2019-10-25 07:38:21

by Thomas Bogendoerfer

[permalink] [raw]
Subject: [PATCH v2 1/2] MIPS: PCI: make phys_to_dma/dma_to_phys for pci-xtalk-bridge common

All platforms using pci-xtalk-bridge can share common phys_to_dma/
dma_to_phys function. So we move it form ip27 specific file to
pci-xtalk-bridge.c

Signed-off-by: Thomas Bogendoerfer <[email protected]>
---
arch/mips/pci/pci-ip27.c | 13 -------------
arch/mips/pci/pci-xtalk-bridge.c | 16 ++++++++++++++++
2 files changed, 16 insertions(+), 13 deletions(-)

diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index 0d2eb86e8a1e..8e26b120f994 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -14,19 +14,6 @@
#include <asm/sn/ioc3.h>
#include <asm/pci/bridge.h>

-dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct bridge_controller *bc = BRIDGE_CONTROLLER(pdev->bus);
-
- return bc->baddr + paddr;
-}
-
-phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
-{
- return dma_addr & ~(0xffUL << 56);
-}
-
#ifdef CONFIG_NUMA
int pcibus_to_node(struct pci_bus *bus)
{
diff --git a/arch/mips/pci/pci-xtalk-bridge.c b/arch/mips/pci/pci-xtalk-bridge.c
index 0dd5edb76cbb..b475cf5aef2f 100644
--- a/arch/mips/pci/pci-xtalk-bridge.c
+++ b/arch/mips/pci/pci-xtalk-bridge.c
@@ -22,6 +22,22 @@
#define CRC16_INIT 0
#define CRC16_VALID 0xb001

+/*
+ * Common phys<->dma mapping for platforms using pci xtalk bridge
+ */
+dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct bridge_controller *bc = BRIDGE_CONTROLLER(pdev->bus);
+
+ return bc->baddr + paddr;
+}
+
+phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr)
+{
+ return dma_addr & ~(0xffUL << 56);
+}
+
/*
* Most of the IOC3 PCI config register aren't present
* we emulate what is needed for a normal PCI enumeration
--
2.16.4


2019-10-25 08:25:11

by Thomas Bogendoerfer

[permalink] [raw]
Subject: [PATCH v2 2/2] MIPS: add support for SGI Octane (IP30)

This changeset adds support for SGI Octane/Octane2 workstations.

Signed-off-by: Thomas Bogendoerfer <[email protected]>
---
arch/mips/Kbuild.platforms | 1 +
arch/mips/Kconfig | 27 ++
.../include/asm/mach-ip30/cpu-feature-overrides.h | 83 ++++++
arch/mips/include/asm/mach-ip30/irq.h | 87 ++++++
.../mips/include/asm/mach-ip30/kernel-entry-init.h | 13 +
arch/mips/include/asm/mach-ip30/mangle-port.h | 22 ++
arch/mips/include/asm/mach-ip30/spaces.h | 20 ++
arch/mips/include/asm/mach-ip30/war.h | 26 ++
arch/mips/include/asm/sgi/heart.h | 272 +++++++++++++++++
arch/mips/sgi-ip30/Makefile | 9 +
arch/mips/sgi-ip30/Platform | 8 +
arch/mips/sgi-ip30/ip30-common.h | 9 +
arch/mips/sgi-ip30/ip30-console.c | 23 ++
arch/mips/sgi-ip30/ip30-irq.c | 328 +++++++++++++++++++++
arch/mips/sgi-ip30/ip30-power.c | 41 +++
arch/mips/sgi-ip30/ip30-setup.c | 138 +++++++++
arch/mips/sgi-ip30/ip30-smp.c | 149 ++++++++++
arch/mips/sgi-ip30/ip30-timer.c | 63 ++++
arch/mips/sgi-ip30/ip30-xtalk.c | 152 ++++++++++
19 files changed, 1471 insertions(+)
create mode 100644 arch/mips/include/asm/mach-ip30/cpu-feature-overrides.h
create mode 100644 arch/mips/include/asm/mach-ip30/irq.h
create mode 100644 arch/mips/include/asm/mach-ip30/kernel-entry-init.h
create mode 100644 arch/mips/include/asm/mach-ip30/mangle-port.h
create mode 100644 arch/mips/include/asm/mach-ip30/spaces.h
create mode 100644 arch/mips/include/asm/mach-ip30/war.h
create mode 100644 arch/mips/include/asm/sgi/heart.h
create mode 100644 arch/mips/sgi-ip30/Makefile
create mode 100644 arch/mips/sgi-ip30/Platform
create mode 100644 arch/mips/sgi-ip30/ip30-common.h
create mode 100644 arch/mips/sgi-ip30/ip30-console.c
create mode 100644 arch/mips/sgi-ip30/ip30-irq.c
create mode 100644 arch/mips/sgi-ip30/ip30-power.c
create mode 100644 arch/mips/sgi-ip30/ip30-setup.c
create mode 100644 arch/mips/sgi-ip30/ip30-smp.c
create mode 100644 arch/mips/sgi-ip30/ip30-timer.c
create mode 100644 arch/mips/sgi-ip30/ip30-xtalk.c

diff --git a/arch/mips/Kbuild.platforms b/arch/mips/Kbuild.platforms
index 0de839882106..17413b2d5fd3 100644
--- a/arch/mips/Kbuild.platforms
+++ b/arch/mips/Kbuild.platforms
@@ -30,6 +30,7 @@ platforms += ralink
platforms += rb532
platforms += sgi-ip22
platforms += sgi-ip27
+platforms += sgi-ip30
platforms += sgi-ip32
platforms += sibyte
platforms += sni
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 4d403be641bb..2ef3129cc4ad 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -727,6 +727,33 @@ config SGI_IP28
This is the SGI Indigo2 with R10000 processor. To compile a Linux
kernel that runs on these, say Y here.

+config SGI_IP30
+ bool "SGI IP30 (Octane/Octane2)"
+ select ARCH_HAS_PHYS_TO_DMA
+ select FW_ARC
+ select FW_ARC64
+ select BOOT_ELF64
+ select CEVT_R4K
+ select CSRC_R4K
+ select SYNC_R4K if SMP
+ select ZONE_DMA32
+ select HAVE_PCI
+ select IRQ_MIPS_CPU
+ select IRQ_DOMAIN_HIERARCHY
+ select NR_CPUS_DEFAULT_2
+ select PCI_DRIVERS_GENERIC
+ select PCI_XTALK_BRIDGE
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_HAS_CPU_R10000
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_SMP
+ select MIPS_L1_CACHE_SHIFT_7
+ select ARC_MEMORY
+ help
+ These are the SGI Octane and Octane2 graphics workstations. To
+ compile a Linux kernel that runs on these, say Y here.
+
config SGI_IP32
bool "SGI IP32 (O2)"
select ARC_MEMORY
diff --git a/arch/mips/include/asm/mach-ip30/cpu-feature-overrides.h b/arch/mips/include/asm/mach-ip30/cpu-feature-overrides.h
new file mode 100644
index 000000000000..cfa02f3d25df
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip30/cpu-feature-overrides.h
@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * IP30/Octane cpu-features overrides.
+ *
+ * Copyright (C) 2003 Ralf Baechle <[email protected]>
+ * 2004-2007 Stanislaw Skowronek <[email protected]>
+ * 2009 Johannes Dickgreber <[email protected]>
+ * 2015 Joshua Kinard <[email protected]>
+ *
+ */
+#ifndef __ASM_MACH_IP30_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_IP30_CPU_FEATURE_OVERRIDES_H
+
+#include <asm/cpu.h>
+
+/*
+ * IP30 only supports R1[024]000 processors, all using the same config
+ */
+#define cpu_has_tlb 1
+#define cpu_has_tlbinv 0
+#define cpu_has_segments 0
+#define cpu_has_eva 0
+#define cpu_has_htw 0
+#define cpu_has_rixiex 0
+#define cpu_has_maar 0
+#define cpu_has_rw_llb 0
+#define cpu_has_3kex 0
+#define cpu_has_4kex 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_6k_cache 0
+#define cpu_has_8k_cache 0
+#define cpu_has_tx39_cache 0
+#define cpu_has_fpu 1
+#define cpu_has_nofpuex 0
+#define cpu_has_32fpr 1
+#define cpu_has_counter 1
+#define cpu_has_watch 1
+#define cpu_has_64bits 1
+#define cpu_has_divec 0
+#define cpu_has_vce 0
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_prefetch 1
+#define cpu_has_mcheck 0
+#define cpu_has_ejtag 0
+#define cpu_has_llsc 1
+#define cpu_has_mips16 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips3d 0
+#define cpu_has_smartmips 0
+#define cpu_has_rixi 0
+#define cpu_has_xpa 0
+#define cpu_has_vtag_icache 0
+#define cpu_has_dc_aliases 0
+#define cpu_has_ic_fills_f_dc 0
+
+#define cpu_icache_snoops_remote_store 1
+
+#define cpu_has_mips32r1 0
+#define cpu_has_mips32r2 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+#define cpu_has_mips32r6 0
+#define cpu_has_mips64r6 0
+
+#define cpu_has_dsp 0
+#define cpu_has_dsp2 0
+#define cpu_has_mipsmt 0
+#define cpu_has_userlocal 0
+#define cpu_has_inclusive_pcaches 1
+#define cpu_hwrena_impl_bits 0
+#define cpu_has_perf_cntr_intr_bit 0
+#define cpu_has_vz 0
+#define cpu_has_fre 0
+#define cpu_has_cdmm 0
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 64
+#define cpu_scache_line_size() 128
+
+#endif /* __ASM_MACH_IP30_CPU_FEATURE_OVERRIDES_H */
+
diff --git a/arch/mips/include/asm/mach-ip30/irq.h b/arch/mips/include/asm/mach-ip30/irq.h
new file mode 100644
index 000000000000..e5c3dd965266
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip30/irq.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * HEART IRQ defines
+ *
+ * Copyright (C) 2009 Johannes Dickgreber <[email protected]>
+ * 2014-2016 Joshua Kinard <[email protected]>
+ *
+ */
+
+#ifndef __ASM_MACH_IP30_IRQ_H
+#define __ASM_MACH_IP30_IRQ_H
+
+/*
+ * HEART has 64 hardware interrupts, but use 128 to leave room for a few
+ * software interrupts as well (such as the CPU timer interrupt.
+ */
+#define NR_IRQS 128
+
+extern void __init ip30_install_ipi(void);
+
+/*
+ * HEART has 64 interrupt vectors available to it, subdivided into five
+ * priority levels. They are numbered 0 to 63.
+ */
+#define HEART_NUM_IRQS 64
+
+/*
+ * These are the five interrupt priority levels and their corresponding
+ * CPU IPx interrupt pins.
+ *
+ * Level 4 - Error Interrupts.
+ * Level 3 - HEART timer interrupt.
+ * Level 2 - CPU IPI, CPU debug, power putton, general device interrupts.
+ * Level 1 - General device interrupts.
+ * Level 0 - General device GFX flow control interrupts.
+ */
+#define HEART_L4_INT_MASK 0xfff8000000000000ULL /* IP6 */
+#define HEART_L3_INT_MASK 0x0004000000000000ULL /* IP5 */
+#define HEART_L2_INT_MASK 0x0003ffff00000000ULL /* IP4 */
+#define HEART_L1_INT_MASK 0x00000000ffff0000ULL /* IP3 */
+#define HEART_L0_INT_MASK 0x000000000000ffffULL /* IP2 */
+
+/* HEART L0 Interrupts (Low Priority) */
+#define HEART_L0_INT_GENERIC 0
+#define HEART_L0_INT_FLOW_CTRL_HWTR_0 1
+#define HEART_L0_INT_FLOW_CTRL_HWTR_1 2
+
+/* HEART L2 Interrupts (High Priority) */
+#define HEART_L2_INT_RESCHED_CPU_0 46
+#define HEART_L2_INT_RESCHED_CPU_1 47
+#define HEART_L2_INT_CALL_CPU_0 48
+#define HEART_L2_INT_CALL_CPU_1 49
+
+/* HEART L3 Interrupts (Compare/Counter Timer) */
+#define HEART_L3_INT_TIMER 50
+
+/* HEART L4 Interrupts (Errors) */
+#define HEART_L4_INT_XWID_ERR_9 51
+#define HEART_L4_INT_XWID_ERR_A 52
+#define HEART_L4_INT_XWID_ERR_B 53
+#define HEART_L4_INT_XWID_ERR_C 54
+#define HEART_L4_INT_XWID_ERR_D 55
+#define HEART_L4_INT_XWID_ERR_E 56
+#define HEART_L4_INT_XWID_ERR_F 57
+#define HEART_L4_INT_XWID_ERR_XBOW 58
+#define HEART_L4_INT_CPU_BUS_ERR_0 59
+#define HEART_L4_INT_CPU_BUS_ERR_1 60
+#define HEART_L4_INT_CPU_BUS_ERR_2 61
+#define HEART_L4_INT_CPU_BUS_ERR_3 62
+#define HEART_L4_INT_HEART_EXCP 63
+
+/*
+ * Power Switch is wired via BaseIO BRIDGE slot #6.
+ *
+ * ACFail is wired via BaseIO BRIDGE slot #7.
+ */
+#define IP30_POWER_IRQ HEART_L2_INT_POWER_BTN
+
+#include_next <irq.h>
+
+#define IP30_HEART_L0_IRQ (MIPS_CPU_IRQ_BASE + 2)
+#define IP30_HEART_L1_IRQ (MIPS_CPU_IRQ_BASE + 3)
+#define IP30_HEART_L2_IRQ (MIPS_CPU_IRQ_BASE + 4)
+#define IP30_HEART_TIMER_IRQ (MIPS_CPU_IRQ_BASE + 5)
+#define IP30_HEART_ERR_IRQ (MIPS_CPU_IRQ_BASE + 6)
+
+#endif /* __ASM_MACH_IP30_IRQ_H */
diff --git a/arch/mips/include/asm/mach-ip30/kernel-entry-init.h b/arch/mips/include/asm/mach-ip30/kernel-entry-init.h
new file mode 100644
index 000000000000..be0472c977d8
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip30/kernel-entry-init.h
@@ -0,0 +1,13 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __ASM_MACH_IP30_KERNEL_ENTRY_H
+#define __ASM_MACH_IP30_KERNEL_ENTRY_H
+
+ .macro kernel_entry_setup
+ .endm
+
+ .macro smp_slave_setup
+ move gp, a0
+ .endm
+
+#endif /* __ASM_MACH_IP30_KERNEL_ENTRY_H */
diff --git a/arch/mips/include/asm/mach-ip30/mangle-port.h b/arch/mips/include/asm/mach-ip30/mangle-port.h
new file mode 100644
index 000000000000..f3e1262a2d5e
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip30/mangle-port.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2003, 2004 Ralf Baechle
+ */
+#ifndef __ASM_MACH_IP30_MANGLE_PORT_H
+#define __ASM_MACH_IP30_MANGLE_PORT_H
+
+#define __swizzle_addr_b(port) ((port)^3)
+#define __swizzle_addr_w(port) ((port)^2)
+#define __swizzle_addr_l(port) (port)
+#define __swizzle_addr_q(port) (port)
+
+#define ioswabb(a, x) (x)
+#define __mem_ioswabb(a, x) (x)
+#define ioswabw(a, x) (x)
+#define __mem_ioswabw(a, x) cpu_to_le16(x)
+#define ioswabl(a, x) (x)
+#define __mem_ioswabl(a, x) cpu_to_le32(x)
+#define ioswabq(a, x) (x)
+#define __mem_ioswabq(a, x) cpu_to_le64(x)
+
+#endif /* __ASM_MACH_IP30_MANGLE_PORT_H */
diff --git a/arch/mips/include/asm/mach-ip30/spaces.h b/arch/mips/include/asm/mach-ip30/spaces.h
new file mode 100644
index 000000000000..c8a302dfbe05
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip30/spaces.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2016 Joshua Kinard <[email protected]>
+ *
+ */
+#ifndef _ASM_MACH_IP30_SPACES_H
+#define _ASM_MACH_IP30_SPACES_H
+
+/*
+ * Memory in IP30/Octane is offset 512MB in the physical address space.
+ */
+#define PHYS_OFFSET _AC(0x20000000, UL)
+
+#ifdef CONFIG_64BIT
+#define CAC_BASE _AC(0xA800000000000000, UL)
+#endif
+
+#include <asm/mach-generic/spaces.h>
+
+#endif /* _ASM_MACH_IP30_SPACES_H */
diff --git a/arch/mips/include/asm/mach-ip30/war.h b/arch/mips/include/asm/mach-ip30/war.h
new file mode 100644
index 000000000000..a98ba204f183
--- /dev/null
+++ b/arch/mips/include/asm/mach-ip30/war.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <[email protected]>
+ */
+#ifndef __ASM_MIPS_MACH_IP30_WAR_H
+#define __ASM_MIPS_MACH_IP30_WAR_H
+
+#define R4600_V1_INDEX_ICACHEOP_WAR 0
+#define R4600_V1_HIT_CACHEOP_WAR 0
+#define R4600_V2_HIT_CACHEOP_WAR 0
+#define MIPS_CACHE_SYNC_WAR 0
+#define BCM1250_M3_WAR 0
+#define SIBYTE_1956_WAR 0
+#define MIPS4K_ICACHE_REFILL_WAR 0
+#define MIPS34K_MISSED_ITLB_WAR 0
+#define R5432_CP0_INTERRUPT_WAR 0
+#define TX49XX_ICACHE_INDEX_INV_WAR 0
+#define ICACHE_REFILLS_WORKAROUND_WAR 0
+
+#ifdef CONFIG_CPU_R10000
+#define R10000_LLSC_WAR 1
+#else
+#define R10000_LLSC_WAR 0
+#endif
+
+#endif /* __ASM_MIPS_MACH_IP30_WAR_H */
diff --git a/arch/mips/include/asm/sgi/heart.h b/arch/mips/include/asm/sgi/heart.h
new file mode 100644
index 000000000000..c423221b4792
--- /dev/null
+++ b/arch/mips/include/asm/sgi/heart.h
@@ -0,0 +1,272 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * HEART chip definitions
+ *
+ * Copyright (C) 2004-2007 Stanislaw Skowronek <[email protected]>
+ * 2009 Johannes Dickgreber <[email protected]>
+ * 2007-2015 Joshua Kinard <[email protected]>
+ */
+#ifndef __ASM_SGI_HEART_H
+#define __ASM_SGI_HEART_H
+
+#include <linux/types.h>
+#include <linux/time.h>
+
+/*
+ * There are 8 DIMM slots on an IP30 system
+ * board, which are grouped into four banks
+ */
+#define HEART_MEMORY_BANKS 4
+
+/* HEART can support up to four CPUs */
+#define HEART_MAX_CPUS 4
+
+#define HEART_XKPHYS_BASE ((void *)(IO_BASE | 0x000000000ff00000ULL))
+
+/**
+ * struct ip30_heart_regs - struct that maps IP30 HEART registers.
+ * @mode: HEART_MODE - Purpose Unknown, machine reset called from here.
+ * @sdram_mode: HEART_SDRAM_MODE - purpose unknown.
+ * @mem_refresh: HEART_MEM_REF - purpose unknown.
+ * @mem_req_arb: HEART_MEM_REQ_ARB - purpose unknown.
+ * @mem_cfg.q: union for 64bit access to HEART_MEMCFG - 4x 64bit registers.
+ * @mem_cfg.l: union for 32bit access to HEART_MEMCFG - 8x 32bit registers.
+ * @fc_mode: HEART_FC_MODE - Purpose Unknown, possibly for GFX flow control.
+ * @fc_timer_limit: HEART_FC_TIMER_LIMIT - purpose unknown.
+ * @fc_addr: HEART_FC0_ADDR, HEART_FC1_ADDR - purpose unknown.
+ * @fc_credit_cnt: HEART_FC0_CR_CNT, HEART_FC1_CR_CNT - purpose unknown.
+ * @fc_timer: HEART_FC0_TIMER, HEART_FC1_TIMER - purpose unknown.
+ * @status: HEART_STATUS - HEART status information.
+ * @bus_err_addr: HEART_BERR_ADDR - likely contains addr of recent SIGBUS.
+ * @bus_err_misc: HEART_BERR_MISC - purpose unknown.
+ * @mem_err_addr: HEART_MEMERR_ADDR - likely contains addr of recent mem err.
+ * @mem_err_data: HEART_MEMERR_DATA - purpose unknown.
+ * @piur_acc_err: HEART_PIUR_ACC_ERR - likely for access err to HEART regs.
+ * @mlan_clock_div: HEART_MLAN_CLK_DIV - MicroLAN clock divider.
+ * @mlan_ctrl: HEART_MLAN_CTL - MicroLAN control.
+ * @__pad0: 0x0f40 bytes of padding -> next HEART register 0x01000.
+ * @undefined: Undefined/diag register, write to it triggers PIUR_ACC_ERR.
+ * @__pad1: 0xeff8 bytes of padding -> next HEART register 0x10000.
+ * @imr: HEART_IMR0 to HEART_IMR3 - per-cpu interrupt mask register.
+ * @set_isr: HEART_SET_ISR - set interrupt status register.
+ * @clear_isr: HEART_CLR_ISR - clear interrupt status register.
+ * @isr: HEART_ISR - interrupt status register (read-only).
+ * @imsr: HEART_IMSR - purpose unknown.
+ * @cause: HEART_CAUSE - HEART cause information.
+ * @__pad2: 0xffb8 bytes of padding -> next HEART register 0x20000.
+ * @count: HEART_COUNT - 52-bit counter.
+ * @__pad3: 0xfff8 bytes of padding -> next HEART register 0x30000.
+ * @compare: HEART_COMPARE - 24-bit compare.
+ * @__pad4: 0xfff8 bytes of padding -> next HEART register 0x40000.
+ * @trigger: HEART_TRIGGER - purpose unknown.
+ * @__pad5: 0xfff8 bytes of padding -> next HEART register 0x50000.
+ * @cpuid: HEART_PRID - contains CPU ID of CPU currently accessing HEART.
+ * @__pad6: 0xfff8 bytes of padding -> next HEART register 0x60000.
+ * @sync: HEART_SYNC - purpose unknown.
+ *
+ * HEART is the main system controller ASIC for IP30 system. It incorporates
+ * a memory controller, interrupt status/cause/set/clear management, basic
+ * timer with count/compare, and other functionality. For Linux, not all of
+ * HEART's functions are fully understood.
+ *
+ * Implementation note: All HEART registers are 64bits-wide, but the mem_cfg
+ * register only reports correct values if queried in 32bits. Hence the need
+ * for a union. Even though mem_cfg.l has 8 array slots, we only ever query
+ * up to 4 of those. IP30 has 8 DIMM slots arranged into 4 banks, w/ 2 DIMMs
+ * per bank. Each 32bit read accesses one of these banks. Perhaps HEART was
+ * designed to address up to 8 banks (16 DIMMs)? We may never know.
+ */
+struct ip30_heart_regs { /* 0x0ff00000 */
+ u64 mode; /* + 0x00000 */
+ /* Memory */
+ u64 sdram_mode; /* + 0x00008 */
+ u64 mem_refresh; /* + 0x00010 */
+ u64 mem_req_arb; /* + 0x00018 */
+ union {
+ u64 q[HEART_MEMORY_BANKS]; /* readq() */
+ u32 l[HEART_MEMORY_BANKS * 2]; /* readl() */
+ } mem_cfg; /* + 0x00020 */
+ /* Flow control (gfx?) */
+ u64 fc_mode; /* + 0x00040 */
+ u64 fc_timer_limit; /* + 0x00048 */
+ u64 fc_addr[2]; /* + 0x00050 */
+ u64 fc_credit_cnt[2]; /* + 0x00060 */
+ u64 fc_timer[2]; /* + 0x00070 */
+ /* Status */
+ u64 status; /* + 0x00080 */
+ /* Bus error */
+ u64 bus_err_addr; /* + 0x00088 */
+ u64 bus_err_misc; /* + 0x00090 */
+ /* Memory error */
+ u64 mem_err_addr; /* + 0x00098 */
+ u64 mem_err_data; /* + 0x000a0 */
+ /* Misc */
+ u64 piur_acc_err; /* + 0x000a8 */
+ u64 mlan_clock_div; /* + 0x000b0 */
+ u64 mlan_ctrl; /* + 0x000b8 */
+ u64 __pad0[0x01e8]; /* + 0x000c0 + 0x0f40 */
+ /* Undefined */
+ u64 undefined; /* + 0x01000 */
+ u64 __pad1[0x1dff]; /* + 0x01008 + 0xeff8 */
+ /* Interrupts */
+ u64 imr[HEART_MAX_CPUS]; /* + 0x10000 */
+ u64 set_isr; /* + 0x10020 */
+ u64 clear_isr; /* + 0x10028 */
+ u64 isr; /* + 0x10030 */
+ u64 imsr; /* + 0x10038 */
+ u64 cause; /* + 0x10040 */
+ u64 __pad2[0x1ff7]; /* + 0x10048 + 0xffb8 */
+ /* Timer */
+ u64 count; /* + 0x20000 */
+ u64 __pad3[0x1fff]; /* + 0x20008 + 0xfff8 */
+ u64 compare; /* + 0x30000 */
+ u64 __pad4[0x1fff]; /* + 0x30008 + 0xfff8 */
+ u64 trigger; /* + 0x40000 */
+ u64 __pad5[0x1fff]; /* + 0x40008 + 0xfff8 */
+ /* Misc */
+ u64 cpuid; /* + 0x50000 */
+ u64 __pad6[0x1fff]; /* + 0x50008 + 0xfff8 */
+ u64 sync; /* + 0x60000 */
+};
+
+
+/* For timer-related bits. */
+#define HEART_NS_PER_CYCLE 80
+#define HEART_CYCLES_PER_SEC (NSEC_PER_SEC / HEART_NS_PER_CYCLE)
+
+
+/*
+ * XXX: Everything below this comment will either go away or be cleaned
+ * up to fit in better with Linux. A lot of the bit definitions for
+ * HEART were derived from IRIX's sys/RACER/heart.h header file.
+ */
+
+/* HEART Masks */
+#define HEART_ATK_MASK 0x0007ffffffffffff /* HEART attack mask */
+#define HEART_ACK_ALL_MASK 0xffffffffffffffff /* Ack everything */
+#define HEART_CLR_ALL_MASK 0x0000000000000000 /* Clear all */
+#define HEART_BR_ERR_MASK 0x7ff8000000000000 /* BRIDGE error mask */
+#define HEART_CPU0_ERR_MASK 0x8ff8000000000000 /* CPU0 error mask */
+#define HEART_CPU1_ERR_MASK 0x97f8000000000000 /* CPU1 error mask */
+#define HEART_CPU2_ERR_MASK 0xa7f8000000000000 /* CPU2 error mask */
+#define HEART_CPU3_ERR_MASK 0xc7f8000000000000 /* CPU3 error mask */
+#define HEART_ERR_MASK 0x1ff /* HEART error mask */
+#define HEART_ERR_MASK_START 51 /* HEART error start */
+#define HEART_ERR_MASK_END 63 /* HEART error end */
+
+/* Bits in the HEART_MODE register. */
+#define HM_PROC_DISABLE_SHFT 60
+#define HM_PROC_DISABLE_MSK (0xfUL << HM_PROC_DISABLE_SHFT)
+#define HM_PROC_DISABLE(x) (0x1UL << (x) + HM_PROC_DISABLE_SHFT)
+#define HM_MAX_PSR (0x7UL << 57)
+#define HM_MAX_IOSR (0x7UL << 54)
+#define HM_MAX_PEND_IOSR (0x7UL << 51)
+#define HM_TRIG_SRC_SEL_MSK (0x7UL << 48)
+#define HM_TRIG_HEART_EXC (0x0UL << 48)
+#define HM_TRIG_REG_BIT (0x1UL << 48)
+#define HM_TRIG_SYSCLK (0x2UL << 48)
+#define HM_TRIG_MEMCLK_2X (0x3UL << 48)
+#define HM_TRIG_MEMCLK (0x4UL << 48)
+#define HM_TRIG_IOCLK (0x5UL << 48)
+#define HM_PIU_TEST_MODE (0xfUL << 40)
+#define HM_GP_FLAG_MSK (0xfUL << 36)
+#define HM_GP_FLAG(x) BIT((x) + 36)
+#define HM_MAX_PROC_HYST (0xfUL << 32)
+#define HM_LLP_WRST_AFTER_RST BIT(28)
+#define HM_LLP_LINK_RST BIT(27)
+#define HM_LLP_WARM_RST BIT(26)
+#define HM_COR_ECC_LCK BIT(25)
+#define HM_REDUCED_PWR BIT(24)
+#define HM_COLD_RST BIT(23)
+#define HM_SW_RST BIT(22)
+#define HM_MEM_FORCE_WR BIT(21)
+#define HM_DB_ERR_GEN BIT(20)
+#define HM_SB_ERR_GEN BIT(19)
+#define HM_CACHED_PIO_EN BIT(18)
+#define HM_CACHED_PROM_EN BIT(17)
+#define HM_PE_SYS_COR_ERE BIT(16)
+#define HM_GLOBAL_ECC_EN BIT(15)
+#define HM_IO_COH_EN BIT(14)
+#define HM_INT_EN BIT(13)
+#define HM_DATA_CHK_EN BIT(12)
+#define HM_REF_EN BIT(11)
+#define HM_BAD_SYSWR_ERE BIT(10)
+#define HM_BAD_SYSRD_ERE BIT(9)
+#define HM_SYSSTATE_ERE BIT(8)
+#define HM_SYSCMD_ERE BIT(7)
+#define HM_NCOR_SYS_ERE BIT(6)
+#define HM_COR_SYS_ERE BIT(5)
+#define HM_DATA_ELMNT_ERE BIT(4)
+#define HM_MEM_ADDR_PROC_ERE BIT(3)
+#define HM_MEM_ADDR_IO_ERE BIT(2)
+#define HM_NCOR_MEM_ERE BIT(1)
+#define HM_COR_MEM_ERE BIT(0)
+
+/* Bits in the HEART_MEM_REF register. */
+#define HEART_MEMREF_REFS(x) ((0xfUL & (x)) << 16)
+#define HEART_MEMREF_PERIOD(x) ((0xffffUL & (x)))
+#define HEART_MEMREF_REFS_VAL HEART_MEMREF_REFS(8)
+#define HEART_MEMREF_PERIOD_VAL HEART_MEMREF_PERIOD(0x4000)
+#define HEART_MEMREF_VAL (HEART_MEMREF_REFS_VAL | \
+ HEART_MEMREF_PERIOD_VAL)
+
+/* Bits in the HEART_MEM_REQ_ARB register. */
+#define HEART_MEMARB_IODIS (1 << 20)
+#define HEART_MEMARB_MAXPMWRQS (15 << 16)
+#define HEART_MEMARB_MAXPMRRQS (15 << 12)
+#define HEART_MEMARB_MAXPMRQS (15 << 8)
+#define HEART_MEMARB_MAXRRRQS (15 << 4)
+#define HEART_MEMARB_MAXGBRRQS (15)
+
+/* Bits in the HEART_MEMCFG<x> registers. */
+#define HEART_MEMCFG_VALID 0x80000000 /* Bank is valid */
+#define HEART_MEMCFG_DENSITY 0x01c00000 /* Mem density */
+#define HEART_MEMCFG_SIZE_MASK 0x003f0000 /* Mem size mask */
+#define HEART_MEMCFG_ADDR_MASK 0x000001ff /* Base addr mask */
+#define HEART_MEMCFG_SIZE_SHIFT 16 /* Mem size shift */
+#define HEART_MEMCFG_DENSITY_SHIFT 22 /* Density Shift */
+#define HEART_MEMCFG_UNIT_SHIFT 25 /* Unit Shift, 32MB */
+
+/* Bits in the HEART_STATUS register */
+#define HEART_STAT_HSTL_SDRV BIT(14)
+#define HEART_STAT_FC_CR_OUT(x) BIT((x) + 12)
+#define HEART_STAT_DIR_CNNCT BIT(11)
+#define HEART_STAT_TRITON BIT(10)
+#define HEART_STAT_R4K BIT(9)
+#define HEART_STAT_BIG_ENDIAN BIT(8)
+#define HEART_STAT_PROC_SHFT 4
+#define HEART_STAT_PROC_MSK (0xfUL << HEART_STAT_PROC_SHFT)
+#define HEART_STAT_PROC_ACTIVE(x) (0x1UL << ((x) + HEART_STAT_PROC_SHFT))
+#define HEART_STAT_WIDGET_ID 0xf
+
+/* Bits in the HEART_CAUSE register */
+#define HC_PE_SYS_COR_ERR_MSK (0xfUL << 60)
+#define HC_PE_SYS_COR_ERR(x) BIT((x) + 60)
+#define HC_PIOWDB_OFLOW BIT(44)
+#define HC_PIORWRB_OFLOW BIT(43)
+#define HC_PIUR_ACC_ERR BIT(42)
+#define HC_BAD_SYSWR_ERR BIT(41)
+#define HC_BAD_SYSRD_ERR BIT(40)
+#define HC_SYSSTATE_ERR_MSK (0xfUL << 36)
+#define HC_SYSSTATE_ERR(x) BIT((x) + 36)
+#define HC_SYSCMD_ERR_MSK (0xfUL << 32)
+#define HC_SYSCMD_ERR(x) BIT((x) + 32)
+#define HC_NCOR_SYSAD_ERR_MSK (0xfUL << 28)
+#define HC_NCOR_SYSAD_ERR(x) BIT((x) + 28)
+#define HC_COR_SYSAD_ERR_MSK (0xfUL << 24)
+#define HC_COR_SYSAD_ERR(x) BIT((x) + 24)
+#define HC_DATA_ELMNT_ERR_MSK (0xfUL << 20)
+#define HC_DATA_ELMNT_ERR(x) BIT((x) + 20)
+#define HC_WIDGET_ERR BIT(16)
+#define HC_MEM_ADDR_ERR_PROC_MSK (0xfUL << 4)
+#define HC_MEM_ADDR_ERR_PROC(x) BIT((x) + 4)
+#define HC_MEM_ADDR_ERR_IO BIT(2)
+#define HC_NCOR_MEM_ERR BIT(1)
+#define HC_COR_MEM_ERR BIT(0)
+
+extern struct ip30_heart_regs __iomem *heart_regs;
+
+#define heart_read ____raw_readq
+#define heart_write ____raw_writeq
+
+#endif /* __ASM_SGI_HEART_H */
diff --git a/arch/mips/sgi-ip30/Makefile b/arch/mips/sgi-ip30/Makefile
new file mode 100644
index 000000000000..18cf561b3d61
--- /dev/null
+++ b/arch/mips/sgi-ip30/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the IP30 specific kernel interface routines under Linux.
+#
+
+obj-y := ip30-irq.o ip30-power.o ip30-setup.o ip30-timer.o ip30-xtalk.o
+
+obj-$(CONFIG_EARLY_PRINTK) += ip30-console.o
+obj-$(CONFIG_SMP) += ip30-smp.o
diff --git a/arch/mips/sgi-ip30/Platform b/arch/mips/sgi-ip30/Platform
new file mode 100644
index 000000000000..2b5695c2049a
--- /dev/null
+++ b/arch/mips/sgi-ip30/Platform
@@ -0,0 +1,8 @@
+#
+# SGI-IP30 (Octane/Octane2)
+#
+ifdef CONFIG_SGI_IP30
+platform-$(CONFIG_SGI_IP30) += sgi-ip30/
+cflags-$(CONFIG_SGI_IP30) += -I$(srctree)/arch/mips/include/asm/mach-ip30
+load-$(CONFIG_SGI_IP30) += 0xa800000020004000
+endif
diff --git a/arch/mips/sgi-ip30/ip30-common.h b/arch/mips/sgi-ip30/ip30-common.h
new file mode 100644
index 000000000000..d2bcaee712f3
--- /dev/null
+++ b/arch/mips/sgi-ip30/ip30-common.h
@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __IP30_COMMON_H
+#define __IP30_COMMON_H
+
+extern struct plat_smp_ops ip30_smp_ops;
+extern void __init ip30_per_cpu_init(void);
+
+#endif /* __IP30_COMMON_H */
diff --git a/arch/mips/sgi-ip30/ip30-console.c b/arch/mips/sgi-ip30/ip30-console.c
new file mode 100644
index 000000000000..b91f8c4fdc78
--- /dev/null
+++ b/arch/mips/sgi-ip30/ip30-console.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/io.h>
+
+#include <asm/sn/ioc3.h>
+
+static inline struct ioc3_uartregs *console_uart(void)
+{
+ struct ioc3 *ioc3;
+
+ ioc3 = (struct ioc3 *)((void *)(0x900000001f600000));
+ return &ioc3->sregs.uarta;
+}
+
+void prom_putchar(char c)
+{
+ struct ioc3_uartregs *uart = console_uart();
+
+ while ((readb(&uart->iu_lsr) & 0x20) == 0)
+ cpu_relax();
+
+ writeb(c, &uart->iu_thr);
+}
diff --git a/arch/mips/sgi-ip30/ip30-irq.c b/arch/mips/sgi-ip30/ip30-irq.c
new file mode 100644
index 000000000000..d46655b914f1
--- /dev/null
+++ b/arch/mips/sgi-ip30/ip30-irq.c
@@ -0,0 +1,328 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ip30-irq.c: Highlevel interrupt handling for IP30 architecture.
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/percpu.h>
+#include <linux/spinlock.h>
+#include <linux/tick.h>
+#include <linux/types.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/sgi/heart.h>
+
+struct heart_irq_data {
+ u64 *irq_mask;
+ int cpu;
+};
+
+static DECLARE_BITMAP(heart_irq_map, HEART_NUM_IRQS);
+
+static DEFINE_PER_CPU(unsigned long, irq_enable_mask);
+
+static inline int heart_alloc_int(void)
+{
+ int bit;
+
+again:
+ bit = find_first_zero_bit(heart_irq_map, HEART_NUM_IRQS);
+ if (bit >= HEART_NUM_IRQS)
+ return -ENOSPC;
+
+ if (test_and_set_bit(bit, heart_irq_map))
+ goto again;
+
+ return bit;
+}
+
+static void ip30_error_irq(struct irq_desc *desc)
+{
+ u64 pending, mask, cause, error_irqs, err_reg;
+ int cpu = smp_processor_id();
+ int i;
+
+ pending = heart_read(&heart_regs->isr);
+ mask = heart_read(&heart_regs->imr[cpu]);
+ cause = heart_read(&heart_regs->cause);
+ error_irqs = (pending & HEART_L4_INT_MASK & mask);
+
+ /* Bail if there's nothing to process (how did we get here, then?) */
+ if (unlikely(!error_irqs))
+ return;
+
+ /* Prevent any of the error IRQs from firing again. */
+ heart_write(mask & ~(pending), &heart_regs->imr[cpu]);
+
+ /* Ack all error IRQs. */
+ heart_write(HEART_L4_INT_MASK, &heart_regs->clear_isr);
+
+ /*
+ * If we also have a cause value, then something happened, so loop
+ * through the error IRQs and report a "heart attack" for each one
+ * and print the value of the HEART cause register. This is really
+ * primitive right now, but it should hopefully work until a more
+ * robust error handling routine can be put together.
+ *
+ * Refer to heart.h for the HC_* macros to work out the cause
+ * that got us here.
+ */
+ if (cause) {
+ pr_alert("IP30: CPU%d: HEART ATTACK! ISR = 0x%.16llx, IMR = 0x%.16llx, CAUSE = 0x%.16llx\n",
+ cpu, pending, mask, cause);
+
+ if (cause & HC_COR_MEM_ERR) {
+ err_reg = heart_read(&heart_regs->mem_err_addr);
+ pr_alert(" HEART_MEMERR_ADDR = 0x%.16llx\n", err_reg);
+ }
+
+ /* i = 63; i >= 51; i-- */
+ for (i = HEART_ERR_MASK_END; i >= HEART_ERR_MASK_START; i--)
+ if ((pending >> i) & 1)
+ pr_alert(" HEART Error IRQ #%d\n", i);
+
+ /* XXX: Seems possible to loop forever here, so panic(). */
+ panic("IP30: Fatal Error !\n");
+ }
+
+ /* Unmask the error IRQs. */
+ heart_write(mask, &heart_regs->imr[cpu]);
+}
+
+static void ip30_normal_irq(struct irq_desc *desc)
+{
+ int cpu = smp_processor_id();
+ struct irq_domain *domain;
+ u64 pend, mask;
+ int irq;
+
+ pend = heart_read(&heart_regs->isr);
+ mask = (heart_read(&heart_regs->imr[cpu]) &
+ (HEART_L0_INT_MASK | HEART_L1_INT_MASK | HEART_L2_INT_MASK));
+
+ pend &= mask;
+ if (unlikely(!pend))
+ return;
+
+#ifdef CONFIG_SMP
+ if (pend & BIT_ULL(HEART_L2_INT_RESCHED_CPU_0)) {
+ heart_write(BIT_ULL(HEART_L2_INT_RESCHED_CPU_0),
+ &heart_regs->clear_isr);
+ scheduler_ipi();
+ } else if (pend & BIT_ULL(HEART_L2_INT_RESCHED_CPU_1)) {
+ heart_write(BIT_ULL(HEART_L2_INT_RESCHED_CPU_1),
+ &heart_regs->clear_isr);
+ scheduler_ipi();
+ } else if (pend & BIT_ULL(HEART_L2_INT_CALL_CPU_0)) {
+ heart_write(BIT_ULL(HEART_L2_INT_CALL_CPU_0),
+ &heart_regs->clear_isr);
+ generic_smp_call_function_interrupt();
+ } else if (pend & BIT_ULL(HEART_L2_INT_CALL_CPU_1)) {
+ heart_write(BIT_ULL(HEART_L2_INT_CALL_CPU_1),
+ &heart_regs->clear_isr);
+ generic_smp_call_function_interrupt();
+ } else
+#endif
+ {
+ domain = irq_desc_get_handler_data(desc);
+ irq = irq_linear_revmap(domain, __ffs(pend));
+ if (irq)
+ generic_handle_irq(irq);
+ else
+ spurious_interrupt();
+ }
+}
+
+static void ip30_ack_heart_irq(struct irq_data *d)
+{
+ heart_write(BIT_ULL(d->hwirq), &heart_regs->clear_isr);
+}
+
+static void ip30_mask_heart_irq(struct irq_data *d)
+{
+ struct heart_irq_data *hd = irq_data_get_irq_chip_data(d);
+ unsigned long *mask = &per_cpu(irq_enable_mask, hd->cpu);
+
+ clear_bit(d->hwirq, mask);
+ heart_write(*mask, &heart_regs->imr[hd->cpu]);
+}
+
+static void ip30_mask_and_ack_heart_irq(struct irq_data *d)
+{
+ struct heart_irq_data *hd = irq_data_get_irq_chip_data(d);
+ unsigned long *mask = &per_cpu(irq_enable_mask, hd->cpu);
+
+ clear_bit(d->hwirq, mask);
+ heart_write(*mask, &heart_regs->imr[hd->cpu]);
+ heart_write(BIT_ULL(d->hwirq), &heart_regs->clear_isr);
+}
+
+static void ip30_unmask_heart_irq(struct irq_data *d)
+{
+ struct heart_irq_data *hd = irq_data_get_irq_chip_data(d);
+ unsigned long *mask = &per_cpu(irq_enable_mask, hd->cpu);
+
+ set_bit(d->hwirq, mask);
+ heart_write(*mask, &heart_regs->imr[hd->cpu]);
+}
+
+static int ip30_set_heart_irq_affinity(struct irq_data *d,
+ const struct cpumask *mask, bool force)
+{
+ struct heart_irq_data *hd = irq_data_get_irq_chip_data(d);
+
+ if (!hd)
+ return -EINVAL;
+
+ if (irqd_is_started(d))
+ ip30_mask_and_ack_heart_irq(d);
+
+ hd->cpu = cpumask_first_and(mask, cpu_online_mask);
+
+ if (irqd_is_started(d))
+ ip30_unmask_heart_irq(d);
+
+ irq_data_update_effective_affinity(d, cpumask_of(hd->cpu));
+
+ return 0;
+}
+
+static struct irq_chip heart_irq_chip = {
+ .name = "HEART",
+ .irq_ack = ip30_ack_heart_irq,
+ .irq_mask = ip30_mask_heart_irq,
+ .irq_mask_ack = ip30_mask_and_ack_heart_irq,
+ .irq_unmask = ip30_unmask_heart_irq,
+ .irq_set_affinity = ip30_set_heart_irq_affinity,
+};
+
+static int heart_domain_alloc(struct irq_domain *domain, unsigned int virq,
+ unsigned int nr_irqs, void *arg)
+{
+ struct irq_alloc_info *info = arg;
+ struct heart_irq_data *hd;
+ int hwirq;
+
+ if (nr_irqs > 1 || !info)
+ return -EINVAL;
+
+ hd = kzalloc(sizeof(*hd), GFP_KERNEL);
+ if (!hd)
+ return -ENOMEM;
+
+ hwirq = heart_alloc_int();
+ if (hwirq < 0) {
+ kfree(hd);
+ return -EAGAIN;
+ }
+ irq_domain_set_info(domain, virq, hwirq, &heart_irq_chip, hd,
+ handle_level_irq, NULL, NULL);
+
+ return 0;
+}
+
+static void heart_domain_free(struct irq_domain *domain,
+ unsigned int virq, unsigned int nr_irqs)
+{
+ struct irq_data *irqd;
+
+ if (nr_irqs > 1)
+ return;
+
+ irqd = irq_domain_get_irq_data(domain, virq);
+ clear_bit(irqd->hwirq, heart_irq_map);
+ if (irqd && irqd->chip_data)
+ kfree(irqd->chip_data);
+}
+
+static const struct irq_domain_ops heart_domain_ops = {
+ .alloc = heart_domain_alloc,
+ .free = heart_domain_free,
+};
+
+void __init ip30_install_ipi(void)
+{
+ int cpu = smp_processor_id();
+ unsigned long *mask = &per_cpu(irq_enable_mask, cpu);
+
+ set_bit(HEART_L2_INT_RESCHED_CPU_0 + cpu, mask);
+ heart_write(BIT_ULL(HEART_L2_INT_RESCHED_CPU_0 + cpu),
+ &heart_regs->clear_isr);
+ set_bit(HEART_L2_INT_CALL_CPU_0 + cpu, mask);
+ heart_write(BIT_ULL(HEART_L2_INT_CALL_CPU_0 + cpu),
+ &heart_regs->clear_isr);
+
+ heart_write(*mask, &heart_regs->imr[cpu]);
+}
+
+void __init arch_init_irq(void)
+{
+ struct irq_domain *domain;
+ struct fwnode_handle *fn;
+ unsigned long *mask;
+ int i;
+
+ mips_cpu_irq_init();
+
+ /* Mask all IRQs. */
+ heart_write(HEART_CLR_ALL_MASK, &heart_regs->imr[0]);
+ heart_write(HEART_CLR_ALL_MASK, &heart_regs->imr[1]);
+ heart_write(HEART_CLR_ALL_MASK, &heart_regs->imr[2]);
+ heart_write(HEART_CLR_ALL_MASK, &heart_regs->imr[3]);
+
+ /* Ack everything. */
+ heart_write(HEART_ACK_ALL_MASK, &heart_regs->clear_isr);
+
+ /* Enable specific HEART error IRQs for each CPU. */
+ mask = &per_cpu(irq_enable_mask, 0);
+ *mask |= HEART_CPU0_ERR_MASK;
+ heart_write(*mask, &heart_regs->imr[0]);
+ mask = &per_cpu(irq_enable_mask, 1);
+ *mask |= HEART_CPU1_ERR_MASK;
+ heart_write(*mask, &heart_regs->imr[1]);
+
+ /*
+ * Some HEART bits are reserved by hardware or by software convention.
+ * Mark these as reserved right away so they won't be accidentally
+ * used later.
+ */
+ set_bit(HEART_L0_INT_GENERIC, heart_irq_map);
+ set_bit(HEART_L0_INT_FLOW_CTRL_HWTR_0, heart_irq_map);
+ set_bit(HEART_L0_INT_FLOW_CTRL_HWTR_1, heart_irq_map);
+ set_bit(HEART_L2_INT_RESCHED_CPU_0, heart_irq_map);
+ set_bit(HEART_L2_INT_RESCHED_CPU_1, heart_irq_map);
+ set_bit(HEART_L2_INT_CALL_CPU_0, heart_irq_map);
+ set_bit(HEART_L2_INT_CALL_CPU_1, heart_irq_map);
+ set_bit(HEART_L3_INT_TIMER, heart_irq_map);
+
+ /* Reserve the error interrupts (#51 to #63). */
+ for (i = HEART_L4_INT_XWID_ERR_9; i <= HEART_L4_INT_HEART_EXCP; i++)
+ set_bit(i, heart_irq_map);
+
+ fn = irq_domain_alloc_named_fwnode("HEART");
+ WARN_ON(fn == NULL);
+ if (!fn)
+ return;
+ domain = irq_domain_create_linear(fn, HEART_NUM_IRQS,
+ &heart_domain_ops, NULL);
+ WARN_ON(domain == NULL);
+ if (!domain)
+ return;
+
+ irq_set_default_host(domain);
+
+ irq_set_percpu_devid(IP30_HEART_L0_IRQ);
+ irq_set_chained_handler_and_data(IP30_HEART_L0_IRQ, ip30_normal_irq,
+ domain);
+ irq_set_percpu_devid(IP30_HEART_L1_IRQ);
+ irq_set_chained_handler_and_data(IP30_HEART_L1_IRQ, ip30_normal_irq,
+ domain);
+ irq_set_percpu_devid(IP30_HEART_L2_IRQ);
+ irq_set_chained_handler_and_data(IP30_HEART_L2_IRQ, ip30_normal_irq,
+ domain);
+ irq_set_percpu_devid(IP30_HEART_ERR_IRQ);
+ irq_set_chained_handler_and_data(IP30_HEART_ERR_IRQ, ip30_error_irq,
+ domain);
+}
diff --git a/arch/mips/sgi-ip30/ip30-power.c b/arch/mips/sgi-ip30/ip30-power.c
new file mode 100644
index 000000000000..120b3f3d5108
--- /dev/null
+++ b/arch/mips/sgi-ip30/ip30-power.c
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ip30-power.c: Software powerdown and reset handling for IP30 architecture.
+ *
+ * Copyright (C) 2004-2007 Stanislaw Skowronek <[email protected]>
+ * 2014 Joshua Kinard <[email protected]>
+ * 2009 Johannes Dickgreber <[email protected]>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/notifier.h>
+#include <linux/delay.h>
+#include <linux/rtc/ds1685.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+
+#include <asm/reboot.h>
+#include <asm/sgi/heart.h>
+
+static void __noreturn ip30_machine_restart(char *cmd)
+{
+ /*
+ * Execute HEART cold reset
+ * Yes, it's cold-HEARTed!
+ */
+ heart_write((heart_read(&heart_regs->mode) | HM_COLD_RST),
+ &heart_regs->mode);
+ unreachable();
+}
+
+static int __init ip30_reboot_setup(void)
+{
+ _machine_restart = ip30_machine_restart;
+
+ return 0;
+}
+
+subsys_initcall(ip30_reboot_setup);
diff --git a/arch/mips/sgi-ip30/ip30-setup.c b/arch/mips/sgi-ip30/ip30-setup.c
new file mode 100644
index 000000000000..44b1607e964d
--- /dev/null
+++ b/arch/mips/sgi-ip30/ip30-setup.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SGI IP30 miscellaneous setup bits.
+ *
+ * Copyright (C) 2004-2007 Stanislaw Skowronek <[email protected]>
+ * 2007 Joshua Kinard <[email protected]>
+ * 2009 Johannes Dickgreber <[email protected]>
+ */
+
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/percpu.h>
+#include <linux/memblock.h>
+
+#include <asm/smp-ops.h>
+#include <asm/sgialib.h>
+#include <asm/time.h>
+#include <asm/sgi/heart.h>
+
+#include "ip30-common.h"
+
+/* Structure of accessible HEART registers located in XKPHYS space. */
+struct ip30_heart_regs __iomem *heart_regs = HEART_XKPHYS_BASE;
+
+/*
+ * ARCS will report up to the first 1GB of
+ * memory if queried. Anything beyond that
+ * is marked as reserved.
+ */
+#define IP30_MAX_PROM_MEMORY _AC(0x40000000, UL)
+
+/*
+ * Memory in the Octane starts at 512MB
+ */
+#define IP30_MEMORY_BASE _AC(0x20000000, UL)
+
+/*
+ * If using ARCS to probe for memory, then
+ * remaining memory will start at this offset.
+ */
+#define IP30_REAL_MEMORY_START (IP30_MEMORY_BASE + IP30_MAX_PROM_MEMORY)
+
+#define MEM_SHIFT(x) ((x) >> 20)
+
+static void __init ip30_mem_init(void)
+{
+ unsigned long total_mem;
+ phys_addr_t addr;
+ phys_addr_t size;
+ u32 memcfg;
+ int i;
+
+ total_mem = 0;
+ for (i = 0; i < HEART_MEMORY_BANKS; i++) {
+ memcfg = __raw_readl(&heart_regs->mem_cfg.l[i]);
+ if (!(memcfg & HEART_MEMCFG_VALID))
+ continue;
+
+ addr = memcfg & HEART_MEMCFG_ADDR_MASK;
+ addr <<= HEART_MEMCFG_UNIT_SHIFT;
+ addr += IP30_MEMORY_BASE;
+ size = memcfg & HEART_MEMCFG_SIZE_MASK;
+ size >>= HEART_MEMCFG_SIZE_SHIFT;
+ size += 1;
+ size <<= HEART_MEMCFG_UNIT_SHIFT;
+
+ total_mem += size;
+
+ if (addr >= IP30_REAL_MEMORY_START)
+ memblock_free(addr, size);
+ else if ((addr + size) > IP30_REAL_MEMORY_START)
+ memblock_free(IP30_REAL_MEMORY_START,
+ size - IP30_MAX_PROM_MEMORY);
+ }
+ pr_info("Detected %luMB of physical memory.\n", MEM_SHIFT(total_mem));
+}
+
+/**
+ * ip30_cpu_time_init - platform time initialization.
+ */
+static void __init ip30_cpu_time_init(void)
+{
+ int cpu = smp_processor_id();
+ u64 heart_compare;
+ unsigned int start, end;
+ int time_diff;
+
+ heart_compare = (heart_read(&heart_regs->count) +
+ (HEART_CYCLES_PER_SEC / 10));
+ start = read_c0_count();
+ while ((heart_read(&heart_regs->count) - heart_compare) & 0x800000)
+ cpu_relax();
+
+ end = read_c0_count();
+ time_diff = (int)end - (int)start;
+ mips_hpt_frequency = time_diff * 10;
+ pr_info("IP30: CPU%d: %d MHz CPU detected.\n", cpu,
+ (mips_hpt_frequency * 2) / 1000000);
+}
+
+void __init ip30_per_cpu_init(void)
+{
+ /* Disable all interrupts. */
+ clear_c0_status(ST0_IM);
+
+ ip30_cpu_time_init();
+#ifdef CONFIG_SMP
+ ip30_install_ipi();
+#endif
+
+ enable_percpu_irq(IP30_HEART_L0_IRQ, IRQ_TYPE_NONE);
+ enable_percpu_irq(IP30_HEART_L1_IRQ, IRQ_TYPE_NONE);
+ enable_percpu_irq(IP30_HEART_L2_IRQ, IRQ_TYPE_NONE);
+ enable_percpu_irq(IP30_HEART_ERR_IRQ, IRQ_TYPE_NONE);
+}
+
+/**
+ * plat_mem_setup - despite the name, misc setup happens here.
+ */
+void __init plat_mem_setup(void)
+{
+ ip30_mem_init();
+
+ /* XXX: Hard lock on /sbin/init if this flag isn't specified. */
+ prom_flags |= PROM_FLAG_DONT_FREE_TEMP;
+
+#ifdef CONFIG_SMP
+ register_smp_ops(&ip30_smp_ops);
+#else
+ ip30_per_cpu_init();
+#endif
+
+ ioport_resource.start = 0;
+ ioport_resource.end = ~0UL;
+ set_io_port_base(IO_BASE);
+}
diff --git a/arch/mips/sgi-ip30/ip30-smp.c b/arch/mips/sgi-ip30/ip30-smp.c
new file mode 100644
index 000000000000..4bfe654602b1
--- /dev/null
+++ b/arch/mips/sgi-ip30/ip30-smp.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ip30-smp.c: SMP on IP30 architecture.
+ * Based off of the original IP30 SMP code, with inspiration from ip27-smp.c
+ * and smp-bmips.c.
+ *
+ * Copyright (C) 2005-2007 Stanislaw Skowronek <[email protected]>
+ * 2006-2007, 2014-2015 Joshua Kinard <[email protected]>
+ * 2009 Johannes Dickgreber <[email protected]>
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/sched/task_stack.h>
+
+#include <asm/time.h>
+#include <asm/sgi/heart.h>
+
+#include "ip30-common.h"
+
+#define MPCONF_MAGIC 0xbaddeed2
+#define MPCONF_ADDR 0xa800000000000600L
+#define MPCONF_SIZE 0x80
+#define MPCONF(x) (MPCONF_ADDR + (x) * MPCONF_SIZE)
+
+/* HEART can theoretically do 4 CPUs, but only 2 are physically possible */
+#define MP_NCPU 2
+
+struct mpconf {
+ u32 magic;
+ u32 prid;
+ u32 physid;
+ u32 virtid;
+ u32 scachesz;
+ u16 fanloads;
+ u16 res;
+ void *launch;
+ void *rendezvous;
+ u64 res2[3];
+ void *stackaddr;
+ void *lnch_parm;
+ void *rndv_parm;
+ u32 idleflag;
+};
+
+static void ip30_smp_send_ipi_single(int cpu, u32 action)
+{
+ int irq;
+
+ switch (action) {
+ case SMP_RESCHEDULE_YOURSELF:
+ irq = HEART_L2_INT_RESCHED_CPU_0;
+ break;
+ case SMP_CALL_FUNCTION:
+ irq = HEART_L2_INT_CALL_CPU_0;
+ break;
+ default:
+ panic("IP30: Unknown action value in %s!\n", __func__);
+ }
+
+ irq += cpu;
+
+ /* Poke the other CPU -- it's got mail! */
+ heart_write(BIT_ULL(irq), &heart_regs->set_isr);
+}
+
+static void ip30_smp_send_ipi_mask(const struct cpumask *mask, u32 action)
+{
+ u32 i;
+
+ for_each_cpu(i, mask)
+ ip30_smp_send_ipi_single(i, action);
+}
+
+static void __init ip30_smp_setup(void)
+{
+ int i;
+ int ncpu = 0;
+ struct mpconf *mpc;
+
+ init_cpu_possible(cpumask_of(0));
+
+ /* Scan the MPCONF structure and enumerate available CPUs. */
+ for (i = 0; i < MP_NCPU; i++) {
+ mpc = (struct mpconf *)MPCONF(i);
+ if (mpc->magic == MPCONF_MAGIC) {
+ set_cpu_possible(i, true);
+ __cpu_number_map[i] = ++ncpu;
+ __cpu_logical_map[ncpu] = i;
+ pr_info("IP30: Slot: %d, PrID: %.8x, PhyID: %d, VirtID: %d\n",
+ i, mpc->prid, mpc->physid, mpc->virtid);
+ }
+ }
+ pr_info("IP30: Detected %d CPU(s) present.\n", ncpu);
+
+ /*
+ * Set the coherency algorithm to '5' (cacheable coherent
+ * exclusive on write). This is needed on IP30 SMP, especially
+ * for R14000 CPUs, otherwise, instruction bus errors will
+ * occur upon reaching userland.
+ */
+ change_c0_config(CONF_CM_CMASK, CONF_CM_CACHABLE_COW);
+}
+
+static void __init ip30_smp_prepare_cpus(unsigned int max_cpus)
+{
+ /* nothing to do here */
+}
+
+static int __init ip30_smp_boot_secondary(int cpu, struct task_struct *idle)
+{
+ struct mpconf *mpc = (struct mpconf *)MPCONF(cpu);
+
+ /* Stack pointer (sp). */
+ mpc->stackaddr = (void *)__KSTK_TOS(idle);
+
+ /* Global pointer (gp). */
+ mpc->lnch_parm = task_thread_info(idle);
+
+ mb(); /* make sure stack and lparm are written */
+
+ /* Boot CPUx. */
+ mpc->launch = smp_bootstrap;
+
+ /* CPUx now executes smp_bootstrap, then ip30_smp_finish */
+ return 0;
+}
+
+static void __init ip30_smp_init_cpu(void)
+{
+ ip30_per_cpu_init();
+}
+
+static void __init ip30_smp_finish(void)
+{
+ enable_percpu_irq(get_c0_compare_int(), IRQ_TYPE_NONE);
+ local_irq_enable();
+}
+
+struct plat_smp_ops __read_mostly ip30_smp_ops = {
+ .send_ipi_single = ip30_smp_send_ipi_single,
+ .send_ipi_mask = ip30_smp_send_ipi_mask,
+ .smp_setup = ip30_smp_setup,
+ .prepare_cpus = ip30_smp_prepare_cpus,
+ .boot_secondary = ip30_smp_boot_secondary,
+ .init_secondary = ip30_smp_init_cpu,
+ .smp_finish = ip30_smp_finish,
+ .prepare_boot_cpu = ip30_smp_init_cpu,
+};
diff --git a/arch/mips/sgi-ip30/ip30-timer.c b/arch/mips/sgi-ip30/ip30-timer.c
new file mode 100644
index 000000000000..d13e105478ae
--- /dev/null
+++ b/arch/mips/sgi-ip30/ip30-timer.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ip30-timer.c: Clocksource/clockevent support for the
+ * HEART chip in SGI Octane (IP30) systems.
+ *
+ * Copyright (C) 2004-2007 Stanislaw Skowronek <[email protected]>
+ * Copyright (C) 2009 Johannes Dickgreber <[email protected]>
+ * Copyright (C) 2011 Joshua Kinard <[email protected]>
+ */
+
+#include <linux/clocksource.h>
+#include <linux/cpumask.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/percpu.h>
+#include <linux/sched_clock.h>
+
+#include <asm/time.h>
+#include <asm/cevt-r4k.h>
+#include <asm/sgi/heart.h>
+
+static u64 ip30_heart_counter_read(struct clocksource *cs)
+{
+ return heart_read(&heart_regs->count);
+}
+
+struct clocksource ip30_heart_clocksource = {
+ .name = "HEART",
+ .rating = 400,
+ .read = ip30_heart_counter_read,
+ .mask = CLOCKSOURCE_MASK(52),
+ .flags = (CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_VALID_FOR_HRES),
+};
+
+static u64 notrace ip30_heart_read_sched_clock(void)
+{
+ return heart_read(&heart_regs->count);
+}
+
+static void __init ip30_heart_clocksource_init(void)
+{
+ struct clocksource *cs = &ip30_heart_clocksource;
+
+ clocksource_register_hz(cs, HEART_CYCLES_PER_SEC);
+
+ sched_clock_register(ip30_heart_read_sched_clock, 52,
+ HEART_CYCLES_PER_SEC);
+}
+
+void __init plat_time_init(void)
+{
+ int irq = get_c0_compare_int();
+
+ cp0_timer_irq_installed = 1;
+ c0_compare_irqaction.percpu_dev_id = &mips_clockevent_device;
+ c0_compare_irqaction.flags &= ~IRQF_SHARED;
+ irq_set_handler(irq, handle_percpu_devid_irq);
+ irq_set_percpu_devid(irq);
+ setup_percpu_irq(irq, &c0_compare_irqaction);
+ enable_percpu_irq(irq, IRQ_TYPE_NONE);
+
+ ip30_heart_clocksource_init();
+}
diff --git a/arch/mips/sgi-ip30/ip30-xtalk.c b/arch/mips/sgi-ip30/ip30-xtalk.c
new file mode 100644
index 000000000000..8a2894645529
--- /dev/null
+++ b/arch/mips/sgi-ip30/ip30-xtalk.c
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * ip30-xtalk.c - Very basic Crosstalk (XIO) detection support.
+ * Copyright (C) 2004-2007 Stanislaw Skowronek <[email protected]>
+ * Copyright (C) 2009 Johannes Dickgreber <[email protected]>
+ * Copyright (C) 2007, 2014-2016 Joshua Kinard <[email protected]>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/sgi-w1.h>
+#include <linux/platform_data/xtalk-bridge.h>
+
+#include <asm/xtalk/xwidget.h>
+#include <asm/pci/bridge.h>
+
+#define IP30_SWIN_BASE(widget) \
+ (0x0000000010000000 | (((unsigned long)(widget)) << 24))
+
+#define IP30_RAW_SWIN_BASE(widget) (IO_BASE + IP30_SWIN_BASE(widget))
+
+#define IP30_SWIN_SIZE (1 << 24)
+
+#define IP30_WIDGET_XBOW _AC(0x0, UL) /* XBow is always 0 */
+#define IP30_WIDGET_HEART _AC(0x8, UL) /* HEART is always 8 */
+#define IP30_WIDGET_PCI_BASE _AC(0xf, UL) /* BaseIO PCI is always 15 */
+
+#define XTALK_NODEV 0xffffffff
+
+#define XBOW_REG_LINK_STAT_0 0x114
+#define XBOW_REG_LINK_BLK_SIZE 0x40
+#define XBOW_REG_LINK_ALIVE 0x80000000
+
+#define HEART_INTR_ADDR 0x00000080
+
+#define xtalk_read __raw_readl
+
+static void bridge_platform_create(int widget, int masterwid)
+{
+ struct xtalk_bridge_platform_data *bd;
+ struct sgi_w1_platform_data *wd;
+ struct platform_device *pdev;
+ struct resource w1_res;
+
+ wd = kzalloc(sizeof(*wd), GFP_KERNEL);
+ if (!wd)
+ goto no_mem;
+
+ snprintf(wd->dev_id, sizeof(wd->dev_id), "bridge-%012lx",
+ IP30_SWIN_BASE(widget));
+
+ memset(&w1_res, 0, sizeof(w1_res));
+ w1_res.start = IP30_SWIN_BASE(widget) +
+ offsetof(struct bridge_regs, b_nic);
+ w1_res.end = w1_res.start + 3;
+ w1_res.flags = IORESOURCE_MEM;
+
+ pdev = platform_device_alloc("sgi_w1", PLATFORM_DEVID_AUTO);
+ if (!pdev) {
+ kfree(wd);
+ goto no_mem;
+ }
+ platform_device_add_resources(pdev, &w1_res, 1);
+ platform_device_add_data(pdev, wd, sizeof(*wd));
+ platform_device_add(pdev);
+
+ bd = kzalloc(sizeof(*bd), GFP_KERNEL);
+ if (!bd)
+ goto no_mem;
+ pdev = platform_device_alloc("xtalk-bridge", PLATFORM_DEVID_AUTO);
+ if (!pdev) {
+ kfree(bd);
+ goto no_mem;
+ }
+
+ bd->bridge_addr = IP30_RAW_SWIN_BASE(widget);
+ bd->intr_addr = HEART_INTR_ADDR;
+ bd->nasid = 0;
+ bd->masterwid = masterwid;
+
+ bd->mem.name = "Bridge PCI MEM";
+ bd->mem.start = IP30_SWIN_BASE(widget) + BRIDGE_DEVIO0;
+ bd->mem.end = IP30_SWIN_BASE(widget) + IP30_SWIN_SIZE - 1;
+ bd->mem.flags = IORESOURCE_MEM;
+ bd->mem_offset = IP30_SWIN_BASE(widget);
+
+ bd->io.name = "Bridge PCI IO";
+ bd->io.start = IP30_SWIN_BASE(widget) + BRIDGE_DEVIO0;
+ bd->io.end = IP30_SWIN_BASE(widget) + IP30_SWIN_SIZE - 1;
+ bd->io.flags = IORESOURCE_IO;
+ bd->io_offset = IP30_SWIN_BASE(widget);
+
+ platform_device_add_data(pdev, bd, sizeof(*bd));
+ platform_device_add(pdev);
+ pr_info("xtalk:%x bridge widget\n", widget);
+ return;
+
+no_mem:
+ pr_warn("xtalk:%x bridge create out of memory\n", widget);
+}
+
+static unsigned int __init xbow_widget_active(s8 wid)
+{
+ unsigned int link_stat;
+
+ link_stat = xtalk_read((void *)(IP30_RAW_SWIN_BASE(IP30_WIDGET_XBOW) +
+ XBOW_REG_LINK_STAT_0 +
+ XBOW_REG_LINK_BLK_SIZE *
+ (wid - 8)));
+
+ return (link_stat & XBOW_REG_LINK_ALIVE) ? 1 : 0;
+}
+
+static void __init xtalk_init_widget(s8 wid, s8 masterwid)
+{
+ xwidget_part_num_t partnum;
+ widgetreg_t widget_id;
+
+ if (!xbow_widget_active(wid))
+ return;
+
+ widget_id = xtalk_read((void *)(IP30_RAW_SWIN_BASE(wid) + WIDGET_ID));
+
+ partnum = XWIDGET_PART_NUM(widget_id);
+
+ switch (partnum) {
+ case BRIDGE_WIDGET_PART_NUM:
+ case XBRIDGE_WIDGET_PART_NUM:
+ bridge_platform_create(wid, masterwid);
+ break;
+ default:
+ pr_info("xtalk:%x unknown widget (0x%x)\n", wid, partnum);
+ break;
+ }
+}
+
+static int __init ip30_xtalk_init(void)
+{
+ int i;
+
+ /*
+ * Walk widget IDs backwards so that BaseIO is probed first. This
+ * ensures that the BaseIO IOC3 is always detected as eth0.
+ */
+ for (i = IP30_WIDGET_PCI_BASE; i > IP30_WIDGET_HEART; i--)
+ xtalk_init_widget(i, IP30_WIDGET_HEART);
+
+ return 0;
+}
+
+arch_initcall(ip30_xtalk_init);
--
2.16.4

2019-11-01 23:28:48

by Paul Burton

[permalink] [raw]
Subject: Re: [PATCH v2 1/2] MIPS: PCI: make phys_to_dma/dma_to_phys for pci-xtalk-bridge common

Hello,

Thomas Bogendoerfer wrote:
> All platforms using pci-xtalk-bridge can share common phys_to_dma/
> dma_to_phys function. So we move it form ip27 specific file to
> pci-xtalk-bridge.c

Series applied to mips-next.

> MIPS: PCI: make phys_to_dma/dma_to_phys for pci-xtalk-bridge common
> commit b9e9defb5e60
> https://git.kernel.org/mips/c/b9e9defb5e60
>
> Signed-off-by: Thomas Bogendoerfer <[email protected]>
> Signed-off-by: Paul Burton <[email protected]>
>
> MIPS: add support for SGI Octane (IP30)
> commit 7505576d1c1a
> https://git.kernel.org/mips/c/7505576d1c1a
>
> Signed-off-by: Thomas Bogendoerfer <[email protected]>
> Signed-off-by: Paul Burton <[email protected]>

Thanks,
Paul

[ This message was auto-generated; if you believe anything is incorrect
then please email [email protected] to report it. ]