Currently the regulator-suspend-min/max-microvolt must be within the
root regulator node but the dt-bindings specifies it as subnode
properties for the regulator-state-[mem/disk/standby] node. The only DT
using this bindings currently is the at91-sama5d2_xplained.dts and this
DT uses it correctly. I don't know if it isn't tested but it can't work
without this fix.
Fixes: f7efad10b5c4 ("regulator: add PM suspend and resume hooks")
Signed-off-by: Marco Felsch <[email protected]>
---
drivers/regulator/of_regulator.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 9112faa6a9a0..38dd06fbab38 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -231,12 +231,12 @@ static int of_get_regulation_constraints(struct device *dev,
"regulator-off-in-suspend"))
suspend_state->enabled = DISABLE_IN_SUSPEND;
- if (!of_property_read_u32(np, "regulator-suspend-min-microvolt",
- &pval))
+ if (!of_property_read_u32(suspend_np,
+ "regulator-suspend-min-microvolt", &pval))
suspend_state->min_uV = pval;
- if (!of_property_read_u32(np, "regulator-suspend-max-microvolt",
- &pval))
+ if (!of_property_read_u32(suspend_np,
+ "regulator-suspend-max-microvolt", &pval))
suspend_state->max_uV = pval;
if (!of_property_read_u32(suspend_np,
--
2.20.1