Because of PHYLINK conversion we stopped parsing the phy-handle property
from DT. Unfortunatelly, some wrapper drivers still rely on this phy
node to configure the PHY.
Let's restore the parsing of PHY handle while these wrapper drivers are
not fully converted to PHYLINK.
Reported-by: Corentin Labbe <[email protected]>
Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic")
Signed-off-by: Jose Abreu <[email protected]>
Cc: Joao Pinto <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: Giuseppe Cavallaro <[email protected]>
Cc: Alexandre Torgue <[email protected]>
---
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 ++--
drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 9 ++++++++-
include/linux/stmmac.h | 1 +
3 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index ad007d8bf9d7..069951590018 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -958,7 +958,7 @@ static int stmmac_init_phy(struct net_device *dev)
struct device_node *node;
int ret;
- node = priv->plat->phy_node;
+ node = priv->plat->phylink_node;
if (node) {
ret = phylink_of_phy_connect(priv->phylink, node, 0);
@@ -980,7 +980,7 @@ static int stmmac_init_phy(struct net_device *dev)
static int stmmac_phy_setup(struct stmmac_priv *priv)
{
- struct device_node *node = priv->plat->phy_node;
+ struct device_node *node = priv->plat->phylink_node;
int mode = priv->plat->interface;
struct phylink *phylink;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 898f94aced53..49adda9b0ad8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -381,7 +381,13 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
*mac = of_get_mac_address(np);
plat->interface = of_get_phy_mode(np);
- plat->phy_node = np;
+
+ /* Some wrapper drivers still rely on phy_node. Let's save it while
+ * they are not converted to phylink. */
+ plat->phy_node = of_parse_phandle(np, "phy-handle", 0);
+
+ /* PHYLINK automatically parses the phy-handle property */
+ plat->phylink_node = np;
/* Get max speed of operation from device tree */
if (of_property_read_u32(np, "max-speed", &plat->max_speed))
@@ -577,6 +583,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac)
void stmmac_remove_config_dt(struct platform_device *pdev,
struct plat_stmmacenet_data *plat)
{
+ of_node_put(plat->phy_node);
of_node_put(plat->mdio_node);
}
#else
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index 4335bd771ce5..1250e737f320 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -151,6 +151,7 @@ struct plat_stmmacenet_data {
int interface;
struct stmmac_mdio_bus_data *mdio_bus_data;
struct device_node *phy_node;
+ struct device_node *phylink_node;
struct device_node *mdio_node;
struct stmmac_dma_cfg *dma_cfg;
int clk_csr;
--
2.7.4
On Fri, Jun 14, 2019 at 05:06:57PM +0200, Jose Abreu wrote:
> Because of PHYLINK conversion we stopped parsing the phy-handle property
> from DT. Unfortunatelly, some wrapper drivers still rely on this phy
> node to configure the PHY.
>
> Let's restore the parsing of PHY handle while these wrapper drivers are
> not fully converted to PHYLINK.
>
> Reported-by: Corentin Labbe <[email protected]>
> Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic")
> Signed-off-by: Jose Abreu <[email protected]>
> Cc: Joao Pinto <[email protected]>
> Cc: David S. Miller <[email protected]>
> Cc: Giuseppe Cavallaro <[email protected]>
> Cc: Alexandre Torgue <[email protected]>
Thanks for the quick fix
Tested-by: Corentin Labbe <[email protected]>
From: Jose Abreu <[email protected]>
Date: Fri, 14 Jun 2019 17:06:57 +0200
> Because of PHYLINK conversion we stopped parsing the phy-handle property
> from DT. Unfortunatelly, some wrapper drivers still rely on this phy
> node to configure the PHY.
>
> Let's restore the parsing of PHY handle while these wrapper drivers are
> not fully converted to PHYLINK.
>
> Reported-by: Corentin Labbe <[email protected]>
> Fixes: 74371272f97f ("net: stmmac: Convert to phylink and remove phylib logic")
> Signed-off-by: Jose Abreu <[email protected]>
Applied, thanks.