2019-06-13 16:51:56

by Anson Huang

Subject: [PATCH 2/6] ARM: dts: imx6sx: Enable SNVS power key according to board design

From: Anson Huang <[email protected]>

The SNVS power key depends on board design, by default it should
be disabled in SoC DT and ONLY be enabled on board DT if it is
wired up.

Signed-off-by: Anson Huang <[email protected]>
---
arch/arm/boot/dts/imx6sx-sdb-reva.dts | 4 ++++
arch/arm/boot/dts/imx6sx-sdb.dts | 4 ++++
arch/arm/boot/dts/imx6sx.dtsi | 1 +
3 files changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index 5b3d6c10..f1830ed 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -166,3 +166,7 @@
&reg_vdd2p5 {
vin-supply = <&vgen6_reg>;
};
+
+&snvs_pwrkey {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 10f6da8..a8ee708 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -153,3 +153,7 @@
/* Transceiver EN/STBY is active low on RevB board */
gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
};
+
+&snvs_pwrkey {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index bbdfdd8..bb25add 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -738,6 +738,7 @@
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
linux,keycode = <KEY_POWER>;
wakeup-source;
+ status = "disabled";
};
};

--
2.7.4