From: Ondrej Jirman <[email protected]>
Orange Pi 3 uses UART1 for bluetooth. Add pinconfigs so that we can use
them.
Signed-off-by: Ondrej Jirman <[email protected]>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index 67f920e0fc33..7657e816096b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -298,6 +298,16 @@
pins = "PH0", "PH1";
function = "uart0";
};
+
+ uart1_pins: uart1-pins {
+ pins = "PG6", "PG7";
+ function = "uart1";
+ };
+
+ uart1_rts_cts_pins: uart1-rts-cts-pins {
+ pins = "PG8", "PG9";
+ function = "uart1";
+ };
};
gic: interrupt-controller@3021000 {
--
2.23.0