2019-10-03 11:43:26

by Faiz Abbas

[permalink] [raw]
Subject: [PATCH] arm64: dts: ti: k3-am654-base-board: Add disable-wp for mmc0

MMC0_SDWP is not connected to the card. Indicate this by adding a
disable-wp flag.

Signed-off-by: Faiz Abbas <[email protected]>
---
arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 1102b84f853d..143474119328 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -221,6 +221,7 @@
bus-width = <8>;
non-removable;
ti,driver-strength-ohm = <50>;
+ disable-wp;
};

&dwc3_1 {
--
2.19.2


2019-10-19 08:21:38

by Tero Kristo

[permalink] [raw]
Subject: Re: [PATCH] arm64: dts: ti: k3-am654-base-board: Add disable-wp for mmc0

On 03/10/2019 14:42, Faiz Abbas wrote:
> MMC0_SDWP is not connected to the card. Indicate this by adding a
> disable-wp flag.
>
> Signed-off-by: Faiz Abbas <[email protected]>
> ---
> arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> index 1102b84f853d..143474119328 100644
> --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> @@ -221,6 +221,7 @@
> bus-width = <8>;
> non-removable;
> ti,driver-strength-ohm = <50>;
> + disable-wp;
> };
>
> &dwc3_1 {
>

Queuing up towards 5.5, thanks.

-Tero
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki