From: Colin Ian King <[email protected]>
Don't populate the const arrays on the stack but instead make them
static. Makes the object code smaller by 292 bytes.
Before:
text data bss dec hex filename
6988 3132 128 10248 2808 drivers/ata/pata_artop.o
After:
text data bss dec hex filename
6536 3292 128 9956 26e4 drivers/ata/pata_artop.o
(gcc version 9.2.1, amd64)
Signed-off-by: Colin Ian King <[email protected]>
---
V2: fix up commit message
---
drivers/ata/pata_artop.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 3aa006c5ed0c..6bd2228bb6ff 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -100,7 +100,7 @@ static void artop6210_load_piomode(struct ata_port *ap, struct ata_device *adev,
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int dn = adev->devno + 2 * ap->port_no;
- const u16 timing[2][5] = {
+ static const u16 timing[2][5] = {
{ 0x0000, 0x000A, 0x0008, 0x0303, 0x0301 },
{ 0x0700, 0x070A, 0x0708, 0x0403, 0x0401 }
@@ -154,7 +154,7 @@ static void artop6260_load_piomode (struct ata_port *ap, struct ata_device *adev
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
int dn = adev->devno + 2 * ap->port_no;
- const u8 timing[2][5] = {
+ static const u8 timing[2][5] = {
{ 0x00, 0x0A, 0x08, 0x33, 0x31 },
{ 0x70, 0x7A, 0x78, 0x43, 0x41 }
--
2.20.1
On 10/6/19 4:29 PM, Colin King wrote:
> From: Colin Ian King <[email protected]>
>
> Don't populate the const arrays on the stack but instead make them
> static. Makes the object code smaller by 292 bytes.
>
> Before:
> text data bss dec hex filename
> 6988 3132 128 10248 2808 drivers/ata/pata_artop.o
>
> After:
> text data bss dec hex filename
> 6536 3292 128 9956 26e4 drivers/ata/pata_artop.o
>
> (gcc version 9.2.1, amd64)
>
> Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Bartlomiej Zolnierkiewicz <[email protected]>
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
> ---
>
> V2: fix up commit message
>
> ---
> drivers/ata/pata_artop.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
> index 3aa006c5ed0c..6bd2228bb6ff 100644
> --- a/drivers/ata/pata_artop.c
> +++ b/drivers/ata/pata_artop.c
> @@ -100,7 +100,7 @@ static void artop6210_load_piomode(struct ata_port *ap, struct ata_device *adev,
> {
> struct pci_dev *pdev = to_pci_dev(ap->host->dev);
> int dn = adev->devno + 2 * ap->port_no;
> - const u16 timing[2][5] = {
> + static const u16 timing[2][5] = {
> { 0x0000, 0x000A, 0x0008, 0x0303, 0x0301 },
> { 0x0700, 0x070A, 0x0708, 0x0403, 0x0401 }
>
> @@ -154,7 +154,7 @@ static void artop6260_load_piomode (struct ata_port *ap, struct ata_device *adev
> {
> struct pci_dev *pdev = to_pci_dev(ap->host->dev);
> int dn = adev->devno + 2 * ap->port_no;
> - const u8 timing[2][5] = {
> + static const u8 timing[2][5] = {
> { 0x00, 0x0A, 0x08, 0x33, 0x31 },
> { 0x70, 0x7A, 0x78, 0x43, 0x41 }
>
On 10/6/19 8:29 AM, Colin King wrote:
> From: Colin Ian King <[email protected]>
>
> Don't populate the const arrays on the stack but instead make them
> static. Makes the object code smaller by 292 bytes.
>
> Before:
> text data bss dec hex filename
> 6988 3132 128 10248 2808 drivers/ata/pata_artop.o
>
> After:
> text data bss dec hex filename
> 6536 3292 128 9956 26e4 drivers/ata/pata_artop.o
>
> (gcc version 9.2.1, amd64)
Applied, thanks.
--
Jens Axboe