BPF_PROG_TYPE_SOCK_OPS program can reenter bpf_event_output because it can
be called from atomic and non-atomic contexts since we don't have
bpf_prog_active to prevent it happen.
This patch enables 3 level of nesting to support normal, irq and nmi
context.
We can easily reproduce the issue by running neper crr mode with 100 flows
and 10 threads from neper client side.
Here is the whole stack dump:
[ 515.228898] WARNING: CPU: 20 PID: 14686 at kernel/trace/bpf_trace.c:549 bpf_event_output+0x1f9/0x220
[ 515.228903] CPU: 20 PID: 14686 Comm: tcp_crr Tainted: G W 4.15.0-smp-fixpanic #44
[ 515.228904] Hardware name: Intel TBG,ICH10/Ikaria_QC_1b, BIOS 1.22.0 06/04/2018
[ 515.228905] RIP: 0010:bpf_event_output+0x1f9/0x220
[ 515.228906] RSP: 0018:ffff9a57ffc03938 EFLAGS: 00010246
[ 515.228907] RAX: 0000000000000012 RBX: 0000000000000001 RCX: 0000000000000000
[ 515.228907] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffffffff836b0f80
[ 515.228908] RBP: ffff9a57ffc039c8 R08: 0000000000000004 R09: 0000000000000012
[ 515.228908] R10: ffff9a57ffc1de40 R11: 0000000000000000 R12: 0000000000000002
[ 515.228909] R13: ffff9a57e13bae00 R14: 00000000ffffffff R15: ffff9a57ffc1e2c0
[ 515.228910] FS: 00007f5a3e6ec700(0000) GS:ffff9a57ffc00000(0000) knlGS:0000000000000000
[ 515.228910] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 515.228911] CR2: 0000537082664fff CR3: 000000061fed6002 CR4: 00000000000226f0
[ 515.228911] Call Trace:
[ 515.228913] <IRQ>
[ 515.228919] [<ffffffff82c6c6cb>] bpf_sockopt_event_output+0x3b/0x50
[ 515.228923] [<ffffffff8265daee>] ? bpf_ktime_get_ns+0xe/0x10
[ 515.228927] [<ffffffff8266fda5>] ? __cgroup_bpf_run_filter_sock_ops+0x85/0x100
[ 515.228930] [<ffffffff82cf90a5>] ? tcp_init_transfer+0x125/0x150
[ 515.228933] [<ffffffff82cf9159>] ? tcp_finish_connect+0x89/0x110
[ 515.228936] [<ffffffff82cf98e4>] ? tcp_rcv_state_process+0x704/0x1010
[ 515.228939] [<ffffffff82c6e263>] ? sk_filter_trim_cap+0x53/0x2a0
[ 515.228942] [<ffffffff82d90d1f>] ? tcp_v6_inbound_md5_hash+0x6f/0x1d0
[ 515.228945] [<ffffffff82d92160>] ? tcp_v6_do_rcv+0x1c0/0x460
[ 515.228947] [<ffffffff82d93558>] ? tcp_v6_rcv+0x9f8/0xb30
[ 515.228951] [<ffffffff82d737c0>] ? ip6_route_input+0x190/0x220
[ 515.228955] [<ffffffff82d5f7ad>] ? ip6_protocol_deliver_rcu+0x6d/0x450
[ 515.228958] [<ffffffff82d60246>] ? ip6_rcv_finish+0xb6/0x170
[ 515.228961] [<ffffffff82d5fb90>] ? ip6_protocol_deliver_rcu+0x450/0x450
[ 515.228963] [<ffffffff82d60361>] ? ipv6_rcv+0x61/0xe0
[ 515.228966] [<ffffffff82d60190>] ? ipv6_list_rcv+0x330/0x330
[ 515.228969] [<ffffffff82c4976b>] ? __netif_receive_skb_one_core+0x5b/0xa0
[ 515.228972] [<ffffffff82c497d1>] ? __netif_receive_skb+0x21/0x70
[ 515.228975] [<ffffffff82c4a8d2>] ? process_backlog+0xb2/0x150
[ 515.228978] [<ffffffff82c4aadf>] ? net_rx_action+0x16f/0x410
[ 515.228982] [<ffffffff830000dd>] ? __do_softirq+0xdd/0x305
[ 515.228986] [<ffffffff8252cfdc>] ? irq_exit+0x9c/0xb0
[ 515.228989] [<ffffffff82e02de5>] ? smp_call_function_single_interrupt+0x65/0x120
[ 515.228991] [<ffffffff82e020e1>] ? call_function_single_interrupt+0x81/0x90
[ 515.228992] </IRQ>
[ 515.228996] [<ffffffff82a11ff0>] ? io_serial_in+0x20/0x20
[ 515.229000] [<ffffffff8259c040>] ? console_unlock+0x230/0x490
[ 515.229003] [<ffffffff8259cbaa>] ? vprintk_emit+0x26a/0x2a0
[ 515.229006] [<ffffffff8259cbff>] ? vprintk_default+0x1f/0x30
[ 515.229008] [<ffffffff8259d9f5>] ? vprintk_func+0x35/0x70
[ 515.229011] [<ffffffff8259d4bb>] ? printk+0x50/0x66
[ 515.229013] [<ffffffff82637637>] ? bpf_event_output+0xb7/0x220
[ 515.229016] [<ffffffff82c6c6cb>] ? bpf_sockopt_event_output+0x3b/0x50
[ 515.229019] [<ffffffff8265daee>] ? bpf_ktime_get_ns+0xe/0x10
[ 515.229023] [<ffffffff82c29e87>] ? release_sock+0x97/0xb0
[ 515.229026] [<ffffffff82ce9d6a>] ? tcp_recvmsg+0x31a/0xda0
[ 515.229029] [<ffffffff8266fda5>] ? __cgroup_bpf_run_filter_sock_ops+0x85/0x100
[ 515.229032] [<ffffffff82ce77c1>] ? tcp_set_state+0x191/0x1b0
[ 515.229035] [<ffffffff82ced10e>] ? tcp_disconnect+0x2e/0x600
[ 515.229038] [<ffffffff82cecbbb>] ? tcp_close+0x3eb/0x460
[ 515.229040] [<ffffffff82d21082>] ? inet_release+0x42/0x70
[ 515.229043] [<ffffffff82d58809>] ? inet6_release+0x39/0x50
[ 515.229046] [<ffffffff82c1f32d>] ? __sock_release+0x4d/0xd0
[ 515.229049] [<ffffffff82c1f3e5>] ? sock_close+0x15/0x20
[ 515.229052] [<ffffffff8273b517>] ? __fput+0xe7/0x1f0
[ 515.229055] [<ffffffff8273b66e>] ? ____fput+0xe/0x10
[ 515.229058] [<ffffffff82547bf2>] ? task_work_run+0x82/0xb0
[ 515.229061] [<ffffffff824086df>] ? exit_to_usermode_loop+0x7e/0x11f
[ 515.229064] [<ffffffff82408171>] ? do_syscall_64+0x111/0x130
[ 515.229067] [<ffffffff82e0007c>] ? entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Fixes: a5a3a828cd00 ("bpf: add perf event notificaton support for sock_ops")
Effort: BPF
Signed-off-by: Allan Zhang <[email protected]>
Reviewed-by: Stanislav Fomichev <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
---
kernel/trace/bpf_trace.c | 26 +++++++++++++++++++++-----
1 file changed, 21 insertions(+), 5 deletions(-)
diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index ca1255d14576..3e38a010003c 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -500,14 +500,17 @@ static const struct bpf_func_proto bpf_perf_event_output_proto = {
.arg5_type = ARG_CONST_SIZE_OR_ZERO,
};
-static DEFINE_PER_CPU(struct pt_regs, bpf_pt_regs);
-static DEFINE_PER_CPU(struct perf_sample_data, bpf_misc_sd);
+static DEFINE_PER_CPU(int, bpf_event_output_nest_level);
+struct bpf_nested_pt_regs {
+ struct pt_regs regs[3];
+};
+static DEFINE_PER_CPU(struct bpf_nested_pt_regs, bpf_pt_regs);
+static DEFINE_PER_CPU(struct bpf_trace_sample_data, bpf_misc_sds);
u64 bpf_event_output(struct bpf_map *map, u64 flags, void *meta, u64 meta_size,
void *ctx, u64 ctx_size, bpf_ctx_copy_t ctx_copy)
{
- struct perf_sample_data *sd = this_cpu_ptr(&bpf_misc_sd);
- struct pt_regs *regs = this_cpu_ptr(&bpf_pt_regs);
+ int nest_level = this_cpu_inc_return(bpf_event_output_nest_level);
struct perf_raw_frag frag = {
.copy = ctx_copy,
.size = ctx_size,
@@ -522,12 +525,25 @@ u64 bpf_event_output(struct bpf_map *map, u64 flags, void *meta, u64 meta_size,
.data = meta,
},
};
+ struct perf_sample_data *sd;
+ struct pt_regs *regs;
+ u64 ret;
+
+ if (WARN_ON_ONCE(nest_level > ARRAY_SIZE(bpf_misc_sds.sds))) {
+ ret = -EBUSY;
+ goto out;
+ }
+ sd = this_cpu_ptr(&bpf_misc_sds.sds[nest_level - 1]);
+ regs = this_cpu_ptr(&bpf_pt_regs.regs[nest_level - 1]);
perf_fetch_caller_regs(regs);
perf_sample_data_init(sd, 0, 0);
sd->raw = &raw;
- return __bpf_perf_event_output(regs, map, flags, sd);
+ ret = __bpf_perf_event_output(regs, map, flags, sd);
+out:
+ this_cpu_dec(bpf_event_output_nest_level);
+ return ret;
}
BPF_CALL_0(bpf_get_current_task)
--
2.23.0.351.gc4317032e6-goog
Allan Zhang wrote:
> BPF_PROG_TYPE_SOCK_OPS program can reenter bpf_event_output because it can
> be called from atomic and non-atomic contexts since we don't have
> bpf_prog_active to prevent it happen.
>
> This patch enables 3 level of nesting to support normal, irq and nmi
> context.
>
> We can easily reproduce the issue by running neper crr mode with 100 flows
> and 10 threads from neper client side.
>
> Here is the whole stack dump:
>
> [ 515.228898] WARNING: CPU: 20 PID: 14686 at kernel/trace/bpf_trace.c:549 bpf_event_output+0x1f9/0x220
> [ 515.228903] CPU: 20 PID: 14686 Comm: tcp_crr Tainted: G W 4.15.0-smp-fixpanic #44
> [ 515.228904] Hardware name: Intel TBG,ICH10/Ikaria_QC_1b, BIOS 1.22.0 06/04/2018
> [ 515.228905] RIP: 0010:bpf_event_output+0x1f9/0x220
[...]
> Fixes: a5a3a828cd00 ("bpf: add perf event notificaton support for sock_ops")
>
> Effort: BPF
> Signed-off-by: Allan Zhang <[email protected]>
> Reviewed-by: Stanislav Fomichev <[email protected]>
> Reviewed-by: Eric Dumazet <[email protected]>
> ---
LGTM thanks.
Acked-by: John Fastabend <[email protected]>
On Wed, Sep 25, 2019 at 04:43:12PM -0700, Allan Zhang wrote:
> BPF_PROG_TYPE_SOCK_OPS program can reenter bpf_event_output because it can
> be called from atomic and non-atomic contexts since we don't have
> bpf_prog_active to prevent it happen.
>
> This patch enables 3 level of nesting to support normal, irq and nmi
> context.
>
> We can easily reproduce the issue by running neper crr mode with 100 flows
> and 10 threads from neper client side.
>
> Here is the whole stack dump:
[...]
>
> Fixes: a5a3a828cd00 ("bpf: add perf event notificaton support for sock_ops")
>
> Effort: BPF
> Signed-off-by: Allan Zhang <[email protected]>
> Reviewed-by: Stanislav Fomichev <[email protected]>
> Reviewed-by: Eric Dumazet <[email protected]>
Applied, thanks!