2019-06-10 16:23:30

by Horia Geanta

Subject: [PATCH] arm64: dts: ls1028a: add crypto node

LS1028A has a SEC v5.0 compatible security engine.

Signed-off-by: Horia Geantă <[email protected]>
---

Tested with "arm-smmu.disable_bypass=0" kernel boot parameter,
since ICID (Isolation Context ID, out of which ARM SMMU stream ID
is derived) programming and DT fix-up support hasn't been added yet
in U-boot.

.../boot/dts/freescale/fsl-ls1028a-qds.dts | 1 +
.../boot/dts/freescale/fsl-ls1028a-rdb.dts | 1 +
.../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 39 +++++++++++++++++++
3 files changed, 41 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 4ed18287e077..c9765bb4bd7f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -17,6 +17,7 @@
compatible = "fsl,ls1028a-qds", "fsl,ls1028a";

aliases {
+ crypto = &crypto;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
index 4a203f7da598..745ec462bfae 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
@@ -16,6 +16,7 @@
compatible = "fsl,ls1028a-rdb", "fsl,ls1028a";

aliases {
+ crypto = &crypto;
serial0 = &duart0;
serial1 = &duart1;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index bb386dd1d1b1..0048c2610a09 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -388,6 +388,45 @@
<GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
};

+ crypto: crypto@8000000 {
+ compatible = "fsl,sec-v5.0", "fsl,sec-v4.0";
+ fsl,sec-era = <10>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x00 0x8000000 0x100000>;
+ reg = <0x00 0x8000000 0x0 0x100000>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ dma-coherent;
+
+ sec_jr0: jr@10000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x10000 0x10000>;
+ interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr@20000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x20000 0x10000>;
+ interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr2: jr@30000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x30000 0x10000>;
+ interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr3: jr@40000 {
+ compatible = "fsl,sec-v5.0-job-ring",
+ "fsl,sec-v4.0-job-ring";
+ reg = <0x40000 0x10000>;
+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
cluster1_core0_watchdog: watchdog@c000000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
--
2.17.1

2019-06-18 06:55:59

by Shawn Guo

Subject: Re: [PATCH] arm64: dts: ls1028a: add crypto node

On Mon, Jun 10, 2019 at 06:23:31PM +0300, Horia Geantă wrote:
> LS1028A has a SEC v5.0 compatible security engine.
>
> Signed-off-by: Horia Geantă <[email protected]>

Applied, thanks.