This adds the plumbing for reading panel rotation from the devicetree
and sets up adding a panel property for the panel orientation on
Mediatek SoCs when a rotation is present.
v7 changes:
-forgot to add static inline
v6 changes:
-added enum declaration to drm_panel.h header
v5 changes:
-rebased
v4 changes:
-fixed some changes made to the i915 driver
-clarified comments on of orientation helper
v3 changes:
-changed from attach/detach callbacks to directly setting fixed panel
values in drm_panel_attach
-removed update to Documentation
-added separate function for quirked panel orientation property init
v2 changes:
fixed build errors in i915
Derek Basehore (4):
drm/panel: Add helper for reading DT rotation
drm/panel: set display info in panel attach
drm/connector: Split out orientation quirk detection
drm/mtk: add panel orientation property
drivers/gpu/drm/drm_connector.c | 45 ++++++++++++++-----
drivers/gpu/drm/drm_panel.c | 70 ++++++++++++++++++++++++++++++
drivers/gpu/drm/i915/intel_dp.c | 4 +-
drivers/gpu/drm/i915/vlv_dsi.c | 5 +--
drivers/gpu/drm/mediatek/mtk_dsi.c | 8 ++++
include/drm/drm_connector.h | 2 +
include/drm/drm_panel.h | 21 +++++++++
7 files changed, 138 insertions(+), 17 deletions(-)
--
2.22.0.410.gd8fdbe21b5-goog
This adds a helper function for reading the rotation (panel
orientation) from the device tree.
Signed-off-by: Derek Basehore <[email protected]>
---
drivers/gpu/drm/drm_panel.c | 43 +++++++++++++++++++++++++++++++++++++
include/drm/drm_panel.h | 9 ++++++++
2 files changed, 52 insertions(+)
diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
index dbd5b873e8f2..169bab54d52d 100644
--- a/drivers/gpu/drm/drm_panel.c
+++ b/drivers/gpu/drm/drm_panel.c
@@ -172,6 +172,49 @@ struct drm_panel *of_drm_find_panel(const struct device_node *np)
return ERR_PTR(-EPROBE_DEFER);
}
EXPORT_SYMBOL(of_drm_find_panel);
+
+/**
+ * of_drm_get_panel_orientation - look up the orientation of the panel through
+ * the "rotation" binding from a device tree node
+ * @np: device tree node of the panel
+ * @orientation: orientation enum to be filled in
+ *
+ * Looks up the rotation of a panel in the device tree. The orientation of the
+ * panel is expressed as a property name "rotation" in the device tree. The
+ * rotation in the device tree is counter clockwise.
+ *
+ * Return: 0 when a valid rotation value (0, 90, 180, or 270) is read or the
+ * rotation property doesn't exist. -EERROR otherwise.
+ */
+int of_drm_get_panel_orientation(const struct device_node *np,
+ enum drm_panel_orientation *orientation)
+{
+ int rotation, ret;
+
+ ret = of_property_read_u32(np, "rotation", &rotation);
+ if (ret == -EINVAL) {
+ /* Don't return an error if there's no rotation property. */
+ *orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+ return 0;
+ }
+
+ if (ret < 0)
+ return ret;
+
+ if (rotation == 0)
+ *orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL;
+ else if (rotation == 90)
+ *orientation = DRM_MODE_PANEL_ORIENTATION_RIGHT_UP;
+ else if (rotation == 180)
+ *orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP;
+ else if (rotation == 270)
+ *orientation = DRM_MODE_PANEL_ORIENTATION_LEFT_UP;
+ else
+ return -EINVAL;
+
+ return 0;
+}
+EXPORT_SYMBOL(of_drm_get_panel_orientation);
#endif
MODULE_AUTHOR("Thierry Reding <[email protected]>");
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index 8c738c0e6e9f..fc7da55f41d9 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -33,6 +33,8 @@ struct drm_device;
struct drm_panel;
struct display_timing;
+enum drm_panel_orientation;
+
/**
* struct drm_panel_funcs - perform operations on a given panel
* @disable: disable panel (turn off back light, etc.)
@@ -197,11 +199,18 @@ int drm_panel_detach(struct drm_panel *panel);
#if defined(CONFIG_OF) && defined(CONFIG_DRM_PANEL)
struct drm_panel *of_drm_find_panel(const struct device_node *np);
+int of_drm_get_panel_orientation(const struct device_node *np,
+ enum drm_panel_orientation *orientation);
#else
static inline struct drm_panel *of_drm_find_panel(const struct device_node *np)
{
return ERR_PTR(-ENODEV);
}
+static inline int of_drm_get_panel_orientation(const struct device_node *np,
+ enum drm_panel_orientation *orientation)
+{
+ return -ENODEV;
+}
#endif
#endif
--
2.22.0.410.gd8fdbe21b5-goog
Not every platform needs quirk detection for panel orientation, so
split the drm_connector_init_panel_orientation_property into two
functions. One for platforms without the need for quirks, and the
other for platforms that need quirks.
Signed-off-by: Derek Basehore <[email protected]>
---
drivers/gpu/drm/drm_connector.c | 45 ++++++++++++++++++-------
drivers/gpu/drm/i915/display/intel_dp.c | 4 +--
drivers/gpu/drm/i915/display/vlv_dsi.c | 2 +-
include/drm/drm_connector.h | 2 ++
4 files changed, 38 insertions(+), 15 deletions(-)
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c
index b3f2cf7eae9c..52777d647494 100644
--- a/drivers/gpu/drm/drm_connector.c
+++ b/drivers/gpu/drm/drm_connector.c
@@ -1892,31 +1892,23 @@ EXPORT_SYMBOL(drm_connector_set_vrr_capable_property);
* drm_connector_init_panel_orientation_property -
* initialize the connecters panel_orientation property
* @connector: connector for which to init the panel-orientation property.
- * @width: width in pixels of the panel, used for panel quirk detection
- * @height: height in pixels of the panel, used for panel quirk detection
*
* This function should only be called for built-in panels, after setting
* connector->display_info.panel_orientation first (if known).
*
- * This function will check for platform specific (e.g. DMI based) quirks
- * overriding display_info.panel_orientation first, then if panel_orientation
- * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
- * "panel orientation" property to the connector.
+ * This function will check if the panel_orientation is not
+ * DRM_MODE_PANEL_ORIENTATION_UNKNOWN. If not, it will attach the "panel
+ * orientation" property to the connector.
*
* Returns:
* Zero on success, negative errno on failure.
*/
int drm_connector_init_panel_orientation_property(
- struct drm_connector *connector, int width, int height)
+ struct drm_connector *connector)
{
struct drm_device *dev = connector->dev;
struct drm_display_info *info = &connector->display_info;
struct drm_property *prop;
- int orientation_quirk;
-
- orientation_quirk = drm_get_panel_orientation_quirk(width, height);
- if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
- info->panel_orientation = orientation_quirk;
if (info->panel_orientation == DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
return 0;
@@ -1939,6 +1931,35 @@ int drm_connector_init_panel_orientation_property(
}
EXPORT_SYMBOL(drm_connector_init_panel_orientation_property);
+/**
+ * drm_connector_init_panel_orientation_property_quirk -
+ * initialize the connecters panel_orientation property with a quirk
+ * override
+ * @connector: connector for which to init the panel-orientation property.
+ * @width: width in pixels of the panel, used for panel quirk detection
+ * @height: height in pixels of the panel, used for panel quirk detection
+ *
+ * This function will check for platform specific (e.g. DMI based) quirks
+ * overriding display_info.panel_orientation first, then if panel_orientation
+ * is not DRM_MODE_PANEL_ORIENTATION_UNKNOWN it will attach the
+ * "panel orientation" property to the connector.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_connector_init_panel_orientation_property_quirk(
+ struct drm_connector *connector, int width, int height)
+{
+ int orientation_quirk;
+
+ orientation_quirk = drm_get_panel_orientation_quirk(width, height);
+ if (orientation_quirk != DRM_MODE_PANEL_ORIENTATION_UNKNOWN)
+ connector->display_info.panel_orientation = orientation_quirk;
+
+ return drm_connector_init_panel_orientation_property(connector);
+}
+EXPORT_SYMBOL(drm_connector_init_panel_orientation_property_quirk);
+
int drm_connector_set_obj_prop(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t value)
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 0bdb7ecc5a81..975196c86e50 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -7063,8 +7063,8 @@ static bool intel_edp_init_connector(struct intel_dp *intel_dp,
intel_panel_setup_backlight(connector, pipe);
if (fixed_mode)
- drm_connector_init_panel_orientation_property(
- connector, fixed_mode->hdisplay, fixed_mode->vdisplay);
+ drm_connector_init_panel_orientation_property_quirk(connector,
+ fixed_mode->hdisplay, fixed_mode->vdisplay);
return true;
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index e272d826210a..dd7fa806f95c 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -1662,7 +1662,7 @@ static void intel_dsi_add_properties(struct intel_connector *connector)
connector->base.display_info.panel_orientation =
vlv_dsi_get_panel_orientation(connector);
- drm_connector_init_panel_orientation_property(
+ drm_connector_init_panel_orientation_property_quirk(
&connector->base,
connector->panel.fixed_mode->hdisplay,
connector->panel.fixed_mode->vdisplay);
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index ca745d9feaf5..940254b06767 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -1512,6 +1512,8 @@ void drm_connector_set_link_status_property(struct drm_connector *connector,
void drm_connector_set_vrr_capable_property(
struct drm_connector *connector, bool capable);
int drm_connector_init_panel_orientation_property(
+ struct drm_connector *connector);
+int drm_connector_init_panel_orientation_property_quirk(
struct drm_connector *connector, int width, int height);
int drm_connector_attach_max_bpc_property(struct drm_connector *connector,
int min, int max);
--
2.22.0.410.gd8fdbe21b5-goog
This inits the panel orientation property for the mediatek dsi driver
if the panel orientation (connector.display_info.panel_orientation) is
not DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
Signed-off-by: Derek Basehore <[email protected]>
---
drivers/gpu/drm/mediatek/mtk_dsi.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
index b91c4616644a..2920458ae2fb 100644
--- a/drivers/gpu/drm/mediatek/mtk_dsi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
@@ -790,10 +790,18 @@ static int mtk_dsi_create_connector(struct drm_device *drm, struct mtk_dsi *dsi)
DRM_ERROR("Failed to attach panel to drm\n");
goto err_connector_cleanup;
}
+
+ ret = drm_connector_init_panel_orientation_property(&dsi->conn);
+ if (ret) {
+ DRM_ERROR("Failed to init panel orientation\n");
+ goto err_panel_detach;
+ }
}
return 0;
+err_panel_detach:
+ drm_panel_detach(dsi->panel);
err_connector_cleanup:
drm_connector_cleanup(&dsi->conn);
return ret;
--
2.22.0.410.gd8fdbe21b5-goog
Devicetree systems can set panel orientation via a panel binding, but
there's no way, as is, to propagate this setting to the connector,
where the property need to be added.
To address this, this patch sets orientation, as well as other fixed
values for the panel, in the drm_panel_attach function. These values
are stored from probe in the drm_panel struct.
Signed-off-by: Derek Basehore <[email protected]>
---
drivers/gpu/drm/drm_panel.c | 28 ++++++++++++++++++++++++++++
include/drm/drm_panel.h | 14 ++++++++++++++
2 files changed, 42 insertions(+)
diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
index 169bab54d52d..ca01095470a9 100644
--- a/drivers/gpu/drm/drm_panel.c
+++ b/drivers/gpu/drm/drm_panel.c
@@ -104,11 +104,23 @@ EXPORT_SYMBOL(drm_panel_remove);
*/
int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector)
{
+ struct drm_display_info *info;
+
if (panel->connector)
return -EBUSY;
panel->connector = connector;
panel->drm = connector->dev;
+ info = &connector->display_info;
+ info->width_mm = panel->width_mm;
+ info->height_mm = panel->height_mm;
+ info->bpc = panel->bpc;
+ info->panel_orientation = panel->orientation;
+ info->bus_flags = panel->bus_flags;
+ if (panel->bus_formats)
+ drm_display_info_set_bus_formats(&connector->display_info,
+ panel->bus_formats,
+ panel->num_bus_formats);
return 0;
}
@@ -128,6 +140,22 @@ EXPORT_SYMBOL(drm_panel_attach);
*/
int drm_panel_detach(struct drm_panel *panel)
{
+ struct drm_display_info *info;
+
+ if (!panel->connector)
+ goto out;
+
+ info = &panel->connector->display_info;
+ info->width_mm = 0;
+ info->height_mm = 0;
+ info->bpc = 0;
+ info->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
+ info->bus_flags = 0;
+ kfree(info->bus_formats);
+ info->bus_formats = NULL;
+ info->num_bus_formats = 0;
+
+out:
panel->connector = NULL;
panel->drm = NULL;
diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
index fc7da55f41d9..a6a881b987dd 100644
--- a/include/drm/drm_panel.h
+++ b/include/drm/drm_panel.h
@@ -39,6 +39,8 @@ enum drm_panel_orientation;
* struct drm_panel_funcs - perform operations on a given panel
* @disable: disable panel (turn off back light, etc.)
* @unprepare: turn off panel
+ * @detach: detach panel->connector (clear internal state, etc.)
+ * @attach: attach panel->connector (update internal state, etc.)
* @prepare: turn on panel and perform set up
* @enable: enable panel (turn on back light, etc.)
* @get_modes: add modes to the connector that the panel is attached to and
@@ -95,6 +97,18 @@ struct drm_panel {
const struct drm_panel_funcs *funcs;
+ /*
+ * panel information to be set in the connector when the panel is
+ * attached.
+ */
+ unsigned int width_mm;
+ unsigned int height_mm;
+ unsigned int bpc;
+ int orientation;
+ const u32 *bus_formats;
+ unsigned int num_bus_formats;
+ u32 bus_flags;
+
struct list_head list;
};
--
2.22.0.410.gd8fdbe21b5-goog
Hi Derek.
On Tue, Jul 09, 2019 at 07:16:55PM -0700, Derek Basehore wrote:
> This adds the plumbing for reading panel rotation from the devicetree
> and sets up adding a panel property for the panel orientation on
> Mediatek SoCs when a rotation is present.
>
> v7 changes:
> -forgot to add static inline
>
> v6 changes:
> -added enum declaration to drm_panel.h header
>
> v5 changes:
> -rebased
>
> v4 changes:
> -fixed some changes made to the i915 driver
> -clarified comments on of orientation helper
>
> v3 changes:
> -changed from attach/detach callbacks to directly setting fixed panel
> values in drm_panel_attach
> -removed update to Documentation
> -added separate function for quirked panel orientation property init
>
> v2 changes:
> fixed build errors in i915
>
> Derek Basehore (4):
> drm/panel: Add helper for reading DT rotation
> drm/panel: set display info in panel attach
> drm/connector: Split out orientation quirk detection
> drm/mtk: add panel orientation property
First two patches are:
Reviewed-by: Sam Ravnborg <[email protected]>
Last two patches are:
Acked-by: Sam Ravnborg <[email protected]>
Sam
Hi, Derek:
On Tue, 2019-07-09 at 19:16 -0700, Derek Basehore wrote:
> This inits the panel orientation property for the mediatek dsi driver
> if the panel orientation (connector.display_info.panel_orientation) is
> not DRM_MODE_PANEL_ORIENTATION_UNKNOWN.
>
Reviewed-by: CK Hu <[email protected]>
> Signed-off-by: Derek Basehore <[email protected]>
> ---
> drivers/gpu/drm/mediatek/mtk_dsi.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index b91c4616644a..2920458ae2fb 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -790,10 +790,18 @@ static int mtk_dsi_create_connector(struct drm_device *drm, struct mtk_dsi *dsi)
> DRM_ERROR("Failed to attach panel to drm\n");
> goto err_connector_cleanup;
> }
> +
> + ret = drm_connector_init_panel_orientation_property(&dsi->conn);
> + if (ret) {
> + DRM_ERROR("Failed to init panel orientation\n");
> + goto err_panel_detach;
> + }
> }
>
> return 0;
>
> +err_panel_detach:
> + drm_panel_detach(dsi->panel);
> err_connector_cleanup:
> drm_connector_cleanup(&dsi->conn);
> return ret;
Hi Derek.
On Tue, Jul 09, 2019 at 07:16:57PM -0700, Derek Basehore wrote:
> Devicetree systems can set panel orientation via a panel binding, but
> there's no way, as is, to propagate this setting to the connector,
> where the property need to be added.
> To address this, this patch sets orientation, as well as other fixed
> values for the panel, in the drm_panel_attach function. These values
> are stored from probe in the drm_panel struct.
This approch seems to conflict with work done by Laurent where the
ownership/creation of the connector will be moved to the display controller.
If I understand it correct then there should not be a 1:1 relation
between a panel and a connector anymore.
We should not try to work in two different directions with this.
Laurent, can you comment on this?
If we move forard with this patch, then all fields in drm_panel needs
kernel-doc - preferably inline.
Sam
>
> Signed-off-by: Derek Basehore <[email protected]>
> ---
> drivers/gpu/drm/drm_panel.c | 28 ++++++++++++++++++++++++++++
> include/drm/drm_panel.h | 14 ++++++++++++++
> 2 files changed, 42 insertions(+)
>
> diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
> index 169bab54d52d..ca01095470a9 100644
> --- a/drivers/gpu/drm/drm_panel.c
> +++ b/drivers/gpu/drm/drm_panel.c
> @@ -104,11 +104,23 @@ EXPORT_SYMBOL(drm_panel_remove);
> */
> int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector)
> {
> + struct drm_display_info *info;
> +
> if (panel->connector)
> return -EBUSY;
>
> panel->connector = connector;
> panel->drm = connector->dev;
> + info = &connector->display_info;
> + info->width_mm = panel->width_mm;
> + info->height_mm = panel->height_mm;
> + info->bpc = panel->bpc;
> + info->panel_orientation = panel->orientation;
> + info->bus_flags = panel->bus_flags;
> + if (panel->bus_formats)
> + drm_display_info_set_bus_formats(&connector->display_info,
> + panel->bus_formats,
> + panel->num_bus_formats);
>
> return 0;
> }
> @@ -128,6 +140,22 @@ EXPORT_SYMBOL(drm_panel_attach);
> */
> int drm_panel_detach(struct drm_panel *panel)
> {
> + struct drm_display_info *info;
> +
> + if (!panel->connector)
> + goto out;
> +
> + info = &panel->connector->display_info;
> + info->width_mm = 0;
> + info->height_mm = 0;
> + info->bpc = 0;
> + info->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> + info->bus_flags = 0;
> + kfree(info->bus_formats);
> + info->bus_formats = NULL;
> + info->num_bus_formats = 0;
> +
> +out:
> panel->connector = NULL;
> panel->drm = NULL;
>
> diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
> index fc7da55f41d9..a6a881b987dd 100644
> --- a/include/drm/drm_panel.h
> +++ b/include/drm/drm_panel.h
> @@ -39,6 +39,8 @@ enum drm_panel_orientation;
> * struct drm_panel_funcs - perform operations on a given panel
> * @disable: disable panel (turn off back light, etc.)
> * @unprepare: turn off panel
> + * @detach: detach panel->connector (clear internal state, etc.)
> + * @attach: attach panel->connector (update internal state, etc.)
> * @prepare: turn on panel and perform set up
> * @enable: enable panel (turn on back light, etc.)
> * @get_modes: add modes to the connector that the panel is attached to and
> @@ -95,6 +97,18 @@ struct drm_panel {
>
> const struct drm_panel_funcs *funcs;
>
> + /*
> + * panel information to be set in the connector when the panel is
> + * attached.
> + */
> + unsigned int width_mm;
> + unsigned int height_mm;
> + unsigned int bpc;
> + int orientation;
> + const u32 *bus_formats;
> + unsigned int num_bus_formats;
> + u32 bus_flags;
> +
> struct list_head list;
> };
>
> --
> 2.22.0.410.gd8fdbe21b5-goog
>
> _______________________________________________
> dri-devel mailing list
> [email protected]
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Sam, thanks for pointing out the potential conflict.
On Tue, Jul 23, 2019 at 2:19 AM Sam Ravnborg <[email protected]> wrote:
>
> Hi Derek.
>
> On Tue, Jul 09, 2019 at 07:16:57PM -0700, Derek Basehore wrote:
> > Devicetree systems can set panel orientation via a panel binding, but
> > there's no way, as is, to propagate this setting to the connector,
> > where the property need to be added.
> > To address this, this patch sets orientation, as well as other fixed
> > values for the panel, in the drm_panel_attach function. These values
> > are stored from probe in the drm_panel struct.
>
> This approch seems to conflict with work done by Laurent where the
> ownership/creation of the connector will be moved to the display controller.
>
> If I understand it correct then there should not be a 1:1 relation
> between a panel and a connector anymore.
Can you point me to this work? I still see the lone drm_display_info
struct in the drm_connector struct. This seems to indicate that the
kernel still assume one display per connector.
>
> We should not try to work in two different directions with this.
> Laurent, can you comment on this?
>
> If we move forard with this patch, then all fields in drm_panel needs
> kernel-doc - preferably inline.
>
> Sam
>
> >
> > Signed-off-by: Derek Basehore <[email protected]>
> > ---
> > drivers/gpu/drm/drm_panel.c | 28 ++++++++++++++++++++++++++++
> > include/drm/drm_panel.h | 14 ++++++++++++++
> > 2 files changed, 42 insertions(+)
> >
> > diff --git a/drivers/gpu/drm/drm_panel.c b/drivers/gpu/drm/drm_panel.c
> > index 169bab54d52d..ca01095470a9 100644
> > --- a/drivers/gpu/drm/drm_panel.c
> > +++ b/drivers/gpu/drm/drm_panel.c
> > @@ -104,11 +104,23 @@ EXPORT_SYMBOL(drm_panel_remove);
> > */
> > int drm_panel_attach(struct drm_panel *panel, struct drm_connector *connector)
> > {
> > + struct drm_display_info *info;
> > +
> > if (panel->connector)
> > return -EBUSY;
> >
> > panel->connector = connector;
> > panel->drm = connector->dev;
> > + info = &connector->display_info;
> > + info->width_mm = panel->width_mm;
> > + info->height_mm = panel->height_mm;
> > + info->bpc = panel->bpc;
> > + info->panel_orientation = panel->orientation;
> > + info->bus_flags = panel->bus_flags;
> > + if (panel->bus_formats)
> > + drm_display_info_set_bus_formats(&connector->display_info,
> > + panel->bus_formats,
> > + panel->num_bus_formats);
> >
> > return 0;
> > }
> > @@ -128,6 +140,22 @@ EXPORT_SYMBOL(drm_panel_attach);
> > */
> > int drm_panel_detach(struct drm_panel *panel)
> > {
> > + struct drm_display_info *info;
> > +
> > + if (!panel->connector)
> > + goto out;
> > +
> > + info = &panel->connector->display_info;
> > + info->width_mm = 0;
> > + info->height_mm = 0;
> > + info->bpc = 0;
> > + info->panel_orientation = DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
> > + info->bus_flags = 0;
> > + kfree(info->bus_formats);
> > + info->bus_formats = NULL;
> > + info->num_bus_formats = 0;
> > +
> > +out:
> > panel->connector = NULL;
> > panel->drm = NULL;
> >
> > diff --git a/include/drm/drm_panel.h b/include/drm/drm_panel.h
> > index fc7da55f41d9..a6a881b987dd 100644
> > --- a/include/drm/drm_panel.h
> > +++ b/include/drm/drm_panel.h
> > @@ -39,6 +39,8 @@ enum drm_panel_orientation;
> > * struct drm_panel_funcs - perform operations on a given panel
> > * @disable: disable panel (turn off back light, etc.)
> > * @unprepare: turn off panel
> > + * @detach: detach panel->connector (clear internal state, etc.)
> > + * @attach: attach panel->connector (update internal state, etc.)
> > * @prepare: turn on panel and perform set up
> > * @enable: enable panel (turn on back light, etc.)
> > * @get_modes: add modes to the connector that the panel is attached to and
> > @@ -95,6 +97,18 @@ struct drm_panel {
> >
> > const struct drm_panel_funcs *funcs;
> >
> > + /*
> > + * panel information to be set in the connector when the panel is
> > + * attached.
> > + */
> > + unsigned int width_mm;
> > + unsigned int height_mm;
> > + unsigned int bpc;
> > + int orientation;
> > + const u32 *bus_formats;
> > + unsigned int num_bus_formats;
> > + u32 bus_flags;
> > +
> > struct list_head list;
> > };
> >
> > --
> > 2.22.0.410.gd8fdbe21b5-goog
> >
> > _______________________________________________
> > dri-devel mailing list
> > [email protected]
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
Hi Derek.
On Wed, Jul 24, 2019 at 03:15:19PM -0700, dbasehore . wrote:
> Hi Sam, thanks for pointing out the potential conflict.
>
> On Tue, Jul 23, 2019 at 2:19 AM Sam Ravnborg <[email protected]> wrote:
> >
> > Hi Derek.
> >
> > On Tue, Jul 09, 2019 at 07:16:57PM -0700, Derek Basehore wrote:
> > > Devicetree systems can set panel orientation via a panel binding, but
> > > there's no way, as is, to propagate this setting to the connector,
> > > where the property need to be added.
> > > To address this, this patch sets orientation, as well as other fixed
> > > values for the panel, in the drm_panel_attach function. These values
> > > are stored from probe in the drm_panel struct.
> >
> > This approch seems to conflict with work done by Laurent where the
> > ownership/creation of the connector will be moved to the display controller.
> >
> > If I understand it correct then there should not be a 1:1 relation
> > between a panel and a connector anymore.
>
>
> Can you point me to this work?
Please take a look at the series with subject:
"[PATCH 00/60] drm/omap: Replace custom display drivers with drm_bridge
and drm_panel"
Link: https://patchwork.kernel.org/cover/11034175/
Laurent has done a great job explaining the background,
If you look into the patched you will see the idea is that a drm_panel
no longer get attached to a drm_controller - it will be an argument to
get_modes().
Sam