Backlight brightness curves can have different shapes. The two main
types are linear and non-linear curves. The human eye doesn't
perceive linearly increasing/decreasing brightness as linear (see
also 88ba95bedb79 "backlight: pwm_bl: Compute brightness of LED
linearly to human eye"), hence many backlights use non-linear (often
logarithmic) brightness curves. The type of curve currently is opaque
to userspace, so userspace often uses more or less reliable heuristics
(like the number of brightness levels) to decide whether to treat a
backlight device as linear or non-linear.
Export the type of the brightness curve via the new sysfs attribute
'scale'. The value of the attribute may be a simple string like
'linear' or 'non-linear', or a composite string similar to
'compatible' strings of the device tree. A composite string consists
of different elements separated by commas, starting with the
most-detailed description and ending with the least-detailed one. An
example for a composite string is "cie-1931,perceptual,non-linear"
This brightness curve was generated with the CIE 1931 algorithm, it
is perceptually linear, but not actually linear in terms of the
emitted light. If userspace doesn't know about 'cie-1931' or
'perceptual' it should at least be able to interpret the 'non-linear'
part.
For devices that don't provide information about the scale of their
brightness curve the value of the 'scale' attribute is 'unknown'.
Signed-off-by: Matthias Kaehlcke <[email protected]>
---
Changes in v2:
- changed order of brightness scale enums, explicitly make 'unknown' zero
- minor update of commit message
- deleted excess blank line after 'backlight_scale_types'
- s/curves/curve/ in sysfs doc
---
.../ABI/testing/sysfs-class-backlight | 32 +++++++++++++++++++
MAINTAINERS | 1 +
drivers/video/backlight/backlight.c | 21 ++++++++++++
include/linux/backlight.h | 10 ++++++
4 files changed, 64 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-class-backlight
diff --git a/Documentation/ABI/testing/sysfs-class-backlight b/Documentation/ABI/testing/sysfs-class-backlight
new file mode 100644
index 000000000000..da1ce9e5c55a
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-backlight
@@ -0,0 +1,32 @@
+What: /sys/class/backlight/<backlight>/scale
+Date: June 2019
+KernelVersion: 5.4
+Contact: Daniel Thompson <[email protected]>
+Description:
+ Description of the scale of the brightness curve. The
+ description consists of one or more elements separated by
+ commas, from the most detailed to the least detailed
+ description.
+
+ Possible values are:
+
+ unknown
+ The scale of the brightness curve is unknown.
+
+ linear
+ The brightness changes linearly in terms of the emitted
+ light, changes are perceived as non-linear by the human eye.
+
+ non-linear
+ The brightness changes non-linearly in terms of the emitted
+ light, changes might be perceived as linear by the human eye.
+
+ perceptual,non-linear
+ The brightness changes non-linearly in terms of the emitted
+ light, changes should be perceived as linear by the human eye.
+
+ cie-1931,perceptual,non-linear
+ The brightness curve was calculated with the CIE 1931
+ algorithm. Brightness changes non-linearly in terms of the
+ emitted light, changes should be perceived as linear by the
+ human eye.
diff --git a/MAINTAINERS b/MAINTAINERS
index d51e74340870..c46812510ba5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2858,6 +2858,7 @@ F: include/linux/backlight.h
F: include/linux/pwm_backlight.h
F: Documentation/devicetree/bindings/leds/backlight
F: Documentation/ABI/stable/sysfs-class-backlight
+F: Documentation/ABI/testing/sysfs-class-backlight
BATMAN ADVANCED
M: Marek Lindner <[email protected]>
diff --git a/drivers/video/backlight/backlight.c b/drivers/video/backlight/backlight.c
index 1ef8b6fd62ac..86612ec42ed0 100644
--- a/drivers/video/backlight/backlight.c
+++ b/drivers/video/backlight/backlight.c
@@ -32,6 +32,14 @@ static const char *const backlight_types[] = {
[BACKLIGHT_FIRMWARE] = "firmware",
};
+static const char *const backlight_scale_types[] = {
+ [BACKLIGHT_SCALE_UNKNOWN] = "unknown",
+ [BACKLIGHT_SCALE_LINEAR] = "linear",
+ [BACKLIGHT_SCALE_NON_LINEAR] = "non-linear",
+ [BACKLIGHT_SCALE_PERCEPTUAL] = "perceptual,non-linear",
+ [BACKLIGHT_SCALE_CIE1931] = "cie-1931,perceptual,non-linear",
+};
+
#if defined(CONFIG_FB) || (defined(CONFIG_FB_MODULE) && \
defined(CONFIG_BACKLIGHT_CLASS_DEVICE_MODULE))
/* This callback gets called when something important happens inside a
@@ -246,6 +254,18 @@ static ssize_t actual_brightness_show(struct device *dev,
}
static DEVICE_ATTR_RO(actual_brightness);
+static ssize_t scale_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct backlight_device *bd = to_backlight_device(dev);
+
+ if (WARN_ON(bd->props.scale > BACKLIGHT_SCALE_NON_LINEAR))
+ return sprintf(buf, "unknown\n");
+
+ return sprintf(buf, "%s\n", backlight_scale_types[bd->props.scale]);
+}
+static DEVICE_ATTR_RO(scale);
+
static struct class *backlight_class;
#ifdef CONFIG_PM_SLEEP
@@ -292,6 +312,7 @@ static struct attribute *bl_device_attrs[] = {
&dev_attr_brightness.attr,
&dev_attr_actual_brightness.attr,
&dev_attr_max_brightness.attr,
+ &dev_attr_scale.attr,
&dev_attr_type.attr,
NULL,
};
diff --git a/include/linux/backlight.h b/include/linux/backlight.h
index 0b5897446dca..94d3559cd968 100644
--- a/include/linux/backlight.h
+++ b/include/linux/backlight.h
@@ -46,6 +46,14 @@ enum backlight_notification {
BACKLIGHT_UNREGISTERED,
};
+enum backlight_scale {
+ BACKLIGHT_SCALE_UNKNOWN = 0,
+ BACKLIGHT_SCALE_LINEAR,
+ BACKLIGHT_SCALE_NON_LINEAR, /* needed for backwards compatibility */
+ BACKLIGHT_SCALE_PERCEPTUAL,
+ BACKLIGHT_SCALE_CIE1931,
+};
+
struct backlight_device;
struct fb_info;
@@ -80,6 +88,8 @@ struct backlight_properties {
enum backlight_type type;
/* Flags used to signal drivers of state changes */
unsigned int state;
+ /* Type of the brightness scale (linear, non-linear, ...) */
+ enum backlight_scale scale;
#define BL_CORE_SUSPENDED (1 << 0) /* backlight is suspended */
#define BL_CORE_FBBLANK (1 << 1) /* backlight is under an fb blank event */
--
2.22.0.410.gd8fdbe21b5-goog
Hi!
> Export the type of the brightness curve via the new sysfs attribute
> 'scale'. The value of the attribute may be a simple string like
> 'linear' or 'non-linear', or a composite string similar to
> 'compatible' strings of the device tree. A composite string consists
> of different elements separated by commas, starting with the
> most-detailed description and ending with the least-detailed one. An
> example for a composite string is "cie-1931,perceptual,non-linear"
> This brightness curve was generated with the CIE 1931 algorithm, it
> is perceptually linear, but not actually linear in terms of the
> emitted light. If userspace doesn't know about 'cie-1931' or
> 'perceptual' it should at least be able to interpret the 'non-linear'
> part.
I'm not sure the comma-separated thing is a good idea. If it is, it should
go to the Documentation, not to changelog.
> +What: /sys/class/backlight/<backlight>/scale
> +Date: June 2019
> +KernelVersion: 5.4
> +Contact: Daniel Thompson <[email protected]>
> +Description:
> + Description of the scale of the brightness curve. The
> + description consists of one or more elements separated by
> + commas, from the most detailed to the least detailed
> + description.
> +
> + Possible values are:
> +
> + unknown
> + The scale of the brightness curve is unknown.
> +
> + linear
> + The brightness changes linearly in terms of the emitted
> + light, changes are perceived as non-linear by the human eye.
> +
> + non-linear
> + The brightness changes non-linearly in terms of the emitted
> + light, changes might be perceived as linear by the human eye.
non-linear is not too useful as described.
> + perceptual,non-linear
> + The brightness changes non-linearly in terms of the emitted
> + light, changes should be perceived as linear by the human eye.
> +
> + cie-1931,perceptual,non-linear
> + The brightness curve was calculated with the CIE 1931
> + algorithm. Brightness changes non-linearly in terms of the
> + emitted light, changes should be perceived as linear by the
> + human eye.
Is it useful to know difference between perceptual, and cie-1931?
Would it be useful to export absolute values in some well-known units?
If I'm in dark room, I may want 100mW/m^2 of backlight... And it would
be nice if I could set same backlight intensity on all my devices easily.
Pavel
On Wed, Jun 26, 2019 at 04:56:11PM +0200, Pavel Machek wrote:
> Hi!
>
> > Export the type of the brightness curve via the new sysfs attribute
> > 'scale'. The value of the attribute may be a simple string like
> > 'linear' or 'non-linear', or a composite string similar to
> > 'compatible' strings of the device tree. A composite string consists
> > of different elements separated by commas, starting with the
> > most-detailed description and ending with the least-detailed one. An
> > example for a composite string is "cie-1931,perceptual,non-linear"
> > This brightness curve was generated with the CIE 1931 algorithm, it
> > is perceptually linear, but not actually linear in terms of the
> > emitted light. If userspace doesn't know about 'cie-1931' or
> > 'perceptual' it should at least be able to interpret the 'non-linear'
> > part.
>
> I'm not sure the comma-separated thing is a good idea. If it is, it should
> go to the Documentation, not to changelog.
So I viewed the comma-separated thing as allow us to describe facts about
the scale used.
In particular I suspect that some controllers will be non-linear *and*
non-perceptual and that some userspaces, particularly those that animate
backlight changes, may care enough about the difference to ask us to add
another fact to the set that describes that scale.
Having said that I do share your concern that the comma-separated list
is overengineered and that all userspaces will end up implementing
something like:
if (strstr("non-linear", scale) {
mode = PERCEPTUAL;
} else if (strstr("unknown", scale) {
mode = use_existing_hueristic();
} else {
mode = LINEAR;
}
> > +What: /sys/class/backlight/<backlight>/scale
> > +Date: June 2019
> > +KernelVersion: 5.4
> > +Contact: Daniel Thompson <[email protected]>
> > +Description:
> > + Description of the scale of the brightness curve. The
> > + description consists of one or more elements separated by
> > + commas, from the most detailed to the least detailed
> > + description.
> > +
> > + Possible values are:
> > +
> > + unknown
> > + The scale of the brightness curve is unknown.
> > +
> > + linear
> > + The brightness changes linearly in terms of the emitted
> > + light, changes are perceived as non-linear by the human eye.
> > +
> > + non-linear
> > + The brightness changes non-linearly in terms of the emitted
> > + light, changes might be perceived as linear by the human eye.
>
> non-linear is not too useful as described.
Agree.
The idea is that allows a userspace with simple backlight needs to
simple map the brightness property directly to a slider using the
approach above without worrying about perceptual or (possible future)
logarithmic scales. Such an approach won't be perfect but it
probably won't feel horrible for the user either.
Arguably the descriptions should move away from the raw factual
approach and describe what advise the kernel of offering the
userspace.
> > + perceptual,non-linear
> > + The brightness changes non-linearly in terms of the emitted
> > + light, changes should be perceived as linear by the human eye.
> > +
> > + cie-1931,perceptual,non-linear
> > + The brightness curve was calculated with the CIE 1931
> > + algorithm. Brightness changes non-linearly in terms of the
> > + emitted light, changes should be perceived as linear by the
> > + human eye.
>
> Is it useful to know difference between perceptual, and cie-1931?
Depends how assertive the userspaces are!
If they follow the "fix kernel bugs in the kernel" mantra rather than
implement workarounds and heuristics then I suspect it would not be used
much.
> Would it be useful to export absolute values in some well-known units?
>
> If I'm in dark room, I may want 100mW/m^2 of backlight... And it would
> be nice if I could set same backlight intensity on all my devices
> easily.
I'm a little sceptical that we could calibrate an absolute scale on
enough devices for such a property to be useful. I think it would be
"unknown" on almost every system.
Daniel.
Hi,
On Fri, Jun 28, 2019 at 09:34:52AM +0100, Daniel Thompson wrote:
> On Wed, Jun 26, 2019 at 04:56:11PM +0200, Pavel Machek wrote:
> > Hi!
> >
> > > Export the type of the brightness curve via the new sysfs attribute
> > > 'scale'. The value of the attribute may be a simple string like
> > > 'linear' or 'non-linear', or a composite string similar to
> > > 'compatible' strings of the device tree. A composite string consists
> > > of different elements separated by commas, starting with the
> > > most-detailed description and ending with the least-detailed one. An
> > > example for a composite string is "cie-1931,perceptual,non-linear"
> > > This brightness curve was generated with the CIE 1931 algorithm, it
> > > is perceptually linear, but not actually linear in terms of the
> > > emitted light. If userspace doesn't know about 'cie-1931' or
> > > 'perceptual' it should at least be able to interpret the 'non-linear'
> > > part.
> >
> > I'm not sure the comma-separated thing is a good idea. If it is, it should
> > go to the Documentation, not to changelog.
>
> So I viewed the comma-separated thing as allow us to describe facts about
> the scale used.
>
> In particular I suspect that some controllers will be non-linear *and*
> non-perceptual and that some userspaces, particularly those that animate
> backlight changes, may care enough about the difference to ask us to add
> another fact to the set that describes that scale.
>
> Having said that I do share your concern that the comma-separated list
> is overengineered and that all userspaces will end up implementing
> something like:
>
> if (strstr("non-linear", scale) {
> mode = PERCEPTUAL;
> } else if (strstr("unknown", scale) {
> mode = use_existing_hueristic();
> } else {
> mode = LINEAR;
> }
I agree that this is not unlikely ...
So let's just make it 'linear', 'non-linear' and 'unknown'?
> > > +What: /sys/class/backlight/<backlight>/scale
> > > +Date: June 2019
> > > +KernelVersion: 5.4
> > > +Contact: Daniel Thompson <[email protected]>
> > > +Description:
> > > + Description of the scale of the brightness curve. The
> > > + description consists of one or more elements separated by
> > > + commas, from the most detailed to the least detailed
> > > + description.
> > > +
> > > + Possible values are:
> > > +
> > > + unknown
> > > + The scale of the brightness curve is unknown.
> > > +
> > > + linear
> > > + The brightness changes linearly in terms of the emitted
> > > + light, changes are perceived as non-linear by the human eye.
> > > +
> > > + non-linear
> > > + The brightness changes non-linearly in terms of the emitted
> > > + light, changes might be perceived as linear by the human eye.
> >
> > non-linear is not too useful as described.
>
> Agree.
>
> The idea is that allows a userspace with simple backlight needs to
> simple map the brightness property directly to a slider using the
> approach above without worrying about perceptual or (possible future)
> logarithmic scales. Such an approach won't be perfect but it
> probably won't feel horrible for the user either.
>
> Arguably the descriptions should move away from the raw factual
> approach and describe what advise the kernel of offering the
> userspace.
ok, I'll change it in the next revision
> > > + perceptual,non-linear
> > > + The brightness changes non-linearly in terms of the emitted
> > > + light, changes should be perceived as linear by the human eye.
> > > +
> > > + cie-1931,perceptual,non-linear
> > > + The brightness curve was calculated with the CIE 1931
> > > + algorithm. Brightness changes non-linearly in terms of the
> > > + emitted light, changes should be perceived as linear by the
> > > + human eye.
> >
> > Is it useful to know difference between perceptual, and cie-1931?
>
> Depends how assertive the userspaces are!
>
> If they follow the "fix kernel bugs in the kernel" mantra rather than
> implement workarounds and heuristics then I suspect it would not be used
> much.
>
>
> > Would it be useful to export absolute values in some well-known units?
> >
> > If I'm in dark room, I may want 100mW/m^2 of backlight... And it would
> > be nice if I could set same backlight intensity on all my devices
> > easily.
>
> I'm a little sceptical that we could calibrate an absolute scale on
> enough devices for such a property to be useful. I think it would be
> "unknown" on almost every system.
I share your scepticism and would expect most devices to remain
"unknown"