Addressed some spacing, brace placement, and macro alignment in this
driver. I do not have the relevant hardware, but I verified that the
drivers/staging/rtl8192u module built between each patch. This time I've
included proper patch descriptions, my apologies for the previous series.
Stephen Brennan (3):
staging: rtl8192u: fix OPEN_BRACE errors in ieee80211
staging: rtl8192u: fix macro alignment in ieee80211
staging: rtl8192u: fix spacing in ieee80211
drivers/staging/rtl8192u/ieee80211/dot11d.c | 10 +-
.../staging/rtl8192u/ieee80211/ieee80211.h | 38 +++---
.../rtl8192u/ieee80211/ieee80211_crypt.c | 2 +-
.../rtl8192u/ieee80211/ieee80211_crypt_tkip.c | 22 ++--
.../rtl8192u/ieee80211/ieee80211_crypt_wep.c | 4 +-
.../staging/rtl8192u/ieee80211/ieee80211_rx.c | 118 ++++++-----------
.../rtl8192u/ieee80211/ieee80211_softmac_wx.c | 14 +-
.../staging/rtl8192u/ieee80211/ieee80211_tx.c | 121 ++++++++----------
.../staging/rtl8192u/ieee80211/ieee80211_wx.c | 35 +++--
.../rtl8192u/ieee80211/rtl819x_BAProc.c | 12 +-
.../staging/rtl8192u/ieee80211/rtl819x_HT.h | 17 ++-
.../rtl8192u/ieee80211/rtl819x_TSProc.c | 14 +-
12 files changed, 174 insertions(+), 233 deletions(-)
--
2.22.0
Checkpatch emits several errors regarding braces being on the incorrect
line. These can be fixed by moving the brace, do this. In a few cases,
some comments were moved to facilitate this.
Signed-off-by: Stephen Brennan <[email protected]>
---
.../staging/rtl8192u/ieee80211/ieee80211.h | 3 +-
.../staging/rtl8192u/ieee80211/ieee80211_rx.c | 116 ++++++------------
.../staging/rtl8192u/ieee80211/ieee80211_tx.c | 81 +++++-------
.../staging/rtl8192u/ieee80211/ieee80211_wx.c | 3 +-
.../staging/rtl8192u/ieee80211/rtl819x_HT.h | 3 +-
5 files changed, 73 insertions(+), 133 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
index 3963a08b9eb2..129dcb5a0f2e 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
@@ -458,8 +458,7 @@ do { if (ieee80211_debug_level & (level)) \
int i; \
u8 *pdata = (u8 *) data; \
printk(KERN_DEBUG "ieee80211: %s()\n", __func__); \
- for (i = 0; i < (int)(datalen); i++) \
- { \
+ for (i = 0; i < (int)(datalen); i++) { \
printk("%2x ", pdata[i]); \
if ((i + 1) % 16 == 0) printk("\n"); \
} \
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 7ef1e89de269..9d8b2ff700fe 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -218,8 +218,8 @@ ieee80211_rx_frame_mgmt(struct ieee80211_device *ieee, struct sk_buff *skb,
rx_stats->len = skb->len;
ieee80211_rx_mgt(ieee, (struct rtl_80211_hdr_4addr *)skb->data, rx_stats);
/* if ((ieee->state == IEEE80211_LINKED) && (memcmp(hdr->addr3, ieee->current_network.bssid, ETH_ALEN))) */
- if ((memcmp(hdr->addr1, ieee->dev->dev_addr, ETH_ALEN)))/* use ADDR1 to perform address matching for Management frames */
- {
+ if ((memcmp(hdr->addr1, ieee->dev->dev_addr, ETH_ALEN))) {
+ /* use ADDR1 to perform address matching for Management frames */
dev_kfree_skb_any(skb);
return 0;
}
@@ -339,8 +339,7 @@ ieee80211_rx_frame_decrypt(struct ieee80211_device *ieee, struct sk_buff *skb,
if (!crypt || !crypt->ops->decrypt_mpdu)
return 0;
- if (ieee->hwsec_active)
- {
+ if (ieee->hwsec_active) {
struct cb_desc *tcb_desc = (struct cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
tcb_desc->bHwSec = 1;
}
@@ -386,8 +385,7 @@ ieee80211_rx_frame_decrypt_msdu(struct ieee80211_device *ieee, struct sk_buff *s
if (!crypt || !crypt->ops->decrypt_msdu)
return 0;
- if (ieee->hwsec_active)
- {
+ if (ieee->hwsec_active) {
struct cb_desc *tcb_desc = (struct cb_desc *)(skb->cb + MAX_DEV_ADDR_SIZE);
tcb_desc->bHwSec = 1;
}
@@ -507,8 +505,7 @@ static int is_duplicate_packet(struct ieee80211_device *ieee,
static bool AddReorderEntry(struct rx_ts_record *pTS, struct rx_reorder_entry *pReorderEntry)
{
struct list_head *pList = &pTS->rx_pending_pkt_list;
- while (pList->next != &pTS->rx_pending_pkt_list)
- {
+ while (pList->next != &pTS->rx_pending_pkt_list) {
if (SN_LESS(pReorderEntry->SeqNum, list_entry(pList->next, struct rx_reorder_entry, List)->SeqNum))
pList = pList->next;
else if (SN_EQUAL(pReorderEntry->SeqNum, list_entry(pList->next, struct rx_reorder_entry, List)->SeqNum))
@@ -530,8 +527,7 @@ void ieee80211_indicate_packets(struct ieee80211_device *ieee, struct ieee80211_
u16 ethertype;
// if(index > 1)
// IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): hahahahhhh, We indicate packet from reorder list, index is %u\n",__func__,index);
- for (j = 0; j < index; j++)
- {
+ for (j = 0; j < index; j++) {
//added by amy for reorder
struct ieee80211_rxb *prxb = prxbIndicateArray[j];
for (i = 0; i < prxb->nr_subframes; i++) {
@@ -699,8 +695,7 @@ static void RxReorderIndicatePacket(struct ieee80211_device *ieee,
IEEE80211_DEBUG(IEEE80211_DL_REORDER, "%s(): start RREORDER indicate\n", __func__);
pReorderEntry = list_entry(pTS->rx_pending_pkt_list.prev, struct rx_reorder_entry, List);
if (SN_LESS(pReorderEntry->SeqNum, pTS->rx_indicate_seq) ||
- SN_EQUAL(pReorderEntry->SeqNum, pTS->rx_indicate_seq))
- {
+ SN_EQUAL(pReorderEntry->SeqNum, pTS->rx_indicate_seq)) {
/* This protect buffer from overflow. */
if (index >= REORDER_WIN_SIZE) {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "RxReorderIndicatePacket(): Buffer overflow!! \n");
@@ -922,8 +917,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
frag = WLAN_GET_SEQ_FRAG(sc);
hdrlen = ieee80211_get_hdrlen(fc);
- if (HTCCheck(ieee, skb->data))
- {
+ if (HTCCheck(ieee, skb->data)) {
if (net_ratelimit())
printk("find HTCControl\n");
hdrlen += 4;
@@ -1010,8 +1004,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
hdr->addr2,
Frame_QoSTID((u8 *)(skb->data)),
RX_DIR,
- true))
- {
+ true)) {
// IEEE80211_DEBUG(IEEE80211_DL_REORDER,"%s(): pRxTS->rx_last_frag_num is %d,frag is %d,pRxTS->rx_last_seq_num is %d,seq is %d\n",__func__,pRxTS->rx_last_frag_num,frag,pRxTS->rx_last_seq_num,WLAN_GET_SEQ_SEQ(sc));
if ((fc & (1 << 11)) &&
@@ -1119,8 +1112,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
/* skb: hdr + (possibly fragmented, possibly encrypted) payload */
if (ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
- (keyidx = ieee80211_rx_frame_decrypt(ieee, skb, crypt)) < 0)
- {
+ (keyidx = ieee80211_rx_frame_decrypt(ieee, skb, crypt)) < 0) {
printk("decrypt frame error\n");
goto rx_dropped;
}
@@ -1185,8 +1177,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
/* skb: hdr + (possible reassembled) full MSDU payload; possibly still
* encrypted/authenticated */
if (ieee->host_decrypt && (fc & IEEE80211_FCTL_WEP) &&
- ieee80211_rx_frame_decrypt_msdu(ieee, skb, keyidx, crypt))
- {
+ ieee80211_rx_frame_decrypt_msdu(ieee, skb, keyidx, crypt)) {
printk("==>decrypt msdu error\n");
goto rx_dropped;
}
@@ -1243,13 +1234,11 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
*/
//added by amy for reorder
if (ieee->current_network.qos_data.active && IsQoSDataFrame(skb->data)
- && !is_multicast_ether_addr(hdr->addr1))
- {
+ && !is_multicast_ether_addr(hdr->addr1)) {
TID = Frame_QoSTID(skb->data);
SeqNum = WLAN_GET_SEQ_SEQ(sc);
GetTs(ieee, (struct ts_common_info **) &pTS, hdr->addr2, TID, RX_DIR, true);
- if (TID != 0 && TID != 3)
- {
+ if (TID != 0 && TID != 3) {
ieee->bis_any_nonbepkts = true;
}
}
@@ -1549,15 +1538,12 @@ static inline void ieee80211_extract_country_ie(
u8 *addr2
)
{
- if (IS_DOT11D_ENABLE(ieee))
- {
- if (info_element->len != 0)
- {
+ if (IS_DOT11D_ENABLE(ieee)) {
+ if (info_element->len != 0) {
memcpy(network->CountryIeBuf, info_element->data, info_element->len);
network->CountryIeLen = info_element->len;
- if (!IS_COUNTRY_IE_VALID(ieee))
- {
+ if (!IS_COUNTRY_IE_VALID(ieee)) {
dot11d_update_country_ie(ieee, addr2, info_element->len, info_element->data);
}
}
@@ -1567,8 +1553,7 @@ static inline void ieee80211_extract_country_ie(
// some AP (e.g. Cisco 1242) don't include country IE in their
// probe response frame.
//
- if (IS_EQUAL_CIE_SRC(ieee, addr2))
- {
+ if (IS_EQUAL_CIE_SRC(ieee, addr2)) {
UPDATE_CIE_WATCHDOG(ieee);
}
}
@@ -1865,8 +1850,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
if (info_element->len >= 3 &&
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x0c &&
- info_element->data[2] == 0x43)
- {
+ info_element->data[2] == 0x43) {
network->ralink_cap_exist = true;
} else
network->ralink_cap_exist = false;
@@ -1878,8 +1862,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
(info_element->len >= 3 &&
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x13 &&
- info_element->data[2] == 0x74))
- {
+ info_element->data[2] == 0x74)) {
printk("========>%s(): athros AP is exist\n", __func__);
network->atheros_cap_exist = true;
} else
@@ -1888,8 +1871,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
if (info_element->len >= 3 &&
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x40 &&
- info_element->data[2] == 0x96)
- {
+ info_element->data[2] == 0x96) {
network->cisco_cap_exist = true;
} else
network->cisco_cap_exist = false;
@@ -1898,22 +1880,18 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x40 &&
info_element->data[2] == 0x96 &&
- info_element->data[3] == 0x01)
- {
- if (info_element->len == 6)
- {
+ info_element->data[3] == 0x01) {
+ if (info_element->len == 6) {
memcpy(network->CcxRmState, &info_element[4], 2);
if (network->CcxRmState[0] != 0)
- {
network->bCcxRmEnable = true;
- } else
+ else
network->bCcxRmEnable = false;
//
// CCXv4 Table 59-1 MBSSID Masks.
//
network->MBssidMask = network->CcxRmState[1] & 0x07;
- if (network->MBssidMask != 0)
- {
+ if (network->MBssidMask != 0) {
network->bMBssidValid = true;
network->MBssidMask = 0xff << (network->MBssidMask);
ether_addr_copy(network->MBssid, network->bssid);
@@ -1929,8 +1907,7 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
info_element->data[0] == 0x00 &&
info_element->data[1] == 0x40 &&
info_element->data[2] == 0x96 &&
- info_element->data[3] == 0x03)
- {
+ info_element->data[3] == 0x03) {
if (info_element->len == 5) {
network->bWithCcxVerNum = true;
network->BssCcxVerNumber = info_element->data[4];
@@ -1985,16 +1962,14 @@ int ieee80211_parse_info_param(struct ieee80211_device *ieee,
case MFIE_TYPE_AIRONET:
IEEE80211_DEBUG_SCAN("MFIE_TYPE_AIRONET: %d bytes\n",
info_element->len);
- if (info_element->len > IE_CISCO_FLAG_POSITION)
- {
+ if (info_element->len > IE_CISCO_FLAG_POSITION) {
network->bWithAironetIE = true;
// CCX 1 spec v1.13, A01.1 CKIP Negotiation (page23):
// "A Cisco access point advertises support for CKIP in beacon and probe response packets,
// by adding an Aironet element and setting one or both of the CKIP negotiation bits."
if ((info_element->data[IE_CISCO_FLAG_POSITION] & SUPPORT_CKIP_MIC) ||
- (info_element->data[IE_CISCO_FLAG_POSITION] & SUPPORT_CKIP_PK))
- {
+ (info_element->data[IE_CISCO_FLAG_POSITION] & SUPPORT_CKIP_PK)) {
network->bCkipSupported = true;
} else {
network->bCkipSupported = false;
@@ -2214,8 +2189,7 @@ static inline void update_network(struct ieee80211_network *dst,
dst->rates_len = src->rates_len;
memcpy(dst->rates_ex, src->rates_ex, src->rates_ex_len);
dst->rates_ex_len = src->rates_ex_len;
- if (src->ssid_len > 0)
- {
+ if (src->ssid_len > 0) {
memset(dst->ssid, 0, dst->ssid_len);
dst->ssid_len = src->ssid_len;
memcpy(dst->ssid, src->ssid, src->ssid_len);
@@ -2224,8 +2198,7 @@ static inline void update_network(struct ieee80211_network *dst,
dst->flags = src->flags;
dst->time_stamp[0] = src->time_stamp[0];
dst->time_stamp[1] = src->time_stamp[1];
- if (src->flags & NETWORK_HAS_ERP_VALUE)
- {
+ if (src->flags & NETWORK_HAS_ERP_VALUE) {
dst->erp_value = src->erp_value;
dst->berp_info_valid = src->berp_info_valid = true;
}
@@ -2379,41 +2352,33 @@ static inline void ieee80211_process_probe_response(
if (!is_legal_channel(ieee, network->channel))
goto out;
- if (ieee->bGlobalDomain)
- {
- if (fc == IEEE80211_STYPE_PROBE_RESP)
- {
- // Case 1: Country code
+ if (ieee->bGlobalDomain) {
+ if (fc == IEEE80211_STYPE_PROBE_RESP) {
if (IS_COUNTRY_IE_VALID(ieee)) {
+ // Case 1: Country code
if (!is_legal_channel(ieee, network->channel)) {
printk("GetScanInfo(): For Country code, filter probe response at channel(%d).\n", network->channel);
goto out;
}
- }
- // Case 2: No any country code.
- else
- {
+ } else {
+ // Case 2: No any country code.
// Filter over channel ch12~14
- if (network->channel > 11)
- {
+ if (network->channel > 11) {
printk("GetScanInfo(): For Global Domain, filter probe response at channel(%d).\n", network->channel);
goto out;
}
}
} else {
- // Case 1: Country code
if (IS_COUNTRY_IE_VALID(ieee)) {
+ // Case 1: Country code
if (!is_legal_channel(ieee, network->channel)) {
printk("GetScanInfo(): For Country code, filter beacon at channel(%d).\n", network->channel);
goto out;
}
- }
- // Case 2: No any country code.
- else
- {
+ } else {
+ // Case 2: No any country code.
// Filter over channel ch12~14
- if (network->channel > 14)
- {
+ if (network->channel > 14) {
printk("GetScanInfo(): For Global Domain, filter beacon at channel(%d).\n", network->channel);
goto out;
}
@@ -2442,8 +2407,7 @@ static inline void ieee80211_process_probe_response(
else
ieee->current_network.buseprotection = false;
}
- if (is_beacon(beacon->header.frame_ctl))
- {
+ if (is_beacon(beacon->header.frame_ctl)) {
if (ieee->state == IEEE80211_LINKED)
ieee->LinkDetectInfo.NumRecvBcnInPeriod++;
} else //hidden AP
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
index fc6eb97801e1..c49357067735 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
@@ -214,7 +214,8 @@ int ieee80211_encrypt_fragment(
}
-void ieee80211_txb_free(struct ieee80211_txb *txb) {
+void ieee80211_txb_free(struct ieee80211_txb *txb)
+{
//int i;
if (unlikely(!txb))
return;
@@ -333,8 +334,7 @@ static void ieee80211_tx_query_agg_cap(struct ieee80211_device *ieee,
}
}
FORCED_AGG_SETTING:
- switch (pHTInfo->ForcedAMPDUMode )
- {
+ switch (pHTInfo->ForcedAMPDUMode ) {
case HT_AGG_AUTO:
break;
@@ -424,19 +424,15 @@ static void ieee80211_query_protectionmode(struct ieee80211_device *ieee,
if (is_broadcast_ether_addr(skb->data+16)) //check addr3 as infrastructure add3 is DA.
return;
- if (ieee->mode < IEEE_N_24G) //b, g mode
- {
+ if (ieee->mode < IEEE_N_24G) /* b, g mode */ {
// (1) RTS_Threshold is compared to the MPDU, not MSDU.
// (2) If there are more than one frag in this MSDU, only the first frag uses protection frame.
// Other fragments are protected by previous fragment.
// So we only need to check the length of first fragment.
- if (skb->len > ieee->rts)
- {
+ if (skb->len > ieee->rts) {
tcb_desc->bRTSEnable = true;
tcb_desc->rts_rate = MGN_24M;
- }
- else if (ieee->current_network.buseprotection)
- {
+ } else if (ieee->current_network.buseprotection) {
// Use CTS-to-SELF in protection mode.
tcb_desc->bRTSEnable = true;
tcb_desc->bCTSEnable = true;
@@ -444,43 +440,35 @@ static void ieee80211_query_protectionmode(struct ieee80211_device *ieee,
}
//otherwise return;
return;
- }
- else
- {// 11n High throughput case.
+ } else { // 11n High throughput case.
PRT_HIGH_THROUGHPUT pHTInfo = ieee->pHTInfo;
- while (true)
- {
+ while (true) {
//check ERP protection
- if (ieee->current_network.buseprotection)
- {// CTS-to-SELF
+ if (ieee->current_network.buseprotection) {// CTS-to-SELF
tcb_desc->bRTSEnable = true;
tcb_desc->bCTSEnable = true;
tcb_desc->rts_rate = MGN_24M;
break;
}
//check HT op mode
- if(pHTInfo->bCurrentHTSupport && pHTInfo->bEnableHT)
- {
+ if(pHTInfo->bCurrentHTSupport && pHTInfo->bEnableHT) {
u8 HTOpMode = pHTInfo->CurrentOpMode;
if((pHTInfo->bCurBW40MHz && (HTOpMode == 2 || HTOpMode == 3)) ||
- (!pHTInfo->bCurBW40MHz && HTOpMode == 3) )
- {
+ (!pHTInfo->bCurBW40MHz && HTOpMode == 3)) {
tcb_desc->rts_rate = MGN_24M; // Rate is 24Mbps.
tcb_desc->bRTSEnable = true;
break;
}
}
//check rts
- if (skb->len > ieee->rts)
- {
+ if (skb->len > ieee->rts) {
tcb_desc->rts_rate = MGN_24M; // Rate is 24Mbps.
tcb_desc->bRTSEnable = true;
break;
}
//to do list: check MIMO power save condition.
//check AMPDU aggregation for TXOP
- if(tcb_desc->bAMPDUEnable)
- {
+ if(tcb_desc->bAMPDUEnable) {
tcb_desc->rts_rate = MGN_24M; // Rate is 24Mbps.
// According to 8190 design, firmware sends CF-End only if RTS/CTS is enabled. However, it degrads
// throughput around 10M, so we disable of this mechanism. 2007.08.03 by Emily
@@ -488,8 +476,7 @@ static void ieee80211_query_protectionmode(struct ieee80211_device *ieee,
break;
}
//check IOT action
- if(pHTInfo->IOTAction & HT_IOT_ACT_FORCED_CTS2SELF)
- {
+ if(pHTInfo->IOTAction & HT_IOT_ACT_FORCED_CTS2SELF) {
tcb_desc->bCTSEnable = true;
tcb_desc->rts_rate = MGN_24M;
tcb_desc->bRTSEnable = true;
@@ -541,8 +528,7 @@ static void ieee80211_txrate_selectmode(struct ieee80211_device *ieee,
if (ieee->bTxUseDriverAssingedRate)
tcb_desc->bTxUseDriverAssingedRate = true;
- if (!tcb_desc->bTxDisableRateFallBack || !tcb_desc->bTxUseDriverAssingedRate)
- {
+ if (!tcb_desc->bTxDisableRateFallBack || !tcb_desc->bTxUseDriverAssingedRate) {
if (ieee->iw_mode == IW_MODE_INFRA || ieee->iw_mode == IW_MODE_ADHOC)
tcb_desc->RATRIndex = 0;
}
@@ -553,11 +539,9 @@ static void ieee80211_query_seqnum(struct ieee80211_device *ieee,
{
if (is_multicast_ether_addr(dst))
return;
- if (IsQoSDataFrame(skb->data)) //we deal qos data only
- {
+ if (IsQoSDataFrame(skb->data)) /* we deal qos data only */ {
struct tx_ts_record *pTS = NULL;
- if (!GetTs(ieee, (struct ts_common_info **)(&pTS), dst, skb->priority, TX_DIR, true))
- {
+ if (!GetTs(ieee, (struct ts_common_info **)(&pTS), dst, skb->priority, TX_DIR, true)) {
return;
}
pTS->tx_cur_seq = (pTS->tx_cur_seq + 1) % 4096;
@@ -749,15 +733,13 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
}
skb_reserve(skb_frag, ieee->tx_headroom);
- if (encrypt){
+ if (encrypt) {
if (ieee->hwsec_active)
tcb_desc->bHwSec = 1;
else
tcb_desc->bHwSec = 0;
skb_reserve(skb_frag, crypt->ops->extra_prefix_len);
- }
- else
- {
+ } else {
tcb_desc->bHwSec = 0;
}
frag_hdr = skb_put_data(skb_frag, &header, hdr_len);
@@ -775,8 +757,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
bytes = bytes_last_frag;
}
//if(ieee->current_network.QoS_Enable)
- if(qos_actived)
- {
+ if(qos_actived) {
// add 1 only indicate to corresponding seq number control 2006/7/12
frag_hdr->seq_ctl = cpu_to_le16(ieee->seq_ctrl[UP2AC(skb->priority)+1]<<4 | i);
} else {
@@ -806,17 +787,16 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
skb_put(skb_frag, 4);
}
- if(qos_actived)
- {
- if (ieee->seq_ctrl[UP2AC(skb->priority) + 1] == 0xFFF)
- ieee->seq_ctrl[UP2AC(skb->priority) + 1] = 0;
- else
- ieee->seq_ctrl[UP2AC(skb->priority) + 1]++;
+ if (qos_actived) {
+ if (ieee->seq_ctrl[UP2AC(skb->priority) + 1] == 0xFFF)
+ ieee->seq_ctrl[UP2AC(skb->priority) + 1] = 0;
+ else
+ ieee->seq_ctrl[UP2AC(skb->priority) + 1]++;
} else {
- if (ieee->seq_ctrl[0] == 0xFFF)
- ieee->seq_ctrl[0] = 0;
- else
- ieee->seq_ctrl[0]++;
+ if (ieee->seq_ctrl[0] == 0xFFF)
+ ieee->seq_ctrl[0] = 0;
+ else
+ ieee->seq_ctrl[0]++;
}
} else {
if (unlikely(skb->len < sizeof(struct rtl_80211_hdr_3addr))) {
@@ -839,8 +819,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
success:
//WB add to fill data tcb_desc here. only first fragment is considered, need to change, and you may remove to other place.
- if (txb)
- {
+ if (txb) {
struct cb_desc *tcb_desc = (struct cb_desc *)(txb->fragments[0]->cb + MAX_DEV_ADDR_SIZE);
tcb_desc->bTxEnableFwCalcDur = 1;
if (is_multicast_ether_addr(header.addr1))
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
index be08cd1d37a7..8ad85331f020 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
@@ -130,8 +130,7 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
max_rate = rate;
}
- if (network->mode >= IEEE_N_24G)//add N rate here;
- {
+ if (network->mode >= IEEE_N_24G) /* add N rate here */ {
struct ht_capability_ele *ht_cap = NULL;
bool is40M = false, isShortGI = false;
u8 max_mcs = 0;
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
index b7769bca9740..3fca0d3a1d05 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
@@ -273,8 +273,7 @@ typedef enum _HT_AGGRE_SIZE {
}HT_AGGRE_SIZE_E, *PHT_AGGRE_SIZE_E;
/* Indicate different AP vendor for IOT issue */
-typedef enum _HT_IOT_PEER
-{
+typedef enum _HT_IOT_PEER {
HT_IOT_PEER_UNKNOWN = 0,
HT_IOT_PEER_REALTEK = 1,
HT_IOT_PEER_BROADCOM = 2,
--
2.22.0
Checkpatch emits several errors, warnings, and checks about spacing.
Apply checkpatch's suggested spacing rules.
Signed-off-by: Stephen Brennan <[email protected]>
---
drivers/staging/rtl8192u/ieee80211/dot11d.c | 10 ++--
.../staging/rtl8192u/ieee80211/ieee80211.h | 4 +-
.../rtl8192u/ieee80211/ieee80211_crypt.c | 2 +-
.../rtl8192u/ieee80211/ieee80211_crypt_tkip.c | 22 ++++----
.../rtl8192u/ieee80211/ieee80211_crypt_wep.c | 4 +-
.../staging/rtl8192u/ieee80211/ieee80211_rx.c | 2 +-
.../rtl8192u/ieee80211/ieee80211_softmac_wx.c | 14 +++---
.../staging/rtl8192u/ieee80211/ieee80211_tx.c | 50 +++++++++----------
.../staging/rtl8192u/ieee80211/ieee80211_wx.c | 32 ++++++------
.../rtl8192u/ieee80211/rtl819x_BAProc.c | 12 ++---
.../staging/rtl8192u/ieee80211/rtl819x_HT.h | 6 +--
.../rtl8192u/ieee80211/rtl819x_TSProc.c | 14 +++---
12 files changed, 86 insertions(+), 86 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/dot11d.c b/drivers/staging/rtl8192u/ieee80211/dot11d.c
index 130ddfe9868f..bc642076b96f 100644
--- a/drivers/staging/rtl8192u/ieee80211/dot11d.c
+++ b/drivers/staging/rtl8192u/ieee80211/dot11d.c
@@ -12,7 +12,7 @@ void rtl8192u_dot11d_init(struct ieee80211_device *ieee)
dot11d_info->state = DOT11D_STATE_NONE;
dot11d_info->country_ie_len = 0;
memset(dot11d_info->channel_map, 0, MAX_CHANNEL_NUMBER + 1);
- memset(dot11d_info->max_tx_pwr_dbm_list, 0xFF, MAX_CHANNEL_NUMBER+1);
+ memset(dot11d_info->max_tx_pwr_dbm_list, 0xFF, MAX_CHANNEL_NUMBER + 1);
RESET_CIE_WATCHDOG(ieee);
netdev_info(ieee->dev, "rtl8192u_dot11d_init()\n");
@@ -25,8 +25,8 @@ void dot11d_reset(struct ieee80211_device *ieee)
u32 i;
struct rt_dot11d_info *dot11d_info = GET_DOT11D_INFO(ieee);
/* Clear old channel map */
- memset(dot11d_info->channel_map, 0, MAX_CHANNEL_NUMBER+1);
- memset(dot11d_info->max_tx_pwr_dbm_list, 0xFF, MAX_CHANNEL_NUMBER+1);
+ memset(dot11d_info->channel_map, 0, MAX_CHANNEL_NUMBER + 1);
+ memset(dot11d_info->max_tx_pwr_dbm_list, 0xFF, MAX_CHANNEL_NUMBER + 1);
/* Set new channel map */
for (i = 1; i <= 11; i++)
(dot11d_info->channel_map)[i] = 1;
@@ -56,8 +56,8 @@ void dot11d_update_country_ie(struct ieee80211_device *dev, u8 *pTaddr,
u8 i, j, NumTriples, MaxChnlNum;
struct chnl_txpower_triple *pTriple;
- memset(dot11d_info->channel_map, 0, MAX_CHANNEL_NUMBER+1);
- memset(dot11d_info->max_tx_pwr_dbm_list, 0xFF, MAX_CHANNEL_NUMBER+1);
+ memset(dot11d_info->channel_map, 0, MAX_CHANNEL_NUMBER + 1);
+ memset(dot11d_info->max_tx_pwr_dbm_list, 0xFF, MAX_CHANNEL_NUMBER + 1);
MaxChnlNum = 0;
NumTriples = (CoutryIeLen - 3) / 3; /* skip 3-byte country string. */
pTriple = (struct chnl_txpower_triple *)(pCoutryIe + 3);
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
index 6b7828a9e71d..daebbbd8f4dd 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
@@ -456,7 +456,7 @@ do { if (ieee80211_debug_level & (level)) \
do { if ((ieee80211_debug_level & (level)) == (level)) \
{ \
int i; \
- u8 *pdata = (u8 *) data; \
+ u8 *pdata = (u8 *)data; \
printk(KERN_DEBUG "ieee80211: %s()\n", __func__); \
for (i = 0; i < (int)(datalen); i++) { \
printk("%2x ", pdata[i]); \
@@ -468,7 +468,7 @@ do { if (ieee80211_debug_level & (level)) \
} while (0)
#else
#define IEEE80211_DEBUG (level, fmt, args...) do {} while (0)
-#define IEEE80211_DEBUG_DATA (level, data, datalen) do {} while(0)
+#define IEEE80211_DEBUG_DATA (level, data, datalen) do {} while (0)
#endif /* CONFIG_IEEE80211_DEBUG */
/* debug macros not dependent on CONFIG_IEEE80211_DEBUG */
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.c
index 36987fccac5d..01012dddcd73 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt.c
@@ -176,7 +176,7 @@ struct ieee80211_crypto_ops *ieee80211_get_crypto_ops(const char *name)
}
-static void *ieee80211_crypt_null_init(int keyidx) { return (void *) 1; }
+static void *ieee80211_crypt_null_init(int keyidx) { return (void *)1; }
static void ieee80211_crypt_null_deinit(void *priv) {}
static struct ieee80211_crypto_ops ieee80211_crypt_null = {
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c
index 0927b2b15151..6f4710171151 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_tkip.c
@@ -160,7 +160,7 @@ static inline u16 Hi16(u32 val)
static inline u16 Mk16(u8 hi, u8 lo)
{
- return lo | (((u16) hi) << 8);
+ return lo | (((u16)hi) << 8);
}
static const u16 Sbox[256] = {
@@ -238,7 +238,7 @@ static void tkip_mixing_phase2(u8 *WEPSeed, const u8 *TK, const u16 *TTAK,
* Make temporary area overlap WEP seed so that the final copy can be
* avoided on little endian hosts.
*/
- u16 *PPK = (u16 *) &WEPSeed[4];
+ u16 *PPK = (u16 *)&WEPSeed[4];
/* Step 1 - make copy of TTAK and bring in TSC */
PPK[0] = TTAK[0];
@@ -299,7 +299,7 @@ static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
skb->len < hdr_len)
return -1;
- hdr = (struct rtl_80211_hdr_4addr *) skb->data;
+ hdr = (struct rtl_80211_hdr_4addr *)skb->data;
if (!tcb_desc->bHwSec) {
if (!tkey->tx_phase1_done) {
@@ -343,7 +343,7 @@ static int ieee80211_tkip_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
icv[2] = crc >> 16;
icv[3] = crc >> 24;
crypto_sync_skcipher_setkey(tkey->tx_tfm_arc4, rc4key, 16);
- sg_init_one(&sg, pos, len+4);
+ sg_init_one(&sg, pos, len + 4);
skcipher_request_set_sync_tfm(req, tkey->tx_tfm_arc4);
skcipher_request_set_callback(req, 0, NULL, NULL);
skcipher_request_set_crypt(req, &sg, &sg, len + 4, NULL);
@@ -383,7 +383,7 @@ static int ieee80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
if (skb->len < hdr_len + 8 + 4)
return -1;
- hdr = (struct rtl_80211_hdr_4addr *) skb->data;
+ hdr = (struct rtl_80211_hdr_4addr *)skb->data;
pos = skb->data + hdr_len;
keyidx = pos[3];
if (!(keyidx & BIT(5))) {
@@ -435,7 +435,7 @@ static int ieee80211_tkip_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
plen = skb->len - hdr_len - 12;
crypto_sync_skcipher_setkey(tkey->rx_tfm_arc4, rc4key, 16);
- sg_init_one(&sg, pos, plen+4);
+ sg_init_one(&sg, pos, plen + 4);
skcipher_request_set_sync_tfm(req, tkey->rx_tfm_arc4);
skcipher_request_set_callback(req, 0, NULL, NULL);
@@ -523,7 +523,7 @@ static void michael_mic_hdr(struct sk_buff *skb, u8 *hdr)
{
struct rtl_80211_hdr_4addr *hdr11;
- hdr11 = (struct rtl_80211_hdr_4addr *) skb->data;
+ hdr11 = (struct rtl_80211_hdr_4addr *)skb->data;
switch (le16_to_cpu(hdr11->frame_ctl) &
(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS)) {
case IEEE80211_FCTL_TODS:
@@ -556,7 +556,7 @@ static int ieee80211_michael_mic_add(struct sk_buff *skb, int hdr_len, void *pri
u8 *pos;
struct rtl_80211_hdr_4addr *hdr;
- hdr = (struct rtl_80211_hdr_4addr *) skb->data;
+ hdr = (struct rtl_80211_hdr_4addr *)skb->data;
if (skb_tailroom(skb) < 8 || skb->len < hdr_len) {
printk(KERN_DEBUG "Invalid packet for Michael MIC add "
@@ -599,7 +599,7 @@ static void ieee80211_michael_mic_failure(struct net_device *dev,
memcpy(ev.src_addr.sa_data, hdr->addr2, ETH_ALEN);
memset(&wrqu, 0, sizeof(wrqu));
wrqu.data.length = sizeof(ev);
- wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu, (char *) &ev);
+ wireless_send_event(dev, IWEVMICHAELMICFAILURE, &wrqu, (char *)&ev);
}
static int ieee80211_michael_mic_verify(struct sk_buff *skb, int keyidx,
@@ -609,7 +609,7 @@ static int ieee80211_michael_mic_verify(struct sk_buff *skb, int keyidx,
u8 mic[8];
struct rtl_80211_hdr_4addr *hdr;
- hdr = (struct rtl_80211_hdr_4addr *) skb->data;
+ hdr = (struct rtl_80211_hdr_4addr *)skb->data;
if (!tkey->key_set)
return -1;
@@ -626,7 +626,7 @@ static int ieee80211_michael_mic_verify(struct sk_buff *skb, int keyidx,
return -1;
if (memcmp(mic, skb->data + skb->len - 8, 8) != 0) {
struct rtl_80211_hdr_4addr *hdr;
- hdr = (struct rtl_80211_hdr_4addr *) skb->data;
+ hdr = (struct rtl_80211_hdr_4addr *)skb->data;
printk(KERN_DEBUG "%s: Michael MIC verification failed for "
"MSDU from %pM keyidx=%d\n",
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_wep.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_wep.c
index 805493a0870d..26482c3dcd1c 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_wep.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_wep.c
@@ -135,7 +135,7 @@ static int prism2_wep_encrypt(struct sk_buff *skb, int hdr_len, void *priv)
icv[3] = crc >> 24;
crypto_sync_skcipher_setkey(wep->tx_tfm, key, klen);
- sg_init_one(&sg, pos, len+4);
+ sg_init_one(&sg, pos, len + 4);
skcipher_request_set_sync_tfm(req, wep->tx_tfm);
skcipher_request_set_callback(req, 0, NULL, NULL);
@@ -192,7 +192,7 @@ static int prism2_wep_decrypt(struct sk_buff *skb, int hdr_len, void *priv)
SYNC_SKCIPHER_REQUEST_ON_STACK(req, wep->rx_tfm);
crypto_sync_skcipher_setkey(wep->rx_tfm, key, klen);
- sg_init_one(&sg, pos, plen+4);
+ sg_init_one(&sg, pos, plen + 4);
skcipher_request_set_sync_tfm(req, wep->rx_tfm);
skcipher_request_set_callback(req, 0, NULL, NULL);
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
index 9d8b2ff700fe..a1462ec55767 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_rx.c
@@ -1237,7 +1237,7 @@ int ieee80211_rx(struct ieee80211_device *ieee, struct sk_buff *skb,
&& !is_multicast_ether_addr(hdr->addr1)) {
TID = Frame_QoSTID(skb->data);
SeqNum = WLAN_GET_SEQ_SEQ(sc);
- GetTs(ieee, (struct ts_common_info **) &pTS, hdr->addr2, TID, RX_DIR, true);
+ GetTs(ieee, (struct ts_common_info **)&pTS, hdr->addr2, TID, RX_DIR, true);
if (TID != 0 && TID != 3) {
ieee->bis_any_nonbepkts = true;
}
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c
index 4a8d16a45fc5..b1baaa18b129 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_softmac_wx.c
@@ -42,8 +42,8 @@ int ieee80211_wx_set_freq(struct ieee80211_device *ieee, struct iw_request_info
/* if setting by freq convert to channel */
if (fwrq->e == 1) {
- if ((fwrq->m >= (int) 2.412e8 &&
- fwrq->m <= (int) 2.487e8)) {
+ if ((fwrq->m >= (int)2.412e8 &&
+ fwrq->m <= (int)2.487e8)) {
int f = fwrq->m / 100000;
int c = 0;
@@ -92,7 +92,7 @@ int ieee80211_wx_get_freq(struct ieee80211_device *ieee,
if (ieee->current_network.channel == 0)
return -1;
/* NM 0.7.0 will not accept channel any more. */
- fwrq->m = ieee80211_wlan_frequencies[ieee->current_network.channel-1] * 100000;
+ fwrq->m = ieee80211_wlan_frequencies[ieee->current_network.channel - 1] * 100000;
fwrq->e = 1;
/* fwrq->m = ieee->current_network.channel; */
/* fwrq->e = 0; */
@@ -220,7 +220,7 @@ int ieee80211_wx_set_rate(struct ieee80211_device *ieee,
u32 target_rate = wrqu->bitrate.value;
- ieee->rate = target_rate/100000;
+ ieee->rate = target_rate / 100000;
/* FIXME: we might want to limit rate also in management protocols. */
return 0;
}
@@ -415,9 +415,9 @@ int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
if (wrqu->essid.flags && wrqu->essid.length) {
/* first flush current network.ssid */
- len = ((wrqu->essid.length-1) < IW_ESSID_MAX_SIZE) ? (wrqu->essid.length-1) : IW_ESSID_MAX_SIZE;
- strncpy(ieee->current_network.ssid, extra, len+1);
- ieee->current_network.ssid_len = len+1;
+ len = ((wrqu->essid.length - 1) < IW_ESSID_MAX_SIZE) ? (wrqu->essid.length - 1) : IW_ESSID_MAX_SIZE;
+ strncpy(ieee->current_network.ssid, extra, len + 1);
+ ieee->current_network.ssid_len = len + 1;
ieee->ssid_set = 1;
} else {
ieee->ssid_set = 0;
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
index c49357067735..e76bdedc8409 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_tx.c
@@ -294,7 +294,7 @@ static void ieee80211_tx_query_agg_cap(struct ieee80211_device *ieee,
struct tx_ts_record *pTxTs = NULL;
struct rtl_80211_hdr_1addr *hdr = (struct rtl_80211_hdr_1addr *)skb->data;
- if (!pHTInfo->bCurrentHTSupport||!pHTInfo->bEnableHT)
+ if (!pHTInfo->bCurrentHTSupport || !pHTInfo->bEnableHT)
return;
if (!IsQoSDataFrame(skb->data))
return;
@@ -334,7 +334,7 @@ static void ieee80211_tx_query_agg_cap(struct ieee80211_device *ieee,
}
}
FORCED_AGG_SETTING:
- switch (pHTInfo->ForcedAMPDUMode ) {
+ switch (pHTInfo->ForcedAMPDUMode) {
case HT_AGG_AUTO:
break;
@@ -372,7 +372,7 @@ ieee80211_query_HTCapShortGI(struct ieee80211_device *ieee, struct cb_desc *tcb_
tcb_desc->bUseShortGI = false;
- if (!pHTInfo->bCurrentHTSupport||!pHTInfo->bEnableHT)
+ if (!pHTInfo->bCurrentHTSupport || !pHTInfo->bEnableHT)
return;
if (pHTInfo->bForcedShortGI) {
@@ -380,9 +380,9 @@ ieee80211_query_HTCapShortGI(struct ieee80211_device *ieee, struct cb_desc *tcb_
return;
}
- if ((pHTInfo->bCurBW40MHz==true) && pHTInfo->bCurShortGI40MHz)
+ if ((pHTInfo->bCurBW40MHz == true) && pHTInfo->bCurShortGI40MHz)
tcb_desc->bUseShortGI = true;
- else if ((pHTInfo->bCurBW40MHz==false) && pHTInfo->bCurShortGI20MHz)
+ else if ((pHTInfo->bCurBW40MHz == false) && pHTInfo->bCurShortGI20MHz)
tcb_desc->bUseShortGI = true;
}
@@ -393,16 +393,16 @@ static void ieee80211_query_BandwidthMode(struct ieee80211_device *ieee,
tcb_desc->bPacketBW = false;
- if (!pHTInfo->bCurrentHTSupport||!pHTInfo->bEnableHT)
+ if (!pHTInfo->bCurrentHTSupport || !pHTInfo->bEnableHT)
return;
if (tcb_desc->bMulticast || tcb_desc->bBroadcast)
return;
- if ((tcb_desc->data_rate & 0x80)==0) // If using legacy rate, it shall use 20MHz channel.
+ if ((tcb_desc->data_rate & 0x80) == 0) // If using legacy rate, it shall use 20MHz channel.
return;
//BandWidthAutoSwitch is for auto switch to 20 or 40 in long distance
- if(pHTInfo->bCurBW40MHz && pHTInfo->bCurTxBW40MHz && !ieee->bandwidth_auto_switch.bforced_tx20Mhz)
+ if (pHTInfo->bCurBW40MHz && pHTInfo->bCurTxBW40MHz && !ieee->bandwidth_auto_switch.bforced_tx20Mhz)
tcb_desc->bPacketBW = true;
return;
}
@@ -418,10 +418,10 @@ static void ieee80211_query_protectionmode(struct ieee80211_device *ieee,
tcb_desc->RTSSC = 0; // 20MHz: Don't care; 40MHz: Duplicate.
tcb_desc->bRTSBW = false; // RTS frame bandwidth is always 20MHz
- if(tcb_desc->bBroadcast || tcb_desc->bMulticast)//only unicast frame will use rts/cts
+ if (tcb_desc->bBroadcast || tcb_desc->bMulticast) //only unicast frame will use rts/cts
return;
- if (is_broadcast_ether_addr(skb->data+16)) //check addr3 as infrastructure add3 is DA.
+ if (is_broadcast_ether_addr(skb->data + 16)) //check addr3 as infrastructure add3 is DA.
return;
if (ieee->mode < IEEE_N_24G) /* b, g mode */ {
@@ -451,9 +451,9 @@ static void ieee80211_query_protectionmode(struct ieee80211_device *ieee,
break;
}
//check HT op mode
- if(pHTInfo->bCurrentHTSupport && pHTInfo->bEnableHT) {
+ if (pHTInfo->bCurrentHTSupport && pHTInfo->bEnableHT) {
u8 HTOpMode = pHTInfo->CurrentOpMode;
- if((pHTInfo->bCurBW40MHz && (HTOpMode == 2 || HTOpMode == 3)) ||
+ if ((pHTInfo->bCurBW40MHz && (HTOpMode == 2 || HTOpMode == 3)) ||
(!pHTInfo->bCurBW40MHz && HTOpMode == 3)) {
tcb_desc->rts_rate = MGN_24M; // Rate is 24Mbps.
tcb_desc->bRTSEnable = true;
@@ -468,7 +468,7 @@ static void ieee80211_query_protectionmode(struct ieee80211_device *ieee,
}
//to do list: check MIMO power save condition.
//check AMPDU aggregation for TXOP
- if(tcb_desc->bAMPDUEnable) {
+ if (tcb_desc->bAMPDUEnable) {
tcb_desc->rts_rate = MGN_24M; // Rate is 24Mbps.
// According to 8190 design, firmware sends CF-End only if RTS/CTS is enabled. However, it degrads
// throughput around 10M, so we disable of this mechanism. 2007.08.03 by Emily
@@ -476,7 +476,7 @@ static void ieee80211_query_protectionmode(struct ieee80211_device *ieee,
break;
}
//check IOT action
- if(pHTInfo->IOTAction & HT_IOT_ACT_FORCED_CTS2SELF) {
+ if (pHTInfo->IOTAction & HT_IOT_ACT_FORCED_CTS2SELF) {
tcb_desc->bCTSEnable = true;
tcb_desc->rts_rate = MGN_24M;
tcb_desc->bRTSEnable = true;
@@ -517,7 +517,7 @@ static void ieee80211_txrate_selectmode(struct ieee80211_device *ieee,
return;
}
- if (pMgntInfo->ForcedDataRate!= 0) {
+ if (pMgntInfo->ForcedDataRate != 0) {
pTcb->bTxDisableRateFallBack = true;
pTcb->bTxUseDriverAssingedRate = true;
return;
@@ -576,7 +576,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
/* If there is no driver handler to take the TXB, dont' bother
* creating it...
*/
- if ((!ieee->hard_start_xmit && !(ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE))||
+ if ((!ieee->hard_start_xmit && !(ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)) ||
((!ieee->softmac_data_hard_start_xmit && (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE)))) {
printk(KERN_WARNING "%s: No xmit handler.\n",
ieee->dev->name);
@@ -615,7 +615,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
/* Save source and destination addresses */
memcpy(&dest, skb->data, ETH_ALEN);
- memcpy(&src, skb->data+ETH_ALEN, ETH_ALEN);
+ memcpy(&src, skb->data + ETH_ALEN, ETH_ALEN);
/* Advance the SKB to the start of the payload */
skb_pull(skb, sizeof(struct ethhdr));
@@ -630,7 +630,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
fc = IEEE80211_FTYPE_DATA;
//if(ieee->current_network.QoS_Enable)
- if(qos_actived)
+ if (qos_actived)
fc |= IEEE80211_STYPE_QOS_DATA;
else
fc |= IEEE80211_STYPE_DATA;
@@ -724,7 +724,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
for (i = 0; i < nr_frags; i++) {
skb_frag = txb->fragments[i];
tcb_desc = (struct cb_desc *)(skb_frag->cb + MAX_DEV_ADDR_SIZE);
- if(qos_actived){
+ if (qos_actived) {
skb_frag->priority = skb->priority;//UP2AC(skb->priority);
tcb_desc->queue_index = UP2AC(skb->priority);
} else {
@@ -757,11 +757,11 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
bytes = bytes_last_frag;
}
//if(ieee->current_network.QoS_Enable)
- if(qos_actived) {
+ if (qos_actived) {
// add 1 only indicate to corresponding seq number control 2006/7/12
- frag_hdr->seq_ctl = cpu_to_le16(ieee->seq_ctrl[UP2AC(skb->priority)+1]<<4 | i);
+ frag_hdr->seq_ctl = cpu_to_le16(ieee->seq_ctrl[UP2AC(skb->priority) + 1] << 4 | i);
} else {
- frag_hdr->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0]<<4 | i);
+ frag_hdr->seq_ctl = cpu_to_le16(ieee->seq_ctrl[0] << 4 | i);
}
/* Put a SNAP header on the first fragment */
@@ -806,7 +806,7 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
}
txb = ieee80211_alloc_txb(1, skb->len, GFP_ATOMIC);
- if(!txb){
+ if (!txb) {
printk(KERN_WARNING "%s: Could not allocate TXB\n",
ieee->dev->name);
goto failed;
@@ -841,9 +841,9 @@ int ieee80211_xmit(struct sk_buff *skb, struct net_device *dev)
spin_unlock_irqrestore(&ieee->lock, flags);
dev_kfree_skb_any(skb);
if (txb) {
- if (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE){
+ if (ieee->softmac_features & IEEE_SOFTMAC_TX_QUEUE) {
ieee80211_softmac_xmit(txb, ieee);
- }else{
+ } else {
if ((*ieee->hard_start_xmit)(txb, dev) == 0) {
stats->tx_packets++;
stats->tx_bytes += __le16_to_cpu(txb->payload_size);
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
index 8ad85331f020..8ca7a7fd74f9 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211_wx.c
@@ -70,10 +70,10 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
}
/* Add the protocol name */
iwe.cmd = SIOCGIWNAME;
- for(i=0; i<ARRAY_SIZE(ieee80211_modes); i++) {
+ for (i = 0; i < ARRAY_SIZE(ieee80211_modes); i++) {
if (network->mode & BIT(i)) {
- sprintf(pname,ieee80211_modes[i].mode_string,ieee80211_modes[i].mode_size);
- pname +=ieee80211_modes[i].mode_size;
+ sprintf(pname, ieee80211_modes[i].mode_string, ieee80211_modes[i].mode_size);
+ pname += ieee80211_modes[i].mode_size;
}
}
*pname = '\0';
@@ -138,13 +138,13 @@ static inline char *rtl819x_translate_scan(struct ieee80211_device *ieee,
ht_cap = (struct ht_capability_ele *)&network->bssht.bdHTCapBuf[4];
else
ht_cap = (struct ht_capability_ele *)&network->bssht.bdHTCapBuf[0];
- is40M = (ht_cap->ChlWidth)?1:0;
- isShortGI = (ht_cap->ChlWidth)?
- ((ht_cap->ShortGI40Mhz)?1:0):
- ((ht_cap->ShortGI20Mhz)?1:0);
+ is40M = (ht_cap->ChlWidth) ? 1 : 0;
+ isShortGI = (ht_cap->ChlWidth) ?
+ ((ht_cap->ShortGI40Mhz) ? 1 : 0) :
+ ((ht_cap->ShortGI20Mhz) ? 1 : 0);
max_mcs = HTGetHighestMCSRate(ieee, ht_cap->MCS, MCS_FILTER_ALL);
- rate = MCS_DATA_RATE[is40M][isShortGI][max_mcs&0x7f];
+ rate = MCS_DATA_RATE[is40M][isShortGI][max_mcs & 0x7f];
if (rate > max_rate)
max_rate = rate;
}
@@ -242,7 +242,7 @@ int ieee80211_wx_get_scan(struct ieee80211_device *ieee,
list_for_each_entry(network, &ieee->network_list, list) {
i++;
- if((stop-ev)<200) {
+ if ((stop - ev) < 200) {
err = -E2BIG;
break;
}
@@ -453,7 +453,7 @@ int ieee80211_wx_get_encode(struct ieee80211_device *ieee,
IEEE80211_DEBUG_WX("GET_ENCODE\n");
- if(ieee->iw_mode == IW_MODE_MONITOR)
+ if (ieee->iw_mode == IW_MODE_MONITOR)
return -1;
key = erq->flags & IW_ENCODE_INDEX;
@@ -570,7 +570,7 @@ int ieee80211_wx_set_encode_ext(struct ieee80211_device *ieee,
ret = -EINVAL;
goto done;
}
- printk("alg name:%s\n",alg);
+ printk("alg name:%s\n", alg);
ops = try_then_request_module(ieee80211_get_crypto_ops(alg), module);
if (!ops) {
@@ -687,7 +687,7 @@ int ieee80211_wx_get_encode_ext(struct ieee80211_device *ieee,
ext->key_len = 0;
encoding->flags |= IW_ENCODE_DISABLED;
} else {
- if (strcmp(crypt->ops->name, "WEP") == 0 )
+ if (strcmp(crypt->ops->name, "WEP") == 0)
ext->alg = IW_ENCODE_ALG_WEP;
else if (strcmp(crypt->ops->name, "TKIP"))
ext->alg = IW_ENCODE_ALG_TKIP;
@@ -711,7 +711,7 @@ int ieee80211_wx_set_mlme(struct ieee80211_device *ieee,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
- struct iw_mlme *mlme = (struct iw_mlme *) extra;
+ struct iw_mlme *mlme = (struct iw_mlme *)extra;
switch (mlme->cmd) {
case IW_MLME_DEAUTH:
case IW_MLME_DISASSOC:
@@ -764,7 +764,7 @@ int ieee80211_wx_set_auth(struct ieee80211_device *ieee,
break;
case IW_AUTH_WPA_ENABLED:
- ieee->wpa_enabled = (data->value)?1:0;
+ ieee->wpa_enabled = (data->value) ? 1 : 0;
break;
case IW_AUTH_RX_UNENCRYPTED_EAPOL:
@@ -784,14 +784,14 @@ int ieee80211_wx_set_gen_ie(struct ieee80211_device *ieee, u8 *ie, size_t len)
{
u8 *buf;
- if (len>MAX_WPA_IE_LEN || (len && !ie)) {
+ if (len > MAX_WPA_IE_LEN || (len && !ie)) {
// printk("return error out, len:%d\n", len);
return -EINVAL;
}
if (len) {
- if (len != ie[1]+2) {
+ if (len != ie[1] + 2) {
printk("len:%zu, ie:%d\n", len, ie[1]);
return -EINVAL;
}
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c
index 53869b3c985c..379a2ccf4d9f 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_BAProc.c
@@ -162,7 +162,7 @@ static struct sk_buff *ieee80211_ADDBA(struct ieee80211_device *ieee, u8 *Dst, s
tag += 2;
}
- IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_BA, skb->data, skb->len);
+ IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_BA, skb->data, skb->len);
return skb;
//return NULL;
}
@@ -229,7 +229,7 @@ static struct sk_buff *ieee80211_DELBA(
put_unaligned_le16(ReasonCode, tag);
tag += 2;
- IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_BA, skb->data, skb->len);
+ IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_BA, skb->data, skb->len);
if (net_ratelimit())
IEEE80211_DEBUG(IEEE80211_DL_TRACE | IEEE80211_DL_BA,
"<=====%s()\n", __func__);
@@ -331,9 +331,9 @@ int ieee80211_rx_ADDBAReq(struct ieee80211_device *ieee, struct sk_buff *skb)
return -1;
}
- IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_BA, skb->data, skb->len);
+ IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_BA, skb->data, skb->len);
- req = (struct rtl_80211_hdr_3addr *) skb->data;
+ req = (struct rtl_80211_hdr_3addr *)skb->data;
tag = (u8 *)req;
dst = &req->addr2[0];
tag += sizeof(struct rtl_80211_hdr_3addr);
@@ -556,7 +556,7 @@ int ieee80211_rx_DELBA(struct ieee80211_device *ieee, struct sk_buff *skb)
return -1;
}
- IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA|IEEE80211_DL_BA, skb->data, skb->len);
+ IEEE80211_DEBUG_DATA(IEEE80211_DL_DATA | IEEE80211_DL_BA, skb->data, skb->len);
delba = (struct rtl_80211_hdr_3addr *)skb->data;
dst = &delba->addr2[0];
pDelBaParamSet = (union delba_param_set *)&delba->payload[2];
@@ -643,7 +643,7 @@ TsInitDelBA(struct ieee80211_device *ieee, struct ts_common_info *pTsCommonInfo,
ieee80211_send_DELBA(
ieee,
pTsCommonInfo->addr,
- (pTxTs->tx_admitted_ba_record.valid)?(&pTxTs->tx_admitted_ba_record):(&pTxTs->tx_pending_ba_record),
+ (pTxTs->tx_admitted_ba_record.valid) ? (&pTxTs->tx_admitted_ba_record) : (&pTxTs->tx_pending_ba_record),
TxRxSelect,
DELBA_REASON_END_BA);
} else if (TxRxSelect == RX_DIR) {
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
index 586d93720e37..79346a00af09 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
@@ -270,7 +270,7 @@ typedef enum _HT_AGGRE_SIZE {
HT_AGG_SIZE_16K = 1,
HT_AGG_SIZE_32K = 2,
HT_AGG_SIZE_64K = 3,
-}HT_AGGRE_SIZE_E, *PHT_AGGRE_SIZE_E;
+} HT_AGGRE_SIZE_E, *PHT_AGGRE_SIZE_E;
/* Indicate different AP vendor for IOT issue */
typedef enum _HT_IOT_PEER {
@@ -281,7 +281,7 @@ typedef enum _HT_IOT_PEER {
HT_IOT_PEER_ATHEROS = 4,
HT_IOT_PEER_CISCO = 5,
HT_IOT_PEER_MAX = 6
-}HT_IOT_PEER_E, *PHTIOT_PEER_E;
+} HT_IOT_PEER_E, *PHTIOT_PEER_E;
/*
* IOT Action for different AP
@@ -297,6 +297,6 @@ typedef enum _HT_IOT_ACTION {
HT_IOT_ACT_CDD_FSYNC = 0x00000080,
HT_IOT_ACT_PURE_N_MODE = 0x00000100,
HT_IOT_ACT_FORCED_CTS2SELF = 0x00000200,
-}HT_IOT_ACTION_E, *PHT_IOT_ACTION_E;
+} HT_IOT_ACTION_E, *PHT_IOT_ACTION_E;
#endif //_RTL819XU_HTTYPE_H_
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
index 59d179ae7ad2..f4e5aa07421f 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_TSProc.c
@@ -105,7 +105,7 @@ static void ResetTsCommonInfo(struct ts_common_info *pTsCommonInfo)
{
eth_zero_addr(pTsCommonInfo->addr);
memset(&pTsCommonInfo->t_spec, 0, sizeof(struct tspec_body));
- memset(&pTsCommonInfo->t_class, 0, sizeof(union qos_tclas)*TCLAS_NUM);
+ memset(&pTsCommonInfo->t_class, 0, sizeof(union qos_tclas) * TCLAS_NUM);
pTsCommonInfo->t_clas_proc = 0;
pTsCommonInfo->t_clas_num = 0;
}
@@ -183,9 +183,9 @@ void TSInitialize(struct ieee80211_device *ieee)
//#ifdef TO_DO_LIST
for (count = 0; count < REORDER_ENTRY_NUM; count++) {
list_add_tail(&pRxReorderEntry->List, &ieee->RxReorder_Unused_List);
- if (count == (REORDER_ENTRY_NUM-1))
+ if (count == (REORDER_ENTRY_NUM - 1))
break;
- pRxReorderEntry = &ieee->RxReorderEntry[count+1];
+ pRxReorderEntry = &ieee->RxReorderEntry[count + 1];
}
//#endif
}
@@ -259,7 +259,7 @@ static struct ts_common_info *SearchAdmitTRStream(struct ieee80211_device *ieee,
}
if (&pRet->list != psearch_list)
- return pRet ;
+ return pRet;
else
return NULL;
}
@@ -367,8 +367,8 @@ bool GetTs(
(&ieee->Rx_TS_Admit_List);
enum direction_value Dir = (ieee->iw_mode == IW_MODE_MASTER) ?
- ((TxRxSelect == TX_DIR)?DIR_DOWN:DIR_UP) :
- ((TxRxSelect == TX_DIR)?DIR_UP:DIR_DOWN);
+ ((TxRxSelect == TX_DIR) ? DIR_DOWN : DIR_UP) :
+ ((TxRxSelect == TX_DIR) ? DIR_UP : DIR_DOWN);
IEEE80211_DEBUG(IEEE80211_DL_TS, "to add Ts\n");
if (!list_empty(pUnusedList)) {
(*ppTS) = list_entry(pUnusedList->next, struct ts_common_info, list);
@@ -530,7 +530,7 @@ void TsStartAddBaProcess(struct ieee80211_device *ieee, struct tx_ts_record *pTx
jiffies + msecs_to_jiffies(TS_ADDBA_DELAY));
} else {
IEEE80211_DEBUG(IEEE80211_DL_BA, "%s: Immediately Start ADDBA now!!\n", __func__);
- mod_timer(&pTxTS->ts_add_ba_timer, jiffies+10); //set 10 ticks
+ mod_timer(&pTxTS->ts_add_ba_timer, jiffies + 10); //set 10 ticks
}
} else {
IEEE80211_DEBUG(IEEE80211_DL_ERR, "%s()==>BA timer is already added\n", __func__);
--
2.22.0
Several macros display unaligned, due to mixes of tabs and spaces. These
can be fixed by making spacing consistent, do this.
Signed-off-by: Stephen Brennan <[email protected]>
---
.../staging/rtl8192u/ieee80211/ieee80211.h | 35 ++++++++++---------
.../staging/rtl8192u/ieee80211/rtl819x_HT.h | 8 ++---
2 files changed, 22 insertions(+), 21 deletions(-)
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
index 129dcb5a0f2e..6b7828a9e71d 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
@@ -169,9 +169,9 @@ struct cb_desc {
#define MGN_MCS14 0x8e
#define MGN_MCS15 0x8f
-#define aSifsTime ((priv->ieee80211->current_network.mode == IEEE_A || \
+#define aSifsTime ((priv->ieee80211->current_network.mode == IEEE_A || \
priv->ieee80211->current_network.mode == IEEE_N_24G || \
- priv->ieee80211->current_network.mode == IEEE_N_5G) ? \
+ priv->ieee80211->current_network.mode == IEEE_N_5G) ? \
16 : 10)
#define MGMT_QUEUE_NUM 5
@@ -387,7 +387,7 @@ struct ieee_param {
#define IEEE80211_STYPE_ACK 0x00D0
#define IEEE80211_STYPE_CFEND 0x00E0
#define IEEE80211_STYPE_CFENDACK 0x00F0
-#define IEEE80211_STYPE_BLOCKACK 0x0094
+#define IEEE80211_STYPE_BLOCKACK 0x0094
/* data */
#define IEEE80211_STYPE_DATA 0x0000
@@ -452,18 +452,19 @@ do { if (ieee80211_debug_level & (level)) \
printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0)
//wb added to debug out data buf
//if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
-#define IEEE80211_DEBUG_DATA(level, data, datalen) \
- do { if ((ieee80211_debug_level & (level)) == (level)) \
- { \
- int i; \
- u8 *pdata = (u8 *) data; \
- printk(KERN_DEBUG "ieee80211: %s()\n", __func__); \
- for (i = 0; i < (int)(datalen); i++) { \
- printk("%2x ", pdata[i]); \
- if ((i + 1) % 16 == 0) printk("\n"); \
- } \
- printk("\n"); \
- } \
+#define IEEE80211_DEBUG_DATA(level, data, datalen) \
+ do { if ((ieee80211_debug_level & (level)) == (level)) \
+ { \
+ int i; \
+ u8 *pdata = (u8 *) data; \
+ printk(KERN_DEBUG "ieee80211: %s()\n", __func__); \
+ for (i = 0; i < (int)(datalen); i++) { \
+ printk("%2x ", pdata[i]); \
+ if ((i + 1) % 16 == 0) \
+ printk("\n"); \
+ } \
+ printk("\n"); \
+ } \
} while (0)
#else
#define IEEE80211_DEBUG (level, fmt, args...) do {} while (0)
@@ -2014,8 +2015,8 @@ struct ieee80211_device {
#define IEEE_A (1<<0)
#define IEEE_B (1<<1)
#define IEEE_G (1<<2)
-#define IEEE_N_24G (1<<4)
-#define IEEE_N_5G (1<<5)
+#define IEEE_N_24G (1<<4)
+#define IEEE_N_5G (1<<5)
#define IEEE_MODE_MASK (IEEE_A | IEEE_B | IEEE_G)
/* Generate a 802.11 header */
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
index 3fca0d3a1d05..586d93720e37 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_HT.h
@@ -253,10 +253,10 @@ extern u8 MCS_FILTER_1SS[16];
/* 2007/07/12 MH We only define legacy and HT wireless mode now. */
#define LEGACY_WIRELESS_MODE IEEE_MODE_MASK
-#define CURRENT_RATE(WirelessMode, LegacyRate, HTRate) \
- ((WirelessMode & (LEGACY_WIRELESS_MODE)) != 0) ?\
- (LegacyRate) :\
- (PICK_RATE(LegacyRate, HTRate))
+#define CURRENT_RATE(WirelessMode, LegacyRate, HTRate) \
+ ((WirelessMode & (LEGACY_WIRELESS_MODE)) != 0) ? \
+ (LegacyRate) : \
+ (PICK_RATE(LegacyRate, HTRate))
// MCS Bw 40 {1~7, 12~15,32}
#define RATE_ADPT_1SS_MASK 0xFF
--
2.22.0
On Wed, 2019-08-21 at 07:35 -0700, Stephen Brennan wrote:
> Several macros display unaligned, due to mixes of tabs and spaces. These
> can be fixed by making spacing consistent, do this.
[]
> @@ -452,18 +452,19 @@ do { if (ieee80211_debug_level & (level)) \
> printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0)
> //wb added to debug out data buf
> //if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
> -#define IEEE80211_DEBUG_DATA(level, data, datalen) \
> - do { if ((ieee80211_debug_level & (level)) == (level)) \
> - { \
> - int i; \
> - u8 *pdata = (u8 *) data; \
> - printk(KERN_DEBUG "ieee80211: %s()\n", __func__); \
> - for (i = 0; i < (int)(datalen); i++) { \
> - printk("%2x ", pdata[i]); \
> - if ((i + 1) % 16 == 0) printk("\n"); \
> - } \
> - printk("\n"); \
> - } \
> +#define IEEE80211_DEBUG_DATA(level, data, datalen) \
> + do { if ((ieee80211_debug_level & (level)) == (level)) \
> + { \
> + int i; \
> + u8 *pdata = (u8 *) data; \
> + printk(KERN_DEBUG "ieee80211: %s()\n", __func__); \
> + for (i = 0; i < (int)(datalen); i++) { \
> + printk("%2x ", pdata[i]); \
> + if ((i + 1) % 16 == 0) \
> + printk("\n"); \
> + } \
> + printk("\n"); \
without pr_cont/KERN_CONT, this will output a terrible mess.
It's probably better to use print_hex_dump_debug