2019-11-06 00:32:00

by Abhishek Pandit-Subedi

Subject: [PATCH 4/4] dt-bindings: net: bluetooth: update broadcom-bluetooth

Add documentation for pcm-parameters.

Signed-off-by: Abhishek Pandit-Subedi <[email protected]>

---

Documentation/devicetree/bindings/net/broadcom-bluetooth.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
index c749dc297624..ae60277b5569 100644
--- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
@@ -29,6 +29,9 @@ Optional properties:
- "lpo": external low power 32.768 kHz clock
- vbat-supply: phandle to regulator supply for VBAT
- vddio-supply: phandle to regulator supply for VDDIO
+ - pcm-parameters: When set, will configure PCM parameters on the device. The
+ contents should be a 10-byte array corresponding to the pcm params (see
+ btbcm.h for more information).


Example:
@@ -40,5 +43,6 @@ Example:
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <921600>;
+ pcm-parameters = [1 2 0 1 1 0 0 0 0 0];
};
};
--
2.24.0.rc1.363.gb1bccd3e3d-goog

2019-11-07 00:47:14

by Rob Herring (Arm)

Subject: Re: [PATCH 4/4] dt-bindings: net: bluetooth: update broadcom-bluetooth

On Tue, Nov 05, 2019 at 04:29:23PM -0800, Abhishek Pandit-Subedi wrote:
> Add documentation for pcm-parameters.
>
> Signed-off-by: Abhishek Pandit-Subedi <[email protected]>
>
> ---
>
> Documentation/devicetree/bindings/net/broadcom-bluetooth.txt | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
> index c749dc297624..ae60277b5569 100644
> --- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
> +++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
> @@ -29,6 +29,9 @@ Optional properties:
> - "lpo": external low power 32.768 kHz clock
> - vbat-supply: phandle to regulator supply for VBAT
> - vddio-supply: phandle to regulator supply for VDDIO
> + - pcm-parameters: When set, will configure PCM parameters on the device. The
> + contents should be a 10-byte array corresponding to the pcm params (see
> + btbcm.h for more information).

Needs a vendor prefix.

>
>
> Example:
> @@ -40,5 +43,6 @@ Example:
> bluetooth {
> compatible = "brcm,bcm43438-bt";
> max-speed = <921600>;
> + pcm-parameters = [1 2 0 1 1 0 0 0 0 0];
> };
> };
> --
> 2.24.0.rc1.363.gb1bccd3e3d-goog
>