If VDDA != VDDIO and any of them is greater than 3.1V, charge pump
source can be assigned automatically [1].
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Signed-off-by: Oleksandr Suvorov <[email protected]>
Reviewed-by: Marcel Ziswiler <[email protected]>
Reviewed-by: Igor Opaniuk <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
---
Changes in v5: None
Changes in v4: None
Changes in v3:
- Add the reference to NXP SGTL5000 data sheet to commit message
- Fix multi-line comment format
Changes in v2:
- Fix patch formatting
sound/soc/codecs/sgtl5000.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)
diff --git a/sound/soc/codecs/sgtl5000.c b/sound/soc/codecs/sgtl5000.c
index 31d546abde717..a04cba66615de 100644
--- a/sound/soc/codecs/sgtl5000.c
+++ b/sound/soc/codecs/sgtl5000.c
@@ -1328,12 +1328,17 @@ static int sgtl5000_set_power_regs(struct snd_soc_component *component)
SGTL5000_INT_OSC_EN);
/* Enable VDDC charge pump */
ana_pwr |= SGTL5000_VDDC_CHRGPMP_POWERUP;
- } else if (vddio >= 3100 && vdda >= 3100) {
+ } else {
ana_pwr &= ~SGTL5000_VDDC_CHRGPMP_POWERUP;
- /* VDDC use VDDIO rail */
- lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
- lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
- SGTL5000_VDDC_MAN_ASSN_SHIFT;
+ /*
+ * if vddio == vdda the source of charge pump should be
+ * assigned manually to VDDIO
+ */
+ if (vddio == vdda) {
+ lreg_ctrl |= SGTL5000_VDDC_ASSN_OVRD;
+ lreg_ctrl |= SGTL5000_VDDC_MAN_ASSN_VDDIO <<
+ SGTL5000_VDDC_MAN_ASSN_SHIFT;
+ }
}
snd_soc_component_write(component, SGTL5000_CHIP_LINREG_CTRL, lreg_ctrl);
--
2.20.1