to check msg->result when
> + * using this function.
> + *
> + * Return: The number of bytes transferred on success or negative error code.
> + */
> +int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *msg);
> +
> +/**
> + * cros_ec_register() - Register a new ChromeOS EC, using the provided info.
> + * @ec_dev: Device to register.
> + *
> + * Before calling this, allocate a pointer to a new device and then fill
> + * in all the fields up to the --private-- marker.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_register(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_unregister() - Remove a ChromeOS EC.
> + * @ec_dev: Device to unregister.
> + *
> + * Call this to deregister a ChromeOS EC, then clean up any private data.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_unregister(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_query_all() - Query the protocol version supported by the
> + * ChromeOS EC.
> + * @ec_dev: Device to register.
> + *
> + * Return: 0 on success or negative error code.
> + */
> +int cros_ec_query_all(struct cros_ec_device *ec_dev);
> +
> +/**
> + * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC.
> + * @ec_dev: Device to fetch event from.
> + * @wake_event: Pointer to a bool set to true upon return if the event might be
> + * treated as a wake event. Ignored if null.
> + *
> + * Return: negative error code on errors; 0 for no data; or else number of
> + * bytes received (i.e., an event was retrieved successfully). Event types are
> + * written out to @ec_dev->event_data.event_type on success.
> + */
> +int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event);
> +
> +/**
> + * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC.
> + * @ec_dev: Device to fetch event from.
> + *
> + * When MKBP is supported, when the EC raises an interrupt, we collect the
> + * events raised and call the functions in the ec notifier. This function
> + * is a helper to know which events are raised.
> + *
> + * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*.
> + */
> +u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev);
> +
> +#endif /* __LINUX_CROS_EC_PROTO_H */
> diff --git a/sound/soc/codecs/cros_ec_codec.c b/sound/soc/codecs/cros_ec_codec.c
> index 87830ed5ebf4..79bb4081d3c2 100644
> --- a/sound/soc/codecs/cros_ec_codec.c
> +++ b/sound/soc/codecs/cros_ec_codec.c
> @@ -9,9 +9,9 @@
> #include <linux/delay.h>
> #include <linux/device.h>
> #include <linux/kernel.h>
> -#include <linux/mfd/cros_ec.h>
> -#include <linux/mfd/cros_ec_commands.h>
> #include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> #include <linux/platform_device.h>
> #include <sound/pcm.h>
> #include <sound/pcm_params.h>
> --
> 2.20.1
>