Hello,
This patchset adds common clock driver for Bitmain BM1880 SoC clock
controller. The clock controller consists of gate, divider, mux
and pll clocks with different compositions. Hence, the driver uses
composite clock structure in place where multiple clocking units are
combined together.
This patchset also removes UART fixed clock and sources clocks from clock
controller for Sophon Edge board where the driver has been validated.
Thanks,
Mani
Changes in v3:
* Switched to clk_hw_{register/unregister} APIs
* Returned clk_hw from the in-driver registration helpers
Changes in v2:
* Converted the dt binding to YAML
* Incorporated review comments from Stephen (majority of change is switching
to new way of specifying clk parents)
Manivannan Sadhasivam (8):
clk: Zero init clk_init_data in helpers
clk: Warn if clk_init_data is not zero initialized
clk: Add clk_hw_unregister_composite helper function definition
dt-bindings: clock: Add devicetree binding for BM1880 SoC
arm64: dts: bitmain: Add clock controller support for BM1880 SoC
arm64: dts: bitmain: Source common clock for UART controllers
clk: Add common clock driver for BM1880 SoC
MAINTAINERS: Add entry for BM1880 SoC clock driver
.../bindings/clock/bitmain,bm1880-clk.yaml | 83 ++
MAINTAINERS | 2 +
.../boot/dts/bitmain/bm1880-sophon-edge.dts | 9 -
arch/arm64/boot/dts/bitmain/bm1880.dtsi | 28 +
drivers/clk/Kconfig | 6 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-bm1880.c | 966 ++++++++++++++++++
drivers/clk/clk-composite.c | 13 +-
drivers/clk/clk-divider.c | 2 +-
drivers/clk/clk-fixed-rate.c | 2 +-
drivers/clk/clk-gate.c | 2 +-
drivers/clk/clk-mux.c | 2 +-
drivers/clk/clk.c | 8 +
include/dt-bindings/clock/bm1880-clock.h | 82 ++
14 files changed, 1192 insertions(+), 14 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
create mode 100644 drivers/clk/clk-bm1880.c
create mode 100644 include/dt-bindings/clock/bm1880-clock.h
--
2.17.1
The clk_init_data struct needs to be initialized to zero for the new
parent_map implementation to work correctly. Otherwise, the member which
is available first will get processed.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
drivers/clk/clk-composite.c | 2 +-
drivers/clk/clk-divider.c | 2 +-
drivers/clk/clk-fixed-rate.c | 2 +-
drivers/clk/clk-gate.c | 2 +-
drivers/clk/clk-mux.c | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c
index b06038b8f658..4d579f9d20f6 100644
--- a/drivers/clk/clk-composite.c
+++ b/drivers/clk/clk-composite.c
@@ -208,7 +208,7 @@ struct clk_hw *clk_hw_register_composite(struct device *dev, const char *name,
unsigned long flags)
{
struct clk_hw *hw;
- struct clk_init_data init;
+ struct clk_init_data init = { NULL };
struct clk_composite *composite;
struct clk_ops *clk_composite_ops;
int ret;
diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
index 3f9ff78c4a2a..65dd8137f9ec 100644
--- a/drivers/clk/clk-divider.c
+++ b/drivers/clk/clk-divider.c
@@ -471,7 +471,7 @@ static struct clk_hw *_register_divider(struct device *dev, const char *name,
{
struct clk_divider *div;
struct clk_hw *hw;
- struct clk_init_data init;
+ struct clk_init_data init = { NULL };
int ret;
if (clk_divider_flags & CLK_DIVIDER_HIWORD_MASK) {
diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c
index a7e4aef7a376..746c3ecdc5b3 100644
--- a/drivers/clk/clk-fixed-rate.c
+++ b/drivers/clk/clk-fixed-rate.c
@@ -58,7 +58,7 @@ struct clk_hw *clk_hw_register_fixed_rate_with_accuracy(struct device *dev,
{
struct clk_fixed_rate *fixed;
struct clk_hw *hw;
- struct clk_init_data init;
+ struct clk_init_data init = { NULL };
int ret;
/* allocate fixed-rate clock */
diff --git a/drivers/clk/clk-gate.c b/drivers/clk/clk-gate.c
index 1b99fc962745..8ed83ec730cb 100644
--- a/drivers/clk/clk-gate.c
+++ b/drivers/clk/clk-gate.c
@@ -141,7 +141,7 @@ struct clk_hw *clk_hw_register_gate(struct device *dev, const char *name,
{
struct clk_gate *gate;
struct clk_hw *hw;
- struct clk_init_data init;
+ struct clk_init_data init = { NULL };
int ret;
if (clk_gate_flags & CLK_GATE_HIWORD_MASK) {
diff --git a/drivers/clk/clk-mux.c b/drivers/clk/clk-mux.c
index 66e91f740508..2caa6b2a9ee5 100644
--- a/drivers/clk/clk-mux.c
+++ b/drivers/clk/clk-mux.c
@@ -153,7 +153,7 @@ struct clk_hw *clk_hw_register_mux_table(struct device *dev, const char *name,
{
struct clk_mux *mux;
struct clk_hw *hw;
- struct clk_init_data init;
+ struct clk_init_data init = { NULL };
u8 width = 0;
int ret;
--
2.17.1
The new implementation for determining parent map uses multiple ways
to pass parent info. The order in which it gets processed depends on
the first available member. Hence, it is necessary to zero init the
clk_init_data struct so that the expected member gets processed correctly.
So, add a warning if multiple clk_init_data members are available during
clk registration.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
drivers/clk/clk.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
index c0990703ce54..7d6d6984c979 100644
--- a/drivers/clk/clk.c
+++ b/drivers/clk/clk.c
@@ -3497,6 +3497,14 @@ static int clk_core_populate_parent_map(struct clk_core *core)
if (!num_parents)
return 0;
+ /*
+ * Check for non-zero initialized clk_init_data struct. This is
+ * required because, we only require one of the (parent_names/
+ * parent_data/parent_hws) to be set at a time. Otherwise, the
+ * current code would use first available member.
+ */
+ WARN_ON((parent_names && parent_data) || (parent_names && parent_hws));
+
/*
* Avoid unnecessary string look-ups of clk_core's possible parents by
* having a cache of names/clk_hw pointers to clk_core pointers.
--
2.17.1
Add YAML devicetree binding for Bitmain BM1880 SoC.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
.../bindings/clock/bitmain,bm1880-clk.yaml | 83 +++++++++++++++++++
include/dt-bindings/clock/bm1880-clock.h | 82 ++++++++++++++++++
2 files changed, 165 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
create mode 100644 include/dt-bindings/clock/bm1880-clock.h
diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
new file mode 100644
index 000000000000..a457f996287d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bindings/clock/bitmain,bm1880-clk.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bitmain BM1880 Clock Controller
+
+maintainers:
+ - Manivannan Sadhasivam <[email protected]>
+
+description: |
+ The Bitmain BM1880 clock controller generates and supplies clock to
+ various peripherals within the SoC.
+
+ This binding uses common clock bindings
+ [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - bitmain,bm1880-clk
+
+ reg:
+ minItems: 2
+ maxItems: 2
+ items:
+ - description: pll registers
+ - description: system registers
+
+ reg-names:
+ items:
+ - const: pll
+ - const: sys
+
+ clocks:
+ maxItems: 1
+ description: Phandle of the input reference clock
+
+ clock-names:
+ maxItems: 1
+ items:
+ - const: osc
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - '#clock-cells'
+
+examples:
+ # Clock controller node:
+ - |
+ clk: clock-controller@e8 {
+ compatible = "bitmain,bm1880-clk";
+ reg = <0xe8 0x0c>, <0x800 0xb0>;
+ reg-names = "pll", "sys";
+ clocks = <&osc>;
+ clock-names = "osc";
+ #clock-cells = <1>;
+ };
+
+ # Example UART controller node that consumes clock generated by the clock controller:
+ - |
+ uart0: serial@58018000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x58018000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>;
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
+ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+...
diff --git a/include/dt-bindings/clock/bm1880-clock.h b/include/dt-bindings/clock/bm1880-clock.h
new file mode 100644
index 000000000000..895646d66b07
--- /dev/null
+++ b/include/dt-bindings/clock/bm1880-clock.h
@@ -0,0 +1,82 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Device Tree binding constants for Bitmain BM1880 SoC
+ *
+ * Copyright (c) 2019 Linaro Ltd.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BM1880_H
+#define __DT_BINDINGS_CLOCK_BM1880_H
+
+#define BM1880_CLK_OSC 0
+#define BM1880_CLK_MPLL 1
+#define BM1880_CLK_SPLL 2
+#define BM1880_CLK_FPLL 3
+#define BM1880_CLK_DDRPLL 4
+#define BM1880_CLK_A53 5
+#define BM1880_CLK_50M_A53 6
+#define BM1880_CLK_AHB_ROM 7
+#define BM1880_CLK_AXI_SRAM 8
+#define BM1880_CLK_DDR_AXI 9
+#define BM1880_CLK_EFUSE 10
+#define BM1880_CLK_APB_EFUSE 11
+#define BM1880_CLK_AXI5_EMMC 12
+#define BM1880_CLK_EMMC 13
+#define BM1880_CLK_100K_EMMC 14
+#define BM1880_CLK_AXI5_SD 15
+#define BM1880_CLK_SD 16
+#define BM1880_CLK_100K_SD 17
+#define BM1880_CLK_500M_ETH0 18
+#define BM1880_CLK_AXI4_ETH0 19
+#define BM1880_CLK_500M_ETH1 20
+#define BM1880_CLK_AXI4_ETH1 21
+#define BM1880_CLK_AXI1_GDMA 22
+#define BM1880_CLK_APB_GPIO 23
+#define BM1880_CLK_APB_GPIO_INTR 24
+#define BM1880_CLK_GPIO_DB 25
+#define BM1880_CLK_AXI1_MINER 26
+#define BM1880_CLK_AHB_SF 27
+#define BM1880_CLK_SDMA_AXI 28
+#define BM1880_CLK_SDMA_AUD 29
+#define BM1880_CLK_APB_I2C 30
+#define BM1880_CLK_APB_WDT 31
+#define BM1880_CLK_APB_JPEG 32
+#define BM1880_CLK_JPEG_AXI 33
+#define BM1880_CLK_AXI5_NF 34
+#define BM1880_CLK_APB_NF 35
+#define BM1880_CLK_NF 36
+#define BM1880_CLK_APB_PWM 37
+#define BM1880_CLK_DIV_0_RV 38
+#define BM1880_CLK_DIV_1_RV 39
+#define BM1880_CLK_MUX_RV 40
+#define BM1880_CLK_RV 41
+#define BM1880_CLK_APB_SPI 42
+#define BM1880_CLK_TPU_AXI 43
+#define BM1880_CLK_DIV_UART_500M 44
+#define BM1880_CLK_UART_500M 45
+#define BM1880_CLK_APB_UART 46
+#define BM1880_CLK_APB_I2S 47
+#define BM1880_CLK_AXI4_USB 48
+#define BM1880_CLK_APB_USB 49
+#define BM1880_CLK_125M_USB 50
+#define BM1880_CLK_33K_USB 51
+#define BM1880_CLK_DIV_12M_USB 52
+#define BM1880_CLK_12M_USB 53
+#define BM1880_CLK_APB_VIDEO 54
+#define BM1880_CLK_VIDEO_AXI 55
+#define BM1880_CLK_VPP_AXI 56
+#define BM1880_CLK_APB_VPP 57
+#define BM1880_CLK_DIV_0_AXI1 58
+#define BM1880_CLK_DIV_1_AXI1 59
+#define BM1880_CLK_AXI1 60
+#define BM1880_CLK_AXI2 61
+#define BM1880_CLK_AXI3 62
+#define BM1880_CLK_AXI4 63
+#define BM1880_CLK_AXI5 64
+#define BM1880_CLK_DIV_0_AXI6 65
+#define BM1880_CLK_DIV_1_AXI6 66
+#define BM1880_CLK_MUX_AXI6 67
+#define BM1880_CLK_AXI6 68
+#define BM1880_NR_CLKS 69
+
+#endif /* __DT_BINDINGS_CLOCK_BM1880_H */
--
2.17.1
Add clock controller support for Bitmain BM1880 SoC.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
arch/arm64/boot/dts/bitmain/bm1880.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index d65453f99a99..8471662413da 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -4,6 +4,7 @@
* Author: Manivannan Sadhasivam <[email protected]>
*/
+#include <dt-bindings/clock/bm1880-clock.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset/bitmain,bm1880-reset.h>
@@ -66,6 +67,12 @@
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
+ osc: osc {
+ compatible = "fixed-clock";
+ clock-frequency = <25000000>;
+ #clock-cells = <0>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
@@ -94,6 +101,15 @@
reg = <0x400 0x120>;
};
+ clk: clock-controller@e8 {
+ compatible = "bitmain,bm1880-clk";
+ reg = <0xe8 0x0c>, <0x800 0xb0>;
+ reg-names = "pll", "sys";
+ clocks = <&osc>;
+ clock-names = "osc";
+ #clock-cells = <1>;
+ };
+
rst: reset-controller@c00 {
compatible = "bitmain,bm1880-reset";
reg = <0xc00 0x8>;
--
2.17.1
Remove fixed clock and source common clock for UART controllers.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts | 9 ---------
arch/arm64/boot/dts/bitmain/bm1880.dtsi | 12 ++++++++++++
2 files changed, 12 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
index 3e8c70778e24..7a2c7f9c2660 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
+++ b/arch/arm64/boot/dts/bitmain/bm1880-sophon-edge.dts
@@ -49,12 +49,6 @@
reg = <0x1 0x00000000 0x0 0x40000000>; // 1GB
};
- uart_clk: uart-clk {
- compatible = "fixed-clock";
- clock-frequency = <500000000>;
- #clock-cells = <0>;
- };
-
soc {
gpio0: gpio@50027000 {
porta: gpio-controller@0 {
@@ -173,21 +167,18 @@
&uart0 {
status = "okay";
- clocks = <&uart_clk>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0_default>;
};
&uart1 {
status = "okay";
- clocks = <&uart_clk>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1_default>;
};
&uart2 {
status = "okay";
- clocks = <&uart_clk>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2_default>;
};
diff --git a/arch/arm64/boot/dts/bitmain/bm1880.dtsi b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
index 8471662413da..fa6e6905f588 100644
--- a/arch/arm64/boot/dts/bitmain/bm1880.dtsi
+++ b/arch/arm64/boot/dts/bitmain/bm1880.dtsi
@@ -174,6 +174,9 @@
uart0: serial@58018000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x58018000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -184,6 +187,9 @@
uart1: serial@5801A000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801a000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -194,6 +200,9 @@
uart2: serial@5801C000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801c000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
@@ -204,6 +213,9 @@
uart3: serial@5801E000 {
compatible = "snps,dw-apb-uart";
reg = <0x0 0x5801e000 0x0 0x2000>;
+ clocks = <&clk BM1880_CLK_UART_500M>,
+ <&clk BM1880_CLK_APB_UART>;
+ clock-names = "baudclk", "apb_pclk";
interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
--
2.17.1
This function has been delcared but not defined anywhere. Hence, this
commit adds definition for it.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
drivers/clk/clk-composite.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/clk/clk-composite.c b/drivers/clk/clk-composite.c
index 4d579f9d20f6..ccca58a6d271 100644
--- a/drivers/clk/clk-composite.c
+++ b/drivers/clk/clk-composite.c
@@ -344,3 +344,14 @@ void clk_unregister_composite(struct clk *clk)
clk_unregister(clk);
kfree(composite);
}
+
+void clk_hw_unregister_composite(struct clk_hw *hw)
+{
+ struct clk_composite *composite;
+
+ composite = to_clk_composite(hw);
+
+ clk_hw_unregister(hw);
+ kfree(composite);
+}
+EXPORT_SYMBOL_GPL(clk_hw_unregister_composite);
--
2.17.1
Add common clock driver for Bitmain BM1880 SoC. The clock controller on
BM1880 has supplies clocks to all peripherals in the form of gate clocks
and composite clocks (fixed factor + gate).
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
drivers/clk/Kconfig | 6 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-bm1880.c | 966 +++++++++++++++++++++++++++++++++++++++
3 files changed, 973 insertions(+)
create mode 100644 drivers/clk/clk-bm1880.c
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 801fa1cd0321..9dc19d16d9d9 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -139,6 +139,12 @@ config COMMON_CLK_SI570
This driver supports Silicon Labs 570/571/598/599 programmable
clock generators.
+config COMMON_CLK_BM1880
+ bool "Clock driver for Bitmain BM1880 SoC"
+ depends on ARCH_BITMAIN || COMPILE_TEST
+ help
+ This driver supports the clocks on Bitmain BM1880 SoC.
+
config COMMON_CLK_CDCE706
tristate "Clock driver for TI CDCE706 clock synthesizer"
depends on I2C
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 0cad76021297..2c1ae6289a78 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_MACH_ASM9260) += clk-asm9260.o
obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
obj-$(CONFIG_ARCH_AXXIA) += clk-axm5516.o
obj-$(CONFIG_COMMON_CLK_BD718XX) += clk-bd718x7.o
+obj-$(CONFIG_COMMON_CLK_BM1880) += clk-bm1880.o
obj-$(CONFIG_COMMON_CLK_CDCE706) += clk-cdce706.o
obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-cdce925.o
obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
diff --git a/drivers/clk/clk-bm1880.c b/drivers/clk/clk-bm1880.c
new file mode 100644
index 000000000000..3b10de929fd4
--- /dev/null
+++ b/drivers/clk/clk-bm1880.c
@@ -0,0 +1,966 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Bitmain BM1880 SoC clock driver
+ *
+ * Copyright (c) 2019 Linaro Ltd.
+ * Author: Manivannan Sadhasivam <[email protected]>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/clock/bm1880-clock.h>
+
+#define BM1880_CLK_MPLL_CTL 0x00
+#define BM1880_CLK_SPLL_CTL 0x04
+#define BM1880_CLK_FPLL_CTL 0x08
+#define BM1880_CLK_DDRPLL_CTL 0x0c
+
+#define BM1880_CLK_ENABLE0 0x00
+#define BM1880_CLK_ENABLE1 0x04
+#define BM1880_CLK_SELECT 0x20
+#define BM1880_CLK_DIV0 0x40
+#define BM1880_CLK_DIV1 0x44
+#define BM1880_CLK_DIV2 0x48
+#define BM1880_CLK_DIV3 0x4c
+#define BM1880_CLK_DIV4 0x50
+#define BM1880_CLK_DIV5 0x54
+#define BM1880_CLK_DIV6 0x58
+#define BM1880_CLK_DIV7 0x5c
+#define BM1880_CLK_DIV8 0x60
+#define BM1880_CLK_DIV9 0x64
+#define BM1880_CLK_DIV10 0x68
+#define BM1880_CLK_DIV11 0x6c
+#define BM1880_CLK_DIV12 0x70
+#define BM1880_CLK_DIV13 0x74
+#define BM1880_CLK_DIV14 0x78
+#define BM1880_CLK_DIV15 0x7c
+#define BM1880_CLK_DIV16 0x80
+#define BM1880_CLK_DIV17 0x84
+#define BM1880_CLK_DIV18 0x88
+#define BM1880_CLK_DIV19 0x8c
+#define BM1880_CLK_DIV20 0x90
+#define BM1880_CLK_DIV21 0x94
+#define BM1880_CLK_DIV22 0x98
+#define BM1880_CLK_DIV23 0x9c
+#define BM1880_CLK_DIV24 0xa0
+#define BM1880_CLK_DIV25 0xa4
+#define BM1880_CLK_DIV26 0xa8
+#define BM1880_CLK_DIV27 0xac
+#define BM1880_CLK_DIV28 0xb0
+
+#define to_bm1880_pll_clk(_hw) container_of(_hw, struct bm1880_pll_hw_clock, hw)
+#define to_bm1880_div_clk(_hw) container_of(_hw, struct bm1880_div_hw_clock, hw)
+
+static DEFINE_SPINLOCK(bm1880_clk_lock);
+
+struct bm1880_clock_data {
+ void __iomem *pll_base;
+ void __iomem *sys_base;
+ struct clk_hw_onecell_data *clk_data;
+};
+
+struct bm1880_gate_clock {
+ unsigned int id;
+ const char *name;
+ const char *parent;
+ u32 gate_reg;
+ s8 gate_shift;
+ unsigned long flags;
+};
+
+struct bm1880_mux_clock {
+ unsigned int id;
+ const char *name;
+ const char * const *parents;
+ s8 num_parents;
+ u32 reg;
+ s8 shift;
+ unsigned long flags;
+};
+
+struct bm1880_div_clock {
+ unsigned int id;
+ const char *name;
+ u32 reg;
+ u8 shift;
+ u8 width;
+ u32 initval;
+ const struct clk_div_table *table;
+ unsigned long flags;
+};
+
+struct bm1880_div_hw_clock {
+ struct bm1880_div_clock div;
+ void __iomem *base;
+ spinlock_t *lock;
+ struct clk_hw hw;
+ struct clk_init_data init;
+};
+
+struct bm1880_composite_clock {
+ unsigned int id;
+ const char *name;
+ const char *parent;
+ const char * const *parents;
+ unsigned int num_parents;
+ unsigned long flags;
+
+ u32 gate_reg;
+ u32 mux_reg;
+ u32 div_reg;
+
+ s8 gate_shift;
+ s8 mux_shift;
+ s8 div_shift;
+ s8 div_width;
+ s16 div_initval;
+ const struct clk_div_table *table;
+};
+
+struct bm1880_pll_clock {
+ unsigned int id;
+ const char *name;
+ u32 reg;
+ unsigned long flags;
+};
+
+struct bm1880_pll_hw_clock {
+ struct bm1880_pll_clock pll;
+ void __iomem *base;
+ struct clk_hw hw;
+ struct clk_init_data init;
+};
+
+static const struct clk_ops bm1880_pll_ops;
+static const struct clk_ops bm1880_clk_div_ops;
+
+#define GATE_DIV(_id, _name, _parent, _gate_reg, _gate_shift, _div_reg, \
+ _div_shift, _div_width, _div_initval, _table, \
+ _flags) { \
+ .id = _id, \
+ .parent = _parent, \
+ .name = _name, \
+ .gate_reg = _gate_reg, \
+ .gate_shift = _gate_shift, \
+ .div_reg = _div_reg, \
+ .div_shift = _div_shift, \
+ .div_width = _div_width, \
+ .div_initval = _div_initval, \
+ .table = _table, \
+ .mux_shift = -1, \
+ .flags = _flags, \
+ }
+
+#define GATE_MUX(_id, _name, _parents, _gate_reg, _gate_shift, \
+ _mux_reg, _mux_shift, _flags) { \
+ .id = _id, \
+ .parents = _parents, \
+ .num_parents = ARRAY_SIZE(_parents), \
+ .name = _name, \
+ .gate_reg = _gate_reg, \
+ .gate_shift = _gate_shift, \
+ .div_shift = -1, \
+ .mux_reg = _mux_reg, \
+ .mux_shift = _mux_shift, \
+ .flags = _flags, \
+ }
+
+#define CLK_PLL(_id, _name, _parent, _reg, _flags) { \
+ .pll.id = _id, \
+ .pll.name = _name, \
+ .pll.reg = _reg, \
+ .hw.init = CLK_HW_INIT_PARENTS_DATA(_name, _parent, \
+ &bm1880_pll_ops, \
+ _flags), \
+ }
+
+#define CLK_DIV(_id, _name, _parent, _reg, _shift, _width, _initval, \
+ _table, _flags) { \
+ .div.id = _id, \
+ .div.name = _name, \
+ .div.reg = _reg, \
+ .div.shift = _shift, \
+ .div.width = _width, \
+ .div.initval = _initval, \
+ .div.table = _table, \
+ .hw.init = CLK_HW_INIT_HW(_name, _parent, \
+ &bm1880_clk_div_ops, \
+ _flags), \
+ }
+
+static struct clk_parent_data bm1880_pll_parent[] = {
+ { .fw_name = "osc", .name = "osc" },
+};
+
+/*
+ * All PLL clocks are marked as CRITICAL, hence they are very crucial
+ * for the functioning of the SoC
+ */
+static struct bm1880_pll_hw_clock bm1880_pll_clks[] = {
+ CLK_PLL(BM1880_CLK_MPLL, "clk_mpll", bm1880_pll_parent,
+ BM1880_CLK_MPLL_CTL, CLK_IS_CRITICAL),
+ CLK_PLL(BM1880_CLK_SPLL, "clk_spll", bm1880_pll_parent,
+ BM1880_CLK_SPLL_CTL, CLK_IS_CRITICAL),
+ CLK_PLL(BM1880_CLK_FPLL, "clk_fpll", bm1880_pll_parent,
+ BM1880_CLK_FPLL_CTL, CLK_IS_CRITICAL),
+ CLK_PLL(BM1880_CLK_DDRPLL, "clk_ddrpll", bm1880_pll_parent,
+ BM1880_CLK_DDRPLL_CTL, CLK_IS_CRITICAL),
+};
+
+/*
+ * Clocks marked as CRITICAL are needed for the proper functioning
+ * of the SoC.
+ */
+static const struct bm1880_gate_clock bm1880_gate_clks[] = {
+ { BM1880_CLK_AHB_ROM, "clk_ahb_rom", "clk_mux_axi6",
+ BM1880_CLK_ENABLE0, 2, CLK_IS_CRITICAL },
+ { BM1880_CLK_AXI_SRAM, "clk_axi_sram", "clk_axi1",
+ BM1880_CLK_ENABLE0, 3, CLK_IS_CRITICAL },
+ { BM1880_CLK_DDR_AXI, "clk_ddr_axi", "clk_mux_axi6",
+ BM1880_CLK_ENABLE0, 4, CLK_IS_CRITICAL },
+ { BM1880_CLK_APB_EFUSE, "clk_apb_efuse", "clk_mux_axi6",
+ BM1880_CLK_ENABLE0, 6, CLK_IS_CRITICAL },
+ { BM1880_CLK_AXI5_EMMC, "clk_axi5_emmc", "clk_axi5",
+ BM1880_CLK_ENABLE0, 7, 0 },
+ { BM1880_CLK_AXI5_SD, "clk_axi5_sd", "clk_axi5",
+ BM1880_CLK_ENABLE0, 10, 0 },
+ { BM1880_CLK_AXI4_ETH0, "clk_axi4_eth0", "clk_axi4",
+ BM1880_CLK_ENABLE0, 14, 0 },
+ { BM1880_CLK_AXI4_ETH1, "clk_axi4_eth1", "clk_axi4",
+ BM1880_CLK_ENABLE0, 16, 0 },
+ { BM1880_CLK_AXI1_GDMA, "clk_axi1_gdma", "clk_axi1",
+ BM1880_CLK_ENABLE0, 17, 0 },
+ /* Don't gate GPIO clocks as it is not owned by the GPIO driver */
+ { BM1880_CLK_APB_GPIO, "clk_apb_gpio", "clk_mux_axi6",
+ BM1880_CLK_ENABLE0, 18, CLK_IGNORE_UNUSED },
+ { BM1880_CLK_APB_GPIO_INTR, "clk_apb_gpio_intr", "clk_mux_axi6",
+ BM1880_CLK_ENABLE0, 19, CLK_IGNORE_UNUSED },
+ { BM1880_CLK_AXI1_MINER, "clk_axi1_miner", "clk_axi1",
+ BM1880_CLK_ENABLE0, 21, 0 },
+ { BM1880_CLK_AHB_SF, "clk_ahb_sf", "clk_mux_axi6",
+ BM1880_CLK_ENABLE0, 22, 0 },
+ { BM1880_CLK_SDMA_AXI, "clk_sdma_axi", "clk_axi5",
+ BM1880_CLK_ENABLE0, 23, 0 },
+ { BM1880_CLK_APB_I2C, "clk_apb_i2c", "clk_mux_axi6",
+ BM1880_CLK_ENABLE0, 25, 0 },
+ { BM1880_CLK_APB_WDT, "clk_apb_wdt", "clk_mux_axi6",
+ BM1880_CLK_ENABLE0, 26, 0 },
+ { BM1880_CLK_APB_JPEG, "clk_apb_jpeg", "clk_axi6",
+ BM1880_CLK_ENABLE0, 27, 0 },
+ { BM1880_CLK_AXI5_NF, "clk_axi5_nf", "clk_axi5",
+ BM1880_CLK_ENABLE0, 29, 0 },
+ { BM1880_CLK_APB_NF, "clk_apb_nf", "clk_axi6",
+ BM1880_CLK_ENABLE0, 30, 0 },
+ { BM1880_CLK_APB_PWM, "clk_apb_pwm", "clk_mux_axi6",
+ BM1880_CLK_ENABLE1, 0, 0 },
+ { BM1880_CLK_RV, "clk_rv", "clk_mux_rv",
+ BM1880_CLK_ENABLE1, 1, 0 },
+ { BM1880_CLK_APB_SPI, "clk_apb_spi", "clk_mux_axi6",
+ BM1880_CLK_ENABLE1, 2, 0 },
+ { BM1880_CLK_UART_500M, "clk_uart_500m", "clk_div_uart_500m",
+ BM1880_CLK_ENABLE1, 4, 0 },
+ { BM1880_CLK_APB_UART, "clk_apb_uart", "clk_axi6",
+ BM1880_CLK_ENABLE1, 5, 0 },
+ { BM1880_CLK_APB_I2S, "clk_apb_i2s", "clk_axi6",
+ BM1880_CLK_ENABLE1, 6, 0 },
+ { BM1880_CLK_AXI4_USB, "clk_axi4_usb", "clk_axi4",
+ BM1880_CLK_ENABLE1, 7, 0 },
+ { BM1880_CLK_APB_USB, "clk_apb_usb", "clk_axi6",
+ BM1880_CLK_ENABLE1, 8, 0 },
+ { BM1880_CLK_12M_USB, "clk_12m_usb", "clk_div_12m_usb",
+ BM1880_CLK_ENABLE1, 11, 0 },
+ { BM1880_CLK_APB_VIDEO, "clk_apb_video", "clk_axi6",
+ BM1880_CLK_ENABLE1, 12, 0 },
+ { BM1880_CLK_APB_VPP, "clk_apb_vpp", "clk_axi6",
+ BM1880_CLK_ENABLE1, 15, 0 },
+ { BM1880_CLK_AXI6, "clk_axi6", "clk_mux_axi6",
+ BM1880_CLK_ENABLE1, 21, CLK_IS_CRITICAL },
+};
+
+static const char * const clk_a53_parents[] = { "clk_spll", "clk_mpll" };
+static const char * const clk_rv_parents[] = { "clk_div_1_rv", "clk_div_0_rv" };
+static const char * const clk_axi1_parents[] = { "clk_div_1_axi1", "clk_div_0_axi1" };
+static const char * const clk_axi6_parents[] = { "clk_div_1_axi6", "clk_div_0_axi6" };
+
+static const struct bm1880_mux_clock bm1880_mux_clks[] = {
+ { BM1880_CLK_MUX_RV, "clk_mux_rv", clk_rv_parents, 2,
+ BM1880_CLK_SELECT, 1, 0 },
+ { BM1880_CLK_MUX_AXI6, "clk_mux_axi6", clk_axi6_parents, 2,
+ BM1880_CLK_SELECT, 3, 0 },
+};
+
+static const struct clk_div_table bm1880_div_table_0[] = {
+ { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
+ { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
+ { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
+ { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
+ { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
+ { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
+ { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
+ { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
+ { 0, 0 }
+};
+
+static const struct clk_div_table bm1880_div_table_1[] = {
+ { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
+ { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
+ { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
+ { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
+ { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
+ { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
+ { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
+ { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
+ { 127, 128 }, { 0, 0 }
+};
+
+static const struct clk_div_table bm1880_div_table_2[] = {
+ { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
+ { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
+ { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
+ { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
+ { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
+ { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
+ { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
+ { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
+ { 127, 128 }, { 255, 256 }, { 0, 0 }
+};
+
+static const struct clk_div_table bm1880_div_table_3[] = {
+ { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
+ { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
+ { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
+ { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
+ { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
+ { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
+ { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
+ { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
+ { 127, 128 }, { 255, 256 }, { 511, 512 }, { 0, 0 }
+};
+
+static const struct clk_div_table bm1880_div_table_4[] = {
+ { 0, 1 }, { 1, 2 }, { 2, 3 }, { 3, 4 },
+ { 4, 5 }, { 5, 6 }, { 6, 7 }, { 7, 8 },
+ { 8, 9 }, { 9, 10 }, { 10, 11 }, { 11, 12 },
+ { 12, 13 }, { 13, 14 }, { 14, 15 }, { 15, 16 },
+ { 16, 17 }, { 17, 18 }, { 18, 19 }, { 19, 20 },
+ { 20, 21 }, { 21, 22 }, { 22, 23 }, { 23, 24 },
+ { 24, 25 }, { 25, 26 }, { 26, 27 }, { 27, 28 },
+ { 28, 29 }, { 29, 30 }, { 30, 31 }, { 31, 32 },
+ { 127, 128 }, { 255, 256 }, { 511, 512 }, { 65535, 65536 },
+ { 0, 0 }
+};
+
+/*
+ * Clocks marked as CRITICAL are needed for the proper functioning
+ * of the SoC.
+ */
+static struct bm1880_div_hw_clock bm1880_div_clks[] = {
+ CLK_DIV(BM1880_CLK_DIV_0_RV, "clk_div_0_rv", &bm1880_pll_clks[1].hw,
+ BM1880_CLK_DIV12, 16, 5, 1, bm1880_div_table_0, 0),
+ CLK_DIV(BM1880_CLK_DIV_1_RV, "clk_div_1_rv", &bm1880_pll_clks[2].hw,
+ BM1880_CLK_DIV13, 16, 5, 1, bm1880_div_table_0, 0),
+ CLK_DIV(BM1880_CLK_DIV_UART_500M, "clk_div_uart_500m", &bm1880_pll_clks[2].hw,
+ BM1880_CLK_DIV15, 16, 7, 3, bm1880_div_table_1, 0),
+ CLK_DIV(BM1880_CLK_DIV_0_AXI1, "clk_div_0_axi1", &bm1880_pll_clks[0].hw,
+ BM1880_CLK_DIV21, 16, 5, 2, bm1880_div_table_0,
+ CLK_IS_CRITICAL),
+ CLK_DIV(BM1880_CLK_DIV_1_AXI1, "clk_div_1_axi1", &bm1880_pll_clks[2].hw,
+ BM1880_CLK_DIV22, 16, 5, 3, bm1880_div_table_0,
+ CLK_IS_CRITICAL),
+ CLK_DIV(BM1880_CLK_DIV_0_AXI6, "clk_div_0_axi6", &bm1880_pll_clks[2].hw,
+ BM1880_CLK_DIV27, 16, 5, 15, bm1880_div_table_0,
+ CLK_IS_CRITICAL),
+ CLK_DIV(BM1880_CLK_DIV_1_AXI6, "clk_div_1_axi6", &bm1880_pll_clks[0].hw,
+ BM1880_CLK_DIV28, 16, 5, 11, bm1880_div_table_0,
+ CLK_IS_CRITICAL),
+ CLK_DIV(BM1880_CLK_DIV_12M_USB, "clk_div_12m_usb", &bm1880_pll_clks[2].hw,
+ BM1880_CLK_DIV18, 16, 7, 125, bm1880_div_table_1, 0),
+};
+
+/*
+ * Clocks marked as CRITICAL are all needed for the proper functioning
+ * of the SoC.
+ */
+static struct bm1880_composite_clock bm1880_composite_clks[] = {
+ GATE_MUX(BM1880_CLK_A53, "clk_a53", clk_a53_parents,
+ BM1880_CLK_ENABLE0, 0, BM1880_CLK_SELECT, 0,
+ CLK_IS_CRITICAL),
+ GATE_DIV(BM1880_CLK_50M_A53, "clk_50m_a53", "clk_fpll",
+ BM1880_CLK_ENABLE0, 1, BM1880_CLK_DIV0, 16, 5, 30,
+ bm1880_div_table_0, CLK_IS_CRITICAL),
+ GATE_DIV(BM1880_CLK_EFUSE, "clk_efuse", "clk_fpll",
+ BM1880_CLK_ENABLE0, 5, BM1880_CLK_DIV1, 16, 7, 60,
+ bm1880_div_table_1, 0),
+ GATE_DIV(BM1880_CLK_EMMC, "clk_emmc", "clk_fpll",
+ BM1880_CLK_ENABLE0, 8, BM1880_CLK_DIV2, 16, 5, 15,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_100K_EMMC, "clk_100k_emmc", "clk_div_12m_usb",
+ BM1880_CLK_ENABLE0, 9, BM1880_CLK_DIV3, 16, 8, 120,
+ bm1880_div_table_2, 0),
+ GATE_DIV(BM1880_CLK_SD, "clk_sd", "clk_fpll",
+ BM1880_CLK_ENABLE0, 11, BM1880_CLK_DIV4, 16, 5, 15,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_100K_SD, "clk_100k_sd", "clk_div_12m_usb",
+ BM1880_CLK_ENABLE0, 12, BM1880_CLK_DIV5, 16, 8, 120,
+ bm1880_div_table_2, 0),
+ GATE_DIV(BM1880_CLK_500M_ETH0, "clk_500m_eth0", "clk_fpll",
+ BM1880_CLK_ENABLE0, 13, BM1880_CLK_DIV6, 16, 5, 3,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_500M_ETH1, "clk_500m_eth1", "clk_fpll",
+ BM1880_CLK_ENABLE0, 15, BM1880_CLK_DIV7, 16, 5, 3,
+ bm1880_div_table_0, 0),
+ /* Don't gate GPIO clocks as it is not owned by the GPIO driver */
+ GATE_DIV(BM1880_CLK_GPIO_DB, "clk_gpio_db", "clk_div_12m_usb",
+ BM1880_CLK_ENABLE0, 20, BM1880_CLK_DIV8, 16, 16, 120,
+ bm1880_div_table_4, CLK_IGNORE_UNUSED),
+ GATE_DIV(BM1880_CLK_SDMA_AUD, "clk_sdma_aud", "clk_fpll",
+ BM1880_CLK_ENABLE0, 24, BM1880_CLK_DIV9, 16, 7, 61,
+ bm1880_div_table_1, 0),
+ GATE_DIV(BM1880_CLK_JPEG_AXI, "clk_jpeg_axi", "clk_fpll",
+ BM1880_CLK_ENABLE0, 28, BM1880_CLK_DIV10, 16, 5, 4,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_NF, "clk_nf", "clk_fpll",
+ BM1880_CLK_ENABLE0, 31, BM1880_CLK_DIV11, 16, 5, 30,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_TPU_AXI, "clk_tpu_axi", "clk_spll",
+ BM1880_CLK_ENABLE1, 3, BM1880_CLK_DIV14, 16, 5, 1,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_125M_USB, "clk_125m_usb", "clk_fpll",
+ BM1880_CLK_ENABLE1, 9, BM1880_CLK_DIV16, 16, 5, 12,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_33K_USB, "clk_33k_usb", "clk_div_12m_usb",
+ BM1880_CLK_ENABLE1, 10, BM1880_CLK_DIV17, 16, 9, 363,
+ bm1880_div_table_3, 0),
+ GATE_DIV(BM1880_CLK_VIDEO_AXI, "clk_video_axi", "clk_fpll",
+ BM1880_CLK_ENABLE1, 13, BM1880_CLK_DIV19, 16, 5, 4,
+ bm1880_div_table_0, 0),
+ GATE_DIV(BM1880_CLK_VPP_AXI, "clk_vpp_axi", "clk_fpll",
+ BM1880_CLK_ENABLE1, 14, BM1880_CLK_DIV20, 16, 5, 4,
+ bm1880_div_table_0, 0),
+ GATE_MUX(BM1880_CLK_AXI1, "clk_axi1", clk_axi1_parents,
+ BM1880_CLK_ENABLE1, 15, BM1880_CLK_SELECT, 2,
+ CLK_IS_CRITICAL),
+ GATE_DIV(BM1880_CLK_AXI2, "clk_axi2", "clk_fpll",
+ BM1880_CLK_ENABLE1, 17, BM1880_CLK_DIV23, 16, 5, 3,
+ bm1880_div_table_0, CLK_IS_CRITICAL),
+ GATE_DIV(BM1880_CLK_AXI3, "clk_axi3", "clk_mux_rv",
+ BM1880_CLK_ENABLE1, 18, BM1880_CLK_DIV24, 16, 5, 2,
+ bm1880_div_table_0, CLK_IS_CRITICAL),
+ GATE_DIV(BM1880_CLK_AXI4, "clk_axi4", "clk_fpll",
+ BM1880_CLK_ENABLE1, 19, BM1880_CLK_DIV25, 16, 5, 6,
+ bm1880_div_table_0, CLK_IS_CRITICAL),
+ GATE_DIV(BM1880_CLK_AXI5, "clk_axi5", "clk_fpll",
+ BM1880_CLK_ENABLE1, 20, BM1880_CLK_DIV26, 16, 5, 15,
+ bm1880_div_table_0, CLK_IS_CRITICAL),
+};
+
+static unsigned long bm1880_pll_rate_calc(u32 regval, unsigned long parent_rate)
+{
+ u32 fbdiv, fref, refdiv;
+ u32 postdiv1, postdiv2;
+ unsigned long rate, numerator, denominator;
+
+ fbdiv = (regval >> 16) & 0xfff;
+ fref = parent_rate;
+ refdiv = regval & 0x1f;
+ postdiv1 = (regval >> 8) & 0x7;
+ postdiv2 = (regval >> 12) & 0x7;
+
+ numerator = parent_rate * fbdiv;
+ denominator = refdiv * postdiv1 * postdiv2;
+ do_div(numerator, denominator);
+ rate = numerator;
+
+ return rate;
+}
+
+static unsigned long bm1880_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct bm1880_pll_hw_clock *pll_hw = to_bm1880_pll_clk(hw);
+ unsigned long rate;
+ u32 regval;
+
+ regval = readl(pll_hw->base + pll_hw->pll.reg);
+ rate = bm1880_pll_rate_calc(regval, parent_rate);
+
+ return rate;
+}
+
+static const struct clk_ops bm1880_pll_ops = {
+ .recalc_rate = bm1880_pll_recalc_rate,
+};
+
+static struct clk_hw *bm1880_clk_register_pll(struct bm1880_pll_hw_clock *pll_clk,
+ void __iomem *sys_base)
+{
+ struct clk_hw *hw;
+ int err;
+
+ pll_clk->base = sys_base;
+ hw = &pll_clk->hw;
+
+ err = clk_hw_register(NULL, hw);
+ if (err)
+ return ERR_PTR(err);
+
+ return hw;
+}
+
+static void bm1880_clk_unregister_pll(struct clk_hw *hw)
+{
+ struct bm1880_pll_hw_clock *pll_hw = to_bm1880_pll_clk(hw);
+
+ clk_hw_unregister(hw);
+ kfree(pll_hw);
+}
+
+static int bm1880_clk_register_plls(struct bm1880_pll_hw_clock *clks,
+ int num_clks, struct bm1880_clock_data *data)
+{
+ struct clk_hw *hw;
+ void __iomem *pll_base = data->pll_base;
+ int i;
+
+ for (i = 0; i < num_clks; i++) {
+ struct bm1880_pll_hw_clock *bm1880_clk = &clks[i];
+
+ hw = bm1880_clk_register_pll(bm1880_clk, pll_base);
+ if (IS_ERR(hw)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, bm1880_clk->pll.name);
+ goto err_clk;
+ }
+
+ data->clk_data->hws[clks[i].pll.id] = hw;
+ }
+
+ return 0;
+
+err_clk:
+ while (i--)
+ bm1880_clk_unregister_pll(data->clk_data->hws[clks[i].pll.id]);
+
+ return PTR_ERR(hw);
+}
+
+static int bm1880_clk_register_mux(const struct bm1880_mux_clock *clks,
+ int num_clks, struct bm1880_clock_data *data)
+{
+ struct clk_hw *hw;
+ void __iomem *sys_base = data->sys_base;
+ int i;
+
+ for (i = 0; i < num_clks; i++) {
+ hw = clk_hw_register_mux(NULL, clks[i].name,
+ clks[i].parents,
+ clks[i].num_parents,
+ clks[i].flags,
+ sys_base + clks[i].reg,
+ clks[i].shift, 1, 0,
+ &bm1880_clk_lock);
+ if (IS_ERR(hw)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, clks[i].name);
+ goto err_clk;
+ }
+
+ data->clk_data->hws[clks[i].id] = hw;
+ }
+
+ return 0;
+
+err_clk:
+ while (i--)
+ clk_hw_unregister_mux(data->clk_data->hws[clks[i].id]);
+
+ return PTR_ERR(hw);
+}
+
+static unsigned long bm1880_clk_div_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw);
+ struct bm1880_div_clock *div = &div_hw->div;
+ void __iomem *reg_addr = div_hw->base + div->reg;
+ unsigned int val;
+ unsigned long rate;
+
+ if (!(readl(reg_addr) & BIT(3))) {
+ val = div->initval;
+ } else {
+ val = readl(reg_addr) >> div->shift;
+ val &= clk_div_mask(div->width);
+ }
+
+ rate = divider_recalc_rate(hw, parent_rate, val, div->table,
+ div->flags, div->width);
+
+ return rate;
+}
+
+static long bm1880_clk_div_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw);
+ struct bm1880_div_clock *div = &div_hw->div;
+ void __iomem *reg_addr = div_hw->base + div->reg;
+
+ if (div->flags & CLK_DIVIDER_READ_ONLY) {
+ u32 val;
+
+ val = readl(reg_addr) >> div->shift;
+ val &= clk_div_mask(div->width);
+
+ return divider_ro_round_rate(hw, rate, prate, div->table,
+ div->width, div->flags,
+ val);
+ }
+
+ return divider_round_rate(hw, rate, prate, div->table,
+ div->width, div->flags);
+}
+
+static int bm1880_clk_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw);
+ struct bm1880_div_clock *div = &div_hw->div;
+ void __iomem *reg_addr = div_hw->base + div->reg;
+ unsigned long flags = 0;
+ int value;
+ u32 val;
+
+ value = divider_get_val(rate, parent_rate, div->table,
+ div->width, div_hw->div.flags);
+ if (value < 0)
+ return value;
+
+ if (div_hw->lock)
+ spin_lock_irqsave(div_hw->lock, flags);
+ else
+ __acquire(div_hw->lock);
+
+ if (div->flags & CLK_DIVIDER_HIWORD_MASK) {
+ val = clk_div_mask(div->width) << (div_hw->div.shift + 16);
+ } else {
+ val = readl(reg_addr);
+ val &= ~(clk_div_mask(div->width) << div_hw->div.shift);
+ }
+ val |= (u32)value << div->shift;
+ writel(val, reg_addr);
+
+ if (div_hw->lock)
+ spin_unlock_irqrestore(div_hw->lock, flags);
+ else
+ __release(div_hw->lock);
+
+ return 0;
+}
+
+static const struct clk_ops bm1880_clk_div_ops = {
+ .recalc_rate = bm1880_clk_div_recalc_rate,
+ .round_rate = bm1880_clk_div_round_rate,
+ .set_rate = bm1880_clk_div_set_rate,
+};
+
+static struct clk_hw *bm1880_clk_register_div(struct bm1880_div_hw_clock *div_clk,
+ void __iomem *sys_base)
+{
+ struct clk_hw *hw;
+ int err;
+
+ div_clk->div.flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO;
+ div_clk->base = sys_base;
+ div_clk->lock = &bm1880_clk_lock;
+
+ hw = &div_clk->hw;
+ err = clk_hw_register(NULL, hw);
+ if (err)
+ return ERR_PTR(err);
+
+ return hw;
+}
+
+static void bm1880_clk_unregister_div(struct clk_hw *hw)
+{
+ struct bm1880_div_hw_clock *div_hw = to_bm1880_div_clk(hw);
+
+ clk_hw_unregister(hw);
+ kfree(div_hw);
+}
+
+static int bm1880_clk_register_divs(struct bm1880_div_hw_clock *clks,
+ int num_clks, struct bm1880_clock_data *data)
+{
+ struct clk_hw *hw;
+ void __iomem *sys_base = data->sys_base;
+ int i;
+
+ for (i = 0; i < num_clks; i++) {
+ struct bm1880_div_hw_clock *bm1880_clk = &clks[i];
+
+ hw = bm1880_clk_register_div(bm1880_clk, sys_base);
+ if (IS_ERR(hw)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, bm1880_clk->div.name);
+ goto err_clk;
+ }
+
+ data->clk_data->hws[clks[i].div.id] = hw;
+ }
+
+ return 0;
+
+err_clk:
+ while (i--)
+ bm1880_clk_unregister_div(data->clk_data->hws[clks[i].div.id]);
+
+ return PTR_ERR(hw);
+}
+
+static int bm1880_clk_register_gate(const struct bm1880_gate_clock *clks,
+ int num_clks, struct bm1880_clock_data *data)
+{
+ struct clk_hw *hw;
+ void __iomem *sys_base = data->sys_base;
+ int i;
+
+ for (i = 0; i < num_clks; i++) {
+ hw = clk_hw_register_gate(NULL, clks[i].name,
+ clks[i].parent,
+ clks[i].flags,
+ sys_base + clks[i].gate_reg,
+ clks[i].gate_shift,
+ 0,
+ &bm1880_clk_lock);
+ if (IS_ERR(hw)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, clks[i].name);
+ goto err_clk;
+ }
+
+ data->clk_data->hws[clks[i].id] = hw;
+ }
+
+ return 0;
+
+err_clk:
+ while (i--)
+ clk_hw_unregister_gate(data->clk_data->hws[clks[i].id]);
+
+ return PTR_ERR(hw);
+}
+
+static struct clk_hw *bm1880_clk_register_composite(struct bm1880_composite_clock *clks,
+ void __iomem *sys_base)
+{
+ struct clk_hw *hw;
+ struct clk_mux *mux = NULL;
+ struct clk_gate *gate = NULL;
+ struct bm1880_div_hw_clock *div_hws = NULL;
+ struct clk_hw *mux_hw = NULL, *gate_hw = NULL, *div_hw = NULL;
+ const struct clk_ops *mux_ops = NULL, *gate_ops = NULL, *div_ops = NULL;
+ const char * const *parent_names;
+ const char *parent;
+ int num_parents;
+ int ret;
+
+ if (clks->mux_shift >= 0) {
+ mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return ERR_PTR(-ENOMEM);
+
+ mux->reg = sys_base + clks->mux_reg;
+ mux->mask = 1;
+ mux->shift = clks->mux_shift;
+ mux_hw = &mux->hw;
+ mux_ops = &clk_mux_ops;
+ mux->lock = &bm1880_clk_lock;
+
+ parent_names = clks->parents;
+ num_parents = clks->num_parents;
+ } else {
+ parent = clks->parent;
+ parent_names = &parent;
+ num_parents = 1;
+ }
+
+ if (clks->gate_shift >= 0) {
+ gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+ if (!gate) {
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ gate->reg = sys_base + clks->gate_reg;
+ gate->bit_idx = clks->gate_shift;
+ gate->lock = &bm1880_clk_lock;
+
+ gate_hw = &gate->hw;
+ gate_ops = &clk_gate_ops;
+ }
+
+ if (clks->div_shift >= 0) {
+ div_hws = kzalloc(sizeof(*div_hws), GFP_KERNEL);
+ if (!div_hws) {
+ ret = -ENOMEM;
+ goto err_out;
+ }
+
+ div_hws->base = sys_base;
+ div_hws->div.reg = clks->div_reg;
+ div_hws->div.shift = clks->div_shift;
+ div_hws->div.width = clks->div_width;
+ div_hws->div.table = clks->table;
+ div_hws->div.initval = clks->div_initval;
+ div_hws->lock = &bm1880_clk_lock;
+ div_hws->div.flags = CLK_DIVIDER_ONE_BASED |
+ CLK_DIVIDER_ALLOW_ZERO;
+
+ div_hw = &div_hws->hw;
+ div_ops = &bm1880_clk_div_ops;
+ }
+
+ hw = clk_hw_register_composite(NULL, clks->name, parent_names,
+ num_parents, mux_hw, mux_ops, div_hw,
+ div_ops, gate_hw, gate_ops,
+ clks->flags);
+
+ if (IS_ERR(hw)) {
+ ret = PTR_ERR(hw);
+ goto err_out;
+ }
+
+ return hw;
+
+err_out:
+ kfree(div_hws);
+ kfree(gate);
+ kfree(mux);
+
+ return ERR_PTR(ret);
+}
+
+static int bm1880_clk_register_composites(struct bm1880_composite_clock *clks,
+ int num_clks, struct bm1880_clock_data *data)
+{
+ struct clk_hw *hw;
+ void __iomem *sys_base = data->sys_base;
+ int i;
+
+ for (i = 0; i < num_clks; i++) {
+ struct bm1880_composite_clock *bm1880_clk = &clks[i];
+
+ hw = bm1880_clk_register_composite(bm1880_clk, sys_base);
+ if (IS_ERR(hw)) {
+ pr_err("%s: failed to register clock %s\n",
+ __func__, bm1880_clk->name);
+ goto err_clk;
+ }
+
+ data->clk_data->hws[clks[i].id] = hw;
+ }
+
+ return 0;
+
+err_clk:
+ while (i--)
+ clk_hw_unregister_composite(data->clk_data->hws[clks[i].id]);
+
+ return PTR_ERR(hw);
+}
+
+static int bm1880_clk_probe(struct platform_device *pdev)
+{
+ struct bm1880_clock_data *clk_data;
+ void __iomem *pll_base, *sys_base;
+ struct device_node *np = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct clk_hw_onecell_data *clk_hw_data;
+ int num_clks, i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pll_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pll_base))
+ return PTR_ERR(pll_base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ sys_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(sys_base))
+ return PTR_ERR(sys_base);
+
+ clk_data = devm_kzalloc(dev, sizeof(*clk_data), GFP_KERNEL);
+ if (!clk_data)
+ return -ENOMEM;
+
+ clk_data->pll_base = pll_base;
+ clk_data->sys_base = sys_base;
+
+ num_clks = ARRAY_SIZE(bm1880_pll_clks) +
+ ARRAY_SIZE(bm1880_div_clks) +
+ ARRAY_SIZE(bm1880_mux_clks) +
+ ARRAY_SIZE(bm1880_composite_clks) +
+ ARRAY_SIZE(bm1880_gate_clks);
+
+ clk_hw_data = devm_kzalloc(&pdev->dev, struct_size(clk_hw_data, hws,
+ num_clks), GFP_KERNEL);
+ if (!clk_hw_data)
+ return -ENOMEM;
+
+ clk_data->clk_data = clk_hw_data;
+
+ for (i = 0; i < num_clks; i++)
+ clk_data->clk_data->hws[i] = ERR_PTR(-ENOENT);
+
+ clk_data->clk_data->num = num_clks;
+
+ bm1880_clk_register_plls(bm1880_pll_clks,
+ ARRAY_SIZE(bm1880_pll_clks),
+ clk_data);
+
+ bm1880_clk_register_divs(bm1880_div_clks,
+ ARRAY_SIZE(bm1880_div_clks),
+ clk_data);
+
+ bm1880_clk_register_mux(bm1880_mux_clks,
+ ARRAY_SIZE(bm1880_mux_clks),
+ clk_data);
+
+ bm1880_clk_register_composites(bm1880_composite_clks,
+ ARRAY_SIZE(bm1880_composite_clks),
+ clk_data);
+
+ bm1880_clk_register_gate(bm1880_gate_clks,
+ ARRAY_SIZE(bm1880_gate_clks),
+ clk_data);
+
+ return of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
+ clk_data->clk_data);
+}
+
+static const struct of_device_id bm1880_of_match[] = {
+ { .compatible = "bitmain,bm1880-clk", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, bm1880_of_match);
+
+static struct platform_driver bm1880_clk_driver = {
+ .driver = {
+ .name = "bm1880-clk",
+ .of_match_table = bm1880_of_match,
+ },
+ .probe = bm1880_clk_probe,
+};
+module_platform_driver(bm1880_clk_driver);
+
+MODULE_AUTHOR("Manivannan Sadhasivam <[email protected]>");
+MODULE_DESCRIPTION("Clock driver for Bitmain BM1880 SoC");
+MODULE_LICENSE("GPL v2");
--
2.17.1
Add MAINTAINERS entry for Bitmain BM1880 SoC clock driver.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
MAINTAINERS | 2 ++
1 file changed, 2 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 997a4f8fe88e..280defec35b2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1503,8 +1503,10 @@ M: Manivannan Sadhasivam <[email protected]>
L: [email protected] (moderated for non-subscribers)
S: Maintained
F: arch/arm64/boot/dts/bitmain/
+F: drivers/clk/clk-bm1880.c
F: drivers/pinctrl/pinctrl-bm1880.c
F: Documentation/devicetree/bindings/arm/bitmain.yaml
+F: Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
F: Documentation/devicetree/bindings/pinctrl/bitmain,bm1880-pinctrl.txt
ARM/CALXEDA HIGHBANK ARCHITECTURE
--
2.17.1
On Mon, Aug 19, 2019 at 8:02 AM Manivannan Sadhasivam
<[email protected]> wrote:
>
> Add YAML devicetree binding for Bitmain BM1880 SoC.
>
> Signed-off-by: Manivannan Sadhasivam <[email protected]>
> ---
> .../bindings/clock/bitmain,bm1880-clk.yaml | 83 +++++++++++++++++++
> include/dt-bindings/clock/bm1880-clock.h | 82 ++++++++++++++++++
> 2 files changed, 165 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
> create mode 100644 include/dt-bindings/clock/bm1880-clock.h
>
> diff --git a/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
> new file mode 100644
> index 000000000000..a457f996287d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/bitmain,bm1880-clk.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/bindings/clock/bitmain,bm1880-clk.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bitmain BM1880 Clock Controller
> +
> +maintainers:
> + - Manivannan Sadhasivam <[email protected]>
> +
> +description: |
> + The Bitmain BM1880 clock controller generates and supplies clock to
> + various peripherals within the SoC.
> +
> + This binding uses common clock bindings
> + [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - enum:
> + - bitmain,bm1880-clk
Just 'const: bitmain,bm1880-clk' is enough.
> +
> + reg:
> + minItems: 2
> + maxItems: 2
These 2 are implied by the items list and can be dropped.
> + items:
> + - description: pll registers
> + - description: system registers
> +
> + reg-names:
> + items:
> + - const: pll
> + - const: sys
> +
> + clocks:
> + maxItems: 1
> + description: Phandle of the input reference clock
Don't need a description if there's only one entry.
> +
> + clock-names:
> + maxItems: 1
> + items:
> + - const: osc
Just:
clock-names:
const: osc
> +
> + '#clock-cells':
> + const: 1
> +
> +required:
> + - compatible
> + - reg
> + - reg-names
> + - clocks
> + - clock-names
> + - '#clock-cells'
> +
> +examples:
> + # Clock controller node:
> + - |
> + clk: clock-controller@e8 {
> + compatible = "bitmain,bm1880-clk";
> + reg = <0xe8 0x0c>, <0x800 0xb0>;
> + reg-names = "pll", "sys";
> + clocks = <&osc>;
> + clock-names = "osc";
> + #clock-cells = <1>;
> + };
> +
> + # Example UART controller node that consumes clock generated by the clock controller:
> + - |
> + uart0: serial@58018000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x58018000 0x0 0x2000>;
> + clocks = <&clk BM1880_CLK_UART_500M>;
> + <&clk BM1880_CLK_APB_UART>;
This won't build without includes. Please run 'make dt_binding_check'
before you submit bindings.
> + clock-names = "baudclk", "apb_pclk";
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + };
> +
> +...
> diff --git a/include/dt-bindings/clock/bm1880-clock.h b/include/dt-bindings/clock/bm1880-clock.h
> new file mode 100644
> index 000000000000..895646d66b07
> --- /dev/null
> +++ b/include/dt-bindings/clock/bm1880-clock.h
> @@ -0,0 +1,82 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Device Tree binding constants for Bitmain BM1880 SoC
> + *
> + * Copyright (c) 2019 Linaro Ltd.
> + */
> +
> +#ifndef __DT_BINDINGS_CLOCK_BM1880_H
> +#define __DT_BINDINGS_CLOCK_BM1880_H
> +
> +#define BM1880_CLK_OSC 0
> +#define BM1880_CLK_MPLL 1
> +#define BM1880_CLK_SPLL 2
> +#define BM1880_CLK_FPLL 3
> +#define BM1880_CLK_DDRPLL 4
> +#define BM1880_CLK_A53 5
> +#define BM1880_CLK_50M_A53 6
> +#define BM1880_CLK_AHB_ROM 7
> +#define BM1880_CLK_AXI_SRAM 8
> +#define BM1880_CLK_DDR_AXI 9
> +#define BM1880_CLK_EFUSE 10
> +#define BM1880_CLK_APB_EFUSE 11
> +#define BM1880_CLK_AXI5_EMMC 12
> +#define BM1880_CLK_EMMC 13
> +#define BM1880_CLK_100K_EMMC 14
> +#define BM1880_CLK_AXI5_SD 15
> +#define BM1880_CLK_SD 16
> +#define BM1880_CLK_100K_SD 17
> +#define BM1880_CLK_500M_ETH0 18
> +#define BM1880_CLK_AXI4_ETH0 19
> +#define BM1880_CLK_500M_ETH1 20
> +#define BM1880_CLK_AXI4_ETH1 21
> +#define BM1880_CLK_AXI1_GDMA 22
> +#define BM1880_CLK_APB_GPIO 23
> +#define BM1880_CLK_APB_GPIO_INTR 24
> +#define BM1880_CLK_GPIO_DB 25
> +#define BM1880_CLK_AXI1_MINER 26
> +#define BM1880_CLK_AHB_SF 27
> +#define BM1880_CLK_SDMA_AXI 28
> +#define BM1880_CLK_SDMA_AUD 29
> +#define BM1880_CLK_APB_I2C 30
> +#define BM1880_CLK_APB_WDT 31
> +#define BM1880_CLK_APB_JPEG 32
> +#define BM1880_CLK_JPEG_AXI 33
> +#define BM1880_CLK_AXI5_NF 34
> +#define BM1880_CLK_APB_NF 35
> +#define BM1880_CLK_NF 36
> +#define BM1880_CLK_APB_PWM 37
> +#define BM1880_CLK_DIV_0_RV 38
> +#define BM1880_CLK_DIV_1_RV 39
> +#define BM1880_CLK_MUX_RV 40
> +#define BM1880_CLK_RV 41
> +#define BM1880_CLK_APB_SPI 42
> +#define BM1880_CLK_TPU_AXI 43
> +#define BM1880_CLK_DIV_UART_500M 44
> +#define BM1880_CLK_UART_500M 45
> +#define BM1880_CLK_APB_UART 46
> +#define BM1880_CLK_APB_I2S 47
> +#define BM1880_CLK_AXI4_USB 48
> +#define BM1880_CLK_APB_USB 49
> +#define BM1880_CLK_125M_USB 50
> +#define BM1880_CLK_33K_USB 51
> +#define BM1880_CLK_DIV_12M_USB 52
> +#define BM1880_CLK_12M_USB 53
> +#define BM1880_CLK_APB_VIDEO 54
> +#define BM1880_CLK_VIDEO_AXI 55
> +#define BM1880_CLK_VPP_AXI 56
> +#define BM1880_CLK_APB_VPP 57
> +#define BM1880_CLK_DIV_0_AXI1 58
> +#define BM1880_CLK_DIV_1_AXI1 59
> +#define BM1880_CLK_AXI1 60
> +#define BM1880_CLK_AXI2 61
> +#define BM1880_CLK_AXI3 62
> +#define BM1880_CLK_AXI4 63
> +#define BM1880_CLK_AXI5 64
> +#define BM1880_CLK_DIV_0_AXI6 65
> +#define BM1880_CLK_DIV_1_AXI6 66
> +#define BM1880_CLK_MUX_AXI6 67
> +#define BM1880_CLK_AXI6 68
> +#define BM1880_NR_CLKS 69
> +
> +#endif /* __DT_BINDINGS_CLOCK_BM1880_H */
> --
> 2.17.1
>