2019-07-09 12:16:36

by Santosh Sivaraj

[permalink] [raw]
Subject: [v5 0/6] powerpc: implement machine check safe memcpy

During a memcpy from a pmem device, if a machine check exception is
generated we end up in a panic. In case of fsdax read, this should
only result in a -EIO. Avoid MCE by implementing memcpy_mcsafe.

Before this patch series:

```
bash-4.4# mount -o dax /dev/pmem0 /mnt/pmem/
[ 7621.714094] Disabling lock debugging due to kernel taint
[ 7621.714099] MCE: CPU0: machine check (Severe) Host UE Load/Store [Not recovered]
[ 7621.714104] MCE: CPU0: NIP: [c000000000088978] memcpy_power7+0x418/0x7e0
[ 7621.714107] MCE: CPU0: Hardware error
[ 7621.714112] opal: Hardware platform error: Unrecoverable Machine Check exception
[ 7621.714118] CPU: 0 PID: 1368 Comm: mount Tainted: G M 5.2.0-rc5-00239-g241e39004581 #50
[ 7621.714123] NIP: c000000000088978 LR: c0000000008e16f8 CTR: 00000000000001de
[ 7621.714129] REGS: c0000000fffbfd70 TRAP: 0200 Tainted: G M (5.2.0-rc5-00239-g241e39004581)
[ 7621.714131] MSR: 9000000002209033 <SF,HV,VEC,EE,ME,IR,DR,RI,LE> CR: 24428840 XER: 00040000
[ 7621.714160] CFAR: c0000000000889a8 DAR: deadbeefdeadbeef DSISR: 00008000 IRQMASK: 0
[ 7621.714171] GPR00: 000000000e000000 c0000000f0b8b1e0 c0000000012cf100 c0000000ed8e1100
[ 7621.714186] GPR04: c000020000001100 0000000000010000 0000000000000200 03fffffff1272000
[ 7621.714201] GPR08: 0000000080000000 0000000000000010 0000000000000020 0000000000000030
[ 7621.714216] GPR12: 0000000000000040 00007fffb8c6d390 0000000000000050 0000000000000060
[ 7621.714232] GPR16: 0000000000000070 0000000000000000 0000000000000001 c0000000f0b8b960
[ 7621.714247] GPR20: 0000000000000001 c0000000f0b8b940 0000000000000001 0000000000010000
[ 7621.714262] GPR24: c000000001382560 c00c0000003b6380 c00c0000003b6380 0000000000010000
[ 7621.714277] GPR28: 0000000000000000 0000000000010000 c000020000000000 0000000000010000
[ 7621.714294] NIP [c000000000088978] memcpy_power7+0x418/0x7e0
[ 7621.714298] LR [c0000000008e16f8] pmem_do_bvec+0xf8/0x430
... <snip> ...
```

After this patch series:

```
bash-4.4# mount -o dax /dev/pmem0 /mnt/pmem/
[25302.883978] Buffer I/O error on dev pmem0, logical block 0, async page read
[25303.020816] EXT4-fs (pmem0): DAX enabled. Warning: EXPERIMENTAL, use at your own risk
[25303.021236] EXT4-fs (pmem0): Can't read superblock on 2nd try
[25303.152515] EXT4-fs (pmem0): DAX enabled. Warning: EXPERIMENTAL, use at your own risk
[25303.284031] EXT4-fs (pmem0): DAX enabled. Warning: EXPERIMENTAL, use at your own risk
[25304.084100] UDF-fs: bad mount option "dax" or missing value
mount: /mnt/pmem: wrong fs type, bad option, bad superblock on /dev/pmem0, missing codepage or helper program, or other error.
```

MCE is injected on a pmem address using mambo. The last patch which adds a nop
is only for testing on mambo, where r13 is not restored upon hitting vector 200.

The memcpy code can be optimised by adding VMX optimizations and GAS macros can
be used to enable code reusablity, which I will send as another series.

---
Change-log:

v5:
* Don't use search_exception_tables since it searches for module exception tables
also [Nicholas]
* Fix commit message for patch 2 [Nicholas]

v4:
* Squash return remaining bytes patch to memcpy_mcsafe implemtation patch [christophe]
* Access ok should be checked for copy_to_user_mcsafe() [christophe]

v3:
* Drop patch which enables DR/IR for external modules
* Drop notifier call chain, we don't want to do that in real mode
* Return remaining bytes from memcpy_mcsafe correctly
* We no longer restore r13 for simulator tests, rather use a nop at
vector 0x200 [workaround for simulator; not to be merged]

v2:
* Don't set RI bit explicitly [mahesh]
* Re-ordered series to get r13 workaround as the last patch

---
Balbir Singh (2):
powerpc/mce: Fix MCE handling for huge pages
powerpc/memcpy: Add memcpy_mcsafe for pmem

Reza Arbab (1):
powerpc/mce: Make machine_check_ue_event() static

Santosh Sivaraj (3):
extable: Add function to search only kernel exception table
powerpc/mce: Handle UE event for memcpy_mcsafe
powerpc: add machine check safe copy_to_user

arch/powerpc/Kconfig | 1 +
arch/powerpc/include/asm/mce.h | 7 +-
arch/powerpc/include/asm/string.h | 2 +
arch/powerpc/include/asm/uaccess.h | 14 ++
arch/powerpc/kernel/mce.c | 16 +-
arch/powerpc/kernel/mce_power.c | 41 +++--
arch/powerpc/lib/Makefile | 2 +-
arch/powerpc/lib/memcpy_mcsafe_64.S | 239 +++++++++++++++++++++++++++
arch/powerpc/platforms/pseries/ras.c | 6 +-
include/linux/extable.h | 2 +
kernel/extable.c | 16 +-
11 files changed, 323 insertions(+), 23 deletions(-)
create mode 100644 arch/powerpc/lib/memcpy_mcsafe_64.S

--
2.20.1


2019-07-09 12:16:42

by Santosh Sivaraj

[permalink] [raw]
Subject: [v5 1/6] powerpc/mce: Make machine_check_ue_event() static

From: Reza Arbab <[email protected]>

The function doesn't get used outside this file, so make it static.

Signed-off-by: Reza Arbab <[email protected]>
Signed-off-by: Santosh Sivaraj <[email protected]>
Reviewed-by: Nicholas Piggin <[email protected]>
---
arch/powerpc/kernel/mce.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/powerpc/kernel/mce.c b/arch/powerpc/kernel/mce.c
index b18df633eae9..e78c4f18ea0a 100644
--- a/arch/powerpc/kernel/mce.c
+++ b/arch/powerpc/kernel/mce.c
@@ -33,7 +33,7 @@ static DEFINE_PER_CPU(struct machine_check_event[MAX_MC_EVT],
mce_ue_event_queue);

static void machine_check_process_queued_event(struct irq_work *work);
-void machine_check_ue_event(struct machine_check_event *evt);
+static void machine_check_ue_event(struct machine_check_event *evt);
static void machine_process_ue_event(struct work_struct *work);

static struct irq_work mce_event_process_work = {
@@ -203,7 +203,7 @@ void release_mce_event(void)
/*
* Queue up the MCE event which then can be handled later.
*/
-void machine_check_ue_event(struct machine_check_event *evt)
+static void machine_check_ue_event(struct machine_check_event *evt)
{
int index;

--
2.20.1

2019-07-09 12:16:50

by Santosh Sivaraj

[permalink] [raw]
Subject: [v5 2/6] powerpc/mce: Fix MCE handling for huge pages

From: Balbir Singh <[email protected]>

The current code would fail on huge pages addresses, since the shift
would be incorrect. Use the correct page shift value returned by
__find_linux_pte() to get the correct pfn. The code is more generic
and can handle both regular and compound pages.

Fixes: ba41e1e1ccb9 ("powerpc/mce: Hookup derror (load/store) UE errors")

Signed-off-by: Balbir Singh <[email protected]>
[[email protected]: Fixup pseries_do_memory_failure()]
Signed-off-by: Reza Arbab <[email protected]>
Signed-off-by: Santosh Sivaraj <[email protected]>
---
arch/powerpc/include/asm/mce.h | 3 ++-
arch/powerpc/kernel/mce_power.c | 26 ++++++++++++++++----------
arch/powerpc/platforms/pseries/ras.c | 6 ++++--
3 files changed, 22 insertions(+), 13 deletions(-)

diff --git a/arch/powerpc/include/asm/mce.h b/arch/powerpc/include/asm/mce.h
index a4c6a74ad2fb..94888a7025b3 100644
--- a/arch/powerpc/include/asm/mce.h
+++ b/arch/powerpc/include/asm/mce.h
@@ -209,7 +209,8 @@ extern void release_mce_event(void);
extern void machine_check_queue_event(void);
extern void machine_check_print_event_info(struct machine_check_event *evt,
bool user_mode, bool in_guest);
-unsigned long addr_to_pfn(struct pt_regs *regs, unsigned long addr);
+unsigned long addr_to_pfn(struct pt_regs *regs, unsigned long addr,
+ unsigned int *shift);
#ifdef CONFIG_PPC_BOOK3S_64
void flush_and_reload_slb(void);
#endif /* CONFIG_PPC_BOOK3S_64 */
diff --git a/arch/powerpc/kernel/mce_power.c b/arch/powerpc/kernel/mce_power.c
index e39536aad30d..04666c0b40a8 100644
--- a/arch/powerpc/kernel/mce_power.c
+++ b/arch/powerpc/kernel/mce_power.c
@@ -23,7 +23,8 @@
* Convert an address related to an mm to a PFN. NOTE: we are in real
* mode, we could potentially race with page table updates.
*/
-unsigned long addr_to_pfn(struct pt_regs *regs, unsigned long addr)
+unsigned long addr_to_pfn(struct pt_regs *regs, unsigned long addr,
+ unsigned int *shift)
{
pte_t *ptep;
unsigned long flags;
@@ -36,13 +37,15 @@ unsigned long addr_to_pfn(struct pt_regs *regs, unsigned long addr)

local_irq_save(flags);
if (mm == current->mm)
- ptep = find_current_mm_pte(mm->pgd, addr, NULL, NULL);
+ ptep = find_current_mm_pte(mm->pgd, addr, NULL, shift);
else
- ptep = find_init_mm_pte(addr, NULL);
+ ptep = find_init_mm_pte(addr, shift);
local_irq_restore(flags);
if (!ptep || pte_special(*ptep))
return ULONG_MAX;
- return pte_pfn(*ptep);
+ if (!*shift)
+ *shift = PAGE_SHIFT;
+ return (pte_val(*ptep) & PTE_RPN_MASK) >> *shift;
}

/* flush SLBs and reload */
@@ -358,15 +361,16 @@ static int mce_find_instr_ea_and_pfn(struct pt_regs *regs, uint64_t *addr,
unsigned long pfn, instr_addr;
struct instruction_op op;
struct pt_regs tmp = *regs;
+ unsigned int shift;

- pfn = addr_to_pfn(regs, regs->nip);
+ pfn = addr_to_pfn(regs, regs->nip, &shift);
if (pfn != ULONG_MAX) {
- instr_addr = (pfn << PAGE_SHIFT) + (regs->nip & ~PAGE_MASK);
+ instr_addr = (pfn << shift) + (regs->nip & ((1 << shift) - 1));
instr = *(unsigned int *)(instr_addr);
if (!analyse_instr(&op, &tmp, instr)) {
- pfn = addr_to_pfn(regs, op.ea);
+ pfn = addr_to_pfn(regs, op.ea, &shift);
*addr = op.ea;
- *phys_addr = (pfn << PAGE_SHIFT);
+ *phys_addr = (pfn << shift);
return 0;
}
/*
@@ -442,12 +446,14 @@ static int mce_handle_ierror(struct pt_regs *regs,
if (mce_err->sync_error &&
table[i].error_type == MCE_ERROR_TYPE_UE) {
unsigned long pfn;
+ unsigned int shift;

if (get_paca()->in_mce < MAX_MCE_DEPTH) {
- pfn = addr_to_pfn(regs, regs->nip);
+ pfn = addr_to_pfn(regs, regs->nip,
+ &shift);
if (pfn != ULONG_MAX) {
*phys_addr =
- (pfn << PAGE_SHIFT);
+ (pfn << shift);
}
}
}
diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
index f16fdd0f71f7..5e43283d3300 100644
--- a/arch/powerpc/platforms/pseries/ras.c
+++ b/arch/powerpc/platforms/pseries/ras.c
@@ -740,12 +740,14 @@ static void pseries_do_memory_failure(struct pt_regs *regs,
paddr = be64_to_cpu(mce_log->logical_address);
} else if (mce_log->sub_err_type & UE_EFFECTIVE_ADDR_PROVIDED) {
unsigned long pfn;
+ unsigned int shift;

pfn = addr_to_pfn(regs,
- be64_to_cpu(mce_log->effective_address));
+ be64_to_cpu(mce_log->effective_address),
+ &shift);
if (pfn == ULONG_MAX)
return;
- paddr = pfn << PAGE_SHIFT;
+ paddr = pfn << shift;
} else {
return;
}
--
2.20.1

2019-07-09 12:17:08

by Santosh Sivaraj

[permalink] [raw]
Subject: [v5 3/6] powerpc/memcpy: Add memcpy_mcsafe for pmem

From: Balbir Singh <[email protected]>

The pmem infrastructure uses memcpy_mcsafe in the pmem layer so as to
convert machine check exceptions into a return value on failure in case
a machine check exception is encountered during the memcpy. The return
value is the number of bytes remaining to be copied.

This patch largely borrows from the copyuser_power7 logic and does not add
the VMX optimizations, largely to keep the patch simple. If needed those
optimizations can be folded in.

Signed-off-by: Balbir Singh <[email protected]>
[[email protected]: Added symbol export]
[santosh: return remaining bytes instead of -EFAULT]
Signed-off-by: Santosh Sivaraj <[email protected]>
---
arch/powerpc/include/asm/string.h | 2 +
arch/powerpc/lib/Makefile | 2 +-
arch/powerpc/lib/memcpy_mcsafe_64.S | 239 ++++++++++++++++++++++++++++
3 files changed, 242 insertions(+), 1 deletion(-)
create mode 100644 arch/powerpc/lib/memcpy_mcsafe_64.S

diff --git a/arch/powerpc/include/asm/string.h b/arch/powerpc/include/asm/string.h
index 9bf6dffb4090..b72692702f35 100644
--- a/arch/powerpc/include/asm/string.h
+++ b/arch/powerpc/include/asm/string.h
@@ -53,7 +53,9 @@ void *__memmove(void *to, const void *from, __kernel_size_t n);
#ifndef CONFIG_KASAN
#define __HAVE_ARCH_MEMSET32
#define __HAVE_ARCH_MEMSET64
+#define __HAVE_ARCH_MEMCPY_MCSAFE

+extern int memcpy_mcsafe(void *dst, const void *src, __kernel_size_t sz);
extern void *__memset16(uint16_t *, uint16_t v, __kernel_size_t);
extern void *__memset32(uint32_t *, uint32_t v, __kernel_size_t);
extern void *__memset64(uint64_t *, uint64_t v, __kernel_size_t);
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index c55f9c27bf79..529d6536eb4a 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -39,7 +39,7 @@ obj-$(CONFIG_PPC_BOOK3S_64) += copyuser_power7.o copypage_power7.o \
memcpy_power7.o

obj64-y += copypage_64.o copyuser_64.o mem_64.o hweight_64.o \
- memcpy_64.o pmem.o
+ memcpy_64.o pmem.o memcpy_mcsafe_64.o

obj64-$(CONFIG_SMP) += locks.o
obj64-$(CONFIG_ALTIVEC) += vmx-helper.o
diff --git a/arch/powerpc/lib/memcpy_mcsafe_64.S b/arch/powerpc/lib/memcpy_mcsafe_64.S
new file mode 100644
index 000000000000..4d8a3d315992
--- /dev/null
+++ b/arch/powerpc/lib/memcpy_mcsafe_64.S
@@ -0,0 +1,239 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) IBM Corporation, 2011
+ * Derived from copyuser_power7.s by Anton Blanchard <[email protected]>
+ * Author - Balbir Singh <[email protected]>
+ */
+#include <asm/ppc_asm.h>
+#include <asm/errno.h>
+#include <asm/export.h>
+
+ .macro err1
+100:
+ EX_TABLE(100b,.Ldo_err1)
+ .endm
+
+ .macro err2
+200:
+ EX_TABLE(200b,.Ldo_err2)
+ .endm
+
+.Ldo_err2:
+ ld r22,STK_REG(R22)(r1)
+ ld r21,STK_REG(R21)(r1)
+ ld r20,STK_REG(R20)(r1)
+ ld r19,STK_REG(R19)(r1)
+ ld r18,STK_REG(R18)(r1)
+ ld r17,STK_REG(R17)(r1)
+ ld r16,STK_REG(R16)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r14,STK_REG(R14)(r1)
+ addi r1,r1,STACKFRAMESIZE
+.Ldo_err1:
+ /* Do a byte by byte copy to get the exact remaining size */
+ mtctr r7
+100: EX_TABLE(100b, .Ldone)
+46:
+err1; lbz r0,0(r4)
+ addi r4,r4,1
+err1; stb r0,0(r3)
+ addi r3,r3,1
+ bdnz 46b
+ li r3,0
+ blr
+
+.Ldone:
+ mfctr r3
+ blr
+
+
+_GLOBAL(memcpy_mcsafe)
+ mr r7,r5
+ cmpldi r5,16
+ blt .Lshort_copy
+
+.Lcopy:
+ /* Get the source 8B aligned */
+ neg r6,r4
+ mtocrf 0x01,r6
+ clrldi r6,r6,(64-3)
+
+ bf cr7*4+3,1f
+err1; lbz r0,0(r4)
+ addi r4,r4,1
+err1; stb r0,0(r3)
+ addi r3,r3,1
+ subi r7,r7,1
+
+1: bf cr7*4+2,2f
+err1; lhz r0,0(r4)
+ addi r4,r4,2
+err1; sth r0,0(r3)
+ addi r3,r3,2
+ subi r7,r7,2
+
+2: bf cr7*4+1,3f
+err1; lwz r0,0(r4)
+ addi r4,r4,4
+err1; stw r0,0(r3)
+ addi r3,r3,4
+ subi r7,r7,4
+
+3: sub r5,r5,r6
+ cmpldi r5,128
+ blt 5f
+
+ mflr r0
+ stdu r1,-STACKFRAMESIZE(r1)
+ std r14,STK_REG(R14)(r1)
+ std r15,STK_REG(R15)(r1)
+ std r16,STK_REG(R16)(r1)
+ std r17,STK_REG(R17)(r1)
+ std r18,STK_REG(R18)(r1)
+ std r19,STK_REG(R19)(r1)
+ std r20,STK_REG(R20)(r1)
+ std r21,STK_REG(R21)(r1)
+ std r22,STK_REG(R22)(r1)
+ std r0,STACKFRAMESIZE+16(r1)
+
+ srdi r6,r5,7
+ mtctr r6
+
+ /* Now do cacheline (128B) sized loads and stores. */
+ .align 5
+4:
+err2; ld r0,0(r4)
+err2; ld r6,8(r4)
+err2; ld r8,16(r4)
+err2; ld r9,24(r4)
+err2; ld r10,32(r4)
+err2; ld r11,40(r4)
+err2; ld r12,48(r4)
+err2; ld r14,56(r4)
+err2; ld r15,64(r4)
+err2; ld r16,72(r4)
+err2; ld r17,80(r4)
+err2; ld r18,88(r4)
+err2; ld r19,96(r4)
+err2; ld r20,104(r4)
+err2; ld r21,112(r4)
+err2; ld r22,120(r4)
+ addi r4,r4,128
+err2; std r0,0(r3)
+err2; std r6,8(r3)
+err2; std r8,16(r3)
+err2; std r9,24(r3)
+err2; std r10,32(r3)
+err2; std r11,40(r3)
+err2; std r12,48(r3)
+err2; std r14,56(r3)
+err2; std r15,64(r3)
+err2; std r16,72(r3)
+err2; std r17,80(r3)
+err2; std r18,88(r3)
+err2; std r19,96(r3)
+err2; std r20,104(r3)
+err2; std r21,112(r3)
+err2; std r22,120(r3)
+ addi r3,r3,128
+ subi r7,r7,128
+ bdnz 4b
+
+ clrldi r5,r5,(64-7)
+
+ /* Up to 127B to go */
+5: srdi r6,r5,4
+ mtocrf 0x01,r6
+
+6: bf cr7*4+1,7f
+err2; ld r0,0(r4)
+err2; ld r6,8(r4)
+err2; ld r8,16(r4)
+err2; ld r9,24(r4)
+err2; ld r10,32(r4)
+err2; ld r11,40(r4)
+err2; ld r12,48(r4)
+err2; ld r14,56(r4)
+ addi r4,r4,64
+err2; std r0,0(r3)
+err2; std r6,8(r3)
+err2; std r8,16(r3)
+err2; std r9,24(r3)
+err2; std r10,32(r3)
+err2; std r11,40(r3)
+err2; std r12,48(r3)
+err2; std r14,56(r3)
+ addi r3,r3,64
+ subi r7,r7,64
+
+7: ld r14,STK_REG(R14)(r1)
+ ld r15,STK_REG(R15)(r1)
+ ld r16,STK_REG(R16)(r1)
+ ld r17,STK_REG(R17)(r1)
+ ld r18,STK_REG(R18)(r1)
+ ld r19,STK_REG(R19)(r1)
+ ld r20,STK_REG(R20)(r1)
+ ld r21,STK_REG(R21)(r1)
+ ld r22,STK_REG(R22)(r1)
+ addi r1,r1,STACKFRAMESIZE
+
+ /* Up to 63B to go */
+ bf cr7*4+2,8f
+err1; ld r0,0(r4)
+err1; ld r6,8(r4)
+err1; ld r8,16(r4)
+err1; ld r9,24(r4)
+ addi r4,r4,32
+err1; std r0,0(r3)
+err1; std r6,8(r3)
+err1; std r8,16(r3)
+err1; std r9,24(r3)
+ addi r3,r3,32
+ subi r7,r7,32
+
+ /* Up to 31B to go */
+8: bf cr7*4+3,9f
+err1; ld r0,0(r4)
+err1; ld r6,8(r4)
+ addi r4,r4,16
+err1; std r0,0(r3)
+err1; std r6,8(r3)
+ addi r3,r3,16
+ subi r7,r7,16
+
+9: clrldi r5,r5,(64-4)
+
+ /* Up to 15B to go */
+.Lshort_copy:
+ mtocrf 0x01,r5
+ bf cr7*4+0,12f
+err1; lwz r0,0(r4) /* Less chance of a reject with word ops */
+err1; lwz r6,4(r4)
+ addi r4,r4,8
+err1; stw r0,0(r3)
+err1; stw r6,4(r3)
+ addi r3,r3,8
+ subi r7,r7,8
+
+12: bf cr7*4+1,13f
+err1; lwz r0,0(r4)
+ addi r4,r4,4
+err1; stw r0,0(r3)
+ addi r3,r3,4
+ subi r7,r7,4
+
+13: bf cr7*4+2,14f
+err1; lhz r0,0(r4)
+ addi r4,r4,2
+err1; sth r0,0(r3)
+ addi r3,r3,2
+ subi r7,r7,2
+
+14: bf cr7*4+3,15f
+err1; lbz r0,0(r4)
+err1; stb r0,0(r3)
+
+15: li r3,0
+ blr
+
+EXPORT_SYMBOL_GPL(memcpy_mcsafe);
--
2.20.1

2019-07-09 12:17:43

by Santosh Sivaraj

[permalink] [raw]
Subject: [v5 5/6] powerpc/mce: Handle UE event for memcpy_mcsafe

If we take a UE on one of the instructions with a fixup entry, set nip
to continue execution at the fixup entry. Stop processing the event
further or print it.

Based-on-patch-by: Reza Arbab <[email protected]>
Cc: Reza Arbab <[email protected]>
Cc: Mahesh Salgaonkar <[email protected]>
Signed-off-by: Santosh Sivaraj <[email protected]>
---
arch/powerpc/include/asm/mce.h | 4 +++-
arch/powerpc/kernel/mce.c | 12 +++++++++++-
arch/powerpc/kernel/mce_power.c | 15 +++++++++++++--
3 files changed, 27 insertions(+), 4 deletions(-)

Nick, I didn't add has_fixup_handler in mce_event structure; if we do so we wil
have to access the mce_event from ue_handler code also. That is because Mahesh
did not want mce_event to be accessed outside of save_mce_event, get_mce_event
and remove_mce_event; that is why I added ignore_event in mce_err also.

I have added the comment you mentioned in your reply.

diff --git a/arch/powerpc/include/asm/mce.h b/arch/powerpc/include/asm/mce.h
index 94888a7025b3..f74257eb013b 100644
--- a/arch/powerpc/include/asm/mce.h
+++ b/arch/powerpc/include/asm/mce.h
@@ -122,7 +122,8 @@ struct machine_check_event {
enum MCE_UeErrorType ue_error_type:8;
u8 effective_address_provided;
u8 physical_address_provided;
- u8 reserved_1[5];
+ u8 ignore_event;
+ u8 reserved_1[4];
u64 effective_address;
u64 physical_address;
u8 reserved_2[8];
@@ -193,6 +194,7 @@ struct mce_error_info {
enum MCE_Initiator initiator:8;
enum MCE_ErrorClass error_class:8;
bool sync_error;
+ bool ignore_event;
};

#define MAX_MC_EVT 100
diff --git a/arch/powerpc/kernel/mce.c b/arch/powerpc/kernel/mce.c
index e78c4f18ea0a..092e6bbc603f 100644
--- a/arch/powerpc/kernel/mce.c
+++ b/arch/powerpc/kernel/mce.c
@@ -144,7 +144,9 @@ void save_mce_event(struct pt_regs *regs, long handled,
if (phys_addr != ULONG_MAX) {
mce->u.ue_error.physical_address_provided = true;
mce->u.ue_error.physical_address = phys_addr;
- machine_check_ue_event(mce);
+ mce->u.ue_error.ignore_event = mce_err->ignore_event;
+ if (!mce->u.ue_error.ignore_event)
+ machine_check_ue_event(mce);
}
}
return;
@@ -230,6 +232,14 @@ void machine_check_queue_event(void)
if (!get_mce_event(&evt, MCE_EVENT_RELEASE))
return;

+ /*
+ * Don't report this machine check because the caller has a asked us
+ * to ignore the event, it has a fixup handler which will do the
+ * appropriate error handling and reporting.
+ */
+ if (evt.error_type == MCE_ERROR_TYPE_UE && evt.u.ue_error.ignore_event)
+ return;
+
index = __this_cpu_inc_return(mce_queue_count) - 1;
/* If queue is full, just return for now. */
if (index >= MAX_MC_EVT) {
diff --git a/arch/powerpc/kernel/mce_power.c b/arch/powerpc/kernel/mce_power.c
index 04666c0b40a8..582a22b1acfb 100644
--- a/arch/powerpc/kernel/mce_power.c
+++ b/arch/powerpc/kernel/mce_power.c
@@ -11,6 +11,7 @@

#include <linux/types.h>
#include <linux/ptrace.h>
+#include <linux/extable.h>
#include <asm/mmu.h>
#include <asm/mce.h>
#include <asm/machdep.h>
@@ -18,6 +19,7 @@
#include <asm/pte-walk.h>
#include <asm/sstep.h>
#include <asm/exception-64s.h>
+#include <asm/extable.h>

/*
* Convert an address related to an mm to a PFN. NOTE: we are in real
@@ -565,9 +567,18 @@ static int mce_handle_derror(struct pt_regs *regs,
return 0;
}

-static long mce_handle_ue_error(struct pt_regs *regs)
+static long mce_handle_ue_error(struct pt_regs *regs,
+ struct mce_error_info *mce_err)
{
long handled = 0;
+ const struct exception_table_entry *entry;
+
+ entry = search_kernel_exception_table(regs->nip);
+ if (entry) {
+ mce_err->ignore_event = true;
+ regs->nip = extable_fixup(entry);
+ return 1;
+ }

/*
* On specific SCOM read via MMIO we may get a machine check
@@ -600,7 +611,7 @@ static long mce_handle_error(struct pt_regs *regs,
&phys_addr);

if (!handled && mce_err.error_type == MCE_ERROR_TYPE_UE)
- handled = mce_handle_ue_error(regs);
+ handled = mce_handle_ue_error(regs, &mce_err);

save_mce_event(regs, handled, &mce_err, regs->nip, addr, phys_addr);

--
2.20.1

2019-07-09 12:17:49

by Santosh Sivaraj

[permalink] [raw]
Subject: [v5 6/6] powerpc: add machine check safe copy_to_user

Use memcpy_mcsafe() implementation to define copy_to_user_mcsafe()

Signed-off-by: Santosh Sivaraj <[email protected]>
---
arch/powerpc/Kconfig | 1 +
arch/powerpc/include/asm/uaccess.h | 14 ++++++++++++++
2 files changed, 15 insertions(+)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 8c1c636308c8..a173b392c272 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -134,6 +134,7 @@ config PPC
select ARCH_HAS_STRICT_KERNEL_RWX if ((PPC_BOOK3S_64 || PPC32) && !RELOCATABLE && !HIBERNATION)
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select ARCH_HAS_UACCESS_FLUSHCACHE if PPC64
+ select ARCH_HAS_UACCESS_MCSAFE if PPC64
select ARCH_HAS_UBSAN_SANITIZE_ALL
select ARCH_HAS_ZONE_DEVICE if PPC_BOOK3S_64
select ARCH_HAVE_NMI_SAFE_CMPXCHG
diff --git a/arch/powerpc/include/asm/uaccess.h b/arch/powerpc/include/asm/uaccess.h
index 76f34346b642..8899864a5552 100644
--- a/arch/powerpc/include/asm/uaccess.h
+++ b/arch/powerpc/include/asm/uaccess.h
@@ -386,6 +386,20 @@ static inline unsigned long raw_copy_to_user(void __user *to,
return ret;
}

+static __always_inline unsigned long __must_check
+copy_to_user_mcsafe(void __user *to, const void *from, unsigned long n)
+{
+ if (likely(check_copy_size(from, n, true))) {
+ if (access_ok(to, n)) {
+ allow_write_to_user(to, n);
+ n = memcpy_mcsafe((void *)to, from, n);
+ prevent_write_to_user(to, n);
+ }
+ }
+
+ return n;
+}
+
extern unsigned long __clear_user(void __user *addr, unsigned long size);

static inline unsigned long clear_user(void __user *addr, unsigned long size)
--
2.20.1

2019-07-09 12:18:38

by Santosh Sivaraj

[permalink] [raw]
Subject: [v5 4/6] extable: Add function to search only kernel exception table

In real mode, the search_exception tables cannot be called because
it also searches the module exception tables if entry is not found
in the kernel exception tables.

Cc: Thomas Gleixner <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Nicholas Piggin <[email protected]>
Signed-off-by: Santosh Sivaraj <[email protected]>
---
include/linux/extable.h | 2 ++
kernel/extable.c | 16 +++++++++++++---
2 files changed, 15 insertions(+), 3 deletions(-)

diff --git a/include/linux/extable.h b/include/linux/extable.h
index 41c5b3a25f67..0c2819ba67f0 100644
--- a/include/linux/extable.h
+++ b/include/linux/extable.h
@@ -19,6 +19,8 @@ void trim_init_extable(struct module *m);

/* Given an address, look for it in the exception tables */
const struct exception_table_entry *search_exception_tables(unsigned long add);
+const struct
+exception_table_entry *search_kernel_exception_table(unsigned long addr);

#ifdef CONFIG_MODULES
/* For extable.c to search modules' exception tables. */
diff --git a/kernel/extable.c b/kernel/extable.c
index e23cce6e6092..6d544cb79fff 100644
--- a/kernel/extable.c
+++ b/kernel/extable.c
@@ -40,13 +40,23 @@ void __init sort_main_extable(void)
}
}

-/* Given an address, look for it in the exception tables. */
+/* For the given address, look for it in the kernel exception table */
+const
+struct exception_table_entry *search_kernel_exception_table(unsigned long addr)
+{
+ return search_extable(__start___ex_table,
+ __stop___ex_table - __start___ex_table, addr);
+}
+
+/*
+ * Given an address, look for it in the kernel and the module exception
+ * tables.
+ */
const struct exception_table_entry *search_exception_tables(unsigned long addr)
{
const struct exception_table_entry *e;

- e = search_extable(__start___ex_table,
- __stop___ex_table - __start___ex_table, addr);
+ e = search_kernel_exception_table(addr);
if (!e)
e = search_module_extables(addr);
return e;
--
2.20.1

2019-07-11 09:42:26

by Nicholas Piggin

[permalink] [raw]
Subject: Re: [v5 2/6] powerpc/mce: Fix MCE handling for huge pages

Santosh Sivaraj's on July 9, 2019 10:15 pm:
> From: Balbir Singh <[email protected]>
>
> The current code would fail on huge pages addresses, since the shift
> would be incorrect. Use the correct page shift value returned by
> __find_linux_pte() to get the correct pfn. The code is more generic
> and can handle both regular and compound pages.
>
> Fixes: ba41e1e1ccb9 ("powerpc/mce: Hookup derror (load/store) UE errors")
>
> Signed-off-by: Balbir Singh <[email protected]>
> [[email protected]: Fixup pseries_do_memory_failure()]
> Signed-off-by: Reza Arbab <[email protected]>
> Signed-off-by: Santosh Sivaraj <[email protected]>
> ---
> arch/powerpc/include/asm/mce.h | 3 ++-
> arch/powerpc/kernel/mce_power.c | 26 ++++++++++++++++----------
> arch/powerpc/platforms/pseries/ras.c | 6 ++++--
> 3 files changed, 22 insertions(+), 13 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/mce.h b/arch/powerpc/include/asm/mce.h
> index a4c6a74ad2fb..94888a7025b3 100644
> --- a/arch/powerpc/include/asm/mce.h
> +++ b/arch/powerpc/include/asm/mce.h
> @@ -209,7 +209,8 @@ extern void release_mce_event(void);
> extern void machine_check_queue_event(void);
> extern void machine_check_print_event_info(struct machine_check_event *evt,
> bool user_mode, bool in_guest);
> -unsigned long addr_to_pfn(struct pt_regs *regs, unsigned long addr);
> +unsigned long addr_to_pfn(struct pt_regs *regs, unsigned long addr,
> + unsigned int *shift);
> #ifdef CONFIG_PPC_BOOK3S_64
> void flush_and_reload_slb(void);
> #endif /* CONFIG_PPC_BOOK3S_64 */
> diff --git a/arch/powerpc/kernel/mce_power.c b/arch/powerpc/kernel/mce_power.c
> index e39536aad30d..04666c0b40a8 100644
> --- a/arch/powerpc/kernel/mce_power.c
> +++ b/arch/powerpc/kernel/mce_power.c
> @@ -23,7 +23,8 @@
> * Convert an address related to an mm to a PFN. NOTE: we are in real
> * mode, we could potentially race with page table updates.
> */
> -unsigned long addr_to_pfn(struct pt_regs *regs, unsigned long addr)
> +unsigned long addr_to_pfn(struct pt_regs *regs, unsigned long addr,
> + unsigned int *shift)
> {
> pte_t *ptep;
> unsigned long flags;
> @@ -36,13 +37,15 @@ unsigned long addr_to_pfn(struct pt_regs *regs, unsigned long addr)
>
> local_irq_save(flags);
> if (mm == current->mm)
> - ptep = find_current_mm_pte(mm->pgd, addr, NULL, NULL);
> + ptep = find_current_mm_pte(mm->pgd, addr, NULL, shift);
> else
> - ptep = find_init_mm_pte(addr, NULL);
> + ptep = find_init_mm_pte(addr, shift);
> local_irq_restore(flags);
> if (!ptep || pte_special(*ptep))
> return ULONG_MAX;
> - return pte_pfn(*ptep);
> + if (!*shift)
> + *shift = PAGE_SHIFT;
> + return (pte_val(*ptep) & PTE_RPN_MASK) >> *shift;
> }
>
> /* flush SLBs and reload */

Ah, the comment I made earlier to this patch I think missed some detail.

But what we should do here is return the pfn (which is always units
of PAGE_SIZE). So you have to adjust by the lower part of the address
here, rather than returning shift which is unnecessary.

Possibly even better is to just return the real address, which is
what all callers seem to want anyway.

> @@ -358,15 +361,16 @@ static int mce_find_instr_ea_and_pfn(struct pt_regs *regs, uint64_t *addr,
> unsigned long pfn, instr_addr;
> struct instruction_op op;
> struct pt_regs tmp = *regs;
> + unsigned int shift;
>
> - pfn = addr_to_pfn(regs, regs->nip);
> + pfn = addr_to_pfn(regs, regs->nip, &shift);
> if (pfn != ULONG_MAX) {
> - instr_addr = (pfn << PAGE_SHIFT) + (regs->nip & ~PAGE_MASK);
> + instr_addr = (pfn << shift) + (regs->nip & ((1 << shift) - 1));

This wants the exact real address.

> instr = *(unsigned int *)(instr_addr);
> if (!analyse_instr(&op, &tmp, instr)) {
> - pfn = addr_to_pfn(regs, op.ea);
> + pfn = addr_to_pfn(regs, op.ea, &shift);
> *addr = op.ea;
> - *phys_addr = (pfn << PAGE_SHIFT);
> + *phys_addr = (pfn << shift);
> return 0;
> }

I'm not sure this is really what we want. You do really want the
PAGE_SIZE pfn here. Say you have a failure in the nth small page
of a large page mapping, this gives the physical address of the
start of the large page, so memory failure will fail out the 0th
small page won't it?

> /*
> @@ -442,12 +446,14 @@ static int mce_handle_ierror(struct pt_regs *regs,
> if (mce_err->sync_error &&
> table[i].error_type == MCE_ERROR_TYPE_UE) {
> unsigned long pfn;
> + unsigned int shift;
>
> if (get_paca()->in_mce < MAX_MCE_DEPTH) {
> - pfn = addr_to_pfn(regs, regs->nip);
> + pfn = addr_to_pfn(regs, regs->nip,
> + &shift);
> if (pfn != ULONG_MAX) {
> *phys_addr =
> - (pfn << PAGE_SHIFT);
> + (pfn << shift);
> }
> }
> }
> diff --git a/arch/powerpc/platforms/pseries/ras.c b/arch/powerpc/platforms/pseries/ras.c
> index f16fdd0f71f7..5e43283d3300 100644
> --- a/arch/powerpc/platforms/pseries/ras.c
> +++ b/arch/powerpc/platforms/pseries/ras.c
> @@ -740,12 +740,14 @@ static void pseries_do_memory_failure(struct pt_regs *regs,
> paddr = be64_to_cpu(mce_log->logical_address);
> } else if (mce_log->sub_err_type & UE_EFFECTIVE_ADDR_PROVIDED) {
> unsigned long pfn;
> + unsigned int shift;
>
> pfn = addr_to_pfn(regs,
> - be64_to_cpu(mce_log->effective_address));
> + be64_to_cpu(mce_log->effective_address),
> + &shift);
> if (pfn == ULONG_MAX)
> return;
> - paddr = pfn << PAGE_SHIFT;
> + paddr = pfn << shift;
> } else {
> return;
> }

Same for all these.

Thanks,
Nick

2019-07-11 09:52:06

by Nicholas Piggin

[permalink] [raw]
Subject: Re: [v5 4/6] extable: Add function to search only kernel exception table

Santosh Sivaraj's on July 9, 2019 10:15 pm:
> In real mode, the search_exception tables cannot be called because
> it also searches the module exception tables if entry is not found
> in the kernel exception tables.

This is a patch for generic kernel code, it may not go through
powerpc tree and someone doing git blame or something won't have
any idea what this changelog means.

Can you re-word this and just say something like, "certain architecture
$specific operating modes (e.g., in powerpc machine check handler that
is unable to access vmalloc memory)."

>
> Cc: Thomas Gleixner <[email protected]>
> Cc: Ingo Molnar <[email protected]>
> Cc: Nicholas Piggin <[email protected]>
> Signed-off-by: Santosh Sivaraj <[email protected]>
> ---
> include/linux/extable.h | 2 ++
> kernel/extable.c | 16 +++++++++++++---
> 2 files changed, 15 insertions(+), 3 deletions(-)
>
> diff --git a/include/linux/extable.h b/include/linux/extable.h
> index 41c5b3a25f67..0c2819ba67f0 100644
> --- a/include/linux/extable.h
> +++ b/include/linux/extable.h
> @@ -19,6 +19,8 @@ void trim_init_extable(struct module *m);
>
> /* Given an address, look for it in the exception tables */
> const struct exception_table_entry *search_exception_tables(unsigned long add);
> +const struct
> +exception_table_entry *search_kernel_exception_table(unsigned long addr);
>
> #ifdef CONFIG_MODULES
> /* For extable.c to search modules' exception tables. */
> diff --git a/kernel/extable.c b/kernel/extable.c
> index e23cce6e6092..6d544cb79fff 100644
> --- a/kernel/extable.c
> +++ b/kernel/extable.c
> @@ -40,13 +40,23 @@ void __init sort_main_extable(void)
> }
> }
>
> -/* Given an address, look for it in the exception tables. */
> +/* For the given address, look for it in the kernel exception table */

Nitpick, no reason to vary the structure of the comment.

Code wise it looks fine, so with the comments and changelog fixed,

Reviewed-by: Nicholas Piggin <[email protected]>

> +const
> +struct exception_table_entry *search_kernel_exception_table(unsigned long addr)
> +{
> + return search_extable(__start___ex_table,
> + __stop___ex_table - __start___ex_table, addr);
> +}
> +
> +/*
> + * Given an address, look for it in the kernel and the module exception
> + * tables.
> + */
> const struct exception_table_entry *search_exception_tables(unsigned long addr)
> {
> const struct exception_table_entry *e;
>
> - e = search_extable(__start___ex_table,
> - __stop___ex_table - __start___ex_table, addr);
> + e = search_kernel_exception_table(addr);
> if (!e)
> e = search_module_extables(addr);
> return e;
> --
> 2.20.1
>
>

2019-07-11 09:54:45

by Nicholas Piggin

[permalink] [raw]
Subject: Re: [v5 3/6] powerpc/memcpy: Add memcpy_mcsafe for pmem

Santosh Sivaraj's on July 9, 2019 10:15 pm:
> From: Balbir Singh <[email protected]>
>
> The pmem infrastructure uses memcpy_mcsafe in the pmem layer so as to
> convert machine check exceptions into a return value on failure in case
> a machine check exception is encountered during the memcpy. The return
> value is the number of bytes remaining to be copied.
>
> This patch largely borrows from the copyuser_power7 logic and does not add
> the VMX optimizations, largely to keep the patch simple. If needed those
> optimizations can be folded in.

Shouldn't this patch go after the exception table stuff now if you
squashed them together?

Thanks,
Nick

2019-07-11 09:57:11

by Nicholas Piggin

[permalink] [raw]
Subject: Re: [v5 5/6] powerpc/mce: Handle UE event for memcpy_mcsafe

Santosh Sivaraj's on July 9, 2019 10:15 pm:
> If we take a UE on one of the instructions with a fixup entry, set nip
> to continue execution at the fixup entry. Stop processing the event
> further or print it.

So... what happens if we take a machine check while we happen to be
executing some other kernel operation with a fixup entry?

Or the other way around, what happens if memcpy_mcsafe takes a page
fault for some reason (e.g., kernel bug it tries to access unmapped
memory).

Thanks,
Nick