As commit 30d8177e8ac7 ("bonding: Always enable vlan tx offload")
said, we should always enable bonding's vlan tx offload, pass the
vlan packets to the slave devices with vlan tci, let them to handle
vlan implementation.
Now if encapsulation protocols like VXLAN is used, skb->encapsulation
may be set, then the packet is passed to vlan devicec which based on
bonding device. However in netif_skb_features(), the check of
hw_enc_features:
if (skb->encapsulation)
features &= dev->hw_enc_features;
clears NETIF_F_HW_VLAN_CTAG_TX/NETIF_F_HW_VLAN_STAG_TX. This results
in same issue in commit 30d8177e8ac7 like this:
vlan_dev_hard_start_xmit
-->dev_queue_xmit
-->validate_xmit_skb
-->netif_skb_features //NETIF_F_HW_VLAN_CTAG_TX is cleared
-->validate_xmit_vlan
-->__vlan_hwaccel_push_inside //skb->tci is cleared
...
--> bond_start_xmit
--> bond_xmit_hash //BOND_XMIT_POLICY_ENCAP34
--> __skb_flow_dissect // nhoff point to IP header
--> case htons(ETH_P_8021Q)
// skb_vlan_tag_present is false, so
vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan),
//vlan point to ip header wrongly
Signed-off-by: YueHaibing <[email protected]>
---
drivers/net/bonding/bond_main.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 02fd782..931d9d9 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1126,6 +1126,8 @@ static void bond_compute_features(struct bonding *bond)
done:
bond_dev->vlan_features = vlan_features;
bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL |
+ NETIF_F_HW_VLAN_CTAG_TX |
+ NETIF_F_HW_VLAN_STAG_TX |
NETIF_F_GSO_UDP_L4;
bond_dev->mpls_features = mpls_features;
bond_dev->gso_max_segs = gso_max_segs;
--
2.7.4
YueHaibing <[email protected]> wrote:
>As commit 30d8177e8ac7 ("bonding: Always enable vlan tx offload")
>said, we should always enable bonding's vlan tx offload, pass the
>vlan packets to the slave devices with vlan tci, let them to handle
>vlan implementation.
>
>Now if encapsulation protocols like VXLAN is used, skb->encapsulation
>may be set, then the packet is passed to vlan devicec which based on
Typo: "devicec"
>bonding device. However in netif_skb_features(), the check of
>hw_enc_features:
>
> if (skb->encapsulation)
> features &= dev->hw_enc_features;
>
>clears NETIF_F_HW_VLAN_CTAG_TX/NETIF_F_HW_VLAN_STAG_TX. This results
>in same issue in commit 30d8177e8ac7 like this:
>
>vlan_dev_hard_start_xmit
> -->dev_queue_xmit
> -->validate_xmit_skb
> -->netif_skb_features //NETIF_F_HW_VLAN_CTAG_TX is cleared
> -->validate_xmit_vlan
> -->__vlan_hwaccel_push_inside //skb->tci is cleared
>...
> --> bond_start_xmit
> --> bond_xmit_hash //BOND_XMIT_POLICY_ENCAP34
> --> __skb_flow_dissect // nhoff point to IP header
> --> case htons(ETH_P_8021Q)
> // skb_vlan_tag_present is false, so
> vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan),
> //vlan point to ip header wrongly
>
>Signed-off-by: YueHaibing <[email protected]>
Looks good to me; should this be tagged with
Fixes: 278339a42a1b ("bonding: propogate vlan_features to bonding master")
as 30d8177e8ac7 was? If not, is there an appropriate commit id?
Acked-by: Jay Vosburgh <[email protected]>
-J
>---
> drivers/net/bonding/bond_main.c | 2 ++
> 1 file changed, 2 insertions(+)
>
>diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
>index 02fd782..931d9d9 100644
>--- a/drivers/net/bonding/bond_main.c
>+++ b/drivers/net/bonding/bond_main.c
>@@ -1126,6 +1126,8 @@ static void bond_compute_features(struct bonding *bond)
> done:
> bond_dev->vlan_features = vlan_features;
> bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL |
>+ NETIF_F_HW_VLAN_CTAG_TX |
>+ NETIF_F_HW_VLAN_STAG_TX |
> NETIF_F_GSO_UDP_L4;
> bond_dev->mpls_features = mpls_features;
> bond_dev->gso_max_segs = gso_max_segs;
>--
>2.7.4
---
-Jay Vosburgh, [email protected]
On 2019/8/6 21:41, Jay Vosburgh wrote:
> YueHaibing <[email protected]> wrote:
>
>> As commit 30d8177e8ac7 ("bonding: Always enable vlan tx offload")
>> said, we should always enable bonding's vlan tx offload, pass the
>> vlan packets to the slave devices with vlan tci, let them to handle
>> vlan implementation.
>>
>> Now if encapsulation protocols like VXLAN is used, skb->encapsulation
>> may be set, then the packet is passed to vlan devicec which based on
>
> Typo: "devicec"
oh, yes, thanks!
>
>> bonding device. However in netif_skb_features(), the check of
>> hw_enc_features:
>>
>> if (skb->encapsulation)
>> features &= dev->hw_enc_features;
>>
>> clears NETIF_F_HW_VLAN_CTAG_TX/NETIF_F_HW_VLAN_STAG_TX. This results
>> in same issue in commit 30d8177e8ac7 like this:
>>
>> vlan_dev_hard_start_xmit
>> -->dev_queue_xmit
>> -->validate_xmit_skb
>> -->netif_skb_features //NETIF_F_HW_VLAN_CTAG_TX is cleared
>> -->validate_xmit_vlan
>> -->__vlan_hwaccel_push_inside //skb->tci is cleared
>> ...
>> --> bond_start_xmit
>> --> bond_xmit_hash //BOND_XMIT_POLICY_ENCAP34
>> --> __skb_flow_dissect // nhoff point to IP header
>> --> case htons(ETH_P_8021Q)
>> // skb_vlan_tag_present is false, so
>> vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan),
>> //vlan point to ip header wrongly
>>
>> Signed-off-by: YueHaibing <[email protected]>
>
> Looks good to me; should this be tagged with
>
> Fixes: 278339a42a1b ("bonding: propogate vlan_features to bonding master")
>
> as 30d8177e8ac7 was? If not, is there an appropriate commit id?
It seems the commit was:
Fixes: b2a103e6d0af ("bonding: convert to ndo_fix_features")
>
> Acked-by: Jay Vosburgh <[email protected]>
Thanks, will send v2.
>
> -J
>
>> ---
>> drivers/net/bonding/bond_main.c | 2 ++
>> 1 file changed, 2 insertions(+)
>>
>> diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
>> index 02fd782..931d9d9 100644
>> --- a/drivers/net/bonding/bond_main.c
>> +++ b/drivers/net/bonding/bond_main.c
>> @@ -1126,6 +1126,8 @@ static void bond_compute_features(struct bonding *bond)
>> done:
>> bond_dev->vlan_features = vlan_features;
>> bond_dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL |
>> + NETIF_F_HW_VLAN_CTAG_TX |
>> + NETIF_F_HW_VLAN_STAG_TX |
>> NETIF_F_GSO_UDP_L4;
>> bond_dev->mpls_features = mpls_features;
>> bond_dev->gso_max_segs = gso_max_segs;
>> --
>> 2.7.4
>
> ---
> -Jay Vosburgh, [email protected]
>
> .
>