2019-08-14 09:22:54

by Charles Keepax

Subject: [PATCH v2 1/2] mfd: madera: Update DT binding document to support clock supplies

Add the 3 input clock sources for the chip into the device tree binding
document.

Signed-off-by: Charles Keepax <[email protected]>
---

No changes since v1.

Thanks,
Charles

Documentation/devicetree/bindings/mfd/madera.txt | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/madera.txt b/Documentation/devicetree/bindings/mfd/madera.txt
index cad0f28005027..47e2b8bc60519 100644
--- a/Documentation/devicetree/bindings/mfd/madera.txt
+++ b/Documentation/devicetree/bindings/mfd/madera.txt
@@ -67,6 +67,14 @@ Optional properties:
As defined in bindings/gpio.txt.
Although optional, it is strongly recommended to use a hardware reset

+ - clocks: Should reference the clocks supplied on MCLK1, MCLK2 and MCLK3
+ - clock-names: May contain up to three strings:
+ "mclk1" for the clock supplied on MCLK1, recommended to be a high
+ quality audio reference clock
+ "mclk2" for the clock supplied on MCLK2, required to be an always on
+ 32k clock
+ "mclk3" for the clock supplied on MCLK3
+
- MICBIASx : Initial data for the MICBIAS regulators, as covered in
Documentation/devicetree/bindings/regulator/regulator.txt.
One for each MICBIAS generator (MICBIAS1, MICBIAS2, ...)
--
2.11.0

2019-08-27 16:19:40

by Rob Herring (Arm)

Subject: Re: [PATCH v2 1/2] mfd: madera: Update DT binding document to support clock supplies

On Wed, 14 Aug 2019 10:21:39 +0100, Charles Keepax wrote:
> Add the 3 input clock sources for the chip into the device tree binding
> document.
>
> Signed-off-by: Charles Keepax <[email protected]>
> ---
>
> No changes since v1.
>
> Thanks,
> Charles
>
> Documentation/devicetree/bindings/mfd/madera.txt | 8 ++++++++
> 1 file changed, 8 insertions(+)
>

Reviewed-by: Rob Herring <[email protected]>