This patch fixes some spelling typo in sample.conf
Signed-off-by: Masanari Iida <[email protected]>
---
tools/testing/ktest/sample.conf | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
index c3bc933d437b..10af34819642 100644
--- a/tools/testing/ktest/sample.conf
+++ b/tools/testing/ktest/sample.conf
@@ -10,7 +10,7 @@
#
# Options set in the beginning of the file are considered to be
-# default options. These options can be overriden by test specific
+# default options. These options can be overridden by test specific
# options, with the following exceptions:
#
# LOG_FILE
@@ -204,7 +204,7 @@
#
# This config file can also contain "config variables".
# These are assigned with ":=" instead of the ktest option
-# assigment "=".
+# assignment "=".
#
# The difference between ktest options and config variables
# is that config variables can be used multiple times,
@@ -263,7 +263,7 @@
#### Using options in other options ####
#
# Options that are defined in the config file may also be used
-# by other options. All options are evaulated at time of
+# by other options. All options are evaluated at time of
# use (except that config variables are evaluated at config
# processing time).
#
@@ -707,7 +707,7 @@
# Line to define a successful boot up in console output.
# This is what the line contains, not the entire line. If you need
-# the entire line to match, then use regural expression syntax like:
+# the entire line to match, then use regular expression syntax like:
# (do not add any quotes around it)
#
# SUCCESS_LINE = ^MyBox Login:$
@@ -839,7 +839,7 @@
# (ignored if POWEROFF_ON_SUCCESS is set)
#REBOOT_ON_SUCCESS = 1
-# In case there are isses with rebooting, you can specify this
+# In case there are issues with rebooting, you can specify this
# to always powercycle after this amount of time after calling
# reboot.
# Note, POWERCYCLE_AFTER_REBOOT = 0 does NOT disable it. It just
@@ -848,7 +848,7 @@
# (default undefined)
#POWERCYCLE_AFTER_REBOOT = 5
-# In case there's isses with halting, you can specify this
+# In case there's issues with halting, you can specify this
# to always poweroff after this amount of time after calling
# halt.
# Note, POWEROFF_AFTER_HALT = 0 does NOT disable it. It just
@@ -972,7 +972,7 @@
#
# PATCHCHECK_START is required and is the first patch to
# test (the SHA1 of the commit). You may also specify anything
-# that git checkout allows (branch name, tage, HEAD~3).
+# that git checkout allows (branch name, tag, HEAD~3).
#
# PATCHCHECK_END is the last patch to check (default HEAD)
#
@@ -994,7 +994,7 @@
# IGNORE_WARNINGS is set for the given commit's sha1
#
# IGNORE_WARNINGS can be used to disable the failure of patchcheck
-# on a particuler commit (SHA1). You can add more than one commit
+# on a particular commit (SHA1). You can add more than one commit
# by adding a list of SHA1s that are space delimited.
#
# If BUILD_NOCLEAN is set, then make mrproper will not be run on
@@ -1093,7 +1093,7 @@
# whatever reason. (Can't reboot, want to inspect each iteration)
# Doing a BISECT_MANUAL will have the test wait for you to
# tell it if the test passed or failed after each iteration.
-# This is basicall the same as running git bisect yourself
+# This is basically the same as running git bisect yourself
# but ktest will rebuild and install the kernel for you.
#
# BISECT_CHECK = 1 (optional, default 0)
@@ -1239,7 +1239,7 @@
#
# CONFIG_BISECT_EXEC (optional)
# The config bisect is a separate program that comes with ktest.pl.
-# By befault, it will look for:
+# By default, it will look for:
# `pwd`/config-bisect.pl # the location ktest.pl was executed from.
# If it does not find it there, it will look for:
# `dirname <ktest.pl>`/config-bisect.pl # The directory that holds ktest.pl
--
2.23.0.256.g4c86140027f4
On Mon, 30 Sep 2019 21:49:25 +0900
Masanari Iida <[email protected]> wrote:
> This patch fixes some spelling typo in sample.conf
>
> Signed-off-by: Masanari Iida <[email protected]>
Thanks for the patch. I'll add it to my queue.
-- Steve
On 9/30/19 5:49 AM, Masanari Iida wrote:
> This patch fixes some spelling typo in sample.conf
>
> Signed-off-by: Masanari Iida <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Thanks.
> ---
> tools/testing/ktest/sample.conf | 20 ++++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/tools/testing/ktest/sample.conf b/tools/testing/ktest/sample.conf
> index c3bc933d437b..10af34819642 100644
> --- a/tools/testing/ktest/sample.conf
> +++ b/tools/testing/ktest/sample.conf
> @@ -10,7 +10,7 @@
> #
>
> # Options set in the beginning of the file are considered to be
> -# default options. These options can be overriden by test specific
> +# default options. These options can be overridden by test specific
> # options, with the following exceptions:
> #
> # LOG_FILE
> @@ -204,7 +204,7 @@
> #
> # This config file can also contain "config variables".
> # These are assigned with ":=" instead of the ktest option
> -# assigment "=".
> +# assignment "=".
> #
> # The difference between ktest options and config variables
> # is that config variables can be used multiple times,
> @@ -263,7 +263,7 @@
> #### Using options in other options ####
> #
> # Options that are defined in the config file may also be used
> -# by other options. All options are evaulated at time of
> +# by other options. All options are evaluated at time of
> # use (except that config variables are evaluated at config
> # processing time).
> #
> @@ -707,7 +707,7 @@
>
> # Line to define a successful boot up in console output.
> # This is what the line contains, not the entire line. If you need
> -# the entire line to match, then use regural expression syntax like:
> +# the entire line to match, then use regular expression syntax like:
> # (do not add any quotes around it)
> #
> # SUCCESS_LINE = ^MyBox Login:$
> @@ -839,7 +839,7 @@
> # (ignored if POWEROFF_ON_SUCCESS is set)
> #REBOOT_ON_SUCCESS = 1
>
> -# In case there are isses with rebooting, you can specify this
> +# In case there are issues with rebooting, you can specify this
> # to always powercycle after this amount of time after calling
> # reboot.
> # Note, POWERCYCLE_AFTER_REBOOT = 0 does NOT disable it. It just
> @@ -848,7 +848,7 @@
> # (default undefined)
> #POWERCYCLE_AFTER_REBOOT = 5
>
> -# In case there's isses with halting, you can specify this
> +# In case there's issues with halting, you can specify this
> # to always poweroff after this amount of time after calling
> # halt.
> # Note, POWEROFF_AFTER_HALT = 0 does NOT disable it. It just
> @@ -972,7 +972,7 @@
> #
> # PATCHCHECK_START is required and is the first patch to
> # test (the SHA1 of the commit). You may also specify anything
> -# that git checkout allows (branch name, tage, HEAD~3).
> +# that git checkout allows (branch name, tag, HEAD~3).
> #
> # PATCHCHECK_END is the last patch to check (default HEAD)
> #
> @@ -994,7 +994,7 @@
> # IGNORE_WARNINGS is set for the given commit's sha1
> #
> # IGNORE_WARNINGS can be used to disable the failure of patchcheck
> -# on a particuler commit (SHA1). You can add more than one commit
> +# on a particular commit (SHA1). You can add more than one commit
> # by adding a list of SHA1s that are space delimited.
> #
> # If BUILD_NOCLEAN is set, then make mrproper will not be run on
> @@ -1093,7 +1093,7 @@
> # whatever reason. (Can't reboot, want to inspect each iteration)
> # Doing a BISECT_MANUAL will have the test wait for you to
> # tell it if the test passed or failed after each iteration.
> -# This is basicall the same as running git bisect yourself
> +# This is basically the same as running git bisect yourself
> # but ktest will rebuild and install the kernel for you.
> #
> # BISECT_CHECK = 1 (optional, default 0)
> @@ -1239,7 +1239,7 @@
> #
> # CONFIG_BISECT_EXEC (optional)
> # The config bisect is a separate program that comes with ktest.pl.
> -# By befault, it will look for:
> +# By default, it will look for:
> # `pwd`/config-bisect.pl # the location ktest.pl was executed from.
> # If it does not find it there, it will look for:
> # `dirname <ktest.pl>`/config-bisect.pl # The directory that holds ktest.pl
>
--
~Randy