2019-10-30 15:41:31

by Georgi Djakov

Subject: [PATCH v10 0/3] Add MSM8916 interconnect provider driver

Add driver to support scaling of the on-chip interconnects on the
MSM8916-based platforms. Also add the necessary device-tree nodes,
so that the driver for each NoC can probe and register as interconnect
provider.

v10:
- Converted binding to DT schema.
- Use local number space per each NoC in DT.

- Rebased the old patch and resolved conflicts.
- Dropped some unused QoS related code.
- Switched to using the clk_bulk API.
- Improved commit texts.
- Minor changes.

v9:
https://lore.kernel.org/r/[email protected]
https://lore.kernel.org/r/[email protected]

Georgi Djakov (3):
dt-bindings: interconnect: Add Qualcomm MSM8916 DT bindings
interconnect: qcom: Add MSM8916 interconnect provider driver
arm64: dts: msm8916: Add interconnect provider DT nodes

.../bindings/interconnect/qcom,msm8916.yaml | 77 +++
arch/arm64/boot/dts/qcom/msm8916.dtsi | 28 +
drivers/interconnect/qcom/Kconfig | 9 +
drivers/interconnect/qcom/Makefile | 2 +
drivers/interconnect/qcom/msm8916.c | 572 ++++++++++++++++++
.../dt-bindings/interconnect/qcom,msm8916.h | 100 +++
6 files changed, 788 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interconnect/qcom,msm8916.yaml
create mode 100644 drivers/interconnect/qcom/msm8916.c
create mode 100644 include/dt-bindings/interconnect/qcom,msm8916.h

2019-10-30 15:42:23

by Georgi Djakov

Subject: [PATCH v10 3/3] arm64: dts: msm8916: Add interconnect provider DT nodes

Add nodes for the network-on-chip interconnect buses present on
MSM8916-based platforms.

Signed-off-by: Georgi Djakov <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8916.dtsi | 28 +++++++++++++++++++++++++++
1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5ea9fb8f2f87..9c4d89319e7c 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -4,6 +4,7 @@
*/

#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interconnect/qcom,msm8916.h>
#include <dt-bindings/clock/qcom,gcc-msm8916.h>
#include <dt-bindings/reset/qcom,gcc-msm8916.h>
#include <dt-bindings/clock/qcom,rpmcc.h>
@@ -364,11 +365,38 @@
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";

+ bimc: interconnect@400000 {
+ compatible = "qcom,msm8916-bimc";
+ reg = <0x00400000 0x62000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
+ <&rpmcc RPM_SMD_BIMC_A_CLK>;
+ };
+
restart@4ab000 {
compatible = "qcom,pshold";
reg = <0x4ab000 0x4>;
};

+ pcnoc: interconnect@500000 {
+ compatible = "qcom,msm8916-pcnoc";
+ reg = <0x00500000 0x11000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
+ <&rpmcc RPM_SMD_PCNOC_A_CLK>;
+ };
+
+ snoc: interconnect@580000 {
+ compatible = "qcom,msm8916-snoc";
+ reg = <0x00580000 0x14000>;
+ #interconnect-cells = <1>;
+ clock-names = "bus", "bus_a";
+ clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
+ <&rpmcc RPM_SMD_SNOC_A_CLK>;
+ };
+
msmgpio: pinctrl@1000000 {
compatible = "qcom,msm8916-pinctrl";
reg = <0x1000000 0x300000>;