2019-06-11 05:51:46

by Andy Tang

Subject: [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node

Add nxp sa56004 chip node for temperature monitor.

Signed-off-by: Yuantian Tang <[email protected]>
---
v3:
- sort the node in i2c address
v2:
- change the node name and add vcc-supply
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 15 +++++++++++++++
arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 15 +++++++++++++++
2 files changed, 30 insertions(+), 0 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index b359068..960daf2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -47,6 +47,15 @@
regulator-always-on;
};

+ sb_3v3: regulator-sb3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -117,6 +126,12 @@
#size-cells = <0>;
reg = <0x3>;

+ temperature-sensor@4c {
+ compatible = "nxp,sa56004";
+ reg = <0x4c>;
+ vcc-supply = <&sb_3v3>;
+ };
+
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index f9c272f..6a22423 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -43,6 +43,15 @@
regulator-always-on;
};

+ sb_3v3: regulator-sb3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,format = "i2s";
@@ -115,6 +124,12 @@
#size-cells = <0>;
reg = <0x3>;

+ temperature-sensor@4c {
+ compatible = "nxp,sa56004";
+ reg = <0x4c>;
+ vcc-supply = <&sb_3v3>;
+ };
+
rtc@51 {
compatible = "nxp,pcf2129";
reg = <0x51>;
--
1.7.1

2019-06-13 16:55:58

by Shawn Guo

Subject: Re: [PATCH v3] arm64: dts: ls1028a: Add temperature sensor node

On Tue, Jun 11, 2019 at 01:42:44PM +0800, Yuantian Tang wrote:
> Add nxp sa56004 chip node for temperature monitor.
>
> Signed-off-by: Yuantian Tang <[email protected]>

Applied, thanks.