This is the start of the stable review cycle for the 4.14.128 release.
There are 53 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Wed 19 Jun 2019 09:06:21 PM UTC.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.128-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.14.128-rc1
Baruch Siach <[email protected]>
rtc: pcf8523: don't return invalid date when battery is low
Andrey Ryabinin <[email protected]>
x86/kasan: Fix boot with 5-level paging and KASAN
Borislav Petkov <[email protected]>
x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback
Borislav Petkov <[email protected]>
RAS/CEC: Fix binary search function
Daniele Palmas <[email protected]>
USB: serial: option: add Telit 0x1260 and 0x1261 compositions
Jörgen Storvist <[email protected]>
USB: serial: option: add support for Simcom SIM7500/SIM7600 RNDIS mode
Chris Packham <[email protected]>
USB: serial: pl2303: add Allied Telesis VT-Kit3
Kai-Heng Feng <[email protected]>
USB: usb-storage: Add new ID to ums-realtek
Marco Zatta <[email protected]>
USB: Fix chipmunk-like voice when using Logitech C270 for recording audio.
Douglas Anderson <[email protected]>
usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression)
Martin Schiller <[email protected]>
usb: dwc2: Fix DMA cache alignment issues
Murray McAllister <[email protected]>
drm/vmwgfx: NULL pointer dereference from vmw_cmd_dx_view_define()
Murray McAllister <[email protected]>
drm/vmwgfx: integer underflow in vmw_cmd_dx_set_shader() leading to an invalid read
Christian Borntraeger <[email protected]>
KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION
Paolo Bonzini <[email protected]>
KVM: x86/pmu: do not mask the value that is written to fixed PMUs
Bernd Eckstein <[email protected]>
usbnet: ipheth: fix racing condition
Kees Cook <[email protected]>
selftests/timers: Add missing fflush(stdout) calls
Qian Cai <[email protected]>
libnvdimm: Fix compilation warnings with W=1
Colin Ian King <[email protected]>
scsi: bnx2fc: fix incorrect cast to u64 on shift operation
Steffen Dirkwinkel <[email protected]>
platform/x86: pmc_atom: Add several Beckhoff Automation boards to critclk_systems DMI table
Hans de Goede <[email protected]>
platform/x86: pmc_atom: Add Lex 3I380D industrial PC to critclk_systems DMI table
Christoph Hellwig <[email protected]>
nvme: remove the ifdef around nvme_nvm_ioctl
Mark Rutland <[email protected]>
arm64/mm: Inhibit huge-vmap with ptdump
James Smart <[email protected]>
scsi: lpfc: add check for loss of ndlp when sending RRQ
YueHaibing <[email protected]>
scsi: qedi: remove set but not used variables 'cdev' and 'udev'
YueHaibing <[email protected]>
scsi: qedi: remove memset/memcpy to nfunc and use func instead
Young Xiao <[email protected]>
Drivers: misc: fix out-of-bounds access in function param_set_kgdbts_var
Vasily Gorbik <[email protected]>
s390/kasan: fix strncpy_from_user kasan checks
Takashi Iwai <[email protected]>
Revert "ALSA: seq: Protect in-kernel ioctl calls with mutex"
Takashi Iwai <[email protected]>
ALSA: seq: Fix race of get-subscription call vs port-delete ioctls
Takashi Iwai <[email protected]>
ALSA: seq: Protect in-kernel ioctl calls with mutex
Peter Zijlstra <[email protected]>
x86/uaccess, kcov: Disable stack protector
Ville Syrjälä <[email protected]>
drm/i915/sdvo: Implement proper HDMI audio support for SDVO
S.j. Wang <[email protected]>
ASoC: fsl_asrc: Fix the issue about unsupported rate
S.j. Wang <[email protected]>
ASoC: cs42xx8: Add regcache mask dirty
Tejun Heo <[email protected]>
cgroup: Use css_tryget() instead of css_tryget_online() in task_get_css()
Coly Li <[email protected]>
bcache: fix stack corruption by PRECEDING_KEY()
Russell King <[email protected]>
i2c: acorn: fix i2c warning
Robin Murphy <[email protected]>
iommu/arm-smmu: Avoid constant zero in TLBI writes
Hans Verkuil <[email protected]>
media: v4l2-ioctl: clear fields in s_parm
Jann Horn <[email protected]>
ptrace: restore smp_rmb() in __ptrace_may_access()
Eric W. Biederman <[email protected]>
signal/ptrace: Don't leak unitialized kernel memory with PTRACE_PEEK_SIGINFO
Minchan Kim <[email protected]>
mm/vmscan.c: fix trying to reclaim unevictable LRU page
Wengang Wang <[email protected]>
fs/ocfs2: fix race in ocfs2_dentry_attach_lock()
Shakeel Butt <[email protected]>
mm/list_lru.c: fix memory leak in __memcg_init_list_lru_node
Hans de Goede <[email protected]>
libata: Extend quirks for the ST1000LM024 drives with NOLPM quirk
Takashi Sakamoto <[email protected]>
ALSA: firewire-motu: fix destruction of data for isochronous resources
Kailang Yang <[email protected]>
ALSA: hda/realtek - Update headset mode for ALC256
Takashi Sakamoto <[email protected]>
ALSA: oxfw: allow PCM capture for Stanton SCS.1m
Jason Gerecke <[email protected]>
HID: wacom: Sync INTUOSP2_BT touch state after each frame if necessary
Jason Gerecke <[email protected]>
HID: wacom: Correct button numbering 2nd-gen Intuos Pro over Bluetooth
Thomas Backlund <[email protected]>
nouveau: Fix build with CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT disabled
Dave Airlie <[email protected]>
drm/nouveau: add kconfig option to turn off nouveau legacy contexts. (v3)
-------------
Diffstat:
Makefile | 4 +-
arch/arm64/mm/mmu.c | 11 +++-
arch/s390/include/asm/uaccess.h | 2 +
arch/s390/kvm/kvm-s390.c | 35 +++++++-----
arch/x86/kernel/cpu/microcode/core.c | 2 +-
arch/x86/kvm/pmu_intel.c | 13 +++--
arch/x86/mm/kasan_init_64.c | 2 +-
drivers/ata/libata-core.c | 9 ++-
drivers/gpu/drm/i915/intel_sdvo.c | 58 +++++++++++++++----
drivers/gpu/drm/i915/intel_sdvo_regs.h | 3 +
drivers/gpu/drm/nouveau/Kconfig | 13 ++++-
drivers/gpu/drm/nouveau/nouveau_drm.c | 7 ++-
drivers/gpu/drm/nouveau/nouveau_ttm.c | 4 ++
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 7 ++-
drivers/hid/wacom_wac.c | 21 +++++--
drivers/i2c/busses/i2c-acorn.c | 1 +
drivers/iommu/arm-smmu.c | 15 ++++-
drivers/md/bcache/bset.c | 16 +++++-
drivers/md/bcache/bset.h | 34 ++++++-----
drivers/media/v4l2-core/v4l2-ioctl.c | 17 +++++-
drivers/misc/kgdbts.c | 4 +-
drivers/net/usb/ipheth.c | 3 +-
drivers/nvdimm/bus.c | 4 +-
drivers/nvdimm/label.c | 2 +
drivers/nvdimm/label.h | 2 -
drivers/nvme/host/core.c | 2 -
drivers/platform/x86/pmc_atom.c | 33 +++++++++++
drivers/ras/cec.c | 34 ++++++-----
drivers/rtc/rtc-pcf8523.c | 32 ++++++++---
drivers/scsi/bnx2fc/bnx2fc_hwi.c | 2 +-
drivers/scsi/lpfc/lpfc_els.c | 5 +-
drivers/scsi/qedi/qedi_dbg.c | 32 +++--------
drivers/scsi/qedi/qedi_iscsi.c | 4 --
drivers/usb/core/quirks.c | 3 +
drivers/usb/dwc2/hcd.c | 39 ++++++++-----
drivers/usb/dwc2/hcd.h | 20 ++++---
drivers/usb/dwc2/hcd_intr.c | 5 +-
drivers/usb/dwc2/hcd_queue.c | 10 ++--
drivers/usb/serial/option.c | 6 ++
drivers/usb/serial/pl2303.c | 1 +
drivers/usb/serial/pl2303.h | 3 +
drivers/usb/storage/unusual_realtek.h | 5 ++
fs/ocfs2/dcache.c | 12 ++++
include/linux/cgroup.h | 10 +++-
include/linux/cpuhotplug.h | 1 +
kernel/Makefile | 1 +
kernel/cred.c | 9 +++
kernel/ptrace.c | 20 ++++++-
mm/list_lru.c | 2 +-
mm/vmscan.c | 2 +-
sound/core/seq/seq_clientmgr.c | 10 +---
sound/core/seq/seq_ports.c | 13 +++--
sound/core/seq/seq_ports.h | 5 +-
sound/firewire/motu/motu-stream.c | 2 +-
sound/firewire/oxfw/oxfw.c | 3 -
sound/pci/hda/patch_realtek.c | 75 ++++++++++++++++++++-----
sound/soc/codecs/cs42xx8.c | 1 +
sound/soc/fsl/fsl_asrc.c | 4 +-
tools/testing/selftests/timers/adjtick.c | 1 +
tools/testing/selftests/timers/leapcrash.c | 1 +
tools/testing/selftests/timers/mqueue-lat.c | 1 +
tools/testing/selftests/timers/nanosleep.c | 1 +
tools/testing/selftests/timers/nsleep-lat.c | 1 +
tools/testing/selftests/timers/raw_skew.c | 1 +
tools/testing/selftests/timers/set-tai.c | 1 +
tools/testing/selftests/timers/set-tz.c | 2 +
tools/testing/selftests/timers/threadtest.c | 1 +
tools/testing/selftests/timers/valid-adjtimex.c | 2 +
68 files changed, 503 insertions(+), 204 deletions(-)
[ Upstream commit 3d0818f5eba80fbe4c0addbfe6ddb2d19dc82cd4 ]
The Lex 3I380D industrial PC has 4 ethernet controllers on board
which need pmc_plt_clk0 - 3 to function, add it to the critclk_systems
DMI table, so that drivers/clk/x86/clk-pmc-atom.c will mark the clocks
as CLK_CRITICAL and they will not get turned off.
Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reported-and-tested-by: Semyon Verchenko <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Acked-by: Andy Shevchenko <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/pmc_atom.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/platform/x86/pmc_atom.c b/drivers/platform/x86/pmc_atom.c
index 50f2a125cd2c..e3e1f83a2dd7 100644
--- a/drivers/platform/x86/pmc_atom.c
+++ b/drivers/platform/x86/pmc_atom.c
@@ -428,12 +428,21 @@ static int pmc_dbgfs_register(struct pmc_dev *pmc)
*/
static const struct dmi_system_id critclk_systems[] = {
{
+ /* pmc_plt_clk0 is used for an external HSIC USB HUB */
.ident = "MPL CEC1x",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "MPL AG"),
DMI_MATCH(DMI_PRODUCT_NAME, "CEC10 Family"),
},
},
+ {
+ /* pmc_plt_clk0 - 3 are used for the 4 ethernet controllers */
+ .ident = "Lex 3I380D",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Lex BayTrail"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "3I380D"),
+ },
+ },
{ /*sentinel*/ }
};
--
2.20.1
[ Upstream commit d0c0d902339249c75da85fd9257a86cbb98dfaa5 ]
Currently an int is being shifted and the result is being cast to a u64
which leads to undefined behaviour if the shift is more than 31 bits. Fix
this by casting the integer value 1 to u64 before the shift operation.
Addresses-Coverity: ("Bad shift operation")
Fixes: 7b594769120b ("[SCSI] bnx2fc: Handle REC_TOV error code from firmware")
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Saurav Kashyap <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/bnx2fc/bnx2fc_hwi.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/bnx2fc/bnx2fc_hwi.c b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
index 26de61d65a4d..1bdff75ae903 100644
--- a/drivers/scsi/bnx2fc/bnx2fc_hwi.c
+++ b/drivers/scsi/bnx2fc/bnx2fc_hwi.c
@@ -830,7 +830,7 @@ ret_err_rqe:
((u64)err_entry->data.err_warn_bitmap_hi << 32) |
(u64)err_entry->data.err_warn_bitmap_lo;
for (i = 0; i < BNX2FC_NUM_ERR_BITS; i++) {
- if (err_warn_bit_map & (u64) (1 << i)) {
+ if (err_warn_bit_map & ((u64)1 << i)) {
err_warn = i;
break;
}
--
2.20.1
From: Dave Airlie <[email protected]>
commit b30a43ac7132cdda833ac4b13dd1ebd35ace14b7 upstream.
There was a nouveau DDX that relied on legacy context ioctls to work,
but we fixed it years ago, give distros that have a modern DDX the
option to break the uAPI and close the mess of holes that legacy
context support is.
Full context of the story:
commit 0e975980d435d58df2d430d688b8c18778b42218
Author: Peter Antoine <[email protected]>
Date: Tue Jun 23 08:18:49 2015 +0100
drm: Turn off Legacy Context Functions
The context functions are not used by the i915 driver and should not
be used by modeset drivers. These driver functions contain several bugs
and security holes. This change makes these functions optional can be
turned on by a setting, they are turned off by default for modeset
driver with the exception of the nouvea driver that may require them with
an old version of libdrm.
The previous attempt was
commit 7c510133d93dd6f15ca040733ba7b2891ed61fd1
Author: Daniel Vetter <[email protected]>
Date: Thu Aug 8 15:41:21 2013 +0200
drm: mark context support as a legacy subsystem
but this had to be reverted
commit c21eb21cb50d58e7cbdcb8b9e7ff68b85cfa5095
Author: Dave Airlie <[email protected]>
Date: Fri Sep 20 08:32:59 2013 +1000
Revert "drm: mark context support as a legacy subsystem"
v2: remove returns from void function, and formatting (Daniel Vetter)
v3:
- s/Nova/nouveau/ in the commit message, and add references to the
previous attempts
- drop the part touching the drm hw lock, that should be a separate
patch.
Signed-off-by: Peter Antoine <[email protected]> (v2)
Cc: Peter Antoine <[email protected]> (v2)
Reviewed-by: Peter Antoine <[email protected]>
Signed-off-by: Daniel Vetter <[email protected]>
v2: move DRM_VM dependency into legacy config.
v3: fix missing dep (kbuild robot)
Cc: [email protected]
Reviewed-by: Daniel Vetter <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/nouveau/Kconfig | 13 ++++++++++++-
drivers/gpu/drm/nouveau/nouveau_drm.c | 7 +++++--
2 files changed, 17 insertions(+), 3 deletions(-)
--- a/drivers/gpu/drm/nouveau/Kconfig
+++ b/drivers/gpu/drm/nouveau/Kconfig
@@ -16,10 +16,21 @@ config DRM_NOUVEAU
select INPUT if ACPI && X86
select THERMAL if ACPI && X86
select ACPI_VIDEO if ACPI && X86
- select DRM_VM
help
Choose this option for open-source NVIDIA support.
+config NOUVEAU_LEGACY_CTX_SUPPORT
+ bool "Nouveau legacy context support"
+ depends on DRM_NOUVEAU
+ select DRM_VM
+ default y
+ help
+ There was a version of the nouveau DDX that relied on legacy
+ ctx ioctls not erroring out. But that was back in time a long
+ ways, so offer a way to disable it now. For uapi compat with
+ old nouveau ddx this should be on by default, but modern distros
+ should consider turning it off.
+
config NOUVEAU_PLATFORM_DRIVER
bool "Nouveau (NVIDIA) SoC GPUs"
depends on DRM_NOUVEAU && ARCH_TEGRA
--- a/drivers/gpu/drm/nouveau/nouveau_drm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_drm.c
@@ -967,8 +967,11 @@ nouveau_driver_fops = {
static struct drm_driver
driver_stub = {
.driver_features =
- DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME | DRIVER_RENDER |
- DRIVER_KMS_LEGACY_CONTEXT,
+ DRIVER_GEM | DRIVER_MODESET | DRIVER_PRIME | DRIVER_RENDER
+#if defined(CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT)
+ | DRIVER_KMS_LEGACY_CONTEXT
+#endif
+ ,
.load = nouveau_drm_load,
.unload = nouveau_drm_unload,
From: Wengang Wang <[email protected]>
commit be99ca2716972a712cde46092c54dee5e6192bf8 upstream.
ocfs2_dentry_attach_lock() can be executed in parallel threads against the
same dentry. Make that race safe. The race is like this:
thread A thread B
(A1) enter ocfs2_dentry_attach_lock,
seeing dentry->d_fsdata is NULL,
and no alias found by
ocfs2_find_local_alias, so kmalloc
a new ocfs2_dentry_lock structure
to local variable "dl", dl1
.....
(B1) enter ocfs2_dentry_attach_lock,
seeing dentry->d_fsdata is NULL,
and no alias found by
ocfs2_find_local_alias so kmalloc
a new ocfs2_dentry_lock structure
to local variable "dl", dl2.
......
(A2) set dentry->d_fsdata with dl1,
call ocfs2_dentry_lock() and increase
dl1->dl_lockres.l_ro_holders to 1 on
success.
......
(B2) set dentry->d_fsdata with dl2
call ocfs2_dentry_lock() and increase
dl2->dl_lockres.l_ro_holders to 1 on
success.
......
(A3) call ocfs2_dentry_unlock()
and decrease
dl2->dl_lockres.l_ro_holders to 0
on success.
....
(B3) call ocfs2_dentry_unlock(),
decreasing
dl2->dl_lockres.l_ro_holders, but
see it's zero now, panic
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Wengang Wang <[email protected]>
Reported-by: Daniel Sobe <[email protected]>
Tested-by: Daniel Sobe <[email protected]>
Reviewed-by: Changwei Ge <[email protected]>
Reviewed-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Junxiao Bi <[email protected]>
Cc: Gang He <[email protected]>
Cc: Jun Piao <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/ocfs2/dcache.c | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/fs/ocfs2/dcache.c
+++ b/fs/ocfs2/dcache.c
@@ -310,6 +310,18 @@ int ocfs2_dentry_attach_lock(struct dent
out_attach:
spin_lock(&dentry_attach_lock);
+ if (unlikely(dentry->d_fsdata && !alias)) {
+ /* d_fsdata is set by a racing thread which is doing
+ * the same thing as this thread is doing. Leave the racing
+ * thread going ahead and we return here.
+ */
+ spin_unlock(&dentry_attach_lock);
+ iput(dl->dl_inode);
+ ocfs2_lock_res_free(&dl->dl_lockres);
+ kfree(dl);
+ return 0;
+ }
+
dentry->d_fsdata = dl;
dl->dl_count++;
spin_unlock(&dentry_attach_lock);
[ Upstream commit 19ec166c3f39fe1d3789888a74cc95544ac266d4 ]
kselftests exposed a problem in the s390 handling for memory slots.
Right now we only do proper memory slot handling for creation of new
memory slots. Neither MOVE, nor DELETION are handled properly. Let us
implement those.
Signed-off-by: Christian Borntraeger <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/kvm/kvm-s390.c | 35 +++++++++++++++++++++--------------
1 file changed, 21 insertions(+), 14 deletions(-)
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index d6fe229ac20e..70a446ec347d 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -3913,21 +3913,28 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
const struct kvm_memory_slot *new,
enum kvm_mr_change change)
{
- int rc;
-
- /* If the basics of the memslot do not change, we do not want
- * to update the gmap. Every update causes several unnecessary
- * segment translation exceptions. This is usually handled just
- * fine by the normal fault handler + gmap, but it will also
- * cause faults on the prefix page of running guest CPUs.
- */
- if (old->userspace_addr == mem->userspace_addr &&
- old->base_gfn * PAGE_SIZE == mem->guest_phys_addr &&
- old->npages * PAGE_SIZE == mem->memory_size)
- return;
+ int rc = 0;
- rc = gmap_map_segment(kvm->arch.gmap, mem->userspace_addr,
- mem->guest_phys_addr, mem->memory_size);
+ switch (change) {
+ case KVM_MR_DELETE:
+ rc = gmap_unmap_segment(kvm->arch.gmap, old->base_gfn * PAGE_SIZE,
+ old->npages * PAGE_SIZE);
+ break;
+ case KVM_MR_MOVE:
+ rc = gmap_unmap_segment(kvm->arch.gmap, old->base_gfn * PAGE_SIZE,
+ old->npages * PAGE_SIZE);
+ if (rc)
+ break;
+ /* FALLTHROUGH */
+ case KVM_MR_CREATE:
+ rc = gmap_map_segment(kvm->arch.gmap, mem->userspace_addr,
+ mem->guest_phys_addr, mem->memory_size);
+ break;
+ case KVM_MR_FLAGS_ONLY:
+ break;
+ default:
+ WARN(1, "Unknown KVM MR CHANGE: %d\n", change);
+ }
if (rc)
pr_warn("failed to commit memory region\n");
return;
--
2.20.1
From: Minchan Kim <[email protected]>
commit a58f2cef26e1ca44182c8b22f4f4395e702a5795 upstream.
There was the below bug report from Wu Fangsuo.
On the CMA allocation path, isolate_migratepages_range() could isolate
unevictable LRU pages and reclaim_clean_page_from_list() can try to
reclaim them if they are clean file-backed pages.
page:ffffffbf02f33b40 count:86 mapcount:84 mapping:ffffffc08fa7a810 index:0x24
flags: 0x19040c(referenced|uptodate|arch_1|mappedtodisk|unevictable|mlocked)
raw: 000000000019040c ffffffc08fa7a810 0000000000000024 0000005600000053
raw: ffffffc009b05b20 ffffffc009b05b20 0000000000000000 ffffffc09bf3ee80
page dumped because: VM_BUG_ON_PAGE(PageLRU(page) || PageUnevictable(page))
page->mem_cgroup:ffffffc09bf3ee80
------------[ cut here ]------------
kernel BUG at /home/build/farmland/adroid9.0/kernel/linux/mm/vmscan.c:1350!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 7125 Comm: syz-executor Tainted: G S 4.14.81 #3
Hardware name: ASR AQUILAC EVB (DT)
task: ffffffc00a54cd00 task.stack: ffffffc009b00000
PC is at shrink_page_list+0x1998/0x3240
LR is at shrink_page_list+0x1998/0x3240
pc : [<ffffff90083a2158>] lr : [<ffffff90083a2158>] pstate: 60400045
sp : ffffffc009b05940
..
shrink_page_list+0x1998/0x3240
reclaim_clean_pages_from_list+0x3c0/0x4f0
alloc_contig_range+0x3bc/0x650
cma_alloc+0x214/0x668
ion_cma_allocate+0x98/0x1d8
ion_alloc+0x200/0x7e0
ion_ioctl+0x18c/0x378
do_vfs_ioctl+0x17c/0x1780
SyS_ioctl+0xac/0xc0
Wu found it's due to commit ad6b67041a45 ("mm: remove SWAP_MLOCK in
ttu"). Before that, unevictable pages go to cull_mlocked so that we
can't reach the VM_BUG_ON_PAGE line.
To fix the issue, this patch filters out unevictable LRU pages from the
reclaim_clean_pages_from_list in CMA.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: ad6b67041a45 ("mm: remove SWAP_MLOCK in ttu")
Signed-off-by: Minchan Kim <[email protected]>
Reported-by: Wu Fangsuo <[email protected]>
Debugged-by: Wu Fangsuo <[email protected]>
Tested-by: Wu Fangsuo <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Cc: Pankaj Suryawanshi <[email protected]>
Cc: <[email protected]> [4.12+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/vmscan.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1393,7 +1393,7 @@ unsigned long reclaim_clean_pages_from_l
list_for_each_entry_safe(page, next, page_list, lru) {
if (page_is_file_cache(page) && !PageDirty(page) &&
- !__PageMovable(page)) {
+ !__PageMovable(page) && !PageUnevictable(page)) {
ClearPageActive(page);
list_move(&page->lru, &clean_pages);
}
From: Robin Murphy <[email protected]>
commit 4e4abae311e4b44aaf61f18a826fd7136037f199 upstream.
Apparently, some Qualcomm arm64 platforms which appear to expose their
SMMU global register space are still, in fact, using a hypervisor to
mediate it by trapping and emulating register accesses. Sadly, some
deployed versions of said trapping code have bugs wherein they go
horribly wrong for stores using r31 (i.e. XZR/WZR) as the source
register.
While this can be mitigated for GCC today by tweaking the constraints
for the implementation of writel_relaxed(), to avoid any potential
arms race with future compilers more aggressively optimising register
allocation, the simple way is to just remove all the problematic
constant zeros. For the write-only TLB operations, the actual value is
irrelevant anyway and any old nearby variable will provide a suitable
GPR to encode. The one point at which we really do need a zero to clear
a context bank happens before any of the TLB maintenance where crashes
have been reported, so is apparently not a problem... :/
Reported-by: AngeloGioacchino Del Regno <[email protected]>
Tested-by: Marc Gonzalez <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Signed-off-by: Marc Gonzalez <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: [email protected]
Signed-off-by: Joerg Roedel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/iommu/arm-smmu.c | 15 ++++++++++++---
1 file changed, 12 insertions(+), 3 deletions(-)
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -56,6 +56,15 @@
#include "io-pgtable.h"
#include "arm-smmu-regs.h"
+/*
+ * Apparently, some Qualcomm arm64 platforms which appear to expose their SMMU
+ * global register space are still, in fact, using a hypervisor to mediate it
+ * by trapping and emulating register accesses. Sadly, some deployed versions
+ * of said trapping code have bugs wherein they go horribly wrong for stores
+ * using r31 (i.e. XZR/WZR) as the source register.
+ */
+#define QCOM_DUMMY_VAL -1
+
#define ARM_MMU500_ACTLR_CPRE (1 << 1)
#define ARM_MMU500_ACR_CACHE_LOCK (1 << 26)
@@ -404,7 +413,7 @@ static void __arm_smmu_tlb_sync(struct a
{
unsigned int spin_cnt, delay;
- writel_relaxed(0, sync);
+ writel_relaxed(QCOM_DUMMY_VAL, sync);
for (delay = 1; delay < TLB_LOOP_TIMEOUT; delay *= 2) {
for (spin_cnt = TLB_SPIN_COUNT; spin_cnt > 0; spin_cnt--) {
if (!(readl_relaxed(status) & sTLBGSTATUS_GSACTIVE))
@@ -1635,8 +1644,8 @@ static void arm_smmu_device_reset(struct
}
/* Invalidate the TLB, just in case */
- writel_relaxed(0, gr0_base + ARM_SMMU_GR0_TLBIALLH);
- writel_relaxed(0, gr0_base + ARM_SMMU_GR0_TLBIALLNSNH);
+ writel_relaxed(QCOM_DUMMY_VAL, gr0_base + ARM_SMMU_GR0_TLBIALLH);
+ writel_relaxed(QCOM_DUMMY_VAL, gr0_base + ARM_SMMU_GR0_TLBIALLNSNH);
reg = readl_relaxed(ARM_SMMU_GR0_NS(smmu) + ARM_SMMU_GR0_sCR0);
From: Hans Verkuil <[email protected]>
commit 8a7c5594c02022ca5fa7fb603e11b3e1feb76ed5 upstream.
Zero the reserved capture/output array.
Zero the extendedmode (it is never used in drivers).
Clear all flags in capture/outputmode except for V4L2_MODE_HIGHQUALITY,
as that is the only valid flag.
Signed-off-by: Hans Verkuil <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Cc: Naresh Kamboju <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/media/v4l2-core/v4l2-ioctl.c | 17 ++++++++++++++++-
1 file changed, 16 insertions(+), 1 deletion(-)
--- a/drivers/media/v4l2-core/v4l2-ioctl.c
+++ b/drivers/media/v4l2-core/v4l2-ioctl.c
@@ -1945,7 +1945,22 @@ static int v4l_s_parm(const struct v4l2_
struct v4l2_streamparm *p = arg;
int ret = check_fmt(file, p->type);
- return ret ? ret : ops->vidioc_s_parm(file, fh, p);
+ if (ret)
+ return ret;
+
+ /* Note: extendedmode is never used in drivers */
+ if (V4L2_TYPE_IS_OUTPUT(p->type)) {
+ memset(p->parm.output.reserved, 0,
+ sizeof(p->parm.output.reserved));
+ p->parm.output.extendedmode = 0;
+ p->parm.output.outputmode &= V4L2_MODE_HIGHQUALITY;
+ } else {
+ memset(p->parm.capture.reserved, 0,
+ sizeof(p->parm.capture.reserved));
+ p->parm.capture.extendedmode = 0;
+ p->parm.capture.capturemode &= V4L2_MODE_HIGHQUALITY;
+ }
+ return ops->vidioc_s_parm(file, fh, p);
}
static int v4l_queryctrl(const struct v4l2_ioctl_ops *ops,
From: Douglas Anderson <[email protected]>
commit babd183915e91a64e976b9e8ab682bb56624df76 upstream.
In commit abb621844f6a ("usb: ch9: make usb_endpoint_maxp() return
only packet size") the API to usb_endpoint_maxp() changed. It used to
just return wMaxPacketSize but after that commit it returned
wMaxPacketSize with the high bits (the multiplier) masked off. If you
wanted to get the multiplier it was now up to your code to call the
new usb_endpoint_maxp_mult() which was introduced in
commit 541b6fe63023 ("usb: add helper to extract bits 12:11 of
wMaxPacketSize").
Prior to the API change most host drivers were updated, but no update
was made to dwc2. Presumably it was assumed that dwc2 was too
simplistic to use the multiplier and thus just didn't support a
certain class of USB devices. However, it turns out that dwc2 did use
the multiplier and many devices using it were working quite nicely.
That means that many USB devices have been broken since the API
change. One such device is a Logitech HD Pro Webcam C920.
Specifically, though dwc2 didn't directly call usb_endpoint_maxp(), it
did call usb_maxpacket() which in turn called usb_endpoint_maxp().
Let's update dwc2 to work properly with the new API.
Fixes: abb621844f6a ("usb: ch9: make usb_endpoint_maxp() return only packet size")
Cc: [email protected]
Acked-by: Minas Harutyunyan <[email protected]>
Reviewed-by: Matthias Kaehlcke <[email protected]>
Signed-off-by: Douglas Anderson <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc2/hcd.c | 29 +++++++++++++++++------------
drivers/usb/dwc2/hcd.h | 20 +++++++++++---------
drivers/usb/dwc2/hcd_intr.c | 5 +++--
drivers/usb/dwc2/hcd_queue.c | 10 ++++++----
4 files changed, 37 insertions(+), 27 deletions(-)
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -2779,7 +2779,7 @@ static int dwc2_assign_and_init_hc(struc
chan->dev_addr = dwc2_hcd_get_dev_addr(&urb->pipe_info);
chan->ep_num = dwc2_hcd_get_ep_num(&urb->pipe_info);
chan->speed = qh->dev_speed;
- chan->max_packet = dwc2_max_packet(qh->maxp);
+ chan->max_packet = qh->maxp;
chan->xfer_started = 0;
chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS;
@@ -2857,7 +2857,7 @@ static int dwc2_assign_and_init_hc(struc
* This value may be modified when the transfer is started
* to reflect the actual transfer length
*/
- chan->multi_count = dwc2_hb_mult(qh->maxp);
+ chan->multi_count = qh->maxp_mult;
if (hsotg->params.dma_desc_enable) {
chan->desc_list_addr = qh->desc_list_dma;
@@ -3956,19 +3956,21 @@ static struct dwc2_hcd_urb *dwc2_hcd_urb
static void dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg *hsotg,
struct dwc2_hcd_urb *urb, u8 dev_addr,
- u8 ep_num, u8 ep_type, u8 ep_dir, u16 mps)
+ u8 ep_num, u8 ep_type, u8 ep_dir,
+ u16 maxp, u16 maxp_mult)
{
if (dbg_perio() ||
ep_type == USB_ENDPOINT_XFER_BULK ||
ep_type == USB_ENDPOINT_XFER_CONTROL)
dev_vdbg(hsotg->dev,
- "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, mps=%d\n",
- dev_addr, ep_num, ep_dir, ep_type, mps);
+ "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, maxp=%d (%d mult)\n",
+ dev_addr, ep_num, ep_dir, ep_type, maxp, maxp_mult);
urb->pipe_info.dev_addr = dev_addr;
urb->pipe_info.ep_num = ep_num;
urb->pipe_info.pipe_type = ep_type;
urb->pipe_info.pipe_dir = ep_dir;
- urb->pipe_info.mps = mps;
+ urb->pipe_info.maxp = maxp;
+ urb->pipe_info.maxp_mult = maxp_mult;
}
/*
@@ -4059,8 +4061,9 @@ void dwc2_hcd_dump_state(struct dwc2_hso
dwc2_hcd_is_pipe_in(&urb->pipe_info) ?
"IN" : "OUT");
dev_dbg(hsotg->dev,
- " Max packet size: %d\n",
- dwc2_hcd_get_mps(&urb->pipe_info));
+ " Max packet size: %d (%d mult)\n",
+ dwc2_hcd_get_maxp(&urb->pipe_info),
+ dwc2_hcd_get_maxp_mult(&urb->pipe_info));
dev_dbg(hsotg->dev,
" transfer_buffer: %p\n",
urb->buf);
@@ -4673,8 +4676,10 @@ static void dwc2_dump_urb_info(struct us
}
dev_vdbg(hsotg->dev, " Speed: %s\n", speed);
- dev_vdbg(hsotg->dev, " Max packet size: %d\n",
- usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
+ dev_vdbg(hsotg->dev, " Max packet size: %d (%d mult)\n",
+ usb_endpoint_maxp(&urb->ep->desc),
+ usb_endpoint_maxp_mult(&urb->ep->desc));
+
dev_vdbg(hsotg->dev, " Data buffer length: %d\n",
urb->transfer_buffer_length);
dev_vdbg(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %08lx\n",
@@ -4757,8 +4762,8 @@ static int _dwc2_hcd_urb_enqueue(struct
dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe),
usb_pipeendpoint(urb->pipe), ep_type,
usb_pipein(urb->pipe),
- usb_maxpacket(urb->dev, urb->pipe,
- !(usb_pipein(urb->pipe))));
+ usb_endpoint_maxp(&ep->desc),
+ usb_endpoint_maxp_mult(&ep->desc));
buf = urb->transfer_buffer;
--- a/drivers/usb/dwc2/hcd.h
+++ b/drivers/usb/dwc2/hcd.h
@@ -170,7 +170,8 @@ struct dwc2_hcd_pipe_info {
u8 ep_num;
u8 pipe_type;
u8 pipe_dir;
- u16 mps;
+ u16 maxp;
+ u16 maxp_mult;
};
struct dwc2_hcd_iso_packet_desc {
@@ -263,6 +264,7 @@ struct dwc2_hs_transfer_time {
* - USB_ENDPOINT_XFER_ISOC
* @ep_is_in: Endpoint direction
* @maxp: Value from wMaxPacketSize field of Endpoint Descriptor
+ * @maxp_mult: Multiplier for maxp
* @dev_speed: Device speed. One of the following values:
* - USB_SPEED_LOW
* - USB_SPEED_FULL
@@ -335,6 +337,7 @@ struct dwc2_qh {
u8 ep_type;
u8 ep_is_in;
u16 maxp;
+ u16 maxp_mult;
u8 dev_speed;
u8 data_toggle;
u8 ping_state;
@@ -489,9 +492,14 @@ static inline u8 dwc2_hcd_get_pipe_type(
return pipe->pipe_type;
}
-static inline u16 dwc2_hcd_get_mps(struct dwc2_hcd_pipe_info *pipe)
+static inline u16 dwc2_hcd_get_maxp(struct dwc2_hcd_pipe_info *pipe)
+{
+ return pipe->maxp;
+}
+
+static inline u16 dwc2_hcd_get_maxp_mult(struct dwc2_hcd_pipe_info *pipe)
{
- return pipe->mps;
+ return pipe->maxp_mult;
}
static inline u8 dwc2_hcd_get_dev_addr(struct dwc2_hcd_pipe_info *pipe)
@@ -606,12 +614,6 @@ static inline bool dbg_urb(struct urb *u
static inline bool dbg_perio(void) { return false; }
#endif
-/* High bandwidth multiplier as encoded in highspeed endpoint descriptors */
-#define dwc2_hb_mult(wmaxpacketsize) (1 + (((wmaxpacketsize) >> 11) & 0x03))
-
-/* Packet size for any kind of endpoint descriptor */
-#define dwc2_max_packet(wmaxpacketsize) ((wmaxpacketsize) & 0x07ff)
-
/*
* Returns true if frame1 index is greater than frame2 index. The comparison
* is done modulo FRLISTEN_64_SIZE. This accounts for the rollover of the
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -1579,8 +1579,9 @@ static void dwc2_hc_ahberr_intr(struct d
dev_err(hsotg->dev, " Speed: %s\n", speed);
- dev_err(hsotg->dev, " Max packet size: %d\n",
- dwc2_hcd_get_mps(&urb->pipe_info));
+ dev_err(hsotg->dev, " Max packet size: %d (mult %d)\n",
+ dwc2_hcd_get_maxp(&urb->pipe_info),
+ dwc2_hcd_get_maxp_mult(&urb->pipe_info));
dev_err(hsotg->dev, " Data buffer length: %d\n", urb->length);
dev_err(hsotg->dev, " Transfer buffer: %p, Transfer DMA: %08lx\n",
urb->buf, (unsigned long)urb->dma);
--- a/drivers/usb/dwc2/hcd_queue.c
+++ b/drivers/usb/dwc2/hcd_queue.c
@@ -703,7 +703,7 @@ static void dwc2_hs_pmap_unschedule(stru
static int dwc2_uframe_schedule_split(struct dwc2_hsotg *hsotg,
struct dwc2_qh *qh)
{
- int bytecount = dwc2_hb_mult(qh->maxp) * dwc2_max_packet(qh->maxp);
+ int bytecount = qh->maxp_mult * qh->maxp;
int ls_search_slice;
int err = 0;
int host_interval_in_sched;
@@ -1327,7 +1327,7 @@ static int dwc2_check_max_xfer_size(stru
u32 max_channel_xfer_size;
int status = 0;
- max_xfer_size = dwc2_max_packet(qh->maxp) * dwc2_hb_mult(qh->maxp);
+ max_xfer_size = qh->maxp * qh->maxp_mult;
max_channel_xfer_size = hsotg->params.max_transfer_size;
if (max_xfer_size > max_channel_xfer_size) {
@@ -1460,8 +1460,9 @@ static void dwc2_qh_init(struct dwc2_hso
u32 prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
bool do_split = (prtspd == HPRT0_SPD_HIGH_SPEED &&
dev_speed != USB_SPEED_HIGH);
- int maxp = dwc2_hcd_get_mps(&urb->pipe_info);
- int bytecount = dwc2_hb_mult(maxp) * dwc2_max_packet(maxp);
+ int maxp = dwc2_hcd_get_maxp(&urb->pipe_info);
+ int maxp_mult = dwc2_hcd_get_maxp_mult(&urb->pipe_info);
+ int bytecount = maxp_mult * maxp;
char *speed, *type;
/* Initialize QH */
@@ -1473,6 +1474,7 @@ static void dwc2_qh_init(struct dwc2_hso
qh->data_toggle = DWC2_HC_PID_DATA0;
qh->maxp = maxp;
+ qh->maxp_mult = maxp_mult;
INIT_LIST_HEAD(&qh->qtd_list);
INIT_LIST_HEAD(&qh->qh_list_entry);
From: Coly Li <[email protected]>
commit 31b90956b124240aa8c63250243ae1a53585c5e2 upstream.
Recently people report bcache code compiled with gcc9 is broken, one of
the buggy behavior I observe is that two adjacent 4KB I/Os should merge
into one but they don't. Finally it turns out to be a stack corruption
caused by macro PRECEDING_KEY().
See how PRECEDING_KEY() is defined in bset.h,
437 #define PRECEDING_KEY(_k) \
438 ({ \
439 struct bkey *_ret = NULL; \
440 \
441 if (KEY_INODE(_k) || KEY_OFFSET(_k)) { \
442 _ret = &KEY(KEY_INODE(_k), KEY_OFFSET(_k), 0); \
443 \
444 if (!_ret->low) \
445 _ret->high--; \
446 _ret->low--; \
447 } \
448 \
449 _ret; \
450 })
At line 442, _ret points to address of a on-stack variable combined by
KEY(), the life range of this on-stack variable is in line 442-446,
once _ret is returned to bch_btree_insert_key(), the returned address
points to an invalid stack address and this address is overwritten in
the following called bch_btree_iter_init(). Then argument 'search' of
bch_btree_iter_init() points to some address inside stackframe of
bch_btree_iter_init(), exact address depends on how the compiler
allocates stack space. Now the stack is corrupted.
Fixes: 0eacac22034c ("bcache: PRECEDING_KEY()")
Signed-off-by: Coly Li <[email protected]>
Reviewed-by: Rolf Fokkens <[email protected]>
Reviewed-by: Pierre JUHEN <[email protected]>
Tested-by: Shenghui Wang <[email protected]>
Tested-by: Pierre JUHEN <[email protected]>
Cc: Kent Overstreet <[email protected]>
Cc: Nix <[email protected]>
Cc: [email protected]
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/md/bcache/bset.c | 16 +++++++++++++---
drivers/md/bcache/bset.h | 34 ++++++++++++++++++++--------------
2 files changed, 33 insertions(+), 17 deletions(-)
--- a/drivers/md/bcache/bset.c
+++ b/drivers/md/bcache/bset.c
@@ -825,12 +825,22 @@ unsigned bch_btree_insert_key(struct btr
struct bset *i = bset_tree_last(b)->data;
struct bkey *m, *prev = NULL;
struct btree_iter iter;
+ struct bkey preceding_key_on_stack = ZERO_KEY;
+ struct bkey *preceding_key_p = &preceding_key_on_stack;
BUG_ON(b->ops->is_extents && !KEY_SIZE(k));
- m = bch_btree_iter_init(b, &iter, b->ops->is_extents
- ? PRECEDING_KEY(&START_KEY(k))
- : PRECEDING_KEY(k));
+ /*
+ * If k has preceding key, preceding_key_p will be set to address
+ * of k's preceding key; otherwise preceding_key_p will be set
+ * to NULL inside preceding_key().
+ */
+ if (b->ops->is_extents)
+ preceding_key(&START_KEY(k), &preceding_key_p);
+ else
+ preceding_key(k, &preceding_key_p);
+
+ m = bch_btree_iter_init(b, &iter, preceding_key_p);
if (b->ops->insert_fixup(b, k, &iter, replace_key))
return status;
--- a/drivers/md/bcache/bset.h
+++ b/drivers/md/bcache/bset.h
@@ -418,20 +418,26 @@ static inline bool bch_cut_back(const st
return __bch_cut_back(where, k);
}
-#define PRECEDING_KEY(_k) \
-({ \
- struct bkey *_ret = NULL; \
- \
- if (KEY_INODE(_k) || KEY_OFFSET(_k)) { \
- _ret = &KEY(KEY_INODE(_k), KEY_OFFSET(_k), 0); \
- \
- if (!_ret->low) \
- _ret->high--; \
- _ret->low--; \
- } \
- \
- _ret; \
-})
+/*
+ * Pointer '*preceding_key_p' points to a memory object to store preceding
+ * key of k. If the preceding key does not exist, set '*preceding_key_p' to
+ * NULL. So the caller of preceding_key() needs to take care of memory
+ * which '*preceding_key_p' pointed to before calling preceding_key().
+ * Currently the only caller of preceding_key() is bch_btree_insert_key(),
+ * and it points to an on-stack variable, so the memory release is handled
+ * by stackframe itself.
+ */
+static inline void preceding_key(struct bkey *k, struct bkey **preceding_key_p)
+{
+ if (KEY_INODE(k) || KEY_OFFSET(k)) {
+ (**preceding_key_p) = KEY(KEY_INODE(k), KEY_OFFSET(k), 0);
+ if (!(*preceding_key_p)->low)
+ (*preceding_key_p)->high--;
+ (*preceding_key_p)->low--;
+ } else {
+ (*preceding_key_p) = NULL;
+ }
+}
static inline bool bch_ptr_invalid(struct btree_keys *b, const struct bkey *k)
{
From: Murray McAllister <[email protected]>
commit 5ed7f4b5eca11c3c69e7c8b53e4321812bc1ee1e upstream.
If SVGA_3D_CMD_DX_SET_SHADER is called with a shader ID
of SVGA3D_INVALID_ID, and a shader type of
SVGA3D_SHADERTYPE_INVALID, the calculated binding.shader_slot
will be 4294967295, leading to an out-of-bounds read in vmw_binding_loc()
when the offset is calculated.
Cc: <[email protected]>
Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Signed-off-by: Murray McAllister <[email protected]>
Reviewed-by: Thomas Hellstrom <[email protected]>
Signed-off-by: Thomas Hellstrom <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
@@ -2495,7 +2495,8 @@ static int vmw_cmd_dx_set_shader(struct
cmd = container_of(header, typeof(*cmd), header);
- if (cmd->body.type >= SVGA3D_SHADERTYPE_DX10_MAX) {
+ if (cmd->body.type >= SVGA3D_SHADERTYPE_DX10_MAX ||
+ cmd->body.type < SVGA3D_SHADERTYPE_MIN) {
DRM_ERROR("Illegal shader type %u.\n",
(unsigned) cmd->body.type);
return -EINVAL;
From: S.j. Wang <[email protected]>
commit b06c58c2a1eed571ea2a6640fdb85b7b00196b1e upstream.
When the output sample rate is [8kHz, 30kHz], the limitation
of the supported ratio range is [1/24, 8]. In the driver
we use (8kHz, 30kHz) instead of [8kHz, 30kHz].
So this patch is to fix this issue and the potential rounding
issue with divider.
Fixes: fff6e03c7b65 ("ASoC: fsl_asrc: add support for 8-30kHz
output sample rate")
Cc: <[email protected]>
Signed-off-by: Shengjiu Wang <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/fsl/fsl_asrc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/sound/soc/fsl/fsl_asrc.c
+++ b/sound/soc/fsl/fsl_asrc.c
@@ -286,8 +286,8 @@ static int fsl_asrc_config_pair(struct f
return -EINVAL;
}
- if ((outrate > 8000 && outrate < 30000) &&
- (outrate/inrate > 24 || inrate/outrate > 8)) {
+ if ((outrate >= 8000 && outrate <= 30000) &&
+ (outrate > 24 * inrate || inrate > 8 * outrate)) {
pair_err("exceed supported ratio range [1/24, 8] for \
inrate/outrate: %d/%d\n", inrate, outrate);
return -EINVAL;
From: Daniele Palmas <[email protected]>
commit f3dfd4072c3ee6e287f501a18b5718b185d6a940 upstream.
Added support for Telit LE910Cx 0x1260 and 0x1261 compositions.
Signed-off-by: Daniele Palmas <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1174,6 +1174,10 @@ static const struct usb_device_id option
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) },
+ { USB_DEVICE(TELIT_VENDOR_ID, 0x1260),
+ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+ { USB_DEVICE(TELIT_VENDOR_ID, 0x1261),
+ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
{ USB_DEVICE(TELIT_VENDOR_ID, 0x1900), /* Telit LN940 (QMI) */
.driver_info = NCTRL(0) | RSVD(1) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1901, 0xff), /* Telit LN940 (MBIM) */
From: Martin Schiller <[email protected]>
commit 4a4863bf2e7932e584a3a462d3c6daf891142ddc upstream.
Insert a padding between data and the stored_xfer_buffer pointer to
ensure they are not on the same cache line.
Otherwise, the stored_xfer_buffer gets corrupted for IN URBs on
non-cache-coherent systems. (In my case: Lantiq xRX200 MIPS)
Fixes: 3bc04e28a030 ("usb: dwc2: host: Get aligned DMA in a more supported way")
Fixes: 56406e017a88 ("usb: dwc2: Fix DMA alignment to start at allocated boundary")
Cc: <[email protected]>
Tested-by: Douglas Anderson <[email protected]>
Reviewed-by: Douglas Anderson <[email protected]>
Acked-by: Minas Harutyunyan <[email protected]>
Signed-off-by: Martin Schiller <[email protected]>
Signed-off-by: Felipe Balbi <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/dwc2/hcd.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -2652,8 +2652,10 @@ static void dwc2_free_dma_aligned_buffer
return;
/* Restore urb->transfer_buffer from the end of the allocated area */
- memcpy(&stored_xfer_buffer, urb->transfer_buffer +
- urb->transfer_buffer_length, sizeof(urb->transfer_buffer));
+ memcpy(&stored_xfer_buffer,
+ PTR_ALIGN(urb->transfer_buffer + urb->transfer_buffer_length,
+ dma_get_cache_alignment()),
+ sizeof(urb->transfer_buffer));
if (usb_urb_dir_in(urb))
memcpy(stored_xfer_buffer, urb->transfer_buffer,
@@ -2680,6 +2682,7 @@ static int dwc2_alloc_dma_aligned_buffer
* DMA
*/
kmalloc_size = urb->transfer_buffer_length +
+ (dma_get_cache_alignment() - 1) +
sizeof(urb->transfer_buffer);
kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
@@ -2690,7 +2693,8 @@ static int dwc2_alloc_dma_aligned_buffer
* Position value of original urb->transfer_buffer pointer to the end
* of allocation for later referencing
*/
- memcpy(kmalloc_ptr + urb->transfer_buffer_length,
+ memcpy(PTR_ALIGN(kmalloc_ptr + urb->transfer_buffer_length,
+ dma_get_cache_alignment()),
&urb->transfer_buffer, sizeof(urb->transfer_buffer));
if (usb_urb_dir_out(urb))
From: Borislav Petkov <[email protected]>
commit f3c74b38a55aefe1004200d15a83f109b510068c upstream.
Switch to using Donald Knuth's binary search algorithm (The Art of
Computer Programming, vol. 3, section 6.2.1). This should've been done
from the very beginning but the author must've been smoking something
very potent at the time.
The problem with the current one was that it would return the wrong
element index in certain situations:
https://lkml.kernel.org/r/CAM_iQpVd02zkVJ846cj-Fg1yUNuz6tY5q1Vpj4LrXmE06dPYYg@mail.gmail.com
and the noodling code after the loop was fishy at best.
So switch to using Knuth's binary search. The final result is much
cleaner and straightforward.
Fixes: 011d82611172 ("RAS: Add a Corrected Errors Collector")
Reported-by: Cong Wang <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: Tony Luck <[email protected]>
Cc: linux-edac <[email protected]>
Cc: <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/ras/cec.c | 34 ++++++++++++++++++++--------------
1 file changed, 20 insertions(+), 14 deletions(-)
--- a/drivers/ras/cec.c
+++ b/drivers/ras/cec.c
@@ -185,32 +185,38 @@ static void cec_timer_fn(unsigned long d
*/
static int __find_elem(struct ce_array *ca, u64 pfn, unsigned int *to)
{
+ int min = 0, max = ca->n - 1;
u64 this_pfn;
- int min = 0, max = ca->n;
- while (min < max) {
- int tmp = (max + min) >> 1;
+ while (min <= max) {
+ int i = (min + max) >> 1;
- this_pfn = PFN(ca->array[tmp]);
+ this_pfn = PFN(ca->array[i]);
if (this_pfn < pfn)
- min = tmp + 1;
+ min = i + 1;
else if (this_pfn > pfn)
- max = tmp;
- else {
- min = tmp;
- break;
+ max = i - 1;
+ else if (this_pfn == pfn) {
+ if (to)
+ *to = i;
+
+ return i;
}
}
+ /*
+ * When the loop terminates without finding @pfn, min has the index of
+ * the element slot where the new @pfn should be inserted. The loop
+ * terminates when min > max, which means the min index points to the
+ * bigger element while the max index to the smaller element, in-between
+ * which the new @pfn belongs to.
+ *
+ * For more details, see exercise 1, Section 6.2.1 in TAOCP, vol. 3.
+ */
if (to)
*to = min;
- this_pfn = PFN(ca->array[min]);
-
- if (this_pfn == pfn)
- return min;
-
return -ENOKEY;
}
From: Borislav Petkov <[email protected]>
commit 78f4e932f7760d965fb1569025d1576ab77557c5 upstream.
Adric Blake reported the following warning during suspend-resume:
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0000000000000000) \
at rIP: 0xffffffff8d267924 (native_write_msr+0x4/0x20)
Call Trace:
intel_set_tfa
intel_pmu_cpu_starting
? x86_pmu_dead_cpu
x86_pmu_starting_cpu
cpuhp_invoke_callback
? _raw_spin_lock_irqsave
notify_cpu_starting
start_secondary
secondary_startup_64
microcode: sig=0x806ea, pf=0x80, revision=0x96
microcode: updated to revision 0xb4, date = 2019-04-01
CPU1 is up
The MSR in question is MSR_TFA_RTM_FORCE_ABORT and that MSR is emulated
by microcode. The log above shows that the microcode loader callback
happens after the PMU restoration, leading to the conjecture that
because the microcode hasn't been updated yet, that MSR is not present
yet, leading to the #GP.
Add a microcode loader-specific hotplug vector which comes before
the PERF vectors and thus executes earlier and makes sure the MSR is
present.
Fixes: 400816f60c54 ("perf/x86/intel: Implement support for TSX Force Abort")
Reported-by: Adric Blake <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Reviewed-by: Thomas Gleixner <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: <[email protected]>
Cc: [email protected]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=203637
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/kernel/cpu/microcode/core.c | 2 +-
include/linux/cpuhotplug.h | 1 +
2 files changed, 2 insertions(+), 1 deletion(-)
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -873,7 +873,7 @@ int __init microcode_init(void)
goto out_ucode_group;
register_syscore_ops(&mc_syscore_ops);
- cpuhp_setup_state_nocalls(CPUHP_AP_ONLINE_DYN, "x86/microcode:online",
+ cpuhp_setup_state_nocalls(CPUHP_AP_MICROCODE_LOADER, "x86/microcode:online",
mc_cpu_online, mc_cpu_down_prep);
pr_info("Microcode Update Driver: v%s.", DRIVER_VERSION);
--- a/include/linux/cpuhotplug.h
+++ b/include/linux/cpuhotplug.h
@@ -100,6 +100,7 @@ enum cpuhp_state {
CPUHP_AP_IRQ_ARMADA_XP_STARTING,
CPUHP_AP_IRQ_BCM2836_STARTING,
CPUHP_AP_ARM_MVEBU_COHERENCY,
+ CPUHP_AP_MICROCODE_LOADER,
CPUHP_AP_PERF_X86_AMD_UNCORE_STARTING,
CPUHP_AP_PERF_X86_STARTING,
CPUHP_AP_PERF_X86_AMD_IBS_STARTING,
From: Jason Gerecke <[email protected]>
commit 6441fc781c344df61402be1fde582c4491fa35fa upstream.
The button numbering of the 2nd-gen Intuos Pro is not consistent between
the USB and Bluetooth interfaces. Over USB, the HID_GENERIC codepath
enumerates the eight ExpressKeys first (BTN_0 - BTN_7) followed by the
center modeswitch button (BTN_8). The Bluetooth codepath, however, has
the center modeswitch button as BTN_0 and the the eight ExpressKeys as
BTN_1 - BTN_8. To ensure userspace button mappings do not change
depending on how the tablet is connected, modify the Bluetooth codepath
to report buttons in the same order as USB.
To ensure the mode switch LED continues to toggle in response to the
mode switch button, the `wacom_is_led_toggled` function also requires
a small update.
Link: https://github.com/linuxwacom/input-wacom/pull/79
Fixes: 4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
Cc: <[email protected]> # 4.11+
Signed-off-by: Jason Gerecke <[email protected]>
Reviewed-by: Aaron Skomra <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/wacom_wac.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -1340,7 +1340,7 @@ static void wacom_intuos_pro2_bt_pad(str
struct input_dev *pad_input = wacom->pad_input;
unsigned char *data = wacom->data;
- int buttons = (data[282] << 1) | ((data[281] >> 6) & 0x01);
+ int buttons = data[282] | ((data[281] & 0x40) << 2);
int ring = data[285] & 0x7F;
bool ringstatus = data[285] & 0x80;
bool prox = buttons || ringstatus;
@@ -3650,7 +3650,7 @@ static void wacom_24hd_update_leds(struc
static bool wacom_is_led_toggled(struct wacom *wacom, int button_count,
int mask, int group)
{
- int button_per_group;
+ int group_button;
/*
* 21UX2 has LED group 1 to the left and LED group 0
@@ -3660,9 +3660,12 @@ static bool wacom_is_led_toggled(struct
if (wacom->wacom_wac.features.type == WACOM_21UX2)
group = 1 - group;
- button_per_group = button_count/wacom->led.count;
+ group_button = group * (button_count/wacom->led.count);
- return mask & (1 << (group * button_per_group));
+ if (wacom->wacom_wac.features.type == INTUOSP2_BT)
+ group_button = 8;
+
+ return mask & (1 << group_button);
}
static void wacom_update_led(struct wacom *wacom, int button_count, int mask,
From: Baruch Siach <[email protected]>
commit ecb4a353d3afd45b9bb30c85d03ee113a0589079 upstream.
The RTC_VL_READ ioctl reports the low battery condition. Still,
pcf8523_rtc_read_time() happily returns invalid dates in this case.
Check the battery health on pcf8523_rtc_read_time() to avoid that.
Reported-by: Erik Čuk <[email protected]>
Signed-off-by: Baruch Siach <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/rtc/rtc-pcf8523.c | 32 ++++++++++++++++++++++++--------
1 file changed, 24 insertions(+), 8 deletions(-)
--- a/drivers/rtc/rtc-pcf8523.c
+++ b/drivers/rtc/rtc-pcf8523.c
@@ -82,6 +82,18 @@ static int pcf8523_write(struct i2c_clie
return 0;
}
+static int pcf8523_voltage_low(struct i2c_client *client)
+{
+ u8 value;
+ int err;
+
+ err = pcf8523_read(client, REG_CONTROL3, &value);
+ if (err < 0)
+ return err;
+
+ return !!(value & REG_CONTROL3_BLF);
+}
+
static int pcf8523_select_capacitance(struct i2c_client *client, bool high)
{
u8 value;
@@ -164,6 +176,14 @@ static int pcf8523_rtc_read_time(struct
struct i2c_msg msgs[2];
int err;
+ err = pcf8523_voltage_low(client);
+ if (err < 0) {
+ return err;
+ } else if (err > 0) {
+ dev_err(dev, "low voltage detected, time is unreliable\n");
+ return -EINVAL;
+ }
+
msgs[0].addr = client->addr;
msgs[0].flags = 0;
msgs[0].len = 1;
@@ -248,17 +268,13 @@ static int pcf8523_rtc_ioctl(struct devi
unsigned long arg)
{
struct i2c_client *client = to_i2c_client(dev);
- u8 value;
- int ret = 0, err;
+ int ret;
switch (cmd) {
case RTC_VL_READ:
- err = pcf8523_read(client, REG_CONTROL3, &value);
- if (err < 0)
- return err;
-
- if (value & REG_CONTROL3_BLF)
- ret = 1;
+ ret = pcf8523_voltage_low(client);
+ if (ret < 0)
+ return ret;
if (copy_to_user((void __user *)arg, &ret, sizeof(int)))
return -EFAULT;
From: Kailang Yang <[email protected]>
commit 717f43d81afc1250300479075952a0e36d74ded3 upstream.
ALC255 and ALC256 were some difference for hidden register.
This update was suitable for ALC256.
Fixes: e69e7e03ed22 ("ALSA: hda/realtek - ALC256 speaker noise issue")
Signed-off-by: Kailang Yang <[email protected]>
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/pci/hda/patch_realtek.c | 75 +++++++++++++++++++++++++++++++++---------
1 file changed, 60 insertions(+), 15 deletions(-)
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3936,18 +3936,19 @@ static struct coef_fw alc225_pre_hsmode[
static void alc_headset_mode_unplugged(struct hda_codec *codec)
{
static struct coef_fw coef0255[] = {
+ WRITE_COEF(0x1b, 0x0c0b), /* LDO and MISC control */
WRITE_COEF(0x45, 0xd089), /* UAJ function set to menual mode */
UPDATE_COEFEX(0x57, 0x05, 1<<14, 0), /* Direct Drive HP Amp control(Set to verb control)*/
WRITE_COEF(0x06, 0x6104), /* Set MIC2 Vref gate with HP */
WRITE_COEFEX(0x57, 0x03, 0x8aa6), /* Direct Drive HP Amp control */
{}
};
- static struct coef_fw coef0255_1[] = {
- WRITE_COEF(0x1b, 0x0c0b), /* LDO and MISC control */
- {}
- };
static struct coef_fw coef0256[] = {
WRITE_COEF(0x1b, 0x0c4b), /* LDO and MISC control */
+ WRITE_COEF(0x45, 0xd089), /* UAJ function set to menual mode */
+ WRITE_COEF(0x06, 0x6104), /* Set MIC2 Vref gate with HP */
+ WRITE_COEFEX(0x57, 0x03, 0x09a3), /* Direct Drive HP Amp control */
+ UPDATE_COEFEX(0x57, 0x05, 1<<14, 0), /* Direct Drive HP Amp control(Set to verb control)*/
{}
};
static struct coef_fw coef0233[] = {
@@ -4010,13 +4011,11 @@ static void alc_headset_mode_unplugged(s
switch (codec->core.vendor_id) {
case 0x10ec0255:
- alc_process_coef_fw(codec, coef0255_1);
alc_process_coef_fw(codec, coef0255);
break;
case 0x10ec0236:
case 0x10ec0256:
alc_process_coef_fw(codec, coef0256);
- alc_process_coef_fw(codec, coef0255);
break;
case 0x10ec0234:
case 0x10ec0274:
@@ -4066,6 +4065,12 @@ static void alc_headset_mode_mic_in(stru
WRITE_COEF(0x06, 0x6100), /* Set MIC2 Vref gate to normal */
{}
};
+ static struct coef_fw coef0256[] = {
+ UPDATE_COEFEX(0x57, 0x05, 1<<14, 1<<14), /* Direct Drive HP Amp control(Set to verb control)*/
+ WRITE_COEFEX(0x57, 0x03, 0x09a3),
+ WRITE_COEF(0x06, 0x6100), /* Set MIC2 Vref gate to normal */
+ {}
+ };
static struct coef_fw coef0233[] = {
UPDATE_COEF(0x35, 0, 1<<14),
WRITE_COEF(0x06, 0x2100),
@@ -4113,14 +4118,19 @@ static void alc_headset_mode_mic_in(stru
};
switch (codec->core.vendor_id) {
- case 0x10ec0236:
case 0x10ec0255:
- case 0x10ec0256:
alc_write_coef_idx(codec, 0x45, 0xc489);
snd_hda_set_pin_ctl_cache(codec, hp_pin, 0);
alc_process_coef_fw(codec, coef0255);
snd_hda_set_pin_ctl_cache(codec, mic_pin, PIN_VREF50);
break;
+ case 0x10ec0236:
+ case 0x10ec0256:
+ alc_write_coef_idx(codec, 0x45, 0xc489);
+ snd_hda_set_pin_ctl_cache(codec, hp_pin, 0);
+ alc_process_coef_fw(codec, coef0256);
+ snd_hda_set_pin_ctl_cache(codec, mic_pin, PIN_VREF50);
+ break;
case 0x10ec0234:
case 0x10ec0274:
case 0x10ec0294:
@@ -4199,6 +4209,14 @@ static void alc_headset_mode_default(str
WRITE_COEF(0x49, 0x0049),
{}
};
+ static struct coef_fw coef0256[] = {
+ WRITE_COEF(0x45, 0xc489),
+ WRITE_COEFEX(0x57, 0x03, 0x0da3),
+ WRITE_COEF(0x49, 0x0049),
+ UPDATE_COEFEX(0x57, 0x05, 1<<14, 0), /* Direct Drive HP Amp control(Set to verb control)*/
+ WRITE_COEF(0x06, 0x6100),
+ {}
+ };
static struct coef_fw coef0233[] = {
WRITE_COEF(0x06, 0x2100),
WRITE_COEF(0x32, 0x4ea3),
@@ -4246,11 +4264,16 @@ static void alc_headset_mode_default(str
alc_process_coef_fw(codec, alc225_pre_hsmode);
alc_process_coef_fw(codec, coef0225);
break;
- case 0x10ec0236:
case 0x10ec0255:
- case 0x10ec0256:
alc_process_coef_fw(codec, coef0255);
break;
+ case 0x10ec0236:
+ case 0x10ec0256:
+ alc_write_coef_idx(codec, 0x1b, 0x0e4b);
+ alc_write_coef_idx(codec, 0x45, 0xc089);
+ msleep(50);
+ alc_process_coef_fw(codec, coef0256);
+ break;
case 0x10ec0234:
case 0x10ec0274:
case 0x10ec0294:
@@ -4294,8 +4317,7 @@ static void alc_headset_mode_ctia(struct
};
static struct coef_fw coef0256[] = {
WRITE_COEF(0x45, 0xd489), /* Set to CTIA type */
- WRITE_COEF(0x1b, 0x0c6b),
- WRITE_COEFEX(0x57, 0x03, 0x8ea6),
+ WRITE_COEF(0x1b, 0x0e6b),
{}
};
static struct coef_fw coef0233[] = {
@@ -4410,8 +4432,7 @@ static void alc_headset_mode_omtp(struct
};
static struct coef_fw coef0256[] = {
WRITE_COEF(0x45, 0xe489), /* Set to OMTP Type */
- WRITE_COEF(0x1b, 0x0c6b),
- WRITE_COEFEX(0x57, 0x03, 0x8ea6),
+ WRITE_COEF(0x1b, 0x0e6b),
{}
};
static struct coef_fw coef0233[] = {
@@ -4540,13 +4561,37 @@ static void alc_determine_headset_type(s
};
switch (codec->core.vendor_id) {
- case 0x10ec0236:
case 0x10ec0255:
+ alc_process_coef_fw(codec, coef0255);
+ msleep(300);
+ val = alc_read_coef_idx(codec, 0x46);
+ is_ctia = (val & 0x0070) == 0x0070;
+ break;
+ case 0x10ec0236:
case 0x10ec0256:
+ alc_write_coef_idx(codec, 0x1b, 0x0e4b);
+ alc_write_coef_idx(codec, 0x06, 0x6104);
+ alc_write_coefex_idx(codec, 0x57, 0x3, 0x09a3);
+
+ snd_hda_codec_write(codec, 0x21, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
+ msleep(80);
+ snd_hda_codec_write(codec, 0x21, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, 0x0);
+
alc_process_coef_fw(codec, coef0255);
msleep(300);
val = alc_read_coef_idx(codec, 0x46);
is_ctia = (val & 0x0070) == 0x0070;
+
+ alc_write_coefex_idx(codec, 0x57, 0x3, 0x0da3);
+ alc_update_coefex_idx(codec, 0x57, 0x5, 1<<14, 0);
+
+ snd_hda_codec_write(codec, 0x21, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT);
+ msleep(80);
+ snd_hda_codec_write(codec, 0x21, 0,
+ AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE);
break;
case 0x10ec0234:
case 0x10ec0274:
From: Takashi Sakamoto <[email protected]>
commit d8fa87c368f5b4096c4746894fdcc195da285df1 upstream.
Stanton SCS.1m can transfer isochronous packet with Multi Bit Linear
Audio data channels, therefore it allows software to capture PCM
substream. However, ALSA oxfw driver doesn't.
This commit changes the driver to add one PCM substream for capture
direction.
Fixes: de5126cc3c0b ("ALSA: oxfw: add stream format quirk for SCS.1 models")
Cc: <[email protected]> # v4.5+
Signed-off-by: Takashi Sakamoto <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/firewire/oxfw/oxfw.c | 3 ---
1 file changed, 3 deletions(-)
--- a/sound/firewire/oxfw/oxfw.c
+++ b/sound/firewire/oxfw/oxfw.c
@@ -176,9 +176,6 @@ static int detect_quirks(struct snd_oxfw
oxfw->midi_input_ports = 0;
oxfw->midi_output_ports = 0;
- /* Output stream exists but no data channels are useful. */
- oxfw->has_output = false;
-
return snd_oxfw_scs1x_add(oxfw);
}
[ Upstream commit 2924b52117b2812e9633d5ea337333299166d373 ]
According to the SDM, for MSR_IA32_PERFCTR0/1 "the lower-order 32 bits of
each MSR may be written with any value, and the high-order 8 bits are
sign-extended according to the value of bit 31", but the fixed counters
in real hardware are limited to the width of the fixed counters ("bits
beyond the width of the fixed-function counter are reserved and must be
written as zeros"). Fix KVM to do the same.
Reported-by: Nadav Amit <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/x86/kvm/pmu_intel.c | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kvm/pmu_intel.c b/arch/x86/kvm/pmu_intel.c
index 5ab4a364348e..2729131fe9bf 100644
--- a/arch/x86/kvm/pmu_intel.c
+++ b/arch/x86/kvm/pmu_intel.c
@@ -235,11 +235,14 @@ static int intel_pmu_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
}
break;
default:
- if ((pmc = get_gp_pmc(pmu, msr, MSR_IA32_PERFCTR0)) ||
- (pmc = get_fixed_pmc(pmu, msr))) {
- if (!msr_info->host_initiated)
- data = (s64)(s32)data;
- pmc->counter += data - pmc_read_counter(pmc);
+ if ((pmc = get_gp_pmc(pmu, msr, MSR_IA32_PERFCTR0))) {
+ if (msr_info->host_initiated)
+ pmc->counter = data;
+ else
+ pmc->counter = (s32)data;
+ return 0;
+ } else if ((pmc = get_fixed_pmc(pmu, msr))) {
+ pmc->counter = data;
return 0;
} else if ((pmc = get_gp_pmc(pmu, msr, MSR_P6_EVNTSEL0))) {
if (data == pmc->eventsel)
--
2.20.1
[ Upstream commit d0adee5d12752256ff0c87ad7f002f21fe49d618 ]
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/scsi/qedi/qedi_iscsi.c: In function 'qedi_ep_connect':
drivers/scsi/qedi/qedi_iscsi.c:813:23: warning: variable 'udev' set but not used [-Wunused-but-set-variable]
drivers/scsi/qedi/qedi_iscsi.c:812:18: warning: variable 'cdev' set but not used [-Wunused-but-set-variable]
These have never been used since introduction.
Signed-off-by: YueHaibing <[email protected]>
Acked-by: Manish Rangankar <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qedi/qedi_iscsi.c | 4 ----
1 file changed, 4 deletions(-)
diff --git a/drivers/scsi/qedi/qedi_iscsi.c b/drivers/scsi/qedi/qedi_iscsi.c
index 0b7267e68336..94f3829b1974 100644
--- a/drivers/scsi/qedi/qedi_iscsi.c
+++ b/drivers/scsi/qedi/qedi_iscsi.c
@@ -817,8 +817,6 @@ qedi_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
struct qedi_endpoint *qedi_ep;
struct sockaddr_in *addr;
struct sockaddr_in6 *addr6;
- struct qed_dev *cdev = NULL;
- struct qedi_uio_dev *udev = NULL;
struct iscsi_path path_req;
u32 msg_type = ISCSI_KEVENT_IF_DOWN;
u32 iscsi_cid = QEDI_CID_RESERVED;
@@ -838,8 +836,6 @@ qedi_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
}
qedi = iscsi_host_priv(shost);
- cdev = qedi->cdev;
- udev = qedi->udev;
if (test_bit(QEDI_IN_OFFLINE, &qedi->flags) ||
test_bit(QEDI_IN_RECOVERY, &qedi->flags)) {
--
2.20.1
[ Upstream commit 7ba36eccb3f83983a651efd570b4f933ecad1b5c ]
The arm64 ptdump code can race with concurrent modification of the
kernel page tables. At the time this was added, this was sound as:
* Modifications to leaf entries could result in stale information being
logged, but would not result in a functional problem.
* Boot time modifications to non-leaf entries (e.g. freeing of initmem)
were performed when the ptdump code cannot be invoked.
* At runtime, modifications to non-leaf entries only occurred in the
vmalloc region, and these were strictly additive, as intermediate
entries were never freed.
However, since commit:
commit 324420bf91f6 ("arm64: add support for ioremap() block mappings")
... it has been possible to create huge mappings in the vmalloc area at
runtime, and as part of this existing intermediate levels of table my be
removed and freed.
It's possible for the ptdump code to race with this, and continue to
walk tables which have been freed (and potentially poisoned or
reallocated). As a result of this, the ptdump code may dereference bogus
addresses, which could be fatal.
Since huge-vmap is a TLB and memory optimization, we can disable it when
the runtime ptdump code is in use to avoid this problem.
Cc: Catalin Marinas <[email protected]>
Fixes: 324420bf91f60582 ("arm64: add support for ioremap() block mappings")
Acked-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Mark Rutland <[email protected]>
Signed-off-by: Anshuman Khandual <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/mm/mmu.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 6ac0d32d60a5..abb9d2ecc675 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -899,13 +899,18 @@ void *__init fixmap_remap_fdt(phys_addr_t dt_phys)
int __init arch_ioremap_pud_supported(void)
{
- /* only 4k granule supports level 1 block mappings */
- return IS_ENABLED(CONFIG_ARM64_4K_PAGES);
+ /*
+ * Only 4k granule supports level 1 block mappings.
+ * SW table walks can't handle removal of intermediate entries.
+ */
+ return IS_ENABLED(CONFIG_ARM64_4K_PAGES) &&
+ !IS_ENABLED(CONFIG_ARM64_PTDUMP_DEBUGFS);
}
int __init arch_ioremap_pmd_supported(void)
{
- return 1;
+ /* See arch_ioremap_pud_supported() */
+ return !IS_ENABLED(CONFIG_ARM64_PTDUMP_DEBUGFS);
}
int pud_set_huge(pud_t *pud, phys_addr_t phys, pgprot_t prot)
--
2.20.1
[ Upstream commit 3f98bcc58cd5f1e4668db289dcab771874cc0920 ]
We already have a proper stub if lightnvm is not enabled, so don't bother
with the ifdef.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvme/host/core.c | 2 --
1 file changed, 2 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 65f3f1a34b6b..d98ffb1ce629 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -1042,10 +1042,8 @@ static int nvme_ioctl(struct block_device *bdev, fmode_t mode,
case NVME_IOCTL_SUBMIT_IO:
return nvme_submit_io(ns, (void __user *)arg);
default:
-#ifdef CONFIG_NVM
if (ns->ndev)
return nvme_nvm_ioctl(ns, cmd, arg);
-#endif
if (is_sed_ioctl(cmd))
return sed_ioctl(ns->ctrl->opal_dev, cmd,
(void __user *) arg);
--
2.20.1
[ Upstream commit 40ea97290b08be2e038b31cbb33097d1145e8169 ]
New tooling noticed this mishap:
kernel/kcov.o: warning: objtool: write_comp_data()+0x138: call to __stack_chk_fail() with UACCESS enabled
kernel/kcov.o: warning: objtool: __sanitizer_cov_trace_pc()+0xd9: call to __stack_chk_fail() with UACCESS enabled
All the other instrumentation (KASAN,UBSAN) also have stack protector
disabled.
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: Josh Poimboeuf <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/Makefile | 1 +
1 file changed, 1 insertion(+)
diff --git a/kernel/Makefile b/kernel/Makefile
index 172d151d429c..3085141c055c 100644
--- a/kernel/Makefile
+++ b/kernel/Makefile
@@ -30,6 +30,7 @@ KCOV_INSTRUMENT_extable.o := n
# Don't self-instrument.
KCOV_INSTRUMENT_kcov.o := n
KASAN_SANITIZE_kcov.o := n
+CFLAGS_kcov.o := $(call cc-option, -fno-conserve-stack -fno-stack-protector)
# cond_syscall is currently not LTO compatible
CFLAGS_sys_ni.o = $(DISABLE_LTO)
--
2.20.1
[ Upstream commit c8cb261a072c88ca1aff0e804a30db4c7606521b ]
There was a missing qualification of a valid ndlp structure when calling to
send an RRQ for an abort. Add the check.
Signed-off-by: Dick Kennedy <[email protected]>
Signed-off-by: James Smart <[email protected]>
Tested-by: Bart Van Assche <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/lpfc/lpfc_els.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index 57cddbc4a977..ddd29752d96d 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -7065,7 +7065,10 @@ int
lpfc_send_rrq(struct lpfc_hba *phba, struct lpfc_node_rrq *rrq)
{
struct lpfc_nodelist *ndlp = lpfc_findnode_did(rrq->vport,
- rrq->nlp_DID);
+ rrq->nlp_DID);
+ if (!ndlp)
+ return 1;
+
if (lpfc_test_rrq_active(phba, ndlp, rrq->xritag))
return lpfc_issue_els_rrq(rrq->vport, ndlp,
rrq->nlp_DID, rrq);
--
2.20.1
[ Upstream commit d6423bd03031c020121da26c41a26bd5cc6d0da3 ]
There are several Beckhoff Automation industrial PC boards which use
pmc_plt_clk* clocks for ethernet controllers. This adds affected boards
to critclk_systems DMI table so the clocks are marked as CLK_CRITICAL and
not turned off.
Fixes: 648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Steffen Dirkwinkel <[email protected]>
Signed-off-by: Andy Shevchenko <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/platform/x86/pmc_atom.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/drivers/platform/x86/pmc_atom.c b/drivers/platform/x86/pmc_atom.c
index e3e1f83a2dd7..d4d089c37944 100644
--- a/drivers/platform/x86/pmc_atom.c
+++ b/drivers/platform/x86/pmc_atom.c
@@ -443,6 +443,30 @@ static const struct dmi_system_id critclk_systems[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "3I380D"),
},
},
+ {
+ /* pmc_plt_clk* - are used for ethernet controllers */
+ .ident = "Beckhoff CB3163",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"),
+ DMI_MATCH(DMI_BOARD_NAME, "CB3163"),
+ },
+ },
+ {
+ /* pmc_plt_clk* - are used for ethernet controllers */
+ .ident = "Beckhoff CB6263",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"),
+ DMI_MATCH(DMI_BOARD_NAME, "CB6263"),
+ },
+ },
+ {
+ /* pmc_plt_clk* - are used for ethernet controllers */
+ .ident = "Beckhoff CB6363",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Beckhoff Automation"),
+ DMI_MATCH(DMI_BOARD_NAME, "CB6363"),
+ },
+ },
{ /*sentinel*/ }
};
--
2.20.1
[ Upstream commit c01dafad77fea8d64c4fdca0a6031c980842ad65 ]
Several places (dimm_devs.c, core.c etc) include label.h but only
label.c uses NSINDEX_SIGNATURE, so move its definition to label.c
instead.
In file included from drivers/nvdimm/dimm_devs.c:23:
drivers/nvdimm/label.h:41:19: warning: 'NSINDEX_SIGNATURE' defined but
not used [-Wunused-const-variable=]
Also, some places abuse "/**" which is only reserved for the kernel-doc.
drivers/nvdimm/bus.c:648: warning: cannot understand function prototype:
'struct attribute_group nd_device_attribute_group = '
drivers/nvdimm/bus.c:677: warning: cannot understand function prototype:
'struct attribute_group nd_numa_attribute_group = '
Those are just some member assignments for the "struct attribute_group"
instances and it can't be expressed in the kernel-doc.
Reviewed-by: Vishal Verma <[email protected]>
Signed-off-by: Qian Cai <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvdimm/bus.c | 4 ++--
drivers/nvdimm/label.c | 2 ++
drivers/nvdimm/label.h | 2 --
3 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/nvdimm/bus.c b/drivers/nvdimm/bus.c
index a6746a1f20ae..2f1b54fab399 100644
--- a/drivers/nvdimm/bus.c
+++ b/drivers/nvdimm/bus.c
@@ -608,7 +608,7 @@ static struct attribute *nd_device_attributes[] = {
NULL,
};
-/**
+/*
* nd_device_attribute_group - generic attributes for all devices on an nd bus
*/
struct attribute_group nd_device_attribute_group = {
@@ -637,7 +637,7 @@ static umode_t nd_numa_attr_visible(struct kobject *kobj, struct attribute *a,
return a->mode;
}
-/**
+/*
* nd_numa_attribute_group - NUMA attributes for all devices on an nd bus
*/
struct attribute_group nd_numa_attribute_group = {
diff --git a/drivers/nvdimm/label.c b/drivers/nvdimm/label.c
index 6a16017cc0d9..1fb3a2491131 100644
--- a/drivers/nvdimm/label.c
+++ b/drivers/nvdimm/label.c
@@ -25,6 +25,8 @@ static guid_t nvdimm_btt2_guid;
static guid_t nvdimm_pfn_guid;
static guid_t nvdimm_dax_guid;
+static const char NSINDEX_SIGNATURE[] = "NAMESPACE_INDEX\0";
+
static u32 best_seq(u32 a, u32 b)
{
a &= NSINDEX_SEQ_MASK;
diff --git a/drivers/nvdimm/label.h b/drivers/nvdimm/label.h
index 1ebf4d3d01ba..9ed772db6900 100644
--- a/drivers/nvdimm/label.h
+++ b/drivers/nvdimm/label.h
@@ -38,8 +38,6 @@ enum {
ND_NSINDEX_INIT = 0x1,
};
-static const char NSINDEX_SIGNATURE[] = "NAMESPACE_INDEX\0";
-
/**
* struct nd_namespace_index - label set superblock
* @sig: NAMESPACE_INDEX\0
--
2.20.1
From: Jörgen Storvist <[email protected]>
commit 5417a7e482962952e622eabd60cd3600dd65dedf upstream.
Added IDs for Simcom SIM7500/SIM7600 series cellular module in RNDIS
mode. Reserved the interface for ADB.
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1e0e ProdID=9011 Rev=03.18
S: Manufacturer=SimTech, Incorporated
S: Product=SimTech, Incorporated
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 8 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=ff Driver=rndis_host
I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
Signed-off-by: Jörgen Storvist <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/option.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -1775,6 +1775,8 @@ static const struct usb_device_id option
{ USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E),
.driver_info = RSVD(5) | RSVD(6) },
{ USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9003, 0xff) }, /* Simcom SIM7500/SIM7600 MBIM mode */
+ { USB_DEVICE_INTERFACE_CLASS(0x1e0e, 0x9011, 0xff), /* Simcom SIM7500/SIM7600 RNDIS mode */
+ .driver_info = RSVD(7) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200),
.driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D),
[ Upstream commit f0654ba94e33699b295ce4f3dc73094db6209035 ]
This reverts commit feb689025fbb6f0aa6297d3ddf97de945ea4ad32.
The fix attempt was incorrect, leading to the mutex deadlock through
the close of OSS sequencer client. The proper fix needs more
consideration, so let's revert it now.
Fixes: feb689025fbb ("ALSA: seq: Protect in-kernel ioctl calls with mutex")
Reported-by: [email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/seq/seq_clientmgr.c | 9 ++-------
1 file changed, 2 insertions(+), 7 deletions(-)
diff --git a/sound/core/seq/seq_clientmgr.c b/sound/core/seq/seq_clientmgr.c
index 068880ac47b5..7d2c07c1237c 100644
--- a/sound/core/seq/seq_clientmgr.c
+++ b/sound/core/seq/seq_clientmgr.c
@@ -2342,19 +2342,14 @@ int snd_seq_kernel_client_ctl(int clientid, unsigned int cmd, void *arg)
{
const struct ioctl_handler *handler;
struct snd_seq_client *client;
- int err;
client = clientptr(clientid);
if (client == NULL)
return -ENXIO;
for (handler = ioctl_handlers; handler->cmd > 0; ++handler) {
- if (handler->cmd == cmd) {
- mutex_lock(&client->ioctl_mutex);
- err = handler->func(client, arg);
- mutex_unlock(&client->ioctl_mutex);
- return err;
- }
+ if (handler->cmd == cmd)
+ return handler->func(client, arg);
}
pr_debug("ALSA: seq unknown ioctl() 0x%x (type='%c', number=0x%02x)\n",
--
2.20.1
From: Andrey Ryabinin <[email protected]>
commit f3176ec9420de0c385023afa3e4970129444ac2f upstream.
Since commit d52888aa2753 ("x86/mm: Move LDT remap out of KASLR region on
5-level paging") kernel doesn't boot with KASAN on 5-level paging machines.
The bug is actually in early_p4d_offset() and introduced by commit
12a8cc7fcf54 ("x86/kasan: Use the same shadow offset for 4- and 5-level paging")
early_p4d_offset() tries to convert pgd_val(*pgd) value to a physical
address. This doesn't make sense because pgd_val() already contains the
physical address.
It did work prior to commit d52888aa2753 because the result of
"__pa_nodebug(pgd_val(*pgd)) & PTE_PFN_MASK" was the same as "pgd_val(*pgd)
& PTE_PFN_MASK". __pa_nodebug() just set some high bits which were masked
out by applying PTE_PFN_MASK.
After the change of the PAGE_OFFSET offset in commit d52888aa2753
__pa_nodebug(pgd_val(*pgd)) started to return a value with more high bits
set and PTE_PFN_MASK wasn't enough to mask out all of them. So it returns a
wrong not even canonical address and crashes on the attempt to dereference
it.
Switch back to pgd_val() & PTE_PFN_MASK to cure the issue.
Fixes: 12a8cc7fcf54 ("x86/kasan: Use the same shadow offset for 4- and 5-level paging")
Reported-by: Kirill A. Shutemov <[email protected]>
Signed-off-by: Andrey Ryabinin <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Cc: Borislav Petkov <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Alexander Potapenko <[email protected]>
Cc: Dmitry Vyukov <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/x86/mm/kasan_init_64.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/x86/mm/kasan_init_64.c
+++ b/arch/x86/mm/kasan_init_64.c
@@ -194,7 +194,7 @@ static inline p4d_t *early_p4d_offset(pg
if (!IS_ENABLED(CONFIG_X86_5LEVEL))
return (p4d_t *)pgd;
- p4d = __pa_nodebug(pgd_val(*pgd)) & PTE_PFN_MASK;
+ p4d = pgd_val(*pgd) & PTE_PFN_MASK;
p4d += __START_KERNEL_map - phys_base;
return (p4d_t *)p4d + p4d_index(addr);
}
[ Upstream commit b281218ad4311a0342a40cb02fb17a363df08b48 ]
There is an out-of-bounds access to "config[len - 1]" array when the
variable "len" is zero.
See commit dada6a43b040 ("kgdboc: fix KASAN global-out-of-bounds bug
in param_set_kgdboc_var()") for details.
Signed-off-by: Young Xiao <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/misc/kgdbts.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index fc7efedbc4be..94cbc5c98cae 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -1134,7 +1134,7 @@ static void kgdbts_put_char(u8 chr)
static int param_set_kgdbts_var(const char *kmessage, struct kernel_param *kp)
{
- int len = strlen(kmessage);
+ size_t len = strlen(kmessage);
if (len >= MAX_CONFIG_LEN) {
printk(KERN_ERR "kgdbts: config string too long\n");
@@ -1154,7 +1154,7 @@ static int param_set_kgdbts_var(const char *kmessage, struct kernel_param *kp)
strcpy(config, kmessage);
/* Chop out \n char as a result of echo */
- if (config[len - 1] == '\n')
+ if (len && config[len - 1] == '\n')
config[len - 1] = '\0';
/* Go and configure with the new params. */
--
2.20.1
From: Marco Zatta <[email protected]>
commit bd21f0222adab64974b7d1b4b8c7ce6b23e9ea4d upstream.
This patch fixes the chipmunk-like voice that manifets randomly when
using the integrated mic of the Logitech Webcam HD C270.
The issue was solved initially for this device by commit 2394d67e446b
("USB: add RESET_RESUME for webcams shown to be quirky") but it was then
reintroduced by e387ef5c47dd ("usb: Add USB_QUIRK_RESET_RESUME for all
Logitech UVC webcams"). This patch is to have the fix back.
Signed-off-by: Marco Zatta <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/core/quirks.c | 3 +++
1 file changed, 3 insertions(+)
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -70,6 +70,9 @@ static const struct usb_device_id usb_qu
/* Cherry Stream G230 2.0 (G85-231) and 3.0 (G85-232) */
{ USB_DEVICE(0x046a, 0x0023), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Logitech HD Webcam C270 */
+ { USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Logitech HD Pro Webcams C920, C920-C, C925e and C930e */
{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT },
[ Upstream commit 01eb42afb45719cb41bb32c278e068073738899d ]
arch/s390/lib/uaccess.c is built without kasan instrumentation. Kasan
checks are performed explicitly in copy_from_user/copy_to_user
functions. But since those functions could be inlined, calls from
files like uaccess.c with instrumentation disabled won't generate
kasan reports. This is currently the case with strncpy_from_user
function which was revealed by newly added kasan test. Avoid inlining of
copy_from_user/copy_to_user when the kernel is built with kasan support
to make sure kasan checks are fully functional.
Signed-off-by: Vasily Gorbik <[email protected]>
Signed-off-by: Martin Schwidefsky <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/s390/include/asm/uaccess.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
index cdd0f0d999e2..689eae8d3859 100644
--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -67,8 +67,10 @@ raw_copy_from_user(void *to, const void __user *from, unsigned long n);
unsigned long __must_check
raw_copy_to_user(void __user *to, const void *from, unsigned long n);
+#ifndef CONFIG_KASAN
#define INLINE_COPY_FROM_USER
#define INLINE_COPY_TO_USER
+#endif
#ifdef CONFIG_HAVE_MARCH_Z10_FEATURES
--
2.20.1
From: Chris Packham <[email protected]>
commit c5f81656a18b271976a86724dadd8344e54de74e upstream.
This is adds the vendor and device id for the AT-VT-Kit3 which is a
pl2303-based device.
Signed-off-by: Chris Packham <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/serial/pl2303.c | 1 +
drivers/usb/serial/pl2303.h | 3 +++
2 files changed, 4 insertions(+)
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -109,6 +109,7 @@ static const struct usb_device_id id_tab
{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
+ { USB_DEVICE(AT_VENDOR_ID, AT_VTKIT3_PRODUCT_ID) },
{ } /* Terminating entry */
};
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -160,3 +160,6 @@
#define SMART_VENDOR_ID 0x0b8c
#define SMART_PRODUCT_ID 0x2303
+/* Allied Telesis VT-Kit3 */
+#define AT_VENDOR_ID 0x0caa
+#define AT_VTKIT3_PRODUCT_ID 0x3001
[ Upstream commit 94d250fae48e6f873d8362308f5c4d02cd1b1fd2 ]
Fix a racing condition in ipheth.c that can lead to slow performance.
Bug: In ipheth_tx(), netif_wake_queue() may be called on the callback
ipheth_sndbulk_callback(), _before_ netif_stop_queue() is called.
When this happens, the queue is stopped longer than it needs to be,
thus reducing network performance.
Fix: Move netif_stop_queue() in front of usb_submit_urb(). Now the order
is always correct. In case, usb_submit_urb() fails, the queue is woken up
again as callback will not fire.
Testing: This racing condition is usually not noticeable, as it has to
occur very frequently to slowdown the network. The callback from the USB
is usually triggered slow enough, so the situation does not appear.
However, on a Ubuntu Linux on VMWare Workstation, running on Windows 10,
the we loose the race quite often and the following speedup can be noticed:
Without this patch: Download: 4.10 Mbit/s, Upload: 4.01 Mbit/s
With this patch: Download: 36.23 Mbit/s, Upload: 17.61 Mbit/s
Signed-off-by: Oliver Zweigle <[email protected]>
Signed-off-by: Bernd Eckstein <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/ipheth.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index 3d8a70d3ea9b..3d71f1716390 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -437,17 +437,18 @@ static int ipheth_tx(struct sk_buff *skb, struct net_device *net)
dev);
dev->tx_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ netif_stop_queue(net);
retval = usb_submit_urb(dev->tx_urb, GFP_ATOMIC);
if (retval) {
dev_err(&dev->intf->dev, "%s: usb_submit_urb: %d\n",
__func__, retval);
dev->net->stats.tx_errors++;
dev_kfree_skb_any(skb);
+ netif_wake_queue(net);
} else {
dev->net->stats.tx_packets++;
dev->net->stats.tx_bytes += skb->len;
dev_consume_skb_any(skb);
- netif_stop_queue(net);
}
return NETDEV_TX_OK;
--
2.20.1
[ Upstream commit c09581a52765a85f19fc35340127396d5e3379cc ]
KASAN reports this:
BUG: KASAN: global-out-of-bounds in qedi_dbg_err+0xda/0x330 [qedi]
Read of size 31 at addr ffffffffc12b0ae0 by task syz-executor.0/2429
CPU: 0 PID: 2429 Comm: syz-executor.0 Not tainted 5.0.0-rc7+ #45
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0xfa/0x1ce lib/dump_stack.c:113
print_address_description+0x1c4/0x270 mm/kasan/report.c:187
kasan_report+0x149/0x18d mm/kasan/report.c:317
memcpy+0x1f/0x50 mm/kasan/common.c:130
qedi_dbg_err+0xda/0x330 [qedi]
? 0xffffffffc12d0000
qedi_init+0x118/0x1000 [qedi]
? 0xffffffffc12d0000
? 0xffffffffc12d0000
? 0xffffffffc12d0000
do_one_initcall+0xfa/0x5ca init/main.c:887
do_init_module+0x204/0x5f6 kernel/module.c:3460
load_module+0x66b2/0x8570 kernel/module.c:3808
__do_sys_finit_module+0x238/0x2a0 kernel/module.c:3902
do_syscall_64+0x147/0x600 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x462e99
Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f2d57e55c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
RAX: ffffffffffffffda RBX: 000000000073bfa0 RCX: 0000000000462e99
RDX: 0000000000000000 RSI: 00000000200003c0 RDI: 0000000000000003
RBP: 00007f2d57e55c70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f2d57e566bc
R13: 00000000004bcefb R14: 00000000006f7030 R15: 0000000000000004
The buggy address belongs to the variable:
__func__.67584+0x0/0xffffffffffffd520 [qedi]
Memory state around the buggy address:
ffffffffc12b0980: fa fa fa fa 00 04 fa fa fa fa fa fa 00 00 05 fa
ffffffffc12b0a00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 05 fa fa
> ffffffffc12b0a80: fa fa fa fa 00 06 fa fa fa fa fa fa 00 02 fa fa
^
ffffffffc12b0b00: fa fa fa fa 00 00 04 fa fa fa fa fa 00 00 03 fa
ffffffffc12b0b80: fa fa fa fa 00 00 02 fa fa fa fa fa 00 00 04 fa
Currently the qedi_dbg_* family of functions can overrun the end of the
source string if it is less than the destination buffer length because of
the use of a fixed sized memcpy. Remove the memset/memcpy calls to nfunc
and just use func instead as it is always a null terminated string.
Reported-by: Hulk Robot <[email protected]>
Fixes: ace7f46ba5fd ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Signed-off-by: YueHaibing <[email protected]>
Reviewed-by: Dan Carpenter <[email protected]>
Signed-off-by: Martin K. Petersen <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/scsi/qedi/qedi_dbg.c | 32 ++++++++------------------------
1 file changed, 8 insertions(+), 24 deletions(-)
diff --git a/drivers/scsi/qedi/qedi_dbg.c b/drivers/scsi/qedi/qedi_dbg.c
index 8fd28b056f73..3383314a3882 100644
--- a/drivers/scsi/qedi/qedi_dbg.c
+++ b/drivers/scsi/qedi/qedi_dbg.c
@@ -16,10 +16,6 @@ qedi_dbg_err(struct qedi_dbg_ctx *qedi, const char *func, u32 line,
{
va_list va;
struct va_format vaf;
- char nfunc[32];
-
- memset(nfunc, 0, sizeof(nfunc));
- memcpy(nfunc, func, sizeof(nfunc) - 1);
va_start(va, fmt);
@@ -28,9 +24,9 @@ qedi_dbg_err(struct qedi_dbg_ctx *qedi, const char *func, u32 line,
if (likely(qedi) && likely(qedi->pdev))
pr_err("[%s]:[%s:%d]:%d: %pV", dev_name(&qedi->pdev->dev),
- nfunc, line, qedi->host_no, &vaf);
+ func, line, qedi->host_no, &vaf);
else
- pr_err("[0000:00:00.0]:[%s:%d]: %pV", nfunc, line, &vaf);
+ pr_err("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf);
va_end(va);
}
@@ -41,10 +37,6 @@ qedi_dbg_warn(struct qedi_dbg_ctx *qedi, const char *func, u32 line,
{
va_list va;
struct va_format vaf;
- char nfunc[32];
-
- memset(nfunc, 0, sizeof(nfunc));
- memcpy(nfunc, func, sizeof(nfunc) - 1);
va_start(va, fmt);
@@ -56,9 +48,9 @@ qedi_dbg_warn(struct qedi_dbg_ctx *qedi, const char *func, u32 line,
if (likely(qedi) && likely(qedi->pdev))
pr_warn("[%s]:[%s:%d]:%d: %pV", dev_name(&qedi->pdev->dev),
- nfunc, line, qedi->host_no, &vaf);
+ func, line, qedi->host_no, &vaf);
else
- pr_warn("[0000:00:00.0]:[%s:%d]: %pV", nfunc, line, &vaf);
+ pr_warn("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf);
ret:
va_end(va);
@@ -70,10 +62,6 @@ qedi_dbg_notice(struct qedi_dbg_ctx *qedi, const char *func, u32 line,
{
va_list va;
struct va_format vaf;
- char nfunc[32];
-
- memset(nfunc, 0, sizeof(nfunc));
- memcpy(nfunc, func, sizeof(nfunc) - 1);
va_start(va, fmt);
@@ -85,10 +73,10 @@ qedi_dbg_notice(struct qedi_dbg_ctx *qedi, const char *func, u32 line,
if (likely(qedi) && likely(qedi->pdev))
pr_notice("[%s]:[%s:%d]:%d: %pV",
- dev_name(&qedi->pdev->dev), nfunc, line,
+ dev_name(&qedi->pdev->dev), func, line,
qedi->host_no, &vaf);
else
- pr_notice("[0000:00:00.0]:[%s:%d]: %pV", nfunc, line, &vaf);
+ pr_notice("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf);
ret:
va_end(va);
@@ -100,10 +88,6 @@ qedi_dbg_info(struct qedi_dbg_ctx *qedi, const char *func, u32 line,
{
va_list va;
struct va_format vaf;
- char nfunc[32];
-
- memset(nfunc, 0, sizeof(nfunc));
- memcpy(nfunc, func, sizeof(nfunc) - 1);
va_start(va, fmt);
@@ -115,9 +99,9 @@ qedi_dbg_info(struct qedi_dbg_ctx *qedi, const char *func, u32 line,
if (likely(qedi) && likely(qedi->pdev))
pr_info("[%s]:[%s:%d]:%d: %pV", dev_name(&qedi->pdev->dev),
- nfunc, line, qedi->host_no, &vaf);
+ func, line, qedi->host_no, &vaf);
else
- pr_info("[0000:00:00.0]:[%s:%d]: %pV", nfunc, line, &vaf);
+ pr_info("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf);
ret:
va_end(va);
--
2.20.1
[ Upstream commit feb689025fbb6f0aa6297d3ddf97de945ea4ad32 ]
ALSA OSS sequencer calls the ioctl function indirectly via
snd_seq_kernel_client_ctl(). While we already applied the protection
against races between the normal ioctls and writes via the client's
ioctl_mutex, this code path was left untouched. And this seems to be
the cause of still remaining some rare UAF as spontaneously triggered
by syzkaller.
For the sake of robustness, wrap the ioctl_mutex also for the call via
snd_seq_kernel_client_ctl(), too.
Reported-by: [email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/seq/seq_clientmgr.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/sound/core/seq/seq_clientmgr.c b/sound/core/seq/seq_clientmgr.c
index 3bcd7a2f0394..692631bd4a35 100644
--- a/sound/core/seq/seq_clientmgr.c
+++ b/sound/core/seq/seq_clientmgr.c
@@ -2348,14 +2348,19 @@ int snd_seq_kernel_client_ctl(int clientid, unsigned int cmd, void *arg)
{
const struct ioctl_handler *handler;
struct snd_seq_client *client;
+ int err;
client = clientptr(clientid);
if (client == NULL)
return -ENXIO;
for (handler = ioctl_handlers; handler->cmd > 0; ++handler) {
- if (handler->cmd == cmd)
- return handler->func(client, arg);
+ if (handler->cmd == cmd) {
+ mutex_lock(&client->ioctl_mutex);
+ err = handler->func(client, arg);
+ mutex_unlock(&client->ioctl_mutex);
+ return err;
+ }
}
pr_debug("ALSA: seq unknown ioctl() 0x%x (type='%c', number=0x%02x)\n",
--
2.20.1
From: Jason Gerecke <[email protected]>
commit 69dbdfffef20c715df9f381b2cee4e9e0a4efd93 upstream.
The Bluetooth interface of the 2nd-gen Intuos Pro batches together four
independent "frames" of finger data into a single report. Each frame
is essentially equivalent to a single USB report, with the up-to-10
fingers worth of information being spread across two frames. At the
moment the driver only calls `input_sync` after processing all four
frames have been processed, which can result in the driver sending
multiple updates for a single slot within the same SYN_REPORT. This
can confuse userspace, so modify the driver to sync more often if
necessary (i.e., after reporting the state of all fingers).
Fixes: 4922cd26f03c ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
Cc: <[email protected]> # 4.11+
Signed-off-by: Jason Gerecke <[email protected]>
Signed-off-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/wacom_wac.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -1328,11 +1328,17 @@ static void wacom_intuos_pro2_bt_touch(s
if (wacom->num_contacts_left <= 0) {
wacom->num_contacts_left = 0;
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
+ input_sync(touch_input);
}
}
- input_report_switch(touch_input, SW_MUTE_DEVICE, !(data[281] >> 7));
- input_sync(touch_input);
+ if (wacom->num_contacts_left == 0) {
+ // Be careful that we don't accidentally call input_sync with
+ // only a partial set of fingers of processed
+ input_report_switch(touch_input, SW_MUTE_DEVICE, !(data[281] >> 7));
+ input_sync(touch_input);
+ }
+
}
static void wacom_intuos_pro2_bt_pad(struct wacom_wac *wacom)
From: Ville Syrjälä <[email protected]>
commit d74408f528261f900dddb9778f61b5c5a7a6249c upstream.
Our SDVO audio support is pretty bogus. We can't push audio over the
SDVO bus, so trying to enable audio in the SDVO control register doesn't
do anything. In fact it looks like the SDVO encoder will always mix in
the audio coming over HDA, and there's no (at least documented) way to
disable that from our side. So HDMI audio does work currently on gen4
but only by luck really. On gen3 it got broken by the referenced commit.
And what has always been missing on every platform is the ELD.
To pass the ELD to the audio driver we need to write it to magic buffer
in the SDVO encoder hardware which then gets pulled out via HDA in the
other end. Ie. pretty much the same thing we had for native HDMI before
we started to just pass the ELD between the drivers. This sort of
explains why we even have that silly hardware buffer with native HDMI.
$ cat /proc/asound/card0/eld#1.0
-monitor_present 0
-eld_valid 0
+monitor_present 1
+eld_valid 1
+monitor_name LG TV
+connection_type HDMI
+...
This also fixes our state readout since we can now query the SDVO
encoder about the state of the "ELD valid" and "presence detect"
bits. As mentioned those don't actually control whether audio
gets sent over the HDMI cable, but it's the best we can do. And with
the state checker appeased we can re-enable HDMI audio for gen3.
Cc: [email protected]
Cc: Daniel Vetter <[email protected]>
Cc: [email protected]
Tested-by: [email protected]
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108976
Fixes: de44e256b92c ("drm/i915/sdvo: Shut up state checker with hdmi cards on gen3")
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Imre Deak <[email protected]>
(cherry picked from commit dc49a56bd43bb04982e64b44436831da801d0237)
Signed-off-by: Jani Nikula <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/i915/intel_sdvo.c | 58 ++++++++++++++++++++++++++-------
drivers/gpu/drm/i915/intel_sdvo_regs.h | 3 +
2 files changed, 50 insertions(+), 11 deletions(-)
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -928,6 +928,13 @@ static bool intel_sdvo_set_colorimetry(s
return intel_sdvo_set_value(intel_sdvo, SDVO_CMD_SET_COLORIMETRY, &mode, 1);
}
+static bool intel_sdvo_set_audio_state(struct intel_sdvo *intel_sdvo,
+ u8 audio_state)
+{
+ return intel_sdvo_set_value(intel_sdvo, SDVO_CMD_SET_AUDIO_STAT,
+ &audio_state, 1);
+}
+
#if 0
static void intel_sdvo_dump_hdmi_buf(struct intel_sdvo *intel_sdvo)
{
@@ -1359,11 +1366,6 @@ static void intel_sdvo_pre_enable(struct
else
sdvox |= SDVO_PIPE_SEL(crtc->pipe);
- if (crtc_state->has_audio) {
- WARN_ON_ONCE(INTEL_GEN(dev_priv) < 4);
- sdvox |= SDVO_AUDIO_ENABLE;
- }
-
if (INTEL_GEN(dev_priv) >= 4) {
/* done in crtc_mode_set as the dpll_md reg must be written early */
} else if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) ||
@@ -1492,8 +1494,13 @@ static void intel_sdvo_get_config(struct
if (sdvox & HDMI_COLOR_RANGE_16_235)
pipe_config->limited_color_range = true;
- if (sdvox & SDVO_AUDIO_ENABLE)
- pipe_config->has_audio = true;
+ if (intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_AUDIO_STAT,
+ &val, 1)) {
+ u8 mask = SDVO_AUDIO_ELD_VALID | SDVO_AUDIO_PRESENCE_DETECT;
+
+ if ((val & mask) == mask)
+ pipe_config->has_audio = true;
+ }
if (intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ENCODE,
&val, 1)) {
@@ -1506,6 +1513,32 @@ static void intel_sdvo_get_config(struct
pipe_config->pixel_multiplier, encoder_pixel_multiplier);
}
+static void intel_sdvo_disable_audio(struct intel_sdvo *intel_sdvo)
+{
+ intel_sdvo_set_audio_state(intel_sdvo, 0);
+}
+
+static void intel_sdvo_enable_audio(struct intel_sdvo *intel_sdvo,
+ const struct intel_crtc_state *crtc_state,
+ const struct drm_connector_state *conn_state)
+{
+ const struct drm_display_mode *adjusted_mode =
+ &crtc_state->base.adjusted_mode;
+ struct drm_connector *connector = conn_state->connector;
+ u8 *eld = connector->eld;
+
+ eld[6] = drm_av_sync_delay(connector, adjusted_mode) / 2;
+
+ intel_sdvo_set_audio_state(intel_sdvo, 0);
+
+ intel_sdvo_write_infoframe(intel_sdvo, SDVO_HBUF_INDEX_ELD,
+ SDVO_HBUF_TX_DISABLED,
+ eld, drm_eld_size(eld));
+
+ intel_sdvo_set_audio_state(intel_sdvo, SDVO_AUDIO_ELD_VALID |
+ SDVO_AUDIO_PRESENCE_DETECT);
+}
+
static void intel_disable_sdvo(struct intel_encoder *encoder,
struct intel_crtc_state *old_crtc_state,
struct drm_connector_state *conn_state)
@@ -1515,6 +1548,9 @@ static void intel_disable_sdvo(struct in
struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
u32 temp;
+ if (old_crtc_state->has_audio)
+ intel_sdvo_disable_audio(intel_sdvo);
+
intel_sdvo_set_active_outputs(intel_sdvo, 0);
if (0)
intel_sdvo_set_encoder_power_state(intel_sdvo,
@@ -1598,6 +1634,9 @@ static void intel_enable_sdvo(struct int
intel_sdvo_set_encoder_power_state(intel_sdvo,
DRM_MODE_DPMS_ON);
intel_sdvo_set_active_outputs(intel_sdvo, intel_sdvo->attached_output);
+
+ if (pipe_config->has_audio)
+ intel_sdvo_enable_audio(intel_sdvo, pipe_config, conn_state);
}
static enum drm_mode_status
@@ -2468,7 +2507,6 @@ static bool
intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device)
{
struct drm_encoder *encoder = &intel_sdvo->base.base;
- struct drm_i915_private *dev_priv = to_i915(encoder->dev);
struct drm_connector *connector;
struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
struct intel_connector *intel_connector;
@@ -2504,9 +2542,7 @@ intel_sdvo_dvi_init(struct intel_sdvo *i
encoder->encoder_type = DRM_MODE_ENCODER_TMDS;
connector->connector_type = DRM_MODE_CONNECTOR_DVID;
- /* gen3 doesn't do the hdmi bits in the SDVO register */
- if (INTEL_GEN(dev_priv) >= 4 &&
- intel_sdvo_is_hdmi_connector(intel_sdvo, device)) {
+ if (intel_sdvo_is_hdmi_connector(intel_sdvo, device)) {
connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
intel_sdvo->is_hdmi = true;
}
--- a/drivers/gpu/drm/i915/intel_sdvo_regs.h
+++ b/drivers/gpu/drm/i915/intel_sdvo_regs.h
@@ -707,6 +707,9 @@ struct intel_sdvo_enhancements_arg {
#define SDVO_CMD_GET_AUDIO_ENCRYPT_PREFER 0x90
#define SDVO_CMD_SET_AUDIO_STAT 0x91
#define SDVO_CMD_GET_AUDIO_STAT 0x92
+ #define SDVO_AUDIO_ELD_VALID (1 << 0)
+ #define SDVO_AUDIO_PRESENCE_DETECT (1 << 1)
+ #define SDVO_AUDIO_CP_READY (1 << 2)
#define SDVO_CMD_SET_HBUF_INDEX 0x93
#define SDVO_HBUF_INDEX_ELD 0
#define SDVO_HBUF_INDEX_AVI_IF 1
From: Thomas Backlund <[email protected]>
Not-entirely-upstream-sha1-but-equivalent: bed2dd8421
("drm/ttm: Quick-test mmap offset in ttm_bo_mmap()")
Setting CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=n (added by commit: b30a43ac7132)
causes the build to fail with:
ERROR: "drm_legacy_mmap" [drivers/gpu/drm/nouveau/nouveau.ko] undefined!
This does not happend upstream as the offending code got removed in:
bed2dd8421 ("drm/ttm: Quick-test mmap offset in ttm_bo_mmap()")
Fix that by adding check for CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT around
the drm_legacy_mmap() call.
Also, as Sven Joachim pointed out, we need to make the check in
CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=n case return -EINVAL as its done
for basically all other gpu drivers, especially in upstream kernels
drivers/gpu/drm/ttm/ttm_bo_vm.c as of the upstream commit bed2dd8421.
NOTE. This is a minimal stable-only fix for trees where b30a43ac7132 is
backported as the build error affects nouveau only.
Fixes: b30a43ac7132 ("drm/nouveau: add kconfig option to turn off nouveau
legacy contexts. (v3)")
Signed-off-by: Thomas Backlund <[email protected]>
Cc: [email protected]
Cc: Daniel Vetter <[email protected]>
Cc: Sven Joachim <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/nouveau/nouveau_ttm.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/gpu/drm/nouveau/nouveau_ttm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_ttm.c
@@ -273,7 +273,11 @@ nouveau_ttm_mmap(struct file *filp, stru
struct nouveau_drm *drm = nouveau_drm(file_priv->minor->dev);
if (unlikely(vma->vm_pgoff < DRM_FILE_PAGE_OFFSET))
+#if defined(CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT)
return drm_legacy_mmap(filp, vma);
+#else
+ return -EINVAL;
+#endif
return ttm_bo_mmap(filp, vma, &drm->ttm.bdev);
}
From: Russell King <[email protected]>
commit ca21f851cc9643af049226d57fabc3c883ea648e upstream.
The Acorn i2c driver (for RiscPC) triggers the "i2c adapter has no name"
warning in the I2C core driver, resulting in the RTC being inaccessible.
Fix this.
Fixes: 2236baa75f70 ("i2c: Sanity checks on adapter registration")
Signed-off-by: Russell King <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Cc: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/i2c/busses/i2c-acorn.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -83,6 +83,7 @@ static struct i2c_algo_bit_data ioc_data
static struct i2c_adapter ioc_ops = {
.nr = 0,
+ .name = "ioc",
.algo_data = &ioc_data,
};
From: Takashi Sakamoto <[email protected]>
commit 0e3fb6995bfabb23c172e8b883bf5ac57102678e upstream.
The data for isochronous resources is not destroyed in expected place.
This commit fixes the bug.
Cc: <[email protected]> # v4.12+
Fixes: 9b2bb4f2f4a2 ("ALSA: firewire-motu: add stream management functionality")
Signed-off-by: Takashi Sakamoto <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/firewire/motu/motu-stream.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/sound/firewire/motu/motu-stream.c
+++ b/sound/firewire/motu/motu-stream.c
@@ -345,7 +345,7 @@ static void destroy_stream(struct snd_mo
}
amdtp_stream_destroy(stream);
- fw_iso_resources_free(resources);
+ fw_iso_resources_destroy(resources);
}
int snd_motu_stream_init_duplex(struct snd_motu *motu)
From: Tejun Heo <[email protected]>
commit 18fa84a2db0e15b02baa5d94bdb5bd509175d2f6 upstream.
A PF_EXITING task can stay associated with an offline css. If such
task calls task_get_css(), it can get stuck indefinitely. This can be
triggered by BSD process accounting which writes to a file with
PF_EXITING set when racing against memcg disable as in the backtrace
at the end.
After this change, task_get_css() may return a css which was already
offline when the function was called. None of the existing users are
affected by this change.
INFO: rcu_sched self-detected stall on CPU
INFO: rcu_sched detected stalls on CPUs/tasks:
...
NMI backtrace for cpu 0
...
Call Trace:
<IRQ>
dump_stack+0x46/0x68
nmi_cpu_backtrace.cold.2+0x13/0x57
nmi_trigger_cpumask_backtrace+0xba/0xca
rcu_dump_cpu_stacks+0x9e/0xce
rcu_check_callbacks.cold.74+0x2af/0x433
update_process_times+0x28/0x60
tick_sched_timer+0x34/0x70
__hrtimer_run_queues+0xee/0x250
hrtimer_interrupt+0xf4/0x210
smp_apic_timer_interrupt+0x56/0x110
apic_timer_interrupt+0xf/0x20
</IRQ>
RIP: 0010:balance_dirty_pages_ratelimited+0x28f/0x3d0
...
btrfs_file_write_iter+0x31b/0x563
__vfs_write+0xfa/0x140
__kernel_write+0x4f/0x100
do_acct_process+0x495/0x580
acct_process+0xb9/0xdb
do_exit+0x748/0xa00
do_group_exit+0x3a/0xa0
get_signal+0x254/0x560
do_signal+0x23/0x5c0
exit_to_usermode_loop+0x5d/0xa0
prepare_exit_to_usermode+0x53/0x80
retint_user+0x8/0x8
Signed-off-by: Tejun Heo <[email protected]>
Cc: [email protected] # v4.2+
Fixes: ec438699a9ae ("cgroup, block: implement task_get_css() and use it in bio_associate_current()")
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/cgroup.h | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -484,7 +484,7 @@ static inline struct cgroup_subsys_state
*
* Find the css for the (@task, @subsys_id) combination, increment a
* reference on and return it. This function is guaranteed to return a
- * valid css.
+ * valid css. The returned css may already have been offlined.
*/
static inline struct cgroup_subsys_state *
task_get_css(struct task_struct *task, int subsys_id)
@@ -494,7 +494,13 @@ task_get_css(struct task_struct *task, i
rcu_read_lock();
while (true) {
css = task_css(task, subsys_id);
- if (likely(css_tryget_online(css)))
+ /*
+ * Can't use css_tryget_online() here. A task which has
+ * PF_EXITING set may stay associated with an offline css.
+ * If such task calls this function, css_tryget_online()
+ * will keep failing.
+ */
+ if (likely(css_tryget(css)))
break;
cpu_relax();
}
From: Kai-Heng Feng <[email protected]>
commit 1a6dd3fea131276a4fc44ae77b0f471b0b473577 upstream.
There is one more Realtek card reader requires ums-realtek to work
correctly.
Add the device ID to support it.
Signed-off-by: Kai-Heng Feng <[email protected]>
Cc: stable <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/usb/storage/unusual_realtek.h | 5 +++++
1 file changed, 5 insertions(+)
--- a/drivers/usb/storage/unusual_realtek.h
+++ b/drivers/usb/storage/unusual_realtek.h
@@ -29,6 +29,11 @@ UNUSUAL_DEV(0x0bda, 0x0138, 0x0000, 0x99
"USB Card Reader",
USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+UNUSUAL_DEV(0x0bda, 0x0153, 0x0000, 0x9999,
+ "Realtek",
+ "USB Card Reader",
+ USB_SC_DEVICE, USB_PR_DEVICE, init_realtek_cr, 0),
+
UNUSUAL_DEV(0x0bda, 0x0158, 0x0000, 0x9999,
"Realtek",
"USB Card Reader",
From: Murray McAllister <[email protected]>
commit bcd6aa7b6cbfd6f985f606c6f76046d782905820 upstream.
If SVGA_3D_CMD_DX_DEFINE_RENDERTARGET_VIEW is called with a surface
ID of SVGA3D_INVALID_ID, the srf struct will remain NULL after
vmw_cmd_res_check(), leading to a null pointer dereference in
vmw_view_add().
Cc: <[email protected]>
Fixes: d80efd5cb3de ("drm/vmwgfx: Initial DX support")
Signed-off-by: Murray McAllister <[email protected]>
Reviewed-by: Thomas Hellstrom <[email protected]>
Signed-off-by: Thomas Hellstrom <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
+++ b/drivers/gpu/drm/vmwgfx/vmwgfx_execbuf.c
@@ -2735,6 +2735,10 @@ static int vmw_cmd_dx_view_define(struct
if (view_type == vmw_view_max)
return -EINVAL;
cmd = container_of(header, typeof(*cmd), header);
+ if (unlikely(cmd->sid == SVGA3D_INVALID_ID)) {
+ DRM_ERROR("Invalid surface id.\n");
+ return -EINVAL;
+ }
ret = vmw_cmd_res_check(dev_priv, sw_context, vmw_res_surface,
user_surface_converter,
&cmd->sid, &srf_node);
[ Upstream commit 2eabc5ec8ab4d4748a82050dfcb994119b983750 ]
The snd_seq_ioctl_get_subscription() retrieves the port subscriber
information as a pointer, while the object isn't protected, hence it
may be deleted before the actual reference. This race was spotted by
syzkaller and may lead to a UAF.
The fix is simply copying the data in the lookup function that
performs in the rwsem to protect against the deletion.
Reported-by: [email protected]
Signed-off-by: Takashi Iwai <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
sound/core/seq/seq_clientmgr.c | 10 ++--------
sound/core/seq/seq_ports.c | 13 ++++++++-----
sound/core/seq/seq_ports.h | 5 +++--
3 files changed, 13 insertions(+), 15 deletions(-)
diff --git a/sound/core/seq/seq_clientmgr.c b/sound/core/seq/seq_clientmgr.c
index 692631bd4a35..068880ac47b5 100644
--- a/sound/core/seq/seq_clientmgr.c
+++ b/sound/core/seq/seq_clientmgr.c
@@ -1904,20 +1904,14 @@ static int snd_seq_ioctl_get_subscription(struct snd_seq_client *client,
int result;
struct snd_seq_client *sender = NULL;
struct snd_seq_client_port *sport = NULL;
- struct snd_seq_subscribers *p;
result = -EINVAL;
if ((sender = snd_seq_client_use_ptr(subs->sender.client)) == NULL)
goto __end;
if ((sport = snd_seq_port_use_ptr(sender, subs->sender.port)) == NULL)
goto __end;
- p = snd_seq_port_get_subscription(&sport->c_src, &subs->dest);
- if (p) {
- result = 0;
- *subs = p->info;
- } else
- result = -ENOENT;
-
+ result = snd_seq_port_get_subscription(&sport->c_src, &subs->dest,
+ subs);
__end:
if (sport)
snd_seq_port_unlock(sport);
diff --git a/sound/core/seq/seq_ports.c b/sound/core/seq/seq_ports.c
index d3fc73ac230b..c8fa4336bccd 100644
--- a/sound/core/seq/seq_ports.c
+++ b/sound/core/seq/seq_ports.c
@@ -635,20 +635,23 @@ int snd_seq_port_disconnect(struct snd_seq_client *connector,
/* get matched subscriber */
-struct snd_seq_subscribers *snd_seq_port_get_subscription(struct snd_seq_port_subs_info *src_grp,
- struct snd_seq_addr *dest_addr)
+int snd_seq_port_get_subscription(struct snd_seq_port_subs_info *src_grp,
+ struct snd_seq_addr *dest_addr,
+ struct snd_seq_port_subscribe *subs)
{
- struct snd_seq_subscribers *s, *found = NULL;
+ struct snd_seq_subscribers *s;
+ int err = -ENOENT;
down_read(&src_grp->list_mutex);
list_for_each_entry(s, &src_grp->list_head, src_list) {
if (addr_match(dest_addr, &s->info.dest)) {
- found = s;
+ *subs = s->info;
+ err = 0;
break;
}
}
up_read(&src_grp->list_mutex);
- return found;
+ return err;
}
/*
diff --git a/sound/core/seq/seq_ports.h b/sound/core/seq/seq_ports.h
index 26bd71f36c41..06003b36652e 100644
--- a/sound/core/seq/seq_ports.h
+++ b/sound/core/seq/seq_ports.h
@@ -135,7 +135,8 @@ int snd_seq_port_subscribe(struct snd_seq_client_port *port,
struct snd_seq_port_subscribe *info);
/* get matched subscriber */
-struct snd_seq_subscribers *snd_seq_port_get_subscription(struct snd_seq_port_subs_info *src_grp,
- struct snd_seq_addr *dest_addr);
+int snd_seq_port_get_subscription(struct snd_seq_port_subs_info *src_grp,
+ struct snd_seq_addr *dest_addr,
+ struct snd_seq_port_subscribe *subs);
#endif
--
2.20.1
[ Upstream commit fe48319243a626c860fd666ca032daacc2ba84a5 ]
When running under a pipe, some timer tests would not report output in
real-time because stdout flushes were missing after printf()s that lacked
a newline. This adds them to restore real-time status output that humans
can enjoy.
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
tools/testing/selftests/timers/adjtick.c | 1 +
tools/testing/selftests/timers/leapcrash.c | 1 +
tools/testing/selftests/timers/mqueue-lat.c | 1 +
tools/testing/selftests/timers/nanosleep.c | 1 +
tools/testing/selftests/timers/nsleep-lat.c | 1 +
tools/testing/selftests/timers/raw_skew.c | 1 +
tools/testing/selftests/timers/set-tai.c | 1 +
tools/testing/selftests/timers/set-tz.c | 2 ++
tools/testing/selftests/timers/threadtest.c | 1 +
tools/testing/selftests/timers/valid-adjtimex.c | 2 ++
10 files changed, 12 insertions(+)
diff --git a/tools/testing/selftests/timers/adjtick.c b/tools/testing/selftests/timers/adjtick.c
index 0caca3a06bd2..54d8d87f36b3 100644
--- a/tools/testing/selftests/timers/adjtick.c
+++ b/tools/testing/selftests/timers/adjtick.c
@@ -136,6 +136,7 @@ int check_tick_adj(long tickval)
eppm = get_ppm_drift();
printf("%lld usec, %lld ppm", systick + (systick * eppm / MILLION), eppm);
+ fflush(stdout);
tx1.modes = 0;
adjtimex(&tx1);
diff --git a/tools/testing/selftests/timers/leapcrash.c b/tools/testing/selftests/timers/leapcrash.c
index 830c462f605d..dc80728ed191 100644
--- a/tools/testing/selftests/timers/leapcrash.c
+++ b/tools/testing/selftests/timers/leapcrash.c
@@ -101,6 +101,7 @@ int main(void)
}
clear_time_state();
printf(".");
+ fflush(stdout);
}
printf("[OK]\n");
return ksft_exit_pass();
diff --git a/tools/testing/selftests/timers/mqueue-lat.c b/tools/testing/selftests/timers/mqueue-lat.c
index 1867db5d6f5e..7916cf5cc6ff 100644
--- a/tools/testing/selftests/timers/mqueue-lat.c
+++ b/tools/testing/selftests/timers/mqueue-lat.c
@@ -102,6 +102,7 @@ int main(int argc, char **argv)
int ret;
printf("Mqueue latency : ");
+ fflush(stdout);
ret = mqueue_lat_test();
if (ret < 0) {
diff --git a/tools/testing/selftests/timers/nanosleep.c b/tools/testing/selftests/timers/nanosleep.c
index 8adb0bb51d4d..71b5441c2fd9 100644
--- a/tools/testing/selftests/timers/nanosleep.c
+++ b/tools/testing/selftests/timers/nanosleep.c
@@ -142,6 +142,7 @@ int main(int argc, char **argv)
continue;
printf("Nanosleep %-31s ", clockstring(clockid));
+ fflush(stdout);
length = 10;
while (length <= (NSEC_PER_SEC * 10)) {
diff --git a/tools/testing/selftests/timers/nsleep-lat.c b/tools/testing/selftests/timers/nsleep-lat.c
index c3c3dc10db17..eb3e79ed7b4a 100644
--- a/tools/testing/selftests/timers/nsleep-lat.c
+++ b/tools/testing/selftests/timers/nsleep-lat.c
@@ -155,6 +155,7 @@ int main(int argc, char **argv)
continue;
printf("nsleep latency %-26s ", clockstring(clockid));
+ fflush(stdout);
length = 10;
while (length <= (NSEC_PER_SEC * 10)) {
diff --git a/tools/testing/selftests/timers/raw_skew.c b/tools/testing/selftests/timers/raw_skew.c
index dcf73c5dab6e..b41d8dd0c40c 100644
--- a/tools/testing/selftests/timers/raw_skew.c
+++ b/tools/testing/selftests/timers/raw_skew.c
@@ -112,6 +112,7 @@ int main(int argv, char **argc)
printf("WARNING: ADJ_OFFSET in progress, this will cause inaccurate results\n");
printf("Estimating clock drift: ");
+ fflush(stdout);
sleep(120);
get_monotonic_and_raw(&mon, &raw);
diff --git a/tools/testing/selftests/timers/set-tai.c b/tools/testing/selftests/timers/set-tai.c
index 70fed27d8fd3..8c4179ee2ca2 100644
--- a/tools/testing/selftests/timers/set-tai.c
+++ b/tools/testing/selftests/timers/set-tai.c
@@ -55,6 +55,7 @@ int main(int argc, char **argv)
printf("tai offset started at %i\n", ret);
printf("Checking tai offsets can be properly set: ");
+ fflush(stdout);
for (i = 1; i <= 60; i++) {
ret = set_tai(i);
ret = get_tai();
diff --git a/tools/testing/selftests/timers/set-tz.c b/tools/testing/selftests/timers/set-tz.c
index 877fd5532fee..62bd33eb16f0 100644
--- a/tools/testing/selftests/timers/set-tz.c
+++ b/tools/testing/selftests/timers/set-tz.c
@@ -65,6 +65,7 @@ int main(int argc, char **argv)
printf("tz_minuteswest started at %i, dst at %i\n", min, dst);
printf("Checking tz_minuteswest can be properly set: ");
+ fflush(stdout);
for (i = -15*60; i < 15*60; i += 30) {
ret = set_tz(i, dst);
ret = get_tz_min();
@@ -76,6 +77,7 @@ int main(int argc, char **argv)
printf("[OK]\n");
printf("Checking invalid tz_minuteswest values are caught: ");
+ fflush(stdout);
if (!set_tz(-15*60-1, dst)) {
printf("[FAILED] %i didn't return failure!\n", -15*60-1);
diff --git a/tools/testing/selftests/timers/threadtest.c b/tools/testing/selftests/timers/threadtest.c
index 759c9c06f1a0..cf3e48919874 100644
--- a/tools/testing/selftests/timers/threadtest.c
+++ b/tools/testing/selftests/timers/threadtest.c
@@ -163,6 +163,7 @@ int main(int argc, char **argv)
strftime(buf, 255, "%a, %d %b %Y %T %z", localtime(&start));
printf("%s\n", buf);
printf("Testing consistency with %i threads for %ld seconds: ", thread_count, runtime);
+ fflush(stdout);
/* spawn */
for (i = 0; i < thread_count; i++)
diff --git a/tools/testing/selftests/timers/valid-adjtimex.c b/tools/testing/selftests/timers/valid-adjtimex.c
index d9d3ab93b31a..5397de708d3c 100644
--- a/tools/testing/selftests/timers/valid-adjtimex.c
+++ b/tools/testing/selftests/timers/valid-adjtimex.c
@@ -123,6 +123,7 @@ int validate_freq(void)
/* Set the leap second insert flag */
printf("Testing ADJ_FREQ... ");
+ fflush(stdout);
for (i = 0; i < NUM_FREQ_VALID; i++) {
tx.modes = ADJ_FREQUENCY;
tx.freq = valid_freq[i];
@@ -250,6 +251,7 @@ int set_bad_offset(long sec, long usec, int use_nano)
int validate_set_offset(void)
{
printf("Testing ADJ_SETOFFSET... ");
+ fflush(stdout);
/* Test valid values */
if (set_offset(NSEC_PER_SEC - 1, 1))
--
2.20.1
From: Jann Horn <[email protected]>
commit f6581f5b55141a95657ef5742cf6a6bfa20a109f upstream.
Restore the read memory barrier in __ptrace_may_access() that was deleted
a couple years ago. Also add comments on this barrier and the one it pairs
with to explain why they're there (as far as I understand).
Fixes: bfedb589252c ("mm: Add a user_ns owner to mm_struct and fix ptrace permission checks")
Cc: [email protected]
Acked-by: Kees Cook <[email protected]>
Acked-by: Oleg Nesterov <[email protected]>
Signed-off-by: Jann Horn <[email protected]>
Signed-off-by: Eric W. Biederman <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/cred.c | 9 +++++++++
kernel/ptrace.c | 10 ++++++++++
2 files changed, 19 insertions(+)
--- a/kernel/cred.c
+++ b/kernel/cred.c
@@ -448,6 +448,15 @@ int commit_creds(struct cred *new)
if (task->mm)
set_dumpable(task->mm, suid_dumpable);
task->pdeath_signal = 0;
+ /*
+ * If a task drops privileges and becomes nondumpable,
+ * the dumpability change must become visible before
+ * the credential change; otherwise, a __ptrace_may_access()
+ * racing with this change may be able to attach to a task it
+ * shouldn't be able to attach to (as if the task had dropped
+ * privileges without becoming nondumpable).
+ * Pairs with a read barrier in __ptrace_may_access().
+ */
smp_wmb();
}
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -323,6 +323,16 @@ static int __ptrace_may_access(struct ta
return -EPERM;
ok:
rcu_read_unlock();
+ /*
+ * If a task drops privileges and becomes nondumpable (through a syscall
+ * like setresuid()) while we are trying to access it, we must ensure
+ * that the dumpability is read after the credentials; otherwise,
+ * we may be able to attach to a task that we shouldn't be able to
+ * attach to (as if the task had dropped privileges without becoming
+ * nondumpable).
+ * Pairs with a write barrier in commit_creds().
+ */
+ smp_rmb();
mm = task->mm;
if (mm &&
((get_dumpable(mm) != SUID_DUMP_USER) &&
From: Shakeel Butt <[email protected]>
commit 3510955b327176fd4cbab5baa75b449f077722a2 upstream.
Syzbot reported following memory leak:
ffffffffda RBX: 0000000000000003 RCX: 0000000000441f79
BUG: memory leak
unreferenced object 0xffff888114f26040 (size 32):
comm "syz-executor626", pid 7056, jiffies 4294948701 (age 39.410s)
hex dump (first 32 bytes):
40 60 f2 14 81 88 ff ff 40 60 f2 14 81 88 ff ff @`......@`......
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
slab_post_alloc_hook mm/slab.h:439 [inline]
slab_alloc mm/slab.c:3326 [inline]
kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
kmalloc include/linux/slab.h:547 [inline]
__memcg_init_list_lru_node+0x58/0xf0 mm/list_lru.c:352
memcg_init_list_lru_node mm/list_lru.c:375 [inline]
memcg_init_list_lru mm/list_lru.c:459 [inline]
__list_lru_init+0x193/0x2a0 mm/list_lru.c:626
alloc_super+0x2e0/0x310 fs/super.c:269
sget_userns+0x94/0x2a0 fs/super.c:609
sget+0x8d/0xb0 fs/super.c:660
mount_nodev+0x31/0xb0 fs/super.c:1387
fuse_mount+0x2d/0x40 fs/fuse/inode.c:1236
legacy_get_tree+0x27/0x80 fs/fs_context.c:661
vfs_get_tree+0x2e/0x120 fs/super.c:1476
do_new_mount fs/namespace.c:2790 [inline]
do_mount+0x932/0xc50 fs/namespace.c:3110
ksys_mount+0xab/0x120 fs/namespace.c:3319
__do_sys_mount fs/namespace.c:3333 [inline]
__se_sys_mount fs/namespace.c:3330 [inline]
__x64_sys_mount+0x26/0x30 fs/namespace.c:3330
do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This is a simple off by one bug on the error path.
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 60d3fd32a7a9 ("list_lru: introduce per-memcg lists")
Reported-by: [email protected]
Signed-off-by: Shakeel Butt <[email protected]>
Acked-by: Michal Hocko <[email protected]>
Reviewed-by: Kirill Tkhai <[email protected]>
Cc: <[email protected]> [4.0+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
mm/list_lru.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/mm/list_lru.c
+++ b/mm/list_lru.c
@@ -313,7 +313,7 @@ static int __memcg_init_list_lru_node(st
}
return 0;
fail:
- __memcg_destroy_list_lru_node(memcg_lrus, begin, i - 1);
+ __memcg_destroy_list_lru_node(memcg_lrus, begin, i);
return -ENOMEM;
}
From: S.j. Wang <[email protected]>
commit ad6eecbfc01c987e0253371f274c3872042e4350 upstream.
Add regcache_mark_dirty before regcache_sync for power
of codec may be lost at suspend, then all the register
need to be reconfigured.
Fixes: 0c516b4ff85c ("ASoC: cs42xx8: Add codec driver
support for CS42448/CS42888")
Cc: <[email protected]>
Signed-off-by: Shengjiu Wang <[email protected]>
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/soc/codecs/cs42xx8.c | 1 +
1 file changed, 1 insertion(+)
--- a/sound/soc/codecs/cs42xx8.c
+++ b/sound/soc/codecs/cs42xx8.c
@@ -559,6 +559,7 @@ static int cs42xx8_runtime_resume(struct
msleep(5);
regcache_cache_only(cs42xx8->regmap, false);
+ regcache_mark_dirty(cs42xx8->regmap);
ret = regcache_sync(cs42xx8->regmap);
if (ret) {
[ Upstream commit f6e2aa91a46d2bc79fce9b93a988dbe7655c90c0 ]
Recently syzbot in conjunction with KMSAN reported that
ptrace_peek_siginfo can copy an uninitialized siginfo to userspace.
Inspecting ptrace_peek_siginfo confirms this.
The problem is that off when initialized from args.off can be
initialized to a negaive value. At which point the "if (off >= 0)"
test to see if off became negative fails because off started off
negative.
Prevent the core problem by adding a variable found that is only true
if a siginfo is found and copied to a temporary in preparation for
being copied to userspace.
Prevent args.off from being truncated when being assigned to off by
testing that off is <= the maximum possible value of off. Convert off
to an unsigned long so that we should not have to truncate args.off,
we have well defined overflow behavior so if we add another check we
won't risk fighting undefined compiler behavior, and so that we have a
type whose maximum value is easy to test for.
Cc: Andrei Vagin <[email protected]>
Cc: [email protected]
Reported-by: [email protected]
Fixes: 84c751bd4aeb ("ptrace: add ability to retrieve signals without removing from a queue (v4)")
Signed-off-by: "Eric W. Biederman" <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/ptrace.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index f1c85b6c39ae..f6b452e3c204 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -704,6 +704,10 @@ static int ptrace_peek_siginfo(struct task_struct *child,
if (arg.nr < 0)
return -EINVAL;
+ /* Ensure arg.off fits in an unsigned long */
+ if (arg.off > ULONG_MAX)
+ return 0;
+
if (arg.flags & PTRACE_PEEKSIGINFO_SHARED)
pending = &child->signal->shared_pending;
else
@@ -711,18 +715,20 @@ static int ptrace_peek_siginfo(struct task_struct *child,
for (i = 0; i < arg.nr; ) {
siginfo_t info;
- s32 off = arg.off + i;
+ unsigned long off = arg.off + i;
+ bool found = false;
spin_lock_irq(&child->sighand->siglock);
list_for_each_entry(q, &pending->list, list) {
if (!off--) {
+ found = true;
copy_siginfo(&info, &q->info);
break;
}
}
spin_unlock_irq(&child->sighand->siglock);
- if (off >= 0) /* beyond the end of the list */
+ if (!found) /* beyond the end of the list */
break;
#ifdef CONFIG_COMPAT
--
2.20.1
stable-rc/linux-4.14.y boot: 105 boots: 0 failed, 105 passed (v4.14.127-54-g1ed3ad23f285)
Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.14.y/kernel/v4.14.127-54-g1ed3ad23f285/
Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.14.y/kernel/v4.14.127-54-g1ed3ad23f285/
Tree: stable-rc
Branch: linux-4.14.y
Git Describe: v4.14.127-54-g1ed3ad23f285
Git Commit: 1ed3ad23f2853e59a94e55528b42112d3e00c842
Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
Tested: 59 unique boards, 24 SoC families, 15 builds out of 201
---
For more info write to <[email protected]>
On Tue, 18 Jun 2019 at 02:58, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.14.128 release.
> There are 53 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed 19 Jun 2019 09:06:21 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.128-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
NOTE:
Backported patch media: v4l2-ioctl: clear fields in s_parm
fixed v4l2-compliance test case VIDIOC_G-S_PARM
Summary
------------------------------------------------------------------------
kernel: 4.14.128-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.14.y
git commit: 16102d7ed8409bff0d3b105d08bb2ca26343c539
git describe: v4.14.127-54-g16102d7ed840
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.14-oe/build/v4.14.127-54-g16102d7ed840
No regressions (compared to build v4.14.127)
Fixes (compared to build v4.14.127)
------------------------------------------------------------------------
v4l2-compliance:
* VIDIOC_G-S_PARM
Ran 22198 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-timers-tests
* network-basic-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-open-posix-tests
* kvm-unit-tests
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
On 6/17/19 3:09 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.128 release.
> There are 53 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed 19 Jun 2019 09:06:21 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.128-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On Mon, Jun 17, 2019 at 11:09:43PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.128 release.
> There are 53 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed 19 Jun 2019 09:06:21 PM UTC.
> Anything received after that time might be too late.
>
Build results:
total: 172 pass: 172 fail: 0
Qemu test results:
total: 348 pass: 348 fail: 0
Guenter
On 17/06/2019 22:09, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.14.128 release.
> There are 53 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Wed 19 Jun 2019 09:06:21 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.128-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
I am still waiting on the test results for 4.14-128-rc1. The builds are
all passing, but waiting for the tests to complete. We have been having
some issues with our test farm this week and so the results are delayed,
but should be available later today, I hope.
Cheers
Jon
--
nvpublic
On Wed, Jun 19, 2019 at 09:49:00AM +0100, Jon Hunter wrote:
>
> On 17/06/2019 22:09, Greg Kroah-Hartman wrote:
> > This is the start of the stable review cycle for the 4.14.128 release.
> > There are 53 patches in this series, all will be posted as a response
> > to this one. If anyone has any issues with these being applied, please
> > let me know.
> >
> > Responses should be made by Wed 19 Jun 2019 09:06:21 PM UTC.
> > Anything received after that time might be too late.
> >
> > The whole patch series can be found in one patch at:
> > https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.128-rc1.gz
> > or in the git tree and branch at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> > and the diffstat can be found below.
> >
> > thanks,
> >
> > greg k-h
>
> I am still waiting on the test results for 4.14-128-rc1. The builds are
> all passing, but waiting for the tests to complete. We have been having
> some issues with our test farm this week and so the results are delayed,
> but should be available later today, I hope.
No worries, thanks for testing all of these and letting me know.
greg k-h
On 19/06/2019 11:46, Greg Kroah-Hartman wrote:
> On Wed, Jun 19, 2019 at 09:49:00AM +0100, Jon Hunter wrote:
>>
>> On 17/06/2019 22:09, Greg Kroah-Hartman wrote:
>>> This is the start of the stable review cycle for the 4.14.128 release.
>>> There are 53 patches in this series, all will be posted as a response
>>> to this one. If anyone has any issues with these being applied, please
>>> let me know.
>>>
>>> Responses should be made by Wed 19 Jun 2019 09:06:21 PM UTC.
>>> Anything received after that time might be too late.
>>>
>>> The whole patch series can be found in one patch at:
>>> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.128-rc1.gz
>>> or in the git tree and branch at:
>>> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
>>> and the diffstat can be found below.
>>>
>>> thanks,
>>>
>>> greg k-h
>>
>> I am still waiting on the test results for 4.14-128-rc1. The builds are
>> all passing, but waiting for the tests to complete. We have been having
>> some issues with our test farm this week and so the results are delayed,
>> but should be available later today, I hope.
>
> No worries, thanks for testing all of these and letting me know.
All tests passing for Tegra ...
Test results for stable-v4.14:
8 builds: 8 pass, 0 fail
16 boots: 16 pass, 0 fail
24 tests: 24 pass, 0 fail
Linux version: 4.14.128-rc1-g16102d7ed840
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On Wed, Jun 19, 2019 at 02:30:51PM +0100, Jon Hunter wrote:
>
> On 19/06/2019 11:46, Greg Kroah-Hartman wrote:
> > On Wed, Jun 19, 2019 at 09:49:00AM +0100, Jon Hunter wrote:
> >>
> >> On 17/06/2019 22:09, Greg Kroah-Hartman wrote:
> >>> This is the start of the stable review cycle for the 4.14.128 release.
> >>> There are 53 patches in this series, all will be posted as a response
> >>> to this one. If anyone has any issues with these being applied, please
> >>> let me know.
> >>>
> >>> Responses should be made by Wed 19 Jun 2019 09:06:21 PM UTC.
> >>> Anything received after that time might be too late.
> >>>
> >>> The whole patch series can be found in one patch at:
> >>> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.14.128-rc1.gz
> >>> or in the git tree and branch at:
> >>> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.14.y
> >>> and the diffstat can be found below.
> >>>
> >>> thanks,
> >>>
> >>> greg k-h
> >>
> >> I am still waiting on the test results for 4.14-128-rc1. The builds are
> >> all passing, but waiting for the tests to complete. We have been having
> >> some issues with our test farm this week and so the results are delayed,
> >> but should be available later today, I hope.
> >
> > No worries, thanks for testing all of these and letting me know.
>
> All tests passing for Tegra ...
>
> Test results for stable-v4.14:
> 8 builds: 8 pass, 0 fail
> 16 boots: 16 pass, 0 fail
> 24 tests: 24 pass, 0 fail
>
> Linux version: 4.14.128-rc1-g16102d7ed840
> Boards tested: tegra124-jetson-tk1, tegra20-ventana,
> tegra210-p2371-2180, tegra30-cardhu-a04
Great, thanks!