2019-09-05 01:36:49

by Rashmica Gupta

Subject: [PATCH v2 1/4] gpio/aspeed: Fix incorrect number of banks

The current calculation for the number of GPIO banks is only correct if
the number of GPIOs is a multiple of 32 (if there were 31 GPIOs we would
currently say there are 0 banks, which is incorrect).

Fixes: 361b79119a4b7 ('gpio: Add Aspeed driver')

Signed-off-by: Rashmica Gupta <[email protected]>
---
drivers/gpio/gpio-aspeed.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index 9defe25d4721..b83e23aecd18 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -1165,7 +1165,7 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
gpio->chip.base = -1;

/* Allocate a cache of the output registers */
- banks = gpio->config->nr_gpios >> 5;
+ banks = DIV_ROUND_UP(gpio->config->nr_gpios, 32);
gpio->dcache = devm_kcalloc(&pdev->dev,
banks, sizeof(u32), GFP_KERNEL);
if (!gpio->dcache)
--
2.20.1

2019-09-05 03:49:17

by Andrew Jeffery

Subject: Re: [PATCH v2 1/4] gpio/aspeed: Fix incorrect number of banks

On Thu, 5 Sep 2019, at 10:46, Rashmica Gupta wrote:
> The current calculation for the number of GPIO banks is only correct if
> the number of GPIOs is a multiple of 32 (if there were 31 GPIOs we would
> currently say there are 0 banks, which is incorrect).
>
> Fixes: 361b79119a4b7 ('gpio: Add Aspeed driver')
>
> Signed-off-by: Rashmica Gupta <[email protected]>

Reviewed-by: Andrew Jeffery <[email protected]>

> ---
> drivers/gpio/gpio-aspeed.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
> index 9defe25d4721..b83e23aecd18 100644
> --- a/drivers/gpio/gpio-aspeed.c
> +++ b/drivers/gpio/gpio-aspeed.c
> @@ -1165,7 +1165,7 @@ static int __init aspeed_gpio_probe(struct
> platform_device *pdev)
> gpio->chip.base = -1;
>
> /* Allocate a cache of the output registers */
> - banks = gpio->config->nr_gpios >> 5;
> + banks = DIV_ROUND_UP(gpio->config->nr_gpios, 32);
> gpio->dcache = devm_kcalloc(&pdev->dev,
> banks, sizeof(u32), GFP_KERNEL);
> if (!gpio->dcache)
> --
> 2.20.1
>
>

2019-09-10 22:09:22

by Vijay Khemka

Subject: Re: [PATCH v2 1/4] gpio/aspeed: Fix incorrect number of banks

On 9/4/19, 6:17 PM, "Linux-aspeed on behalf of Rashmica Gupta" <[email protected] on behalf of [email protected]> wrote:

The current calculation for the number of GPIO banks is only correct if
the number of GPIOs is a multiple of 32 (if there were 31 GPIOs we would
currently say there are 0 banks, which is incorrect).

Fixes: 361b79119a4b7 ('gpio: Add Aspeed driver')

Signed-off-by: Rashmica Gupta <[email protected]>
Reviewed-by: Vijay Khemka <[email protected]>
---
drivers/gpio/gpio-aspeed.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c
index 9defe25d4721..b83e23aecd18 100644
--- a/drivers/gpio/gpio-aspeed.c
+++ b/drivers/gpio/gpio-aspeed.c
@@ -1165,7 +1165,7 @@ static int __init aspeed_gpio_probe(struct platform_device *pdev)
gpio->chip.base = -1;

/* Allocate a cache of the output registers */
- banks = gpio->config->nr_gpios >> 5;
+ banks = DIV_ROUND_UP(gpio->config->nr_gpios, 32);
Good catch
gpio->dcache = devm_kcalloc(&pdev->dev,
banks, sizeof(u32), GFP_KERNEL);
if (!gpio->dcache)
--
2.20.1