From: Josef Friedl <[email protected]>
add missing devicetree-binding document for mt6397 rtc
in later patch driver is extended with mt6323 chip
Suggested-By: Alexandre Belloni <[email protected]>
Signed-off-by: Josef Friedl <[email protected]>
Signed-off-by: Frank Wunderlich <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
changes since v6: none
changes since v5: none
changes since v4: use relative path
changes since v3: moved SOB
changes since v2: splitted rtc-mt6397.txt from first patch
---
.../devicetree/bindings/rtc/rtc-mt6397.txt | 29 +++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
new file mode 100644
index 000000000000..55a0c8874c03
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mt6397.txt
@@ -0,0 +1,29 @@
+Device-Tree bindings for MediaTek PMIC based RTC
+
+MediaTek PMIC based RTC is an independent function of MediaTek PMIC that works
+as a type of multi-function device (MFD). The RTC can be configured and set up
+with PMIC wrapper bus which is a common resource shared with the other
+functions found on the same PMIC.
+
+For MediaTek PMIC MFD bindings, see:
+../mfd/mt6397.txt
+
+For MediaTek PMIC wrapper bus bindings, see:
+../soc/mediatek/pwrap.txt
+
+Required properties:
+- compatible: Should be one of follows
+ "mediatek,mt6323-rtc": for MT6323 PMIC
+ "mediatek,mt6397-rtc": for MT6397 PMIC
+
+Example:
+
+ pmic {
+ compatible = "mediatek,mt6323";
+
+ ...
+
+ rtc {
+ compatible = "mediatek,mt6323-rtc";
+ };
+ };
--
2.17.1