This is the start of the stable review cycle for the 4.19.66 release.
There are 45 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Sat 10 Aug 2019 07:03:19 PM UTC.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.66-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.19.66-rc1
Lukas Wunner <[email protected]>
spi: bcm2835: Fix 3-wire mode if DMA is enabled
Tejun Heo <[email protected]>
cgroup: Fix css_task_iter_advance_css_set() cset skip condition
Tejun Heo <[email protected]>
cgroup: css_task_iter_skip()'d iterators must be advanced before accessed
Tejun Heo <[email protected]>
cgroup: Include dying leaders with live threads in PROCS iterations
Tejun Heo <[email protected]>
cgroup: Implement css_task_iter_skip()
Tejun Heo <[email protected]>
cgroup: Call cgroup_release() before __exit_signal()
Arnd Bergmann <[email protected]>
compat_ioctl: pppoe: fix PPPOEIOCSFWD handling
Heiner Kallweit <[email protected]>
r8169: don't use MSI before RTL8168d
Ariel Levkovich <[email protected]>
net/mlx5e: Prevent encap flow counter update async to user query
Edward Srouji <[email protected]>
net/mlx5: Fix modify_cq_in alignment
Alexis Bauvin <[email protected]>
tun: mark small packets as owned by the tap sock
Taras Kondratiuk <[email protected]>
tipc: compat: allow tipc commands without arguments
Claudiu Manoil <[email protected]>
ocelot: Cancel delayed work before wq destruction
Johan Hovold <[email protected]>
NFC: nfcmrvl: fix gpio-handling regression
Ursula Braun <[email protected]>
net/smc: do not schedule tx_work in SMC_CLOSED state
Dmytro Linkin <[email protected]>
net: sched: use temporary variable for actions indexes
Roman Mashak <[email protected]>
net sched: update vlan action for batched events operations
Jia-Ju Bai <[email protected]>
net: sched: Fix a possible null-pointer dereference in dequeue_func()
Subash Abhinov Kasiviswanathan <[email protected]>
net: qualcomm: rmnet: Fix incorrect UL checksum offload logic
René van Dorst <[email protected]>
net: phylink: Fix flow control for fixed-link
Mark Zhang <[email protected]>
net/mlx5: Use reversed order when unregister devices
Qian Cai <[email protected]>
net/mlx5e: always initialize frag->last_in_page
Jiri Pirko <[email protected]>
net: fix ifindex collision during namespace removal
Nikolay Aleksandrov <[email protected]>
net: bridge: mcast: don't delete permanent entries when fast leave is enabled
Nikolay Aleksandrov <[email protected]>
net: bridge: delete local fdb on device init failure
Matteo Croce <[email protected]>
mvpp2: refactor MTU change code
Matteo Croce <[email protected]>
mvpp2: fix panic on module removal
Jiri Pirko <[email protected]>
mlxsw: spectrum: Fix error path in mlxsw_sp_module_init()
Haishuang Yan <[email protected]>
ipip: validate header length in ipip_tunnel_xmit
Haishuang Yan <[email protected]>
ip6_tunnel: fix possible use-after-free on xmit
Haishuang Yan <[email protected]>
ip6_gre: reload ipv6h in prepare_ip6gre_xmit_ipv6
Cong Wang <[email protected]>
ife: error out when nla attributes are empty
Sudarsana Reddy Kalluru <[email protected]>
bnx2x: Disable multi-cos feature.
Gustavo A. R. Silva <[email protected]>
atm: iphase: Fix Spectre v1 vulnerability
Greg Kroah-Hartman <[email protected]>
IB: directly cast the sockaddr union to aockaddr
Sebastian Parschauer <[email protected]>
HID: Add quirk for HP X1200 PIXART OEM mouse
Aaron Armstrong Skomra <[email protected]>
HID: wacom: fix bit shift for Cintiq Companion 2
Dan Williams <[email protected]>
libnvdimm/bus: Fix wait_nvdimm_bus_probe_idle() ABBA deadlock
Dan Williams <[email protected]>
libnvdimm/bus: Prepare the nd_ioctl() path to be re-entrant
Dan Williams <[email protected]>
libnvdimm/region: Register badblocks before namespaces
Dan Williams <[email protected]>
libnvdimm/bus: Prevent duplicate device_unregister() calls
Dan Williams <[email protected]>
drivers/base: Introduce kill_device()
Alexander Duyck <[email protected]>
driver core: Establish order of operations for device_add and device_del via bitflag
Linus Torvalds <[email protected]>
gcc-9: don't warn about uninitialized variable
Hannes Reinecke <[email protected]>
scsi: fcoe: Embed fc_rport_priv in fcoe_rport structure
-------------
Diffstat:
Makefile | 4 +-
drivers/atm/iphase.c | 8 +-
drivers/base/base.h | 4 +
drivers/base/core.c | 22 +++++
drivers/base/dd.c | 22 ++---
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-quirks.c | 1 +
drivers/hid/wacom_wac.c | 12 +--
drivers/i2c/i2c-core-base.c | 2 +-
drivers/infiniband/core/sa_query.c | 9 +-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 3 +-
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 46 +++------
drivers/net/ethernet/mellanox/mlx5/core/dev.c | 2 +-
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 5 +-
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 4 +-
.../net/ethernet/mellanox/mlx5/core/fs_counters.c | 5 +
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 2 +-
drivers/net/ethernet/mscc/ocelot.c | 1 +
drivers/net/ethernet/qualcomm/rmnet/rmnet_map.h | 2 +-
.../net/ethernet/qualcomm/rmnet/rmnet_map_data.c | 13 ++-
drivers/net/ethernet/realtek/r8169.c | 9 +-
drivers/net/phy/phylink.c | 2 +
drivers/net/ppp/pppoe.c | 3 +
drivers/net/ppp/pppox.c | 13 +++
drivers/net/ppp/pptp.c | 3 +
drivers/net/tun.c | 1 +
drivers/nfc/nfcmrvl/main.c | 4 +-
drivers/nfc/nfcmrvl/uart.c | 4 +-
drivers/nfc/nfcmrvl/usb.c | 1 +
drivers/nvdimm/bus.c | 98 +++++++++++++------
drivers/nvdimm/region.c | 22 ++---
drivers/nvdimm/region_devs.c | 4 +
drivers/scsi/fcoe/fcoe_ctlr.c | 51 ++++------
drivers/scsi/libfc/fc_rport.c | 5 +-
drivers/spi/spi-bcm2835.c | 3 +-
fs/compat_ioctl.c | 3 -
include/linux/cgroup-defs.h | 1 +
include/linux/cgroup.h | 4 +
include/linux/device.h | 1 +
include/linux/if_pppox.h | 3 +
include/linux/mlx5/fs.h | 1 +
include/linux/mlx5/mlx5_ifc.h | 7 +-
include/scsi/libfcoe.h | 1 +
kernel/cgroup/cgroup.c | 106 +++++++++++++++------
kernel/exit.c | 2 +-
net/bridge/br_multicast.c | 3 +
net/bridge/br_vlan.c | 5 +
net/core/dev.c | 2 +
net/ipv4/ipip.c | 3 +
net/ipv6/ip6_gre.c | 3 +-
net/ipv6/ip6_tunnel.c | 6 +-
net/l2tp/l2tp_ppp.c | 3 +
net/sched/act_bpf.c | 9 +-
net/sched/act_connmark.c | 9 +-
net/sched/act_csum.c | 9 +-
net/sched/act_gact.c | 8 +-
net/sched/act_ife.c | 13 ++-
net/sched/act_mirred.c | 13 +--
net/sched/act_nat.c | 9 +-
net/sched/act_pedit.c | 10 +-
net/sched/act_police.c | 8 +-
net/sched/act_sample.c | 10 +-
net/sched/act_simple.c | 10 +-
net/sched/act_skbedit.c | 11 ++-
net/sched/act_skbmod.c | 11 ++-
net/sched/act_tunnel_key.c | 8 +-
net/sched/act_vlan.c | 25 +++--
net/sched/sch_codel.c | 6 +-
net/smc/af_smc.c | 8 +-
net/tipc/netlink_compat.c | 11 ++-
70 files changed, 471 insertions(+), 262 deletions(-)
From: Haishuang Yan <[email protected]>
[ Upstream commit 47d858d0bdcd47cc1c6c9eeca91b091dd9e55637 ]
We need the same checks introduced by commit cb9f1b783850
("ip: validate header length on virtual device xmit") for
ipip tunnel.
Fixes: cb9f1b783850b ("ip: validate header length on virtual device xmit")
Signed-off-by: Haishuang Yan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv4/ipip.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -281,6 +281,9 @@ static netdev_tx_t ipip_tunnel_xmit(stru
const struct iphdr *tiph = &tunnel->parms.iph;
u8 ipproto;
+ if (!pskb_inet_may_pull(skb))
+ goto tx_error;
+
switch (skb->protocol) {
case htons(ETH_P_IP):
ipproto = IPPROTO_IPIP;
From: Roman Mashak <[email protected]>
[ Upstream commit b35475c5491a14c8ce7a5046ef7bcda8a860581a ]
Add get_fill_size() routine used to calculate the action size
when building a batch of events.
Fixes: c7e2b9689 ("sched: introduce vlan action")
Signed-off-by: Roman Mashak <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/act_vlan.c | 9 +++++++++
1 file changed, 9 insertions(+)
--- a/net/sched/act_vlan.c
+++ b/net/sched/act_vlan.c
@@ -296,6 +296,14 @@ static int tcf_vlan_search(struct net *n
return tcf_idr_search(tn, a, index);
}
+static size_t tcf_vlan_get_fill_size(const struct tc_action *act)
+{
+ return nla_total_size(sizeof(struct tc_vlan))
+ + nla_total_size(sizeof(u16)) /* TCA_VLAN_PUSH_VLAN_ID */
+ + nla_total_size(sizeof(u16)) /* TCA_VLAN_PUSH_VLAN_PROTOCOL */
+ + nla_total_size(sizeof(u8)); /* TCA_VLAN_PUSH_VLAN_PRIORITY */
+}
+
static struct tc_action_ops act_vlan_ops = {
.kind = "vlan",
.type = TCA_ACT_VLAN,
@@ -305,6 +313,7 @@ static struct tc_action_ops act_vlan_ops
.init = tcf_vlan_init,
.cleanup = tcf_vlan_cleanup,
.walk = tcf_vlan_walker,
+ .get_fill_size = tcf_vlan_get_fill_size,
.lookup = tcf_vlan_search,
.size = sizeof(struct tcf_vlan),
};
From: Claudiu Manoil <[email protected]>
[ Upstream commit c5d139697d5d9ecf9c7cd92d7d7838a173508900 ]
Make sure the delayed work for stats update is not pending before
wq destruction.
This fixes the module unload path.
The issue is there since day 1.
Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Claudiu Manoil <[email protected]>
Reviewed-by: Alexandre Belloni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mscc/ocelot.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/ethernet/mscc/ocelot.c
+++ b/drivers/net/ethernet/mscc/ocelot.c
@@ -1767,6 +1767,7 @@ EXPORT_SYMBOL(ocelot_init);
void ocelot_deinit(struct ocelot *ocelot)
{
+ cancel_delayed_work(&ocelot->stats_work);
destroy_workqueue(ocelot->stats_queue);
mutex_destroy(&ocelot->stats_lock);
}
From: Taras Kondratiuk <[email protected]>
[ Upstream commit 4da5f0018eef4c0de31675b670c80e82e13e99d1 ]
Commit 2753ca5d9009 ("tipc: fix uninit-value in tipc_nl_compat_doit")
broke older tipc tools that use compat interface (e.g. tipc-config from
tipcutils package):
% tipc-config -p
operation not supported
The commit started to reject TIPC netlink compat messages that do not
have attributes. It is too restrictive because some of such messages are
valid (they don't need any arguments):
% grep 'tx none' include/uapi/linux/tipc_config.h
#define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */
#define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */
#define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */
#define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */
#define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */
#define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */
#define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */
#define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */
This patch relaxes the original fix and rejects messages without
arguments only if such arguments are expected by a command (reg_type is
non zero).
Fixes: 2753ca5d9009 ("tipc: fix uninit-value in tipc_nl_compat_doit")
Cc: [email protected]
Signed-off-by: Taras Kondratiuk <[email protected]>
Acked-by: Ying Xue <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/tipc/netlink_compat.c | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
--- a/net/tipc/netlink_compat.c
+++ b/net/tipc/netlink_compat.c
@@ -55,6 +55,7 @@ struct tipc_nl_compat_msg {
int rep_type;
int rep_size;
int req_type;
+ int req_size;
struct net *net;
struct sk_buff *rep;
struct tlv_desc *req;
@@ -257,7 +258,8 @@ static int tipc_nl_compat_dumpit(struct
int err;
struct sk_buff *arg;
- if (msg->req_type && !TLV_CHECK_TYPE(msg->req, msg->req_type))
+ if (msg->req_type && (!msg->req_size ||
+ !TLV_CHECK_TYPE(msg->req, msg->req_type)))
return -EINVAL;
msg->rep = tipc_tlv_alloc(msg->rep_size);
@@ -354,7 +356,8 @@ static int tipc_nl_compat_doit(struct ti
{
int err;
- if (msg->req_type && !TLV_CHECK_TYPE(msg->req, msg->req_type))
+ if (msg->req_type && (!msg->req_size ||
+ !TLV_CHECK_TYPE(msg->req, msg->req_type)))
return -EINVAL;
err = __tipc_nl_compat_doit(cmd, msg);
@@ -1276,8 +1279,8 @@ static int tipc_nl_compat_recv(struct sk
goto send;
}
- len = nlmsg_attrlen(req_nlh, GENL_HDRLEN + TIPC_GENL_HDRLEN);
- if (!len || !TLV_OK(msg.req, len)) {
+ msg.req_size = nlmsg_attrlen(req_nlh, GENL_HDRLEN + TIPC_GENL_HDRLEN);
+ if (msg.req_size && !TLV_OK(msg.req, msg.req_size)) {
msg.rep = tipc_get_err_tlv(TIPC_CFG_NOT_SUPPORTED);
err = -EOPNOTSUPP;
goto send;
From: Sudarsana Reddy Kalluru <[email protected]>
[ Upstream commit d1f0b5dce8fda09a7f5f04c1878f181d548e42f5 ]
Commit 3968d38917eb ("bnx2x: Fix Multi-Cos.") which enabled multi-cos
feature after prolonged time in driver added some regression causing
numerous issues (sudden reboots, tx timeout etc.) reported by customers.
We plan to backout this commit and submit proper fix once we have root
cause of issues reported with this feature enabled.
Fixes: 3968d38917eb ("bnx2x: Fix Multi-Cos.")
Signed-off-by: Sudarsana Reddy Kalluru <[email protected]>
Signed-off-by: Manish Chopra <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c | 3 +--
1 file changed, 1 insertion(+), 2 deletions(-)
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -1936,8 +1936,7 @@ u16 bnx2x_select_queue(struct net_device
}
/* select a non-FCoE queue */
- return fallback(dev, skb, NULL) %
- (BNX2X_NUM_ETH_QUEUES(bp) * bp->max_cos);
+ return fallback(dev, skb, NULL) % (BNX2X_NUM_ETH_QUEUES(bp));
}
void bnx2x_set_num_queues(struct bnx2x *bp)
From: Tejun Heo <[email protected]>
commit cee0c33c546a93957a52ae9ab6bebadbee765ec5 upstream.
b636fd38dc40 ("cgroup: Implement css_task_iter_skip()") introduced
css_task_iter_skip() which is used to fix task iterations skipping
dying threadgroup leaders with live threads. Skipping is implemented
as a subportion of full advancing but css_task_iter_next() forgot to
fully advance a skipped iterator before determining the next task to
visit causing it to return invalid task pointers.
Fix it by making css_task_iter_next() fully advance the iterator if it
has been skipped since the previous iteration.
Signed-off-by: Tejun Heo <[email protected]>
Reported-by: syzbot
Link: http://lkml.kernel.org/r/[email protected]
Fixes: b636fd38dc40 ("cgroup: Implement css_task_iter_skip()")
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/cgroup/cgroup.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -4303,6 +4303,10 @@ struct task_struct *css_task_iter_next(s
spin_lock_irq(&css_set_lock);
+ /* @it may be half-advanced by skips, finish advancing */
+ if (it->flags & CSS_TASK_ITER_SKIPPED)
+ css_task_iter_advance(it);
+
if (it->task_pos) {
it->cur_task = list_entry(it->task_pos, struct task_struct,
cg_list);
From: Tejun Heo <[email protected]>
commit c596687a008b579c503afb7a64fcacc7270fae9e upstream.
While adding handling for dying task group leaders c03cd7738a83
("cgroup: Include dying leaders with live threads in PROCS
iterations") added an inverted cset skip condition to
css_task_iter_advance_css_set(). It should skip cset if it's
completely empty but was incorrectly testing for the inverse condition
for the dying_tasks list. Fix it.
Signed-off-by: Tejun Heo <[email protected]>
Fixes: c03cd7738a83 ("cgroup: Include dying leaders with live threads in PROCS iterations")
Reported-by: [email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/cgroup/cgroup.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -4154,7 +4154,7 @@ static void css_task_iter_advance_css_se
it->task_pos = NULL;
return;
}
- } while (!css_set_populated(cset) && !list_empty(&cset->dying_tasks));
+ } while (!css_set_populated(cset) && list_empty(&cset->dying_tasks));
if (!list_empty(&cset->tasks))
it->task_pos = cset->tasks.next;
From: Matteo Croce <[email protected]>
[ Upstream commit 944a83a2669ae8aa2c7664e79376ca7468eb0a2b ]
mvpp2 uses a delayed workqueue to gather traffic statistics.
On module removal the workqueue can be destroyed before calling
cancel_delayed_work_sync() on its works.
Fix it by moving the destroy_workqueue() call after mvpp2_port_remove().
Also remove an unneeded call to flush_workqueue()
# rmmod mvpp2
[ 2743.311722] mvpp2 f4000000.ethernet eth1: phy link down 10gbase-kr/10Gbps/Full
[ 2743.320063] mvpp2 f4000000.ethernet eth1: Link is Down
[ 2743.572263] mvpp2 f4000000.ethernet eth2: phy link down sgmii/1Gbps/Full
[ 2743.580076] mvpp2 f4000000.ethernet eth2: Link is Down
[ 2744.102169] mvpp2 f2000000.ethernet eth0: phy link down 10gbase-kr/10Gbps/Full
[ 2744.110441] mvpp2 f2000000.ethernet eth0: Link is Down
[ 2744.115614] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 2744.115615] Mem abort info:
[ 2744.115616] ESR = 0x96000005
[ 2744.115617] Exception class = DABT (current EL), IL = 32 bits
[ 2744.115618] SET = 0, FnV = 0
[ 2744.115619] EA = 0, S1PTW = 0
[ 2744.115620] Data abort info:
[ 2744.115621] ISV = 0, ISS = 0x00000005
[ 2744.115622] CM = 0, WnR = 0
[ 2744.115624] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000422681000
[ 2744.115626] [0000000000000000] pgd=0000000000000000, pud=0000000000000000
[ 2744.115630] Internal error: Oops: 96000005 [#1] SMP
[ 2744.115632] Modules linked in: mvpp2(-) algif_hash af_alg nls_iso8859_1 nls_cp437 vfat fat xhci_plat_hcd m25p80 spi_nor xhci_hcd mtd usbcore i2c_mv64xxx sfp usb_common marvell10g phy_generic spi_orion mdio_i2c i2c_core mvmdio phylink sbsa_gwdt ip_tables x_tables autofs4 [last unloaded: mvpp2]
[ 2744.115654] CPU: 3 PID: 8357 Comm: kworker/3:2 Not tainted 5.3.0-rc2 #1
[ 2744.115655] Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT)
[ 2744.115665] Workqueue: events_power_efficient phylink_resolve [phylink]
[ 2744.115669] pstate: a0000085 (NzCv daIf -PAN -UAO)
[ 2744.115675] pc : __queue_work+0x9c/0x4d8
[ 2744.115677] lr : __queue_work+0x170/0x4d8
[ 2744.115678] sp : ffffff801001bd50
[ 2744.115680] x29: ffffff801001bd50 x28: ffffffc422597600
[ 2744.115684] x27: ffffff80109ae6f0 x26: ffffff80108e4018
[ 2744.115688] x25: 0000000000000003 x24: 0000000000000004
[ 2744.115691] x23: ffffff80109ae6e0 x22: 0000000000000017
[ 2744.115694] x21: ffffffc42c030000 x20: ffffffc42209e8f8
[ 2744.115697] x19: 0000000000000000 x18: 0000000000000000
[ 2744.115699] x17: 0000000000000000 x16: 0000000000000000
[ 2744.115701] x15: 0000000000000010 x14: ffffffffffffffff
[ 2744.115702] x13: ffffff8090e2b95f x12: ffffff8010e2b967
[ 2744.115704] x11: ffffff8010906000 x10: 0000000000000040
[ 2744.115706] x9 : ffffff80109223b8 x8 : ffffff80109223b0
[ 2744.115707] x7 : ffffffc42bc00068 x6 : 0000000000000000
[ 2744.115709] x5 : ffffffc42bc00000 x4 : 0000000000000000
[ 2744.115710] x3 : 0000000000000000 x2 : 0000000000000000
[ 2744.115712] x1 : 0000000000000008 x0 : ffffffc42c030000
[ 2744.115714] Call trace:
[ 2744.115716] __queue_work+0x9c/0x4d8
[ 2744.115718] delayed_work_timer_fn+0x28/0x38
[ 2744.115722] call_timer_fn+0x3c/0x180
[ 2744.115723] expire_timers+0x60/0x168
[ 2744.115724] run_timer_softirq+0xbc/0x1e8
[ 2744.115727] __do_softirq+0x128/0x320
[ 2744.115731] irq_exit+0xa4/0xc0
[ 2744.115734] __handle_domain_irq+0x70/0xc0
[ 2744.115735] gic_handle_irq+0x58/0xa8
[ 2744.115737] el1_irq+0xb8/0x140
[ 2744.115738] console_unlock+0x3a0/0x568
[ 2744.115740] vprintk_emit+0x200/0x2a0
[ 2744.115744] dev_vprintk_emit+0x1c8/0x1e4
[ 2744.115747] dev_printk_emit+0x6c/0x7c
[ 2744.115751] __netdev_printk+0x104/0x1d8
[ 2744.115752] netdev_printk+0x60/0x70
[ 2744.115756] phylink_resolve+0x38c/0x3c8 [phylink]
[ 2744.115758] process_one_work+0x1f8/0x448
[ 2744.115760] worker_thread+0x54/0x500
[ 2744.115762] kthread+0x12c/0x130
[ 2744.115764] ret_from_fork+0x10/0x1c
[ 2744.115768] Code: aa1403e0 97fffbbe aa0003f5 b4000700 (f9400261)
Fixes: 118d6298f6f0 ("net: mvpp2: add ethtool GOP statistics")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Matteo Croce <[email protected]>
Acked-by: Antoine Tenart <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -5358,9 +5358,6 @@ static int mvpp2_remove(struct platform_
mvpp2_dbgfs_cleanup(priv);
- flush_workqueue(priv->stats_queue);
- destroy_workqueue(priv->stats_queue);
-
fwnode_for_each_available_child_node(fwnode, port_fwnode) {
if (priv->port_list[i]) {
mutex_destroy(&priv->port_list[i]->gather_stats_lock);
@@ -5369,6 +5366,8 @@ static int mvpp2_remove(struct platform_
i++;
}
+ destroy_workqueue(priv->stats_queue);
+
for (i = 0; i < MVPP2_BM_POOLS_NUM; i++) {
struct mvpp2_bm_pool *bm_pool = &priv->bm_pools[i];
From: Nikolay Aleksandrov <[email protected]>
[ Upstream commit 5c725b6b65067909548ac9ca9bc777098ec9883d ]
When permanent entries were introduced by the commit below, they were
exempt from timing out and thus igmp leave wouldn't affect them unless
fast leave was enabled on the port which was added before permanent
entries existed. It shouldn't matter if fast leave is enabled or not
if the user added a permanent entry it shouldn't be deleted on igmp
leave.
Before:
$ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave
$ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent
$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent
< join and leave 229.1.1.1 on eth4 >
$ bridge mdb show
$
After:
$ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave
$ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent
$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent
< join and leave 229.1.1.1 on eth4 >
$ bridge mdb show
dev br0 port eth4 grp 229.1.1.1 permanent
Fixes: ccb1c31a7a87 ("bridge: add flags to distinguish permanent mdb entires")
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/br_multicast.c | 3 +++
1 file changed, 3 insertions(+)
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -1621,6 +1621,9 @@ br_multicast_leave_group(struct net_brid
if (!br_port_group_equal(p, port, src))
continue;
+ if (p->flags & MDB_PG_FLAGS_PERMANENT)
+ break;
+
rcu_assign_pointer(*pp, p->next);
hlist_del_init(&p->mglist);
del_timer(&p->timer);
From: Dmytro Linkin <[email protected]>
[ Upstream commit 7be8ef2cdbfe41a2e524b7c6cc3f8e6cfaa906e4 ]
Currently init call of all actions (except ipt) init their 'parm'
structure as a direct pointer to nla data in skb. This leads to race
condition when some of the filter actions were initialized successfully
(and were assigned with idr action index that was written directly
into nla data), but then were deleted and retried (due to following
action module missing or classifier-initiated retry), in which case
action init code tries to insert action to idr with index that was
assigned on previous iteration. During retry the index can be reused
by another action that was inserted concurrently, which causes
unintended action sharing between filters.
To fix described race condition, save action idr index to temporary
stack-allocated variable instead on nla data.
Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action")
Signed-off-by: Dmytro Linkin <[email protected]>
Signed-off-by: Vlad Buslov <[email protected]>
Acked-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/act_bpf.c | 9 +++++----
net/sched/act_connmark.c | 9 +++++----
net/sched/act_csum.c | 9 +++++----
net/sched/act_gact.c | 8 +++++---
net/sched/act_ife.c | 8 +++++---
net/sched/act_mirred.c | 13 +++++++------
net/sched/act_nat.c | 9 +++++----
net/sched/act_pedit.c | 10 ++++++----
net/sched/act_police.c | 8 +++++---
net/sched/act_sample.c | 10 +++++-----
net/sched/act_simple.c | 10 ++++++----
net/sched/act_skbedit.c | 11 ++++++-----
net/sched/act_skbmod.c | 11 ++++++-----
net/sched/act_tunnel_key.c | 8 +++++---
net/sched/act_vlan.c | 16 +++++++++-------
15 files changed, 85 insertions(+), 64 deletions(-)
--- a/net/sched/act_bpf.c
+++ b/net/sched/act_bpf.c
@@ -287,6 +287,7 @@ static int tcf_bpf_init(struct net *net,
struct tcf_bpf *prog;
bool is_bpf, is_ebpf;
int ret, res = 0;
+ u32 index;
if (!nla)
return -EINVAL;
@@ -299,13 +300,13 @@ static int tcf_bpf_init(struct net *net,
return -EINVAL;
parm = nla_data(tb[TCA_ACT_BPF_PARMS]);
-
- ret = tcf_idr_check_alloc(tn, &parm->index, act, bind);
+ index = parm->index;
+ ret = tcf_idr_check_alloc(tn, &index, act, bind);
if (!ret) {
- ret = tcf_idr_create(tn, parm->index, est, act,
+ ret = tcf_idr_create(tn, index, est, act,
&act_bpf_ops, bind, true);
if (ret < 0) {
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return ret;
}
--- a/net/sched/act_connmark.c
+++ b/net/sched/act_connmark.c
@@ -104,6 +104,7 @@ static int tcf_connmark_init(struct net
struct tcf_connmark_info *ci;
struct tc_connmark *parm;
int ret = 0;
+ u32 index;
if (!nla)
return -EINVAL;
@@ -117,13 +118,13 @@ static int tcf_connmark_init(struct net
return -EINVAL;
parm = nla_data(tb[TCA_CONNMARK_PARMS]);
-
- ret = tcf_idr_check_alloc(tn, &parm->index, a, bind);
+ index = parm->index;
+ ret = tcf_idr_check_alloc(tn, &index, a, bind);
if (!ret) {
- ret = tcf_idr_create(tn, parm->index, est, a,
+ ret = tcf_idr_create(tn, index, est, a,
&act_connmark_ops, bind, false);
if (ret) {
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return ret;
}
--- a/net/sched/act_csum.c
+++ b/net/sched/act_csum.c
@@ -55,6 +55,7 @@ static int tcf_csum_init(struct net *net
struct tc_csum *parm;
struct tcf_csum *p;
int ret = 0, err;
+ u32 index;
if (nla == NULL)
return -EINVAL;
@@ -66,13 +67,13 @@ static int tcf_csum_init(struct net *net
if (tb[TCA_CSUM_PARMS] == NULL)
return -EINVAL;
parm = nla_data(tb[TCA_CSUM_PARMS]);
-
- err = tcf_idr_check_alloc(tn, &parm->index, a, bind);
+ index = parm->index;
+ err = tcf_idr_check_alloc(tn, &index, a, bind);
if (!err) {
- ret = tcf_idr_create(tn, parm->index, est, a,
+ ret = tcf_idr_create(tn, index, est, a,
&act_csum_ops, bind, true);
if (ret) {
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return ret;
}
ret = ACT_P_CREATED;
--- a/net/sched/act_gact.c
+++ b/net/sched/act_gact.c
@@ -64,6 +64,7 @@ static int tcf_gact_init(struct net *net
struct tc_gact *parm;
struct tcf_gact *gact;
int ret = 0;
+ u32 index;
int err;
#ifdef CONFIG_GACT_PROB
struct tc_gact_p *p_parm = NULL;
@@ -79,6 +80,7 @@ static int tcf_gact_init(struct net *net
if (tb[TCA_GACT_PARMS] == NULL)
return -EINVAL;
parm = nla_data(tb[TCA_GACT_PARMS]);
+ index = parm->index;
#ifndef CONFIG_GACT_PROB
if (tb[TCA_GACT_PROB] != NULL)
@@ -91,12 +93,12 @@ static int tcf_gact_init(struct net *net
}
#endif
- err = tcf_idr_check_alloc(tn, &parm->index, a, bind);
+ err = tcf_idr_check_alloc(tn, &index, a, bind);
if (!err) {
- ret = tcf_idr_create(tn, parm->index, est, a,
+ ret = tcf_idr_create(tn, index, est, a,
&act_gact_ops, bind, true);
if (ret) {
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return ret;
}
ret = ACT_P_CREATED;
--- a/net/sched/act_ife.c
+++ b/net/sched/act_ife.c
@@ -482,6 +482,7 @@ static int tcf_ife_init(struct net *net,
u8 *saddr = NULL;
bool exists = false;
int ret = 0;
+ u32 index;
int err;
if (!nla) {
@@ -509,7 +510,8 @@ static int tcf_ife_init(struct net *net,
if (!p)
return -ENOMEM;
- err = tcf_idr_check_alloc(tn, &parm->index, a, bind);
+ index = parm->index;
+ err = tcf_idr_check_alloc(tn, &index, a, bind);
if (err < 0) {
kfree(p);
return err;
@@ -521,10 +523,10 @@ static int tcf_ife_init(struct net *net,
}
if (!exists) {
- ret = tcf_idr_create(tn, parm->index, est, a, &act_ife_ops,
+ ret = tcf_idr_create(tn, index, est, a, &act_ife_ops,
bind, true);
if (ret) {
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
kfree(p);
return ret;
}
--- a/net/sched/act_mirred.c
+++ b/net/sched/act_mirred.c
@@ -104,6 +104,7 @@ static int tcf_mirred_init(struct net *n
struct net_device *dev;
bool exists = false;
int ret, err;
+ u32 index;
if (!nla) {
NL_SET_ERR_MSG_MOD(extack, "Mirred requires attributes to be passed");
@@ -117,8 +118,8 @@ static int tcf_mirred_init(struct net *n
return -EINVAL;
}
parm = nla_data(tb[TCA_MIRRED_PARMS]);
-
- err = tcf_idr_check_alloc(tn, &parm->index, a, bind);
+ index = parm->index;
+ err = tcf_idr_check_alloc(tn, &index, a, bind);
if (err < 0)
return err;
exists = err;
@@ -135,21 +136,21 @@ static int tcf_mirred_init(struct net *n
if (exists)
tcf_idr_release(*a, bind);
else
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
NL_SET_ERR_MSG_MOD(extack, "Unknown mirred option");
return -EINVAL;
}
if (!exists) {
if (!parm->ifindex) {
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
NL_SET_ERR_MSG_MOD(extack, "Specified device does not exist");
return -EINVAL;
}
- ret = tcf_idr_create(tn, parm->index, est, a,
+ ret = tcf_idr_create(tn, index, est, a,
&act_mirred_ops, bind, true);
if (ret) {
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return ret;
}
ret = ACT_P_CREATED;
--- a/net/sched/act_nat.c
+++ b/net/sched/act_nat.c
@@ -45,6 +45,7 @@ static int tcf_nat_init(struct net *net,
struct tc_nat *parm;
int ret = 0, err;
struct tcf_nat *p;
+ u32 index;
if (nla == NULL)
return -EINVAL;
@@ -56,13 +57,13 @@ static int tcf_nat_init(struct net *net,
if (tb[TCA_NAT_PARMS] == NULL)
return -EINVAL;
parm = nla_data(tb[TCA_NAT_PARMS]);
-
- err = tcf_idr_check_alloc(tn, &parm->index, a, bind);
+ index = parm->index;
+ err = tcf_idr_check_alloc(tn, &index, a, bind);
if (!err) {
- ret = tcf_idr_create(tn, parm->index, est, a,
+ ret = tcf_idr_create(tn, index, est, a,
&act_nat_ops, bind, false);
if (ret) {
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return ret;
}
ret = ACT_P_CREATED;
--- a/net/sched/act_pedit.c
+++ b/net/sched/act_pedit.c
@@ -149,6 +149,7 @@ static int tcf_pedit_init(struct net *ne
struct tcf_pedit *p;
int ret = 0, err;
int ksize;
+ u32 index;
if (!nla) {
NL_SET_ERR_MSG_MOD(extack, "Pedit requires attributes to be passed");
@@ -178,18 +179,19 @@ static int tcf_pedit_init(struct net *ne
if (IS_ERR(keys_ex))
return PTR_ERR(keys_ex);
- err = tcf_idr_check_alloc(tn, &parm->index, a, bind);
+ index = parm->index;
+ err = tcf_idr_check_alloc(tn, &index, a, bind);
if (!err) {
if (!parm->nkeys) {
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
NL_SET_ERR_MSG_MOD(extack, "Pedit requires keys to be passed");
ret = -EINVAL;
goto out_free;
}
- ret = tcf_idr_create(tn, parm->index, est, a,
+ ret = tcf_idr_create(tn, index, est, a,
&act_pedit_ops, bind, false);
if (ret) {
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
goto out_free;
}
ret = ACT_P_CREATED;
--- a/net/sched/act_police.c
+++ b/net/sched/act_police.c
@@ -85,6 +85,7 @@ static int tcf_police_init(struct net *n
struct qdisc_rate_table *R_tab = NULL, *P_tab = NULL;
struct tc_action_net *tn = net_generic(net, police_net_id);
bool exists = false;
+ u32 index;
int size;
if (nla == NULL)
@@ -101,7 +102,8 @@ static int tcf_police_init(struct net *n
return -EINVAL;
parm = nla_data(tb[TCA_POLICE_TBF]);
- err = tcf_idr_check_alloc(tn, &parm->index, a, bind);
+ index = parm->index;
+ err = tcf_idr_check_alloc(tn, &index, a, bind);
if (err < 0)
return err;
exists = err;
@@ -109,10 +111,10 @@ static int tcf_police_init(struct net *n
return 0;
if (!exists) {
- ret = tcf_idr_create(tn, parm->index, NULL, a,
+ ret = tcf_idr_create(tn, index, NULL, a,
&act_police_ops, bind, false);
if (ret) {
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return ret;
}
ret = ACT_P_CREATED;
--- a/net/sched/act_sample.c
+++ b/net/sched/act_sample.c
@@ -43,7 +43,7 @@ static int tcf_sample_init(struct net *n
struct tc_action_net *tn = net_generic(net, sample_net_id);
struct nlattr *tb[TCA_SAMPLE_MAX + 1];
struct psample_group *psample_group;
- u32 psample_group_num, rate;
+ u32 psample_group_num, rate, index;
struct tc_sample *parm;
struct tcf_sample *s;
bool exists = false;
@@ -59,8 +59,8 @@ static int tcf_sample_init(struct net *n
return -EINVAL;
parm = nla_data(tb[TCA_SAMPLE_PARMS]);
-
- err = tcf_idr_check_alloc(tn, &parm->index, a, bind);
+ index = parm->index;
+ err = tcf_idr_check_alloc(tn, &index, a, bind);
if (err < 0)
return err;
exists = err;
@@ -68,10 +68,10 @@ static int tcf_sample_init(struct net *n
return 0;
if (!exists) {
- ret = tcf_idr_create(tn, parm->index, est, a,
+ ret = tcf_idr_create(tn, index, est, a,
&act_sample_ops, bind, true);
if (ret) {
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return ret;
}
ret = ACT_P_CREATED;
--- a/net/sched/act_simple.c
+++ b/net/sched/act_simple.c
@@ -88,6 +88,7 @@ static int tcf_simp_init(struct net *net
struct tcf_defact *d;
bool exists = false;
int ret = 0, err;
+ u32 index;
if (nla == NULL)
return -EINVAL;
@@ -100,7 +101,8 @@ static int tcf_simp_init(struct net *net
return -EINVAL;
parm = nla_data(tb[TCA_DEF_PARMS]);
- err = tcf_idr_check_alloc(tn, &parm->index, a, bind);
+ index = parm->index;
+ err = tcf_idr_check_alloc(tn, &index, a, bind);
if (err < 0)
return err;
exists = err;
@@ -111,15 +113,15 @@ static int tcf_simp_init(struct net *net
if (exists)
tcf_idr_release(*a, bind);
else
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return -EINVAL;
}
if (!exists) {
- ret = tcf_idr_create(tn, parm->index, est, a,
+ ret = tcf_idr_create(tn, index, est, a,
&act_simp_ops, bind, false);
if (ret) {
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return ret;
}
--- a/net/sched/act_skbedit.c
+++ b/net/sched/act_skbedit.c
@@ -107,6 +107,7 @@ static int tcf_skbedit_init(struct net *
u16 *queue_mapping = NULL, *ptype = NULL;
bool exists = false;
int ret = 0, err;
+ u32 index;
if (nla == NULL)
return -EINVAL;
@@ -153,8 +154,8 @@ static int tcf_skbedit_init(struct net *
}
parm = nla_data(tb[TCA_SKBEDIT_PARMS]);
-
- err = tcf_idr_check_alloc(tn, &parm->index, a, bind);
+ index = parm->index;
+ err = tcf_idr_check_alloc(tn, &index, a, bind);
if (err < 0)
return err;
exists = err;
@@ -165,15 +166,15 @@ static int tcf_skbedit_init(struct net *
if (exists)
tcf_idr_release(*a, bind);
else
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return -EINVAL;
}
if (!exists) {
- ret = tcf_idr_create(tn, parm->index, est, a,
+ ret = tcf_idr_create(tn, index, est, a,
&act_skbedit_ops, bind, true);
if (ret) {
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return ret;
}
--- a/net/sched/act_skbmod.c
+++ b/net/sched/act_skbmod.c
@@ -88,12 +88,12 @@ static int tcf_skbmod_init(struct net *n
struct nlattr *tb[TCA_SKBMOD_MAX + 1];
struct tcf_skbmod_params *p, *p_old;
struct tc_skbmod *parm;
+ u32 lflags = 0, index;
struct tcf_skbmod *d;
bool exists = false;
u8 *daddr = NULL;
u8 *saddr = NULL;
u16 eth_type = 0;
- u32 lflags = 0;
int ret = 0, err;
if (!nla)
@@ -122,10 +122,11 @@ static int tcf_skbmod_init(struct net *n
}
parm = nla_data(tb[TCA_SKBMOD_PARMS]);
+ index = parm->index;
if (parm->flags & SKBMOD_F_SWAPMAC)
lflags = SKBMOD_F_SWAPMAC;
- err = tcf_idr_check_alloc(tn, &parm->index, a, bind);
+ err = tcf_idr_check_alloc(tn, &index, a, bind);
if (err < 0)
return err;
exists = err;
@@ -136,15 +137,15 @@ static int tcf_skbmod_init(struct net *n
if (exists)
tcf_idr_release(*a, bind);
else
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return -EINVAL;
}
if (!exists) {
- ret = tcf_idr_create(tn, parm->index, est, a,
+ ret = tcf_idr_create(tn, index, est, a,
&act_skbmod_ops, bind, true);
if (ret) {
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return ret;
}
--- a/net/sched/act_tunnel_key.c
+++ b/net/sched/act_tunnel_key.c
@@ -224,6 +224,7 @@ static int tunnel_key_init(struct net *n
__be16 flags;
u8 tos, ttl;
int ret = 0;
+ u32 index;
int err;
if (!nla) {
@@ -244,7 +245,8 @@ static int tunnel_key_init(struct net *n
}
parm = nla_data(tb[TCA_TUNNEL_KEY_PARMS]);
- err = tcf_idr_check_alloc(tn, &parm->index, a, bind);
+ index = parm->index;
+ err = tcf_idr_check_alloc(tn, &index, a, bind);
if (err < 0)
return err;
exists = err;
@@ -338,7 +340,7 @@ static int tunnel_key_init(struct net *n
}
if (!exists) {
- ret = tcf_idr_create(tn, parm->index, est, a,
+ ret = tcf_idr_create(tn, index, est, a,
&act_tunnel_key_ops, bind, true);
if (ret) {
NL_SET_ERR_MSG(extack, "Cannot create TC IDR");
@@ -384,7 +386,7 @@ err_out:
if (exists)
tcf_idr_release(*a, bind);
else
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return ret;
}
--- a/net/sched/act_vlan.c
+++ b/net/sched/act_vlan.c
@@ -118,6 +118,7 @@ static int tcf_vlan_init(struct net *net
u8 push_prio = 0;
bool exists = false;
int ret = 0, err;
+ u32 index;
if (!nla)
return -EINVAL;
@@ -129,7 +130,8 @@ static int tcf_vlan_init(struct net *net
if (!tb[TCA_VLAN_PARMS])
return -EINVAL;
parm = nla_data(tb[TCA_VLAN_PARMS]);
- err = tcf_idr_check_alloc(tn, &parm->index, a, bind);
+ index = parm->index;
+ err = tcf_idr_check_alloc(tn, &index, a, bind);
if (err < 0)
return err;
exists = err;
@@ -145,7 +147,7 @@ static int tcf_vlan_init(struct net *net
if (exists)
tcf_idr_release(*a, bind);
else
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return -EINVAL;
}
push_vid = nla_get_u16(tb[TCA_VLAN_PUSH_VLAN_ID]);
@@ -153,7 +155,7 @@ static int tcf_vlan_init(struct net *net
if (exists)
tcf_idr_release(*a, bind);
else
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return -ERANGE;
}
@@ -167,7 +169,7 @@ static int tcf_vlan_init(struct net *net
if (exists)
tcf_idr_release(*a, bind);
else
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return -EPROTONOSUPPORT;
}
} else {
@@ -181,16 +183,16 @@ static int tcf_vlan_init(struct net *net
if (exists)
tcf_idr_release(*a, bind);
else
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return -EINVAL;
}
action = parm->v_action;
if (!exists) {
- ret = tcf_idr_create(tn, parm->index, est, a,
+ ret = tcf_idr_create(tn, index, est, a,
&act_vlan_ops, bind, true);
if (ret) {
- tcf_idr_cleanup(tn, parm->index);
+ tcf_idr_cleanup(tn, index);
return ret;
}
From: Jiri Pirko <[email protected]>
[ Upstream commit 28fe79000e9b0a6f99959869947f1ca305f14599 ]
In case of sp2 pci driver registration fail, fix the error path to
start with sp1 pci driver unregister.
Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: Ido Schimmel <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -5032,7 +5032,7 @@ static int __init mlxsw_sp_module_init(v
return 0;
err_sp2_pci_driver_register:
- mlxsw_pci_driver_unregister(&mlxsw_sp2_pci_driver);
+ mlxsw_pci_driver_unregister(&mlxsw_sp1_pci_driver);
err_sp1_pci_driver_register:
mlxsw_core_driver_unregister(&mlxsw_sp2_driver);
err_sp2_core_driver_register:
From: Tejun Heo <[email protected]>
commit c03cd7738a83b13739f00546166969342c8ff014 upstream.
CSS_TASK_ITER_PROCS currently iterates live group leaders; however,
this means that a process with dying leader and live threads will be
skipped. IOW, cgroup.procs might be empty while cgroup.threads isn't,
which is confusing to say the least.
Fix it by making cset track dying tasks and include dying leaders with
live threads in PROCS iteration.
Signed-off-by: Tejun Heo <[email protected]>
Reported-and-tested-by: Topi Miettinen <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/cgroup-defs.h | 1 +
include/linux/cgroup.h | 1 +
kernel/cgroup/cgroup.c | 44 +++++++++++++++++++++++++++++++++++++-------
3 files changed, 39 insertions(+), 7 deletions(-)
--- a/include/linux/cgroup-defs.h
+++ b/include/linux/cgroup-defs.h
@@ -207,6 +207,7 @@ struct css_set {
*/
struct list_head tasks;
struct list_head mg_tasks;
+ struct list_head dying_tasks;
/* all css_task_iters currently walking this cset */
struct list_head task_iters;
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -60,6 +60,7 @@ struct css_task_iter {
struct list_head *task_pos;
struct list_head *tasks_head;
struct list_head *mg_tasks_head;
+ struct list_head *dying_tasks_head;
struct css_set *cur_cset;
struct css_set *cur_dcset;
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -673,6 +673,7 @@ struct css_set init_css_set = {
.dom_cset = &init_css_set,
.tasks = LIST_HEAD_INIT(init_css_set.tasks),
.mg_tasks = LIST_HEAD_INIT(init_css_set.mg_tasks),
+ .dying_tasks = LIST_HEAD_INIT(init_css_set.dying_tasks),
.task_iters = LIST_HEAD_INIT(init_css_set.task_iters),
.threaded_csets = LIST_HEAD_INIT(init_css_set.threaded_csets),
.cgrp_links = LIST_HEAD_INIT(init_css_set.cgrp_links),
@@ -1145,6 +1146,7 @@ static struct css_set *find_css_set(stru
cset->dom_cset = cset;
INIT_LIST_HEAD(&cset->tasks);
INIT_LIST_HEAD(&cset->mg_tasks);
+ INIT_LIST_HEAD(&cset->dying_tasks);
INIT_LIST_HEAD(&cset->task_iters);
INIT_LIST_HEAD(&cset->threaded_csets);
INIT_HLIST_NODE(&cset->hlist);
@@ -4152,15 +4154,18 @@ static void css_task_iter_advance_css_se
it->task_pos = NULL;
return;
}
- } while (!css_set_populated(cset));
+ } while (!css_set_populated(cset) && !list_empty(&cset->dying_tasks));
if (!list_empty(&cset->tasks))
it->task_pos = cset->tasks.next;
- else
+ else if (!list_empty(&cset->mg_tasks))
it->task_pos = cset->mg_tasks.next;
+ else
+ it->task_pos = cset->dying_tasks.next;
it->tasks_head = &cset->tasks;
it->mg_tasks_head = &cset->mg_tasks;
+ it->dying_tasks_head = &cset->dying_tasks;
/*
* We don't keep css_sets locked across iteration steps and thus
@@ -4199,6 +4204,8 @@ static void css_task_iter_skip(struct cs
static void css_task_iter_advance(struct css_task_iter *it)
{
+ struct task_struct *task;
+
lockdep_assert_held(&css_set_lock);
repeat:
if (it->task_pos) {
@@ -4215,17 +4222,32 @@ repeat:
if (it->task_pos == it->tasks_head)
it->task_pos = it->mg_tasks_head->next;
if (it->task_pos == it->mg_tasks_head)
+ it->task_pos = it->dying_tasks_head->next;
+ if (it->task_pos == it->dying_tasks_head)
css_task_iter_advance_css_set(it);
} else {
/* called from start, proceed to the first cset */
css_task_iter_advance_css_set(it);
}
- /* if PROCS, skip over tasks which aren't group leaders */
- if ((it->flags & CSS_TASK_ITER_PROCS) && it->task_pos &&
- !thread_group_leader(list_entry(it->task_pos, struct task_struct,
- cg_list)))
- goto repeat;
+ if (!it->task_pos)
+ return;
+
+ task = list_entry(it->task_pos, struct task_struct, cg_list);
+
+ if (it->flags & CSS_TASK_ITER_PROCS) {
+ /* if PROCS, skip over tasks which aren't group leaders */
+ if (!thread_group_leader(task))
+ goto repeat;
+
+ /* and dying leaders w/o live member threads */
+ if (!atomic_read(&task->signal->live))
+ goto repeat;
+ } else {
+ /* skip all dying ones */
+ if (task->flags & PF_EXITING)
+ goto repeat;
+ }
}
/**
@@ -5682,6 +5704,7 @@ void cgroup_exit(struct task_struct *tsk
if (!list_empty(&tsk->cg_list)) {
spin_lock_irq(&css_set_lock);
css_set_move_task(tsk, cset, NULL, false);
+ list_add_tail(&tsk->cg_list, &cset->dying_tasks);
cset->nr_tasks--;
spin_unlock_irq(&css_set_lock);
} else {
@@ -5702,6 +5725,13 @@ void cgroup_release(struct task_struct *
do_each_subsys_mask(ss, ssid, have_release_callback) {
ss->release(task);
} while_each_subsys_mask();
+
+ if (use_task_css_set_links) {
+ spin_lock_irq(&css_set_lock);
+ css_set_skip_task_iters(task_css_set(task), task);
+ list_del_init(&task->cg_list);
+ spin_unlock_irq(&css_set_lock);
+ }
}
void cgroup_free(struct task_struct *task)
From: Matteo Croce <[email protected]>
[ Upstream commit 230bd958c2c846ee292aa38bc6b006296c24ca01 ]
The MTU change code can call napi_disable() with the device already down,
leading to a deadlock. Also, lot of code is duplicated unnecessarily.
Rework mvpp2_change_mtu() to avoid the deadlock and remove duplicated code.
Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Matteo Croce <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 41 +++++++-----------------
1 file changed, 13 insertions(+), 28 deletions(-)
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -3501,6 +3501,7 @@ static int mvpp2_set_mac_address(struct
static int mvpp2_change_mtu(struct net_device *dev, int mtu)
{
struct mvpp2_port *port = netdev_priv(dev);
+ bool running = netif_running(dev);
int err;
if (!IS_ALIGNED(MVPP2_RX_PKT_SIZE(mtu), 8)) {
@@ -3509,40 +3510,24 @@ static int mvpp2_change_mtu(struct net_d
mtu = ALIGN(MVPP2_RX_PKT_SIZE(mtu), 8);
}
- if (!netif_running(dev)) {
- err = mvpp2_bm_update_mtu(dev, mtu);
- if (!err) {
- port->pkt_size = MVPP2_RX_PKT_SIZE(mtu);
- return 0;
- }
+ if (running)
+ mvpp2_stop_dev(port);
+ err = mvpp2_bm_update_mtu(dev, mtu);
+ if (err) {
+ netdev_err(dev, "failed to change MTU\n");
/* Reconfigure BM to the original MTU */
- err = mvpp2_bm_update_mtu(dev, dev->mtu);
- if (err)
- goto log_error;
+ mvpp2_bm_update_mtu(dev, dev->mtu);
+ } else {
+ port->pkt_size = MVPP2_RX_PKT_SIZE(mtu);
}
- mvpp2_stop_dev(port);
-
- err = mvpp2_bm_update_mtu(dev, mtu);
- if (!err) {
- port->pkt_size = MVPP2_RX_PKT_SIZE(mtu);
- goto out_start;
+ if (running) {
+ mvpp2_start_dev(port);
+ mvpp2_egress_enable(port);
+ mvpp2_ingress_enable(port);
}
- /* Reconfigure BM to the original MTU */
- err = mvpp2_bm_update_mtu(dev, dev->mtu);
- if (err)
- goto log_error;
-
-out_start:
- mvpp2_start_dev(port);
- mvpp2_egress_enable(port);
- mvpp2_ingress_enable(port);
-
- return 0;
-log_error:
- netdev_err(dev, "failed to change MTU\n");
return err;
}
From: Tejun Heo <[email protected]>
commit 6b115bf58e6f013ca75e7115aabcbd56c20ff31d upstream.
cgroup_release() calls cgroup_subsys->release() which is used by the
pids controller to uncharge its pid. We want to use it to manage
iteration of dying tasks which requires putting it before
__unhash_process(). Move cgroup_release() above __exit_signal().
While this makes it uncharge before the pid is freed, pid is RCU freed
anyway and the window is very narrow.
Signed-off-by: Tejun Heo <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
kernel/exit.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -194,6 +194,7 @@ repeat:
rcu_read_unlock();
proc_flush_task(p);
+ cgroup_release(p);
write_lock_irq(&tasklist_lock);
ptrace_release_task(p);
@@ -219,7 +220,6 @@ repeat:
}
write_unlock_irq(&tasklist_lock);
- cgroup_release(p);
release_thread(p);
call_rcu(&p->rcu, delayed_put_task_struct);
From: Nikolay Aleksandrov <[email protected]>
[ Upstream commit d7bae09fa008c6c9a489580db0a5a12063b97f97 ]
On initialization failure we have to delete the local fdb which was
inserted due to the default pvid creation. This problem has been present
since the inception of default_pvid. Note that currently there are 2 cases:
1) in br_dev_init() when br_multicast_init() fails
2) if register_netdevice() fails after calling ndo_init()
This patch takes care of both since br_vlan_flush() is called on both
occasions. Also the new fdb delete would be a no-op on normal bridge
device destruction since the local fdb would've been already flushed by
br_dev_delete(). This is not an issue for ports since nbp_vlan_init() is
called last when adding a port thus nothing can fail after it.
Reported-by: [email protected]
Fixes: 5be5a2df40f0 ("bridge: Add filtering support for default_pvid")
Signed-off-by: Nikolay Aleksandrov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/bridge/br_vlan.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/net/bridge/br_vlan.c
+++ b/net/bridge/br_vlan.c
@@ -677,6 +677,11 @@ void br_vlan_flush(struct net_bridge *br
ASSERT_RTNL();
+ /* delete auto-added default pvid local fdb before flushing vlans
+ * otherwise it will be leaked on bridge device init failure
+ */
+ br_fdb_delete_by_port(br, NULL, 0, 1);
+
vg = br_vlan_group(br);
__vlan_flush(vg);
RCU_INIT_POINTER(br->vlgrp, NULL);
From: Mark Zhang <[email protected]>
[ Upstream commit 08aa5e7da6bce1a1963f63cf32c2e7ad434ad578 ]
When lag is active, which is controlled by the bonded mlx5e netdev, mlx5
interface unregestering must happen in the reverse order where rdma is
unregistered (unloaded) first, to guarantee all references to the lag
context in hardware is removed, then remove mlx5e netdev interface which
will cleanup the lag context from hardware.
Without this fix during destroy of LAG interface, we observed following
errors:
* mlx5_cmd_check:752:(pid 12556): DESTROY_LAG(0x843) op_mod(0x0) failed,
status bad parameter(0x3), syndrome (0xe4ac33)
* mlx5_cmd_check:752:(pid 12556): DESTROY_LAG(0x843) op_mod(0x0) failed,
status bad parameter(0x3), syndrome (0xa5aee8).
Fixes: a31208b1e11d ("net/mlx5_core: New init and exit flow for mlx5_core")
Reviewed-by: Parav Pandit <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: Mark Zhang <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/dev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/dev.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/dev.c
@@ -307,7 +307,7 @@ void mlx5_unregister_device(struct mlx5_
struct mlx5_interface *intf;
mutex_lock(&mlx5_intf_mutex);
- list_for_each_entry(intf, &intf_list, list)
+ list_for_each_entry_reverse(intf, &intf_list, list)
mlx5_remove_device(intf, priv);
list_del(&priv->dev_list);
mutex_unlock(&mlx5_intf_mutex);
From: Heiner Kallweit <[email protected]>
[ Upstream commit 003bd5b4a7b4a94b501e3a1e2e7c9df6b2a94ed4 ]
It was reported that after resuming from suspend network fails with
error "do_IRQ: 3.38 No irq handler for vector", see [0]. Enabling WoL
can work around the issue, but the only actual fix is to disable MSI.
So let's mimic the behavior of the vendor driver and disable MSI on
all chip versions before RTL8168d.
[0] https://bugzilla.kernel.org/show_bug.cgi?id=204079
Fixes: 6c6aa15fdea5 ("r8169: improve interrupt handling")
Reported-by: Dušan Dragić <[email protected]>
Tested-by: Dušan Dragić <[email protected]>
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/realtek/r8169.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -7239,13 +7239,18 @@ static int rtl_alloc_irq(struct rtl8169_
{
unsigned int flags;
- if (tp->mac_version <= RTL_GIGA_MAC_VER_06) {
+ switch (tp->mac_version) {
+ case RTL_GIGA_MAC_VER_02 ... RTL_GIGA_MAC_VER_06:
RTL_W8(tp, Cfg9346, Cfg9346_Unlock);
RTL_W8(tp, Config2, RTL_R8(tp, Config2) & ~MSIEnable);
RTL_W8(tp, Cfg9346, Cfg9346_Lock);
+ /* fall through */
+ case RTL_GIGA_MAC_VER_07 ... RTL_GIGA_MAC_VER_24:
flags = PCI_IRQ_LEGACY;
- } else {
+ break;
+ default:
flags = PCI_IRQ_ALL_TYPES;
+ break;
}
return pci_alloc_irq_vectors(tp->pci_dev, 1, 1, flags);
From: Johan Hovold <[email protected]>
[ Upstream commit c3953a3c2d3175d2f9f0304c9a1ba89e7743c5e4 ]
Fix two reset-gpio sanity checks which were never converted to use
gpio_is_valid(), and make sure to use -EINVAL to indicate a missing
reset line also for the UART-driver module parameter and for the USB
driver.
This specifically prevents the UART and USB drivers from incidentally
trying to request and use gpio 0, and also avoids triggering a WARN() in
gpio_to_desc() during probe when no valid reset line has been specified.
Fixes: e33a3f84f88f ("NFC: nfcmrvl: allow gpio 0 for reset signalling")
Reported-by: [email protected]
Tested-by: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/nfc/nfcmrvl/main.c | 4 ++--
drivers/nfc/nfcmrvl/uart.c | 4 ++--
drivers/nfc/nfcmrvl/usb.c | 1 +
3 files changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/nfc/nfcmrvl/main.c
+++ b/drivers/nfc/nfcmrvl/main.c
@@ -244,7 +244,7 @@ void nfcmrvl_chip_reset(struct nfcmrvl_p
/* Reset possible fault of previous session */
clear_bit(NFCMRVL_PHY_ERROR, &priv->flags);
- if (priv->config.reset_n_io) {
+ if (gpio_is_valid(priv->config.reset_n_io)) {
nfc_info(priv->dev, "reset the chip\n");
gpio_set_value(priv->config.reset_n_io, 0);
usleep_range(5000, 10000);
@@ -255,7 +255,7 @@ void nfcmrvl_chip_reset(struct nfcmrvl_p
void nfcmrvl_chip_halt(struct nfcmrvl_private *priv)
{
- if (priv->config.reset_n_io)
+ if (gpio_is_valid(priv->config.reset_n_io))
gpio_set_value(priv->config.reset_n_io, 0);
}
--- a/drivers/nfc/nfcmrvl/uart.c
+++ b/drivers/nfc/nfcmrvl/uart.c
@@ -26,7 +26,7 @@
static unsigned int hci_muxed;
static unsigned int flow_control;
static unsigned int break_control;
-static unsigned int reset_n_io;
+static int reset_n_io = -EINVAL;
/*
** NFCMRVL NCI OPS
@@ -231,5 +231,5 @@ MODULE_PARM_DESC(break_control, "Tell if
module_param(hci_muxed, uint, 0);
MODULE_PARM_DESC(hci_muxed, "Tell if transport is muxed in HCI one.");
-module_param(reset_n_io, uint, 0);
+module_param(reset_n_io, int, 0);
MODULE_PARM_DESC(reset_n_io, "GPIO that is wired to RESET_N signal.");
--- a/drivers/nfc/nfcmrvl/usb.c
+++ b/drivers/nfc/nfcmrvl/usb.c
@@ -305,6 +305,7 @@ static int nfcmrvl_probe(struct usb_inte
/* No configuration for USB */
memset(&config, 0, sizeof(config));
+ config.reset_n_io = -EINVAL;
nfc_info(&udev->dev, "intf %p id %p\n", intf, id);
From: Tejun Heo <[email protected]>
commit b636fd38dc40113f853337a7d2a6885ad23b8811 upstream.
When a task is moved out of a cset, task iterators pointing to the
task are advanced using the normal css_task_iter_advance() call. This
is fine but we'll be tracking dying tasks on csets and thus moving
tasks from cset->tasks to (to be added) cset->dying_tasks. When we
remove a task from cset->tasks, if we advance the iterators, they may
move over to the next cset before we had the chance to add the task
back on the dying list, which can allow the task to escape iteration.
This patch separates out skipping from advancing. Skipping only moves
the affected iterators to the next pointer rather than fully advancing
it and the following advancing will recognize that the cursor has
already been moved forward and do the rest of advancing. This ensures
that when a task moves from one list to another in its cset, as long
as it moves in the right direction, it's always visible to iteration.
This doesn't cause any visible behavior changes.
Signed-off-by: Tejun Heo <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/cgroup.h | 3 ++
kernel/cgroup/cgroup.c | 60 +++++++++++++++++++++++++++++--------------------
2 files changed, 39 insertions(+), 24 deletions(-)
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -43,6 +43,9 @@
/* walk all threaded css_sets in the domain */
#define CSS_TASK_ITER_THREADED (1U << 1)
+/* internal flags */
+#define CSS_TASK_ITER_SKIPPED (1U << 16)
+
/* a css_task_iter should be treated as an opaque object */
struct css_task_iter {
struct cgroup_subsys *ss;
--- a/kernel/cgroup/cgroup.c
+++ b/kernel/cgroup/cgroup.c
@@ -212,7 +212,8 @@ static struct cftype cgroup_base_files[]
static int cgroup_apply_control(struct cgroup *cgrp);
static void cgroup_finalize_control(struct cgroup *cgrp, int ret);
-static void css_task_iter_advance(struct css_task_iter *it);
+static void css_task_iter_skip(struct css_task_iter *it,
+ struct task_struct *task);
static int cgroup_destroy_locked(struct cgroup *cgrp);
static struct cgroup_subsys_state *css_create(struct cgroup *cgrp,
struct cgroup_subsys *ss);
@@ -775,6 +776,21 @@ static void css_set_update_populated(str
cgroup_update_populated(link->cgrp, populated);
}
+/*
+ * @task is leaving, advance task iterators which are pointing to it so
+ * that they can resume at the next position. Advancing an iterator might
+ * remove it from the list, use safe walk. See css_task_iter_skip() for
+ * details.
+ */
+static void css_set_skip_task_iters(struct css_set *cset,
+ struct task_struct *task)
+{
+ struct css_task_iter *it, *pos;
+
+ list_for_each_entry_safe(it, pos, &cset->task_iters, iters_node)
+ css_task_iter_skip(it, task);
+}
+
/**
* css_set_move_task - move a task from one css_set to another
* @task: task being moved
@@ -800,22 +816,9 @@ static void css_set_move_task(struct tas
css_set_update_populated(to_cset, true);
if (from_cset) {
- struct css_task_iter *it, *pos;
-
WARN_ON_ONCE(list_empty(&task->cg_list));
- /*
- * @task is leaving, advance task iterators which are
- * pointing to it so that they can resume at the next
- * position. Advancing an iterator might remove it from
- * the list, use safe walk. See css_task_iter_advance*()
- * for details.
- */
- list_for_each_entry_safe(it, pos, &from_cset->task_iters,
- iters_node)
- if (it->task_pos == &task->cg_list)
- css_task_iter_advance(it);
-
+ css_set_skip_task_iters(from_cset, task);
list_del_init(&task->cg_list);
if (!css_set_populated(from_cset))
css_set_update_populated(from_cset, false);
@@ -4183,10 +4186,19 @@ static void css_task_iter_advance_css_se
list_add(&it->iters_node, &cset->task_iters);
}
-static void css_task_iter_advance(struct css_task_iter *it)
+static void css_task_iter_skip(struct css_task_iter *it,
+ struct task_struct *task)
{
- struct list_head *next;
+ lockdep_assert_held(&css_set_lock);
+
+ if (it->task_pos == &task->cg_list) {
+ it->task_pos = it->task_pos->next;
+ it->flags |= CSS_TASK_ITER_SKIPPED;
+ }
+}
+static void css_task_iter_advance(struct css_task_iter *it)
+{
lockdep_assert_held(&css_set_lock);
repeat:
if (it->task_pos) {
@@ -4195,15 +4207,15 @@ repeat:
* consumed first and then ->mg_tasks. After ->mg_tasks,
* we move onto the next cset.
*/
- next = it->task_pos->next;
-
- if (next == it->tasks_head)
- next = it->mg_tasks_head->next;
+ if (it->flags & CSS_TASK_ITER_SKIPPED)
+ it->flags &= ~CSS_TASK_ITER_SKIPPED;
+ else
+ it->task_pos = it->task_pos->next;
- if (next == it->mg_tasks_head)
+ if (it->task_pos == it->tasks_head)
+ it->task_pos = it->mg_tasks_head->next;
+ if (it->task_pos == it->mg_tasks_head)
css_task_iter_advance_css_set(it);
- else
- it->task_pos = next;
} else {
/* called from start, proceed to the first cset */
css_task_iter_advance_css_set(it);
From: "Ren? van Dorst" <[email protected]>
[ Upstream commit 8aace4f3eba2a3ceb431e18683ea0e1ecbade5cd ]
In phylink_parse_fixedlink() the pl->link_config.advertising bits are AND
with pl->supported, pl->supported is zeroed and only the speed/duplex
modes and MII bits are set.
So pl->link_config.advertising always loses the flow control/pause bits.
By setting Pause and Asym_Pause bits in pl->supported, the flow control
work again when devicetree "pause" is set in fixes-link node and the MAC
advertise that is supports pause.
Results with this patch.
Legend:
- DT = 'Pause' is set in the fixed-link in devicetree.
- validate() = ‘Yes’ means phylink_set(mask, Pause) is set in the
validate().
- flow = results reported my link is Up line.
+-----+------------+-------+
| DT | validate() | flow |
+-----+------------+-------+
| Yes | Yes | rx/tx |
| No | Yes | off |
| Yes | No | off |
+-----+------------+-------+
Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: René van Dorst <[email protected]>
Acked-by: Russell King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/phy/phylink.c | 2 ++
1 file changed, 2 insertions(+)
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -226,6 +226,8 @@ static int phylink_parse_fixedlink(struc
__ETHTOOL_LINK_MODE_MASK_NBITS, true);
linkmode_zero(pl->supported);
phylink_set(pl->supported, MII);
+ phylink_set(pl->supported, Pause);
+ phylink_set(pl->supported, Asym_Pause);
if (s) {
__set_bit(s->bit, pl->supported);
} else {
From: Aaron Armstrong Skomra <[email protected]>
commit 693c3dab4e50403f91bca4b52fc6d8562a3180f6 upstream.
The bit indicating BTN_6 on this device is overshifted
by 2 bits, resulting in the incorrect button being
reported.
Also fix copy-paste mistake in comments.
Signed-off-by: Aaron Armstrong Skomra <[email protected]>
Reviewed-by: Ping Cheng <[email protected]>
Link: https://github.com/linuxwacom/xf86-input-wacom/issues/71
Fixes: c7f0522a1ad1 ("HID: wacom: Slim down wacom_intuos_pad processing")
Cc: <[email protected]> # v4.5+
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/wacom_wac.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
--- a/drivers/hid/wacom_wac.c
+++ b/drivers/hid/wacom_wac.c
@@ -537,14 +537,14 @@ static int wacom_intuos_pad(struct wacom
*/
buttons = (data[4] << 1) | (data[3] & 0x01);
} else if (features->type == CINTIQ_COMPANION_2) {
- /* d-pad right -> data[4] & 0x10
- * d-pad up -> data[4] & 0x20
- * d-pad left -> data[4] & 0x40
- * d-pad down -> data[4] & 0x80
- * d-pad center -> data[3] & 0x01
+ /* d-pad right -> data[2] & 0x10
+ * d-pad up -> data[2] & 0x20
+ * d-pad left -> data[2] & 0x40
+ * d-pad down -> data[2] & 0x80
+ * d-pad center -> data[1] & 0x01
*/
buttons = ((data[2] >> 4) << 7) |
- ((data[1] & 0x04) << 6) |
+ ((data[1] & 0x04) << 4) |
((data[2] & 0x0F) << 2) |
(data[1] & 0x03);
} else if (features->type >= INTUOS5S && features->type <= INTUOSPL) {
From: Haishuang Yan <[email protected]>
[ Upstream commit 01f5bffad555f8e22a61f4b1261fe09cf1b96994 ]
ip4ip6/ip6ip6 tunnels run iptunnel_handle_offloads on xmit which
can cause a possible use-after-free accessing iph/ipv6h pointer
since the packet will be 'uncloned' running pskb_expand_head if
it is a cloned gso skb.
Fixes: 0e9a709560db ("ip6_tunnel, ip6_gre: fix setting of DSCP on encapsulated packets")
Signed-off-by: Haishuang Yan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_tunnel.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -1283,12 +1283,11 @@ ip4ip6_tnl_xmit(struct sk_buff *skb, str
}
fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL);
+ dsfield = INET_ECN_encapsulate(dsfield, ipv4_get_dsfield(iph));
if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6))
return -1;
- dsfield = INET_ECN_encapsulate(dsfield, ipv4_get_dsfield(iph));
-
skb_set_inner_ipproto(skb, IPPROTO_IPIP);
err = ip6_tnl_xmit(skb, dev, dsfield, &fl6, encap_limit, &mtu,
@@ -1372,12 +1371,11 @@ ip6ip6_tnl_xmit(struct sk_buff *skb, str
}
fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL);
+ dsfield = INET_ECN_encapsulate(dsfield, ipv6_get_dsfield(ipv6h));
if (iptunnel_handle_offloads(skb, SKB_GSO_IPXIP6))
return -1;
- dsfield = INET_ECN_encapsulate(dsfield, ipv6_get_dsfield(ipv6h));
-
skb_set_inner_ipproto(skb, IPPROTO_IPV6);
err = ip6_tnl_xmit(skb, dev, dsfield, &fl6, encap_limit, &mtu,
commit 700cd033a82d466ad8f9615f9985525e45f8960a upstream.
Namespace activation expects to be able to reference region badblocks.
The following warning sometimes triggers when asynchronous namespace
activation races in front of the completion of namespace probing. Move
all possible namespace probing after region badblocks initialization.
Otherwise, lockdep sometimes catches the uninitialized state of the
badblocks seqlock with stack trace signatures like:
INFO: trying to register non-static key.
pmem2: detected capacity change from 0 to 136365211648
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 9 PID: 358 Comm: kworker/u80:5 Tainted: G OE 5.2.0-rc4+ #3382
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.0.0 02/06/2015
Workqueue: events_unbound async_run_entry_fn
Call Trace:
dump_stack+0x85/0xc0
pmem1.12: detected capacity change from 0 to 8589934592
register_lock_class+0x56a/0x570
? check_object+0x140/0x270
__lock_acquire+0x80/0x1710
? __mutex_lock+0x39d/0x910
lock_acquire+0x9e/0x180
? nd_pfn_validate+0x28f/0x440 [libnvdimm]
badblocks_check+0x93/0x1f0
? nd_pfn_validate+0x28f/0x440 [libnvdimm]
nd_pfn_validate+0x28f/0x440 [libnvdimm]
? lockdep_hardirqs_on+0xf0/0x180
nd_dax_probe+0x9a/0x120 [libnvdimm]
nd_pmem_probe+0x6d/0x180 [nd_pmem]
nvdimm_bus_probe+0x90/0x2c0 [libnvdimm]
Fixes: 48af2f7e52f4 ("libnvdimm, pfn: during init, clear errors...")
Cc: <[email protected]>
Cc: Vishal Verma <[email protected]>
Reviewed-by: Vishal Verma <[email protected]>
Link: https://lore.kernel.org/r/156341208365.292348.1547528796026249120.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvdimm/region.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/nvdimm/region.c b/drivers/nvdimm/region.c
index b9ca0033cc999..f9130cc157e83 100644
--- a/drivers/nvdimm/region.c
+++ b/drivers/nvdimm/region.c
@@ -42,17 +42,6 @@ static int nd_region_probe(struct device *dev)
if (rc)
return rc;
- rc = nd_region_register_namespaces(nd_region, &err);
- if (rc < 0)
- return rc;
-
- ndrd = dev_get_drvdata(dev);
- ndrd->ns_active = rc;
- ndrd->ns_count = rc + err;
-
- if (rc && err && rc == err)
- return -ENODEV;
-
if (is_nd_pmem(&nd_region->dev)) {
struct resource ndr_res;
@@ -68,6 +57,17 @@ static int nd_region_probe(struct device *dev)
nvdimm_badblocks_populate(nd_region, &nd_region->bb, &ndr_res);
}
+ rc = nd_region_register_namespaces(nd_region, &err);
+ if (rc < 0)
+ return rc;
+
+ ndrd = dev_get_drvdata(dev);
+ ndrd->ns_active = rc;
+ ndrd->ns_count = rc + err;
+
+ if (rc && err && rc == err)
+ return -ENODEV;
+
nd_region->btt_seed = nd_btt_create(nd_region);
nd_region->pfn_seed = nd_pfn_create(nd_region);
nd_region->dax_seed = nd_dax_create(nd_region);
--
2.20.1
commit 6de5d06e657acdbcf9637dac37916a4a5309e0f4 upstream.
In preparation for not holding a lock over the execution of nd_ioctl(),
update the implementation to allow multiple threads to be attempting
ioctls at the same time. The bus lock still prevents multiple in-flight
->ndctl() invocations from corrupting each other's state, but static
global staging buffers are moved to the heap.
Reported-by: Vishal Verma <[email protected]>
Reviewed-by: Vishal Verma <[email protected]>
Tested-by: Vishal Verma <[email protected]>
Link: https://lore.kernel.org/r/156341208947.292348.10560140326807607481.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvdimm/bus.c | 59 +++++++++++++++++++++++++++-----------------
1 file changed, 37 insertions(+), 22 deletions(-)
diff --git a/drivers/nvdimm/bus.c b/drivers/nvdimm/bus.c
index 11cfd23e5aff7..5abcdb4faa644 100644
--- a/drivers/nvdimm/bus.c
+++ b/drivers/nvdimm/bus.c
@@ -951,20 +951,19 @@ static int __nd_ioctl(struct nvdimm_bus *nvdimm_bus, struct nvdimm *nvdimm,
int read_only, unsigned int ioctl_cmd, unsigned long arg)
{
struct nvdimm_bus_descriptor *nd_desc = nvdimm_bus->nd_desc;
- static char out_env[ND_CMD_MAX_ENVELOPE];
- static char in_env[ND_CMD_MAX_ENVELOPE];
const struct nd_cmd_desc *desc = NULL;
unsigned int cmd = _IOC_NR(ioctl_cmd);
struct device *dev = &nvdimm_bus->dev;
void __user *p = (void __user *) arg;
+ char *out_env = NULL, *in_env = NULL;
const char *cmd_name, *dimm_name;
u32 in_len = 0, out_len = 0;
unsigned int func = cmd;
unsigned long cmd_mask;
struct nd_cmd_pkg pkg;
int rc, i, cmd_rc;
+ void *buf = NULL;
u64 buf_len = 0;
- void *buf;
if (nvdimm) {
desc = nd_cmd_dimm_desc(cmd);
@@ -1004,6 +1003,9 @@ static int __nd_ioctl(struct nvdimm_bus *nvdimm_bus, struct nvdimm *nvdimm,
}
/* process an input envelope */
+ in_env = kzalloc(ND_CMD_MAX_ENVELOPE, GFP_KERNEL);
+ if (!in_env)
+ return -ENOMEM;
for (i = 0; i < desc->in_num; i++) {
u32 in_size, copy;
@@ -1011,14 +1013,17 @@ static int __nd_ioctl(struct nvdimm_bus *nvdimm_bus, struct nvdimm *nvdimm,
if (in_size == UINT_MAX) {
dev_err(dev, "%s:%s unknown input size cmd: %s field: %d\n",
__func__, dimm_name, cmd_name, i);
- return -ENXIO;
+ rc = -ENXIO;
+ goto out;
}
- if (in_len < sizeof(in_env))
- copy = min_t(u32, sizeof(in_env) - in_len, in_size);
+ if (in_len < ND_CMD_MAX_ENVELOPE)
+ copy = min_t(u32, ND_CMD_MAX_ENVELOPE - in_len, in_size);
else
copy = 0;
- if (copy && copy_from_user(&in_env[in_len], p + in_len, copy))
- return -EFAULT;
+ if (copy && copy_from_user(&in_env[in_len], p + in_len, copy)) {
+ rc = -EFAULT;
+ goto out;
+ }
in_len += in_size;
}
@@ -1030,6 +1035,12 @@ static int __nd_ioctl(struct nvdimm_bus *nvdimm_bus, struct nvdimm *nvdimm,
}
/* process an output envelope */
+ out_env = kzalloc(ND_CMD_MAX_ENVELOPE, GFP_KERNEL);
+ if (!out_env) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
for (i = 0; i < desc->out_num; i++) {
u32 out_size = nd_cmd_out_size(nvdimm, cmd, desc, i,
(u32 *) in_env, (u32 *) out_env, 0);
@@ -1038,15 +1049,18 @@ static int __nd_ioctl(struct nvdimm_bus *nvdimm_bus, struct nvdimm *nvdimm,
if (out_size == UINT_MAX) {
dev_dbg(dev, "%s unknown output size cmd: %s field: %d\n",
dimm_name, cmd_name, i);
- return -EFAULT;
+ rc = -EFAULT;
+ goto out;
}
- if (out_len < sizeof(out_env))
- copy = min_t(u32, sizeof(out_env) - out_len, out_size);
+ if (out_len < ND_CMD_MAX_ENVELOPE)
+ copy = min_t(u32, ND_CMD_MAX_ENVELOPE - out_len, out_size);
else
copy = 0;
if (copy && copy_from_user(&out_env[out_len],
- p + in_len + out_len, copy))
- return -EFAULT;
+ p + in_len + out_len, copy)) {
+ rc = -EFAULT;
+ goto out;
+ }
out_len += out_size;
}
@@ -1054,12 +1068,15 @@ static int __nd_ioctl(struct nvdimm_bus *nvdimm_bus, struct nvdimm *nvdimm,
if (buf_len > ND_IOCTL_MAX_BUFLEN) {
dev_dbg(dev, "%s cmd: %s buf_len: %llu > %d\n", dimm_name,
cmd_name, buf_len, ND_IOCTL_MAX_BUFLEN);
- return -EINVAL;
+ rc = -EINVAL;
+ goto out;
}
buf = vmalloc(buf_len);
- if (!buf)
- return -ENOMEM;
+ if (!buf) {
+ rc = -ENOMEM;
+ goto out;
+ }
if (copy_from_user(buf, p, buf_len)) {
rc = -EFAULT;
@@ -1081,17 +1098,15 @@ static int __nd_ioctl(struct nvdimm_bus *nvdimm_bus, struct nvdimm *nvdimm,
nvdimm_account_cleared_poison(nvdimm_bus, clear_err->address,
clear_err->cleared);
}
- nvdimm_bus_unlock(&nvdimm_bus->dev);
if (copy_to_user(p, buf, buf_len))
rc = -EFAULT;
- vfree(buf);
- return rc;
-
- out_unlock:
+out_unlock:
nvdimm_bus_unlock(&nvdimm_bus->dev);
- out:
+out:
+ kfree(in_env);
+ kfree(out_env);
vfree(buf);
return rc;
}
--
2.20.1
commit 8aac0e2338916e273ccbd438a2b7a1e8c61749f5 upstream.
A multithreaded namespace creation/destruction stress test currently
fails with signatures like the following:
sysfs group 'power' not found for kobject 'dax1.1'
RIP: 0010:sysfs_remove_group+0x76/0x80
Call Trace:
device_del+0x73/0x370
device_unregister+0x16/0x50
nd_async_device_unregister+0x1e/0x30 [libnvdimm]
async_run_entry_fn+0x39/0x160
process_one_work+0x23c/0x5e0
worker_thread+0x3c/0x390
BUG: kernel NULL pointer dereference, address: 0000000000000020
RIP: 0010:klist_put+0x1b/0x6c
Call Trace:
klist_del+0xe/0x10
device_del+0x8a/0x2c9
? __switch_to_asm+0x34/0x70
? __switch_to_asm+0x40/0x70
device_unregister+0x44/0x4f
nd_async_device_unregister+0x22/0x2d [libnvdimm]
async_run_entry_fn+0x47/0x15a
process_one_work+0x1a2/0x2eb
worker_thread+0x1b8/0x26e
Use the kill_device() helper to atomically resolve the race of multiple
threads issuing kill, device_unregister(), requests.
Reported-by: Jane Chu <[email protected]>
Reported-by: Erwin Tsaur <[email protected]>
Fixes: 4d88a97aa9e8 ("libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver...")
Cc: <[email protected]>
Link: https://github.com/pmem/ndctl/issues/96
Tested-by: Tested-by: Jane Chu <[email protected]>
Link: https://lore.kernel.org/r/156341207846.292348.10435719262819764054.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvdimm/bus.c | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/nvdimm/bus.c b/drivers/nvdimm/bus.c
index ee39e2c1644ae..11cfd23e5aff7 100644
--- a/drivers/nvdimm/bus.c
+++ b/drivers/nvdimm/bus.c
@@ -528,13 +528,38 @@ EXPORT_SYMBOL(nd_device_register);
void nd_device_unregister(struct device *dev, enum nd_async_mode mode)
{
+ bool killed;
+
switch (mode) {
case ND_ASYNC:
+ /*
+ * In the async case this is being triggered with the
+ * device lock held and the unregistration work needs to
+ * be moved out of line iff this is thread has won the
+ * race to schedule the deletion.
+ */
+ if (!kill_device(dev))
+ return;
+
get_device(dev);
async_schedule_domain(nd_async_device_unregister, dev,
&nd_async_domain);
break;
case ND_SYNC:
+ /*
+ * In the sync case the device is being unregistered due
+ * to a state change of the parent. Claim the kill state
+ * to synchronize against other unregistration requests,
+ * or otherwise let the async path handle it if the
+ * unregistration was already queued.
+ */
+ device_lock(dev);
+ killed = kill_device(dev);
+ device_unlock(dev);
+
+ if (!killed)
+ return;
+
nd_synchronize();
device_unregister(dev);
break;
--
2.20.1
From: Haishuang Yan <[email protected]>
[ Upstream commit 3bc817d665ac6d9de89f59df522ad86f5b5dfc03 ]
Since ip6_tnl_parse_tlv_enc_lim() can call pskb_may_pull()
which may change skb->data, so we need to re-load ipv6h at
the right place.
Fixes: 898b29798e36 ("ip6_gre: Refactor ip6gre xmit codes")
Cc: William Tu <[email protected]>
Signed-off-by: Haishuang Yan <[email protected]>
Acked-by: William Tu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/ipv6/ip6_gre.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -680,12 +680,13 @@ static int prepare_ip6gre_xmit_ipv6(stru
struct flowi6 *fl6, __u8 *dsfield,
int *encap_limit)
{
- struct ipv6hdr *ipv6h = ipv6_hdr(skb);
+ struct ipv6hdr *ipv6h;
struct ip6_tnl *t = netdev_priv(dev);
__u16 offset;
offset = ip6_tnl_parse_tlv_enc_lim(skb, skb_network_header(skb));
/* ip6_tnl_parse_tlv_enc_lim() might have reallocated skb->head */
+ ipv6h = ipv6_hdr(skb);
if (offset > 0) {
struct ipv6_tlv_tnl_enc_lim *tel;
From: Linus Torvalds <[email protected]>
commit cf676908846a06443fa5e6724ca3f5dd7460eca1 upstream.
I'm not sure what made gcc warn about this code now. The 'ret' variable
does end up initialized in all cases, but it's definitely not obvious,
so the compiler is quite reasonable to warn about this.
So just add initialization to make it all much more obvious both to
compilers and to humans.
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/i2c/i2c-core-base.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -185,7 +185,7 @@ static int i2c_generic_bus_free(struct i
int i2c_generic_scl_recovery(struct i2c_adapter *adap)
{
struct i2c_bus_recovery_info *bri = adap->bus_recovery_info;
- int i = 0, scl = 1, ret;
+ int i = 0, scl = 1, ret = 0;
if (bri->prepare_recovery)
bri->prepare_recovery(adap);
From: Jiri Pirko <[email protected]>
[ Upstream commit 55b40dbf0e76b4bfb9d8b3a16a0208640a9a45df ]
Commit aca51397d014 ("netns: Fix arbitrary net_device-s corruptions
on net_ns stop.") introduced a possibility to hit a BUG in case device
is returning back to init_net and two following conditions are met:
1) dev->ifindex value is used in a name of another "dev%d"
device in init_net.
2) dev->name is used by another device in init_net.
Under real life circumstances this is hard to get. Therefore this has
been present happily for over 10 years. To reproduce:
$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff
3: enp0s2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
$ ip netns add ns1
$ ip -n ns1 link add dummy1ns1 type dummy
$ ip -n ns1 link add dummy2ns1 type dummy
$ ip link set enp0s2 netns ns1
$ ip -n ns1 link set enp0s2 name dummy0
[ 100.858894] virtio_net virtio0 dummy0: renamed from enp0s2
$ ip link add dev4 type dummy
$ ip -n ns1 a
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: dummy1ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 16:63:4c:38:3e:ff brd ff:ff:ff:ff:ff:ff
3: dummy2ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether aa:9e:86:dd:6b:5d brd ff:ff:ff:ff:ff:ff
4: dummy0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff
4: dev4: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 5a:e1:4a:b6:ec:f8 brd ff:ff:ff:ff:ff:ff
$ ip netns del ns1
[ 158.717795] default_device_exit: failed to move dummy0 to init_net: -17
[ 158.719316] ------------[ cut here ]------------
[ 158.720591] kernel BUG at net/core/dev.c:9824!
[ 158.722260] invalid opcode: 0000 [#1] SMP KASAN PTI
[ 158.723728] CPU: 0 PID: 56 Comm: kworker/u2:1 Not tainted 5.3.0-rc1+ #18
[ 158.725422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
[ 158.727508] Workqueue: netns cleanup_net
[ 158.728915] RIP: 0010:default_device_exit.cold+0x1d/0x1f
[ 158.730683] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e
[ 158.736854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282
[ 158.738752] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000
[ 158.741369] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64
[ 158.743418] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c
[ 158.745626] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000
[ 158.748405] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72
[ 158.750638] FS: 0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000
[ 158.752944] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 158.755245] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0
[ 158.757654] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 158.760012] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 158.762758] Call Trace:
[ 158.763882] ? dev_change_net_namespace+0xbb0/0xbb0
[ 158.766148] ? devlink_nl_cmd_set_doit+0x520/0x520
[ 158.768034] ? dev_change_net_namespace+0xbb0/0xbb0
[ 158.769870] ops_exit_list.isra.0+0xa8/0x150
[ 158.771544] cleanup_net+0x446/0x8f0
[ 158.772945] ? unregister_pernet_operations+0x4a0/0x4a0
[ 158.775294] process_one_work+0xa1a/0x1740
[ 158.776896] ? pwq_dec_nr_in_flight+0x310/0x310
[ 158.779143] ? do_raw_spin_lock+0x11b/0x280
[ 158.780848] worker_thread+0x9e/0x1060
[ 158.782500] ? process_one_work+0x1740/0x1740
[ 158.784454] kthread+0x31b/0x420
[ 158.786082] ? __kthread_create_on_node+0x3f0/0x3f0
[ 158.788286] ret_from_fork+0x3a/0x50
[ 158.789871] ---[ end trace defd6c657c71f936 ]---
[ 158.792273] RIP: 0010:default_device_exit.cold+0x1d/0x1f
[ 158.795478] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e
[ 158.804854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282
[ 158.807865] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000
[ 158.811794] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64
[ 158.816652] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c
[ 158.820930] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000
[ 158.825113] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72
[ 158.829899] FS: 0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000
[ 158.834923] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 158.838164] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0
[ 158.841917] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 158.845149] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Fix this by checking if a device with the same name exists in init_net
and fallback to original code - dev%d to allocate name - in case it does.
This was found using syzkaller.
Fixes: aca51397d014 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.")
Signed-off-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/core/dev.c | 2 ++
1 file changed, 2 insertions(+)
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -9510,6 +9510,8 @@ static void __net_exit default_device_ex
/* Push remaining network devices to init_net */
snprintf(fb_name, IFNAMSIZ, "dev%d", dev->ifindex);
+ if (__dev_get_by_name(&init_net, fb_name))
+ snprintf(fb_name, IFNAMSIZ, "dev%%d");
err = dev_change_net_namespace(dev, &init_net, fb_name);
if (err) {
pr_emerg("%s: failed to move %s to init_net: %d\n",
From: Qian Cai <[email protected]>
[ Upstream commit 60d60c8fbd8d1acf25b041ecd72ae4fa16e9405b ]
The commit 069d11465a80 ("net/mlx5e: RX, Enhance legacy Receive Queue
memory scheme") introduced an undefined behaviour below due to
"frag->last_in_page" is only initialized in mlx5e_init_frags_partition()
when,
if (next_frag.offset + frag_info[f].frag_stride > PAGE_SIZE)
or after bailed out the loop,
for (i = 0; i < mlx5_wq_cyc_get_size(&rq->wqe.wq); i++)
As the result, there could be some "frag" have uninitialized
value of "last_in_page".
Later, get_frag() obtains those "frag" and check "frag->last_in_page" in
mlx5e_put_rx_frag() and triggers the error during boot. Fix it by always
initializing "frag->last_in_page" to "false" in
mlx5e_init_frags_partition().
UBSAN: Undefined behaviour in
drivers/net/ethernet/mellanox/mlx5/core/en_rx.c:325:12
load of value 170 is not a valid value for type 'bool' (aka '_Bool')
Call trace:
dump_backtrace+0x0/0x264
show_stack+0x20/0x2c
dump_stack+0xb0/0x104
__ubsan_handle_load_invalid_value+0x104/0x128
mlx5e_handle_rx_cqe+0x8e8/0x12cc [mlx5_core]
mlx5e_poll_rx_cq+0xca8/0x1a94 [mlx5_core]
mlx5e_napi_poll+0x17c/0xa30 [mlx5_core]
net_rx_action+0x248/0x940
__do_softirq+0x350/0x7b8
irq_exit+0x200/0x26c
__handle_domain_irq+0xc8/0x128
gic_handle_irq+0x138/0x228
el1_irq+0xb8/0x140
arch_cpu_idle+0x1a4/0x348
do_idle+0x114/0x1b0
cpu_startup_entry+0x24/0x28
rest_init+0x1ac/0x1dc
arch_call_rest_init+0x10/0x18
start_kernel+0x4d4/0x57c
Fixes: 069d11465a80 ("net/mlx5e: RX, Enhance legacy Receive Queue memory scheme")
Signed-off-by: Qian Cai <[email protected]>
Reviewed-by: Tariq Toukan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -420,12 +420,11 @@ static inline u64 mlx5e_get_mpwqe_offset
static void mlx5e_init_frags_partition(struct mlx5e_rq *rq)
{
- struct mlx5e_wqe_frag_info next_frag, *prev;
+ struct mlx5e_wqe_frag_info next_frag = {};
+ struct mlx5e_wqe_frag_info *prev = NULL;
int i;
next_frag.di = &rq->wqe.di[0];
- next_frag.offset = 0;
- prev = NULL;
for (i = 0; i < mlx5_wq_cyc_get_size(&rq->wqe.wq); i++) {
struct mlx5e_rq_frag_info *frag_info = &rq->wqe.info.arr[0];
From: Edward Srouji <[email protected]>
[ Upstream commit 7a32f2962c56d9d8a836b4469855caeee8766bd4 ]
Fix modify_cq_in alignment to match the device specification.
After this fix the 'cq_umem_valid' field will be in the right offset.
Cc: <[email protected]> # 4.19
Fixes: bd37197554eb ("net/mlx5: Update mlx5_ifc with DEVX UID bits")
Signed-off-by: Edward Srouji <[email protected]>
Reviewed-by: Yishai Hadas <[email protected]>
Signed-off-by: Leon Romanovsky <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
include/linux/mlx5/mlx5_ifc.h | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
--- a/include/linux/mlx5/mlx5_ifc.h
+++ b/include/linux/mlx5/mlx5_ifc.h
@@ -5623,7 +5623,12 @@ struct mlx5_ifc_modify_cq_in_bits {
struct mlx5_ifc_cqc_bits cq_context;
- u8 reserved_at_280[0x600];
+ u8 reserved_at_280[0x60];
+
+ u8 cq_umem_valid[0x1];
+ u8 reserved_at_2e1[0x1f];
+
+ u8 reserved_at_300[0x580];
u8 pas[0][0x40];
};
From: Ursula Braun <[email protected]>
[ Upstream commit f9cedf1a9b1cdcfb0c52edb391d01771e43994a4 ]
The setsockopts options TCP_NODELAY and TCP_CORK may schedule the
tx worker. Make sure the socket is not yet moved into SMC_CLOSED
state (for instance by a shutdown SHUT_RDWR call).
Reported-by: [email protected]
Reported-by: [email protected]
Fixes: 01d2f7e2cdd31 ("net/smc: sockopts TCP_NODELAY and TCP_CORK")
Signed-off-by: Ursula Braun <[email protected]>
Signed-off-by: Karsten Graul <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/smc/af_smc.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -1680,14 +1680,18 @@ static int smc_setsockopt(struct socket
}
break;
case TCP_NODELAY:
- if (sk->sk_state != SMC_INIT && sk->sk_state != SMC_LISTEN) {
+ if (sk->sk_state != SMC_INIT &&
+ sk->sk_state != SMC_LISTEN &&
+ sk->sk_state != SMC_CLOSED) {
if (val && !smc->use_fallback)
mod_delayed_work(system_wq, &smc->conn.tx_work,
0);
}
break;
case TCP_CORK:
- if (sk->sk_state != SMC_INIT && sk->sk_state != SMC_LISTEN) {
+ if (sk->sk_state != SMC_INIT &&
+ sk->sk_state != SMC_LISTEN &&
+ sk->sk_state != SMC_CLOSED) {
if (!val && !smc->use_fallback)
mod_delayed_work(system_wq, &smc->conn.tx_work,
0);
From: Jia-Ju Bai <[email protected]>
[ Upstream commit 051c7b39be4a91f6b7d8c4548444e4b850f1f56c ]
In dequeue_func(), there is an if statement on line 74 to check whether
skb is NULL:
if (skb)
When skb is NULL, it is used on line 77:
prefetch(&skb->end);
Thus, a possible null-pointer dereference may occur.
To fix this bug, skb->end is used when skb is not NULL.
This bug is found by a static analysis tool STCheck written by us.
Fixes: 76e3cc126bb2 ("codel: Controlled Delay AQM")
Signed-off-by: Jia-Ju Bai <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/sch_codel.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/net/sched/sch_codel.c
+++ b/net/sched/sch_codel.c
@@ -71,10 +71,10 @@ static struct sk_buff *dequeue_func(stru
struct Qdisc *sch = ctx;
struct sk_buff *skb = __qdisc_dequeue_head(&sch->q);
- if (skb)
+ if (skb) {
sch->qstats.backlog -= qdisc_pkt_len(skb);
-
- prefetch(&skb->end); /* we'll need skb_shinfo() */
+ prefetch(&skb->end); /* we'll need skb_shinfo() */
+ }
return skb;
}
From: Subash Abhinov Kasiviswanathan <[email protected]>
[ Upstream commit a7cf3d24ee6081930feb4c830a7f6f16ebe31c49 ]
The udp_ip4_ind bit is set only for IPv4 UDP non-fragmented packets
so that the hardware can flip the checksum to 0xFFFF if the computed
checksum is 0 per RFC768.
However, this bit had to be set for IPv6 UDP non fragmented packets
as well per hardware requirements. Otherwise, IPv6 UDP packets
with computed checksum as 0 were transmitted by hardware and were
dropped in the network.
In addition to setting this bit for IPv6 UDP, the field is also
appropriately renamed to udp_ind as part of this change.
Fixes: 5eb5f8608ef1 ("net: qualcomm: rmnet: Add support for TX checksum offload")
Cc: Sean Tranchetti <[email protected]>
Signed-off-by: Subash Abhinov Kasiviswanathan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/qualcomm/rmnet/rmnet_map.h | 2 +-
drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c | 13 +++++++++----
2 files changed, 10 insertions(+), 5 deletions(-)
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_map.h
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_map.h
@@ -59,7 +59,7 @@ struct rmnet_map_dl_csum_trailer {
struct rmnet_map_ul_csum_header {
__be16 csum_start_offset;
u16 csum_insert_offset:14;
- u16 udp_ip4_ind:1;
+ u16 udp_ind:1;
u16 csum_enabled:1;
} __aligned(1);
--- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c
+++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_map_data.c
@@ -215,9 +215,9 @@ rmnet_map_ipv4_ul_csum_header(void *iphd
ul_header->csum_insert_offset = skb->csum_offset;
ul_header->csum_enabled = 1;
if (ip4h->protocol == IPPROTO_UDP)
- ul_header->udp_ip4_ind = 1;
+ ul_header->udp_ind = 1;
else
- ul_header->udp_ip4_ind = 0;
+ ul_header->udp_ind = 0;
/* Changing remaining fields to network order */
hdr++;
@@ -248,6 +248,7 @@ rmnet_map_ipv6_ul_csum_header(void *ip6h
struct rmnet_map_ul_csum_header *ul_header,
struct sk_buff *skb)
{
+ struct ipv6hdr *ip6h = (struct ipv6hdr *)ip6hdr;
__be16 *hdr = (__be16 *)ul_header, offset;
offset = htons((__force u16)(skb_transport_header(skb) -
@@ -255,7 +256,11 @@ rmnet_map_ipv6_ul_csum_header(void *ip6h
ul_header->csum_start_offset = offset;
ul_header->csum_insert_offset = skb->csum_offset;
ul_header->csum_enabled = 1;
- ul_header->udp_ip4_ind = 0;
+
+ if (ip6h->nexthdr == IPPROTO_UDP)
+ ul_header->udp_ind = 1;
+ else
+ ul_header->udp_ind = 0;
/* Changing remaining fields to network order */
hdr++;
@@ -428,7 +433,7 @@ sw_csum:
ul_header->csum_start_offset = 0;
ul_header->csum_insert_offset = 0;
ul_header->csum_enabled = 0;
- ul_header->udp_ip4_ind = 0;
+ ul_header->udp_ind = 0;
priv->stats.csum_sw++;
}
From: Sebastian Parschauer <[email protected]>
commit 49869d2ea9eecc105a10724c1abf035151a3c4e2 upstream.
The PixArt OEM mice are known for disconnecting every minute in
runlevel 1 or 3 if they are not always polled. So add quirk
ALWAYS_POLL for this one as well.
Jonathan Teh (@jonathan-teh) reported and tested the quirk.
Reference: https://github.com/sriemer/fix-linux-mouse/issues/15
Signed-off-by: Sebastian Parschauer <[email protected]>
CC: [email protected]
Signed-off-by: Jiri Kosina <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/hid/hid-ids.h | 1 +
drivers/hid/hid-quirks.c | 1 +
2 files changed, 2 insertions(+)
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -559,6 +559,7 @@
#define USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0B4A 0x0b4a
#define USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE 0x134a
#define USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_094A 0x094a
+#define USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_0641 0x0641
#define USB_VENDOR_ID_HUION 0x256c
#define USB_DEVICE_ID_HUION_TABLET 0x006e
--- a/drivers/hid/hid-quirks.c
+++ b/drivers/hid/hid-quirks.c
@@ -94,6 +94,7 @@ static const struct hid_device_id hid_qu
{ HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_LOGITECH_OEM_USB_OPTICAL_MOUSE_0B4A), HID_QUIRK_ALWAYS_POLL },
{ HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE), HID_QUIRK_ALWAYS_POLL },
{ HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_094A), HID_QUIRK_ALWAYS_POLL },
+ { HID_USB_DEVICE(USB_VENDOR_ID_HP, USB_PRODUCT_ID_HP_PIXART_OEM_USB_OPTICAL_MOUSE_0641), HID_QUIRK_ALWAYS_POLL },
{ HID_USB_DEVICE(USB_VENDOR_ID_IDEACOM, USB_DEVICE_ID_IDEACOM_IDC6680), HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_INNOMEDIA, USB_DEVICE_ID_INNEX_GENESIS_ATARI), HID_QUIRK_MULTI_INPUT },
{ HID_USB_DEVICE(USB_VENDOR_ID_KYE, USB_DEVICE_ID_KYE_EASYPEN_M610X), HID_QUIRK_MULTI_INPUT },
From: Cong Wang <[email protected]>
[ Upstream commit c8ec4632c6ac9cda0e8c3d51aa41eeab66585bd5 ]
act_ife at least requires TCA_IFE_PARMS, so we have to bail out
when there is no attribute passed in.
Reported-by: [email protected]
Fixes: ef6980b6becb ("introduce IFE action")
Cc: Jamal Hadi Salim <[email protected]>
Cc: Jiri Pirko <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/sched/act_ife.c | 5 +++++
1 file changed, 5 insertions(+)
--- a/net/sched/act_ife.c
+++ b/net/sched/act_ife.c
@@ -484,6 +484,11 @@ static int tcf_ife_init(struct net *net,
int ret = 0;
int err;
+ if (!nla) {
+ NL_SET_ERR_MSG_MOD(extack, "IFE requires attributes to be passed");
+ return -EINVAL;
+ }
+
err = nla_parse_nested(tb, TCA_IFE_MAX, nla, ife_policy, NULL);
if (err < 0)
return err;
commit ca6bf264f6d856f959c4239cda1047b587745c67 upstream.
A multithreaded namespace creation/destruction stress test currently
deadlocks with the following lockup signature:
INFO: task ndctl:2924 blocked for more than 122 seconds.
Tainted: G OE 5.2.0-rc4+ #3382
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ndctl D 0 2924 1176 0x00000000
Call Trace:
? __schedule+0x27e/0x780
schedule+0x30/0xb0
wait_nvdimm_bus_probe_idle+0x8a/0xd0 [libnvdimm]
? finish_wait+0x80/0x80
uuid_store+0xe6/0x2e0 [libnvdimm]
kernfs_fop_write+0xf0/0x1a0
vfs_write+0xb7/0x1b0
ksys_write+0x5c/0xd0
do_syscall_64+0x60/0x240
INFO: task ndctl:2923 blocked for more than 122 seconds.
Tainted: G OE 5.2.0-rc4+ #3382
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
ndctl D 0 2923 1175 0x00000000
Call Trace:
? __schedule+0x27e/0x780
? __mutex_lock+0x489/0x910
schedule+0x30/0xb0
schedule_preempt_disabled+0x11/0x20
__mutex_lock+0x48e/0x910
? nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm]
? __lock_acquire+0x23f/0x1710
? nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm]
nvdimm_namespace_common_probe+0x95/0x4d0 [libnvdimm]
__dax_pmem_probe+0x5e/0x210 [dax_pmem_core]
? nvdimm_bus_probe+0x1d0/0x2c0 [libnvdimm]
dax_pmem_probe+0xc/0x20 [dax_pmem]
nvdimm_bus_probe+0x90/0x2c0 [libnvdimm]
really_probe+0xef/0x390
driver_probe_device+0xb4/0x100
In this sequence an 'nd_dax' device is being probed and trying to take
the lock on its backing namespace to validate that the 'nd_dax' device
indeed has exclusive access to the backing namespace. Meanwhile, another
thread is trying to update the uuid property of that same backing
namespace. So one thread is in the probe path trying to acquire the
lock, and the other thread has acquired the lock and tries to flush the
probe path.
Fix this deadlock by not holding the namespace device_lock over the
wait_nvdimm_bus_probe_idle() synchronization step. In turn this requires
the device_lock to be held on entry to wait_nvdimm_bus_probe_idle() and
subsequently dropped internally to wait_nvdimm_bus_probe_idle().
Cc: <[email protected]>
Fixes: bf9bccc14c05 ("libnvdimm: pmem label sets and namespace instantiation")
Cc: Vishal Verma <[email protected]>
Tested-by: Jane Chu <[email protected]>
Link: https://lore.kernel.org/r/156341210094.292348.2384694131126767789.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/nvdimm/bus.c | 14 +++++++++-----
drivers/nvdimm/region_devs.c | 4 ++++
2 files changed, 13 insertions(+), 5 deletions(-)
diff --git a/drivers/nvdimm/bus.c b/drivers/nvdimm/bus.c
index 5abcdb4faa644..2ba22cd1331b0 100644
--- a/drivers/nvdimm/bus.c
+++ b/drivers/nvdimm/bus.c
@@ -865,10 +865,12 @@ void wait_nvdimm_bus_probe_idle(struct device *dev)
do {
if (nvdimm_bus->probe_active == 0)
break;
- nvdimm_bus_unlock(&nvdimm_bus->dev);
+ nvdimm_bus_unlock(dev);
+ device_unlock(dev);
wait_event(nvdimm_bus->wait,
nvdimm_bus->probe_active == 0);
- nvdimm_bus_lock(&nvdimm_bus->dev);
+ device_lock(dev);
+ nvdimm_bus_lock(dev);
} while (true);
}
@@ -994,7 +996,7 @@ static int __nd_ioctl(struct nvdimm_bus *nvdimm_bus, struct nvdimm *nvdimm,
case ND_CMD_ARS_START:
case ND_CMD_CLEAR_ERROR:
case ND_CMD_CALL:
- dev_dbg(&nvdimm_bus->dev, "'%s' command while read-only.\n",
+ dev_dbg(dev, "'%s' command while read-only.\n",
nvdimm ? nvdimm_cmd_name(cmd)
: nvdimm_bus_cmd_name(cmd));
return -EPERM;
@@ -1083,7 +1085,8 @@ static int __nd_ioctl(struct nvdimm_bus *nvdimm_bus, struct nvdimm *nvdimm,
goto out;
}
- nvdimm_bus_lock(&nvdimm_bus->dev);
+ device_lock(dev);
+ nvdimm_bus_lock(dev);
rc = nd_cmd_clear_to_send(nvdimm_bus, nvdimm, func, buf);
if (rc)
goto out_unlock;
@@ -1103,7 +1106,8 @@ static int __nd_ioctl(struct nvdimm_bus *nvdimm_bus, struct nvdimm *nvdimm,
rc = -EFAULT;
out_unlock:
- nvdimm_bus_unlock(&nvdimm_bus->dev);
+ nvdimm_bus_unlock(dev);
+ device_unlock(dev);
out:
kfree(in_env);
kfree(out_env);
diff --git a/drivers/nvdimm/region_devs.c b/drivers/nvdimm/region_devs.c
index e7377f1028ef6..0303296e6d5b6 100644
--- a/drivers/nvdimm/region_devs.c
+++ b/drivers/nvdimm/region_devs.c
@@ -425,10 +425,12 @@ static ssize_t available_size_show(struct device *dev,
* memory nvdimm_bus_lock() is dropped, but that's userspace's
* problem to not race itself.
*/
+ device_lock(dev);
nvdimm_bus_lock(dev);
wait_nvdimm_bus_probe_idle(dev);
available = nd_region_available_dpa(nd_region);
nvdimm_bus_unlock(dev);
+ device_unlock(dev);
return sprintf(buf, "%llu\n", available);
}
@@ -440,10 +442,12 @@ static ssize_t max_available_extent_show(struct device *dev,
struct nd_region *nd_region = to_nd_region(dev);
unsigned long long available = 0;
+ device_lock(dev);
nvdimm_bus_lock(dev);
wait_nvdimm_bus_probe_idle(dev);
available = nd_region_allocatable_dpa(nd_region);
nvdimm_bus_unlock(dev);
+ device_unlock(dev);
return sprintf(buf, "%llu\n", available);
}
--
2.20.1
From: Arnd Bergmann <[email protected]>
[ Upstream commit 055d88242a6046a1ceac3167290f054c72571cd9 ]
Support for handling the PPPOEIOCSFWD ioctl in compat mode was added in
linux-2.5.69 along with hundreds of other commands, but was always broken
sincen only the structure is compatible, but the command number is not,
due to the size being sizeof(size_t), or at first sizeof(sizeof((struct
sockaddr_pppox)), which is different on 64-bit architectures.
Guillaume Nault adds:
And the implementation was broken until 2016 (see 29e73269aa4d ("pppoe:
fix reference counting in PPPoE proxy")), and nobody ever noticed. I
should probably have removed this ioctl entirely instead of fixing it.
Clearly, it has never been used.
Fix it by adding a compat_ioctl handler for all pppoe variants that
translates the command number and then calls the regular ioctl function.
All other ioctl commands handled by pppoe are compatible between 32-bit
and 64-bit, and require compat_ptr() conversion.
This should apply to all stable kernels.
Acked-by: Guillaume Nault <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ppp/pppoe.c | 3 +++
drivers/net/ppp/pppox.c | 13 +++++++++++++
drivers/net/ppp/pptp.c | 3 +++
fs/compat_ioctl.c | 3 ---
include/linux/if_pppox.h | 3 +++
net/l2tp/l2tp_ppp.c | 3 +++
6 files changed, 25 insertions(+), 3 deletions(-)
--- a/drivers/net/ppp/pppoe.c
+++ b/drivers/net/ppp/pppoe.c
@@ -1120,6 +1120,9 @@ static const struct proto_ops pppoe_ops
.recvmsg = pppoe_recvmsg,
.mmap = sock_no_mmap,
.ioctl = pppox_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = pppox_compat_ioctl,
+#endif
};
static const struct pppox_proto pppoe_proto = {
--- a/drivers/net/ppp/pppox.c
+++ b/drivers/net/ppp/pppox.c
@@ -22,6 +22,7 @@
#include <linux/string.h>
#include <linux/module.h>
#include <linux/kernel.h>
+#include <linux/compat.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/net.h>
@@ -103,6 +104,18 @@ int pppox_ioctl(struct socket *sock, uns
EXPORT_SYMBOL(pppox_ioctl);
+#ifdef CONFIG_COMPAT
+int pppox_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg)
+{
+ if (cmd == PPPOEIOCSFWD32)
+ cmd = PPPOEIOCSFWD;
+
+ return pppox_ioctl(sock, cmd, (unsigned long)compat_ptr(arg));
+}
+
+EXPORT_SYMBOL(pppox_compat_ioctl);
+#endif
+
static int pppox_create(struct net *net, struct socket *sock, int protocol,
int kern)
{
--- a/drivers/net/ppp/pptp.c
+++ b/drivers/net/ppp/pptp.c
@@ -633,6 +633,9 @@ static const struct proto_ops pptp_ops =
.recvmsg = sock_no_recvmsg,
.mmap = sock_no_mmap,
.ioctl = pppox_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = pppox_compat_ioctl,
+#endif
};
static const struct pppox_proto pppox_pptp_proto = {
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -894,9 +894,6 @@ COMPATIBLE_IOCTL(PPPIOCDISCONN)
COMPATIBLE_IOCTL(PPPIOCATTCHAN)
COMPATIBLE_IOCTL(PPPIOCGCHAN)
COMPATIBLE_IOCTL(PPPIOCGL2TPSTATS)
-/* PPPOX */
-COMPATIBLE_IOCTL(PPPOEIOCSFWD)
-COMPATIBLE_IOCTL(PPPOEIOCDFWD)
/* Big A */
/* sparc only */
/* Big Q for sound/OSS */
--- a/include/linux/if_pppox.h
+++ b/include/linux/if_pppox.h
@@ -84,6 +84,9 @@ extern int register_pppox_proto(int prot
extern void unregister_pppox_proto(int proto_num);
extern void pppox_unbind_sock(struct sock *sk);/* delete ppp-channel binding */
extern int pppox_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
+extern int pppox_compat_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg);
+
+#define PPPOEIOCSFWD32 _IOW(0xB1 ,0, compat_size_t)
/* PPPoX socket states */
enum {
--- a/net/l2tp/l2tp_ppp.c
+++ b/net/l2tp/l2tp_ppp.c
@@ -1686,6 +1686,9 @@ static const struct proto_ops pppol2tp_o
.recvmsg = pppol2tp_recvmsg,
.mmap = sock_no_mmap,
.ioctl = pppox_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = pppox_compat_ioctl,
+#endif
};
static const struct pppox_proto pppol2tp_proto = {
From: Lukas Wunner <[email protected]>
commit 8d8bef50365847134b51c1ec46786bc2873e4e47 upstream.
Commit 6935224da248 ("spi: bcm2835: enable support of 3-wire mode")
added 3-wire support to the BCM2835 SPI driver by setting the REN bit
(Read Enable) in the CS register when receiving data. The REN bit puts
the transmitter in high-impedance state. The driver recognizes that
data is to be received by checking whether the rx_buf of a transfer is
non-NULL.
Commit 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers
meeting certain conditions") subsequently broke 3-wire support because
it set the SPI_MASTER_MUST_RX flag which causes spi_map_msg() to replace
rx_buf with a dummy buffer if it is NULL. As a result, rx_buf is
*always* non-NULL if DMA is enabled.
Reinstate 3-wire support by not only checking whether rx_buf is non-NULL,
but also checking that it is not the dummy buffer.
Fixes: 3ecd37edaa2a ("spi: bcm2835: enable dma modes for transfers meeting certain conditions")
Reported-by: Nuno Sá <[email protected]>
Signed-off-by: Lukas Wunner <[email protected]>
Cc: [email protected] # v4.2+
Cc: Martin Sperl <[email protected]>
Acked-by: Stefan Wahren <[email protected]>
Link: https://lore.kernel.org/r/328318841455e505370ef8ecad97b646c033dc8a.1562148527.git.lukas@wunner.de
Signed-off-by: Mark Brown <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/spi/spi-bcm2835.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/spi/spi-bcm2835.c
+++ b/drivers/spi/spi-bcm2835.c
@@ -554,7 +554,8 @@ static int bcm2835_spi_transfer_one(stru
bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv);
/* handle all the 3-wire mode */
- if ((spi->mode & SPI_3WIRE) && (tfr->rx_buf))
+ if (spi->mode & SPI_3WIRE && tfr->rx_buf &&
+ tfr->rx_buf != master->dummy_rx)
cs |= BCM2835_SPI_CS_REN;
else
cs &= ~BCM2835_SPI_CS_REN;
From: Ariel Levkovich <[email protected]>
[ Upstream commit 90bb769291161cf25a818d69cf608c181654473e ]
This patch prevents a race between user invoked cached counters
query and a neighbor last usage updater.
The cached flow counter stats can be queried by calling
"mlx5_fc_query_cached" which provides the number of bytes and
packets that passed via this flow since the last time this counter
was queried.
It does so by reducting the last saved stats from the current, cached
stats and then updating the last saved stats with the cached stats.
It also provide the lastuse value for that flow.
Since "mlx5e_tc_update_neigh_used_value" needs to retrieve the
last usage time of encapsulation flows, it calls the flow counter
query method periodically and async to user queries of the flow counter
using cls_flower.
This call is causing the driver to update the last reported bytes and
packets from the cache and therefore, future user queries of the flow
stats will return lower than expected number for bytes and packets
since the last saved stats in the driver was updated async to the last
saved stats in cls_flower.
This causes wrong stats presentation of encapsulation flows to user.
Since the neighbor usage updater only needs the lastuse stats from the
cached counter, the fix is to use a dedicated lastuse query call that
returns the lastuse value without synching between the cached stats and
the last saved stats.
Fixes: f6dfb4c3f216 ("net/mlx5e: Update neighbour 'used' state using HW flow rules counters")
Signed-off-by: Ariel Levkovich <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 4 ++--
drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c | 5 +++++
include/linux/mlx5/fs.h | 1 +
3 files changed, 8 insertions(+), 2 deletions(-)
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
@@ -992,13 +992,13 @@ void mlx5e_tc_encap_flows_del(struct mlx
void mlx5e_tc_update_neigh_used_value(struct mlx5e_neigh_hash_entry *nhe)
{
struct mlx5e_neigh *m_neigh = &nhe->m_neigh;
- u64 bytes, packets, lastuse = 0;
struct mlx5e_tc_flow *flow;
struct mlx5e_encap_entry *e;
struct mlx5_fc *counter;
struct neigh_table *tbl;
bool neigh_used = false;
struct neighbour *n;
+ u64 lastuse;
if (m_neigh->family == AF_INET)
tbl = &arp_tbl;
@@ -1015,7 +1015,7 @@ void mlx5e_tc_update_neigh_used_value(st
list_for_each_entry(flow, &e->flows, encap) {
if (flow->flags & MLX5E_TC_FLOW_OFFLOADED) {
counter = mlx5_flow_rule_counter(flow->rule[0]);
- mlx5_fc_query_cached(counter, &bytes, &packets, &lastuse);
+ lastuse = mlx5_fc_query_lastuse(counter);
if (time_after((unsigned long)lastuse, nhe->reported_lastuse)) {
neigh_used = true;
break;
--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_counters.c
@@ -321,6 +321,11 @@ int mlx5_fc_query(struct mlx5_core_dev *
}
EXPORT_SYMBOL(mlx5_fc_query);
+u64 mlx5_fc_query_lastuse(struct mlx5_fc *counter)
+{
+ return counter->cache.lastuse;
+}
+
void mlx5_fc_query_cached(struct mlx5_fc *counter,
u64 *bytes, u64 *packets, u64 *lastuse)
{
--- a/include/linux/mlx5/fs.h
+++ b/include/linux/mlx5/fs.h
@@ -188,6 +188,7 @@ int mlx5_modify_rule_destination(struct
struct mlx5_fc *mlx5_flow_rule_counter(struct mlx5_flow_handle *handler);
struct mlx5_fc *mlx5_fc_create(struct mlx5_core_dev *dev, bool aging);
void mlx5_fc_destroy(struct mlx5_core_dev *dev, struct mlx5_fc *counter);
+u64 mlx5_fc_query_lastuse(struct mlx5_fc *counter);
void mlx5_fc_query_cached(struct mlx5_fc *counter,
u64 *bytes, u64 *packets, u64 *lastuse);
int mlx5_fc_query(struct mlx5_core_dev *dev, struct mlx5_fc *counter,
commit 3451a495ef244a88ed6317a035299d835554d579 upstream.
Add an additional bit flag to the device_private struct named "dead".
This additional flag provides a guarantee that when a device_del is
executed on a given interface an async worker will not attempt to attach
the driver following the earlier device_del call. Previously this
guarantee was not present and could result in the device_del call
attempting to remove a driver from an interface only to have the async
worker attempt to probe the driver later when it finally completes the
asynchronous probe call.
One additional change added was that I pulled the check for dev->driver
out of the __device_attach_driver call and instead placed it in the
__device_attach_async_helper call. This was motivated by the fact that the
only other caller of this, __device_attach, had already taken the
device_lock() and checked for dev->driver. Instead of testing for this
twice in this path it makes more sense to just consolidate the dev->dead
and dev->driver checks together into one set of checks.
Reviewed-by: Dan Williams <[email protected]>
Reviewed-by: Rafael J. Wysocki <[email protected]>
Signed-off-by: Alexander Duyck <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/base/base.h | 4 ++++
drivers/base/core.c | 11 +++++++++++
drivers/base/dd.c | 22 +++++++++++-----------
3 files changed, 26 insertions(+), 11 deletions(-)
diff --git a/drivers/base/base.h b/drivers/base/base.h
index 7a419a7a6235b..559b047de9f75 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -66,6 +66,9 @@ struct driver_private {
* probed first.
* @device - pointer back to the struct device that this structure is
* associated with.
+ * @dead - This device is currently either in the process of or has been
+ * removed from the system. Any asynchronous events scheduled for this
+ * device should exit without taking any action.
*
* Nothing outside of the driver core should ever touch these fields.
*/
@@ -76,6 +79,7 @@ struct device_private {
struct klist_node knode_bus;
struct list_head deferred_probe;
struct device *device;
+ u8 dead:1;
};
#define to_device_private_parent(obj) \
container_of(obj, struct device_private, knode_parent)
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 92e2c32c22270..37a90d72f3736 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -2050,6 +2050,17 @@ void device_del(struct device *dev)
struct kobject *glue_dir = NULL;
struct class_interface *class_intf;
+ /*
+ * Hold the device lock and set the "dead" flag to guarantee that
+ * the update behavior is consistent with the other bitfields near
+ * it and that we cannot have an asynchronous probe routine trying
+ * to run while we are tearing out the bus/class/sysfs from
+ * underneath the device.
+ */
+ device_lock(dev);
+ dev->p->dead = true;
+ device_unlock(dev);
+
/* Notify clients of device removal. This call must come
* before dpm_sysfs_remove().
*/
diff --git a/drivers/base/dd.c b/drivers/base/dd.c
index d48b310c47603..11d24a552ee49 100644
--- a/drivers/base/dd.c
+++ b/drivers/base/dd.c
@@ -725,15 +725,6 @@ static int __device_attach_driver(struct device_driver *drv, void *_data)
bool async_allowed;
int ret;
- /*
- * Check if device has already been claimed. This may
- * happen with driver loading, device discovery/registration,
- * and deferred probe processing happens all at once with
- * multiple threads.
- */
- if (dev->driver)
- return -EBUSY;
-
ret = driver_match_device(drv, dev);
if (ret == 0) {
/* no match */
@@ -768,6 +759,15 @@ static void __device_attach_async_helper(void *_dev, async_cookie_t cookie)
device_lock(dev);
+ /*
+ * Check if device has already been removed or claimed. This may
+ * happen with driver loading, device discovery/registration,
+ * and deferred probe processing happens all at once with
+ * multiple threads.
+ */
+ if (dev->p->dead || dev->driver)
+ goto out_unlock;
+
if (dev->parent)
pm_runtime_get_sync(dev->parent);
@@ -778,7 +778,7 @@ static void __device_attach_async_helper(void *_dev, async_cookie_t cookie)
if (dev->parent)
pm_runtime_put(dev->parent);
-
+out_unlock:
device_unlock(dev);
put_device(dev);
@@ -891,7 +891,7 @@ static int __driver_attach(struct device *dev, void *data)
if (dev->parent && dev->bus->need_parent_lock)
device_lock(dev->parent);
device_lock(dev);
- if (!dev->driver)
+ if (!dev->p->dead && !dev->driver)
driver_probe_device(drv, dev);
device_unlock(dev);
if (dev->parent && dev->bus->need_parent_lock)
--
2.20.1
From: Alexis Bauvin <[email protected]>
[ Upstream commit 4b663366246be1d1d4b1b8b01245b2e88ad9e706 ]
- v1 -> v2: Move skb_set_owner_w to __tun_build_skb to reduce patch size
Small packets going out of a tap device go through an optimized code
path that uses build_skb() rather than sock_alloc_send_pskb(). The
latter calls skb_set_owner_w(), but the small packet code path does not.
The net effect is that small packets are not owned by the userland
application's socket (e.g. QEMU), while large packets are.
This can be seen with a TCP session, where packets are not owned when
the window size is small enough (around PAGE_SIZE), while they are once
the window grows (note that this requires the host to support virtio
tso for the guest to offload segmentation).
All this leads to inconsistent behaviour in the kernel, especially on
netfilter modules that uses sk->socket (e.g. xt_owner).
Fixes: 66ccbc9c87c2 ("tap: use build_skb() for small packet")
Signed-off-by: Alexis Bauvin <[email protected]>
Acked-by: Jason Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/net/tun.c | 1 +
1 file changed, 1 insertion(+)
--- a/drivers/net/tun.c
+++ b/drivers/net/tun.c
@@ -1682,6 +1682,7 @@ static struct sk_buff *tun_build_skb(str
skb_reserve(skb, pad - delta);
skb_put(skb, len);
+ skb_set_owner_w(skb, tfile->socket.sk);
get_page(alloc_frag->page);
alloc_frag->offset += buflen;
On 8/8/19 1:04 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.66 release.
> There are 45 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat 10 Aug 2019 07:03:19 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.66-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On Fri, 9 Aug 2019 at 00:39, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.19.66 release.
> There are 45 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat 10 Aug 2019 07:03:19 PM UTC.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.19.66-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.19.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.19.66-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.19.y
git commit: d43238541496ae2b216aaac84e0933bb06eeb0a6
git describe: v4.19.64-128-gd43238541496
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.19-oe/build/v4.19.64-128-gd43238541496
No regressions (compared to build v4.19.64)
No fixes (compared to build v4.19.64)
Ran 23168 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* kselftest
* libgpiod
* libhugetlbfs
* ltp-cap_bounds-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-timers-tests
* perf
* spectre-meltdown-checker-test
* v4l2-compliance
* ltp-commands-tests
* ltp-fs-tests
* ltp-math-tests
* ltp-syscalls-tests
* network-basic-tests
* ltp-open-posix-tests
* kvm-unit-tests
* ssuite
* kselftest-vsyscall-mode-native
* kselftest-vsyscall-mode-none
--
Linaro LKFT
https://lkft.linaro.org
On Thu, Aug 08, 2019 at 09:04:46PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.19.66 release.
> There are 45 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sat 10 Aug 2019 07:03:19 PM UTC.
> Anything received after that time might be too late.
>
Build results:
total: 156 pass: 156 fail: 0
Qemu test results:
total: 390 pass: 390 fail: 0
Guenter
Hi!
> From: Edward Srouji <[email protected]>
>
> [ Upstream commit 7a32f2962c56d9d8a836b4469855caeee8766bd4 ]
>
> Fix modify_cq_in alignment to match the device specification.
> After this fix the 'cq_umem_valid' field will be in the right
> offset.
Is it neccessary for v4.19 stable? The cq_umem_valid field is not
there, and it is not needed by subsequent patch.
Best regards,
Pavel
> +++ b/include/linux/mlx5/mlx5_ifc.h
> @@ -5623,7 +5623,12 @@ struct mlx5_ifc_modify_cq_in_bits {
>
> struct mlx5_ifc_cqc_bits cq_context;
>
> - u8 reserved_at_280[0x600];
> + u8 reserved_at_280[0x60];
> +
> + u8 cq_umem_valid[0x1];
> + u8 reserved_at_2e1[0x1f];
> +
> + u8 reserved_at_300[0x580];
>
> u8 pas[0][0x40];
> };
>
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
On Sat, Aug 10, 2019 at 01:25:45PM +0200, Pavel Machek wrote:
> Hi!
>
> > From: Edward Srouji <[email protected]>
> >
> > [ Upstream commit 7a32f2962c56d9d8a836b4469855caeee8766bd4 ]
> >
> > Fix modify_cq_in alignment to match the device specification.
> > After this fix the 'cq_umem_valid' field will be in the right
> > offset.
>
> Is it neccessary for v4.19 stable? The cq_umem_valid field is not
> there, and it is not needed by subsequent patch.
The change is in hardware specification file which we prefer to keep
right and upto date for our partners who use stable@ trees.
Necessary - no
Beneficial and useful - yes
Thanks