2019-06-28 01:48:12

by Bao Xiaowei

Subject: [PATCHv3 2/2] PCI: layerscape: Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately

Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately.

Signed-off-by: Xiaowei Bao <[email protected]>
---
v2:
- No change.
v3:
- modify the commit message.

drivers/pci/controller/dwc/Kconfig | 20 ++++++++++++++++++--
drivers/pci/controller/dwc/Makefile | 3 ++-
2 files changed, 20 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index a6ce1ee..a41ccf5 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -131,13 +131,29 @@ config PCI_KEYSTONE_EP
DesignWare core functions to implement the driver.

config PCI_LAYERSCAPE
- bool "Freescale Layerscape PCIe controller"
+ bool "Freescale Layerscape PCIe controller - Host mode"
depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
depends on PCI_MSI_IRQ_DOMAIN
select MFD_SYSCON
select PCIE_DW_HOST
help
- Say Y here if you want PCIe controller support on Layerscape SoCs.
+ Say Y here if you want to enable PCIe controller support on Layerscape
+ SoCs to work in Host mode.
+ This controller can work either as EP or RC. The RCW[HOST_AGT_PEX]
+ determines which PCIe controller works in EP mode and which PCIe
+ controller works in RC mode.
+
+config PCI_LAYERSCAPE_EP
+ bool "Freescale Layerscape PCIe controller - Endpoint mode"
+ depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
+ depends on PCI_ENDPOINT
+ select PCIE_DW_EP
+ help
+ Say Y here if you want to enable PCIe controller support on Layerscape
+ SoCs to work in Endpoint mode.
+ This controller can work either as EP or RC. The RCW[HOST_AGT_PEX]
+ determines which PCIe controller works in EP mode and which PCIe
+ controller works in RC mode.

config PCI_HISI
depends on OF && (ARM64 || COMPILE_TEST)
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index b085dfd..824fde7 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -8,7 +8,8 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
-obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o
+obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
+obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
--
1.7.1

2019-08-12 10:06:58

by Lorenzo Pieralisi

Subject: Re: [PATCHv3 2/2] PCI: layerscape: Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately

On Fri, Jun 28, 2019 at 09:38:26AM +0800, Xiaowei Bao wrote:
> Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately.
>
> Signed-off-by: Xiaowei Bao <[email protected]>
> ---
> v2:
> - No change.
> v3:
> - modify the commit message.
>
> drivers/pci/controller/dwc/Kconfig | 20 ++++++++++++++++++--
> drivers/pci/controller/dwc/Makefile | 3 ++-
> 2 files changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
> index a6ce1ee..a41ccf5 100644
> --- a/drivers/pci/controller/dwc/Kconfig
> +++ b/drivers/pci/controller/dwc/Kconfig
> @@ -131,13 +131,29 @@ config PCI_KEYSTONE_EP
> DesignWare core functions to implement the driver.
>
> config PCI_LAYERSCAPE
> - bool "Freescale Layerscape PCIe controller"
> + bool "Freescale Layerscape PCIe controller - Host mode"
> depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
> depends on PCI_MSI_IRQ_DOMAIN
> select MFD_SYSCON
> select PCIE_DW_HOST
> help
> - Say Y here if you want PCIe controller support on Layerscape SoCs.
> + Say Y here if you want to enable PCIe controller support on Layerscape
> + SoCs to work in Host mode.
> + This controller can work either as EP or RC. The RCW[HOST_AGT_PEX]

What's "The RCW" ? This entry should explain why a kernel configuration
should enable it.

Lorenzo

> + determines which PCIe controller works in EP mode and which PCIe
> + controller works in RC mode.
> +
> +config PCI_LAYERSCAPE_EP
> + bool "Freescale Layerscape PCIe controller - Endpoint mode"
> + depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
> + depends on PCI_ENDPOINT
> + select PCIE_DW_EP
> + help
> + Say Y here if you want to enable PCIe controller support on Layerscape
> + SoCs to work in Endpoint mode.
> + This controller can work either as EP or RC. The RCW[HOST_AGT_PEX]
> + determines which PCIe controller works in EP mode and which PCIe
> + controller works in RC mode.
>
> config PCI_HISI
> depends on OF && (ARM64 || COMPILE_TEST)
> diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
> index b085dfd..824fde7 100644
> --- a/drivers/pci/controller/dwc/Makefile
> +++ b/drivers/pci/controller/dwc/Makefile
> @@ -8,7 +8,8 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
> obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
> obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
> obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
> -obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o
> +obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
> +obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
> obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
> obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
> obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
> --
> 1.7.1
>

2019-08-12 10:23:17

by Bao Xiaowei

Subject: RE: [EXT] Re: [PATCHv3 2/2] PCI: layerscape: Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately

> -----Original Message-----
> From: Lorenzo Pieralisi <[email protected]>
> Sent: 2019??8??12?? 18:06
> To: Xiaowei Bao <[email protected]>
> Cc: [email protected]; [email protected]; [email protected];
> [email protected]; Leo Li <[email protected]>; [email protected];
> [email protected]; [email protected]; M.h. Lian
> <[email protected]>; Mingkai Hu <[email protected]>; Roy Zang
> <[email protected]>; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]; [email protected];
> [email protected]
> Subject: [EXT] Re: [PATCHv3 2/2] PCI: layerscape: Add
> CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately
>
> Caution: EXT Email
>
> On Fri, Jun 28, 2019 at 09:38:26AM +0800, Xiaowei Bao wrote:
> > Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC separately.
> >
> > Signed-off-by: Xiaowei Bao <[email protected]>
> > ---
> > v2:
> > - No change.
> > v3:
> > - modify the commit message.
> >
> > drivers/pci/controller/dwc/Kconfig | 20 ++++++++++++++++++--
> > drivers/pci/controller/dwc/Makefile | 3 ++-
> > 2 files changed, 20 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/Kconfig
> > b/drivers/pci/controller/dwc/Kconfig
> > index a6ce1ee..a41ccf5 100644
> > --- a/drivers/pci/controller/dwc/Kconfig
> > +++ b/drivers/pci/controller/dwc/Kconfig
> > @@ -131,13 +131,29 @@ config PCI_KEYSTONE_EP
> > DesignWare core functions to implement the driver.
> >
> > config PCI_LAYERSCAPE
> > - bool "Freescale Layerscape PCIe controller"
> > + bool "Freescale Layerscape PCIe controller - Host mode"
> > depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
> > depends on PCI_MSI_IRQ_DOMAIN
> > select MFD_SYSCON
> > select PCIE_DW_HOST
> > help
> > - Say Y here if you want PCIe controller support on Layerscape SoCs.
> > + Say Y here if you want to enable PCIe controller support on
> Layerscape
> > + SoCs to work in Host mode.
> > + This controller can work either as EP or RC. The
> > + RCW[HOST_AGT_PEX]
>
> What's "The RCW" ? This entry should explain why a kernel configuration
> should enable it.
[Xiaowei Bao] Hi Lorenzo, the RCW full name is "reset configuration word", it can be built to a bin file and program to the flash, rather than configure by kernel, almost the NXP Layerscaple platform use this way.
>
> Lorenzo
>
> > + determines which PCIe controller works in EP mode and which
> PCIe
> > + controller works in RC mode.
> > +
> > +config PCI_LAYERSCAPE_EP
> > + bool "Freescale Layerscape PCIe controller - Endpoint mode"
> > + depends on OF && (ARM || ARCH_LAYERSCAPE || COMPILE_TEST)
> > + depends on PCI_ENDPOINT
> > + select PCIE_DW_EP
> > + help
> > + Say Y here if you want to enable PCIe controller support on
> Layerscape
> > + SoCs to work in Endpoint mode.
> > + This controller can work either as EP or RC. The
> RCW[HOST_AGT_PEX]
> > + determines which PCIe controller works in EP mode and which
> PCIe
> > + controller works in RC mode.
> >
> > config PCI_HISI
> > depends on OF && (ARM64 || COMPILE_TEST) diff --git
> > a/drivers/pci/controller/dwc/Makefile
> > b/drivers/pci/controller/dwc/Makefile
> > index b085dfd..824fde7 100644
> > --- a/drivers/pci/controller/dwc/Makefile
> > +++ b/drivers/pci/controller/dwc/Makefile
> > @@ -8,7 +8,8 @@ obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
> > obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
> > obj-$(CONFIG_PCIE_SPEAR13XX) += pcie-spear13xx.o
> > obj-$(CONFIG_PCI_KEYSTONE) += pci-keystone.o
> > -obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o pci-layerscape-ep.o
> > +obj-$(CONFIG_PCI_LAYERSCAPE) += pci-layerscape.o
> > +obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
> > obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
> > obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
> > obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
> > --
> > 1.7.1
> >