2019-07-19 11:21:02

by Vitor Soares

[permalink] [raw]
Subject: [PATCH v5 0/2] Add ST lsm6dso i3c support

This patch-series add i3c support for STM LSM6DSO and LSM6DSR sensors.

It is also introduced i3c support on regmap API. Due to the lack of
i3c devices with HDR feature on the market the support, for now, is only
for i3c SDR mode by using i3c_device_do_priv_xfers() method.

The i3c regmap API is already available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git
tags/regmap-i3c

Change in v5:
Remove regmap-i3c patch, already applied in regmap tree
Fix warning when compiling in 64-bit architecture

Change in v4:
remover hw_id variable from st_lsm6dsx_i3c_probe()

Change in v3:
Update st_lsm6dsx_probe() call
Remove i3c_get_device_id() and use i3c_device_match_id()

Changes in v2:
Change i3c_get_device_id() to drivers/i3c/device.c
Add support for LSM6DSR

Vitor Soares (2):
i3c: add i3c_get_device_id helper
iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR

drivers/i3c/device.c | 53 +++++++++++++++++++++++++++
drivers/i3c/master.c | 45 -----------------------
drivers/iio/imu/st_lsm6dsx/Kconfig | 8 +++-
drivers/iio/imu/st_lsm6dsx/Makefile | 1 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 57 +++++++++++++++++++++++++++++
include/linux/i3c/device.h | 4 ++
6 files changed, 122 insertions(+), 46 deletions(-)
create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c

--
2.7.4


2019-07-19 11:21:39

by Vitor Soares

[permalink] [raw]
Subject: [PATCH v5 2/2] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR

For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in
spi and i2c mode.

The LSM6DSO and LSM6DSR are also i3c capable so let's give i3c support to
them.

Signed-off-by: Vitor Soares <[email protected]>
Acked-by: Lorenzo Bianconi <[email protected]>
---
Changes in v5:
Move regmap_config declaration inside st_lsm6dsx_i3c_probe()
Fix warning [-Wint-to-void-pointer-cast] when compiling in 64-bit arch

Changes in v4:
Remove hw_id variable

Changes in v3:
Remove unnecessary st_lsm6dsx_i3c_data table used to hold device name
Use st_lsm6dsx_probe new form

Changes in v2:
Add support for LSM6DSR
Set pm_ops to st_lsm6dsx_pm_ops

drivers/iio/imu/st_lsm6dsx/Kconfig | 8 +++-
drivers/iio/imu/st_lsm6dsx/Makefile | 1 +
drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 57 +++++++++++++++++++++++++++++
3 files changed, 65 insertions(+), 1 deletion(-)
create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c

diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
index 9e59297..6b5a73c 100644
--- a/drivers/iio/imu/st_lsm6dsx/Kconfig
+++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
@@ -1,11 +1,12 @@

config IIO_ST_LSM6DSX
tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors"
- depends on (I2C || SPI)
+ depends on (I2C || SPI || I3C)
select IIO_BUFFER
select IIO_KFIFO_BUF
select IIO_ST_LSM6DSX_I2C if (I2C)
select IIO_ST_LSM6DSX_SPI if (SPI_MASTER)
+ select IIO_ST_LSM6DSX_I3C if (I3C)
help
Say yes here to build support for STMicroelectronics LSM6DSx imu
sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
@@ -23,3 +24,8 @@ config IIO_ST_LSM6DSX_SPI
tristate
depends on IIO_ST_LSM6DSX
select REGMAP_SPI
+
+config IIO_ST_LSM6DSX_I3C
+ tristate
+ depends on IIO_ST_LSM6DSX
+ select REGMAP_I3C
diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile
index e5f733c..c676965 100644
--- a/drivers/iio/imu/st_lsm6dsx/Makefile
+++ b/drivers/iio/imu/st_lsm6dsx/Makefile
@@ -4,3 +4,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \
obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o
obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o
obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o
+obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
new file mode 100644
index 0000000..57e6331
--- /dev/null
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
+ *
+ * Author: Vitor Soares <[email protected]>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i3c/device.h>
+#include <linux/i3c/master.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include "st_lsm6dsx.h"
+
+static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = {
+ I3C_DEVICE(0x0104, 0x006C, (void *)ST_LSM6DSO_ID),
+ I3C_DEVICE(0x0104, 0x006B, (void *)ST_LSM6DSR_ID),
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids);
+
+static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev)
+{
+ struct regmap_config st_lsm6dsx_i3c_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ };
+ const struct i3c_device_id *id = i3c_device_match_id(i3cdev,
+ st_lsm6dsx_i3c_ids);
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n",
+ (int)PTR_ERR(regmap));
+ return PTR_ERR(regmap);
+ }
+
+ return st_lsm6dsx_probe(&i3cdev->dev, 0, (uintptr_t)id->data, regmap);
+}
+
+static struct i3c_driver st_lsm6dsx_driver = {
+ .driver = {
+ .name = "st_lsm6dsx_i3c",
+ .pm = &st_lsm6dsx_pm_ops,
+ },
+ .probe = st_lsm6dsx_i3c_probe,
+ .id_table = st_lsm6dsx_i3c_ids,
+};
+module_i3c_driver(st_lsm6dsx_driver);
+
+MODULE_AUTHOR("Vitor Soares <[email protected]>");
+MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4

2019-07-19 11:21:51

by Vitor Soares

[permalink] [raw]
Subject: [PATCH v5 1/2] i3c: move i3c_device_match_id to device.c and export it

Some I3C device drivers need to know which entry matches the
i3c_device object passed to the probe function

Let's move i3c_device_match_id() to device.c and export it so it can be
used by drivers.

Signed-off-by: Vitor Soares <[email protected]>
---
Changes in v5:
Add kerneldoc
Improve commit message

Changes in v4:
None

Changes in v3:
Remove i3c_get_device_id
Move i3c_device_match_id from drivers/i3c/master.c to drivers/i3c/device.c
Export i3c_device_match_id

Changes in v2:
move this function to drivers/i3c/device.c

drivers/i3c/device.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/i3c/master.c | 45 ---------------------------------------
include/linux/i3c/device.h | 4 ++++
3 files changed, 57 insertions(+), 45 deletions(-)

diff --git a/drivers/i3c/device.c b/drivers/i3c/device.c
index 69cc040..5349059 100644
--- a/drivers/i3c/device.c
+++ b/drivers/i3c/device.c
@@ -201,6 +201,59 @@ struct i3c_device *dev_to_i3cdev(struct device *dev)
EXPORT_SYMBOL_GPL(dev_to_i3cdev);

/**
+ * i3c_device_match_id() - Returns the I3C device match id in @i3cdev
+ * @i3cdev: I3C device
+ * @id_table: I3C device match table
+ *
+ * Return: a pointer to I3C device id object.
+ */
+const struct i3c_device_id *
+i3c_device_match_id(struct i3c_device *i3cdev,
+ const struct i3c_device_id *id_table)
+{
+ struct i3c_device_info devinfo;
+ const struct i3c_device_id *id;
+
+ i3c_device_get_info(i3cdev, &devinfo);
+
+ /*
+ * The lower 32bits of the provisional ID is just filled with a random
+ * value, try to match using DCR info.
+ */
+ if (!I3C_PID_RND_LOWER_32BITS(devinfo.pid)) {
+ u16 manuf = I3C_PID_MANUF_ID(devinfo.pid);
+ u16 part = I3C_PID_PART_ID(devinfo.pid);
+ u16 ext_info = I3C_PID_EXTRA_INFO(devinfo.pid);
+
+ /* First try to match by manufacturer/part ID. */
+ for (id = id_table; id->match_flags != 0; id++) {
+ if ((id->match_flags & I3C_MATCH_MANUF_AND_PART) !=
+ I3C_MATCH_MANUF_AND_PART)
+ continue;
+
+ if (manuf != id->manuf_id || part != id->part_id)
+ continue;
+
+ if ((id->match_flags & I3C_MATCH_EXTRA_INFO) &&
+ ext_info != id->extra_info)
+ continue;
+
+ return id;
+ }
+ }
+
+ /* Fallback to DCR match. */
+ for (id = id_table; id->match_flags != 0; id++) {
+ if ((id->match_flags & I3C_MATCH_DCR) &&
+ id->dcr == devinfo.dcr)
+ return id;
+ }
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(i3c_device_match_id);
+
+/**
* i3c_driver_register_with_owner() - register an I3C device driver
*
* @drv: driver to register
diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
index 5f4bd52..7667f84 100644
--- a/drivers/i3c/master.c
+++ b/drivers/i3c/master.c
@@ -270,51 +270,6 @@ static const struct device_type i3c_device_type = {
.uevent = i3c_device_uevent,
};

-static const struct i3c_device_id *
-i3c_device_match_id(struct i3c_device *i3cdev,
- const struct i3c_device_id *id_table)
-{
- struct i3c_device_info devinfo;
- const struct i3c_device_id *id;
-
- i3c_device_get_info(i3cdev, &devinfo);
-
- /*
- * The lower 32bits of the provisional ID is just filled with a random
- * value, try to match using DCR info.
- */
- if (!I3C_PID_RND_LOWER_32BITS(devinfo.pid)) {
- u16 manuf = I3C_PID_MANUF_ID(devinfo.pid);
- u16 part = I3C_PID_PART_ID(devinfo.pid);
- u16 ext_info = I3C_PID_EXTRA_INFO(devinfo.pid);
-
- /* First try to match by manufacturer/part ID. */
- for (id = id_table; id->match_flags != 0; id++) {
- if ((id->match_flags & I3C_MATCH_MANUF_AND_PART) !=
- I3C_MATCH_MANUF_AND_PART)
- continue;
-
- if (manuf != id->manuf_id || part != id->part_id)
- continue;
-
- if ((id->match_flags & I3C_MATCH_EXTRA_INFO) &&
- ext_info != id->extra_info)
- continue;
-
- return id;
- }
- }
-
- /* Fallback to DCR match. */
- for (id = id_table; id->match_flags != 0; id++) {
- if ((id->match_flags & I3C_MATCH_DCR) &&
- id->dcr == devinfo.dcr)
- return id;
- }
-
- return NULL;
-}
-
static int i3c_device_match(struct device *dev, struct device_driver *drv)
{
struct i3c_device *i3cdev;
diff --git a/include/linux/i3c/device.h b/include/linux/i3c/device.h
index 5ecb055..de102e4 100644
--- a/include/linux/i3c/device.h
+++ b/include/linux/i3c/device.h
@@ -188,6 +188,10 @@ static inline struct i3c_driver *drv_to_i3cdrv(struct device_driver *drv)
struct device *i3cdev_to_dev(struct i3c_device *i3cdev);
struct i3c_device *dev_to_i3cdev(struct device *dev);

+const struct i3c_device_id *
+i3c_device_match_id(struct i3c_device *i3cdev,
+ const struct i3c_device_id *id_table);
+
static inline void i3cdev_set_drvdata(struct i3c_device *i3cdev,
void *data)
{
--
2.7.4

2019-07-19 13:34:12

by Boris Brezillon

[permalink] [raw]
Subject: Re: [PATCH v5 1/2] i3c: move i3c_device_match_id to device.c and export it

On Fri, 19 Jul 2019 13:19:04 +0200
Vitor Soares <[email protected]> wrote:

> Some I3C device drivers need to know which entry matches the
> i3c_device object passed to the probe function
>
> Let's move i3c_device_match_id() to device.c and export it so it can be
> used by drivers.
>
> Signed-off-by: Vitor Soares <[email protected]>
> ---
> Changes in v5:
> Add kerneldoc
> Improve commit message
>
> Changes in v4:
> None
>
> Changes in v3:
> Remove i3c_get_device_id
> Move i3c_device_match_id from drivers/i3c/master.c to drivers/i3c/device.c
> Export i3c_device_match_id
>
> Changes in v2:
> move this function to drivers/i3c/device.c
>
> drivers/i3c/device.c | 53 ++++++++++++++++++++++++++++++++++++++++++++++
> drivers/i3c/master.c | 45 ---------------------------------------
> include/linux/i3c/device.h | 4 ++++
> 3 files changed, 57 insertions(+), 45 deletions(-)
>
> diff --git a/drivers/i3c/device.c b/drivers/i3c/device.c
> index 69cc040..5349059 100644
> --- a/drivers/i3c/device.c
> +++ b/drivers/i3c/device.c
> @@ -201,6 +201,59 @@ struct i3c_device *dev_to_i3cdev(struct device *dev)
> EXPORT_SYMBOL_GPL(dev_to_i3cdev);
>
> /**
> + * i3c_device_match_id() - Returns the I3C device match id in @i3cdev

Returns the i3c_device_id entry matching
@i3cdev

> + * @i3cdev: I3C device
> + * @id_table: I3C device match table
> + *
> + * Return: a pointer to I3C device id object
an i3c_device_id object or NULL if there's
no match.

> + */
> +const struct i3c_device_id *
> +i3c_device_match_id(struct i3c_device *i3cdev,
> + const struct i3c_device_id *id_table)
> +{
> + struct i3c_device_info devinfo;
> + const struct i3c_device_id *id;
> +
> + i3c_device_get_info(i3cdev, &devinfo);
> +
> + /*
> + * The lower 32bits of the provisional ID is just filled with a random
> + * value, try to match using DCR info.
> + */
> + if (!I3C_PID_RND_LOWER_32BITS(devinfo.pid)) {
> + u16 manuf = I3C_PID_MANUF_ID(devinfo.pid);
> + u16 part = I3C_PID_PART_ID(devinfo.pid);
> + u16 ext_info = I3C_PID_EXTRA_INFO(devinfo.pid);
> +
> + /* First try to match by manufacturer/part ID. */
> + for (id = id_table; id->match_flags != 0; id++) {
> + if ((id->match_flags & I3C_MATCH_MANUF_AND_PART) !=
> + I3C_MATCH_MANUF_AND_PART)
> + continue;
> +
> + if (manuf != id->manuf_id || part != id->part_id)
> + continue;
> +
> + if ((id->match_flags & I3C_MATCH_EXTRA_INFO) &&
> + ext_info != id->extra_info)
> + continue;
> +
> + return id;
> + }
> + }
> +
> + /* Fallback to DCR match. */
> + for (id = id_table; id->match_flags != 0; id++) {
> + if ((id->match_flags & I3C_MATCH_DCR) &&
> + id->dcr == devinfo.dcr)
> + return id;
> + }
> +
> + return NULL;
> +}
> +EXPORT_SYMBOL_GPL(i3c_device_match_id);
> +
> +/**
> * i3c_driver_register_with_owner() - register an I3C device driver
> *
> * @drv: driver to register
> diff --git a/drivers/i3c/master.c b/drivers/i3c/master.c
> index 5f4bd52..7667f84 100644
> --- a/drivers/i3c/master.c
> +++ b/drivers/i3c/master.c
> @@ -270,51 +270,6 @@ static const struct device_type i3c_device_type = {
> .uevent = i3c_device_uevent,
> };
>
> -static const struct i3c_device_id *
> -i3c_device_match_id(struct i3c_device *i3cdev,
> - const struct i3c_device_id *id_table)
> -{
> - struct i3c_device_info devinfo;
> - const struct i3c_device_id *id;
> -
> - i3c_device_get_info(i3cdev, &devinfo);
> -
> - /*
> - * The lower 32bits of the provisional ID is just filled with a random
> - * value, try to match using DCR info.
> - */
> - if (!I3C_PID_RND_LOWER_32BITS(devinfo.pid)) {
> - u16 manuf = I3C_PID_MANUF_ID(devinfo.pid);
> - u16 part = I3C_PID_PART_ID(devinfo.pid);
> - u16 ext_info = I3C_PID_EXTRA_INFO(devinfo.pid);
> -
> - /* First try to match by manufacturer/part ID. */
> - for (id = id_table; id->match_flags != 0; id++) {
> - if ((id->match_flags & I3C_MATCH_MANUF_AND_PART) !=
> - I3C_MATCH_MANUF_AND_PART)
> - continue;
> -
> - if (manuf != id->manuf_id || part != id->part_id)
> - continue;
> -
> - if ((id->match_flags & I3C_MATCH_EXTRA_INFO) &&
> - ext_info != id->extra_info)
> - continue;
> -
> - return id;
> - }
> - }
> -
> - /* Fallback to DCR match. */
> - for (id = id_table; id->match_flags != 0; id++) {
> - if ((id->match_flags & I3C_MATCH_DCR) &&
> - id->dcr == devinfo.dcr)
> - return id;
> - }
> -
> - return NULL;
> -}
> -
> static int i3c_device_match(struct device *dev, struct device_driver *drv)
> {
> struct i3c_device *i3cdev;
> diff --git a/include/linux/i3c/device.h b/include/linux/i3c/device.h
> index 5ecb055..de102e4 100644
> --- a/include/linux/i3c/device.h
> +++ b/include/linux/i3c/device.h
> @@ -188,6 +188,10 @@ static inline struct i3c_driver *drv_to_i3cdrv(struct device_driver *drv)
> struct device *i3cdev_to_dev(struct i3c_device *i3cdev);
> struct i3c_device *dev_to_i3cdev(struct device *dev);
>
> +const struct i3c_device_id *
> +i3c_device_match_id(struct i3c_device *i3cdev,
> + const struct i3c_device_id *id_table);
> +
> static inline void i3cdev_set_drvdata(struct i3c_device *i3cdev,
> void *data)
> {

2019-07-19 15:07:09

by Boris Brezillon

[permalink] [raw]
Subject: Re: [PATCH v5 2/2] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR

On Fri, 19 Jul 2019 13:19:05 +0200
Vitor Soares <[email protected]> wrote:

> For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in
> spi and i2c mode.
>
> The LSM6DSO and LSM6DSR are also i3c capable so let's give i3c support to
> them.
>
> Signed-off-by: Vitor Soares <[email protected]>
> Acked-by: Lorenzo Bianconi <[email protected]>

Reviewed-by: Boris Brezillon <[email protected]>

> ---
> Changes in v5:
> Move regmap_config declaration inside st_lsm6dsx_i3c_probe()
> Fix warning [-Wint-to-void-pointer-cast] when compiling in 64-bit arch
>
> Changes in v4:
> Remove hw_id variable
>
> Changes in v3:
> Remove unnecessary st_lsm6dsx_i3c_data table used to hold device name
> Use st_lsm6dsx_probe new form
>
> Changes in v2:
> Add support for LSM6DSR
> Set pm_ops to st_lsm6dsx_pm_ops
>
> drivers/iio/imu/st_lsm6dsx/Kconfig | 8 +++-
> drivers/iio/imu/st_lsm6dsx/Makefile | 1 +
> drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 57 +++++++++++++++++++++++++++++
> 3 files changed, 65 insertions(+), 1 deletion(-)
> create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
>
> diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
> index 9e59297..6b5a73c 100644
> --- a/drivers/iio/imu/st_lsm6dsx/Kconfig
> +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
> @@ -1,11 +1,12 @@
>
> config IIO_ST_LSM6DSX
> tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors"
> - depends on (I2C || SPI)
> + depends on (I2C || SPI || I3C)
> select IIO_BUFFER
> select IIO_KFIFO_BUF
> select IIO_ST_LSM6DSX_I2C if (I2C)
> select IIO_ST_LSM6DSX_SPI if (SPI_MASTER)
> + select IIO_ST_LSM6DSX_I3C if (I3C)
> help
> Say yes here to build support for STMicroelectronics LSM6DSx imu
> sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
> @@ -23,3 +24,8 @@ config IIO_ST_LSM6DSX_SPI
> tristate
> depends on IIO_ST_LSM6DSX
> select REGMAP_SPI
> +
> +config IIO_ST_LSM6DSX_I3C
> + tristate
> + depends on IIO_ST_LSM6DSX
> + select REGMAP_I3C
> diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile
> index e5f733c..c676965 100644
> --- a/drivers/iio/imu/st_lsm6dsx/Makefile
> +++ b/drivers/iio/imu/st_lsm6dsx/Makefile
> @@ -4,3 +4,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \
> obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o
> obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o
> obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o
> +obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o
> diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> new file mode 100644
> index 0000000..57e6331
> --- /dev/null
> +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> @@ -0,0 +1,57 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
> + *
> + * Author: Vitor Soares <[email protected]>
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/i3c/device.h>
> +#include <linux/i3c/master.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/regmap.h>
> +
> +#include "st_lsm6dsx.h"
> +
> +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = {
> + I3C_DEVICE(0x0104, 0x006C, (void *)ST_LSM6DSO_ID),
> + I3C_DEVICE(0x0104, 0x006B, (void *)ST_LSM6DSR_ID),
> + { /* sentinel */ },
> +};
> +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids);
> +
> +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev)
> +{
> + struct regmap_config st_lsm6dsx_i3c_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + };
> + const struct i3c_device_id *id = i3c_device_match_id(i3cdev,
> + st_lsm6dsx_i3c_ids);
> + struct regmap *regmap;
> +
> + regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config);
> + if (IS_ERR(regmap)) {
> + dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n",
> + (int)PTR_ERR(regmap));
> + return PTR_ERR(regmap);
> + }
> +
> + return st_lsm6dsx_probe(&i3cdev->dev, 0, (uintptr_t)id->data, regmap);
> +}
> +
> +static struct i3c_driver st_lsm6dsx_driver = {
> + .driver = {
> + .name = "st_lsm6dsx_i3c",
> + .pm = &st_lsm6dsx_pm_ops,
> + },
> + .probe = st_lsm6dsx_i3c_probe,
> + .id_table = st_lsm6dsx_i3c_ids,
> +};
> +module_i3c_driver(st_lsm6dsx_driver);
> +
> +MODULE_AUTHOR("Vitor Soares <[email protected]>");
> +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver");
> +MODULE_LICENSE("GPL v2");

2019-07-19 15:14:49

by Vitor Soares

[permalink] [raw]
Subject: RE: [PATCH v5 2/2] iio: imu: st_lsm6dsx: add i3c basic support for LSM6DSO and LSM6DSR

From: Boris Brezillon <[email protected]>
Date: Fri, Jul 19, 2019 at 13:51:10

> On Fri, 19 Jul 2019 13:19:05 +0200
> Vitor Soares <[email protected]> wrote:
>
> > For today the st_lsm6dsx driver support LSM6DSO and LSM6DSR sensor only in
> > spi and i2c mode.
> >
> > The LSM6DSO and LSM6DSR are also i3c capable so let's give i3c support to
> > them.
> >
> > Signed-off-by: Vitor Soares <[email protected]>
> > Acked-by: Lorenzo Bianconi <[email protected]>
>
> Reviewed-by: Boris Brezillon <[email protected]>

Thanks ????

>
> > ---
> > Changes in v5:
> > Move regmap_config declaration inside st_lsm6dsx_i3c_probe()
> > Fix warning [-Wint-to-void-pointer-cast] when compiling in 64-bit arch
> >
> > Changes in v4:
> > Remove hw_id variable
> >
> > Changes in v3:
> > Remove unnecessary st_lsm6dsx_i3c_data table used to hold device name
> > Use st_lsm6dsx_probe new form
> >
> > Changes in v2:
> > Add support for LSM6DSR
> > Set pm_ops to st_lsm6dsx_pm_ops
> >
> > drivers/iio/imu/st_lsm6dsx/Kconfig | 8 +++-
> > drivers/iio/imu/st_lsm6dsx/Makefile | 1 +
> > drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c | 57 +++++++++++++++++++++++++++++
> > 3 files changed, 65 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> >
> > diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
> > index 9e59297..6b5a73c 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/Kconfig
> > +++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
> > @@ -1,11 +1,12 @@
> >
> > config IIO_ST_LSM6DSX
> > tristate "ST_LSM6DSx driver for STM 6-axis IMU MEMS sensors"
> > - depends on (I2C || SPI)
> > + depends on (I2C || SPI || I3C)
> > select IIO_BUFFER
> > select IIO_KFIFO_BUF
> > select IIO_ST_LSM6DSX_I2C if (I2C)
> > select IIO_ST_LSM6DSX_SPI if (SPI_MASTER)
> > + select IIO_ST_LSM6DSX_I3C if (I3C)
> > help
> > Say yes here to build support for STMicroelectronics LSM6DSx imu
> > sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
> > @@ -23,3 +24,8 @@ config IIO_ST_LSM6DSX_SPI
> > tristate
> > depends on IIO_ST_LSM6DSX
> > select REGMAP_SPI
> > +
> > +config IIO_ST_LSM6DSX_I3C
> > + tristate
> > + depends on IIO_ST_LSM6DSX
> > + select REGMAP_I3C
> > diff --git a/drivers/iio/imu/st_lsm6dsx/Makefile b/drivers/iio/imu/st_lsm6dsx/Makefile
> > index e5f733c..c676965 100644
> > --- a/drivers/iio/imu/st_lsm6dsx/Makefile
> > +++ b/drivers/iio/imu/st_lsm6dsx/Makefile
> > @@ -4,3 +4,4 @@ st_lsm6dsx-y := st_lsm6dsx_core.o st_lsm6dsx_buffer.o \
> > obj-$(CONFIG_IIO_ST_LSM6DSX) += st_lsm6dsx.o
> > obj-$(CONFIG_IIO_ST_LSM6DSX_I2C) += st_lsm6dsx_i2c.o
> > obj-$(CONFIG_IIO_ST_LSM6DSX_SPI) += st_lsm6dsx_spi.o
> > +obj-$(CONFIG_IIO_ST_LSM6DSX_I3C) += st_lsm6dsx_i3c.o
> > diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> > new file mode 100644
> > index 0000000..57e6331
> > --- /dev/null
> > +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i3c.c
> > @@ -0,0 +1,57 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2018 Synopsys, Inc. and/or its affiliates.
> > + *
> > + * Author: Vitor Soares <[email protected]>
> > + */
> > +
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/i3c/device.h>
> > +#include <linux/i3c/master.h>
> > +#include <linux/slab.h>
> > +#include <linux/of.h>
> > +#include <linux/regmap.h>
> > +
> > +#include "st_lsm6dsx.h"
> > +
> > +static const struct i3c_device_id st_lsm6dsx_i3c_ids[] = {
> > + I3C_DEVICE(0x0104, 0x006C, (void *)ST_LSM6DSO_ID),
> > + I3C_DEVICE(0x0104, 0x006B, (void *)ST_LSM6DSR_ID),
> > + { /* sentinel */ },
> > +};
> > +MODULE_DEVICE_TABLE(i3c, st_lsm6dsx_i3c_ids);
> > +
> > +static int st_lsm6dsx_i3c_probe(struct i3c_device *i3cdev)
> > +{
> > + struct regmap_config st_lsm6dsx_i3c_regmap_config = {
> > + .reg_bits = 8,
> > + .val_bits = 8,
> > + };
> > + const struct i3c_device_id *id = i3c_device_match_id(i3cdev,
> > + st_lsm6dsx_i3c_ids);
> > + struct regmap *regmap;
> > +
> > + regmap = devm_regmap_init_i3c(i3cdev, &st_lsm6dsx_i3c_regmap_config);
> > + if (IS_ERR(regmap)) {
> > + dev_err(&i3cdev->dev, "Failed to register i3c regmap %d\n",
> > + (int)PTR_ERR(regmap));
> > + return PTR_ERR(regmap);
> > + }
> > +
> > + return st_lsm6dsx_probe(&i3cdev->dev, 0, (uintptr_t)id->data, regmap);
> > +}
> > +
> > +static struct i3c_driver st_lsm6dsx_driver = {
> > + .driver = {
> > + .name = "st_lsm6dsx_i3c",
> > + .pm = &st_lsm6dsx_pm_ops,
> > + },
> > + .probe = st_lsm6dsx_i3c_probe,
> > + .id_table = st_lsm6dsx_i3c_ids,
> > +};
> > +module_i3c_driver(st_lsm6dsx_driver);
> > +
> > +MODULE_AUTHOR("Vitor Soares <[email protected]>");
> > +MODULE_DESCRIPTION("STMicroelectronics st_lsm6dsx i3c driver");
> > +MODULE_LICENSE("GPL v2");

Best regards,
Vitor Soares