This patch rewrites the alim1535_wdt driver to use the watchdog subsystem.
By virtue of this, it also fixes a (theoretical) race condition between the
formerly arranged ali_timeout_bits and ali_settimer() interoperation.
Signed-off-by: Mark Balantzyan <[email protected]>
---
drivers/watchdog/Kconfig | 1 +
drivers/watchdog/alim1535_wdt.c | 294 ++++++--------------------------
2 files changed, 50 insertions(+), 245 deletions(-)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 9af07fd9..980b0c90 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -853,6 +853,7 @@ config ADVANTECH_WDT
config ALIM1535_WDT
tristate "ALi M1535 PMU Watchdog Timer"
+ select WATCHDOG_CORE
depends on X86 && PCI
---help---
This is the driver for the hardware watchdog on the ALi M1535 PMU.
diff --git a/drivers/watchdog/alim1535_wdt.c b/drivers/watchdog/alim1535_wdt.c
index 60f0c2eb..747ba12c 100644
--- a/drivers/watchdog/alim1535_wdt.c
+++ b/drivers/watchdog/alim1535_wdt.c
@@ -12,29 +12,20 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
-#include <linux/miscdevice.h>
#include <linux/watchdog.h>
#include <linux/ioport.h>
-#include <linux/notifier.h>
-#include <linux/reboot.h>
-#include <linux/init.h>
-#include <linux/fs.h>
#include <linux/pci.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
#define WATCHDOG_NAME "ALi_M1535"
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
/* internal variables */
-static unsigned long ali_is_open;
-static char ali_expect_release;
static struct pci_dev *ali_pci;
static u32 ali_timeout_bits; /* stores the computed timeout */
static DEFINE_SPINLOCK(ali_lock); /* Guards the hardware */
/* module parameters */
-static int timeout = WATCHDOG_TIMEOUT;
+static int timeout;
module_param(timeout, int, 0);
MODULE_PARM_DESC(timeout,
"Watchdog timeout in seconds. (0 < timeout < 18000, default="
@@ -53,18 +44,15 @@ MODULE_PARM_DESC(nowayout,
* configuration set.
*/
-static void ali_start(void)
+static int ali_start(struct watchdog_device *wdd)
{
u32 val;
- spin_lock(&ali_lock);
-
pci_read_config_dword(ali_pci, 0xCC, &val);
val &= ~0x3F; /* Mask count */
val |= (1 << 25) | ali_timeout_bits;
pci_write_config_dword(ali_pci, 0xCC, val);
-
- spin_unlock(&ali_lock);
+ return 0;
}
/*
@@ -73,225 +61,53 @@ static void ali_start(void)
* Stop the ALi watchdog countdown
*/
-static void ali_stop(void)
+static int ali_stop(struct watchdog_device *wdd)
{
u32 val;
- spin_lock(&ali_lock);
-
pci_read_config_dword(ali_pci, 0xCC, &val);
val &= ~0x3F; /* Mask count to zero (disabled) */
val &= ~(1 << 25); /* and for safety mask the reset enable */
pci_write_config_dword(ali_pci, 0xCC, val);
-
- spin_unlock(&ali_lock);
-}
-
-/*
- * ali_keepalive - send a keepalive to the watchdog
- *
- * Send a keepalive to the timer (actually we restart the timer).
- */
-
-static void ali_keepalive(void)
-{
- ali_start();
+ return 0;
}
/*
- * ali_settimer - compute the timer reload value
+ * ali_set_timeout - compute the timer reload value
* @t: time in seconds
*
* Computes the timeout values needed
*/
-static int ali_settimer(int t)
+static int ali_set_timeout(struct watchdog_device *wdd, unsigned int t)
{
- if (t < 0)
- return -EINVAL;
- else if (t < 60)
- ali_timeout_bits = t|(1 << 6);
- else if (t < 3600)
- ali_timeout_bits = (t / 60)|(1 << 7);
- else if (t < 18000)
- ali_timeout_bits = (t / 300)|(1 << 6)|(1 << 7);
- else
+ spin_lock(&ali_lock);
+ if (t < 0) {
+ spin_unlock(&ali_lock);
return -EINVAL;
-
- timeout = t;
- return 0;
-}
-
-/*
- * /dev/watchdog handling
- */
-
-/*
- * ali_write - writes to ALi watchdog
- * @file: file from VFS
- * @data: user address of data
- * @len: length of data
- * @ppos: pointer to the file offset
- *
- * Handle a write to the ALi watchdog. Writing to the file pings
- * the watchdog and resets it. Writing the magic 'V' sequence allows
- * the next close to turn off the watchdog.
- */
-
-static ssize_t ali_write(struct file *file, const char __user *data,
- size_t len, loff_t *ppos)
-{
- /* See if we got the magic character 'V' and reload the timer */
- if (len) {
- if (!nowayout) {
- size_t i;
-
- /* note: just in case someone wrote the
- magic character five months ago... */
- ali_expect_release = 0;
-
- /* scan to see whether or not we got
- the magic character */
- for (i = 0; i != len; i++) {
- char c;
- if (get_user(c, data + i))
- return -EFAULT;
- if (c == 'V')
- ali_expect_release = 42;
- }
- }
-
- /* someone wrote to us, we should reload the timer */
- ali_start();
}
- return len;
-}
-
-/*
- * ali_ioctl - handle watchdog ioctls
- * @file: VFS file pointer
- * @cmd: ioctl number
- * @arg: arguments to the ioctl
- *
- * Handle the watchdog ioctls supported by the ALi driver. Really
- * we want an extension to enable irq ack monitoring and the like
- */
-
-static long ali_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
-{
- void __user *argp = (void __user *)arg;
- int __user *p = argp;
- static const struct watchdog_info ident = {
- .options = WDIOF_KEEPALIVEPING |
- WDIOF_SETTIMEOUT |
- WDIOF_MAGICCLOSE,
- .firmware_version = 0,
- .identity = "ALi M1535 WatchDog Timer",
- };
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- return copy_to_user(argp, &ident, sizeof(ident)) ? -EFAULT : 0;
-
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- return put_user(0, p);
- case WDIOC_SETOPTIONS:
- {
- int new_options, retval = -EINVAL;
-
- if (get_user(new_options, p))
- return -EFAULT;
- if (new_options & WDIOS_DISABLECARD) {
- ali_stop();
- retval = 0;
- }
- if (new_options & WDIOS_ENABLECARD) {
- ali_start();
- retval = 0;
- }
- return retval;
+ } else if (t < 60) {
+ ali_timeout_bits = t | (1 << 6);
}
- case WDIOC_KEEPALIVE:
- ali_keepalive();
- return 0;
- case WDIOC_SETTIMEOUT:
- {
- int new_timeout;
- if (get_user(new_timeout, p))
- return -EFAULT;
- if (ali_settimer(new_timeout))
- return -EINVAL;
- ali_keepalive();
+ } else if (t < 3600) {
+ ali_timeout_bits = (t / 60) | (1 << 7);
}
- /* fall through */
- case WDIOC_GETTIMEOUT:
- return put_user(timeout, p);
- default:
- return -ENOTTY;
+ } else if (t < 18000) {
+ ali_timeout_bits = (t / 300) | (1 << 6) | (1 << 7);
}
-}
-
-/*
- * ali_open - handle open of ali watchdog
- * @inode: inode from VFS
- * @file: file from VFS
- *
- * Open the ALi watchdog device. Ensure only one person opens it
- * at a time. Also start the watchdog running.
- */
-
-static int ali_open(struct inode *inode, struct file *file)
-{
- /* /dev/watchdog can only be opened once */
- if (test_and_set_bit(0, &ali_is_open))
- return -EBUSY;
-
- /* Activate */
- ali_start();
- return nonseekable_open(inode, file);
-}
-
-/*
- * ali_release - close an ALi watchdog
- * @inode: inode from VFS
- * @file: file from VFS
- *
- * Close the ALi watchdog device. Actual shutdown of the timer
- * only occurs if the magic sequence has been set.
- */
-
-static int ali_release(struct inode *inode, struct file *file)
-{
- /*
- * Shut off the timer.
- */
- if (ali_expect_release == 42)
- ali_stop();
else {
- pr_crit("Unexpected close, not stopping watchdog!\n");
- ali_keepalive();
+ spin_unlock(&ali_lock);
+ return -EINVAL;
}
- clear_bit(0, &ali_is_open);
- ali_expect_release = 0;
+ wdd->timeout = t;
+ spin_unlock(&ali_lock);
return 0;
}
/*
- * ali_notify_sys - System down notifier
- *
- * Notifier for system down
+ * /dev/watchdog handling
*/
-
-static int ali_notify_sys(struct notifier_block *this,
- unsigned long code, void *unused)
-{
- if (code == SYS_DOWN || code == SYS_HALT)
- ali_stop(); /* Turn the WDT off */
- return NOTIFY_DONE;
-}
-
/*
* Data for PCI driver interface
*
@@ -361,23 +177,25 @@ static int __init ali_find_watchdog(void)
* Kernel Interfaces
*/
-static const struct file_operations ali_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = ali_write,
- .unlocked_ioctl = ali_ioctl,
- .open = ali_open,
- .release = ali_release,
+static struct watchdog_ops alim1535wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = ali_start,
+ .stop = ali_stop,
+ .set_timeout = ali_set_timeout,
};
-static struct miscdevice ali_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &ali_fops,
-};
-
-static struct notifier_block ali_notifier = {
- .notifier_call = ali_notify_sys,
+static const struct watchdog_info alim1535wdt_ident = {
+ .firmware_version = 0,
+ .identity = "ALi M1535 Watchdog",
+ };
+
+static struct watchdog_device alim1535wdt_wdd = {
+ .ops = &alim1535wdt_ops,
+ .info = &alim1535wdt_ident,
+ .status = WATCHDOG_NOWAYOUT_INIT_STATUS,
+ .min_timeout = 1,
+ .max_timeout = 18000,
+
};
/*
@@ -403,30 +221,20 @@ static int __init watchdog_init(void)
timeout);
}
- /* Calculate the watchdog's timeout */
- ali_settimer(timeout);
+ watchdog_stop_on_reboot(&alim1535wdt_wdd);
+
+ watchdog_init_timeout(&alim1535wdt_wdd, timeout, NULL);
+
+ watchdog_set_nowayout(&alim1535wdt_wdd, nowayout);
- ret = register_reboot_notifier(&ali_notifier);
- if (ret != 0) {
- pr_err("cannot register reboot notifier (err=%d)\n", ret);
- goto out;
- }
+ ret = watchdog_register_device(&alim1535wdt_wdd);
- ret = misc_register(&ali_miscdev);
if (ret != 0) {
- pr_err("cannot register miscdev on minor=%d (err=%d)\n",
- WATCHDOG_MINOR, ret);
- goto unreg_reboot;
+ return ret;
}
+
+ return 0;
- pr_info("initialized. timeout=%d sec (nowayout=%d)\n",
- timeout, nowayout);
-
-out:
- return ret;
-unreg_reboot:
- unregister_reboot_notifier(&ali_notifier);
- goto out;
}
/*
@@ -437,12 +245,8 @@ unreg_reboot:
static void __exit watchdog_exit(void)
{
- /* Stop the timer before we leave */
- ali_stop();
-
/* Deregister */
- misc_deregister(&ali_miscdev);
- unregister_reboot_notifier(&ali_notifier);
+ watchdog_unregister_device(&alim1535wdt_wdd);
pci_dev_put(ali_pci);
}
@@ -451,4 +255,4 @@ module_exit(watchdog_exit);
MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("ALi M1535 PMU Watchdog Timer driver");
-MODULE_LICENSE("GPL");
+MODULE_LICENSE("GPL");
--
2.17.1
On Friday 02 August 2019, Mark Balantzyan wrote:
> This patch rewrites the alim1535_wdt driver to use the watchdog subsystem.
> By virtue of this, it also fixes a (theoretical) race condition between the
> formerly arranged ali_timeout_bits and ali_settimer() interoperation.
Please don't rewrite drivers you can't test.
--
Ondrej Zary
Dear Ondrej,
As advised by another kernel maintainer, patches for antiquated drivers
like these (this one which I test-built successfully) should hang around
until someone with the hardware volunteers to test it. Therefore, I would
provide the software and the individual would serve as the hardware tester
with the provided software. So far, I've worked with Guenter Roeck to
conform it to the watchdog subsystem. And now I'm letting it sit until
someone with the hardware is able to test it.
Thank you,
Mark