Arm and arm64 architecture reserve some memory regions prior to the
symbol '_stext' and these memory regions later will be used by device
module and BPF jit. The current code misses to consider these memory
regions thus any address in the regions will be taken as user space
mode, but perf cannot find the corresponding dso with the wrong CPU
mode so we misses to generate samples for device module and BPF
related trace data.
This patch parse the link scripts to get the memory size prior to start
address and reduce this size from 'etmq->etm->kernel_start', then can
get a fixed up kernel start address which contain memory regions for
device module and BPF. Finally, cs_etm__cpu_mode() can return right
mode for these memory regions and perf can successfully generate
samples.
The reason for parsing the link scripts is Arm architecture changes text
offset dependent on different platforms, which define multiple text
offsets in $kernel/arch/arm/Makefile. This offset is decided when build
kernel and the final value is extended in the link script, so we can
extract the used value from the link script. We use the same way to
parse arm64 link script as well. If fail to find the link script, the
pre start memory size is assumed as zero, in this case it has no any
change caused with this patch.
Below is detailed info for testing this patch:
- Build LLVM/Clang 8.0 or later version;
- Configure perf with ~/.perfconfig:
root@debian:~# cat ~/.perfconfig
# this file is auto-generated.
[llvm]
clang-path = /mnt/build/llvm-build/build/install/bin/clang
kbuild-dir = /mnt/linux-kernel/linux-cs-dev/
clang-opt = "-DLINUX_VERSION_CODE=0x50200 -g"
dump-obj = true
[trace]
show_zeros = yes
show_duration = no
no_inherit = yes
show_timestamp = no
show_arg_names = no
args_alignment = 40
show_prefix = yes
- Run 'perf trace' command with eBPF event:
root@debian:~# perf trace -e string \
-e $kernel/tools/perf/examples/bpf/augmented_raw_syscalls.c
- Read eBPF program memory mapping in kernel:
root@debian:~# echo 1 > /proc/sys/net/core/bpf_jit_kallsyms
root@debian:~# cat /proc/kallsyms | grep -E "bpf_prog_.+_sys_[enter|exit]"
ffff000000086a84 t bpf_prog_f173133dc38ccf87_sys_enter [bpf]
ffff000000088618 t bpf_prog_c1bd85c092d6e4aa_sys_exit [bpf]
- Launch any program which accesses file system frequently so can hit
the system calls trace flow with eBPF event;
- Capture CoreSight trace data with filtering eBPF program:
root@debian:~# perf record -e cs_etm/@20070000.etr/ \
--filter 'filter 0xffff000000086a84/0x800' -a sleep 5s
- Annotate for symbol 'bpf_prog_f173133dc38ccf87_sys_enter':
root@debian:~# perf report
Then select 'branches' samples and press 'a' to annotate symbol
'bpf_prog_f173133dc38ccf87_sys_enter', press 'P' to print to the
bpf_prog_f173133dc38ccf87_sys_enter.annotation file:
root@debian:~# cat bpf_prog_f173133dc38ccf87_sys_enter.annotation
bpf_prog_f173133dc38ccf87_sys_enter() bpf_prog_f173133dc38ccf87_sys_enter
Event: branches
Percent int sys_enter(struct syscall_enter_args *args)
stp x29, x30, [sp, #-16]!
int key = 0;
mov x29, sp
augmented_args = bpf_map_lookup_elem(&augmented_filename_map, &key);
stp x19, x20, [sp, #-16]!
augmented_args = bpf_map_lookup_elem(&augmented_filename_map, &key);
stp x21, x22, [sp, #-16]!
stp x25, x26, [sp, #-16]!
return bpf_get_current_pid_tgid();
mov x25, sp
return bpf_get_current_pid_tgid();
mov x26, #0x0 // #0
sub sp, sp, #0x10
return bpf_map_lookup_elem(pids, &pid) != NULL;
add x19, x0, #0x0
mov x0, #0x0 // #0
mov x10, #0xfffffffffffffff8 // #-8
if (pid_filter__has(&pids_filtered, getpid()))
str w0, [x25, x10]
probe_read(&augmented_args->args, sizeof(augmented_args->args), args);
add x1, x25, #0x0
probe_read(&augmented_args->args, sizeof(augmented_args->args), args);
mov x10, #0xfffffffffffffff8 // #-8
syscall = bpf_map_lookup_elem(&syscalls, &augmented_args->args.syscall_nr);
add x1, x1, x10
syscall = bpf_map_lookup_elem(&syscalls, &augmented_args->args.syscall_nr);
mov x0, #0xffff8009ffffffff // #-140694538682369
movk x0, #0x6698, lsl #16
movk x0, #0x3e00
mov x10, #0xffffffffffff1040 // #-61376
if (syscall == NULL || !syscall->enabled)
movk x10, #0x1023, lsl #16
if (syscall == NULL || !syscall->enabled)
movk x10, #0x0, lsl #32
loop_iter_first()
3.69 → blr bpf_prog_f173133dc38ccf87_sys_enter
loop_iter_first()
add x7, x0, #0x0
loop_iter_first()
add x20, x7, #0x0
int size = probe_read_str(&augmented_filename->value, filename_len, filename_arg);
mov x0, #0x1 // #1
[...]
Cc: Mathieu Poirier <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Suzuki Poulouse <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Leo Yan <[email protected]>
---
tools/perf/Makefile.config | 24 ++++++++++++++++++++++++
tools/perf/util/cs-etm.c | 26 +++++++++++++++++++++++++-
2 files changed, 49 insertions(+), 1 deletion(-)
diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config
index 51dd00f65709..4776c2c1fb6d 100644
--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -418,6 +418,30 @@ ifdef CORESIGHT
endif
LDFLAGS += $(LIBOPENCSD_LDFLAGS)
EXTLIBS += $(OPENCSDLIBS)
+ ifneq ($(wildcard $(srctree)/arch/arm64/kernel/vmlinux.lds),)
+ # Extract info from lds:
+ # . = ((((((((0xffffffffffffffff)) - (((1)) << (48)) + 1) + (0)) + (0x08000000))) + (0x08000000))) + 0x00080000;
+ # ARM64_PRE_START_SIZE := (0x08000000 + 0x08000000 + 0x00080000)
+ ARM64_PRE_START_SIZE := $(shell egrep ' \. \= \({8}0x[0-9a-fA-F]+\){2}' \
+ $(srctree)/arch/arm64/kernel/vmlinux.lds | \
+ sed -e 's/[(|)|.|=|+|<|;|-]//g' -e 's/ \+/ /g' -e 's/^[ \t]*//' | \
+ awk -F' ' '{print "("$$6 "+" $$7 "+" $$8")"}' 2>/dev/null)
+ else
+ ARM64_PRE_START_SIZE := 0
+ endif
+ CFLAGS += -DARM64_PRE_START_SIZE="$(ARM64_PRE_START_SIZE)"
+ ifneq ($(wildcard $(srctree)/arch/arm/kernel/vmlinux.lds),)
+ # Extract info from lds:
+ # . = ((0xC0000000)) + 0x00208000;
+ # ARM_PRE_START_SIZE := 0x00208000
+ ARM_PRE_START_SIZE := $(shell egrep ' \. \= \({2}0x[0-9a-fA-F]+\){2}' \
+ $(srctree)/arch/arm/kernel/vmlinux.lds | \
+ sed -e 's/[(|)|.|=|+|<|;|-]//g' -e 's/ \+/ /g' -e 's/^[ \t]*//' | \
+ awk -F' ' '{print "("$$2")"}' 2>/dev/null)
+ else
+ ARM_PRE_START_SIZE := 0
+ endif
+ CFLAGS += -DARM_PRE_START_SIZE="$(ARM_PRE_START_SIZE)"
$(call detected,CONFIG_LIBOPENCSD)
ifdef CSTRACE_RAW
CFLAGS += -DCS_DEBUG_RAW
diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
index 0c7776b51045..ae831f836c70 100644
--- a/tools/perf/util/cs-etm.c
+++ b/tools/perf/util/cs-etm.c
@@ -613,10 +613,34 @@ static void cs_etm__free(struct perf_session *session)
static u8 cs_etm__cpu_mode(struct cs_etm_queue *etmq, u64 address)
{
struct machine *machine;
+ u64 fixup_kernel_start = 0;
+ const char *arch;
machine = etmq->etm->machine;
+ arch = perf_env__arch(machine->env);
- if (address >= etmq->etm->kernel_start) {
+ /*
+ * Since arm and arm64 specify some memory regions prior to
+ * 'kernel_start', kernel addresses can be less than 'kernel_start'.
+ *
+ * For arm architecture, the 16MB virtual memory space prior to
+ * 'kernel_start' is allocated to device modules, a PMD table if
+ * CONFIG_HIGHMEM is enabled and a PGD table.
+ *
+ * For arm64 architecture, the root PGD table, device module memory
+ * region and BPF jit region are prior to 'kernel_start'.
+ *
+ * To reflect the complete kernel address space, compensate these
+ * pre-defined regions for kernel start address.
+ */
+ if (!strcmp(arch, "arm64"))
+ fixup_kernel_start = etmq->etm->kernel_start -
+ ARM64_PRE_START_SIZE;
+ else if (!strcmp(arch, "arm"))
+ fixup_kernel_start = etmq->etm->kernel_start -
+ ARM_PRE_START_SIZE;
+
+ if (address >= fixup_kernel_start) {
if (machine__is_host(machine))
return PERF_RECORD_MISC_KERNEL;
else
--
2.17.1
Hi Leo,
On Mon, 17 Jun 2019 at 09:00, Leo Yan <[email protected]> wrote:
>
> Arm and arm64 architecture reserve some memory regions prior to the
> symbol '_stext' and these memory regions later will be used by device
> module and BPF jit. The current code misses to consider these memory
> regions thus any address in the regions will be taken as user space
> mode, but perf cannot find the corresponding dso with the wrong CPU
> mode so we misses to generate samples for device module and BPF
> related trace data.
>
> This patch parse the link scripts to get the memory size prior to start
> address and reduce this size from 'etmq->etm->kernel_start', then can
> get a fixed up kernel start address which contain memory regions for
> device module and BPF. Finally, cs_etm__cpu_mode() can return right
> mode for these memory regions and perf can successfully generate
> samples.
>
> The reason for parsing the link scripts is Arm architecture changes text
> offset dependent on different platforms, which define multiple text
> offsets in $kernel/arch/arm/Makefile. This offset is decided when build
> kernel and the final value is extended in the link script, so we can
> extract the used value from the link script. We use the same way to
> parse arm64 link script as well. If fail to find the link script, the
> pre start memory size is assumed as zero, in this case it has no any
> change caused with this patch.
>
> Below is detailed info for testing this patch:
>
> - Build LLVM/Clang 8.0 or later version;
>
> - Configure perf with ~/.perfconfig:
>
> root@debian:~# cat ~/.perfconfig
> # this file is auto-generated.
> [llvm]
> clang-path = /mnt/build/llvm-build/build/install/bin/clang
> kbuild-dir = /mnt/linux-kernel/linux-cs-dev/
> clang-opt = "-DLINUX_VERSION_CODE=0x50200 -g"
> dump-obj = true
>
> [trace]
> show_zeros = yes
> show_duration = no
> no_inherit = yes
> show_timestamp = no
> show_arg_names = no
> args_alignment = 40
> show_prefix = yes
>
> - Run 'perf trace' command with eBPF event:
>
> root@debian:~# perf trace -e string \
> -e $kernel/tools/perf/examples/bpf/augmented_raw_syscalls.c
>
> - Read eBPF program memory mapping in kernel:
>
> root@debian:~# echo 1 > /proc/sys/net/core/bpf_jit_kallsyms
> root@debian:~# cat /proc/kallsyms | grep -E "bpf_prog_.+_sys_[enter|exit]"
> ffff000000086a84 t bpf_prog_f173133dc38ccf87_sys_enter [bpf]
> ffff000000088618 t bpf_prog_c1bd85c092d6e4aa_sys_exit [bpf]
>
> - Launch any program which accesses file system frequently so can hit
> the system calls trace flow with eBPF event;
>
> - Capture CoreSight trace data with filtering eBPF program:
>
> root@debian:~# perf record -e cs_etm/@20070000.etr/ \
> --filter 'filter 0xffff000000086a84/0x800' -a sleep 5s
>
> - Annotate for symbol 'bpf_prog_f173133dc38ccf87_sys_enter':
>
> root@debian:~# perf report
> Then select 'branches' samples and press 'a' to annotate symbol
> 'bpf_prog_f173133dc38ccf87_sys_enter', press 'P' to print to the
> bpf_prog_f173133dc38ccf87_sys_enter.annotation file:
>
> root@debian:~# cat bpf_prog_f173133dc38ccf87_sys_enter.annotation
>
> bpf_prog_f173133dc38ccf87_sys_enter() bpf_prog_f173133dc38ccf87_sys_enter
> Event: branches
>
> Percent int sys_enter(struct syscall_enter_args *args)
> stp x29, x30, [sp, #-16]!
>
> int key = 0;
> mov x29, sp
>
> augmented_args = bpf_map_lookup_elem(&augmented_filename_map, &key);
> stp x19, x20, [sp, #-16]!
>
> augmented_args = bpf_map_lookup_elem(&augmented_filename_map, &key);
> stp x21, x22, [sp, #-16]!
>
> stp x25, x26, [sp, #-16]!
>
> return bpf_get_current_pid_tgid();
> mov x25, sp
>
> return bpf_get_current_pid_tgid();
> mov x26, #0x0 // #0
>
> sub sp, sp, #0x10
>
> return bpf_map_lookup_elem(pids, &pid) != NULL;
> add x19, x0, #0x0
>
> mov x0, #0x0 // #0
>
> mov x10, #0xfffffffffffffff8 // #-8
>
> if (pid_filter__has(&pids_filtered, getpid()))
> str w0, [x25, x10]
>
> probe_read(&augmented_args->args, sizeof(augmented_args->args), args);
> add x1, x25, #0x0
>
> probe_read(&augmented_args->args, sizeof(augmented_args->args), args);
> mov x10, #0xfffffffffffffff8 // #-8
>
> syscall = bpf_map_lookup_elem(&syscalls, &augmented_args->args.syscall_nr);
> add x1, x1, x10
>
> syscall = bpf_map_lookup_elem(&syscalls, &augmented_args->args.syscall_nr);
> mov x0, #0xffff8009ffffffff // #-140694538682369
>
> movk x0, #0x6698, lsl #16
>
> movk x0, #0x3e00
>
> mov x10, #0xffffffffffff1040 // #-61376
>
> if (syscall == NULL || !syscall->enabled)
> movk x10, #0x1023, lsl #16
>
> if (syscall == NULL || !syscall->enabled)
> movk x10, #0x0, lsl #32
>
> loop_iter_first()
> 3.69 → blr bpf_prog_f173133dc38ccf87_sys_enter
> loop_iter_first()
> add x7, x0, #0x0
>
> loop_iter_first()
> add x20, x7, #0x0
>
> int size = probe_read_str(&augmented_filename->value, filename_len, filename_arg);
> mov x0, #0x1 // #1
>
> [...]
>
> Cc: Mathieu Poirier <[email protected]>
> Cc: Alexander Shishkin <[email protected]>
> Cc: Jiri Olsa <[email protected]>
> Cc: Namhyung Kim <[email protected]>
> Cc: Peter Zijlstra <[email protected]>
> Cc: Suzuki Poulouse <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Signed-off-by: Leo Yan <[email protected]>
> ---
> tools/perf/Makefile.config | 24 ++++++++++++++++++++++++
> tools/perf/util/cs-etm.c | 26 +++++++++++++++++++++++++-
> 2 files changed, 49 insertions(+), 1 deletion(-)
>
> diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config
> index 51dd00f65709..4776c2c1fb6d 100644
> --- a/tools/perf/Makefile.config
> +++ b/tools/perf/Makefile.config
> @@ -418,6 +418,30 @@ ifdef CORESIGHT
> endif
> LDFLAGS += $(LIBOPENCSD_LDFLAGS)
> EXTLIBS += $(OPENCSDLIBS)
> + ifneq ($(wildcard $(srctree)/arch/arm64/kernel/vmlinux.lds),)
> + # Extract info from lds:
> + # . = ((((((((0xffffffffffffffff)) - (((1)) << (48)) + 1) + (0)) + (0x08000000))) + (0x08000000))) + 0x00080000;
> + # ARM64_PRE_START_SIZE := (0x08000000 + 0x08000000 + 0x00080000)
> + ARM64_PRE_START_SIZE := $(shell egrep ' \. \= \({8}0x[0-9a-fA-F]+\){2}' \
> + $(srctree)/arch/arm64/kernel/vmlinux.lds | \
> + sed -e 's/[(|)|.|=|+|<|;|-]//g' -e 's/ \+/ /g' -e 's/^[ \t]*//' | \
> + awk -F' ' '{print "("$$6 "+" $$7 "+" $$8")"}' 2>/dev/null)
> + else
> + ARM64_PRE_START_SIZE := 0
> + endif
> + CFLAGS += -DARM64_PRE_START_SIZE="$(ARM64_PRE_START_SIZE)"
> + ifneq ($(wildcard $(srctree)/arch/arm/kernel/vmlinux.lds),)
> + # Extract info from lds:
> + # . = ((0xC0000000)) + 0x00208000;
> + # ARM_PRE_START_SIZE := 0x00208000
> + ARM_PRE_START_SIZE := $(shell egrep ' \. \= \({2}0x[0-9a-fA-F]+\){2}' \
> + $(srctree)/arch/arm/kernel/vmlinux.lds | \
> + sed -e 's/[(|)|.|=|+|<|;|-]//g' -e 's/ \+/ /g' -e 's/^[ \t]*//' | \
> + awk -F' ' '{print "("$$2")"}' 2>/dev/null)
> + else
> + ARM_PRE_START_SIZE := 0
> + endif
> + CFLAGS += -DARM_PRE_START_SIZE="$(ARM_PRE_START_SIZE)"
> $(call detected,CONFIG_LIBOPENCSD)
> ifdef CSTRACE_RAW
> CFLAGS += -DCS_DEBUG_RAW
> diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
> index 0c7776b51045..ae831f836c70 100644
> --- a/tools/perf/util/cs-etm.c
> +++ b/tools/perf/util/cs-etm.c
> @@ -613,10 +613,34 @@ static void cs_etm__free(struct perf_session *session)
> static u8 cs_etm__cpu_mode(struct cs_etm_queue *etmq, u64 address)
> {
> struct machine *machine;
> + u64 fixup_kernel_start = 0;
> + const char *arch;
>
> machine = etmq->etm->machine;
> + arch = perf_env__arch(machine->env);
>
> - if (address >= etmq->etm->kernel_start) {
> + /*
> + * Since arm and arm64 specify some memory regions prior to
> + * 'kernel_start', kernel addresses can be less than 'kernel_start'.
> + *
> + * For arm architecture, the 16MB virtual memory space prior to
> + * 'kernel_start' is allocated to device modules, a PMD table if
> + * CONFIG_HIGHMEM is enabled and a PGD table.
> + *
> + * For arm64 architecture, the root PGD table, device module memory
> + * region and BPF jit region are prior to 'kernel_start'.
> + *
> + * To reflect the complete kernel address space, compensate these
> + * pre-defined regions for kernel start address.
> + */
> + if (!strcmp(arch, "arm64"))
> + fixup_kernel_start = etmq->etm->kernel_start -
> + ARM64_PRE_START_SIZE;
> + else if (!strcmp(arch, "arm"))
> + fixup_kernel_start = etmq->etm->kernel_start -
> + ARM_PRE_START_SIZE;
I will test your work but from a quick look wouldn't it be better to
have a single define name here? From looking at the modifications you
did to Makefile.config there doesn't seem to be a reason to have two.
Thanks,
Mathieu
> +
> + if (address >= fixup_kernel_start) {
> if (machine__is_host(machine))
> return PERF_RECORD_MISC_KERNEL;
> else
> --
> 2.17.1
>
Hi Mathieu,
On Wed, Jun 19, 2019 at 11:49:44AM -0600, Mathieu Poirier wrote:
[...]
> > diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config
> > index 51dd00f65709..4776c2c1fb6d 100644
> > --- a/tools/perf/Makefile.config
> > +++ b/tools/perf/Makefile.config
> > @@ -418,6 +418,30 @@ ifdef CORESIGHT
> > endif
> > LDFLAGS += $(LIBOPENCSD_LDFLAGS)
> > EXTLIBS += $(OPENCSDLIBS)
> > + ifneq ($(wildcard $(srctree)/arch/arm64/kernel/vmlinux.lds),)
> > + # Extract info from lds:
> > + # . = ((((((((0xffffffffffffffff)) - (((1)) << (48)) + 1) + (0)) + (0x08000000))) + (0x08000000))) + 0x00080000;
> > + # ARM64_PRE_START_SIZE := (0x08000000 + 0x08000000 + 0x00080000)
> > + ARM64_PRE_START_SIZE := $(shell egrep ' \. \= \({8}0x[0-9a-fA-F]+\){2}' \
> > + $(srctree)/arch/arm64/kernel/vmlinux.lds | \
> > + sed -e 's/[(|)|.|=|+|<|;|-]//g' -e 's/ \+/ /g' -e 's/^[ \t]*//' | \
> > + awk -F' ' '{print "("$$6 "+" $$7 "+" $$8")"}' 2>/dev/null)
> > + else
> > + ARM64_PRE_START_SIZE := 0
> > + endif
> > + CFLAGS += -DARM64_PRE_START_SIZE="$(ARM64_PRE_START_SIZE)"
> > + ifneq ($(wildcard $(srctree)/arch/arm/kernel/vmlinux.lds),)
> > + # Extract info from lds:
> > + # . = ((0xC0000000)) + 0x00208000;
> > + # ARM_PRE_START_SIZE := 0x00208000
> > + ARM_PRE_START_SIZE := $(shell egrep ' \. \= \({2}0x[0-9a-fA-F]+\){2}' \
> > + $(srctree)/arch/arm/kernel/vmlinux.lds | \
> > + sed -e 's/[(|)|.|=|+|<|;|-]//g' -e 's/ \+/ /g' -e 's/^[ \t]*//' | \
> > + awk -F' ' '{print "("$$2")"}' 2>/dev/null)
> > + else
> > + ARM_PRE_START_SIZE := 0
> > + endif
> > + CFLAGS += -DARM_PRE_START_SIZE="$(ARM_PRE_START_SIZE)"
> > $(call detected,CONFIG_LIBOPENCSD)
> > ifdef CSTRACE_RAW
> > CFLAGS += -DCS_DEBUG_RAW
> > diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
> > index 0c7776b51045..ae831f836c70 100644
> > --- a/tools/perf/util/cs-etm.c
> > +++ b/tools/perf/util/cs-etm.c
> > @@ -613,10 +613,34 @@ static void cs_etm__free(struct perf_session *session)
> > static u8 cs_etm__cpu_mode(struct cs_etm_queue *etmq, u64 address)
> > {
> > struct machine *machine;
> > + u64 fixup_kernel_start = 0;
> > + const char *arch;
> >
> > machine = etmq->etm->machine;
> > + arch = perf_env__arch(machine->env);
> >
> > - if (address >= etmq->etm->kernel_start) {
> > + /*
> > + * Since arm and arm64 specify some memory regions prior to
> > + * 'kernel_start', kernel addresses can be less than 'kernel_start'.
> > + *
> > + * For arm architecture, the 16MB virtual memory space prior to
> > + * 'kernel_start' is allocated to device modules, a PMD table if
> > + * CONFIG_HIGHMEM is enabled and a PGD table.
> > + *
> > + * For arm64 architecture, the root PGD table, device module memory
> > + * region and BPF jit region are prior to 'kernel_start'.
> > + *
> > + * To reflect the complete kernel address space, compensate these
> > + * pre-defined regions for kernel start address.
> > + */
> > + if (!strcmp(arch, "arm64"))
> > + fixup_kernel_start = etmq->etm->kernel_start -
> > + ARM64_PRE_START_SIZE;
> > + else if (!strcmp(arch, "arm"))
> > + fixup_kernel_start = etmq->etm->kernel_start -
> > + ARM_PRE_START_SIZE;
>
> I will test your work but from a quick look wouldn't it be better to
> have a single define name here? From looking at the modifications you
> did to Makefile.config there doesn't seem to be a reason to have two.
Thanks for suggestion. I changed to use single define
ARM_PRE_START_SIZE and sent patch v2 [1].
If possible, please test patch v2.
Thanks,
Leo Yan
[1] https://lore.kernel.org/linux-arm-kernel/[email protected]/T/#u
> > +
> > + if (address >= fixup_kernel_start) {
> > if (machine__is_host(machine))
> > return PERF_RECORD_MISC_KERNEL;
> > else
> > --
> > 2.17.1
> >
Em Thu, Jun 20, 2019 at 08:58:29AM +0800, Leo Yan escreveu:
> Hi Mathieu,
>
> On Wed, Jun 19, 2019 at 11:49:44AM -0600, Mathieu Poirier wrote:
>
> [...]
>
> > > diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config
> > > index 51dd00f65709..4776c2c1fb6d 100644
> > > --- a/tools/perf/Makefile.config
> > > +++ b/tools/perf/Makefile.config
> > > @@ -418,6 +418,30 @@ ifdef CORESIGHT
> > > endif
> > > LDFLAGS += $(LIBOPENCSD_LDFLAGS)
> > > EXTLIBS += $(OPENCSDLIBS)
> > > + ifneq ($(wildcard $(srctree)/arch/arm64/kernel/vmlinux.lds),)
> > > + # Extract info from lds:
> > > + # . = ((((((((0xffffffffffffffff)) - (((1)) << (48)) + 1) + (0)) + (0x08000000))) + (0x08000000))) + 0x00080000;
> > > + # ARM64_PRE_START_SIZE := (0x08000000 + 0x08000000 + 0x00080000)
> > > + ARM64_PRE_START_SIZE := $(shell egrep ' \. \= \({8}0x[0-9a-fA-F]+\){2}' \
> > > + $(srctree)/arch/arm64/kernel/vmlinux.lds | \
> > > + sed -e 's/[(|)|.|=|+|<|;|-]//g' -e 's/ \+/ /g' -e 's/^[ \t]*//' | \
> > > + awk -F' ' '{print "("$$6 "+" $$7 "+" $$8")"}' 2>/dev/null)
> > > + else
> > > + ARM64_PRE_START_SIZE := 0
> > > + endif
> > > + CFLAGS += -DARM64_PRE_START_SIZE="$(ARM64_PRE_START_SIZE)"
> > > + ifneq ($(wildcard $(srctree)/arch/arm/kernel/vmlinux.lds),)
> > > + # Extract info from lds:
> > > + # . = ((0xC0000000)) + 0x00208000;
> > > + # ARM_PRE_START_SIZE := 0x00208000
> > > + ARM_PRE_START_SIZE := $(shell egrep ' \. \= \({2}0x[0-9a-fA-F]+\){2}' \
> > > + $(srctree)/arch/arm/kernel/vmlinux.lds | \
> > > + sed -e 's/[(|)|.|=|+|<|;|-]//g' -e 's/ \+/ /g' -e 's/^[ \t]*//' | \
> > > + awk -F' ' '{print "("$$2")"}' 2>/dev/null)
> > > + else
> > > + ARM_PRE_START_SIZE := 0
> > > + endif
> > > + CFLAGS += -DARM_PRE_START_SIZE="$(ARM_PRE_START_SIZE)"
> > > $(call detected,CONFIG_LIBOPENCSD)
> > > ifdef CSTRACE_RAW
> > > CFLAGS += -DCS_DEBUG_RAW
> > > diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
> > > index 0c7776b51045..ae831f836c70 100644
> > > --- a/tools/perf/util/cs-etm.c
> > > +++ b/tools/perf/util/cs-etm.c
> > > @@ -613,10 +613,34 @@ static void cs_etm__free(struct perf_session *session)
> > > static u8 cs_etm__cpu_mode(struct cs_etm_queue *etmq, u64 address)
> > > {
> > > struct machine *machine;
> > > + u64 fixup_kernel_start = 0;
> > > + const char *arch;
> > >
> > > machine = etmq->etm->machine;
> > > + arch = perf_env__arch(machine->env);
> > >
> > > - if (address >= etmq->etm->kernel_start) {
> > > + /*
> > > + * Since arm and arm64 specify some memory regions prior to
> > > + * 'kernel_start', kernel addresses can be less than 'kernel_start'.
> > > + *
> > > + * For arm architecture, the 16MB virtual memory space prior to
> > > + * 'kernel_start' is allocated to device modules, a PMD table if
> > > + * CONFIG_HIGHMEM is enabled and a PGD table.
> > > + *
> > > + * For arm64 architecture, the root PGD table, device module memory
> > > + * region and BPF jit region are prior to 'kernel_start'.
> > > + *
> > > + * To reflect the complete kernel address space, compensate these
> > > + * pre-defined regions for kernel start address.
> > > + */
> > > + if (!strcmp(arch, "arm64"))
> > > + fixup_kernel_start = etmq->etm->kernel_start -
> > > + ARM64_PRE_START_SIZE;
> > > + else if (!strcmp(arch, "arm"))
> > > + fixup_kernel_start = etmq->etm->kernel_start -
> > > + ARM_PRE_START_SIZE;
> >
> > I will test your work but from a quick look wouldn't it be better to
> > have a single define name here? From looking at the modifications you
> > did to Makefile.config there doesn't seem to be a reason to have two.
>
> Thanks for suggestion. I changed to use single define
> ARM_PRE_START_SIZE and sent patch v2 [1].
>
> If possible, please test patch v2.
>
> Thanks,
> Leo Yan
So just for the record, I'm waiting for Mathieu on this one, i.e. for
him to test/ack v3.
- Arnaldo
> [1] https://lore.kernel.org/linux-arm-kernel/[email protected]/T/#u
>
> > > +
> > > + if (address >= fixup_kernel_start) {
> > > if (machine__is_host(machine))
> > > return PERF_RECORD_MISC_KERNEL;
> > > else
> > > --
> > > 2.17.1
> > >
--
- Arnaldo
Hi Arnaldo,
On Mon, Jun 24, 2019 at 04:00:09PM -0300, Arnaldo Carvalho de Melo wrote:
[...]
> > > > diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
> > > > index 0c7776b51045..ae831f836c70 100644
> > > > --- a/tools/perf/util/cs-etm.c
> > > > +++ b/tools/perf/util/cs-etm.c
> > > > @@ -613,10 +613,34 @@ static void cs_etm__free(struct perf_session *session)
> > > > static u8 cs_etm__cpu_mode(struct cs_etm_queue *etmq, u64 address)
> > > > {
> > > > struct machine *machine;
> > > > + u64 fixup_kernel_start = 0;
> > > > + const char *arch;
> > > >
> > > > machine = etmq->etm->machine;
> > > > + arch = perf_env__arch(machine->env);
> > > >
> > > > - if (address >= etmq->etm->kernel_start) {
> > > > + /*
> > > > + * Since arm and arm64 specify some memory regions prior to
> > > > + * 'kernel_start', kernel addresses can be less than 'kernel_start'.
> > > > + *
> > > > + * For arm architecture, the 16MB virtual memory space prior to
> > > > + * 'kernel_start' is allocated to device modules, a PMD table if
> > > > + * CONFIG_HIGHMEM is enabled and a PGD table.
> > > > + *
> > > > + * For arm64 architecture, the root PGD table, device module memory
> > > > + * region and BPF jit region are prior to 'kernel_start'.
> > > > + *
> > > > + * To reflect the complete kernel address space, compensate these
> > > > + * pre-defined regions for kernel start address.
> > > > + */
> > > > + if (!strcmp(arch, "arm64"))
> > > > + fixup_kernel_start = etmq->etm->kernel_start -
> > > > + ARM64_PRE_START_SIZE;
> > > > + else if (!strcmp(arch, "arm"))
> > > > + fixup_kernel_start = etmq->etm->kernel_start -
> > > > + ARM_PRE_START_SIZE;
> > >
> > > I will test your work but from a quick look wouldn't it be better to
> > > have a single define name here? From looking at the modifications you
> > > did to Makefile.config there doesn't seem to be a reason to have two.
> >
> > Thanks for suggestion. I changed to use single define
> > ARM_PRE_START_SIZE and sent patch v2 [1].
> >
> > If possible, please test patch v2.
> >
> > Thanks,
> > Leo Yan
>
> So just for the record, I'm waiting for Mathieu on this one, i.e. for
> him to test/ack v3.
Yes, this makes sense. I'd like to get Mathieu's green light as well,
it needs to take much time to build llvm/clang on SBC, so it's no rush.
Thanks,
Leo Yan
On Mon, 24 Jun 2019 at 13:00, Arnaldo Carvalho de Melo
<[email protected]> wrote:
>
> Em Thu, Jun 20, 2019 at 08:58:29AM +0800, Leo Yan escreveu:
> > Hi Mathieu,
> >
> > On Wed, Jun 19, 2019 at 11:49:44AM -0600, Mathieu Poirier wrote:
> >
> > [...]
> >
> > > > diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config
> > > > index 51dd00f65709..4776c2c1fb6d 100644
> > > > --- a/tools/perf/Makefile.config
> > > > +++ b/tools/perf/Makefile.config
> > > > @@ -418,6 +418,30 @@ ifdef CORESIGHT
> > > > endif
> > > > LDFLAGS += $(LIBOPENCSD_LDFLAGS)
> > > > EXTLIBS += $(OPENCSDLIBS)
> > > > + ifneq ($(wildcard $(srctree)/arch/arm64/kernel/vmlinux.lds),)
> > > > + # Extract info from lds:
> > > > + # . = ((((((((0xffffffffffffffff)) - (((1)) << (48)) + 1) + (0)) + (0x08000000))) + (0x08000000))) + 0x00080000;
> > > > + # ARM64_PRE_START_SIZE := (0x08000000 + 0x08000000 + 0x00080000)
> > > > + ARM64_PRE_START_SIZE := $(shell egrep ' \. \= \({8}0x[0-9a-fA-F]+\){2}' \
> > > > + $(srctree)/arch/arm64/kernel/vmlinux.lds | \
> > > > + sed -e 's/[(|)|.|=|+|<|;|-]//g' -e 's/ \+/ /g' -e 's/^[ \t]*//' | \
> > > > + awk -F' ' '{print "("$$6 "+" $$7 "+" $$8")"}' 2>/dev/null)
> > > > + else
> > > > + ARM64_PRE_START_SIZE := 0
> > > > + endif
> > > > + CFLAGS += -DARM64_PRE_START_SIZE="$(ARM64_PRE_START_SIZE)"
> > > > + ifneq ($(wildcard $(srctree)/arch/arm/kernel/vmlinux.lds),)
> > > > + # Extract info from lds:
> > > > + # . = ((0xC0000000)) + 0x00208000;
> > > > + # ARM_PRE_START_SIZE := 0x00208000
> > > > + ARM_PRE_START_SIZE := $(shell egrep ' \. \= \({2}0x[0-9a-fA-F]+\){2}' \
> > > > + $(srctree)/arch/arm/kernel/vmlinux.lds | \
> > > > + sed -e 's/[(|)|.|=|+|<|;|-]//g' -e 's/ \+/ /g' -e 's/^[ \t]*//' | \
> > > > + awk -F' ' '{print "("$$2")"}' 2>/dev/null)
> > > > + else
> > > > + ARM_PRE_START_SIZE := 0
> > > > + endif
> > > > + CFLAGS += -DARM_PRE_START_SIZE="$(ARM_PRE_START_SIZE)"
> > > > $(call detected,CONFIG_LIBOPENCSD)
> > > > ifdef CSTRACE_RAW
> > > > CFLAGS += -DCS_DEBUG_RAW
> > > > diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
> > > > index 0c7776b51045..ae831f836c70 100644
> > > > --- a/tools/perf/util/cs-etm.c
> > > > +++ b/tools/perf/util/cs-etm.c
> > > > @@ -613,10 +613,34 @@ static void cs_etm__free(struct perf_session *session)
> > > > static u8 cs_etm__cpu_mode(struct cs_etm_queue *etmq, u64 address)
> > > > {
> > > > struct machine *machine;
> > > > + u64 fixup_kernel_start = 0;
> > > > + const char *arch;
> > > >
> > > > machine = etmq->etm->machine;
> > > > + arch = perf_env__arch(machine->env);
> > > >
> > > > - if (address >= etmq->etm->kernel_start) {
> > > > + /*
> > > > + * Since arm and arm64 specify some memory regions prior to
> > > > + * 'kernel_start', kernel addresses can be less than 'kernel_start'.
> > > > + *
> > > > + * For arm architecture, the 16MB virtual memory space prior to
> > > > + * 'kernel_start' is allocated to device modules, a PMD table if
> > > > + * CONFIG_HIGHMEM is enabled and a PGD table.
> > > > + *
> > > > + * For arm64 architecture, the root PGD table, device module memory
> > > > + * region and BPF jit region are prior to 'kernel_start'.
> > > > + *
> > > > + * To reflect the complete kernel address space, compensate these
> > > > + * pre-defined regions for kernel start address.
> > > > + */
> > > > + if (!strcmp(arch, "arm64"))
> > > > + fixup_kernel_start = etmq->etm->kernel_start -
> > > > + ARM64_PRE_START_SIZE;
> > > > + else if (!strcmp(arch, "arm"))
> > > > + fixup_kernel_start = etmq->etm->kernel_start -
> > > > + ARM_PRE_START_SIZE;
> > >
> > > I will test your work but from a quick look wouldn't it be better to
> > > have a single define name here? From looking at the modifications you
> > > did to Makefile.config there doesn't seem to be a reason to have two.
> >
> > Thanks for suggestion. I changed to use single define
> > ARM_PRE_START_SIZE and sent patch v2 [1].
> >
> > If possible, please test patch v2.
> >
> > Thanks,
> > Leo Yan
>
> So just for the record, I'm waiting for Mathieu on this one, i.e. for
> him to test/ack v3.
Right, please give me some time to test this. As Leo indicated the
procedure is time consuming.
Thanks,
Mathieu
>
> - Arnaldo
>
> > [1] https://lore.kernel.org/linux-arm-kernel/[email protected]/T/#u
> >
> > > > +
> > > > + if (address >= fixup_kernel_start) {
> > > > if (machine__is_host(machine))
> > > > return PERF_RECORD_MISC_KERNEL;
> > > > else
> > > > --
> > > > 2.17.1
> > > >
>
> --
>
> - Arnaldo