This series kills the long standing MODVERDIR.
Since MODVERDIR has a flat structure, it cannot avoid a race
condition when somebody introduces a module name conflict.
Kbuild now reads modules.order to get the list of all modules.
The post-processing/installation stages will be more robust
and simpler.
Masahiro Yamada (11):
kbuild: do not create empty modules.order in the prepare stage
kbuild: get rid of kernel/ prefix from in-tree modules.{order,builtin}
kbuild: remove duplication from modules.order in sub-directories
scsi: remove pointless $(MODVERDIR)/$(obj)/53c700.ver
kbuild: modinst: read modules.order instead of $(MODVERDIR)/*.mod
kbuild: modsign: read modules.order instead of $(MODVERDIR)/*.mod
kbuild: modpost: read modules.order instead of $(MODVERDIR)/*.mod
kbuild: create *.mod with full directory path and remove MODVERDIR
kbuild: remove the first line of *.mod files
kbuild: remove 'prepare1' target
kbuild: split out *.mod out of {single,multi}-used-m rules
.gitignore | 1 +
Documentation/dontdiff | 1 +
Makefile | 36 ++++++++++--------------------------
drivers/scsi/Makefile | 2 +-
scripts/Makefile.build | 33 +++++++++++++++------------------
scripts/Makefile.modbuiltin | 2 +-
scripts/Makefile.modinst | 5 +----
scripts/Makefile.modpost | 17 +++++++++--------
scripts/Makefile.modsign | 3 +--
scripts/adjust_autoksyms.sh | 11 ++++-------
scripts/mod/sumversion.c | 23 ++++-------------------
scripts/modules-check.sh | 2 +-
scripts/package/mkspec | 2 +-
13 files changed, 50 insertions(+), 88 deletions(-)
--
2.17.1
While descending directories, Kbuild produces objects for modules,
but do not link final *.ko files; it is done in the modpost.
To keep track of modules, Kbuild creates a *.mod file in $(MODVERDIR)
for every module it is building. Some post-processing steps read the
necessary information from *.mod files. This avoids descending into
directories again. This mechanism was introduced in 2003 or so.
Later, commit 551559e13af1 ("kbuild: implement modules.order") added
modules.order. So, we can simply read it out to know all the modules
with directory paths. This is easier than parsing the first line of
*.mod files.
$(MODVERDIR) has a flat directory structure, that is, *.mod files
are named only with base names. This is based on the assumption that
the module name is unique across the tree. This assumption is really
fragile.
Stephen Rothwell reported a race condition caused by a module name
conflict:
https://lkml.org/lkml/2019/5/13/991
In parallel building, two different threads could write to the same
$(MODVERDIR)/*.mod simultaneously.
Non-unique module names are the source of all kind of troubles, hence
commit 3a48a91901c5 ("kbuild: check uniqueness of module names")
introduced a new checker script.
However, it is still fragile in the build system point of view because
this race happens before scripts/modules-check.sh is invoked. If it
happens again, the modpost will emit unclear error messages.
To fix this issue completely, create *.mod in the same directory as
*.ko so that two threads never attempt to write to the same file.
$(MODVERDIR) is no longer needed.
Since modules with directory paths are listed in modules.order, Kbuild
is still able to find *.mod files without additional descending.
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Nicolas Pitre <[email protected]>
---
Changes in v2:
- Remove -r of xargs, which is a GNU extension
- Add '--' for extra safety
.gitignore | 1 +
Documentation/dontdiff | 1 +
Makefile | 20 +++-----------------
scripts/Makefile.build | 8 ++------
scripts/Makefile.modpost | 4 ++--
scripts/adjust_autoksyms.sh | 11 ++++-------
scripts/mod/sumversion.c | 16 +++-------------
scripts/package/mkspec | 2 +-
8 files changed, 17 insertions(+), 46 deletions(-)
diff --git a/.gitignore b/.gitignore
index 7587ef56b92d..8f5422cba6e2 100644
--- a/.gitignore
+++ b/.gitignore
@@ -30,6 +30,7 @@
*.lz4
*.lzma
*.lzo
+*.mod
*.mod.c
*.o
*.o.*
diff --git a/Documentation/dontdiff b/Documentation/dontdiff
index 5eba889ea84d..9f4392876099 100644
--- a/Documentation/dontdiff
+++ b/Documentation/dontdiff
@@ -30,6 +30,7 @@
*.lzo
*.mo
*.moc
+*.mod
*.mod.c
*.o
*.o.*
diff --git a/Makefile b/Makefile
index b5e21d676ee2..4243b6daffcf 100644
--- a/Makefile
+++ b/Makefile
@@ -488,11 +488,6 @@ export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
export KBUILD_ARFLAGS
-# When compiling out-of-tree modules, put MODVERDIR in the module
-# tree rather than in the kernel tree. The kernel tree might
-# even be read-only.
-export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
-
# Files to ignore in find ... statements
export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
@@ -1033,7 +1028,7 @@ vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)
# Recurse until adjust_autoksyms.sh is satisfied
PHONY += autoksyms_recursive
-autoksyms_recursive: $(vmlinux-deps)
+autoksyms_recursive: $(vmlinux-deps) modules.order
ifdef CONFIG_TRIM_UNUSED_KSYMS
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \
"$(MAKE) -f $(srctree)/Makefile vmlinux"
@@ -1117,7 +1112,6 @@ endif
prepare1: prepare3 outputmakefile asm-generic $(version_h) $(autoksyms_h) \
include/generated/utsrelease.h
- $(cmd_crmodverdir)
archprepare: archheaders archscripts prepare1 scripts
@@ -1375,7 +1369,7 @@ endif # CONFIG_MODULES
# make distclean Remove editor backup files, patch leftover files and the like
# Directories & files removed with 'make clean'
-CLEAN_DIRS += $(MODVERDIR) include/ksym
+CLEAN_DIRS += include/ksym
CLEAN_FILES += modules.builtin.modinfo
# Directories & files removed with 'make mrproper'
@@ -1636,7 +1630,6 @@ PHONY += $(clean-dirs) clean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
-clean: rm-dirs := $(MODVERDIR)
clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
PHONY += help
@@ -1650,8 +1643,6 @@ help:
@echo ''
PHONY += prepare
-prepare:
- $(cmd_crmodverdir)
endif # KBUILD_EXTMOD
clean: $(clean-dirs)
@@ -1662,7 +1653,7 @@ clean: $(clean-dirs)
-o -name '*.ko.*' \
-o -name '*.dtb' -o -name '*.dtb.S' -o -name '*.dt.yaml' \
-o -name '*.dwo' -o -name '*.lst' \
- -o -name '*.su' \
+ -o -name '*.su' -o -name '*.mod' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
-o -name '*.lex.c' -o -name '*.tab.[ch]' \
-o -name '*.asn1.[ch]' \
@@ -1791,11 +1782,6 @@ quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
$(KERNELRELEASE)
-# Create temporary dir for module support files
-# clean it up only when building all modules
-cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
- $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
-
# read saved command lines for existing targets
existing-targets := $(wildcard $(sort $(targets)))
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 98dede0b2ca8..9fb30633acd2 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -67,8 +67,6 @@ ifeq ($(CONFIG_MODULES)$(need-modorder),y1)
modorder-target := $(obj)/modules.order
endif
-# We keep a list of all modules in $(MODVERDIR)
-
__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
$(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
$(subdir-ym) $(always)
@@ -278,13 +276,11 @@ $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
$(call cmd,force_checksrc)
$(call if_changed_rule,cc_o_c)
-# Single-part modules are special since we need to mark them in $(MODVERDIR)
-
$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
$(call cmd,force_checksrc)
$(call if_changed_rule,cc_o_c)
@{ echo $(@:.o=.ko); echo $@; \
- $(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
+ $(cmd_undef_syms); } > $(patsubst %.o,%.mod,$@)
quiet_cmd_cc_lst_c = MKLST $@
cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
@@ -466,7 +462,7 @@ cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@ $(filter %.o,$^) $(cmd_secanalysis
$(multi-used-m): FORCE
$(call if_changed,link_multi-m)
@{ echo $(@:.o=.ko); echo $(filter %.o,$^); \
- $(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
+ $(cmd_undef_syms); } > $(patsubst %.o,%.mod,$@)
$(call multi_depend, $(multi-used-m), .o, -objs -y -m)
targets += $(multi-used-m)
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index 2ab1694a7df3..3e229d4f4d72 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -6,8 +6,8 @@
# Stage one of module building created the following:
# a) The individual .o files used for the module
# b) A <module>.o file which is the .o files above linked together
-# c) A <module>.mod file in $(MODVERDIR)/, listing the name of the
-# the preliminary <module>.o file, plus all .o files
+# c) A <module>.mod file, listing the name of the preliminary <module>.o file,
+# plus all .o files
# d) modules.order, which lists all the modules
# Stage 2 is handled by this file and does the following
diff --git a/scripts/adjust_autoksyms.sh b/scripts/adjust_autoksyms.sh
index aab4e299d7a2..8b44bb80a451 100755
--- a/scripts/adjust_autoksyms.sh
+++ b/scripts/adjust_autoksyms.sh
@@ -47,13 +47,10 @@ cat > "$new_ksyms_file" << EOT
*/
EOT
-[ "$(ls -A "$MODVERDIR")" ] &&
-for mod in "$MODVERDIR"/*.mod; do
- sed -n -e '3{s/ /\n/g;/^$/!p;}' "$mod"
-done | sort -u |
-while read sym; do
- echo "#define __KSYM_${sym} 1"
-done >> "$new_ksyms_file"
+sed 's/ko$/mod/' modules.order |
+xargs -n1 sed -n -e '3{s/ /\n/g;/^$/!p;}' -- |
+sort -u |
+sed -e 's/\(.*\)/#define __KSYM_\1 1/' >> "$new_ksyms_file"
# Special case for modversions (see modpost.c)
if [ -n "$CONFIG_MODVERSIONS" ]; then
diff --git a/scripts/mod/sumversion.c b/scripts/mod/sumversion.c
index 0f6dcb4011a8..166f3fa247a9 100644
--- a/scripts/mod/sumversion.c
+++ b/scripts/mod/sumversion.c
@@ -396,21 +396,11 @@ void get_src_version(const char *modname, char sum[], unsigned sumlen)
unsigned long len;
struct md4_ctx md;
char *sources, *end, *fname;
- const char *basename;
char filelist[PATH_MAX + 1];
- char *modverdir = getenv("MODVERDIR");
- if (!modverdir)
- modverdir = ".";
-
- /* Source files for module are in .tmp_versions/modname.mod,
- after the first line. */
- if (strrchr(modname, '/'))
- basename = strrchr(modname, '/') + 1;
- else
- basename = modname;
- snprintf(filelist, sizeof(filelist), "%s/%.*s.mod", modverdir,
- (int) strlen(basename) - 2, basename);
+ /* objects for a module are listed in the second line of *.mod file. */
+ snprintf(filelist, sizeof(filelist), "%.*smod",
+ (int)strlen(modname) - 1, modname);
file = grab_file(filelist, &len);
if (!file)
diff --git a/scripts/package/mkspec b/scripts/package/mkspec
index 2d29df4a0a53..8640c278f1aa 100755
--- a/scripts/package/mkspec
+++ b/scripts/package/mkspec
@@ -29,7 +29,7 @@ fi
PROVIDES="$PROVIDES kernel-$KERNELRELEASE"
__KERNELRELEASE=$(echo $KERNELRELEASE | sed -e "s/-/_/g")
-EXCLUDES="$RCS_TAR_IGNORE --exclude=.tmp_versions --exclude=*vmlinux* \
+EXCLUDES="$RCS_TAR_IGNORE --exclude=*vmlinux* --exclude=*.mod \
--exclude=*.o --exclude=*.ko --exclude=*.cmd --exclude=Documentation \
--exclude=.config.old --exclude=.missing-syscalls.d --exclude=*.s"
--
2.17.1
Towards the goal of removing MODVERDIR, read out modules.order to get
the list of modules to be installed. This is simpler than parsing *.mod
files in $(MODVERDIR).
For external modules, $(KBUILD_EXTMOD)/modules.order should be read.
Signed-off-by: Masahiro Yamada <[email protected]>
---
Changes in v2: None
scripts/Makefile.modinst | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/scripts/Makefile.modinst b/scripts/Makefile.modinst
index 0dae402661f3..5a4579e76485 100644
--- a/scripts/Makefile.modinst
+++ b/scripts/Makefile.modinst
@@ -8,10 +8,7 @@ __modinst:
include scripts/Kbuild.include
-#
-
-__modules := $(sort $(shell grep -h '\.ko$$' /dev/null $(wildcard $(MODVERDIR)/*.mod)))
-modules := $(patsubst %.o,%.ko,$(wildcard $(__modules:.ko=.o)))
+modules := $(sort $(shell cat $(if $(KBUILD_EXTMOD),$(KBUILD_EXTMOD)/)modules.order))
PHONY += $(modules)
__modinst: $(modules)
--
2.17.1
Towards the goal of removing MODVERDIR, read out modules.order to get
the list of modules to be signed. This is simpler than parsing *.mod
files in $(MODVERDIR).
The modules_sign target is only supported for in-kernel modules.
So, this commit does not take care of external modules.
Signed-off-by: Masahiro Yamada <[email protected]>
---
Changes in v2: None
scripts/Makefile.modsign | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/scripts/Makefile.modsign b/scripts/Makefile.modsign
index da56aa78d245..d7325cefe709 100644
--- a/scripts/Makefile.modsign
+++ b/scripts/Makefile.modsign
@@ -8,8 +8,7 @@ __modsign:
include scripts/Kbuild.include
-__modules := $(sort $(shell grep -h '\.ko$$' /dev/null $(wildcard $(MODVERDIR)/*.mod)))
-modules := $(patsubst %.o,%.ko,$(wildcard $(__modules:.ko=.o)))
+modules := $(sort $(shell cat modules.order))
PHONY += $(modules)
__modsign: $(modules)
--
2.17.1
Currently, *.mod is created as a side-effect of obj-m.
Split out *.mod as a dedicated build rule, which allows to unify
the %.c -> %.o rule, and remove the single-used-m rule.
This also makes the incremental build of allmodconfig faster because
it saves $(NM) invocation when there is no change in the module.
Signed-off-by: Masahiro Yamada <[email protected]>
---
Changes in v2: None
scripts/Makefile.build | 22 +++++++++++++---------
1 file changed, 13 insertions(+), 9 deletions(-)
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 2709646b1a5d..63fc266b4985 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -67,8 +67,10 @@ ifeq ($(CONFIG_MODULES)$(need-modorder),y1)
modorder-target := $(obj)/modules.order
endif
+mod-targets := $(patsubst %.o, %.mod, $(obj-m))
+
__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
- $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
+ $(if $(KBUILD_MODULES),$(obj-m) $(mod-targets) $(modorder-target)) \
$(subdir-ym) $(always)
@:
@@ -266,7 +268,7 @@ endef
# List module undefined symbols (or empty line if not enabled)
ifdef CONFIG_TRIM_UNUSED_KSYMS
-cmd_undef_syms = $(NM) $@ | sed -n 's/^ *U //p' | xargs echo
+cmd_undef_syms = $(NM) $< | sed -n 's/^ *U //p' | xargs echo
else
cmd_undef_syms = echo
endif
@@ -276,11 +278,15 @@ $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
$(call cmd,force_checksrc)
$(call if_changed_rule,cc_o_c)
-$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
- $(call cmd,force_checksrc)
- $(call if_changed_rule,cc_o_c)
- @{ echo $@; \
- $(cmd_undef_syms); } > $(patsubst %.o,%.mod,$@)
+cmd_mod = { \
+ echo $(if $($*-objs)$($*-y)$($*-m), $(addprefix $(obj)/, $($*-objs) $($*-y) $($*-m)), $(@:.mod=.o)); \
+ $(cmd_undef_syms); \
+ } > $@
+
+$(obj)/%.mod: $(obj)/%.o FORCE
+ $(call if_changed,mod)
+
+targets += $(mod-targets)
quiet_cmd_cc_lst_c = MKLST $@
cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
@@ -461,8 +467,6 @@ cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@ $(filter %.o,$^) $(cmd_secanalysis
$(multi-used-m): FORCE
$(call if_changed,link_multi-m)
- @{ echo $(filter %.o,$^); \
- $(cmd_undef_syms); } > $(patsubst %.o,%.mod,$@)
$(call multi_depend, $(multi-used-m), .o, -objs -y -m)
targets += $(multi-used-m)
--
2.17.1
Currently, only the top-level modules.order drops duplicated entries.
The modules.order files in sub-directories potentially contain
duplication. To list out the paths of all modules, I want to use
modules.order instead of parsing *.mod files in $(MODVERDIR).
To achieve this, I want to rip off duplication from modules.order
of external modules too.
Signed-off-by: Masahiro Yamada <[email protected]>
---
Changes in v2: None
scripts/Makefile.build | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index f21d691c776a..98dede0b2ca8 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -423,13 +423,10 @@ endif # builtin-target
#
# Create commands to either record .ko file or cat modules.order from
# a subdirectory
-modorder-cmds = \
- $(foreach m, $(modorder), \
- $(if $(filter %/modules.order, $m), \
- cat $m;, echo $m;))
-
$(modorder-target): $(subdir-ym) FORCE
- $(Q)(cat /dev/null; $(modorder-cmds)) > $@
+ $(Q){ $(foreach m, $(modorder), \
+ $(if $(filter %/modules.order, $m), cat $m, echo $m);) :; } \
+ | $(AWK) '!x[$$0]++' - > $@
#
# Rule to compile a set of .o files into one .a file (with symbol table)
--
2.17.1
Currently, $(objtree)/modules.order is touched in two places.
In the 'prepare0' rule, scripts/Makefile.build creates an empty
modules.order while processing 'obj=.'
In the 'modules' rule, the top-level Makefile overwrites it with
the correct list of modules.
While this might be a good side-effect that modules.order is made
empty every time (probably this is not intended functionality),
I personally do not like this behavior.
Create modules.order only when it is sensible to do so.
This avoids creating the following pointless files:
scripts/basic/modules.order
scripts/dtc/modules.order
scripts/gcc-plugins/modules.order
scripts/genksyms/modules.order
scripts/mod/modules.order
scripts/modules.order
scripts/selinux/genheaders/modules.order
scripts/selinux/mdp/modules.order
scripts/selinux/modules.order
Going forward, $(objtree)/modules.order lists the modules that
was built in the last successful build.
Signed-off-by: Masahiro Yamada <[email protected]>
---
Changes in v2:
- inverted the logic "preparing" -> need-modorder
Makefile | 4 ++--
scripts/Makefile.build | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/Makefile b/Makefile
index 5c75ea7177f6..d8421d245f75 100644
--- a/Makefile
+++ b/Makefile
@@ -1076,7 +1076,7 @@ $(sort $(vmlinux-deps)): $(vmlinux-dirs) ;
PHONY += $(vmlinux-dirs)
$(vmlinux-dirs): prepare
- $(Q)$(MAKE) $(build)=$@ need-builtin=1
+ $(Q)$(MAKE) $(build)=$@ need-builtin=1 need-modorder=1
filechk_kernel.release = \
echo "$(KERNELVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
@@ -1611,7 +1611,7 @@ $(objtree)/Module.symvers:
module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
PHONY += $(module-dirs) modules
$(module-dirs): prepare $(objtree)/Module.symvers
- $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
+ $(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@) need-modorder=1
modules: $(module-dirs)
@$(kecho) ' Building modules, stage 2.';
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 776842b7e6a3..e9b3d88257dd 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -63,7 +63,7 @@ ifneq ($(strip $(real-obj-y) $(need-builtin)),)
builtin-target := $(obj)/built-in.a
endif
-ifdef CONFIG_MODULES
+ifeq ($(CONFIG_MODULES)$(need-modorder),y1)
modorder-target := $(obj)/modules.order
endif
--
2.17.1
Now that there is no rule for 'prepare1', it can go away.
Signed-off-by: Masahiro Yamada <[email protected]>
---
Changes in v2: None
Makefile | 8 +++-----
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/Makefile b/Makefile
index 4243b6daffcf..8de893e41149 100644
--- a/Makefile
+++ b/Makefile
@@ -1093,7 +1093,7 @@ scripts: scripts_basic scripts_dtc
# archprepare is used in arch Makefiles and when processed asm symlink,
# version.h and scripts_basic is processed / created.
-PHONY += prepare archprepare prepare1 prepare3
+PHONY += prepare archprepare prepare3
# prepare3 is used to check if we are building in a separate output directory,
# and if so do:
@@ -1110,10 +1110,8 @@ ifneq ($(srctree),.)
fi;
endif
-prepare1: prepare3 outputmakefile asm-generic $(version_h) $(autoksyms_h) \
- include/generated/utsrelease.h
-
-archprepare: archheaders archscripts prepare1 scripts
+archprepare: archheaders archscripts scripts prepare3 outputmakefile \
+ asm-generic $(version_h) $(autoksyms_h) include/generated/utsrelease.h
prepare0: archprepare
$(Q)$(MAKE) $(build)=scripts/mod
--
2.17.1
The current format of *.mod is like this:
line 1: directory path to the .ko file
line 2: a list of objects linked into this module
line 3: unresolved symbols (only when CONFIG_TRIM_UNUSED_KSYMS=y)
Now that *.mod and *.ko are created in the same directory, the line 1
provides no valuable information. It can be derived by replacing the
extension .mod with .ko.
Cut the first line.
Signed-off-by: Masahiro Yamada <[email protected]>
---
Changes in v2: None
scripts/Makefile.build | 4 ++--
scripts/adjust_autoksyms.sh | 2 +-
scripts/mod/sumversion.c | 9 ++-------
3 files changed, 5 insertions(+), 10 deletions(-)
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index 9fb30633acd2..2709646b1a5d 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -279,7 +279,7 @@ $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
$(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
$(call cmd,force_checksrc)
$(call if_changed_rule,cc_o_c)
- @{ echo $(@:.o=.ko); echo $@; \
+ @{ echo $@; \
$(cmd_undef_syms); } > $(patsubst %.o,%.mod,$@)
quiet_cmd_cc_lst_c = MKLST $@
@@ -461,7 +461,7 @@ cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@ $(filter %.o,$^) $(cmd_secanalysis
$(multi-used-m): FORCE
$(call if_changed,link_multi-m)
- @{ echo $(@:.o=.ko); echo $(filter %.o,$^); \
+ @{ echo $(filter %.o,$^); \
$(cmd_undef_syms); } > $(patsubst %.o,%.mod,$@)
$(call multi_depend, $(multi-used-m), .o, -objs -y -m)
diff --git a/scripts/adjust_autoksyms.sh b/scripts/adjust_autoksyms.sh
index 8b44bb80a451..89871cae3954 100755
--- a/scripts/adjust_autoksyms.sh
+++ b/scripts/adjust_autoksyms.sh
@@ -48,7 +48,7 @@ cat > "$new_ksyms_file" << EOT
EOT
sed 's/ko$/mod/' modules.order |
-xargs -n1 sed -n -e '3{s/ /\n/g;/^$/!p;}' -- |
+xargs -n1 sed -n -e '2{s/ /\n/g;/^$/!p;}' -- |
sort -u |
sed -e 's/\(.*\)/#define __KSYM_\1 1/' >> "$new_ksyms_file"
diff --git a/scripts/mod/sumversion.c b/scripts/mod/sumversion.c
index 166f3fa247a9..63062024ce0e 100644
--- a/scripts/mod/sumversion.c
+++ b/scripts/mod/sumversion.c
@@ -398,7 +398,7 @@ void get_src_version(const char *modname, char sum[], unsigned sumlen)
char *sources, *end, *fname;
char filelist[PATH_MAX + 1];
- /* objects for a module are listed in the second line of *.mod file. */
+ /* objects for a module are listed in the first line of *.mod file. */
snprintf(filelist, sizeof(filelist), "%.*smod",
(int)strlen(modname) - 1, modname);
@@ -407,13 +407,8 @@ void get_src_version(const char *modname, char sum[], unsigned sumlen)
/* not a module or .mod file missing - ignore */
return;
- sources = strchr(file, '\n');
- if (!sources) {
- warn("malformed versions file for %s\n", modname);
- goto release;
- }
+ sources = file;
- sources++;
end = strchr(sources, '\n');
if (!end) {
warn("bad ending versions file for %s\n", modname);
--
2.17.1
Removing the 'kernel/' prefix will make our life easier because we can
simply do 'cat modules.order' to get all built modules with full paths.
Currently, we parse the first line of '*.mod' files in $(MODVERDIR).
Since we have duplicated functionality here, I plan to remove MODVERDIR
entirely.
In fact, modules.order is generated also for external modules in a
broken format. It adds the 'kernel/' prefix to the absolute path of
the module, like this:
kernel//path/to/your/external/module/foo.ko
This is fine for now since modules.order is not used for external
modules. However, I want to sanitize the format everywhere towards
the goal of removing MODVERDIR.
We cannot change the format of installed module.{order,builtin}.
So, 'make modules_install' will add the 'kernel/' prefix while copying
them to $(MODLIB)/.
Signed-off-by: Masahiro Yamada <[email protected]>
---
Changes in v2: None
Makefile | 4 ++--
scripts/Makefile.build | 2 +-
scripts/Makefile.modbuiltin | 2 +-
scripts/modules-check.sh | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/Makefile b/Makefile
index d8421d245f75..b5e21d676ee2 100644
--- a/Makefile
+++ b/Makefile
@@ -1333,8 +1333,8 @@ _modinst_:
rm -f $(MODLIB)/build ; \
ln -s $(CURDIR) $(MODLIB)/build ; \
fi
- @cp -f $(objtree)/modules.order $(MODLIB)/
- @cp -f $(objtree)/modules.builtin $(MODLIB)/
+ @sed 's:^:kernel/:' modules.order > $(MODLIB)/modules.order
+ @sed 's:^:kernel/:' modules.builtin > $(MODLIB)/modules.builtin
@cp -f $(objtree)/modules.builtin.modinfo $(MODLIB)/
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modinst
diff --git a/scripts/Makefile.build b/scripts/Makefile.build
index e9b3d88257dd..f21d691c776a 100644
--- a/scripts/Makefile.build
+++ b/scripts/Makefile.build
@@ -426,7 +426,7 @@ endif # builtin-target
modorder-cmds = \
$(foreach m, $(modorder), \
$(if $(filter %/modules.order, $m), \
- cat $m;, echo kernel/$m;))
+ cat $m;, echo $m;))
$(modorder-target): $(subdir-ym) FORCE
$(Q)(cat /dev/null; $(modorder-cmds)) > $@
diff --git a/scripts/Makefile.modbuiltin b/scripts/Makefile.modbuiltin
index ea90a90b41a0..12ac300fe51b 100644
--- a/scripts/Makefile.modbuiltin
+++ b/scripts/Makefile.modbuiltin
@@ -40,7 +40,7 @@ __modbuiltin: $(modbuiltin-target) $(subdir-ym)
@:
$(modbuiltin-target): $(subdir-ym) FORCE
- $(Q)(for m in $(modbuiltin-mods); do echo kernel/$$m; done; \
+ $(Q)(for m in $(modbuiltin-mods); do echo $$m; done; \
cat /dev/null $(modbuiltin-subdirs)) > $@
PHONY += FORCE
diff --git a/scripts/modules-check.sh b/scripts/modules-check.sh
index 39e8cb36ba19..f51f446707b8 100755
--- a/scripts/modules-check.sh
+++ b/scripts/modules-check.sh
@@ -9,7 +9,7 @@ check_same_name_modules()
for m in $(sed 's:.*/::' modules.order | sort | uniq -d)
do
echo "warning: same module names found:" >&2
- sed -n "/\/$m/s:^kernel/: :p" modules.order >&2
+ sed -n "/\/$m/s:^: :p" modules.order >&2
done
}
--
2.17.1
On Thu, Jul 11, 2019 at 02:44:31PM +0900, Masahiro Yamada wrote:
> While descending directories, Kbuild produces objects for modules,
> but do not link final *.ko files; it is done in the modpost.
>
> To keep track of modules, Kbuild creates a *.mod file in $(MODVERDIR)
> for every module it is building. Some post-processing steps read the
> necessary information from *.mod files. This avoids descending into
> directories again. This mechanism was introduced in 2003 or so.
>
> Later, commit 551559e13af1 ("kbuild: implement modules.order") added
> modules.order. So, we can simply read it out to know all the modules
> with directory paths. This is easier than parsing the first line of
> *.mod files.
>
> $(MODVERDIR) has a flat directory structure, that is, *.mod files
> are named only with base names. This is based on the assumption that
> the module name is unique across the tree. This assumption is really
> fragile.
>
> Stephen Rothwell reported a race condition caused by a module name
> conflict:
>
> https://lkml.org/lkml/2019/5/13/991
>
> In parallel building, two different threads could write to the same
> $(MODVERDIR)/*.mod simultaneously.
>
> Non-unique module names are the source of all kind of troubles, hence
> commit 3a48a91901c5 ("kbuild: check uniqueness of module names")
> introduced a new checker script.
>
> However, it is still fragile in the build system point of view because
> this race happens before scripts/modules-check.sh is invoked. If it
> happens again, the modpost will emit unclear error messages.
>
> To fix this issue completely, create *.mod in the same directory as
> *.ko so that two threads never attempt to write to the same file.
> $(MODVERDIR) is no longer needed.
>
> Since modules with directory paths are listed in modules.order, Kbuild
> is still able to find *.mod files without additional descending.
>
> Signed-off-by: Masahiro Yamada <[email protected]>
> Acked-by: Nicolas Pitre <[email protected]>
> ---
>
> Changes in v2:
> - Remove -r of xargs, which is a GNU extension
> - Add '--' for extra safety
>
> .gitignore | 1 +
> Documentation/dontdiff | 1 +
> Makefile | 20 +++-----------------
> scripts/Makefile.build | 8 ++------
> scripts/Makefile.modpost | 4 ++--
> scripts/adjust_autoksyms.sh | 11 ++++-------
> scripts/mod/sumversion.c | 16 +++-------------
> scripts/package/mkspec | 2 +-
> 8 files changed, 17 insertions(+), 46 deletions(-)
>
> diff --git a/.gitignore b/.gitignore
> index 7587ef56b92d..8f5422cba6e2 100644
> --- a/.gitignore
> +++ b/.gitignore
> @@ -30,6 +30,7 @@
> *.lz4
> *.lzma
> *.lzo
> +*.mod
> *.mod.c
> *.o
> *.o.*
> diff --git a/Documentation/dontdiff b/Documentation/dontdiff
> index 5eba889ea84d..9f4392876099 100644
> --- a/Documentation/dontdiff
> +++ b/Documentation/dontdiff
> @@ -30,6 +30,7 @@
> *.lzo
> *.mo
> *.moc
> +*.mod
> *.mod.c
> *.o
> *.o.*
> diff --git a/Makefile b/Makefile
> index b5e21d676ee2..4243b6daffcf 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -488,11 +488,6 @@ export KBUILD_AFLAGS_MODULE KBUILD_CFLAGS_MODULE KBUILD_LDFLAGS_MODULE
> export KBUILD_AFLAGS_KERNEL KBUILD_CFLAGS_KERNEL
> export KBUILD_ARFLAGS
>
> -# When compiling out-of-tree modules, put MODVERDIR in the module
> -# tree rather than in the kernel tree. The kernel tree might
> -# even be read-only.
> -export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
> -
> # Files to ignore in find ... statements
>
> export RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o \
> @@ -1033,7 +1028,7 @@ vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)
>
> # Recurse until adjust_autoksyms.sh is satisfied
> PHONY += autoksyms_recursive
> -autoksyms_recursive: $(vmlinux-deps)
> +autoksyms_recursive: $(vmlinux-deps) modules.order
> ifdef CONFIG_TRIM_UNUSED_KSYMS
> $(Q)$(CONFIG_SHELL) $(srctree)/scripts/adjust_autoksyms.sh \
> "$(MAKE) -f $(srctree)/Makefile vmlinux"
> @@ -1117,7 +1112,6 @@ endif
>
> prepare1: prepare3 outputmakefile asm-generic $(version_h) $(autoksyms_h) \
> include/generated/utsrelease.h
> - $(cmd_crmodverdir)
>
> archprepare: archheaders archscripts prepare1 scripts
>
> @@ -1375,7 +1369,7 @@ endif # CONFIG_MODULES
> # make distclean Remove editor backup files, patch leftover files and the like
>
> # Directories & files removed with 'make clean'
> -CLEAN_DIRS += $(MODVERDIR) include/ksym
> +CLEAN_DIRS += include/ksym
> CLEAN_FILES += modules.builtin.modinfo
>
> # Directories & files removed with 'make mrproper'
> @@ -1636,7 +1630,6 @@ PHONY += $(clean-dirs) clean
> $(clean-dirs):
> $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
>
> -clean: rm-dirs := $(MODVERDIR)
> clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
>
> PHONY += help
> @@ -1650,8 +1643,6 @@ help:
> @echo ''
>
> PHONY += prepare
> -prepare:
> - $(cmd_crmodverdir)
> endif # KBUILD_EXTMOD
>
> clean: $(clean-dirs)
> @@ -1662,7 +1653,7 @@ clean: $(clean-dirs)
> -o -name '*.ko.*' \
> -o -name '*.dtb' -o -name '*.dtb.S' -o -name '*.dt.yaml' \
> -o -name '*.dwo' -o -name '*.lst' \
> - -o -name '*.su' \
> + -o -name '*.su' -o -name '*.mod' \
> -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
> -o -name '*.lex.c' -o -name '*.tab.[ch]' \
> -o -name '*.asn1.[ch]' \
> @@ -1791,11 +1782,6 @@ quiet_cmd_depmod = DEPMOD $(KERNELRELEASE)
> cmd_depmod = $(CONFIG_SHELL) $(srctree)/scripts/depmod.sh $(DEPMOD) \
> $(KERNELRELEASE)
>
> -# Create temporary dir for module support files
> -# clean it up only when building all modules
> -cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
> - $(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
> -
> # read saved command lines for existing targets
> existing-targets := $(wildcard $(sort $(targets)))
>
> diff --git a/scripts/Makefile.build b/scripts/Makefile.build
> index 98dede0b2ca8..9fb30633acd2 100644
> --- a/scripts/Makefile.build
> +++ b/scripts/Makefile.build
> @@ -67,8 +67,6 @@ ifeq ($(CONFIG_MODULES)$(need-modorder),y1)
> modorder-target := $(obj)/modules.order
> endif
>
> -# We keep a list of all modules in $(MODVERDIR)
> -
> __build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
> $(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
> $(subdir-ym) $(always)
> @@ -278,13 +276,11 @@ $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
> $(call cmd,force_checksrc)
> $(call if_changed_rule,cc_o_c)
>
> -# Single-part modules are special since we need to mark them in $(MODVERDIR)
> -
> $(single-used-m): $(obj)/%.o: $(src)/%.c $(recordmcount_source) $(objtool_dep) FORCE
> $(call cmd,force_checksrc)
> $(call if_changed_rule,cc_o_c)
> @{ echo $(@:.o=.ko); echo $@; \
> - $(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
> + $(cmd_undef_syms); } > $(patsubst %.o,%.mod,$@)
>
> quiet_cmd_cc_lst_c = MKLST $@
> cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
> @@ -466,7 +462,7 @@ cmd_link_multi-m = $(LD) $(ld_flags) -r -o $@ $(filter %.o,$^) $(cmd_secanalysis
> $(multi-used-m): FORCE
> $(call if_changed,link_multi-m)
> @{ echo $(@:.o=.ko); echo $(filter %.o,$^); \
> - $(cmd_undef_syms); } > $(MODVERDIR)/$(@F:.o=.mod)
> + $(cmd_undef_syms); } > $(patsubst %.o,%.mod,$@)
> $(call multi_depend, $(multi-used-m), .o, -objs -y -m)
>
> targets += $(multi-used-m)
> diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
> index 2ab1694a7df3..3e229d4f4d72 100644
> --- a/scripts/Makefile.modpost
> +++ b/scripts/Makefile.modpost
> @@ -6,8 +6,8 @@
> # Stage one of module building created the following:
> # a) The individual .o files used for the module
> # b) A <module>.o file which is the .o files above linked together
> -# c) A <module>.mod file in $(MODVERDIR)/, listing the name of the
> -# the preliminary <module>.o file, plus all .o files
> +# c) A <module>.mod file, listing the name of the preliminary <module>.o file,
> +# plus all .o files
> # d) modules.order, which lists all the modules
>
> # Stage 2 is handled by this file and does the following
> diff --git a/scripts/adjust_autoksyms.sh b/scripts/adjust_autoksyms.sh
> index aab4e299d7a2..8b44bb80a451 100755
> --- a/scripts/adjust_autoksyms.sh
> +++ b/scripts/adjust_autoksyms.sh
> @@ -47,13 +47,10 @@ cat > "$new_ksyms_file" << EOT
> */
>
> EOT
> -[ "$(ls -A "$MODVERDIR")" ] &&
> -for mod in "$MODVERDIR"/*.mod; do
> - sed -n -e '3{s/ /\n/g;/^$/!p;}' "$mod"
> -done | sort -u |
> -while read sym; do
> - echo "#define __KSYM_${sym} 1"
> -done >> "$new_ksyms_file"
> +sed 's/ko$/mod/' modules.order |
> +xargs -n1 sed -n -e '3{s/ /\n/g;/^$/!p;}' -- |
> +sort -u |
> +sed -e 's/\(.*\)/#define __KSYM_\1 1/' >> "$new_ksyms_file"
>
> # Special case for modversions (see modpost.c)
> if [ -n "$CONFIG_MODVERSIONS" ]; then
> diff --git a/scripts/mod/sumversion.c b/scripts/mod/sumversion.c
> index 0f6dcb4011a8..166f3fa247a9 100644
> --- a/scripts/mod/sumversion.c
> +++ b/scripts/mod/sumversion.c
> @@ -396,21 +396,11 @@ void get_src_version(const char *modname, char sum[], unsigned sumlen)
> unsigned long len;
> struct md4_ctx md;
> char *sources, *end, *fname;
> - const char *basename;
> char filelist[PATH_MAX + 1];
> - char *modverdir = getenv("MODVERDIR");
>
> - if (!modverdir)
> - modverdir = ".";
> -
> - /* Source files for module are in .tmp_versions/modname.mod,
> - after the first line. */
> - if (strrchr(modname, '/'))
> - basename = strrchr(modname, '/') + 1;
> - else
> - basename = modname;
> - snprintf(filelist, sizeof(filelist), "%s/%.*s.mod", modverdir,
> - (int) strlen(basename) - 2, basename);
> + /* objects for a module are listed in the second line of *.mod file. */
> + snprintf(filelist, sizeof(filelist), "%.*smod",
> + (int)strlen(modname) - 1, modname);
>
> file = grab_file(filelist, &len);
> if (!file)
> diff --git a/scripts/package/mkspec b/scripts/package/mkspec
> index 2d29df4a0a53..8640c278f1aa 100755
> --- a/scripts/package/mkspec
> +++ b/scripts/package/mkspec
> @@ -29,7 +29,7 @@ fi
>
> PROVIDES="$PROVIDES kernel-$KERNELRELEASE"
> __KERNELRELEASE=$(echo $KERNELRELEASE | sed -e "s/-/_/g")
> -EXCLUDES="$RCS_TAR_IGNORE --exclude=.tmp_versions --exclude=*vmlinux* \
> +EXCLUDES="$RCS_TAR_IGNORE --exclude=*vmlinux* --exclude=*.mod \
> --exclude=*.o --exclude=*.ko --exclude=*.cmd --exclude=Documentation \
> --exclude=.config.old --exclude=.missing-syscalls.d --exclude=*.s"
>
> --
> 2.17.1
>
Hi Masahiro,
I'm following this patchset changes as they will affect the klp-convert
series [1] that the livepatching folks have been working on...
Just wondering if these other files should be checked for more MODVERDIR
fallout:
% grep -R 'tmp_versions'
tools/power/cpupower/debug/kernel/Makefile: - rm -rf .tmp_versions* Module.symvers modules.order
scripts/export_report.pl: while (<.tmp_versions/*.mod>) {
scripts/adjust_autoksyms.sh:# .tmp_versions/*.mod files.
export_report.pl is probably the only interesting one on this list.
Also, can you cc me on subsequent patchset versions?
Thanks,
-- Joe
[1] https://lore.kernel.org/lkml/[email protected]/
Hi Joe
On Wed, Jul 17, 2019 at 6:40 AM Joe Lawrence <[email protected]> wrote:
>
> On Thu, Jul 11, 2019 at 02:44:31PM +0900, Masahiro Yamada wrote:
> > While descending directories, Kbuild produces objects for modules,
> > but do not link final *.ko files; it is done in the modpost.
> >
> > To keep track of modules, Kbuild creates a *.mod file in $(MODVERDIR)
> > for every module it is building. Some post-processing steps read the
> > necessary information from *.mod files. This avoids descending into
> > directories again. This mechanism was introduced in 2003 or so.
> >
> > Later, commit 551559e13af1 ("kbuild: implement modules.order") added
> > modules.order. So, we can simply read it out to know all the modules
> > with directory paths. This is easier than parsing the first line of
> > *.mod files.
> >
> > $(MODVERDIR) has a flat directory structure, that is, *.mod files
> > are named only with base names. This is based on the assumption that
> > the module name is unique across the tree. This assumption is really
> > fragile.
> >
> > Stephen Rothwell reported a race condition caused by a module name
> > conflict:
> >
> > https://lkml.org/lkml/2019/5/13/991
> >
> > In parallel building, two different threads could write to the same
> > $(MODVERDIR)/*.mod simultaneously.
> >
> > Non-unique module names are the source of all kind of troubles, hence
> > commit 3a48a91901c5 ("kbuild: check uniqueness of module names")
> > introduced a new checker script.
> >
> > However, it is still fragile in the build system point of view because
> > this race happens before scripts/modules-check.sh is invoked. If it
> > happens again, the modpost will emit unclear error messages.
> >
> > To fix this issue completely, create *.mod in the same directory as
> > *.ko so that two threads never attempt to write to the same file.
> > $(MODVERDIR) is no longer needed.
> >
> > Since modules with directory paths are listed in modules.order, Kbuild
> > is still able to find *.mod files without additional descending.
> >
> > Signed-off-by: Masahiro Yamada <[email protected]>
> > Acked-by: Nicolas Pitre <[email protected]>
> >
>
> Hi Masahiro,
>
> I'm following this patchset changes as they will affect the klp-convert
> series [1] that the livepatching folks have been working on...
Empty files .tmp_versions/*.livepatch are touched
to keep track of 'LIVEPATCH_* := y', right?
Perhaps, adding a new field
to *.mod files might be cleaner.
> Just wondering if these other files should be checked for more MODVERDIR
> fallout:
>
> % grep -R 'tmp_versions'
> tools/power/cpupower/debug/kernel/Makefile: - rm -rf .tmp_versions* Module.symvers modules.order
> scripts/export_report.pl: while (<.tmp_versions/*.mod>) {
> scripts/adjust_autoksyms.sh:# .tmp_versions/*.mod files.
>
> export_report.pl is probably the only interesting one on this list.
Good catch. I will fix it.
> Also, can you cc me on subsequent patchset versions?
Yes, will do.
--
Best Regards
Masahiro Yamada
On 7/17/19 1:21 AM, Masahiro Yamada wrote:
>> Hi Masahiro,
>>
>> I'm following this patchset changes as they will affect the klp-convert
>> series [1] that the livepatching folks have been working on...
>
> Empty files .tmp_versions/*.livepatch are touched
> to keep track of 'LIVEPATCH_* := y', right?
>
Pretty much. From that patchset I think the rework would need to modify..
- [PATCH v4 02/10] kbuild: Support for Symbols.list creation: creates a
Symbols.list file of kernel and module symbols, but *not* including any
from LIVEPATCH_* modules.
- [PATCH v4 05/10] modpost: Integrate klp-convert: if a LIVEPATCH_*
module has changed, call a newly introduced klp-convert script on it.
- [PATCH v4 06/10] modpost: Add modinfo flag to livepatch modules: find
any LIVEPATCH_* mod, add it to a livepatchmods file, then pass that file
to modpost
> Perhaps, adding a new field
> to *.mod files might be cleaner.
I can look into that. By "field" you mean a new row in the file?
Regards,
-- Joe
Hi Joe,
On Fri, Jul 19, 2019 at 5:18 AM Joe Lawrence <[email protected]> wrote:
> > Perhaps, adding a new field
> > to *.mod files might be cleaner.
>
> I can look into that. By "field" you mean a new row in the file?
Yes.
--
Best Regards
Masahiro Yamada