From: Anson Huang <[email protected]>
GIC is inside of SoC from architecture perspective, it should
be located inside of soc node in DT.
Signed-off-by: Anson Huang <[email protected]>
---
arch/arm/boot/dts/imx6ul.dtsi | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 81d4b49..da1eae6 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -93,18 +93,6 @@
};
};
- intc: interrupt-controller@a01000 {
- compatible = "arm,gic-400", "arm,cortex-a7-gic";
- interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
- #interrupt-cells = <3>;
- interrupt-controller;
- interrupt-parent = <&intc>;
- reg = <0x00a01000 0x1000>,
- <0x00a02000 0x2000>,
- <0x00a04000 0x2000>,
- <0x00a06000 0x2000>;
- };
-
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
@@ -171,6 +159,18 @@
reg = <0x00900000 0x20000>;
};
+ intc: interrupt-controller@a01000 {
+ compatible = "arm,gic-400", "arm,cortex-a7-gic";
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupt-parent = <&intc>;
+ reg = <0x00a01000 0x1000>,
+ <0x00a02000 0x2000>,
+ <0x00a04000 0x2000>,
+ <0x00a06000 0x2000>;
+ };
+
dma_apbh: dma-apbh@1804000 {
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
reg = <0x01804000 0x2000>;
--
2.7.4