So this is second installment of my work to fix warns on qcom DTS, this time
the traget is qcs404 platform.
Changes since v1:
- Fix node addresses as pointed by Amit
- Add review tags of Amit
Vinod Koul (3):
arm64: dts: qcom: pms405: add unit name adc nodes
arm64: dts: qcom: pms405: remove reduandant properties
arm64: dts: qcom: qcs404: remove unit name for thermal trip points
arch/arm64/boot/dts/qcom/pms405.dtsi | 16 +++++++--------
arch/arm64/boot/dts/qcom/qcs404.dtsi | 30 ++++++++++++++--------------
2 files changed, 22 insertions(+), 24 deletions(-)
--
2.20.1
The adc nodes have reg property but were missing the unit name, so add
that to fix these warnings:
arch/arm64/boot/dts/qcom/pms405.dtsi:91.12-94.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/ref_gnd: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:96.14-99.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vref_1p25: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:101.19-104.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vph_pwr: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:106.13-109.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/die_temp: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:111.27-116.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor1: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:118.27-123.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor3: node has a reg or ranges property, but no unit name
arch/arm64/boot/dts/qcom/pms405.dtsi:125.22-130.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/xo_temp: node has a reg or ranges property, but no unit name
Signed-off-by: Vinod Koul <[email protected]>
---
arch/arm64/boot/dts/qcom/pms405.dtsi | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index 14240fedd916..a28386900a3b 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -88,41 +88,41 @@
#size-cells = <0>;
#io-channel-cells = <1>;
- ref_gnd {
+ ref_gnd@0 {
reg = <ADC5_REF_GND>;
qcom,pre-scaling = <1 1>;
};
- vref_1p25 {
+ vref_1p25@1 {
reg = <ADC5_1P25VREF>;
qcom,pre-scaling = <1 1>;
};
- pon_1: vph_pwr {
+ pon_1: vph_pwr@131 {
reg = <ADC5_VPH_PWR>;
qcom,pre-scaling = <1 3>;
};
- die_temp {
+ die_temp@6 {
reg = <ADC5_DIE_TEMP>;
qcom,pre-scaling = <1 1>;
};
- pa_therm1: thermistor1 {
+ pa_therm1: thermistor1@77 {
reg = <ADC5_AMUX_THM1_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
- pa_therm3: thermistor3 {
+ pa_therm3: thermistor3@79 {
reg = <ADC5_AMUX_THM3_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
qcom,pre-scaling = <1 1>;
};
- xo_therm: xo_temp {
+ xo_therm: xo_temp@76 {
reg = <ADC5_XO_THERM_100K_PU>;
qcom,ratiometric;
qcom,hw-settle-time = <200>;
--
2.20.1
On Thu, Aug 1, 2019 at 3:22 PM Vinod Koul <[email protected]> wrote:
>
> The adc nodes have reg property but were missing the unit name, so add
> that to fix these warnings:
>
> arch/arm64/boot/dts/qcom/pms405.dtsi:91.12-94.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/ref_gnd: node has a reg or ranges property, but no unit name
> arch/arm64/boot/dts/qcom/pms405.dtsi:96.14-99.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vref_1p25: node has a reg or ranges property, but no unit name
> arch/arm64/boot/dts/qcom/pms405.dtsi:101.19-104.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/vph_pwr: node has a reg or ranges property, but no unit name
> arch/arm64/boot/dts/qcom/pms405.dtsi:106.13-109.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/die_temp: node has a reg or ranges property, but no unit name
> arch/arm64/boot/dts/qcom/pms405.dtsi:111.27-116.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor1: node has a reg or ranges property, but no unit name
> arch/arm64/boot/dts/qcom/pms405.dtsi:118.27-123.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/thermistor3: node has a reg or ranges property, but no unit name
> arch/arm64/boot/dts/qcom/pms405.dtsi:125.22-130.6: Warning (unit_address_vs_reg): /soc@0/spmi@200f000/pms405@0/adc@3100/xo_temp: node has a reg or ranges property, but no unit name
>
> Signed-off-by: Vinod Koul <[email protected]>
Reviewed-by: Amit Kucheria <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/pms405.dtsi | 14 +++++++-------
> 1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
> index 14240fedd916..a28386900a3b 100644
> --- a/arch/arm64/boot/dts/qcom/pms405.dtsi
> +++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
> @@ -88,41 +88,41 @@
> #size-cells = <0>;
> #io-channel-cells = <1>;
>
> - ref_gnd {
> + ref_gnd@0 {
> reg = <ADC5_REF_GND>;
> qcom,pre-scaling = <1 1>;
> };
>
> - vref_1p25 {
> + vref_1p25@1 {
> reg = <ADC5_1P25VREF>;
> qcom,pre-scaling = <1 1>;
> };
>
> - pon_1: vph_pwr {
> + pon_1: vph_pwr@131 {
> reg = <ADC5_VPH_PWR>;
> qcom,pre-scaling = <1 3>;
> };
>
> - die_temp {
> + die_temp@6 {
> reg = <ADC5_DIE_TEMP>;
> qcom,pre-scaling = <1 1>;
> };
>
> - pa_therm1: thermistor1 {
> + pa_therm1: thermistor1@77 {
> reg = <ADC5_AMUX_THM1_100K_PU>;
> qcom,ratiometric;
> qcom,hw-settle-time = <200>;
> qcom,pre-scaling = <1 1>;
> };
>
> - pa_therm3: thermistor3 {
> + pa_therm3: thermistor3@79 {
> reg = <ADC5_AMUX_THM3_100K_PU>;
> qcom,ratiometric;
> qcom,hw-settle-time = <200>;
> qcom,pre-scaling = <1 1>;
> };
>
> - xo_therm: xo_temp {
> + xo_therm: xo_temp@76 {
> reg = <ADC5_XO_THERM_100K_PU>;
> qcom,ratiometric;
> qcom,hw-settle-time = <200>;
> --
> 2.20.1
>
The thermal trip points have unit name but no reg property, so we can
remove them
arch/arm64/boot/dts/qcom/qcs404.dtsi:1080.31-1084.7: Warning (unit_address_vs_reg): /thermal-zones/aoss-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1095.33-1099.7: Warning (unit_address_vs_reg): /thermal-zones/q6-hvx-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1110.32-1114.7: Warning (unit_address_vs_reg): /thermal-zones/lpass-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1125.31-1129.7: Warning (unit_address_vs_reg): /thermal-zones/wlan-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1140.34-1144.7: Warning (unit_address_vs_reg): /thermal-zones/cluster-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1145.34-1149.7: Warning (unit_address_vs_reg): /thermal-zones/cluster-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1174.31-1178.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1179.31-1183.7: Warning (unit_address_vs_reg): /thermal-zones/cpu0-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1208.31-1212.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1213.31-1217.7: Warning (unit_address_vs_reg): /thermal-zones/cpu1-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1242.31-1246.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1247.31-1251.7: Warning (unit_address_vs_reg): /thermal-zones/cpu2-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1276.31-1280.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@0: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1281.31-1285.7: Warning (unit_address_vs_reg): /thermal-zones/cpu3-thermal/trips/trip-point@1: node has a unit name, but no reg property
arch/arm64/boot/dts/qcom/qcs404.dtsi:1310.30-1314.7: Warning (unit_address_vs_reg): /thermal-zones/gpu-thermal/trips/trip-point@0: node has a unit name, but no reg property
Signed-off-by: Vinod Koul <[email protected]>
Reviewed-by: Amit Kucheria <[email protected]>
---
arch/arm64/boot/dts/qcom/qcs404.dtsi | 30 ++++++++++++++--------------
1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 3d0789775009..6d91dae5aee0 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -1077,7 +1077,7 @@
thermal-sensors = <&tsens 0>;
trips {
- aoss_alert0: trip-point@0 {
+ aoss_alert0: trip-point0 {
temperature = <105000>;
hysteresis = <2000>;
type = "hot";
@@ -1092,7 +1092,7 @@
thermal-sensors = <&tsens 1>;
trips {
- q6_hvx_alert0: trip-point@0 {
+ q6_hvx_alert0: trip-point0 {
temperature = <105000>;
hysteresis = <2000>;
type = "hot";
@@ -1107,7 +1107,7 @@
thermal-sensors = <&tsens 2>;
trips {
- lpass_alert0: trip-point@0 {
+ lpass_alert0: trip-point0 {
temperature = <105000>;
hysteresis = <2000>;
type = "hot";
@@ -1122,7 +1122,7 @@
thermal-sensors = <&tsens 3>;
trips {
- wlan_alert0: trip-point@0 {
+ wlan_alert0: trip-point0 {
temperature = <105000>;
hysteresis = <2000>;
type = "hot";
@@ -1137,12 +1137,12 @@
thermal-sensors = <&tsens 4>;
trips {
- cluster_alert0: trip-point@0 {
+ cluster_alert0: trip-point0 {
temperature = <95000>;
hysteresis = <2000>;
type = "hot";
};
- cluster_alert1: trip-point@1 {
+ cluster_alert1: trip-point1 {
temperature = <105000>;
hysteresis = <2000>;
type = "passive";
@@ -1171,12 +1171,12 @@
thermal-sensors = <&tsens 5>;
trips {
- cpu0_alert0: trip-point@0 {
+ cpu0_alert0: trip-point0 {
temperature = <95000>;
hysteresis = <2000>;
type = "hot";
};
- cpu0_alert1: trip-point@1 {
+ cpu0_alert1: trip-point1 {
temperature = <105000>;
hysteresis = <2000>;
type = "passive";
@@ -1205,12 +1205,12 @@
thermal-sensors = <&tsens 6>;
trips {
- cpu1_alert0: trip-point@0 {
+ cpu1_alert0: trip-point0 {
temperature = <95000>;
hysteresis = <2000>;
type = "hot";
};
- cpu1_alert1: trip-point@1 {
+ cpu1_alert1: trip-point1 {
temperature = <105000>;
hysteresis = <2000>;
type = "passive";
@@ -1239,12 +1239,12 @@
thermal-sensors = <&tsens 7>;
trips {
- cpu2_alert0: trip-point@0 {
+ cpu2_alert0: trip-point0 {
temperature = <95000>;
hysteresis = <2000>;
type = "hot";
};
- cpu2_alert1: trip-point@1 {
+ cpu2_alert1: trip-point1 {
temperature = <105000>;
hysteresis = <2000>;
type = "passive";
@@ -1273,12 +1273,12 @@
thermal-sensors = <&tsens 8>;
trips {
- cpu3_alert0: trip-point@0 {
+ cpu3_alert0: trip-point0 {
temperature = <95000>;
hysteresis = <2000>;
type = "hot";
};
- cpu3_alert1: trip-point@1 {
+ cpu3_alert1: trip-point1 {
temperature = <105000>;
hysteresis = <2000>;
type = "passive";
@@ -1307,7 +1307,7 @@
thermal-sensors = <&tsens 9>;
trips {
- gpu_alert0: trip-point@0 {
+ gpu_alert0: trip-point0 {
temperature = <95000>;
hysteresis = <2000>;
type = "hot";
--
2.20.1
pms405@1 nodes specified unnecessary #address-cells/#size-cells but the
subnodes dont have "ranges" or "reg" so remove it
arch/arm64/boot/dts/qcom/pms405.dtsi:141.21-150.4: Warning (avoid_unnecessary_addr_size): /soc@0/spmi@200f000/pms405@1: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Vinod Koul <[email protected]>
Reviewed-by: Amit Kucheria <[email protected]>
---
arch/arm64/boot/dts/qcom/pms405.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/pms405.dtsi b/arch/arm64/boot/dts/qcom/pms405.dtsi
index a28386900a3b..ff4005186895 100644
--- a/arch/arm64/boot/dts/qcom/pms405.dtsi
+++ b/arch/arm64/boot/dts/qcom/pms405.dtsi
@@ -141,8 +141,6 @@
pms405_1: pms405@1 {
compatible = "qcom,spmi-pmic";
reg = <0x1 SPMI_USID>;
- #address-cells = <1>;
- #size-cells = <0>;
pms405_spmi_regulators: regulators {
compatible = "qcom,pms405-regulators";
--
2.20.1