Add devicetree support for RK3399Pro TB-96AI board, one of
the 96Boards family.
The TB-96AI board is a 96Boards Compute SOM design, launched
by Linaro, Rockchip and Beiqicloud.
More information can be obtained from the following websites:
1.https://www.96boards.org/product/tb-96ai/
2.http://t.rock-chips.com/
3.http://www.beiqicloud.com/
This patch add basic node for the board and support booting up
to Fedora.
Signed-off-by: Elon Zhang <[email protected]>
---
changes since v1:
- remove needless node
- using a standard LED formats for 96Boards
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3399pro-tb-96ai.dts | 560 ++++++++++++++++++
2 files changed, 561 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 5f2687acbf94..3d6c8d4363b5 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -27,3 +27,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-tb-96ai.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
new file mode 100644
index 000000000000..767b37b854ba
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
@@ -0,0 +1,560 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
+ */
+
+/dts-v1/;
+#include "rk3399pro.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ compatible = "beiqi,rk3399pro-tb-96ai", "rockchip,rk3399pro";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ xin32k: xin32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "xin32k";
+ #clock-cells = <0>;
+ };
+
+ vcc5v0_sys: vccsys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&work_led1>,<&work_led2>,<&work_led3>;
+
+ work_led1 {
+ gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ label = "system_work_led1";
+ retain-state-suspended;
+ };
+
+ work_led2 {
+ gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
+ label = "system_work_led2";
+ retain-state-suspended;
+ };
+
+ work_led3 {
+ gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+ label = "system_work_led3";
+ retain-state-suspended;
+ };
+ };
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ i2c-scl-rising-time-ns = <180>;
+ i2c-scl-falling-time-ns = <30>;
+ clock-frequency = <400000>;
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
+ pinctrl-names = "default", "pmic-sleep",
+ "pmic-power-off", "pmic-reset";
+ pinctrl-0 = <&pmic_int_l>;
+ pinctrl-1 = <&soc_slppin_slp>, <&rk809_slppin_slp>;
+ pinctrl-2 = <&soc_slppin_gpio>, <&rk809_slppin_pwrdn>;
+ pinctrl-3 = <&soc_slppin_gpio>,<&rk809_slppin_null>;
+ rockchip,system-power-controller;
+ pmic-reset-func = <1>;
+ wakeup-source;
+ #clock-cells = <1>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc_buck5>;
+ vcc6-supply = <&vcc_buck5>;
+ vcc7-supply = <&vcc3v3_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+
+ pwrkey {
+ status = "okay";
+ };
+
+ rtc {
+ status = "okay";
+ };
+
+ pinctrl_rk8xx: pinctrl_rk8xx {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ rk809_slppin_null: rk809_slppin_null {
+ pins = "gpio_slp";
+ function = "pin_fun0";
+ };
+
+ rk809_slppin_slp: rk809_slppin_slp {
+ pins = "gpio_slp";
+ function = "pin_fun1";
+ };
+
+ rk809_slppin_pwrdn: rk809_slppin_pwrdn {
+ pins = "gpio_slp";
+ function = "pin_fun2";
+ };
+
+ rk809_slppin_rst: rk809_slppin_rst {
+ pins = "gpio_slp";
+ function = "pin_fun3";
+ };
+ };
+
+ regulators {
+ vdd_center: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_center";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_cpu_l";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_sys: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vcc3v3_sys";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_buck5: DCDC_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-name = "vcc_buck5";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <2200000>;
+ };
+ };
+
+ vcca_0v9: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vcca_0v9";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-name = "vcc_1v8";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc0v9_soc: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-name = "vcc0v9_soc";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-name = "vcca_1v8";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd1v5_dvp: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ regulator-name = "vdd1v5_dvp";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ regulator-name = "vcc_1v5";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-name = "vcc_3v0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_sd: LDO_REG9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-name = "vcc_sd";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc5v0_usb: SWITCH_REG1 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ regulator-name = "vcc5v0_usb";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_3v3: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-name = "vccio_3v3";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: regulator@1c {
+ compatible = "fcs,fan53555";
+ reg = <0x1c>;
+ vin-supply = <&vcc5v0_sys>;
+ pinctrl-0 = <&vsel1_gpio>;
+ vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <2300>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-initial-state = <3>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: regulator@10 {
+ compatible = "fcs,fan53555";
+ status = "okay";
+ reg = <0x10>;
+ vin-supply = <&vcc5v0_sys>;
+ pinctrl-0 = <&vsel2_gpio>;
+ vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <735000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <2300>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&i2c8 {
+ status = "okay";
+ i2c-scl-rising-time-ns = <345>;
+ i2c-scl-falling-time-ns = <11>;
+ clock-frequency = <100000>;
+};
+
+&io_domains {
+ status = "okay";
+ bt656-supply = <&vcca_1v8>; /* APIO2_VDD */
+ audio-supply = <&vcca_1v8>; /* APIO5_VDD */
+ sdmmc-supply = <&vccio_sd>; /* SDMMC0_VDD */
+ gpio1830-supply = <&vcc_1v8>; /* APIO4_VDD */
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&npu_ref_clk>;
+
+ leds {
+ work_led1: work_led1 {
+ rockchip,pins =
+ <2 5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ work_led2: work_led2 {
+ rockchip,pins =
+ <2 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ work_led3: work_led3 {
+ rockchip,pins =
+ <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ npu_clk {
+ npu_ref_clk: npu-ref-clk {
+ rockchip,pins =
+ <0 RK_PA2 1 &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins =
+ <1 RK_PC2 0 &pcfg_pull_up>;
+ };
+
+ soc_slppin_gpio: soc-slppin-gpio {
+ rockchip,pins =
+ <1 RK_PA5 0 &pcfg_output_low>;
+ };
+
+ soc_slppin_slp: soc-slppin-slp {
+ rockchip,pins =
+ <1 RK_PA5 1 &pcfg_pull_down>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins =
+ <1 RK_PC1 0 &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins =
+ <1 RK_PB6 0 &pcfg_pull_down>;
+ };
+ };
+
+ usb3 {
+ usb3_host_en: usb3-host-en {
+ rockchip,pins =
+ <2 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
+ };
+ };
+};
+
+&pmu_io_domains {
+ status = "okay";
+ pmu1830-supply = <&vcc_1v8>;
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&saradc {
+ status = "okay";
+ vref-supply = <&vcc_1v8>;
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ non-removable;
+ keep-power-in-suspend;
+ mmc-hs400-enhanced-strobe;
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&tsadc {
+ rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
+ status = "okay";
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vcc5v0_usb>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts>;
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart4 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb3_host_en>;
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ snps,dis-u3-autosuspend-quirk;
+ status = "okay";
+};
+
--
2.17.1
Hi Elon,
Thanks for the v2. Still the DT needs to be cleaned up a bit. I have tested this
patch on TB96-AI SOM/Carrier board and found that the USB ports are not working
at all! Do we need to change any switch settings?
Comments are inline.
On Mon, Aug 05, 2019 at 09:57:55AM +0800, Elon Zhang wrote:
> Add devicetree support for RK3399Pro TB-96AI board, one of
> the 96Boards family.
>
> The TB-96AI board is a 96Boards Compute SOM design, launched
> by Linaro, Rockchip and Beiqicloud.
>
> More information can be obtained from the following websites:
> 1.https://www.96boards.org/product/tb-96ai/
> 2.http://t.rock-chips.com/
> 3.http://www.beiqicloud.com/
>
> This patch add basic node for the board and support booting up
> to Fedora.
>
> Signed-off-by: Elon Zhang <[email protected]>
> ---
> changes since v1:
> - remove needless node
> - using a standard LED formats for 96Boards
>
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../boot/dts/rockchip/rk3399pro-tb-96ai.dts | 560 ++++++++++++++++++
> 2 files changed, 561 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 5f2687acbf94..3d6c8d4363b5 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -27,3 +27,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-tb-96ai.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
> new file mode 100644
> index 000000000000..767b37b854ba
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
> @@ -0,0 +1,560 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
> + */
> +
> +/dts-v1/;
> +#include "rk3399pro.dtsi"
> +#include "rk3399-opp.dtsi"
> +
> +/ {
> + compatible = "beiqi,rk3399pro-tb-96ai", "rockchip,rk3399pro";
> +
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + xin32k: xin32k {
> + compatible = "fixed-clock";
> + clock-frequency = <32768>;
> + clock-output-names = "xin32k";
> + #clock-cells = <0>;
> + };
> +
> + vcc5v0_sys: vccsys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
> +
> + leds {
Still the LEDs are not defined as per the format I shared before...
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&work_led1>,<&work_led2>,<&work_led3>;
> +
> + work_led1 {
> + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
> + label = "system_work_led1";
> + retain-state-suspended;
> + };
> +
> + work_led2 {
> + gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
> + label = "system_work_led2";
> + retain-state-suspended;
> + };
> +
> + work_led3 {
> + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
> + label = "system_work_led3";
> + retain-state-suspended;
> + };
> + };
> +};
> +
> +&cpu_l0 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l1 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l2 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l3 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_b0 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_b1 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&emmc_phy {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> + i2c-scl-rising-time-ns = <180>;
> + i2c-scl-falling-time-ns = <30>;
> + clock-frequency = <400000>;
> +
> + rk809: pmic@20 {
> + compatible = "rockchip,rk809";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default", "pmic-sleep",
> + "pmic-power-off", "pmic-reset";
Does these pinctrl configs useful other than default?
> + pinctrl-0 = <&pmic_int_l>;
> + pinctrl-1 = <&soc_slppin_slp>, <&rk809_slppin_slp>;
> + pinctrl-2 = <&soc_slppin_gpio>, <&rk809_slppin_pwrdn>;
> + pinctrl-3 = <&soc_slppin_gpio>,<&rk809_slppin_null>;
> + rockchip,system-power-controller;
> + pmic-reset-func = <1>;
> + wakeup-source;
> + #clock-cells = <1>;
> + clock-output-names = "rk808-clkout1", "rk808-clkout2";
> +
> + vcc1-supply = <&vcc5v0_sys>;
> + vcc2-supply = <&vcc5v0_sys>;
> + vcc3-supply = <&vcc5v0_sys>;
> + vcc4-supply = <&vcc5v0_sys>;
> + vcc5-supply = <&vcc_buck5>;
> + vcc6-supply = <&vcc_buck5>;
> + vcc7-supply = <&vcc3v3_sys>;
> + vcc8-supply = <&vcc3v3_sys>;
> + vcc9-supply = <&vcc5v0_sys>;
> +
> + pwrkey {
> + status = "okay";
No compatible needed?
> + };
> +
> + rtc {
> + status = "okay";
No compatible needed?
> + };
> +
> + pinctrl_rk8xx: pinctrl_rk8xx {
Mainline MFD driver has no pinctrl support for RK809.
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + rk809_slppin_null: rk809_slppin_null {
> + pins = "gpio_slp";
> + function = "pin_fun0";
> + };
> +
> + rk809_slppin_slp: rk809_slppin_slp {
> + pins = "gpio_slp";
> + function = "pin_fun1";
> + };
> +
> + rk809_slppin_pwrdn: rk809_slppin_pwrdn {
> + pins = "gpio_slp";
> + function = "pin_fun2";
> + };
> +
> + rk809_slppin_rst: rk809_slppin_rst {
> + pins = "gpio_slp";
> + function = "pin_fun3";
> + };
> + };
> +
> + regulators {
> + vdd_center: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-initial-mode = <0x2>;
> + regulator-name = "vdd_center";
Please match the regulator names with schematic.
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <900000>;
> + };
> + };
> +
> + vdd_cpu_l: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-ramp-delay = <6001>;
> + regulator-initial-mode = <0x2>;
> + regulator-name = "vdd_cpu_l";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_ddr";
> + regulator-initial-mode = <0x2>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc3v3_sys: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <0x2>;
> + regulator-name = "vcc3v3_sys";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_buck5: DCDC_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <2200000>;
> + regulator-max-microvolt = <2200000>;
> + regulator-name = "vcc_buck5";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <2200000>;
> + };
> + };
> +
> + vcca_0v9: LDO_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-name = "vcca_0v9";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v8: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-name = "vcc_1v8";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc0v9_soc: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> +
> + regulator-name = "vcc0v9_soc";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <900000>;
> + };
> + };
> +
> + vcca_1v8: LDO_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-name = "vcca_1v8";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd1v5_dvp: LDO_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> +
> + regulator-name = "vdd1v5_dvp";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v5: LDO_REG6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> +
> + regulator-name = "vcc_1v5";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_3v0: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> +
> + regulator-name = "vcc_3v0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vccio_sd: LDO_REG8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-name = "vccio_sd";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_sd: LDO_REG9 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-name = "vcc_sd";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc5v0_usb: SWITCH_REG1 {
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> +
> + regulator-name = "vcc5v0_usb";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vccio_3v3: SWITCH_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-name = "vccio_3v3";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> + };
> + };
> +
> + vdd_cpu_b: regulator@1c {
> + compatible = "fcs,fan53555";
> + reg = <0x1c>;
> + vin-supply = <&vcc5v0_sys>;
> + pinctrl-0 = <&vsel1_gpio>;
> + vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
> + regulator-name = "vdd_cpu_b";
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <2300>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-initial-state = <3>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu: regulator@10 {
> + compatible = "fcs,fan53555";
> + status = "okay";
> + reg = <0x10>;
> + vin-supply = <&vcc5v0_sys>;
> + pinctrl-0 = <&vsel2_gpio>;
> + vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
> + regulator-name = "vdd_gpu";
> + regulator-min-microvolt = <735000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-ramp-delay = <2300>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +};
> +
> +&i2c8 {
> + status = "okay";
> + i2c-scl-rising-time-ns = <345>;
> + i2c-scl-falling-time-ns = <11>;
> + clock-frequency = <100000>;
> +};
> +
> +&io_domains {
> + status = "okay";
> + bt656-supply = <&vcca_1v8>; /* APIO2_VDD */
> + audio-supply = <&vcca_1v8>; /* APIO5_VDD */
> + sdmmc-supply = <&vccio_sd>; /* SDMMC0_VDD */
> + gpio1830-supply = <&vcc_1v8>; /* APIO4_VDD */
> +};
> +
> +&pinctrl {
> + pinctrl-names = "default";
> + pinctrl-0 = <&npu_ref_clk>;
> +
> + leds {
> + work_led1: work_led1 {
> + rockchip,pins =
> + <2 5 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + work_led2: work_led2 {
> + rockchip,pins =
> + <2 4 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + work_led3: work_led3 {
> + rockchip,pins =
> + <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + npu_clk {
> + npu_ref_clk: npu-ref-clk {
> + rockchip,pins =
> + <0 RK_PA2 1 &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + pmic_int_l: pmic-int-l {
> + rockchip,pins =
> + <1 RK_PC2 0 &pcfg_pull_up>;
> + };
> +
> + soc_slppin_gpio: soc-slppin-gpio {
> + rockchip,pins =
> + <1 RK_PA5 0 &pcfg_output_low>;
> + };
> +
> + soc_slppin_slp: soc-slppin-slp {
> + rockchip,pins =
> + <1 RK_PA5 1 &pcfg_pull_down>;
> + };
> +
> + vsel1_gpio: vsel1-gpio {
> + rockchip,pins =
> + <1 RK_PC1 0 &pcfg_pull_down>;
> + };
> +
> + vsel2_gpio: vsel2-gpio {
> + rockchip,pins =
> + <1 RK_PB6 0 &pcfg_pull_down>;
> + };
> + };
> +
> + usb3 {
> + usb3_host_en: usb3-host-en {
> + rockchip,pins =
> + <2 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
> + };
> + };
> +};
> +
> +&pmu_io_domains {
> + status = "okay";
> + pmu1830-supply = <&vcc_1v8>;
> +};
> +
> +&pwm0 {
> + status = "okay";
> +};
> +
> +&pwm2 {
> + status = "okay";
> +};
> +
> +&saradc {
> + status = "okay";
> + vref-supply = <&vcc_1v8>;
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + mmc-hs400-1_8v;
> + non-removable;
> + keep-power-in-suspend;
> + mmc-hs400-enhanced-strobe;
> + status = "okay";
> +};
> +
> +&tcphy1 {
No tcphy0? I can see this used in schematics.
> + status = "okay";
> +};
> +
> +&tsadc {
> + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
> + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
> + status = "okay";
> +};
> +
> +&u2phy1 {
No u2phy0?
> + status = "okay";
> +
> + u2phy1_otg: otg-port {
> + status = "okay";
> + };
> +
> + u2phy1_host: host-port {
> + phy-supply = <&vcc5v0_usb>;
> + status = "okay";
> + };
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_xfer &uart0_cts>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart4 {
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_host1_ehci {
> + status = "okay";
> +};
> +
> +&usb_host0_ohci {
> + status = "okay";
> +};
> +
> +&usb_host1_ohci {
> + status = "okay";
> +};
> +
> +&usbdrd3_1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb3_host_en>;
> +};
> +
> +&usbdrd_dwc3_0 {
No usbdrd3_0?
Thanks,
Mani
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_1 {
> + snps,dis-u3-autosuspend-quirk;
> + status = "okay";
> +};
> +
> --
> 2.17.1
>
>
>
Hi Mani,
Thanks for your review. Please see comments inline.
在 8/5/2019 19:28, Manivannan Sadhasivam 写道:
> Hi Elon,
>
> Thanks for the v2. Still the DT needs to be cleaned up a bit. I have tested this
> patch on TB96-AI SOM/Carrier board and found that the USB ports are not working
> at all! Do we need to change any switch settings?
Yes. The USB ports can not work. I have already added all USB related
setting. I tried
rockchip internel rk3399.dtsi and the USB ports can work, so I think the
cause is SoC related
setting difference in mainline kernel.
I can not figure it out for now, should I remove the usb related node in
this patch?
>
> Comments are inline.
>
> On Mon, Aug 05, 2019 at 09:57:55AM +0800, Elon Zhang wrote:
>> Add devicetree support for RK3399Pro TB-96AI board, one of
>> the 96Boards family.
>>
>> The TB-96AI board is a 96Boards Compute SOM design, launched
>> by Linaro, Rockchip and Beiqicloud.
>>
>> More information can be obtained from the following websites:
>> 1.https://www.96boards.org/product/tb-96ai/
>> 2.http://t.rock-chips.com/
>> 3.http://www.beiqicloud.com/
>>
>> This patch add basic node for the board and support booting up
>> to Fedora.
>>
>> Signed-off-by: Elon Zhang <[email protected]>
>> ---
>> changes since v1:
>> - remove needless node
>> - using a standard LED formats for 96Boards
>>
>> arch/arm64/boot/dts/rockchip/Makefile | 1 +
>> .../boot/dts/rockchip/rk3399pro-tb-96ai.dts | 560 ++++++++++++++++++
>> 2 files changed, 561 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
>> index 5f2687acbf94..3d6c8d4363b5 100644
>> --- a/arch/arm64/boot/dts/rockchip/Makefile
>> +++ b/arch/arm64/boot/dts/rockchip/Makefile
>> @@ -27,3 +27,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
>> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
>> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-tb-96ai.dtb
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
>> new file mode 100644
>> index 000000000000..767b37b854ba
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
>> @@ -0,0 +1,560 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
>> +/*
>> + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
>> + */
>> +
>> +/dts-v1/;
>> +#include "rk3399pro.dtsi"
>> +#include "rk3399-opp.dtsi"
>> +
>> +/ {
>> + compatible = "beiqi,rk3399pro-tb-96ai", "rockchip,rk3399pro";
>> +
>> + chosen {
>> + stdout-path = "serial2:1500000n8";
>> + };
>> +
>> + xin32k: xin32k {
>> + compatible = "fixed-clock";
>> + clock-frequency = <32768>;
>> + clock-output-names = "xin32k";
>> + #clock-cells = <0>;
>> + };
>> +
>> + vcc5v0_sys: vccsys {
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc5v0_sys";
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + };
>> +
>> + leds {
> Still the LEDs are not defined as per the format I shared before...
I am not very sure what the format exactly is. Is the LEDs format below
right?
49 leds {
50 compatible = "gpio-leds";
51 pinctrl-names = "default";
52 pinctrl-0 = <&user_led1>,<&user_led2>,<&user_led3>;
53
54 user_led1 {
55 label = "green:user1";
56 gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
57 retain-state-suspended;
58 };
59
60 user_led2 {
61 label = "green:user2";
62 gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
63 retain-state-suspended;
64 };
65
66 user_led3 {
67 label = "green:user3";
68 gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
69 retain-state-suspended;
70 };
71 };
>
>> + compatible = "gpio-leds";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&work_led1>,<&work_led2>,<&work_led3>;
>> +
>> + work_led1 {
>> + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
>> + label = "system_work_led1";
>> + retain-state-suspended;
>> + };
>> +
>> + work_led2 {
>> + gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
>> + label = "system_work_led2";
>> + retain-state-suspended;
>> + };
>> +
>> + work_led3 {
>> + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
>> + label = "system_work_led3";
>> + retain-state-suspended;
>> + };
>> + };
>> +};
>> +
>> +&cpu_l0 {
>> + cpu-supply = <&vdd_cpu_l>;
>> +};
>> +
>> +&cpu_l1 {
>> + cpu-supply = <&vdd_cpu_l>;
>> +};
>> +
>> +&cpu_l2 {
>> + cpu-supply = <&vdd_cpu_l>;
>> +};
>> +
>> +&cpu_l3 {
>> + cpu-supply = <&vdd_cpu_l>;
>> +};
>> +
>> +&cpu_b0 {
>> + cpu-supply = <&vdd_cpu_b>;
>> +};
>> +
>> +&cpu_b1 {
>> + cpu-supply = <&vdd_cpu_b>;
>> +};
>> +
>> +&emmc_phy {
>> + status = "okay";
>> +};
>> +
>> +&i2c0 {
>> + status = "okay";
>> + i2c-scl-rising-time-ns = <180>;
>> + i2c-scl-falling-time-ns = <30>;
>> + clock-frequency = <400000>;
>> +
>> + rk809: pmic@20 {
>> + compatible = "rockchip,rk809";
>> + reg = <0x20>;
>> + interrupt-parent = <&gpio1>;
>> + interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
>> + pinctrl-names = "default", "pmic-sleep",
>> + "pmic-power-off", "pmic-reset";
> Does these pinctrl configs useful other than default?
These pinctrl configs are used for sleep/wake. Since mainline MFD and
pinctrl driver
has no pinctrl support for RK809, these pinctrl configs will be removed
other than default.
>
>> + pinctrl-0 = <&pmic_int_l>;
>> + pinctrl-1 = <&soc_slppin_slp>, <&rk809_slppin_slp>;
>> + pinctrl-2 = <&soc_slppin_gpio>, <&rk809_slppin_pwrdn>;
>> + pinctrl-3 = <&soc_slppin_gpio>,<&rk809_slppin_null>;
>> + rockchip,system-power-controller;
>> + pmic-reset-func = <1>;
>> + wakeup-source;
>> + #clock-cells = <1>;
>> + clock-output-names = "rk808-clkout1", "rk808-clkout2";
>> +
>> + vcc1-supply = <&vcc5v0_sys>;
>> + vcc2-supply = <&vcc5v0_sys>;
>> + vcc3-supply = <&vcc5v0_sys>;
>> + vcc4-supply = <&vcc5v0_sys>;
>> + vcc5-supply = <&vcc_buck5>;
>> + vcc6-supply = <&vcc_buck5>;
>> + vcc7-supply = <&vcc3v3_sys>;
>> + vcc8-supply = <&vcc3v3_sys>;
>> + vcc9-supply = <&vcc5v0_sys>;
>> +
>> + pwrkey {
>> + status = "okay";
> No compatible needed?
No compatible needed. It is RK809 internel implement.
>
>> + };
>> +
>> + rtc {
>> + status = "okay";
> No compatible needed?
ditto.
>
>> + };
>> +
>> + pinctrl_rk8xx: pinctrl_rk8xx {
> Mainline MFD driver has no pinctrl support for RK809.
Yes. This node will be removed.
Thank,
Elon
>
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + rk809_slppin_null: rk809_slppin_null {
>> + pins = "gpio_slp";
>> + function = "pin_fun0";
>> + };
>> +
>> + rk809_slppin_slp: rk809_slppin_slp {
>> + pins = "gpio_slp";
>> + function = "pin_fun1";
>> + };
>> +
>> + rk809_slppin_pwrdn: rk809_slppin_pwrdn {
>> + pins = "gpio_slp";
>> + function = "pin_fun2";
>> + };
>> +
>> + rk809_slppin_rst: rk809_slppin_rst {
>> + pins = "gpio_slp";
>> + function = "pin_fun3";
>> + };
>> + };
>> +
>> + regulators {
>> + vdd_center: DCDC_REG1 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <750000>;
>> + regulator-max-microvolt = <1350000>;
>> + regulator-initial-mode = <0x2>;
>> + regulator-name = "vdd_center";
> Please match the regulator names with schematic.
>
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <900000>;
>> + };
>> + };
>> +
>> + vdd_cpu_l: DCDC_REG2 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <750000>;
>> + regulator-max-microvolt = <1350000>;
>> + regulator-ramp-delay = <6001>;
>> + regulator-initial-mode = <0x2>;
>> + regulator-name = "vdd_cpu_l";
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vcc_ddr: DCDC_REG3 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-name = "vcc_ddr";
>> + regulator-initial-mode = <0x2>;
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + };
>> + };
>> +
>> + vcc3v3_sys: DCDC_REG4 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-initial-mode = <0x2>;
>> + regulator-name = "vcc3v3_sys";
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <3300000>;
>> + };
>> + };
>> +
>> + vcc_buck5: DCDC_REG5 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <2200000>;
>> + regulator-max-microvolt = <2200000>;
>> + regulator-name = "vcc_buck5";
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <2200000>;
>> + };
>> + };
>> +
>> + vcca_0v9: LDO_REG1 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <900000>;
>> + regulator-name = "vcca_0v9";
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vcc_1v8: LDO_REG2 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> +
>> + regulator-name = "vcc_1v8";
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <1800000>;
>> + };
>> + };
>> +
>> + vcc0v9_soc: LDO_REG3 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <900000>;
>> +
>> + regulator-name = "vcc0v9_soc";
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <900000>;
>> + };
>> + };
>> +
>> + vcca_1v8: LDO_REG4 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> +
>> + regulator-name = "vcca_1v8";
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vdd1v5_dvp: LDO_REG5 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1500000>;
>> + regulator-max-microvolt = <1500000>;
>> +
>> + regulator-name = "vdd1v5_dvp";
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vcc_1v5: LDO_REG6 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1500000>;
>> + regulator-max-microvolt = <1500000>;
>> +
>> + regulator-name = "vcc_1v5";
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vcc_3v0: LDO_REG7 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <3000000>;
>> + regulator-max-microvolt = <3000000>;
>> +
>> + regulator-name = "vcc_3v0";
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vccio_sd: LDO_REG8 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <3300000>;
>> +
>> + regulator-name = "vccio_sd";
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <3300000>;
>> + };
>> + };
>> +
>> + vcc_sd: LDO_REG9 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> +
>> + regulator-name = "vcc_sd";
>> + regulator-state-mem {
>> + regulator-on-in-suspend;
>> + regulator-suspend-microvolt = <3300000>;
>> + };
>> + };
>> +
>> + vcc5v0_usb: SWITCH_REG1 {
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> +
>> + regulator-name = "vcc5v0_usb";
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vccio_3v3: SWITCH_REG2 {
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> +
>> + regulator-name = "vccio_3v3";
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> + };
>> + };
>> +
>> + vdd_cpu_b: regulator@1c {
>> + compatible = "fcs,fan53555";
>> + reg = <0x1c>;
>> + vin-supply = <&vcc5v0_sys>;
>> + pinctrl-0 = <&vsel1_gpio>;
>> + vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
>> + regulator-name = "vdd_cpu_b";
>> + regulator-min-microvolt = <712500>;
>> + regulator-max-microvolt = <1500000>;
>> + regulator-ramp-delay = <2300>;
>> + fcs,suspend-voltage-selector = <1>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-initial-state = <3>;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +
>> + vdd_gpu: regulator@10 {
>> + compatible = "fcs,fan53555";
>> + status = "okay";
>> + reg = <0x10>;
>> + vin-supply = <&vcc5v0_sys>;
>> + pinctrl-0 = <&vsel2_gpio>;
>> + vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
>> + regulator-name = "vdd_gpu";
>> + regulator-min-microvolt = <735000>;
>> + regulator-max-microvolt = <1400000>;
>> + regulator-ramp-delay = <2300>;
>> + fcs,suspend-voltage-selector = <1>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + regulator-state-mem {
>> + regulator-off-in-suspend;
>> + };
>> + };
>> +};
>> +
>> +&i2c8 {
>> + status = "okay";
>> + i2c-scl-rising-time-ns = <345>;
>> + i2c-scl-falling-time-ns = <11>;
>> + clock-frequency = <100000>;
>> +};
>> +
>> +&io_domains {
>> + status = "okay";
>> + bt656-supply = <&vcca_1v8>; /* APIO2_VDD */
>> + audio-supply = <&vcca_1v8>; /* APIO5_VDD */
>> + sdmmc-supply = <&vccio_sd>; /* SDMMC0_VDD */
>> + gpio1830-supply = <&vcc_1v8>; /* APIO4_VDD */
>> +};
>> +
>> +&pinctrl {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&npu_ref_clk>;
>> +
>> + leds {
>> + work_led1: work_led1 {
>> + rockchip,pins =
>> + <2 5 RK_FUNC_GPIO &pcfg_pull_none>;
>> + };
>> +
>> + work_led2: work_led2 {
>> + rockchip,pins =
>> + <2 4 RK_FUNC_GPIO &pcfg_pull_none>;
>> + };
>> +
>> + work_led3: work_led3 {
>> + rockchip,pins =
>> + <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
>> + };
>> + };
>> +
>> + npu_clk {
>> + npu_ref_clk: npu-ref-clk {
>> + rockchip,pins =
>> + <0 RK_PA2 1 &pcfg_pull_none>;
>> + };
>> + };
>> +
>> + pmic {
>> + pmic_int_l: pmic-int-l {
>> + rockchip,pins =
>> + <1 RK_PC2 0 &pcfg_pull_up>;
>> + };
>> +
>> + soc_slppin_gpio: soc-slppin-gpio {
>> + rockchip,pins =
>> + <1 RK_PA5 0 &pcfg_output_low>;
>> + };
>> +
>> + soc_slppin_slp: soc-slppin-slp {
>> + rockchip,pins =
>> + <1 RK_PA5 1 &pcfg_pull_down>;
>> + };
>> +
>> + vsel1_gpio: vsel1-gpio {
>> + rockchip,pins =
>> + <1 RK_PC1 0 &pcfg_pull_down>;
>> + };
>> +
>> + vsel2_gpio: vsel2-gpio {
>> + rockchip,pins =
>> + <1 RK_PB6 0 &pcfg_pull_down>;
>> + };
>> + };
>> +
>> + usb3 {
>> + usb3_host_en: usb3-host-en {
>> + rockchip,pins =
>> + <2 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
>> + };
>> + };
>> +};
>> +
>> +&pmu_io_domains {
>> + status = "okay";
>> + pmu1830-supply = <&vcc_1v8>;
>> +};
>> +
>> +&pwm0 {
>> + status = "okay";
>> +};
>> +
>> +&pwm2 {
>> + status = "okay";
>> +};
>> +
>> +&saradc {
>> + status = "okay";
>> + vref-supply = <&vcc_1v8>;
>> +};
>> +
>> +&sdhci {
>> + bus-width = <8>;
>> + mmc-hs400-1_8v;
>> + non-removable;
>> + keep-power-in-suspend;
>> + mmc-hs400-enhanced-strobe;
>> + status = "okay";
>> +};
>> +
>> +&tcphy1 {
> No tcphy0? I can see this used in schematics.
>
>> + status = "okay";
>> +};
>> +
>> +&tsadc {
>> + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
>> + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
>> + status = "okay";
>> +};
>> +
>> +&u2phy1 {
> No u2phy0?
>
>> + status = "okay";
>> +
>> + u2phy1_otg: otg-port {
>> + status = "okay";
>> + };
>> +
>> + u2phy1_host: host-port {
>> + phy-supply = <&vcc5v0_usb>;
>> + status = "okay";
>> + };
>> +};
>> +
>> +&uart0 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&uart0_xfer &uart0_cts>;
>> + status = "okay";
>> +};
>> +
>> +&uart2 {
>> + status = "okay";
>> +};
>> +
>> +&uart4 {
>> + status = "okay";
>> +};
>> +
>> +&usb_host0_ehci {
>> + status = "okay";
>> +};
>> +
>> +&usb_host1_ehci {
>> + status = "okay";
>> +};
>> +
>> +&usb_host0_ohci {
>> + status = "okay";
>> +};
>> +
>> +&usb_host1_ohci {
>> + status = "okay";
>> +};
>> +
>> +&usbdrd3_1 {
>> + status = "okay";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&usb3_host_en>;
>> +};
>> +
>> +&usbdrd_dwc3_0 {
> No usbdrd3_0?
>
> Thanks,
> Mani
>
>> + status = "okay";
>> +};
>> +
>> +&usbdrd_dwc3_1 {
>> + snps,dis-u3-autosuspend-quirk;
>> + status = "okay";
>> +};
>> +
>> --
>> 2.17.1
>>
>>
>>
>
>
Hi Elon,
Am Montag, 5. August 2019, 03:57:55 CEST schrieb Elon Zhang:
> Add devicetree support for RK3399Pro TB-96AI board, one of
> the 96Boards family.
>
> The TB-96AI board is a 96Boards Compute SOM design, launched
> by Linaro, Rockchip and Beiqicloud.
>
> More information can be obtained from the following websites:
> 1.https://www.96boards.org/product/tb-96ai/
> 2.http://t.rock-chips.com/
> 3.http://www.beiqicloud.com/
>
> This patch add basic node for the board and support booting up
> to Fedora.
>
> Signed-off-by: Elon Zhang <[email protected]>
> ---
> changes since v1:
> - remove needless node
> - using a standard LED formats for 96Boards
>
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../boot/dts/rockchip/rk3399pro-tb-96ai.dts | 560 ++++++++++++++++++
> 2 files changed, 561 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 5f2687acbf94..3d6c8d4363b5 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -27,3 +27,4 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-tb-96ai.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
> new file mode 100644
> index 000000000000..767b37b854ba
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-tb-96ai.dts
> @@ -0,0 +1,560 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
> + */
> +
> +/dts-v1/;
> +#include "rk3399pro.dtsi"
> +#include "rk3399-opp.dtsi"
> +
> +/ {
> + compatible = "beiqi,rk3399pro-tb-96ai", "rockchip,rk3399pro";
> +
> + chosen {
> + stdout-path = "serial2:1500000n8";
> + };
> +
> + xin32k: xin32k {
> + compatible = "fixed-clock";
> + clock-frequency = <32768>;
> + clock-output-names = "xin32k";
> + #clock-cells = <0>;
> + };
I would guess this 32kHz clock does originate from the rk809 below?
If so please simply adjust the clock-output-names in it, so that
it sources correctly.
> +
> + vcc5v0_sys: vccsys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc5v0_sys";
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + };
Please always try to construct a full regulator tree.
(see debugfs/regulator/regulator_summary)
Part of me doesn't want to believe that vcc5v0_sys is
the root regulator getting the outside power supply ;-) .
> +
> + leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&work_led1>,<&work_led2>,<&work_led3>;
> +
> + work_led1 {
> + gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
> + label = "system_work_led1";
> + retain-state-suspended;
> + };
> +
> + work_led2 {
> + gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
> + label = "system_work_led2";
> + retain-state-suspended;
> + };
> +
> + work_led3 {
> + gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
> + label = "system_work_led3";
> + retain-state-suspended;
> + };
> + };
> +};
> +
> +&cpu_l0 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l1 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l2 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_l3 {
> + cpu-supply = <&vdd_cpu_l>;
> +};
> +
> +&cpu_b0 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&cpu_b1 {
> + cpu-supply = <&vdd_cpu_b>;
> +};
> +
> +&emmc_phy {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> + i2c-scl-rising-time-ns = <180>;
> + i2c-scl-falling-time-ns = <30>;
> + clock-frequency = <400000>;
> +
> + rk809: pmic@20 {
> + compatible = "rockchip,rk809";
> + reg = <0x20>;
> + interrupt-parent = <&gpio1>;
> + interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default", "pmic-sleep",
> + "pmic-power-off", "pmic-reset";
> + pinctrl-0 = <&pmic_int_l>;
> + pinctrl-1 = <&soc_slppin_slp>, <&rk809_slppin_slp>;
> + pinctrl-2 = <&soc_slppin_gpio>, <&rk809_slppin_pwrdn>;
> + pinctrl-3 = <&soc_slppin_gpio>,<&rk809_slppin_null>;
> + rockchip,system-power-controller;
> + pmic-reset-func = <1>;
That is not part of the binding I think
> + wakeup-source;
> + #clock-cells = <1>;
> + clock-output-names = "rk808-clkout1", "rk808-clkout2";
> +
> + vcc1-supply = <&vcc5v0_sys>;
> + vcc2-supply = <&vcc5v0_sys>;
> + vcc3-supply = <&vcc5v0_sys>;
> + vcc4-supply = <&vcc5v0_sys>;
> + vcc5-supply = <&vcc_buck5>;
> + vcc6-supply = <&vcc_buck5>;
> + vcc7-supply = <&vcc3v3_sys>;
> + vcc8-supply = <&vcc3v3_sys>;
> + vcc9-supply = <&vcc5v0_sys>;
> +
> + pwrkey {
> + status = "okay";
> + };
> +
> + rtc {
> + status = "okay";
> + };
There is no binding for either pwrkey nor rtc subnodes and
I think the rtc device is just created in any case, so you should just
drop these nodes.
> + pinctrl_rk8xx: pinctrl_rk8xx {
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + rk809_slppin_null: rk809_slppin_null {
> + pins = "gpio_slp";
> + function = "pin_fun0";
> + };
> +
> + rk809_slppin_slp: rk809_slppin_slp {
> + pins = "gpio_slp";
> + function = "pin_fun1";
> + };
> +
> + rk809_slppin_pwrdn: rk809_slppin_pwrdn {
> + pins = "gpio_slp";
> + function = "pin_fun2";
> + };
> +
> + rk809_slppin_rst: rk809_slppin_rst {
> + pins = "gpio_slp";
> + function = "pin_fun3";
> + };
> + };
There is a binding for rk805 pinctrl, but it looks way different than this.
Please adapt and if necessary submit binding+code for rk809 first.
See Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
for reference.
> + regulators {
> + vdd_center: DCDC_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-initial-mode = <0x2>;
> + regulator-name = "vdd_center";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <900000>;
> + };
> + };
> +
> + vdd_cpu_l: DCDC_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-ramp-delay = <6001>;
> + regulator-initial-mode = <0x2>;
> + regulator-name = "vdd_cpu_l";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-name = "vcc_ddr";
> + regulator-initial-mode = <0x2>;
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc3v3_sys: DCDC_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-initial-mode = <0x2>;
> + regulator-name = "vcc3v3_sys";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_buck5: DCDC_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <2200000>;
> + regulator-max-microvolt = <2200000>;
> + regulator-name = "vcc_buck5";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <2200000>;
> + };
> + };
> +
> + vcca_0v9: LDO_REG1 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> + regulator-name = "vcca_0v9";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v8: LDO_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-name = "vcc_1v8";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vcc0v9_soc: LDO_REG3 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <900000>;
> + regulator-max-microvolt = <900000>;
> +
> + regulator-name = "vcc0v9_soc";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <900000>;
> + };
> + };
> +
> + vcca_1v8: LDO_REG4 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + regulator-name = "vcca_1v8";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd1v5_dvp: LDO_REG5 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> +
> + regulator-name = "vdd1v5_dvp";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_1v5: LDO_REG6 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1500000>;
> + regulator-max-microvolt = <1500000>;
> +
> + regulator-name = "vcc_1v5";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vcc_3v0: LDO_REG7 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> +
> + regulator-name = "vcc_3v0";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vccio_sd: LDO_REG8 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-name = "vccio_sd";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_sd: LDO_REG9 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-name = "vcc_sd";
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc5v0_usb: SWITCH_REG1 {
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> +
> + regulator-name = "vcc5v0_usb";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vccio_3v3: SWITCH_REG2 {
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-name = "vccio_3v3";
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> + };
> + };
> +
> + vdd_cpu_b: regulator@1c {
> + compatible = "fcs,fan53555";
> + reg = <0x1c>;
> + vin-supply = <&vcc5v0_sys>;
> + pinctrl-0 = <&vsel1_gpio>;
> + vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
I don't think there is a vsel-gpios propety specified yet and the
fan53555 driver cannot handle that pin yet.
You could change that ;-)
> + regulator-name = "vdd_cpu_b";
> + regulator-min-microvolt = <712500>;
> + regulator-max-microvolt = <1500000>;
> + regulator-ramp-delay = <2300>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-initial-state = <3>;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +
> + vdd_gpu: regulator@10 {
> + compatible = "fcs,fan53555";
> + status = "okay";
> + reg = <0x10>;
> + vin-supply = <&vcc5v0_sys>;
> + pinctrl-0 = <&vsel2_gpio>;
> + vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
> + regulator-name = "vdd_gpu";
> + regulator-min-microvolt = <735000>;
> + regulator-max-microvolt = <1400000>;
> + regulator-ramp-delay = <2300>;
> + fcs,suspend-voltage-selector = <1>;
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + };
> + };
> +};
> +
> +&i2c8 {
> + status = "okay";
> + i2c-scl-rising-time-ns = <345>;
> + i2c-scl-falling-time-ns = <11>;
> + clock-frequency = <100000>;
> +};
> +
> +&io_domains {
> + status = "okay";
> + bt656-supply = <&vcca_1v8>; /* APIO2_VDD */
> + audio-supply = <&vcca_1v8>; /* APIO5_VDD */
> + sdmmc-supply = <&vccio_sd>; /* SDMMC0_VDD */
> + gpio1830-supply = <&vcc_1v8>; /* APIO4_VDD */
> +};
> +
> +&pinctrl {
> + pinctrl-names = "default";
> + pinctrl-0 = <&npu_ref_clk>;
> +
> + leds {
> + work_led1: work_led1 {
> + rockchip,pins =
> + <2 5 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + work_led2: work_led2 {
> + rockchip,pins =
> + <2 4 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> +
> + work_led3: work_led3 {
> + rockchip,pins =
> + <2 3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + npu_clk {
> + npu_ref_clk: npu-ref-clk {
> + rockchip,pins =
> + <0 RK_PA2 1 &pcfg_pull_none>;
> + };
> + };
> +
> + pmic {
> + pmic_int_l: pmic-int-l {
> + rockchip,pins =
> + <1 RK_PC2 0 &pcfg_pull_up>;
> + };
> +
> + soc_slppin_gpio: soc-slppin-gpio {
> + rockchip,pins =
> + <1 RK_PA5 0 &pcfg_output_low>;
> + };
> +
> + soc_slppin_slp: soc-slppin-slp {
> + rockchip,pins =
> + <1 RK_PA5 1 &pcfg_pull_down>;
> + };
> +
> + vsel1_gpio: vsel1-gpio {
> + rockchip,pins =
> + <1 RK_PC1 0 &pcfg_pull_down>;
> + };
> +
> + vsel2_gpio: vsel2-gpio {
> + rockchip,pins =
> + <1 RK_PB6 0 &pcfg_pull_down>;
> + };
> + };
> +
> + usb3 {
> + usb3_host_en: usb3-host-en {
> + rockchip,pins =
> + <2 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
> + };
> + };
> +};
> +
> +&pmu_io_domains {
> + status = "okay";
> + pmu1830-supply = <&vcc_1v8>;
> +};
> +
> +&pwm0 {
> + status = "okay";
> +};
> +
> +&pwm2 {
> + status = "okay";
> +};
> +
> +&saradc {
> + status = "okay";
> + vref-supply = <&vcc_1v8>;
> +};
> +
> +&sdhci {
> + bus-width = <8>;
> + mmc-hs400-1_8v;
> + non-removable;
> + keep-power-in-suspend;
> + mmc-hs400-enhanced-strobe;
> + status = "okay";
> +};
> +
> +&tcphy1 {
> + status = "okay";
> +};
> +
> +&tsadc {
> + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
> + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
> + status = "okay";
> +};
> +
> +&u2phy1 {
> + status = "okay";
> +
> + u2phy1_otg: otg-port {
> + status = "okay";
> + };
> +
> + u2phy1_host: host-port {
> + phy-supply = <&vcc5v0_usb>;
> + status = "okay";
> + };
> +};
> +
> +&uart0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_xfer &uart0_cts>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart4 {
> + status = "okay";
> +};
> +
> +&usb_host0_ehci {
> + status = "okay";
> +};
> +
> +&usb_host1_ehci {
> + status = "okay";
> +};
> +
> +&usb_host0_ohci {
> + status = "okay";
> +};
> +
> +&usb_host1_ohci {
> + status = "okay";
> +};
> +
> +&usbdrd3_1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb3_host_en>;
> +};
> +
> +&usbdrd_dwc3_0 {
> + status = "okay";
> +};
> +
> +&usbdrd_dwc3_1 {
> + snps,dis-u3-autosuspend-quirk;
This property is neither part of the dwc3 driver,
nor the dwc3 devicetree binding.
> + status = "okay";
> +};
> +
>
Heiko