2019-09-18 09:33:07

by Alexandru Ardelean

Subject: [PATCH] dt-bindings: net: remove un-implemented property

The `adi,disable-energy-detect` property was implemented in an initial
version of the `adin` driver series, but after a review it was discarded in
favor of implementing the ETHTOOL_PHY_EDPD phy-tunable option.

With the ETHTOOL_PHY_EDPD control, it's possible to disable/enable
Energy-Detect-Power-Down for the `adin` PHY, so this device-tree is not
needed.

Fixes: 767078132ff9 ("dt-bindings: net: add bindings for ADIN PHY driver")
Signed-off-by: Alexandru Ardelean <[email protected]>
---
Documentation/devicetree/bindings/net/adi,adin.yaml | 7 -------
1 file changed, 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/adi,adin.yaml b/Documentation/devicetree/bindings/net/adi,adin.yaml
index 69375cb28e92..d95cc691a65f 100644
--- a/Documentation/devicetree/bindings/net/adi,adin.yaml
+++ b/Documentation/devicetree/bindings/net/adi,adin.yaml
@@ -36,12 +36,6 @@ properties:
enum: [ 4, 8, 12, 16, 20, 24 ]
default: 8

- adi,disable-energy-detect:
- description: |
- Disables Energy Detect Powerdown Mode (default disabled, i.e energy detect
- is enabled if this property is unspecified)
- type: boolean
-
examples:
- |
ethernet {
@@ -68,6 +62,5 @@ examples:
reg = <1>;

adi,fifo-depth-bits = <16>;
- adi,disable-energy-detect;
};
};
--
2.20.1

2019-09-18 13:26:12

by Rob Herring

Subject: Re: [PATCH] dt-bindings: net: remove un-implemented property

On Wed, Sep 18, 2019 at 3:15 AM Alexandru Ardelean
<[email protected]> wrote:
>
> The `adi,disable-energy-detect` property was implemented in an initial
> version of the `adin` driver series, but after a review it was discarded in
> favor of implementing the ETHTOOL_PHY_EDPD phy-tunable option.
>
> With the ETHTOOL_PHY_EDPD control, it's possible to disable/enable
> Energy-Detect-Power-Down for the `adin` PHY, so this device-tree is not
> needed.
>
> Fixes: 767078132ff9 ("dt-bindings: net: add bindings for ADIN PHY driver")
> Signed-off-by: Alexandru Ardelean <[email protected]>
> ---
> Documentation/devicetree/bindings/net/adi,adin.yaml | 7 -------
> 1 file changed, 7 deletions(-)

Reviewed-by: Rob Herring <[email protected]>

2019-09-23 13:37:19

by Jakub Kicinski

Subject: Re: [PATCH] dt-bindings: net: remove un-implemented property

On Wed, 18 Sep 2019 14:14:47 +0300, Alexandru Ardelean wrote:
> The `adi,disable-energy-detect` property was implemented in an initial
> version of the `adin` driver series, but after a review it was discarded in
> favor of implementing the ETHTOOL_PHY_EDPD phy-tunable option.
>
> With the ETHTOOL_PHY_EDPD control, it's possible to disable/enable
> Energy-Detect-Power-Down for the `adin` PHY, so this device-tree is not
> needed.
>
> Fixes: 767078132ff9 ("dt-bindings: net: add bindings for ADIN PHY driver")
> Signed-off-by: Alexandru Ardelean <[email protected]>

Applied, thank you!