Add support for TechNexion PICO-PI-IMX8M based on patches from Richard Hu
Datasheet is at: https://s3.us-east-2.amazonaws.com/technexion/datasheets/picopiimx8m.pdf
Changes since v5:
- removed comment /* PMIC BD71837 PMIC_nINT GPIO1_IO12 */
- added "Reviewed-by" tags
Changes since v4:
- removed #address-cells and #size-cells from regulators node
Changes since v3:
- renamed pico-pi-8m.dts to imx8mq-pico-pi.dts
- moved iomuxc node as the last one
- removed pinctrl-assert-gpios property from fec1 node
- removed at803x,led-act-blind-workaround, at803x,eee-disabled
properties from mdio node
- added pinctrl-names = "default" to i2c1 node
- changed bd71837 pmic support properties according to
Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
- removed A53_0 node
Changes since v2:
- changed PICO-PI-8M bord compatible from wand,imx8mq-pico-pi to
technexion,pico-pi-imx8m
- removed bootargs property
- removed regulators node and put fixed regulator directly under root node
- changed node name from usb_otg_vbus to regulator-usb-otg-vbus
- removed pinctrl-names property from iomuxc node
- removed wand-pi-8m container node
- sorted pinctrl nodes alphabetically
- removed tusb320_irqgrp, tusb320_irqgrp nodes because there is no upstream
driver
- changed properties' order in usb_dwc3_1 node
Changes since v1:
- renamed wandboard-pi-8m.dts to pico-pi-8m.dts
- removed pinctrl_csi1, pinctrl_wifi_ctrl
- used generic name for pmic
- removed gpo node
- delete regulator-virtuals node
- remove always-on property from buck1-8 and ldo3-7
- remove pmic-buck-uses-i2c-dvs property for buck1-4
Andra Danciu (1):
dt-bindings: arm: fsl: Add the pico-pi-imx8m board
Richard Hu (1):
arm64: dts: fsl: pico-pi: Add a device tree for the PICO-PI-IMX8M
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts | 413 +++++++++++++++++++++++
3 files changed, 415 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mq-pico-pi.dts
--
2.11.0
On Mon, Jul 22, 2019 at 01:27:28PM +0300, andradanciu1997 wrote:
> Add support for TechNexion PICO-PI-IMX8M based on patches from Richard Hu
> Datasheet is at: https://s3.us-east-2.amazonaws.com/technexion/datasheets/picopiimx8m.pdf
>
> Changes since v5:
> - removed comment /* PMIC BD71837 PMIC_nINT GPIO1_IO12 */
> - added "Reviewed-by" tags
>
> Changes since v4:
> - removed #address-cells and #size-cells from regulators node
>
> Changes since v3:
> - renamed pico-pi-8m.dts to imx8mq-pico-pi.dts
> - moved iomuxc node as the last one
> - removed pinctrl-assert-gpios property from fec1 node
> - removed at803x,led-act-blind-workaround, at803x,eee-disabled
> properties from mdio node
> - added pinctrl-names = "default" to i2c1 node
> - changed bd71837 pmic support properties according to
> Documentation/devicetree/bindings/regulator/rohm,bd71837-regulator.txt
> - removed A53_0 node
>
> Changes since v2:
> - changed PICO-PI-8M bord compatible from wand,imx8mq-pico-pi to
> technexion,pico-pi-imx8m
> - removed bootargs property
> - removed regulators node and put fixed regulator directly under root node
> - changed node name from usb_otg_vbus to regulator-usb-otg-vbus
> - removed pinctrl-names property from iomuxc node
> - removed wand-pi-8m container node
> - sorted pinctrl nodes alphabetically
> - removed tusb320_irqgrp, tusb320_irqgrp nodes because there is no upstream
> driver
> - changed properties' order in usb_dwc3_1 node
>
> Changes since v1:
> - renamed wandboard-pi-8m.dts to pico-pi-8m.dts
> - removed pinctrl_csi1, pinctrl_wifi_ctrl
> - used generic name for pmic
> - removed gpo node
> - delete regulator-virtuals node
> - remove always-on property from buck1-8 and ldo3-7
> - remove pmic-buck-uses-i2c-dvs property for buck1-4
>
> Andra Danciu (1):
> dt-bindings: arm: fsl: Add the pico-pi-imx8m board
>
> Richard Hu (1):
> arm64: dts: fsl: pico-pi: Add a device tree for the PICO-PI-IMX8M
Applied both, thanks.