2019-10-29 01:34:44

by Jitao Shi

Subject: [PATCH v3 0/3] add dsi pwm0 node for mt8183

Changes since v2:
- add calibration property in mipitx and efuse.

Changes since v1:
- remove "mediatek,mt8173-dsi" from dsi node.

This patch is based on v5.4-rc5 and these patches:
https://patchwork.kernel.org/patch/10938825/

Jitao Shi (3):
arm64: dts: mt8183: add dsi node
arm64: dts: mt8183: add pwm0 node
arm64: dts: mt8183: add calibration property in mipitx and efuse

arch/arm64/boot/dts/mediatek/mt8183.dtsi | 40 ++++++++++++++++++++++++
1 file changed, 40 insertions(+)

--
2.21.0

2019-10-29 01:36:05

by Jitao Shi

Subject: [PATCH v3 2/3] arm64: dts: mt8183: add pwm0 node

Add pwm0 node to the mt8183

Signed-off-by: Jitao Shi <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt8183.dtsi | 11 +++++++++++
1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index bb0d53be6a25..2b6e010d6866 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -643,6 +643,17 @@
};
};

+ pwm0: pwm@1100e000 {
+ compatible = "mediatek,mt8183-disp-pwm";
+ reg = <0 0x1100e000 0 0x1000>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_LOW>;
+ power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
+ #pwm-cells = <2>;
+ clocks = <&topckgen CLK_TOP_MUX_DISP_PWM>,
+ <&infracfg CLK_INFRA_DISP_PWM>;
+ clock-names = "main", "mm";
+ };
+
audiosys: syscon@11220000 {
compatible = "mediatek,mt8183-audiosys", "syscon";
reg = <0 0x11220000 0 0x1000>;
--
2.21.0