2019-10-22 04:37:20

by Andrey Smirnov

[permalink] [raw]
Subject: [PATCH v2] ARM: imx: Drop imx_anatop_usb_chrg_detect_disable()

With commit b5bbe2235361 ("usb: phy: mxs: Disable external charger
detect in mxs_phy_hw_init()") in tree all of the necessary charger
setup is done by the USB PHY driver which covers all of the affected
i.MX6 SoCs.

NOTE: imx_anatop_usb_chrg_detect_disable() was also called for i.MX7D,
but looking at its datasheet it appears to have a different USB PHY IP
block, so executing i.MX6 charger disable configuration seems
unnecessary.

Signed-off-by: Andrey Smirnov <[email protected]>
Cc: Chris Healy <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Peter Chen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---

Changes since [v1]:

- Scope of the patch reduced to remove only
imx_anatop_usb_chrg_detect_disable() instead of
imx_anatop_init()

[v1] lore.kernel.org/lkml/[email protected]

arch/arm/mach-imx/anatop.c | 20 +-------------------
1 file changed, 1 insertion(+), 19 deletions(-)

diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c
index 777d8c255501..8fb68c0ec34c 100644
--- a/arch/arm/mach-imx/anatop.c
+++ b/arch/arm/mach-imx/anatop.c
@@ -19,8 +19,6 @@
#define ANADIG_REG_2P5 0x130
#define ANADIG_REG_CORE 0x140
#define ANADIG_ANA_MISC0 0x150
-#define ANADIG_USB1_CHRG_DETECT 0x1b0
-#define ANADIG_USB2_CHRG_DETECT 0x210
#define ANADIG_DIGPROG 0x260
#define ANADIG_DIGPROG_IMX6SL 0x280
#define ANADIG_DIGPROG_IMX7D 0x800
@@ -33,8 +31,6 @@
#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x1000
/* Below MISC0_DISCON_HIGH_SNVS is only for i.MX6SL */
#define BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS 0x2000
-#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x80000
-#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x100000

static struct regmap *anatop;

@@ -96,16 +92,6 @@ void imx_anatop_post_resume(void)

}

-static void imx_anatop_usb_chrg_detect_disable(void)
-{
- regmap_write(anatop, ANADIG_USB1_CHRG_DETECT,
- BM_ANADIG_USB_CHRG_DETECT_EN_B
- | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
- regmap_write(anatop, ANADIG_USB2_CHRG_DETECT,
- BM_ANADIG_USB_CHRG_DETECT_EN_B |
- BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B);
-}
-
void __init imx_init_revision_from_anatop(void)
{
struct device_node *np;
@@ -171,10 +157,6 @@ void __init imx_init_revision_from_anatop(void)
void __init imx_anatop_init(void)
{
anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop");
- if (IS_ERR(anatop)) {
+ if (IS_ERR(anatop))
pr_err("%s: failed to find imx6q-anatop regmap!\n", __func__);
- return;
- }
-
- imx_anatop_usb_chrg_detect_disable();
}
--
2.21.0


2019-10-28 16:59:08

by Shawn Guo

[permalink] [raw]
Subject: Re: [PATCH v2] ARM: imx: Drop imx_anatop_usb_chrg_detect_disable()

On Mon, Oct 21, 2019 at 09:14:45PM -0700, Andrey Smirnov wrote:
> With commit b5bbe2235361 ("usb: phy: mxs: Disable external charger
> detect in mxs_phy_hw_init()") in tree all of the necessary charger
> setup is done by the USB PHY driver which covers all of the affected
> i.MX6 SoCs.
>
> NOTE: imx_anatop_usb_chrg_detect_disable() was also called for i.MX7D,
> but looking at its datasheet it appears to have a different USB PHY IP
> block, so executing i.MX6 charger disable configuration seems
> unnecessary.
>
> Signed-off-by: Andrey Smirnov <[email protected]>

Applied, thanks.