Changes since v4:
- add auo,b101uan08.3 panel for this driver.
- add boe,tv101wum-n53 panel for this driver.
Changes since v3:
- remove check enable_gpio.
- fine tune the auo,kd101n80-45na panel's power on timing.
Changes since v2:
- correct the panel size
- remove blank line in Kconfig
- move auo,kd101n80-45na panel driver in this series.
Changes since v1:
- update typo nl6 -> n16.
- update new panel config and makefile are added in alphabetically order.
- add the panel mode and panel info in driver data.
- merge auo,kd101n80-45a and boe,tv101wum-nl6 in one driver
Jitao Shi (8):
dt-bindings: display: panel: Add BOE tv101wum-n16 panel bindings
drm/panel: support for BOE tv101wum-nl6 wuxga dsi video mode panel
dt-bindings: display: panel: add auo kd101n80-45na panel bindings
drm/panel: support for auo,kd101n80-45na wuxga dsi video mode panel
dt-bindings: display: panel: add boe tv101wum-n53 panel documentation
drm/panel: support for boe,tv101wum-n53 wuxga dsi video mode panel
dt-bindings: display: panel: add AUO auo,b101uan08.3 panel
documentation
drm/panel: support for auo,b101uan08.3 wuxga dsi video mode panel
.../display/panel/auo,b101uan08.3.txt | 34 +
.../display/panel/auo,kd101n80-45na.txt | 34 +
.../display/panel/boe,tv101wum-n53.txt | 34 +
.../display/panel/boe,tv101wum-nl6.txt | 34 +
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 876 ++++++++++++++++++
7 files changed, 1022 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt
create mode 100644 Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-n53.txt
create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
--
2.21.0
Add dcumentation for boe,tv101wum-n53, which is mipi dsi video panel
and resolution is 1200x1920.
Signed-off-by: Jitao Shi <[email protected]>
---
.../display/panel/boe,tv101wum-n53.txt | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-n53.txt
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-n53.txt b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-n53.txt
new file mode 100644
index 000000000000..145a0b2a80a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-n53.txt
@@ -0,0 +1,34 @@
+BOE Corporation 10.1" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "boe,tv101wum-n53"
+- reg: the virtual channel number of a DSI peripheral
+- enable-gpios: a GPIO spec for the enable pin
+- pp1800-supply: core voltage supply
+- avdd-supply: phandle of the regulator that provides positive voltage
+- avee-supply: phandle of the regulator that provides negative voltage
+- backlight: phandle of the backlight device attached to the panel
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in
+media/video-interfaces.txt. This node should describe panel's video bus.
+
+Example:
+&dsi {
+ ...
+ panel@0 {
+ compatible = "boe,tv101wum-n53";
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ status = "okay";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
--
2.21.0
Add documentation for auo kd101n80-45na panel.
Signed-off-by: Jitao Shi <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
---
.../display/panel/auo,kd101n80-45na.txt | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
diff --git a/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
new file mode 100644
index 000000000000..994c2a13f942
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,kd101n80-45na.txt
@@ -0,0 +1,34 @@
+AUO Corporation 10.1" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,kd101n80-45na"
+- reg: the virtual channel number of a DSI peripheral
+- enable-gpios: a GPIO spec for the enable pin
+- pp1800-supply: core voltage supply
+- avdd-supply: phandle of the regulator that provides positive voltage
+- avee-supply: phandle of the regulator that provides negative voltage
+- backlight: phandle of the backlight device attached to the panel
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in
+media/video-interfaces.txt. This node should describe panel's video bus.
+
+Example:
+&dsi {
+ ...
+ panel@0 {
+ compatible = "auo,kd101n80-45na";
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ status = "okay";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
--
2.21.0
Add documentation for boe tv101wum-n16 panel.
Signed-off-by: Jitao Shi <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
---
.../display/panel/boe,tv101wum-nl6.txt | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
new file mode 100644
index 000000000000..4746ed153507
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv101wum-nl6.txt
@@ -0,0 +1,34 @@
+Boe Corporation 10.1" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "boe,tv101wum-nl6"
+- reg: the virtual channel number of a DSI peripheral
+- enable-gpios: a gpio spec for the enable pin
+- pp1800-supply: core voltage supply
+- avdd-supply: phandle of the regulator that provides positive voltage
+- avee-supply: phandle of the regulator that provides negative voltage
+- backlight: phandle of the backlight device attached to the panel
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in
+media/video-interfaces.txt. This node should describe panel's video bus.
+
+Example:
+&dsi {
+ ...
+ panel@0 {
+ compatible = "boe,tv101wum-nl6";
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ status = "okay";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
--
2.21.0
Add dcumentation for auo,b101uan08.3, which is mipi dsi video panel
and resolution is 1200x1920.
Signed-off-by: Jitao Shi <[email protected]>
---
.../display/panel/auo,b101uan08.3.txt | 34 +++++++++++++++++++
1 file changed, 34 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt
diff --git a/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt b/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt
new file mode 100644
index 000000000000..7a31cfe534ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt
@@ -0,0 +1,34 @@
+AUO Corporation 10.1" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "auo,b101uan08.3"
+- reg: the virtual channel number of a DSI peripheral
+- enable-gpios: a GPIO spec for the enable pin
+- pp1800-supply: core voltage supply
+- avdd-supply: phandle of the regulator that provides positive voltage
+- avee-supply: phandle of the regulator that provides negative voltage
+- backlight: phandle of the backlight device attached to the panel
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in
+media/video-interfaces.txt. This node should describe panel's video bus.
+
+Example:
+&dsi {
+ ...
+ panel@0 {
+ compatible = "auo,b101uan08.3";
+ reg = <0>;
+ enable-gpios = <&pio 45 0>;
+ avdd-supply = <&ppvarn_lcd>;
+ avee-supply = <&ppvarp_lcd>;
+ pp1800-supply = <&pp1800_lcd>;
+ backlight = <&backlight_lcd0>;
+ status = "okay";
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+ };
+};
--
2.21.0
Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel.
Signed-off-by: Jitao Shi <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
---
drivers/gpu/drm/panel/Kconfig | 9 +
drivers/gpu/drm/panel/Makefile | 1 +
.../gpu/drm/panel/panel-boe-tv101wum-nl6.c | 709 ++++++++++++++++++
3 files changed, 719 insertions(+)
create mode 100644 drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index d9d931aa6e26..afcadb3585fb 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -18,6 +18,15 @@ config DRM_PANEL_ARM_VERSATILE
reference designs. The panel is detected using special registers
in the Versatile family syscon registers.
+config DRM_PANEL_BOE_TV101WUM_NL6
+ tristate "BOE TV101WUM 1200x1920 panel"
+ depends on OF
+ depends on DRM_MIPI_DSI
+ depends on BACKLIGHT_CLASS_DEVICE
+ help
+ Say Y here if you want to support for BOE TV101WUM WUXGA PANEL
+ DSI Video Mode panel
+
config DRM_PANEL_LVDS
tristate "Generic LVDS panel driver"
depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index fb0cb3aaa9e6..bd26b6ac039e 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o
+obj-$(CONFIG_DRM_PANEL_BOE_TV101WUM_NL6) += panel-boe-tv101wum-nl6.o
obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o
diff --git a/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
new file mode 100644
index 000000000000..e27529b80d78
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-boe-tv101wum-nl6.c
@@ -0,0 +1,709 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Jitao Shi <[email protected]>
+ */
+
+#include <linux/backlight.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <drm/drm_crtc.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_panel.h>
+
+#include <video/mipi_display.h>
+
+struct panel_desc {
+ const struct drm_display_mode *modes;
+ unsigned int bpc;
+
+ /**
+ * @width_mm: width of the panel's active display area
+ * @height_mm: height of the panel's active display area
+ */
+ struct {
+ unsigned int width_mm;
+ unsigned int height_mm;
+ } size;
+
+ unsigned long mode_flags;
+ enum mipi_dsi_pixel_format format;
+ const struct panel_init_cmd *init_cmds;
+ unsigned int lanes;
+};
+
+struct boe_panel {
+ struct drm_panel base;
+ struct mipi_dsi_device *dsi;
+
+ const struct panel_desc *desc;
+
+ struct backlight_device *backlight;
+ struct regulator *pp1800;
+ struct regulator *avee;
+ struct regulator *avdd;
+ struct gpio_desc *enable_gpio;
+
+ bool prepared;
+ bool enabled;
+
+ const struct drm_display_mode *mode;
+};
+
+enum dsi_cmd_type {
+ INIT_DCS_CMD,
+ DELAY_CMD,
+};
+
+struct panel_init_cmd {
+ enum dsi_cmd_type type;
+ size_t len;
+ const char *data;
+};
+
+#define _INIT_DCS_CMD(...) { \
+ .type = INIT_DCS_CMD, \
+ .len = sizeof((char[]){__VA_ARGS__}), \
+ .data = (char[]){__VA_ARGS__} }
+
+#define _INIT_DELAY_CMD(...) { \
+ .type = DELAY_CMD,\
+ .len = sizeof((char[]){__VA_ARGS__}), \
+ .data = (char[]){__VA_ARGS__} }
+
+static const struct panel_init_cmd boe_init_cmd[] = {
+ _INIT_DELAY_CMD(24),
+ _INIT_DCS_CMD(0xB0, 0x05),
+ _INIT_DCS_CMD(0xB1, 0xE5),
+ _INIT_DCS_CMD(0xB3, 0x52),
+ _INIT_DCS_CMD(0xB0, 0x00),
+ _INIT_DCS_CMD(0xB3, 0x88),
+ _INIT_DCS_CMD(0xB0, 0x04),
+ _INIT_DCS_CMD(0xB8, 0x00),
+ _INIT_DCS_CMD(0xB0, 0x00),
+ _INIT_DCS_CMD(0xB6, 0x03),
+ _INIT_DCS_CMD(0xBA, 0x8B),
+ _INIT_DCS_CMD(0xBF, 0x1A),
+ _INIT_DCS_CMD(0xC0, 0x0F),
+ _INIT_DCS_CMD(0xC2, 0x0C),
+ _INIT_DCS_CMD(0xC3, 0x02),
+ _INIT_DCS_CMD(0xC4, 0x0C),
+ _INIT_DCS_CMD(0xC5, 0x02),
+ _INIT_DCS_CMD(0xB0, 0x01),
+ _INIT_DCS_CMD(0xE0, 0x26),
+ _INIT_DCS_CMD(0xE1, 0x26),
+ _INIT_DCS_CMD(0xDC, 0x00),
+ _INIT_DCS_CMD(0xDD, 0x00),
+ _INIT_DCS_CMD(0xCC, 0x26),
+ _INIT_DCS_CMD(0xCD, 0x26),
+ _INIT_DCS_CMD(0xC8, 0x00),
+ _INIT_DCS_CMD(0xC9, 0x00),
+ _INIT_DCS_CMD(0xD2, 0x03),
+ _INIT_DCS_CMD(0xD3, 0x03),
+ _INIT_DCS_CMD(0xE6, 0x04),
+ _INIT_DCS_CMD(0xE7, 0x04),
+ _INIT_DCS_CMD(0xC4, 0x09),
+ _INIT_DCS_CMD(0xC5, 0x09),
+ _INIT_DCS_CMD(0xD8, 0x0A),
+ _INIT_DCS_CMD(0xD9, 0x0A),
+ _INIT_DCS_CMD(0xC2, 0x0B),
+ _INIT_DCS_CMD(0xC3, 0x0B),
+ _INIT_DCS_CMD(0xD6, 0x0C),
+ _INIT_DCS_CMD(0xD7, 0x0C),
+ _INIT_DCS_CMD(0xC0, 0x05),
+ _INIT_DCS_CMD(0xC1, 0x05),
+ _INIT_DCS_CMD(0xD4, 0x06),
+ _INIT_DCS_CMD(0xD5, 0x06),
+ _INIT_DCS_CMD(0xCA, 0x07),
+ _INIT_DCS_CMD(0xCB, 0x07),
+ _INIT_DCS_CMD(0xDE, 0x08),
+ _INIT_DCS_CMD(0xDF, 0x08),
+ _INIT_DCS_CMD(0xB0, 0x02),
+ _INIT_DCS_CMD(0xC0, 0x00),
+ _INIT_DCS_CMD(0xC1, 0x0D),
+ _INIT_DCS_CMD(0xC2, 0x17),
+ _INIT_DCS_CMD(0xC3, 0x26),
+ _INIT_DCS_CMD(0xC4, 0x31),
+ _INIT_DCS_CMD(0xC5, 0x1C),
+ _INIT_DCS_CMD(0xC6, 0x2C),
+ _INIT_DCS_CMD(0xC7, 0x33),
+ _INIT_DCS_CMD(0xC8, 0x31),
+ _INIT_DCS_CMD(0xC9, 0x37),
+ _INIT_DCS_CMD(0xCA, 0x37),
+ _INIT_DCS_CMD(0xCB, 0x37),
+ _INIT_DCS_CMD(0xCC, 0x39),
+ _INIT_DCS_CMD(0xCD, 0x2E),
+ _INIT_DCS_CMD(0xCE, 0x2F),
+ _INIT_DCS_CMD(0xCF, 0x2F),
+ _INIT_DCS_CMD(0xD0, 0x07),
+ _INIT_DCS_CMD(0xD2, 0x00),
+ _INIT_DCS_CMD(0xD3, 0x0D),
+ _INIT_DCS_CMD(0xD4, 0x17),
+ _INIT_DCS_CMD(0xD5, 0x26),
+ _INIT_DCS_CMD(0xD6, 0x31),
+ _INIT_DCS_CMD(0xD7, 0x3F),
+ _INIT_DCS_CMD(0xD8, 0x3F),
+ _INIT_DCS_CMD(0xD9, 0x3F),
+ _INIT_DCS_CMD(0xDA, 0x3F),
+ _INIT_DCS_CMD(0xDB, 0x37),
+ _INIT_DCS_CMD(0xDC, 0x37),
+ _INIT_DCS_CMD(0xDD, 0x37),
+ _INIT_DCS_CMD(0xDE, 0x39),
+ _INIT_DCS_CMD(0xDF, 0x2E),
+ _INIT_DCS_CMD(0xE0, 0x2F),
+ _INIT_DCS_CMD(0xE1, 0x2F),
+ _INIT_DCS_CMD(0xE2, 0x07),
+ _INIT_DCS_CMD(0xB0, 0x03),
+ _INIT_DCS_CMD(0xC8, 0x0B),
+ _INIT_DCS_CMD(0xC9, 0x07),
+ _INIT_DCS_CMD(0xC3, 0x00),
+ _INIT_DCS_CMD(0xE7, 0x00),
+ _INIT_DCS_CMD(0xC5, 0x2A),
+ _INIT_DCS_CMD(0xDE, 0x2A),
+ _INIT_DCS_CMD(0xCA, 0x43),
+ _INIT_DCS_CMD(0xC9, 0x07),
+ _INIT_DCS_CMD(0xE4, 0xC0),
+ _INIT_DCS_CMD(0xE5, 0x0D),
+ _INIT_DCS_CMD(0xCB, 0x00),
+ _INIT_DCS_CMD(0xB0, 0x06),
+ _INIT_DCS_CMD(0xB8, 0xA5),
+ _INIT_DCS_CMD(0xC0, 0xA5),
+ _INIT_DCS_CMD(0xC7, 0x0F),
+ _INIT_DCS_CMD(0xD5, 0x32),
+ _INIT_DCS_CMD(0xB8, 0x00),
+ _INIT_DCS_CMD(0xC0, 0x00),
+ _INIT_DCS_CMD(0xBC, 0x00),
+ _INIT_DCS_CMD(0xB0, 0x07),
+ _INIT_DCS_CMD(0xB1, 0x00),
+ _INIT_DCS_CMD(0xB2, 0x02),
+ _INIT_DCS_CMD(0xB3, 0x0F),
+ _INIT_DCS_CMD(0xB4, 0x25),
+ _INIT_DCS_CMD(0xB5, 0x39),
+ _INIT_DCS_CMD(0xB6, 0x4E),
+ _INIT_DCS_CMD(0xB7, 0x72),
+ _INIT_DCS_CMD(0xB8, 0x97),
+ _INIT_DCS_CMD(0xB9, 0xDC),
+ _INIT_DCS_CMD(0xBA, 0x22),
+ _INIT_DCS_CMD(0xBB, 0xA4),
+ _INIT_DCS_CMD(0xBC, 0x2B),
+ _INIT_DCS_CMD(0xBD, 0x2F),
+ _INIT_DCS_CMD(0xBE, 0xA9),
+ _INIT_DCS_CMD(0xBF, 0x25),
+ _INIT_DCS_CMD(0xC0, 0x61),
+ _INIT_DCS_CMD(0xC1, 0x97),
+ _INIT_DCS_CMD(0xC2, 0xB2),
+ _INIT_DCS_CMD(0xC3, 0xCD),
+ _INIT_DCS_CMD(0xC4, 0xD9),
+ _INIT_DCS_CMD(0xC5, 0xE7),
+ _INIT_DCS_CMD(0xC6, 0xF4),
+ _INIT_DCS_CMD(0xC7, 0xFA),
+ _INIT_DCS_CMD(0xC8, 0xFC),
+ _INIT_DCS_CMD(0xC9, 0x00),
+ _INIT_DCS_CMD(0xCA, 0x00),
+ _INIT_DCS_CMD(0xCB, 0x16),
+ _INIT_DCS_CMD(0xCC, 0xAF),
+ _INIT_DCS_CMD(0xCD, 0xFF),
+ _INIT_DCS_CMD(0xCE, 0xFF),
+ _INIT_DCS_CMD(0xB0, 0x08),
+ _INIT_DCS_CMD(0xB1, 0x04),
+ _INIT_DCS_CMD(0xB2, 0x05),
+ _INIT_DCS_CMD(0xB3, 0x11),
+ _INIT_DCS_CMD(0xB4, 0x24),
+ _INIT_DCS_CMD(0xB5, 0x39),
+ _INIT_DCS_CMD(0xB6, 0x4F),
+ _INIT_DCS_CMD(0xB7, 0x72),
+ _INIT_DCS_CMD(0xB8, 0x98),
+ _INIT_DCS_CMD(0xB9, 0xDC),
+ _INIT_DCS_CMD(0xBA, 0x23),
+ _INIT_DCS_CMD(0xBB, 0xA6),
+ _INIT_DCS_CMD(0xBC, 0x2C),
+ _INIT_DCS_CMD(0xBD, 0x30),
+ _INIT_DCS_CMD(0xBE, 0xAA),
+ _INIT_DCS_CMD(0xBF, 0x26),
+ _INIT_DCS_CMD(0xC0, 0x62),
+ _INIT_DCS_CMD(0xC1, 0x9B),
+ _INIT_DCS_CMD(0xC2, 0xB5),
+ _INIT_DCS_CMD(0xC3, 0xCF),
+ _INIT_DCS_CMD(0xC4, 0xDB),
+ _INIT_DCS_CMD(0xC5, 0xE8),
+ _INIT_DCS_CMD(0xC6, 0xF5),
+ _INIT_DCS_CMD(0xC7, 0xFA),
+ _INIT_DCS_CMD(0xC8, 0xFC),
+ _INIT_DCS_CMD(0xC9, 0x00),
+ _INIT_DCS_CMD(0xCA, 0x00),
+ _INIT_DCS_CMD(0xCB, 0x16),
+ _INIT_DCS_CMD(0xCC, 0xAF),
+ _INIT_DCS_CMD(0xCD, 0xFF),
+ _INIT_DCS_CMD(0xCE, 0xFF),
+ _INIT_DCS_CMD(0xB0, 0x09),
+ _INIT_DCS_CMD(0xB1, 0x04),
+ _INIT_DCS_CMD(0xB2, 0x02),
+ _INIT_DCS_CMD(0xB3, 0x16),
+ _INIT_DCS_CMD(0xB4, 0x24),
+ _INIT_DCS_CMD(0xB5, 0x3B),
+ _INIT_DCS_CMD(0xB6, 0x4F),
+ _INIT_DCS_CMD(0xB7, 0x73),
+ _INIT_DCS_CMD(0xB8, 0x99),
+ _INIT_DCS_CMD(0xB9, 0xE0),
+ _INIT_DCS_CMD(0xBA, 0x26),
+ _INIT_DCS_CMD(0xBB, 0xAD),
+ _INIT_DCS_CMD(0xBC, 0x36),
+ _INIT_DCS_CMD(0xBD, 0x3A),
+ _INIT_DCS_CMD(0xBE, 0xAE),
+ _INIT_DCS_CMD(0xBF, 0x2A),
+ _INIT_DCS_CMD(0xC0, 0x66),
+ _INIT_DCS_CMD(0xC1, 0x9E),
+ _INIT_DCS_CMD(0xC2, 0xB8),
+ _INIT_DCS_CMD(0xC3, 0xD1),
+ _INIT_DCS_CMD(0xC4, 0xDD),
+ _INIT_DCS_CMD(0xC5, 0xE9),
+ _INIT_DCS_CMD(0xC6, 0xF6),
+ _INIT_DCS_CMD(0xC7, 0xFA),
+ _INIT_DCS_CMD(0xC8, 0xFC),
+ _INIT_DCS_CMD(0xC9, 0x00),
+ _INIT_DCS_CMD(0xCA, 0x00),
+ _INIT_DCS_CMD(0xCB, 0x16),
+ _INIT_DCS_CMD(0xCC, 0xAF),
+ _INIT_DCS_CMD(0xCD, 0xFF),
+ _INIT_DCS_CMD(0xCE, 0xFF),
+ _INIT_DCS_CMD(0xB0, 0x0A),
+ _INIT_DCS_CMD(0xB1, 0x00),
+ _INIT_DCS_CMD(0xB2, 0x02),
+ _INIT_DCS_CMD(0xB3, 0x0F),
+ _INIT_DCS_CMD(0xB4, 0x25),
+ _INIT_DCS_CMD(0xB5, 0x39),
+ _INIT_DCS_CMD(0xB6, 0x4E),
+ _INIT_DCS_CMD(0xB7, 0x72),
+ _INIT_DCS_CMD(0xB8, 0x97),
+ _INIT_DCS_CMD(0xB9, 0xDC),
+ _INIT_DCS_CMD(0xBA, 0x22),
+ _INIT_DCS_CMD(0xBB, 0xA4),
+ _INIT_DCS_CMD(0xBC, 0x2B),
+ _INIT_DCS_CMD(0xBD, 0x2F),
+ _INIT_DCS_CMD(0xBE, 0xA9),
+ _INIT_DCS_CMD(0xBF, 0x25),
+ _INIT_DCS_CMD(0xC0, 0x61),
+ _INIT_DCS_CMD(0xC1, 0x97),
+ _INIT_DCS_CMD(0xC2, 0xB2),
+ _INIT_DCS_CMD(0xC3, 0xCD),
+ _INIT_DCS_CMD(0xC4, 0xD9),
+ _INIT_DCS_CMD(0xC5, 0xE7),
+ _INIT_DCS_CMD(0xC6, 0xF4),
+ _INIT_DCS_CMD(0xC7, 0xFA),
+ _INIT_DCS_CMD(0xC8, 0xFC),
+ _INIT_DCS_CMD(0xC9, 0x00),
+ _INIT_DCS_CMD(0xCA, 0x00),
+ _INIT_DCS_CMD(0xCB, 0x16),
+ _INIT_DCS_CMD(0xCC, 0xAF),
+ _INIT_DCS_CMD(0xCD, 0xFF),
+ _INIT_DCS_CMD(0xCE, 0xFF),
+ _INIT_DCS_CMD(0xB0, 0x0B),
+ _INIT_DCS_CMD(0xB1, 0x04),
+ _INIT_DCS_CMD(0xB2, 0x05),
+ _INIT_DCS_CMD(0xB3, 0x11),
+ _INIT_DCS_CMD(0xB4, 0x24),
+ _INIT_DCS_CMD(0xB5, 0x39),
+ _INIT_DCS_CMD(0xB6, 0x4F),
+ _INIT_DCS_CMD(0xB7, 0x72),
+ _INIT_DCS_CMD(0xB8, 0x98),
+ _INIT_DCS_CMD(0xB9, 0xDC),
+ _INIT_DCS_CMD(0xBA, 0x23),
+ _INIT_DCS_CMD(0xBB, 0xA6),
+ _INIT_DCS_CMD(0xBC, 0x2C),
+ _INIT_DCS_CMD(0xBD, 0x30),
+ _INIT_DCS_CMD(0xBE, 0xAA),
+ _INIT_DCS_CMD(0xBF, 0x26),
+ _INIT_DCS_CMD(0xC0, 0x62),
+ _INIT_DCS_CMD(0xC1, 0x9B),
+ _INIT_DCS_CMD(0xC2, 0xB5),
+ _INIT_DCS_CMD(0xC3, 0xCF),
+ _INIT_DCS_CMD(0xC4, 0xDB),
+ _INIT_DCS_CMD(0xC5, 0xE8),
+ _INIT_DCS_CMD(0xC6, 0xF5),
+ _INIT_DCS_CMD(0xC7, 0xFA),
+ _INIT_DCS_CMD(0xC8, 0xFC),
+ _INIT_DCS_CMD(0xC9, 0x00),
+ _INIT_DCS_CMD(0xCA, 0x00),
+ _INIT_DCS_CMD(0xCB, 0x16),
+ _INIT_DCS_CMD(0xCC, 0xAF),
+ _INIT_DCS_CMD(0xCD, 0xFF),
+ _INIT_DCS_CMD(0xCE, 0xFF),
+ _INIT_DCS_CMD(0xB0, 0x0C),
+ _INIT_DCS_CMD(0xB1, 0x04),
+ _INIT_DCS_CMD(0xB2, 0x02),
+ _INIT_DCS_CMD(0xB3, 0x16),
+ _INIT_DCS_CMD(0xB4, 0x24),
+ _INIT_DCS_CMD(0xB5, 0x3B),
+ _INIT_DCS_CMD(0xB6, 0x4F),
+ _INIT_DCS_CMD(0xB7, 0x73),
+ _INIT_DCS_CMD(0xB8, 0x99),
+ _INIT_DCS_CMD(0xB9, 0xE0),
+ _INIT_DCS_CMD(0xBA, 0x26),
+ _INIT_DCS_CMD(0xBB, 0xAD),
+ _INIT_DCS_CMD(0xBC, 0x36),
+ _INIT_DCS_CMD(0xBD, 0x3A),
+ _INIT_DCS_CMD(0xBE, 0xAE),
+ _INIT_DCS_CMD(0xBF, 0x2A),
+ _INIT_DCS_CMD(0xC0, 0x66),
+ _INIT_DCS_CMD(0xC1, 0x9E),
+ _INIT_DCS_CMD(0xC2, 0xB8),
+ _INIT_DCS_CMD(0xC3, 0xD1),
+ _INIT_DCS_CMD(0xC4, 0xDD),
+ _INIT_DCS_CMD(0xC5, 0xE9),
+ _INIT_DCS_CMD(0xC6, 0xF6),
+ _INIT_DCS_CMD(0xC7, 0xFA),
+ _INIT_DCS_CMD(0xC8, 0xFC),
+ _INIT_DCS_CMD(0xC9, 0x00),
+ _INIT_DCS_CMD(0xCA, 0x00),
+ _INIT_DCS_CMD(0xCB, 0x16),
+ _INIT_DCS_CMD(0xCC, 0xAF),
+ _INIT_DCS_CMD(0xCD, 0xFF),
+ _INIT_DCS_CMD(0xCE, 0xFF),
+ _INIT_DCS_CMD(0xB0, 0x00),
+ _INIT_DCS_CMD(0xB3, 0x08),
+ _INIT_DCS_CMD(0xB0, 0x04),
+ _INIT_DCS_CMD(0xB8, 0x68),
+ _INIT_DELAY_CMD(150),
+ {},
+};
+
+static inline struct boe_panel *to_boe_panel(struct drm_panel *panel)
+{
+ return container_of(panel, struct boe_panel, base);
+}
+
+static int boe_panel_init(struct boe_panel *boe)
+{
+ struct mipi_dsi_device *dsi = boe->dsi;
+ struct drm_panel *panel = &boe->base;
+ int err, i;
+
+ if (boe->desc->init_cmds) {
+ const struct panel_init_cmd *init_cmds = boe->desc->init_cmds;
+
+ for (i = 0; init_cmds[i].len != 0; i++) {
+ const struct panel_init_cmd *cmd = &init_cmds[i];
+
+ switch (cmd->type) {
+ case DELAY_CMD:
+ msleep(cmd->data[0]);
+ err = 0;
+ break;
+
+ case INIT_DCS_CMD:
+ err = mipi_dsi_dcs_write(dsi, cmd->data[0],
+ cmd->len <= 1 ? NULL :
+ &cmd->data[1],
+ cmd->len - 1);
+ break;
+ }
+
+ if (err < 0) {
+ dev_err(panel->dev,
+ "failed to write command %u\n", i);
+ return err;
+ }
+ }
+ }
+ return 0;
+}
+
+static int boe_panel_off(struct boe_panel *boe)
+{
+ struct mipi_dsi_device *dsi = boe->dsi;
+ int ret;
+
+ dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
+
+ ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int boe_panel_disable(struct drm_panel *panel)
+{
+ struct boe_panel *boe = to_boe_panel(panel);
+
+ if (!boe->enabled)
+ return 0;
+
+ backlight_disable(boe->backlight);
+
+ boe->enabled = false;
+
+ return 0;
+}
+
+static int boe_panel_unprepare(struct drm_panel *panel)
+{
+ struct boe_panel *boe = to_boe_panel(panel);
+ int ret;
+
+ if (!boe->prepared)
+ return 0;
+
+ ret = boe_panel_off(boe);
+ if (ret < 0) {
+ dev_err(panel->dev, "failed to set panel off: %d\n", ret);
+ return ret;
+ }
+
+ msleep(150);
+ gpiod_set_value(boe->enable_gpio, 0);
+ usleep_range(500, 1000);
+ regulator_disable(boe->avee);
+ regulator_disable(boe->avdd);
+ usleep_range(5000, 7000);
+ regulator_disable(boe->pp1800);
+
+ boe->prepared = false;
+
+ return 0;
+}
+
+static int boe_panel_prepare(struct drm_panel *panel)
+{
+ struct boe_panel *boe = to_boe_panel(panel);
+ int ret;
+
+ if (boe->prepared)
+ return 0;
+
+ gpiod_set_value(boe->enable_gpio, 0);
+ usleep_range(1000, 1500);
+
+ ret = regulator_enable(boe->pp1800);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(3000, 5000);
+
+ ret = regulator_enable(boe->avdd);
+ if (ret < 0)
+ goto poweroff1v8;
+ ret = regulator_enable(boe->avee);
+ if (ret < 0)
+ goto poweroffavdd;
+
+ msleep(100);
+
+ gpiod_set_value(boe->enable_gpio, 1);
+ usleep_range(10000, 12000);
+
+ ret = boe_panel_init(boe);
+ if (ret < 0) {
+ dev_err(panel->dev, "failed to init panel: %d\n", ret);
+ goto poweroff;
+ }
+
+ boe->prepared = true;
+
+ return 0;
+
+poweroff:
+ regulator_disable(boe->avee);
+poweroffavdd:
+ regulator_disable(boe->avdd);
+poweroff1v8:
+ usleep_range(5000, 7000);
+ regulator_disable(boe->pp1800);
+ gpiod_set_value(boe->enable_gpio, 0);
+
+ return ret;
+}
+
+static int boe_panel_enable(struct drm_panel *panel)
+{
+ struct boe_panel *boe = to_boe_panel(panel);
+ int ret;
+
+ if (boe->enabled)
+ return 0;
+
+ ret = backlight_enable(boe->backlight);
+ if (ret) {
+ dev_err(panel->dev, "Failed to enable backlight %d\n",
+ ret);
+ return ret;
+ }
+
+ boe->enabled = true;
+
+ return 0;
+}
+
+static const struct drm_display_mode boe_tv101wum_nl6_default_mode = {
+ .clock = 159425,
+ .hdisplay = 1200,
+ .hsync_start = 1200 + 100,
+ .hsync_end = 1200 + 100 + 40,
+ .htotal = 1200 + 100 + 40 + 24,
+ .vdisplay = 1920,
+ .vsync_start = 1920 + 10,
+ .vsync_end = 1920 + 10 + 14,
+ .vtotal = 1920 + 10 + 14 + 4,
+ .vrefresh = 60,
+};
+
+static const struct panel_desc boe_tv101wum_nl6_desc = {
+ .modes = &boe_tv101wum_nl6_default_mode,
+ .bpc = 8,
+ .size = {
+ .width_mm = 135,
+ .height_mm = 216,
+ },
+ .lanes = 4,
+ .format = MIPI_DSI_FMT_RGB888,
+ .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+ MIPI_DSI_MODE_LPM,
+ .init_cmds = boe_init_cmd,
+};
+
+static int boe_panel_get_modes(struct drm_panel *panel)
+{
+ struct boe_panel *boe = to_boe_panel(panel);
+ const struct drm_display_mode *m = boe->desc->modes;
+ struct drm_display_mode *mode;
+
+ mode = drm_mode_duplicate(panel->drm, m);
+ if (!mode) {
+ dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
+ m->hdisplay, m->vdisplay, m->vrefresh);
+ return -ENOMEM;
+ }
+
+ mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+ drm_mode_set_name(mode);
+ drm_mode_probed_add(panel->connector, mode);
+
+ panel->connector->display_info.width_mm = boe->desc->size.width_mm;
+ panel->connector->display_info.height_mm = boe->desc->size.height_mm;
+ panel->connector->display_info.bpc = boe->desc->bpc;
+
+ return 1;
+}
+
+static const struct drm_panel_funcs boe_panel_funcs = {
+ .disable = boe_panel_disable,
+ .unprepare = boe_panel_unprepare,
+ .prepare = boe_panel_prepare,
+ .enable = boe_panel_enable,
+ .get_modes = boe_panel_get_modes,
+};
+
+static int boe_panel_add(struct boe_panel *boe)
+{
+ struct device *dev = &boe->dsi->dev;
+
+ boe->avdd = devm_regulator_get(dev, "avdd");
+ if (IS_ERR(boe->avdd))
+ return PTR_ERR(boe->avdd);
+
+ boe->avee = devm_regulator_get(dev, "avee");
+ if (IS_ERR(boe->avee))
+ return PTR_ERR(boe->avee);
+
+ boe->pp1800 = devm_regulator_get(dev, "pp1800");
+ if (IS_ERR(boe->pp1800))
+ return PTR_ERR(boe->pp1800);
+
+ boe->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(boe->enable_gpio)) {
+ dev_err(dev, "cannot get reset-gpios %ld\n",
+ PTR_ERR(boe->enable_gpio));
+ return PTR_ERR(boe->enable_gpio);
+ }
+
+ gpiod_set_value(boe->enable_gpio, 0);
+
+ boe->backlight = devm_of_find_backlight(dev);
+ if (IS_ERR(boe->backlight))
+ return PTR_ERR(boe->backlight);
+
+ drm_panel_init(&boe->base);
+ boe->base.funcs = &boe_panel_funcs;
+ boe->base.dev = &boe->dsi->dev;
+
+ return drm_panel_add(&boe->base);
+}
+
+static int boe_panel_probe(struct mipi_dsi_device *dsi)
+{
+ struct boe_panel *boe;
+ int ret;
+ const struct panel_desc *desc;
+
+ boe = devm_kzalloc(&dsi->dev, sizeof(*boe), GFP_KERNEL);
+ if (!boe)
+ return -ENOMEM;
+
+ desc = of_device_get_match_data(&dsi->dev);
+ dsi->lanes = desc->lanes;
+ dsi->format = desc->format;
+ dsi->mode_flags = desc->mode_flags;
+ boe->desc = desc;
+ boe->dsi = dsi;
+ ret = boe_panel_add(boe);
+ if (ret < 0)
+ return ret;
+
+ mipi_dsi_set_drvdata(dsi, boe);
+
+ return mipi_dsi_attach(dsi);
+}
+
+static int boe_panel_remove(struct mipi_dsi_device *dsi)
+{
+ struct boe_panel *boe = mipi_dsi_get_drvdata(dsi);
+ int ret;
+
+ ret = boe_panel_disable(&boe->base);
+ if (ret < 0)
+ dev_err(&dsi->dev, "failed to disable panel: %d\n", ret);
+
+ ret = mipi_dsi_detach(dsi);
+ if (ret < 0)
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
+
+ if (boe->base.dev)
+ drm_panel_remove(&boe->base);
+
+ return 0;
+}
+
+static void boe_panel_shutdown(struct mipi_dsi_device *dsi)
+{
+ struct boe_panel *boe = mipi_dsi_get_drvdata(dsi);
+
+ boe_panel_disable(&boe->base);
+}
+
+static const struct of_device_id boe_of_match[] = {
+ { .compatible = "boe,tv101wum-nl6",
+ .data = &boe_tv101wum_nl6_desc
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, boe_of_match);
+
+static struct mipi_dsi_driver boe_panel_driver = {
+ .driver = {
+ .name = "panel-boe-tv101wum-nl6",
+ .of_match_table = boe_of_match,
+ },
+ .probe = boe_panel_probe,
+ .remove = boe_panel_remove,
+ .shutdown = boe_panel_shutdown,
+};
+module_mipi_dsi_driver(boe_panel_driver);
+
+MODULE_AUTHOR("Jitao Shi <[email protected]>");
+MODULE_DESCRIPTION("BOE tv101wum-nl6 1200x1920 video mode panel driver");
+MODULE_LICENSE("GPL v2");
--
2.21.0
Hi Jitao.
> Changes since v4:
You are hit by some of the progress made in the kernel.
New dispaly bindings are preferred to be in meta-schma formal (.yaml
files).
This allows more formals checks and this is the format that we
hope all display bindigns will migrate over to use once
someone steps up and do a mass conversion.
This is a bit extra work now, but much better to have it done
by someone who knows the HW.
Sam