2019-07-15 12:05:29

by Kamil Konieczny

Subject: [PATCH v2 4/4] dt-bindings: devfreq: exynos-bus: remove unused property

Remove unused DT property "exynos,voltage-tolerance".

Signed-off-by: Kamil Konieczny <[email protected]>
---
Documentation/devicetree/bindings/devfreq/exynos-bus.txt | 2 --
1 file changed, 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
index f8e946471a58..e71f752cc18f 100644
--- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
+++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
@@ -50,8 +50,6 @@ Required properties only for passive bus device:
Optional properties only for parent bus device:
- exynos,saturation-ratio: the percentage value which is used to calibrate
the performance count against total cycle count.
-- exynos,voltage-tolerance: the percentage value for bus voltage tolerance
- which is used to calculate the max voltage.

Detailed correlation between sub-blocks and power line according to Exynos SoC:
- In case of Exynos3250, there are two power line as following:
--
2.22.0

2019-07-16 08:52:06

by Chanwoo Choi

Subject: Re: [PATCH v2 4/4] dt-bindings: devfreq: exynos-bus: remove unused property

Hi,

On 19. 7. 15. 오후 9:04, Kamil Konieczny wrote:
> Remove unused DT property "exynos,voltage-tolerance".
>
> Signed-off-by: Kamil Konieczny <[email protected]>
> ---
> Documentation/devicetree/bindings/devfreq/exynos-bus.txt | 2 --
> 1 file changed, 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
> index f8e946471a58..e71f752cc18f 100644
> --- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
> +++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
> @@ -50,8 +50,6 @@ Required properties only for passive bus device:
> Optional properties only for parent bus device:
> - exynos,saturation-ratio: the percentage value which is used to calibrate
> the performance count against total cycle count.
> -- exynos,voltage-tolerance: the percentage value for bus voltage tolerance
> - which is used to calculate the max voltage.
>
> Detailed correlation between sub-blocks and power line according to Exynos SoC:
> - In case of Exynos3250, there are two power line as following:
>

Acked-by: Chanwoo Choi <[email protected]>

--
Best Regards,
Chanwoo Choi
Samsung Electronics