Pointer arguments for 32bit ARC PROMs must reside in CKSEG0/1. While
the initial stack resides in CKSEG0 the first kernel thread stack
is already placed at a XKPHYS address, which ARC32 can't handle.
The workaround here is to use static variables, which are placed
into BSS and linked to a CKSEG0 address.
Signed-off-by: Thomas Bogendoerfer <[email protected]>
---
arch/mips/fw/arc/promlib.c | 25 +++++++++++++++++++++----
1 file changed, 21 insertions(+), 4 deletions(-)
diff --git a/arch/mips/fw/arc/promlib.c b/arch/mips/fw/arc/promlib.c
index be381307fbb0..5e9e840a9314 100644
--- a/arch/mips/fw/arc/promlib.c
+++ b/arch/mips/fw/arc/promlib.c
@@ -11,6 +11,21 @@
#include <asm/bcache.h>
#include <asm/setup.h>
+#if defined(CONFIG_64BIT) && defined(CONFIG_FW_ARC32)
+/*
+ * For 64bit kernels working with a 32bit ARC PROM pointer arguments
+ * for ARC calls need to reside in CKEG0/1. But as soon as the kernel
+ * switches to it's first kernel thread stack is set to an address in
+ * XKPHYS, so anything on stack can't be used anymore. This is solved
+ * by using a * static declartion variables are put into BSS, which is
+ * linked to a CKSEG0 address. Since this is only used on UP platforms
+ * there is not spinlock needed
+ */
+#define O32_STATIC static
+#else
+#define O32_STATIC
+#endif
+
/*
* IP22 boardcache is not compatible with board caches. Thus we disable it
* during romvec action. Since r4xx0.c is always compiled and linked with your
@@ -23,8 +38,10 @@
void prom_putchar(char c)
{
- ULONG cnt;
- CHAR it = c;
+ O32_STATIC ULONG cnt;
+ O32_STATIC CHAR it;
+
+ it = c;
bc_disable();
ArcWrite(1, &it, 1, &cnt);
@@ -33,8 +50,8 @@ void prom_putchar(char c)
char prom_getchar(void)
{
- ULONG cnt;
- CHAR c;
+ O32_STATIC ULONG cnt;
+ O32_STATIC CHAR c;
bc_disable();
ArcRead(0, &c, 1, &cnt);
--
2.16.4