Hi,
The main purpose of this patch series is to add coupled regulators for
Exynos5422/5800 to keep constrain on voltage difference between vdd_arm
and vdd_int to be at most 300mV. In exynos-bus instead of using
regulator_set_voltage_tol() with default voltage tolerance it should be
used regulator_set_voltage_triplet() with volatege range, and this is
already present in opp/core.c code, so it can be reused. While at this,
move setting regulators into opp/core.
This patchset was tested on Odroid XU3.
The DTS coupled regulators patch depends on previous patches.
Changes:
v5:
- squashed last patch "remove exynos_bus_passive_target()" into second
- added Acked-by to patch "correct clock enable sequence"
v4:
- removed "opp: core: add regulators enable and disable" from patchset
as it was applied by Viresh Kumar and changed cover letter
- fix patch "devfreq: exynos-bus: correct clock enable sequence" to
correct order of enable/disable
- removed unrelated changes in "devfreq: exynos-bus: convert to use
dev_pm_opp_set_rate()"
- added new patch "devfreq: exynos-bus: remove exynos_bus_passive_target()"
as suggested by Chanwoo Choi
v3:
- added new exynos-bus patch to correct clock and regulator enabling
and disabling sequence as suggested by Chanwoo Choi
- corrected error path in enable and improved commit message in opp/core
- improve comment in devfreq/exynos-bus.c before devfreq_recommended_opp()
- change cover letter as there is new patch
- added note before Signed-off-by in 4th patch
v2:
- improve regulators enable/disable code in opp/core as suggested by
Viresh Kumar
- add new patch for remove unused dt-bindings as suggested by Krzysztof
Kozlowski
Kamil Konieczny (3):
devfreq: exynos-bus: correct clock enable sequence
devfreq: exynos-bus: convert to use dev_pm_opp_set_rate()
dt-bindings: devfreq: exynos-bus: remove unused property
Marek Szyprowski (1):
ARM: dts: exynos: add initial data for coupled regulators for
Exynos5422/5800
.../bindings/devfreq/exynos-bus.txt | 2 -
arch/arm/boot/dts/exynos5420.dtsi | 34 ++--
arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 4 +
arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 +
arch/arm/boot/dts/exynos5800.dtsi | 32 ++--
drivers/devfreq/exynos-bus.c | 153 +++++-------------
6 files changed, 78 insertions(+), 151 deletions(-)
--
2.22.0
Hi Kamil,
When I applied them to testing branch, those don't have the author name
only just have the email address as following:
You have to edit the your git author information with your name.
author [email protected] <[email protected]> 2019-08-07 15:38:36 +0200
committer Chanwoo Choi <[email protected]> 2019-08-08 10:35:16 +0900
commit 4304f4ecec93cebd255463d56b0a4f112ee9dc50 (patch)
tree 2859e566d6f68219f71a61e7c412717c1adba4f5
parent 57d85421038b458dd87ec268404ff608f90c36ae (diff)
download linux-4304f4ecec93cebd255463d56b0a4f112ee9dc50.tar.gz
Regards,
Chanwoo Choi
On 19. 8. 7. 오후 10:38, [email protected] wrote:
> Hi,
>
> The main purpose of this patch series is to add coupled regulators for
> Exynos5422/5800 to keep constrain on voltage difference between vdd_arm
> and vdd_int to be at most 300mV. In exynos-bus instead of using
> regulator_set_voltage_tol() with default voltage tolerance it should be
> used regulator_set_voltage_triplet() with volatege range, and this is
> already present in opp/core.c code, so it can be reused. While at this,
> move setting regulators into opp/core.
>
> This patchset was tested on Odroid XU3.
>
> The DTS coupled regulators patch depends on previous patches.
>
> Changes:
> v5:
> - squashed last patch "remove exynos_bus_passive_target()" into second
> - added Acked-by to patch "correct clock enable sequence"
> v4:
> - removed "opp: core: add regulators enable and disable" from patchset
> as it was applied by Viresh Kumar and changed cover letter
> - fix patch "devfreq: exynos-bus: correct clock enable sequence" to
> correct order of enable/disable
> - removed unrelated changes in "devfreq: exynos-bus: convert to use
> dev_pm_opp_set_rate()"
> - added new patch "devfreq: exynos-bus: remove exynos_bus_passive_target()"
> as suggested by Chanwoo Choi
> v3:
> - added new exynos-bus patch to correct clock and regulator enabling
> and disabling sequence as suggested by Chanwoo Choi
> - corrected error path in enable and improved commit message in opp/core
> - improve comment in devfreq/exynos-bus.c before devfreq_recommended_opp()
> - change cover letter as there is new patch
> - added note before Signed-off-by in 4th patch
> v2:
> - improve regulators enable/disable code in opp/core as suggested by
> Viresh Kumar
> - add new patch for remove unused dt-bindings as suggested by Krzysztof
> Kozlowski
>
> Kamil Konieczny (3):
> devfreq: exynos-bus: correct clock enable sequence
> devfreq: exynos-bus: convert to use dev_pm_opp_set_rate()
> dt-bindings: devfreq: exynos-bus: remove unused property
>
> Marek Szyprowski (1):
> ARM: dts: exynos: add initial data for coupled regulators for
> Exynos5422/5800
>
> .../bindings/devfreq/exynos-bus.txt | 2 -
> arch/arm/boot/dts/exynos5420.dtsi | 34 ++--
> arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 4 +
> arch/arm/boot/dts/exynos5800-peach-pi.dts | 4 +
> arch/arm/boot/dts/exynos5800.dtsi | 32 ++--
> drivers/devfreq/exynos-bus.c | 153 +++++-------------
> 6 files changed, 78 insertions(+), 151 deletions(-)
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
Hi Chanwoo,
On 08.08.2019 03:47, Chanwoo Choi wrote:
> Hi Kamil,
>
> When I applied them to testing branch, those don't have the author name
> only just have the email address as following:
> You have to edit the your git author information with your name.
Sorry, I will resend with proper From: info.
> author [email protected] <[email protected]> 2019-08-07 15:38:36 +0200
> committer Chanwoo Choi <[email protected]> 2019-08-08 10:35:16 +0900
> commit 4304f4ecec93cebd255463d56b0a4f112ee9dc50 (patch)
> tree 2859e566d6f68219f71a61e7c412717c1adba4f5
> parent 57d85421038b458dd87ec268404ff608f90c36ae (diff)
> download linux-4304f4ecec93cebd255463d56b0a4f112ee9dc50.tar.gz
>
> Regards,
> Chanwoo Choi
>
> On 19. 8. 7. 오후 10:38, [email protected] wrote:
>> [...]
--
Best regards,
Kamil Konieczny
Samsung R&D Institute Poland