2019-10-29 20:18:48

by Ondřej Jirman

Subject: [PATCH v3 4/4] arm64: dts: allwinner: orange-pi-3: Enable USB 3.0 host support

Enable Allwinner's USB 3.0 phy and the host controller. Orange Pi 3
board has GL3510 USB 3.0 4-port hub connected to the SoC's USB 3.0
port. All four ports are exposed via USB3-A connectors. VBUS is
always on, since it's powered directly from DCIN (VCC-5V) and
not switchable.

Signed-off-by: Ondrej Jirman <[email protected]>
---
arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 2557cc6c8d50..32800204c22a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -95,6 +95,10 @@
status = "okay";
};

+&dwc3 {
+ status = "okay";
+};
+
&ehci0 {
status = "okay";
};
@@ -304,3 +308,7 @@
usb3_vbus-supply = <&reg_vcc5v>;
status = "okay";
};
+
+&usb3phy {
+ status = "okay";
+};
--
2.23.0