2019-06-06 18:45:45

by Oliver Graute

[permalink] [raw]
Subject: [PATCHv3 2/2] ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard

This patch adds DeviceTree Bindings for the i.MX6 UltraLite DART NAND/WIFI

Signed-off-by: Oliver Graute <[email protected]>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts | 209 ++++++++++++++++++++++++
2 files changed, 210 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 5559028..7f03ab5 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -577,6 +577,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
imx6ul-tx6ul-0010.dtb \
imx6ul-tx6ul-0011.dtb \
imx6ul-tx6ul-mainboard.dtb \
+ imx6ul-var-6ulcustomboard.dtb \
imx6ull-14x14-evk.dtb \
imx6ull-colibri-eval-v3.dtb \
imx6ull-colibri-wifi-eval-v3.dtb \
diff --git a/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
new file mode 100644
index 0000000..80b860a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * Support for Variscite DART-6UL Module
+ *
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Copyright (C) 2015-2016 Variscite Ltd. - http://www.variscite.com
+ * Copyright (C) 2018-2019 Oliver Graute <[email protected]>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include "imx6ul-imx6ull-var-dart-common.dtsi"
+
+/ {
+ model = "Variscite i.MX6 UltraLite Carrier-board";
+ compatible = "fsl,6ulcustomboard", "fsl,imx6ul";
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 20000>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ user {
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_BACK>;
+ gpio-key,wakeup;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ d16_led {
+ gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "wm8731audio";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Line", "Line Jack",
+ "Microphone", "Mic Jack";
+ simple-audio-card,routing =
+ "Headphone Jack", "RHPOUT",
+ "Headphone Jack", "LHPOUT",
+ "LLINEIN", "Line Jack",
+ "RLINEIN", "Line Jack",
+ "MICIN", "Mic Bias",
+ "Mic Bias", "Mic Jack";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&sound_master>;
+ simple-audio-card,frame-master = <&sound_master>;
+
+ sound_master: simple-audio-card,cpu {
+ sound-dai = <&sai2>;
+ };
+ };
+};
+
+&can1 {
+ status = "okay";
+};
+
+&can2 {
+ status = "okay";
+};
+
+&gpc {
+ fsl,cpu_pupscr_sw2iso = <0x2>;
+ fsl,cpu_pupscr_sw = <0x1>;
+ fsl,cpu_pdnscr_iso2sw = <0x1>;
+ fsl,cpu_pdnscr_iso = <0x1>;
+ fsl,ldo-bypass = <0>; /* DCDC, ldo-enable */
+};
+
+&fec1 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ phy-handle = <&ethphy0>;
+};
+
+&fec2 {
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ phy-handle = <&ethphy1>;
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ status = "okay";
+};
+
+&i2c2 {
+ clock_frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ wm8731: codec@1a {
+ #sound-dai-cells = <0>;
+ compatible = "wlf,wm8731";
+ reg = <0x1a>;
+ clocks = <&clks IMX6UL_CLK_SAI2>;
+ clock-names = "mclk";
+ };
+
+ touchscreen@38 {
+ compatible = "edt,edt-ft5x06";
+ reg = <0x38>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <4 0>;
+ touchscreen-size-x = <800>;
+ touchscreen-size-y = <480>;
+ touchscreen-inverted-x;
+ touchscreen-inverted-y;
+ };
+
+ rtc@68 {
+ compatible = "dallas,ds1337";
+ reg = <0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rtc>;
+ interrupt-parent = <&gpio5>;
+ interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+ };
+};
+
+&lcdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcdif_dat
+ &pinctrl_lcdif_ctrl>;
+ display = <&display0>;
+ status = "okay";
+
+ display0: display {
+ bits-per-pixel = <16>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency =<35000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <40>;
+ hback-porch = <40>;
+ hsync-len = <48>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ vsync-len = <3>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&usbotg1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbotg2 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog_1>;
+ imx6ul-evk {
+
+ pinctrl_rtc: rtcgrp {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0
+ >;
+ };
+ };
+};
--
2.7.4


2019-06-13 16:55:12

by Shawn Guo

[permalink] [raw]
Subject: Re: [PATCHv3 2/2] ARM: dts: Add support for i.MX6 UltraLite DART Variscite Customboard

On Thu, Jun 06, 2019 at 06:47:02PM +0200, Oliver Graute wrote:
> This patch adds DeviceTree Bindings for the i.MX6 UltraLite DART NAND/WIFI

It's device tree source, not bindings.

>
> Signed-off-by: Oliver Graute <[email protected]>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts | 209 ++++++++++++++++++++++++
> 2 files changed, 210 insertions(+)
> create mode 100644 arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 5559028..7f03ab5 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -577,6 +577,7 @@ dtb-$(CONFIG_SOC_IMX6UL) += \
> imx6ul-tx6ul-0010.dtb \
> imx6ul-tx6ul-0011.dtb \
> imx6ul-tx6ul-mainboard.dtb \
> + imx6ul-var-6ulcustomboard.dtb \
> imx6ull-14x14-evk.dtb \
> imx6ull-colibri-eval-v3.dtb \
> imx6ull-colibri-wifi-eval-v3.dtb \
> diff --git a/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
> new file mode 100644
> index 0000000..80b860a
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6ul-var-6ulcustomboard.dts
> @@ -0,0 +1,209 @@
> +// SPDX-License-Identifier: (GPL-2.0)
> +/*
> + * Support for Variscite DART-6UL Module
> + *
> + * Copyright (C) 2015 Freescale Semiconductor, Inc.
> + * Copyright (C) 2015-2016 Variscite Ltd. - http://www.variscite.com
> + * Copyright (C) 2018-2019 Oliver Graute <[email protected]>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/input/input.h>
> +#include "imx6ul-imx6ull-var-dart-common.dtsi"
> +
> +/ {
> + model = "Variscite i.MX6 UltraLite Carrier-board";
> + compatible = "fsl,6ulcustomboard", "fsl,imx6ul";

The compatible should be documented.

> +
> + backlight {
> + compatible = "pwm-backlight";
> + pwms = <&pwm1 0 20000>;
> + brightness-levels = <0 4 8 16 32 64 128 255>;
> + default-brightness-level = <6>;
> + status = "okay";

Unnecessary 'status'.

> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + user {
> + gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_BACK>;
> + gpio-key,wakeup;
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> +
> + d16_led {

We prefer to use hyphen than underscore in node name.

> + gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "wm8731audio";
> + simple-audio-card,widgets =
> + "Headphone", "Headphone Jack",
> + "Line", "Line Jack",
> + "Microphone", "Mic Jack";
> + simple-audio-card,routing =
> + "Headphone Jack", "RHPOUT",
> + "Headphone Jack", "LHPOUT",
> + "LLINEIN", "Line Jack",
> + "RLINEIN", "Line Jack",
> + "MICIN", "Mic Bias",
> + "Mic Bias", "Mic Jack";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,bitclock-master = <&sound_master>;
> + simple-audio-card,frame-master = <&sound_master>;
> +
> + sound_master: simple-audio-card,cpu {
> + sound-dai = <&sai2>;
> + };
> + };
> +};
> +
> +&can1 {
> + status = "okay";
> +};
> +
> +&can2 {
> + status = "okay";
> +};
> +
> +&gpc {
> + fsl,cpu_pupscr_sw2iso = <0x2>;
> + fsl,cpu_pupscr_sw = <0x1>;
> + fsl,cpu_pdnscr_iso2sw = <0x1>;
> + fsl,cpu_pdnscr_iso = <0x1>;
> + fsl,ldo-bypass = <0>; /* DCDC, ldo-enable */

All these are bindings from vendor tree?

> +};
> +
> +&fec1 {
> + status = "okay";

We prefer to put 'status' at the end of property list.

> + phy-mode = "rgmii";
> + phy-reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
> + phy-handle = <&ethphy0>;
> +};
> +
> +&fec2 {
> + status = "okay";
> + phy-mode = "rgmii";
> + phy-reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
> + phy-handle = <&ethphy1>;
> +};
> +
> +&i2c1 {
> + clock-frequency = <400000>;
> + status = "okay";
> +};
> +
> +&i2c2 {
> + clock_frequency = <100000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c2>;
> + status = "okay";
> +
> + wm8731: codec@1a {

audio-codec for node name.

> + #sound-dai-cells = <0>;
> + compatible = "wlf,wm8731";
> + reg = <0x1a>;
> + clocks = <&clks IMX6UL_CLK_SAI2>;
> + clock-names = "mclk";
> + };
> +
> + touchscreen@38 {
> + compatible = "edt,edt-ft5x06";
> + reg = <0x38>;
> + interrupt-parent = <&gpio3>;
> + interrupts = <4 0>;
> + touchscreen-size-x = <800>;
> + touchscreen-size-y = <480>;
> + touchscreen-inverted-x;
> + touchscreen-inverted-y;
> + };
> +
> + rtc@68 {
> + compatible = "dallas,ds1337";
> + reg = <0x68>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rtc>;
> + interrupt-parent = <&gpio5>;
> + interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
> + };
> +};
> +
> +&lcdif {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_lcdif_dat
> + &pinctrl_lcdif_ctrl>;
> + display = <&display0>;
> + status = "okay";
> +
> + display0: display {

Have a look at:

https://www.spinics.net/lists/arm-kernel/msg727550.html

Also, can we use new bindings documented in bindings/display/mxsfb.txt?

> + bits-per-pixel = <16>;
> + bus-width = <24>;
> +
> + display-timings {
> + native-mode = <&timing0>;
> + timing0: timing0 {
> + clock-frequency =<35000000>;
> + hactive = <800>;
> + vactive = <480>;
> + hfront-porch = <40>;
> + hback-porch = <40>;
> + hsync-len = <48>;
> + vback-porch = <29>;
> + vfront-porch = <13>;
> + vsync-len = <3>;
> + hsync-active = <0>;
> + vsync-active = <0>;
> + de-active = <1>;
> + pixelclk-active = <0>;
> + };
> + };
> + };
> +};
> +
> +&pwm1 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart3 {
> + status = "okay";
> +};
> +
> +&usbotg1 {
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&usbotg2 {
> + dr_mode = "host";
> + status = "okay";
> +};
> +
> +&iomuxc {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_hog_1>;

Isn't imx6ul-imx6ull-var-dart-common.dtsi already having these them?

> + imx6ul-evk {
> +

This container node shouldn't be needed.

Shawn

> + pinctrl_rtc: rtcgrp {
> + fsl,pins = <
> + MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0
> + >;
> + };
> + };
> +};
> --
> 2.7.4
>