Here are a few changes for the DPFE driver for Broadcom STB.
The changes and enhancements fall into a few categories:
- some code cleanup
- support for deferring firmware download if the rootfs isn't yet available
- introduce a "new v2 API", which is half way between the existing APIs
v2 (now called "old v2") and v3
Florian Fainelli (2):
memory: brcmstb: dpfe: Compute checksum at __send_command() time
memory: brcmstb: dpfe: Fixup API version/commands for 7211
Markus Mayer (6):
memory: brcmstb: dpfe: rename struct private_data
memory: brcmstb: dpfe: initialize priv->dev
memory: brcmstb: dpfe: add locking around DCPU enable/disable
memory: brcmstb: dpfe: move init_data into
brcmstb_dpfe_download_firmware()
memory: brcmstb: dpfe: pass *priv as argument to
brcmstb_dpfe_download_firmware()
memory: brcmstb: dpfe: support for deferred firmware download
drivers/memory/brcmstb_dpfe.c | 164 +++++++++++++++++++++-------------
1 file changed, 101 insertions(+), 63 deletions(-)
--
2.17.1
To avoid potential (future) conflicts with other data structures we
rename "struct private_data" to "struct brcmstb_dpfe_priv".
Signed-off-by: Markus Mayer <[email protected]>
---
drivers/memory/brcmstb_dpfe.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/drivers/memory/brcmstb_dpfe.c b/drivers/memory/brcmstb_dpfe.c
index 6827ed484750..0c4c01d2bf48 100644
--- a/drivers/memory/brcmstb_dpfe.c
+++ b/drivers/memory/brcmstb_dpfe.c
@@ -180,7 +180,7 @@ struct dpfe_api {
};
/* Things we need for as long as we are active. */
-struct private_data {
+struct brcmstb_dpfe_priv {
void __iomem *regs;
void __iomem *dmem;
void __iomem *imem;
@@ -343,7 +343,7 @@ static unsigned int get_msg_chksum(const u32 msg[], unsigned int max)
return sum;
}
-static void __iomem *get_msg_ptr(struct private_data *priv, u32 response,
+static void __iomem *get_msg_ptr(struct brcmstb_dpfe_priv *priv, u32 response,
char *buf, ssize_t *size)
{
unsigned int msg_type;
@@ -382,7 +382,7 @@ static void __iomem *get_msg_ptr(struct private_data *priv, u32 response,
return ptr;
}
-static void __finalize_command(struct private_data *priv)
+static void __finalize_command(struct brcmstb_dpfe_priv *priv)
{
unsigned int release_mbox;
@@ -395,7 +395,7 @@ static void __finalize_command(struct private_data *priv)
writel_relaxed(0, priv->regs + release_mbox);
}
-static int __send_command(struct private_data *priv, unsigned int cmd,
+static int __send_command(struct brcmstb_dpfe_priv *priv, unsigned int cmd,
u32 result[])
{
const u32 *msg = priv->dpfe_api->command[cmd];
@@ -517,7 +517,7 @@ static int __verify_firmware(struct init_data *init,
/* Verify checksum by reading back the firmware from co-processor RAM. */
static int __verify_fw_checksum(struct init_data *init,
- struct private_data *priv,
+ struct brcmstb_dpfe_priv *priv,
const struct dpfe_firmware_header *header,
u32 checksum)
{
@@ -578,7 +578,7 @@ static int brcmstb_dpfe_download_firmware(struct platform_device *pdev,
unsigned int dmem_size, imem_size;
struct device *dev = &pdev->dev;
bool is_big_endian = false;
- struct private_data *priv;
+ struct brcmstb_dpfe_priv *priv;
const struct firmware *fw;
const u32 *dmem, *imem;
const void *fw_blob;
@@ -647,7 +647,7 @@ static int brcmstb_dpfe_download_firmware(struct platform_device *pdev,
}
static ssize_t generic_show(unsigned int command, u32 response[],
- struct private_data *priv, char *buf)
+ struct brcmstb_dpfe_priv *priv, char *buf)
{
int ret;
@@ -665,7 +665,7 @@ static ssize_t show_info(struct device *dev, struct device_attribute *devattr,
char *buf)
{
u32 response[MSG_FIELD_MAX];
- struct private_data *priv;
+ struct brcmstb_dpfe_priv *priv;
unsigned int info;
ssize_t ret;
@@ -688,7 +688,7 @@ static ssize_t show_refresh(struct device *dev,
{
u32 response[MSG_FIELD_MAX];
void __iomem *info;
- struct private_data *priv;
+ struct brcmstb_dpfe_priv *priv;
u8 refresh, sr_abort, ppre, thermal_offs, tuf;
u32 mr4;
ssize_t ret;
@@ -721,7 +721,7 @@ static ssize_t store_refresh(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
u32 response[MSG_FIELD_MAX];
- struct private_data *priv;
+ struct brcmstb_dpfe_priv *priv;
void __iomem *info;
unsigned long val;
int ret;
@@ -747,7 +747,7 @@ static ssize_t show_vendor(struct device *dev, struct device_attribute *devattr,
char *buf)
{
u32 response[MSG_FIELD_MAX];
- struct private_data *priv;
+ struct brcmstb_dpfe_priv *priv;
void __iomem *info;
ssize_t ret;
u32 mr5, mr6, mr7, mr8, err;
@@ -778,7 +778,7 @@ static ssize_t show_dram(struct device *dev, struct device_attribute *devattr,
char *buf)
{
u32 response[MSG_FIELD_MAX];
- struct private_data *priv;
+ struct brcmstb_dpfe_priv *priv;
ssize_t ret;
u32 mr4, mr5, mr6, mr7, mr8, err;
@@ -808,7 +808,7 @@ static int brcmstb_dpfe_resume(struct platform_device *pdev)
static int brcmstb_dpfe_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct private_data *priv;
+ struct brcmstb_dpfe_priv *priv;
struct init_data init;
struct resource *res;
int ret;
@@ -867,7 +867,7 @@ static int brcmstb_dpfe_probe(struct platform_device *pdev)
static int brcmstb_dpfe_remove(struct platform_device *pdev)
{
- struct private_data *priv = dev_get_drvdata(&pdev->dev);
+ struct brcmstb_dpfe_priv *priv = dev_get_drvdata(&pdev->dev);
sysfs_remove_groups(&pdev->dev.kobj, priv->dpfe_api->sysfs_attrs);
--
2.17.1
Add missing initialization of priv->dev. It is only used in an
emergency error message that is very unlikely to ever occur, which is
how this has remained unnoticed.
Signed-off-by: Markus Mayer <[email protected]>
---
drivers/memory/brcmstb_dpfe.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/memory/brcmstb_dpfe.c b/drivers/memory/brcmstb_dpfe.c
index 0c4c01d2bf48..2ef3e365c1b5 100644
--- a/drivers/memory/brcmstb_dpfe.c
+++ b/drivers/memory/brcmstb_dpfe.c
@@ -817,6 +817,8 @@ static int brcmstb_dpfe_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
+ priv->dev = dev;
+
mutex_init(&priv->lock);
platform_set_drvdata(pdev, priv);
--
2.17.1
To ensure consistency, we add locking primitives inside the DCPU enable
and disable routines.
Signed-off-by: Markus Mayer <[email protected]>
---
drivers/memory/brcmstb_dpfe.c | 31 +++++++++++++++++++++----------
1 file changed, 21 insertions(+), 10 deletions(-)
diff --git a/drivers/memory/brcmstb_dpfe.c b/drivers/memory/brcmstb_dpfe.c
index 2ef3e365c1b5..c10c24a76729 100644
--- a/drivers/memory/brcmstb_dpfe.c
+++ b/drivers/memory/brcmstb_dpfe.c
@@ -290,32 +290,41 @@ static const struct dpfe_api dpfe_api_v3 = {
},
};
-static bool is_dcpu_enabled(void __iomem *regs)
+static bool is_dcpu_enabled(struct brcmstb_dpfe_priv *priv)
{
u32 val;
- val = readl_relaxed(regs + REG_DCPU_RESET);
+ mutex_lock(&priv->lock);
+ val = readl_relaxed(priv->regs + REG_DCPU_RESET);
+ mutex_unlock(&priv->lock);
return !(val & DCPU_RESET_MASK);
}
-static void __disable_dcpu(void __iomem *regs)
+static void __disable_dcpu(struct brcmstb_dpfe_priv *priv)
{
u32 val;
- if (!is_dcpu_enabled(regs))
+ if (!is_dcpu_enabled(priv))
return;
+ mutex_lock(&priv->lock);
+
/* Put DCPU in reset if it's running. */
- val = readl_relaxed(regs + REG_DCPU_RESET);
+ val = readl_relaxed(priv->regs + REG_DCPU_RESET);
val |= (1 << DCPU_RESET_SHIFT);
- writel_relaxed(val, regs + REG_DCPU_RESET);
+ writel_relaxed(val, priv->regs + REG_DCPU_RESET);
+
+ mutex_unlock(&priv->lock);
}
-static void __enable_dcpu(void __iomem *regs)
+static void __enable_dcpu(struct brcmstb_dpfe_priv *priv)
{
+ void __iomem *regs = priv->regs;
u32 val;
+ mutex_lock(&priv->lock);
+
/* Clear mailbox registers. */
writel_relaxed(0, regs + REG_TO_DCPU_MBOX);
writel_relaxed(0, regs + REG_TO_HOST_MBOX);
@@ -329,6 +338,8 @@ static void __enable_dcpu(void __iomem *regs)
val = readl_relaxed(regs + REG_DCPU_RESET);
val &= ~(1 << DCPU_RESET_SHIFT);
writel_relaxed(val, regs + REG_DCPU_RESET);
+
+ mutex_unlock(&priv->lock);
}
static unsigned int get_msg_chksum(const u32 msg[], unsigned int max)
@@ -590,7 +601,7 @@ static int brcmstb_dpfe_download_firmware(struct platform_device *pdev,
* Skip downloading the firmware if the DCPU is already running and
* responding to commands.
*/
- if (is_dcpu_enabled(priv->regs)) {
+ if (is_dcpu_enabled(priv)) {
u32 response[MSG_FIELD_MAX];
ret = __send_command(priv, DPFE_CMD_GET_INFO, response);
@@ -615,7 +626,7 @@ static int brcmstb_dpfe_download_firmware(struct platform_device *pdev,
if (ret)
return -EFAULT;
- __disable_dcpu(priv->regs);
+ __disable_dcpu(priv);
is_big_endian = init->is_big_endian;
dmem_size = init->dmem_len;
@@ -641,7 +652,7 @@ static int brcmstb_dpfe_download_firmware(struct platform_device *pdev,
if (ret)
return ret;
- __enable_dcpu(priv->regs);
+ __enable_dcpu(priv);
return 0;
}
--
2.17.1
Rather than declaring our init_data in several places and passing it as
parameter into brcmstb_dpfe_download_firmware(), we declare it inside
brcmstb_dpfe_download_firmware() instead.
Signed-off-by: Markus Mayer <[email protected]>
---
drivers/memory/brcmstb_dpfe.c | 21 +++++++++------------
1 file changed, 9 insertions(+), 12 deletions(-)
diff --git a/drivers/memory/brcmstb_dpfe.c b/drivers/memory/brcmstb_dpfe.c
index c10c24a76729..3b61e7108912 100644
--- a/drivers/memory/brcmstb_dpfe.c
+++ b/drivers/memory/brcmstb_dpfe.c
@@ -582,8 +582,7 @@ static int __write_firmware(u32 __iomem *mem, const u32 *fw,
return 0;
}
-static int brcmstb_dpfe_download_firmware(struct platform_device *pdev,
- struct init_data *init)
+static int brcmstb_dpfe_download_firmware(struct platform_device *pdev)
{
const struct dpfe_firmware_header *header;
unsigned int dmem_size, imem_size;
@@ -592,6 +591,7 @@ static int brcmstb_dpfe_download_firmware(struct platform_device *pdev,
struct brcmstb_dpfe_priv *priv;
const struct firmware *fw;
const u32 *dmem, *imem;
+ struct init_data init;
const void *fw_blob;
int ret;
@@ -622,15 +622,15 @@ static int brcmstb_dpfe_download_firmware(struct platform_device *pdev,
if (ret)
return ret;
- ret = __verify_firmware(init, fw);
+ ret = __verify_firmware(&init, fw);
if (ret)
return -EFAULT;
__disable_dcpu(priv);
- is_big_endian = init->is_big_endian;
- dmem_size = init->dmem_len;
- imem_size = init->imem_len;
+ is_big_endian = init.is_big_endian;
+ dmem_size = init.dmem_len;
+ imem_size = init.imem_len;
/* At the beginning of the firmware blob is a header. */
header = (struct dpfe_firmware_header *)fw->data;
@@ -648,7 +648,7 @@ static int brcmstb_dpfe_download_firmware(struct platform_device *pdev,
if (ret)
return ret;
- ret = __verify_fw_checksum(init, priv, header, init->chksum);
+ ret = __verify_fw_checksum(&init, priv, header, init.chksum);
if (ret)
return ret;
@@ -811,16 +811,13 @@ static ssize_t show_dram(struct device *dev, struct device_attribute *devattr,
static int brcmstb_dpfe_resume(struct platform_device *pdev)
{
- struct init_data init;
-
- return brcmstb_dpfe_download_firmware(pdev, &init);
+ return brcmstb_dpfe_download_firmware(pdev);
}
static int brcmstb_dpfe_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct brcmstb_dpfe_priv *priv;
- struct init_data init;
struct resource *res;
int ret;
@@ -864,7 +861,7 @@ static int brcmstb_dpfe_probe(struct platform_device *pdev)
return -ENOENT;
}
- ret = brcmstb_dpfe_download_firmware(pdev, &init);
+ ret = brcmstb_dpfe_download_firmware(pdev);
if (ret) {
dev_err(dev, "Couldn't download firmware -- %d\n", ret);
return ret;
--
2.17.1
Rather than passing a (struct platform_device *) to
brcmstb_dpfe_download_firmware(), we pass a (struct private_data *).
This is the more sensible thing to do.
Signed-off-by: Markus Mayer <[email protected]>
---
drivers/memory/brcmstb_dpfe.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/drivers/memory/brcmstb_dpfe.c b/drivers/memory/brcmstb_dpfe.c
index 3b61e7108912..f905a0076db7 100644
--- a/drivers/memory/brcmstb_dpfe.c
+++ b/drivers/memory/brcmstb_dpfe.c
@@ -582,21 +582,18 @@ static int __write_firmware(u32 __iomem *mem, const u32 *fw,
return 0;
}
-static int brcmstb_dpfe_download_firmware(struct platform_device *pdev)
+static int brcmstb_dpfe_download_firmware(struct brcmstb_dpfe_priv *priv)
{
const struct dpfe_firmware_header *header;
unsigned int dmem_size, imem_size;
- struct device *dev = &pdev->dev;
+ struct device *dev = priv->dev;
bool is_big_endian = false;
- struct brcmstb_dpfe_priv *priv;
const struct firmware *fw;
const u32 *dmem, *imem;
struct init_data init;
const void *fw_blob;
int ret;
- priv = platform_get_drvdata(pdev);
-
/*
* Skip downloading the firmware if the DCPU is already running and
* responding to commands.
@@ -811,7 +808,9 @@ static ssize_t show_dram(struct device *dev, struct device_attribute *devattr,
static int brcmstb_dpfe_resume(struct platform_device *pdev)
{
- return brcmstb_dpfe_download_firmware(pdev);
+ struct brcmstb_dpfe_priv *priv = platform_get_drvdata(pdev);
+
+ return brcmstb_dpfe_download_firmware(priv);
}
static int brcmstb_dpfe_probe(struct platform_device *pdev)
@@ -861,7 +860,7 @@ static int brcmstb_dpfe_probe(struct platform_device *pdev)
return -ENOENT;
}
- ret = brcmstb_dpfe_download_firmware(pdev);
+ ret = brcmstb_dpfe_download_firmware(priv);
if (ret) {
dev_err(dev, "Couldn't download firmware -- %d\n", ret);
return ret;
--
2.17.1
We add support for deferred downloading of the DPFE firmware. It may be
necessary to do this if the root file system containing the firmware
image is not yet available at the time the driver's probe function is
being called.
Signed-off-by: Markus Mayer <[email protected]>
---
drivers/memory/brcmstb_dpfe.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/memory/brcmstb_dpfe.c b/drivers/memory/brcmstb_dpfe.c
index f905a0076db7..cf320302d2c0 100644
--- a/drivers/memory/brcmstb_dpfe.c
+++ b/drivers/memory/brcmstb_dpfe.c
@@ -614,10 +614,13 @@ static int brcmstb_dpfe_download_firmware(struct brcmstb_dpfe_priv *priv)
if (!priv->dpfe_api->fw_name)
return -ENODEV;
- ret = request_firmware(&fw, priv->dpfe_api->fw_name, dev);
- /* request_firmware() prints its own error messages. */
+ ret = firmware_request_nowarn(&fw, priv->dpfe_api->fw_name, dev);
+ /*
+ * Defer the firmware download if the firmware file couldn't be found.
+ * The root file system may not be available yet.
+ */
if (ret)
- return ret;
+ return (ret == -ENOENT) ? -EPROBE_DEFER : ret;
ret = __verify_firmware(&init, fw);
if (ret)
@@ -862,7 +865,8 @@ static int brcmstb_dpfe_probe(struct platform_device *pdev)
ret = brcmstb_dpfe_download_firmware(priv);
if (ret) {
- dev_err(dev, "Couldn't download firmware -- %d\n", ret);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Couldn't download firmware -- %d\n", ret);
return ret;
}
--
2.17.1
From: Florian Fainelli <[email protected]>
Instead of pre-computing the checksum, do it at the time we send the
command, this reduces the possibility of introducing errors as well as
limits the amount of code necessary while adding new commands and/or new
API versions. The MSG_CHKSUM enumeration value is no longer necessary
and is removed.
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Markus Mayer <[email protected]>
---
drivers/memory/brcmstb_dpfe.c | 23 ++++++++++-------------
1 file changed, 10 insertions(+), 13 deletions(-)
diff --git a/drivers/memory/brcmstb_dpfe.c b/drivers/memory/brcmstb_dpfe.c
index cf320302d2c0..7c6e85ad25a7 100644
--- a/drivers/memory/brcmstb_dpfe.c
+++ b/drivers/memory/brcmstb_dpfe.c
@@ -127,7 +127,6 @@ enum dpfe_msg_fields {
MSG_COMMAND,
MSG_ARG_COUNT,
MSG_ARG0,
- MSG_CHKSUM,
MSG_FIELD_MAX = 16 /* Max number of arguments */
};
@@ -243,21 +242,18 @@ static const struct dpfe_api dpfe_api_v2 = {
[MSG_COMMAND] = 1,
[MSG_ARG_COUNT] = 1,
[MSG_ARG0] = 1,
- [MSG_CHKSUM] = 4,
},
[DPFE_CMD_GET_REFRESH] = {
[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
[MSG_COMMAND] = 2,
[MSG_ARG_COUNT] = 1,
[MSG_ARG0] = 1,
- [MSG_CHKSUM] = 5,
},
[DPFE_CMD_GET_VENDOR] = {
[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
[MSG_COMMAND] = 2,
[MSG_ARG_COUNT] = 1,
[MSG_ARG0] = 2,
- [MSG_CHKSUM] = 6,
},
}
};
@@ -273,18 +269,11 @@ static const struct dpfe_api dpfe_api_v3 = {
[MSG_COMMAND] = 0x0101,
[MSG_ARG_COUNT] = 1,
[MSG_ARG0] = 1,
- [MSG_CHKSUM] = 0x104,
},
[DPFE_CMD_GET_REFRESH] = {
[MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
[MSG_COMMAND] = 0x0202,
[MSG_ARG_COUNT] = 0,
- /*
- * This is a bit ugly. Without arguments, the checksum
- * follows right after the argument count and not at
- * offset MSG_CHKSUM.
- */
- [MSG_ARG0] = 0x203,
},
/* There's no GET_VENDOR command in API v3. */
},
@@ -432,9 +421,17 @@ static int __send_command(struct brcmstb_dpfe_priv *priv, unsigned int cmd,
return -ETIMEDOUT;
}
+ /* Compute checksum over the message */
+ chksum_idx = msg[MSG_ARG_COUNT] + MSG_ARG_COUNT + 1;
+ chksum = get_msg_chksum(msg, chksum_idx);
+
/* Write command and arguments to message area */
- for (i = 0; i < MSG_FIELD_MAX; i++)
- writel_relaxed(msg[i], regs + DCPU_MSG_RAM(i));
+ for (i = 0; i < MSG_FIELD_MAX; i++) {
+ if (i == chksum_idx)
+ writel_relaxed(chksum, regs + DCPU_MSG_RAM(i));
+ else
+ writel_relaxed(msg[i], regs + DCPU_MSG_RAM(i));
+ }
/* Tell DCPU there is a command waiting */
writel_relaxed(1, regs + REG_TO_DCPU_MBOX);
--
2.17.1
From: Florian Fainelli <[email protected]>
7211 uses a newer version of API v2 which is half way between what was
defined as API v3 and what used to be called API v2 but was used with
DPFE firmwares with major versions 1.x.x.x. Starting with **the new**
API v2, we are no longer getting loadable firmware images, so the
capability to load it is removed (like v3).
To avoid spreading more confusion, map 7268/7271/7278 to the old DPFE
API version 2, 7211 to the new API v2 and introduce the specific
commands for that, and leave newer versions to map to API v3.
Signed-off-by: Florian Fainelli <[email protected]>
Signed-off-by: Markus Mayer <[email protected]>
---
drivers/memory/brcmstb_dpfe.c | 44 ++++++++++++++++++++++++++++-------
1 file changed, 36 insertions(+), 8 deletions(-)
diff --git a/drivers/memory/brcmstb_dpfe.c b/drivers/memory/brcmstb_dpfe.c
index 7c6e85ad25a7..82b415be18d1 100644
--- a/drivers/memory/brcmstb_dpfe.c
+++ b/drivers/memory/brcmstb_dpfe.c
@@ -231,9 +231,13 @@ static struct attribute *dpfe_v3_attrs[] = {
};
ATTRIBUTE_GROUPS(dpfe_v3);
-/* API v2 firmware commands */
-static const struct dpfe_api dpfe_api_v2 = {
- .version = 2,
+/*
+ * Old API v2 firmware commands, as defined in the rev 0.61 specification, we
+ * use a version set to 1 to denote that it is not compatible with the new API
+ * v2 and onwards.
+ */
+static const struct dpfe_api dpfe_api_old_v2 = {
+ .version = 1,
.fw_name = "dpfe.bin",
.sysfs_attrs = dpfe_v2_groups,
.command = {
@@ -258,6 +262,30 @@ static const struct dpfe_api dpfe_api_v2 = {
}
};
+/*
+ * API v2 firmware commands, as defined in the rev 0.8 specification, named new
+ * v2 here
+ */
+static const struct dpfe_api dpfe_api_new_v2 = {
+ .version = 2,
+ .fw_name = NULL, /* We expect the firmware to have been downloaded! */
+ .sysfs_attrs = dpfe_v2_groups,
+ .command = {
+ [DPFE_CMD_GET_INFO] = {
+ [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+ [MSG_COMMAND] = 0x101,
+ },
+ [DPFE_CMD_GET_REFRESH] = {
+ [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+ [MSG_COMMAND] = 0x201,
+ },
+ [DPFE_CMD_GET_VENDOR] = {
+ [MSG_HEADER] = DPFE_MSG_TYPE_COMMAND,
+ [MSG_COMMAND] = 0x202,
+ },
+ }
+};
+
/* API v3 firmware commands */
static const struct dpfe_api dpfe_api_v3 = {
.version = 3,
@@ -390,7 +418,7 @@ static void __finalize_command(struct brcmstb_dpfe_priv *priv)
* It depends on the API version which MBOX register we have to write to
* to signal we are done.
*/
- release_mbox = (priv->dpfe_api->version < 3)
+ release_mbox = (priv->dpfe_api->version < 2)
? REG_TO_HOST_MBOX : REG_TO_DCPU_MBOX;
writel_relaxed(0, priv->regs + release_mbox);
}
@@ -886,10 +914,10 @@ static int brcmstb_dpfe_remove(struct platform_device *pdev)
static const struct of_device_id brcmstb_dpfe_of_match[] = {
/* Use legacy API v2 for a select number of chips */
- { .compatible = "brcm,bcm7268-dpfe-cpu", .data = &dpfe_api_v2 },
- { .compatible = "brcm,bcm7271-dpfe-cpu", .data = &dpfe_api_v2 },
- { .compatible = "brcm,bcm7278-dpfe-cpu", .data = &dpfe_api_v2 },
- { .compatible = "brcm,bcm7211-dpfe-cpu", .data = &dpfe_api_v2 },
+ { .compatible = "brcm,bcm7268-dpfe-cpu", .data = &dpfe_api_old_v2 },
+ { .compatible = "brcm,bcm7271-dpfe-cpu", .data = &dpfe_api_old_v2 },
+ { .compatible = "brcm,bcm7278-dpfe-cpu", .data = &dpfe_api_old_v2 },
+ { .compatible = "brcm,bcm7211-dpfe-cpu", .data = &dpfe_api_new_v2 },
/* API v3 is the default going forward */
{ .compatible = "brcm,dpfe-cpu", .data = &dpfe_api_v3 },
{}
--
2.17.1
On 10/15/19 3:45 PM, Markus Mayer wrote:
> Here are a few changes for the DPFE driver for Broadcom STB.
>
> The changes and enhancements fall into a few categories:
>
> - some code cleanup
> - support for deferring firmware download if the rootfs isn't yet available
> - introduce a "new v2 API", which is half way between the existing APIs
> v2 (now called "old v2") and v3
>
Series applied to drivers/next, thanks Markus!
> Florian Fainelli (2):
> memory: brcmstb: dpfe: Compute checksum at __send_command() time
> memory: brcmstb: dpfe: Fixup API version/commands for 7211
>
> Markus Mayer (6):
> memory: brcmstb: dpfe: rename struct private_data
> memory: brcmstb: dpfe: initialize priv->dev
> memory: brcmstb: dpfe: add locking around DCPU enable/disable
> memory: brcmstb: dpfe: move init_data into
> brcmstb_dpfe_download_firmware()
> memory: brcmstb: dpfe: pass *priv as argument to
> brcmstb_dpfe_download_firmware()
> memory: brcmstb: dpfe: support for deferred firmware download
>
> drivers/memory/brcmstb_dpfe.c | 164 +++++++++++++++++++++-------------
> 1 file changed, 101 insertions(+), 63 deletions(-)
>
--
Florian