memory returned as part of nvmem_read via qfprom_read should be
freed by the consumer once done.
Existing code is not doing it so fix it.
Below memory leak detected by kmemleak
[<ffffff80088b7658>] kmemleak_alloc+0x50/0x84
[<ffffff80081df120>] __kmalloc+0xe8/0x168
[<ffffff80086db350>] nvmem_cell_read+0x30/0x80
[<ffffff8008632790>] qfprom_read+0x4c/0x7c
[<ffffff80086335a4>] calibrate_v1+0x34/0x204
[<ffffff8008632518>] tsens_probe+0x164/0x258
[<ffffff80084e0a1c>] platform_drv_probe+0x80/0xa0
[<ffffff80084de4f4>] really_probe+0x208/0x248
[<ffffff80084de2c4>] driver_probe_device+0x98/0xc0
[<ffffff80084dec54>] __device_attach_driver+0x9c/0xac
[<ffffff80084dca74>] bus_for_each_drv+0x60/0x8c
[<ffffff80084de634>] __device_attach+0x8c/0x100
[<ffffff80084de6c8>] device_initial_probe+0x20/0x28
[<ffffff80084dcbb8>] bus_probe_device+0x34/0x7c
[<ffffff80084deb08>] deferred_probe_work_func+0x6c/0x98
[<ffffff80080c3da8>] process_one_work+0x160/0x2f8
Signed-off-by: Srinivas Kandagatla <[email protected]>
---
drivers/thermal/qcom/tsens-8960.c | 2 ++
drivers/thermal/qcom/tsens-v0_1.c | 12 ++++++++++--
drivers/thermal/qcom/tsens-v1.c | 1 +
drivers/thermal/qcom/tsens.h | 1 +
4 files changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
index 8d9b721dadb6..e46a4e3f25c4 100644
--- a/drivers/thermal/qcom/tsens-8960.c
+++ b/drivers/thermal/qcom/tsens-8960.c
@@ -229,6 +229,8 @@ static int calibrate_8960(struct tsens_priv *priv)
for (i = 0; i < num_read; i++, s++)
s->offset = data[i];
+ kfree(data);
+
return 0;
}
diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
index 6f26fadf4c27..055647bcee67 100644
--- a/drivers/thermal/qcom/tsens-v0_1.c
+++ b/drivers/thermal/qcom/tsens-v0_1.c
@@ -145,8 +145,10 @@ static int calibrate_8916(struct tsens_priv *priv)
return PTR_ERR(qfprom_cdata);
qfprom_csel = (u32 *)qfprom_read(priv->dev, "calib_sel");
- if (IS_ERR(qfprom_csel))
+ if (IS_ERR(qfprom_csel)) {
+ kfree(qfprom_cdata);
return PTR_ERR(qfprom_csel);
+ }
mode = (qfprom_csel[0] & MSM8916_CAL_SEL_MASK) >> MSM8916_CAL_SEL_SHIFT;
dev_dbg(priv->dev, "calibration mode is %d\n", mode);
@@ -181,6 +183,8 @@ static int calibrate_8916(struct tsens_priv *priv)
}
compute_intercept_slope(priv, p1, p2, mode);
+ kfree(qfprom_cdata);
+ kfree(qfprom_csel);
return 0;
}
@@ -198,8 +202,10 @@ static int calibrate_8974(struct tsens_priv *priv)
return PTR_ERR(calib);
bkp = (u32 *)qfprom_read(priv->dev, "calib_backup");
- if (IS_ERR(bkp))
+ if (IS_ERR(bkp)) {
+ kfree(calib);
return PTR_ERR(bkp);
+ }
calib_redun_sel = bkp[1] & BKP_REDUN_SEL;
calib_redun_sel >>= BKP_REDUN_SHIFT;
@@ -313,6 +319,8 @@ static int calibrate_8974(struct tsens_priv *priv)
}
compute_intercept_slope(priv, p1, p2, mode);
+ kfree(calib);
+ kfree(bkp);
return 0;
}
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index 10b595d4f619..870f502f2cb6 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -138,6 +138,7 @@ static int calibrate_v1(struct tsens_priv *priv)
}
compute_intercept_slope(priv, p1, p2, mode);
+ kfree(qfprom_cdata);
return 0;
}
diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
index 2fd94997245b..b89083b61c38 100644
--- a/drivers/thermal/qcom/tsens.h
+++ b/drivers/thermal/qcom/tsens.h
@@ -17,6 +17,7 @@
#include <linux/thermal.h>
#include <linux/regmap.h>
+#include <linux/slab.h>
struct tsens_priv;
--
2.21.0
On Fri, Aug 23, 2019 at 3:08 PM Srinivas Kandagatla
<[email protected]> wrote:
>
> memory returned as part of nvmem_read via qfprom_read should be
> freed by the consumer once done.
> Existing code is not doing it so fix it.
>
> Below memory leak detected by kmemleak
> [<ffffff80088b7658>] kmemleak_alloc+0x50/0x84
> [<ffffff80081df120>] __kmalloc+0xe8/0x168
> [<ffffff80086db350>] nvmem_cell_read+0x30/0x80
> [<ffffff8008632790>] qfprom_read+0x4c/0x7c
> [<ffffff80086335a4>] calibrate_v1+0x34/0x204
> [<ffffff8008632518>] tsens_probe+0x164/0x258
> [<ffffff80084e0a1c>] platform_drv_probe+0x80/0xa0
> [<ffffff80084de4f4>] really_probe+0x208/0x248
> [<ffffff80084de2c4>] driver_probe_device+0x98/0xc0
> [<ffffff80084dec54>] __device_attach_driver+0x9c/0xac
> [<ffffff80084dca74>] bus_for_each_drv+0x60/0x8c
> [<ffffff80084de634>] __device_attach+0x8c/0x100
> [<ffffff80084de6c8>] device_initial_probe+0x20/0x28
> [<ffffff80084dcbb8>] bus_probe_device+0x34/0x7c
> [<ffffff80084deb08>] deferred_probe_work_func+0x6c/0x98
> [<ffffff80080c3da8>] process_one_work+0x160/0x2f8
>
> Signed-off-by: Srinivas Kandagatla <[email protected]>
Acked-by: Amit Kucheria <[email protected]>
> ---
> drivers/thermal/qcom/tsens-8960.c | 2 ++
> drivers/thermal/qcom/tsens-v0_1.c | 12 ++++++++++--
> drivers/thermal/qcom/tsens-v1.c | 1 +
> drivers/thermal/qcom/tsens.h | 1 +
> 4 files changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c
> index 8d9b721dadb6..e46a4e3f25c4 100644
> --- a/drivers/thermal/qcom/tsens-8960.c
> +++ b/drivers/thermal/qcom/tsens-8960.c
> @@ -229,6 +229,8 @@ static int calibrate_8960(struct tsens_priv *priv)
> for (i = 0; i < num_read; i++, s++)
> s->offset = data[i];
>
> + kfree(data);
> +
> return 0;
> }
>
> diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c
> index 6f26fadf4c27..055647bcee67 100644
> --- a/drivers/thermal/qcom/tsens-v0_1.c
> +++ b/drivers/thermal/qcom/tsens-v0_1.c
> @@ -145,8 +145,10 @@ static int calibrate_8916(struct tsens_priv *priv)
> return PTR_ERR(qfprom_cdata);
>
> qfprom_csel = (u32 *)qfprom_read(priv->dev, "calib_sel");
> - if (IS_ERR(qfprom_csel))
> + if (IS_ERR(qfprom_csel)) {
> + kfree(qfprom_cdata);
> return PTR_ERR(qfprom_csel);
> + }
>
> mode = (qfprom_csel[0] & MSM8916_CAL_SEL_MASK) >> MSM8916_CAL_SEL_SHIFT;
> dev_dbg(priv->dev, "calibration mode is %d\n", mode);
> @@ -181,6 +183,8 @@ static int calibrate_8916(struct tsens_priv *priv)
> }
>
> compute_intercept_slope(priv, p1, p2, mode);
> + kfree(qfprom_cdata);
> + kfree(qfprom_csel);
>
> return 0;
> }
> @@ -198,8 +202,10 @@ static int calibrate_8974(struct tsens_priv *priv)
> return PTR_ERR(calib);
>
> bkp = (u32 *)qfprom_read(priv->dev, "calib_backup");
> - if (IS_ERR(bkp))
> + if (IS_ERR(bkp)) {
> + kfree(calib);
> return PTR_ERR(bkp);
> + }
>
> calib_redun_sel = bkp[1] & BKP_REDUN_SEL;
> calib_redun_sel >>= BKP_REDUN_SHIFT;
> @@ -313,6 +319,8 @@ static int calibrate_8974(struct tsens_priv *priv)
> }
>
> compute_intercept_slope(priv, p1, p2, mode);
> + kfree(calib);
> + kfree(bkp);
>
> return 0;
> }
> diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
> index 10b595d4f619..870f502f2cb6 100644
> --- a/drivers/thermal/qcom/tsens-v1.c
> +++ b/drivers/thermal/qcom/tsens-v1.c
> @@ -138,6 +138,7 @@ static int calibrate_v1(struct tsens_priv *priv)
> }
>
> compute_intercept_slope(priv, p1, p2, mode);
> + kfree(qfprom_cdata);
>
> return 0;
> }
> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
> index 2fd94997245b..b89083b61c38 100644
> --- a/drivers/thermal/qcom/tsens.h
> +++ b/drivers/thermal/qcom/tsens.h
> @@ -17,6 +17,7 @@
>
> #include <linux/thermal.h>
> #include <linux/regmap.h>
> +#include <linux/slab.h>
>
> struct tsens_priv;
>
> --
> 2.21.0
>
On Fri, 2019-08-23 at 17:29 +0530, Amit Kucheria wrote:
> On Fri, Aug 23, 2019 at 3:08 PM Srinivas Kandagatla
> <[email protected]> wrote:
> >
> > memory returned as part of nvmem_read via qfprom_read should be
> > freed by the consumer once done.
> > Existing code is not doing it so fix it.
> >
> > Below memory leak detected by kmemleak
> > [<ffffff80088b7658>] kmemleak_alloc+0x50/0x84
> > [<ffffff80081df120>] __kmalloc+0xe8/0x168
> > [<ffffff80086db350>] nvmem_cell_read+0x30/0x80
> > [<ffffff8008632790>] qfprom_read+0x4c/0x7c
> > [<ffffff80086335a4>] calibrate_v1+0x34/0x204
> > [<ffffff8008632518>] tsens_probe+0x164/0x258
> > [<ffffff80084e0a1c>] platform_drv_probe+0x80/0xa0
> > [<ffffff80084de4f4>] really_probe+0x208/0x248
> > [<ffffff80084de2c4>] driver_probe_device+0x98/0xc0
> > [<ffffff80084dec54>] __device_attach_driver+0x9c/0xac
> > [<ffffff80084dca74>] bus_for_each_drv+0x60/0x8c
> > [<ffffff80084de634>] __device_attach+0x8c/0x100
> > [<ffffff80084de6c8>] device_initial_probe+0x20/0x28
> > [<ffffff80084dcbb8>] bus_probe_device+0x34/0x7c
> > [<ffffff80084deb08>] deferred_probe_work_func+0x6c/0x98
> > [<ffffff80080c3da8>] process_one_work+0x160/0x2f8
> >
> > Signed-off-by: Srinivas Kandagatla <[email protected]>
>
> Acked-by: Amit Kucheria <[email protected]>
patch applied.
thanks,
rui
>
> > ---
> > drivers/thermal/qcom/tsens-8960.c | 2 ++
> > drivers/thermal/qcom/tsens-v0_1.c | 12 ++++++++++--
> > drivers/thermal/qcom/tsens-v1.c | 1 +
> > drivers/thermal/qcom/tsens.h | 1 +
> > 4 files changed, 14 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/thermal/qcom/tsens-8960.c
> > b/drivers/thermal/qcom/tsens-8960.c
> > index 8d9b721dadb6..e46a4e3f25c4 100644
> > --- a/drivers/thermal/qcom/tsens-8960.c
> > +++ b/drivers/thermal/qcom/tsens-8960.c
> > @@ -229,6 +229,8 @@ static int calibrate_8960(struct tsens_priv
> > *priv)
> > for (i = 0; i < num_read; i++, s++)
> > s->offset = data[i];
> >
> > + kfree(data);
> > +
> > return 0;
> > }
> >
> > diff --git a/drivers/thermal/qcom/tsens-v0_1.c
> > b/drivers/thermal/qcom/tsens-v0_1.c
> > index 6f26fadf4c27..055647bcee67 100644
> > --- a/drivers/thermal/qcom/tsens-v0_1.c
> > +++ b/drivers/thermal/qcom/tsens-v0_1.c
> > @@ -145,8 +145,10 @@ static int calibrate_8916(struct tsens_priv
> > *priv)
> > return PTR_ERR(qfprom_cdata);
> >
> > qfprom_csel = (u32 *)qfprom_read(priv->dev, "calib_sel");
> > - if (IS_ERR(qfprom_csel))
> > + if (IS_ERR(qfprom_csel)) {
> > + kfree(qfprom_cdata);
> > return PTR_ERR(qfprom_csel);
> > + }
> >
> > mode = (qfprom_csel[0] & MSM8916_CAL_SEL_MASK) >>
> > MSM8916_CAL_SEL_SHIFT;
> > dev_dbg(priv->dev, "calibration mode is %d\n", mode);
> > @@ -181,6 +183,8 @@ static int calibrate_8916(struct tsens_priv
> > *priv)
> > }
> >
> > compute_intercept_slope(priv, p1, p2, mode);
> > + kfree(qfprom_cdata);
> > + kfree(qfprom_csel);
> >
> > return 0;
> > }
> > @@ -198,8 +202,10 @@ static int calibrate_8974(struct tsens_priv
> > *priv)
> > return PTR_ERR(calib);
> >
> > bkp = (u32 *)qfprom_read(priv->dev, "calib_backup");
> > - if (IS_ERR(bkp))
> > + if (IS_ERR(bkp)) {
> > + kfree(calib);
> > return PTR_ERR(bkp);
> > + }
> >
> > calib_redun_sel = bkp[1] & BKP_REDUN_SEL;
> > calib_redun_sel >>= BKP_REDUN_SHIFT;
> > @@ -313,6 +319,8 @@ static int calibrate_8974(struct tsens_priv
> > *priv)
> > }
> >
> > compute_intercept_slope(priv, p1, p2, mode);
> > + kfree(calib);
> > + kfree(bkp);
> >
> > return 0;
> > }
> > diff --git a/drivers/thermal/qcom/tsens-v1.c
> > b/drivers/thermal/qcom/tsens-v1.c
> > index 10b595d4f619..870f502f2cb6 100644
> > --- a/drivers/thermal/qcom/tsens-v1.c
> > +++ b/drivers/thermal/qcom/tsens-v1.c
> > @@ -138,6 +138,7 @@ static int calibrate_v1(struct tsens_priv
> > *priv)
> > }
> >
> > compute_intercept_slope(priv, p1, p2, mode);
> > + kfree(qfprom_cdata);
> >
> > return 0;
> > }
> > diff --git a/drivers/thermal/qcom/tsens.h
> > b/drivers/thermal/qcom/tsens.h
> > index 2fd94997245b..b89083b61c38 100644
> > --- a/drivers/thermal/qcom/tsens.h
> > +++ b/drivers/thermal/qcom/tsens.h
> > @@ -17,6 +17,7 @@
> >
> > #include <linux/thermal.h>
> > #include <linux/regmap.h>
> > +#include <linux/slab.h>
> >
> > struct tsens_priv;
> >
> > --
> > 2.21.0
> >