The Lenovo Miix 630 is one of three ARM based (specifically Qualcomm
MSM8998) laptops that comes with Windows, and seems to have a dedicated
following of folks intrested to get Linux up and running on it.
This series adds support for the basic functionality this is validated
towork using devicetree. Although the laptops do feed ACPI to Windows,
the existing MSM8998 support in mainline is DT based, so DT provides a
quick path to functionality while ACPI support is investigated.
The three devices are very similar, but do have differences in the set
of peripherals supported, so the idea is that the vast majority of the
support for all three can live in a common include, which should reduce
overall duplication. Adding support for the other two devices is tacked
onto the end of the series.
The bleeding edge work for these laptops and work in progress can be
found at https://github.com/aarch64-laptops/prebuilt
v8:
-Used original Elan copyright for new header file
-Kept the DT ids in the Elan core driver instead of miving them to the
header
-Fixed "device" misspelling in new header
v7:
-Removed HID matching on compatible strings as it was determined to be
not needed
v6:
-Export the elan_i2c DT and ACPI ids so that hid-quirks can use them
-Use the elan_i2c ids within hid-quirks to reduce duplication
-Add DTs for the Asus and HP devices since the DT seems finalized, and
folks have been asking
v5:
-Split out elan_i2c changes into their own patch
-Use a static list of strings to match
-Fixed typo of "whitelist"
-Dropped incorrect thermal zones
-Dropped tags from Bjorn and Lee since the functional should be
identical, but the code is structured different
v4:
-Changed the hid-quirks ELAN handling around per Benjamin Tissoires
-Dropped new DT binding
v3:
-Changed "clam" to "clamshell"
-Defined a dt binding for the combo Elan keyboard + touchpad device
-Adjusted the HID quirk to be correct for dt boot
-Removed extranious comment in board dts
-Fixed board level compatible
v2:
-Changed "cls" to "clam" since feedback indicated "cls" is too opaque,
but
"clamshell" is a mouthfull. "clam" seems to be a happy medium.
Jeffrey Hugo (5):
Input: elan_i2c: Export the device id whitelist
HID: quirks: Refactor ELAN 400 and 401 handling
arm64: dts: qcom: Add Lenovo Miix 630
arm64: dts: qcom: Add HP Envy x2
arm64: dts: qcom: Add Asus NovaGo TP370QL
arch/arm64/boot/dts/qcom/Makefile | 3 +
.../dts/qcom/msm8998-asus-novago-tp370ql.dts | 47 ++++
.../boot/dts/qcom/msm8998-clamshell.dtsi | 240 ++++++++++++++++++
.../boot/dts/qcom/msm8998-hp-envy-x2.dts | 30 +++
.../boot/dts/qcom/msm8998-lenovo-miix-630.dts | 30 +++
drivers/hid/hid-quirks.c | 22 +-
drivers/input/mouse/elan_i2c_core.c | 50 +---
include/linux/input/elan-i2c-ids.h | 76 ++++++
8 files changed, 438 insertions(+), 60 deletions(-)
create mode 100644 arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts
create mode 100644 arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts
create mode 100644 arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
create mode 100644 include/linux/input/elan-i2c-ids.h
--
2.17.1
Elan_i2c and hid-quirks work in conjunction to decide which devices each
driver will handle. Elan_i2c has a whitelist of devices that should be
consumed by hid-quirks so that there is one master list of devices to
handoff between the drivers. Put the ids in a header file so that
hid-quirks can consume it instead of duplicating the list.
Signed-off-by: Jeffrey Hugo <[email protected]>
---
drivers/input/mouse/elan_i2c_core.c | 50 +------------------
include/linux/input/elan-i2c-ids.h | 76 +++++++++++++++++++++++++++++
2 files changed, 77 insertions(+), 49 deletions(-)
create mode 100644 include/linux/input/elan-i2c-ids.h
diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
index 65cd325eabc3..e2c824abd19c 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -37,6 +37,7 @@
#include <linux/completion.h>
#include <linux/of.h>
#include <linux/property.h>
+#include <linux/input/elan-i2c-ids.h>
#include <linux/regulator/consumer.h>
#include <asm/unaligned.h>
@@ -1375,55 +1376,6 @@ static const struct i2c_device_id elan_id[] = {
MODULE_DEVICE_TABLE(i2c, elan_id);
#ifdef CONFIG_ACPI
-static const struct acpi_device_id elan_acpi_id[] = {
- { "ELAN0000", 0 },
- { "ELAN0100", 0 },
- { "ELAN0600", 0 },
- { "ELAN0601", 0 },
- { "ELAN0602", 0 },
- { "ELAN0603", 0 },
- { "ELAN0604", 0 },
- { "ELAN0605", 0 },
- { "ELAN0606", 0 },
- { "ELAN0607", 0 },
- { "ELAN0608", 0 },
- { "ELAN0609", 0 },
- { "ELAN060B", 0 },
- { "ELAN060C", 0 },
- { "ELAN060F", 0 },
- { "ELAN0610", 0 },
- { "ELAN0611", 0 },
- { "ELAN0612", 0 },
- { "ELAN0615", 0 },
- { "ELAN0616", 0 },
- { "ELAN0617", 0 },
- { "ELAN0618", 0 },
- { "ELAN0619", 0 },
- { "ELAN061A", 0 },
- { "ELAN061B", 0 },
- { "ELAN061C", 0 },
- { "ELAN061D", 0 },
- { "ELAN061E", 0 },
- { "ELAN061F", 0 },
- { "ELAN0620", 0 },
- { "ELAN0621", 0 },
- { "ELAN0622", 0 },
- { "ELAN0623", 0 },
- { "ELAN0624", 0 },
- { "ELAN0625", 0 },
- { "ELAN0626", 0 },
- { "ELAN0627", 0 },
- { "ELAN0628", 0 },
- { "ELAN0629", 0 },
- { "ELAN062A", 0 },
- { "ELAN062B", 0 },
- { "ELAN062C", 0 },
- { "ELAN062D", 0 },
- { "ELAN0631", 0 },
- { "ELAN0632", 0 },
- { "ELAN1000", 0 },
- { }
-};
MODULE_DEVICE_TABLE(acpi, elan_acpi_id);
#endif
diff --git a/include/linux/input/elan-i2c-ids.h b/include/linux/input/elan-i2c-ids.h
new file mode 100644
index 000000000000..ceabb01a6a7d
--- /dev/null
+++ b/include/linux/input/elan-i2c-ids.h
@@ -0,0 +1,76 @@
+/*
+ * Elan I2C/SMBus Touchpad device whitelist
+ *
+ * Copyright (c) 2013 ELAN Microelectronics Corp.
+ *
+ * Author: æ維 (Duson Lin) <[email protected]>
+ * Author: KT Liao <[email protected]>
+ * Version: 1.6.3
+ *
+ * Based on cyapa driver:
+ * copyright (c) 2011-2012 Cypress Semiconductor, Inc.
+ * copyright (c) 2011-2012 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Trademarks are the property of their respective owners.
+ */
+
+#ifndef __ELAN_I2C_IDS_H
+#define __ELAN_I2C_IDS_H
+
+#include <linux/mod_devicetable.h>
+
+static const struct acpi_device_id elan_acpi_id[] = {
+ { "ELAN0000", 0 },
+ { "ELAN0100", 0 },
+ { "ELAN0600", 0 },
+ { "ELAN0601", 0 },
+ { "ELAN0602", 0 },
+ { "ELAN0603", 0 },
+ { "ELAN0604", 0 },
+ { "ELAN0605", 0 },
+ { "ELAN0606", 0 },
+ { "ELAN0607", 0 },
+ { "ELAN0608", 0 },
+ { "ELAN0609", 0 },
+ { "ELAN060B", 0 },
+ { "ELAN060C", 0 },
+ { "ELAN060F", 0 },
+ { "ELAN0610", 0 },
+ { "ELAN0611", 0 },
+ { "ELAN0612", 0 },
+ { "ELAN0615", 0 },
+ { "ELAN0616", 0 },
+ { "ELAN0617", 0 },
+ { "ELAN0618", 0 },
+ { "ELAN0619", 0 },
+ { "ELAN061A", 0 },
+ { "ELAN061B", 0 },
+ { "ELAN061C", 0 },
+ { "ELAN061D", 0 },
+ { "ELAN061E", 0 },
+ { "ELAN061F", 0 },
+ { "ELAN0620", 0 },
+ { "ELAN0621", 0 },
+ { "ELAN0622", 0 },
+ { "ELAN0623", 0 },
+ { "ELAN0624", 0 },
+ { "ELAN0625", 0 },
+ { "ELAN0626", 0 },
+ { "ELAN0627", 0 },
+ { "ELAN0628", 0 },
+ { "ELAN0629", 0 },
+ { "ELAN062A", 0 },
+ { "ELAN062B", 0 },
+ { "ELAN062C", 0 },
+ { "ELAN062D", 0 },
+ { "ELAN0631", 0 },
+ { "ELAN0632", 0 },
+ { "ELAN1000", 0 },
+ { }
+};
+
+#endif /* __ELAN_I2C_IDS_H */
--
2.17.1
There needs to be coordination between hid-quirks and the elan_i2c driver
about which devices are handled by what drivers. Currently, both use
whitelists, which results in valid devices being unhandled by default,
when they should not be rejected by hid-quirks. This is quickly becoming
an issue.
Since elan_i2c has a maintained whitelist of what devices it will handle,
which is now in a header file that hid-quirks can access, use that to
implement a blacklist in hid-quirks so that only the devices that need to
be handled by elan_i2c get rejected by hid-quirks, and everything else is
handled by default.
Suggested-by: Benjamin Tissoires <[email protected]>
Signed-off-by: Jeffrey Hugo <[email protected]>
Acked-by: Benjamin Tissoires <[email protected]>
---
drivers/hid/hid-quirks.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
index e5ca6fe2ca57..48ed4caf0ebc 100644
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -16,6 +16,7 @@
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/mutex.h>
+#include <linux/input/elan-i2c-ids.h>
#include "hid-ids.h"
@@ -914,6 +915,8 @@ static const struct hid_device_id hid_mouse_ignore_list[] = {
bool hid_ignore(struct hid_device *hdev)
{
+ int i;
+
if (hdev->quirks & HID_QUIRK_NO_IGNORE)
return false;
if (hdev->quirks & HID_QUIRK_IGNORE)
@@ -978,18 +981,15 @@ bool hid_ignore(struct hid_device *hdev)
break;
case USB_VENDOR_ID_ELAN:
/*
- * Many Elan devices have a product id of 0x0401 and are handled
- * by the elan_i2c input driver. But the ACPI HID ELAN0800 dev
- * is not (and cannot be) handled by that driver ->
- * Ignore all 0x0401 devs except for the ELAN0800 dev.
+ * Blacklist of everything that gets handled by the elan_i2c
+ * input driver. This avoids disabling valid touchpads and
+ * other ELAN devices.
*/
- if (hdev->product == 0x0401 &&
- strncmp(hdev->name, "ELAN0800", 8) != 0)
- return true;
- /* Same with product id 0x0400 */
- if (hdev->product == 0x0400 &&
- strncmp(hdev->name, "QTEC0001", 8) != 0)
- return true;
+ if ((hdev->product == 0x0401 || hdev->product == 0x0400))
+ for (i = 0; strlen(elan_acpi_id[i].id); ++i)
+ if (!strncmp(hdev->name, elan_acpi_id[i].id,
+ strlen(elan_acpi_id[i].id)))
+ return true;
break;
}
--
2.17.1
This adds the initial DT for the Lenovo Miix 630 laptop. Supported
functionality includes USB (host), microSD-card, keyboard, and trackpad.
Signed-off-by: Jeffrey Hugo <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/msm8998-clamshell.dtsi | 240 ++++++++++++++++++
.../boot/dts/qcom/msm8998-lenovo-miix-630.dts | 30 +++
3 files changed, 271 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 21d548f02d39..c3e4307bcbd4 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
new file mode 100644
index 000000000000..9682d4dd7496
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
+
+/*
+ * Common include for MSM8998 clamshell devices, ie the Lenovo Miix 630,
+ * Asus NovaGo TP370QL, and HP Envy x2. All three devices are basically the
+ * same, with differences in peripherals.
+ */
+
+#include "msm8998.dtsi"
+#include "pm8998.dtsi"
+#include "pm8005.dtsi"
+
+/ {
+ chosen {
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-always-on;
+ regulator-boot-on;
+ };
+};
+
+&qusb2phy {
+ status = "okay";
+
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&rpm_requests {
+ pm8998-regulators {
+ compatible = "qcom,rpm-pm8998-regulators";
+
+ vdd_s1-supply = <&vph_pwr>;
+ vdd_s2-supply = <&vph_pwr>;
+ vdd_s3-supply = <&vph_pwr>;
+ vdd_s4-supply = <&vph_pwr>;
+ vdd_s5-supply = <&vph_pwr>;
+ vdd_s6-supply = <&vph_pwr>;
+ vdd_s7-supply = <&vph_pwr>;
+ vdd_s8-supply = <&vph_pwr>;
+ vdd_s9-supply = <&vph_pwr>;
+ vdd_s10-supply = <&vph_pwr>;
+ vdd_s11-supply = <&vph_pwr>;
+ vdd_s12-supply = <&vph_pwr>;
+ vdd_s13-supply = <&vph_pwr>;
+ vdd_l1_l27-supply = <&vreg_s7a_1p025>;
+ vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
+ vdd_l3_l11-supply = <&vreg_s7a_1p025>;
+ vdd_l4_l5-supply = <&vreg_s7a_1p025>;
+ vdd_l6-supply = <&vreg_s5a_2p04>;
+ vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
+ vdd_l9-supply = <&vph_pwr>;
+ vdd_l10_l23_l25-supply = <&vph_pwr>;
+ vdd_l13_l19_l21-supply = <&vph_pwr>;
+ vdd_l16_l28-supply = <&vph_pwr>;
+ vdd_l18_l22-supply = <&vph_pwr>;
+ vdd_l20_l24-supply = <&vph_pwr>;
+ vdd_l26-supply = <&vreg_s3a_1p35>;
+ vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
+
+ vreg_s3a_1p35: s3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+ vreg_s4a_1p8: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ };
+ vreg_s5a_2p04: s5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ };
+ vreg_s7a_1p025: s7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1028000>;
+ };
+ vreg_l1a_0p875: l1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-allow-set-load;
+ };
+ vreg_l2a_1p2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-allow-set-load;
+ };
+ vreg_l3a_1p0: l3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+ vreg_l5a_0p8: l5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+ vreg_l6a_1p8: l6 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <1808000>;
+ };
+ vreg_l7a_1p8: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l8a_1p2: l8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vreg_l9a_1p8: l9 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l10a_1p8: l10 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l11a_1p0: l11 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+ vreg_l12a_1p8: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l13a_2p95: l13 {
+ regulator-min-microvolt = <1808000>;
+ regulator-max-microvolt = <2960000>;
+ };
+ vreg_l14a_1p88: l14 {
+ regulator-min-microvolt = <1880000>;
+ regulator-max-microvolt = <1880000>;
+ };
+ vreg_15a_1p8: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ vreg_l16a_2p7: l16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ };
+ vreg_l17a_1p3: l17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ };
+ vreg_l18a_2p7: l18 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ };
+ vreg_l19a_3p0: l19 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ };
+ vreg_l20a_2p95: l20 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-allow-set-load;
+ };
+ vreg_l21a_2p95: l21 {
+ regulator-min-microvolt = <2960000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-allow-set-load;
+ regulator-system-load = <800000>;
+ };
+ vreg_l22a_2p85: l22 {
+ regulator-min-microvolt = <2864000>;
+ regulator-max-microvolt = <2864000>;
+ };
+ vreg_l23a_3p3: l23 {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3312000>;
+ };
+ vreg_l24a_3p075: l24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ };
+ vreg_l25a_3p3: l25 {
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3312000>;
+ };
+ vreg_l26a_1p2: l26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ vreg_l28_3p0: l28 {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ };
+
+ vreg_lvs1a_1p8: lvs1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_lvs2a_1p8: lvs2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <0 4>, <81 4>;
+
+ touchpad: touchpad {
+ config {
+ pins = "gpio123";
+ bias-pull-up; /* pull up */
+ };
+ };
+};
+
+&sdhc2 {
+ status = "okay";
+
+ vmmc-supply = <&vreg_l21a_2p95>;
+ vqmmc-supply = <&vreg_l13a_2p95>;
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ dr_mode = "host"; /* Force to host until we have Type-C hooked up */
+};
+
+&usb3phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l1a_0p875>;
+ vdda-pll-supply = <&vreg_l2a_1p2>;
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
new file mode 100644
index 000000000000..407c6a32911c
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998-clamshell.dtsi"
+
+/ {
+ model = "Lenovo Miix 630";
+ compatible = "lenovo,miix-630", "qcom,msm8998";
+};
+
+&blsp1_i2c6 {
+ status = "okay";
+
+ keyboard@3a {
+ compatible = "hid-over-i2c";
+ interrupt-parent = <&tlmm>;
+ interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x3a>;
+ hid-descr-addr = <0x0001>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchpad>;
+ };
+};
+
+&sdhc2 {
+ cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+};
--
2.17.1
This adds the initial DT for the HP Envy x2 laptop. Supported
functionality includes USB (host), microSD-card, keyboard, and trackpad.
Signed-off-by: Jeffrey Hugo <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/msm8998-hp-envy-x2.dts | 30 +++++++++++++++++++
2 files changed, 31 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index c3e4307bcbd4..76436f33a013 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts
new file mode 100644
index 000000000000..24073127091f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998-clamshell.dtsi"
+
+/ {
+ model = "HP Envy x2";
+ compatible = "hp,envy-x2", "qcom,msm8998";
+};
+
+&blsp1_i2c6 {
+ status = "okay";
+
+ keyboard@3a {
+ compatible = "hid-over-i2c";
+ interrupt-parent = <&tlmm>;
+ interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x3a>;
+ hid-descr-addr = <0x0001>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchpad>;
+ };
+};
+
+&sdhc2 {
+ cd-gpios = <&tlmm 95 GPIO_ACTIVE_LOW>;
+};
--
2.17.1
This adds the initial DT for the Asus NovaGo TP370QL laptop. Supported
functionality includes USB (host), microSD-card, keyboard, and trackpad.
Signed-off-by: Jeffrey Hugo <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../dts/qcom/msm8998-asus-novago-tp370ql.dts | 47 +++++++++++++++++++
2 files changed, 48 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 76436f33a013..5cd1844a6d33 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts
new file mode 100644
index 000000000000..db5821be1e2f
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
+
+/dts-v1/;
+
+#include "msm8998-clamshell.dtsi"
+
+/ {
+ model = "Asus NovaGo TP370QL";
+ compatible = "asus,novago-tp370ql", "qcom,msm8998";
+};
+
+&blsp1_i2c6 {
+ status = "okay";
+
+ touchpad@15 {
+ compatible = "hid-over-i2c";
+ interrupt-parent = <&tlmm>;
+ interrupts = <0x7b IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x15>;
+ hid-descr-addr = <0x0001>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchpad>;
+ };
+
+ keyboard@3a {
+ compatible = "hid-over-i2c";
+ interrupt-parent = <&tlmm>;
+ interrupts = <0x25 IRQ_TYPE_LEVEL_LOW>;
+ reg = <0x3a>;
+ hid-descr-addr = <0x0001>;
+ };
+};
+
+&sdhc2 {
+ cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
+};
+
+&tlmm {
+ touchpad: touchpad {
+ config {
+ pins = "gpio123";
+ bias-pull-up;
+ };
+ };
+};
--
2.17.1
On Fri, Jun 21, 2019 at 07:50:42AM -0700, Jeffrey Hugo wrote:
> Elan_i2c and hid-quirks work in conjunction to decide which devices each
> driver will handle. Elan_i2c has a whitelist of devices that should be
> consumed by hid-quirks so that there is one master list of devices to
> handoff between the drivers. Put the ids in a header file so that
> hid-quirks can consume it instead of duplicating the list.
>
> Signed-off-by: Jeffrey Hugo <[email protected]>
Benjamin, are you happy with this version?
Thanks.
--
Dmitry
On Sun, Jun 23, 2019 at 12:20 AM Dmitry Torokhov
<[email protected]> wrote:
>
> On Fri, Jun 21, 2019 at 07:50:42AM -0700, Jeffrey Hugo wrote:
> > Elan_i2c and hid-quirks work in conjunction to decide which devices each
> > driver will handle. Elan_i2c has a whitelist of devices that should be
> > consumed by hid-quirks so that there is one master list of devices to
> > handoff between the drivers. Put the ids in a header file so that
> > hid-quirks can consume it instead of duplicating the list.
> >
> > Signed-off-by: Jeffrey Hugo <[email protected]>
>
> Benjamin, are you happy with this version?
Benjamin, ping?
Sorry to be a bother, but I'm still anxious to get this queued for 5.3.
On Thu, Jun 27, 2019 at 4:02 PM Jeffrey Hugo <[email protected]> wrote:
>
> On Sun, Jun 23, 2019 at 12:20 AM Dmitry Torokhov
> <[email protected]> wrote:
> >
> > On Fri, Jun 21, 2019 at 07:50:42AM -0700, Jeffrey Hugo wrote:
> > > Elan_i2c and hid-quirks work in conjunction to decide which devices each
> > > driver will handle. Elan_i2c has a whitelist of devices that should be
> > > consumed by hid-quirks so that there is one master list of devices to
> > > handoff between the drivers. Put the ids in a header file so that
> > > hid-quirks can consume it instead of duplicating the list.
> > >
> > > Signed-off-by: Jeffrey Hugo <[email protected]>
> >
> > Benjamin, are you happy with this version?
>
> Benjamin, ping?
> Sorry to be a bother, but I'm still anxious to get this queued for 5.3.
Ooops, yeah, sorry I missed Dmitry's email.
Fine by me:
Acked-by: Benjamin Tissoires <[email protected]>
Cheers,
Benjamin
On Thu, Jun 27, 2019 at 04:29:29PM +0200, Benjamin Tissoires wrote:
> On Thu, Jun 27, 2019 at 4:02 PM Jeffrey Hugo <[email protected]> wrote:
> >
> > On Sun, Jun 23, 2019 at 12:20 AM Dmitry Torokhov
> > <[email protected]> wrote:
> > >
> > > On Fri, Jun 21, 2019 at 07:50:42AM -0700, Jeffrey Hugo wrote:
> > > > Elan_i2c and hid-quirks work in conjunction to decide which devices each
> > > > driver will handle. Elan_i2c has a whitelist of devices that should be
> > > > consumed by hid-quirks so that there is one master list of devices to
> > > > handoff between the drivers. Put the ids in a header file so that
> > > > hid-quirks can consume it instead of duplicating the list.
> > > >
> > > > Signed-off-by: Jeffrey Hugo <[email protected]>
> > >
> > > Benjamin, are you happy with this version?
> >
> > Benjamin, ping?
> > Sorry to be a bother, but I'm still anxious to get this queued for 5.3.
>
> Ooops, yeah, sorry I missed Dmitry's email.
>
> Fine by me:
> Acked-by: Benjamin Tissoires <[email protected]>
Applied, thank you.
--
Dmitry
On Fri, Jun 21, 2019 at 07:53:12AM -0700, Jeffrey Hugo wrote:
> There needs to be coordination between hid-quirks and the elan_i2c driver
> about which devices are handled by what drivers. Currently, both use
> whitelists, which results in valid devices being unhandled by default,
> when they should not be rejected by hid-quirks. This is quickly becoming
> an issue.
>
> Since elan_i2c has a maintained whitelist of what devices it will handle,
> which is now in a header file that hid-quirks can access, use that to
> implement a blacklist in hid-quirks so that only the devices that need to
> be handled by elan_i2c get rejected by hid-quirks, and everything else is
> handled by default.
>
> Suggested-by: Benjamin Tissoires <[email protected]>
> Signed-off-by: Jeffrey Hugo <[email protected]>
> Acked-by: Benjamin Tissoires <[email protected]>
Applied, thank you.
> ---
> drivers/hid/hid-quirks.c | 22 +++++++++++-----------
> 1 file changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c
> index e5ca6fe2ca57..48ed4caf0ebc 100644
> --- a/drivers/hid/hid-quirks.c
> +++ b/drivers/hid/hid-quirks.c
> @@ -16,6 +16,7 @@
> #include <linux/export.h>
> #include <linux/slab.h>
> #include <linux/mutex.h>
> +#include <linux/input/elan-i2c-ids.h>
>
> #include "hid-ids.h"
>
> @@ -914,6 +915,8 @@ static const struct hid_device_id hid_mouse_ignore_list[] = {
>
> bool hid_ignore(struct hid_device *hdev)
> {
> + int i;
> +
> if (hdev->quirks & HID_QUIRK_NO_IGNORE)
> return false;
> if (hdev->quirks & HID_QUIRK_IGNORE)
> @@ -978,18 +981,15 @@ bool hid_ignore(struct hid_device *hdev)
> break;
> case USB_VENDOR_ID_ELAN:
> /*
> - * Many Elan devices have a product id of 0x0401 and are handled
> - * by the elan_i2c input driver. But the ACPI HID ELAN0800 dev
> - * is not (and cannot be) handled by that driver ->
> - * Ignore all 0x0401 devs except for the ELAN0800 dev.
> + * Blacklist of everything that gets handled by the elan_i2c
> + * input driver. This avoids disabling valid touchpads and
> + * other ELAN devices.
> */
> - if (hdev->product == 0x0401 &&
> - strncmp(hdev->name, "ELAN0800", 8) != 0)
> - return true;
> - /* Same with product id 0x0400 */
> - if (hdev->product == 0x0400 &&
> - strncmp(hdev->name, "QTEC0001", 8) != 0)
> - return true;
> + if ((hdev->product == 0x0401 || hdev->product == 0x0400))
> + for (i = 0; strlen(elan_acpi_id[i].id); ++i)
> + if (!strncmp(hdev->name, elan_acpi_id[i].id,
> + strlen(elan_acpi_id[i].id)))
> + return true;
> break;
> }
>
> --
> 2.17.1
>
--
Dmitry
On Fri 21 Jun 07:54 PDT 2019, Jeffrey Hugo wrote:
> This adds the initial DT for the Lenovo Miix 630 laptop. Supported
> functionality includes USB (host), microSD-card, keyboard, and trackpad.
>
> Signed-off-by: Jeffrey Hugo <[email protected]>
Applied patch 3-5
Thanks,
Bjorn
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/msm8998-clamshell.dtsi | 240 ++++++++++++++++++
> .../boot/dts/qcom/msm8998-lenovo-miix-630.dts | 30 +++
> 3 files changed, 271 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 21d548f02d39..c3e4307bcbd4 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
> dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
> new file mode 100644
> index 000000000000..9682d4dd7496
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
> @@ -0,0 +1,240 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
> +
> +/*
> + * Common include for MSM8998 clamshell devices, ie the Lenovo Miix 630,
> + * Asus NovaGo TP370QL, and HP Envy x2. All three devices are basically the
> + * same, with differences in peripherals.
> + */
> +
> +#include "msm8998.dtsi"
> +#include "pm8998.dtsi"
> +#include "pm8005.dtsi"
> +
> +/ {
> + chosen {
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&qusb2phy {
> + status = "okay";
> +
> + vdda-pll-supply = <&vreg_l12a_1p8>;
> + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
> +};
> +
> +&rpm_requests {
> + pm8998-regulators {
> + compatible = "qcom,rpm-pm8998-regulators";
> +
> + vdd_s1-supply = <&vph_pwr>;
> + vdd_s2-supply = <&vph_pwr>;
> + vdd_s3-supply = <&vph_pwr>;
> + vdd_s4-supply = <&vph_pwr>;
> + vdd_s5-supply = <&vph_pwr>;
> + vdd_s6-supply = <&vph_pwr>;
> + vdd_s7-supply = <&vph_pwr>;
> + vdd_s8-supply = <&vph_pwr>;
> + vdd_s9-supply = <&vph_pwr>;
> + vdd_s10-supply = <&vph_pwr>;
> + vdd_s11-supply = <&vph_pwr>;
> + vdd_s12-supply = <&vph_pwr>;
> + vdd_s13-supply = <&vph_pwr>;
> + vdd_l1_l27-supply = <&vreg_s7a_1p025>;
> + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>;
> + vdd_l3_l11-supply = <&vreg_s7a_1p025>;
> + vdd_l4_l5-supply = <&vreg_s7a_1p025>;
> + vdd_l6-supply = <&vreg_s5a_2p04>;
> + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>;
> + vdd_l9-supply = <&vph_pwr>;
> + vdd_l10_l23_l25-supply = <&vph_pwr>;
> + vdd_l13_l19_l21-supply = <&vph_pwr>;
> + vdd_l16_l28-supply = <&vph_pwr>;
> + vdd_l18_l22-supply = <&vph_pwr>;
> + vdd_l20_l24-supply = <&vph_pwr>;
> + vdd_l26-supply = <&vreg_s3a_1p35>;
> + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>;
> +
> + vreg_s3a_1p35: s3 {
> + regulator-min-microvolt = <1352000>;
> + regulator-max-microvolt = <1352000>;
> + };
> + vreg_s4a_1p8: s4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-allow-set-load;
> + };
> + vreg_s5a_2p04: s5 {
> + regulator-min-microvolt = <1904000>;
> + regulator-max-microvolt = <2040000>;
> + };
> + vreg_s7a_1p025: s7 {
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <1028000>;
> + };
> + vreg_l1a_0p875: l1 {
> + regulator-min-microvolt = <880000>;
> + regulator-max-microvolt = <880000>;
> + regulator-allow-set-load;
> + };
> + vreg_l2a_1p2: l2 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + regulator-allow-set-load;
> + };
> + vreg_l3a_1p0: l3 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> + vreg_l5a_0p8: l5 {
> + regulator-min-microvolt = <800000>;
> + regulator-max-microvolt = <800000>;
> + };
> + vreg_l6a_1p8: l6 {
> + regulator-min-microvolt = <1808000>;
> + regulator-max-microvolt = <1808000>;
> + };
> + vreg_l7a_1p8: l7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + vreg_l8a_1p2: l8 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> + vreg_l9a_1p8: l9 {
> + regulator-min-microvolt = <1808000>;
> + regulator-max-microvolt = <2960000>;
> + };
> + vreg_l10a_1p8: l10 {
> + regulator-min-microvolt = <1808000>;
> + regulator-max-microvolt = <2960000>;
> + };
> + vreg_l11a_1p0: l11 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + };
> + vreg_l12a_1p8: l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + vreg_l13a_2p95: l13 {
> + regulator-min-microvolt = <1808000>;
> + regulator-max-microvolt = <2960000>;
> + };
> + vreg_l14a_1p88: l14 {
> + regulator-min-microvolt = <1880000>;
> + regulator-max-microvolt = <1880000>;
> + };
> + vreg_15a_1p8: l15 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> + vreg_l16a_2p7: l16 {
> + regulator-min-microvolt = <2704000>;
> + regulator-max-microvolt = <2704000>;
> + };
> + vreg_l17a_1p3: l17 {
> + regulator-min-microvolt = <1304000>;
> + regulator-max-microvolt = <1304000>;
> + };
> + vreg_l18a_2p7: l18 {
> + regulator-min-microvolt = <2704000>;
> + regulator-max-microvolt = <2704000>;
> + };
> + vreg_l19a_3p0: l19 {
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3008000>;
> + };
> + vreg_l20a_2p95: l20 {
> + regulator-min-microvolt = <2960000>;
> + regulator-max-microvolt = <2960000>;
> + regulator-allow-set-load;
> + };
> + vreg_l21a_2p95: l21 {
> + regulator-min-microvolt = <2960000>;
> + regulator-max-microvolt = <2960000>;
> + regulator-allow-set-load;
> + regulator-system-load = <800000>;
> + };
> + vreg_l22a_2p85: l22 {
> + regulator-min-microvolt = <2864000>;
> + regulator-max-microvolt = <2864000>;
> + };
> + vreg_l23a_3p3: l23 {
> + regulator-min-microvolt = <3312000>;
> + regulator-max-microvolt = <3312000>;
> + };
> + vreg_l24a_3p075: l24 {
> + regulator-min-microvolt = <3088000>;
> + regulator-max-microvolt = <3088000>;
> + };
> + vreg_l25a_3p3: l25 {
> + regulator-min-microvolt = <3104000>;
> + regulator-max-microvolt = <3312000>;
> + };
> + vreg_l26a_1p2: l26 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> + vreg_l28_3p0: l28 {
> + regulator-min-microvolt = <3008000>;
> + regulator-max-microvolt = <3008000>;
> + };
> +
> + vreg_lvs1a_1p8: lvs1 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + vreg_lvs2a_1p8: lvs2 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + };
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <0 4>, <81 4>;
> +
> + touchpad: touchpad {
> + config {
> + pins = "gpio123";
> + bias-pull-up; /* pull up */
> + };
> + };
> +};
> +
> +&sdhc2 {
> + status = "okay";
> +
> + vmmc-supply = <&vreg_l21a_2p95>;
> + vqmmc-supply = <&vreg_l13a_2p95>;
> +
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
> + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> +};
> +
> +&usb3 {
> + status = "okay";
> +};
> +
> +&usb3_dwc3 {
> + dr_mode = "host"; /* Force to host until we have Type-C hooked up */
> +};
> +
> +&usb3phy {
> + status = "okay";
> +
> + vdda-phy-supply = <&vreg_l1a_0p875>;
> + vdda-pll-supply = <&vreg_l2a_1p2>;
> +};
> diff --git a/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
> new file mode 100644
> index 000000000000..407c6a32911c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dts
> @@ -0,0 +1,30 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright (c) 2019, Jeffrey Hugo. All rights reserved. */
> +
> +/dts-v1/;
> +
> +#include "msm8998-clamshell.dtsi"
> +
> +/ {
> + model = "Lenovo Miix 630";
> + compatible = "lenovo,miix-630", "qcom,msm8998";
> +};
> +
> +&blsp1_i2c6 {
> + status = "okay";
> +
> + keyboard@3a {
> + compatible = "hid-over-i2c";
> + interrupt-parent = <&tlmm>;
> + interrupts = <0x79 IRQ_TYPE_LEVEL_LOW>;
> + reg = <0x3a>;
> + hid-descr-addr = <0x0001>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&touchpad>;
> + };
> +};
> +
> +&sdhc2 {
> + cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>;
> +};
> --
> 2.17.1
>