Add documentation for pcm parameters.
Signed-off-by: Abhishek Pandit-Subedi <[email protected]>
---
Changes in v3:
- Change disallow baudrate setting to return -EBUSY if called before
ready. bcm_proto is no longer modified and is back to being const.
- Changed btbcm_set_pcm_params to btbcm_set_pcm_int_params
- Changed brcm,sco-routing to brcm,bt-sco-routing
Changes in v2:
- Use match data to disallow baudrate setting
- Parse pcm parameters by name instead of as a byte string
- Fix prefix for dt-bindings commit
.../devicetree/bindings/net/broadcom-bluetooth.txt | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
index c749dc297624..42fb2fa8143d 100644
--- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
@@ -29,6 +29,11 @@ Optional properties:
- "lpo": external low power 32.768 kHz clock
- vbat-supply: phandle to regulator supply for VBAT
- vddio-supply: phandle to regulator supply for VDDIO
+ - brcm,bt-sco-routing: 0-3 (PCM, Transport, Codec, I2S)
+ - brcm,pcm-interface-rate: 0-4 (128KBps, 256KBps, 512KBps, 1024KBps, 2048KBps)
+ - brcm,pcm-frame-type: 0-1 (short, long)
+ - brcm,pcm-sync-mode: 0-1 (slave, master)
+ - brcm,pcm-clock-mode: 0-1 (slave, master)
Example:
@@ -40,5 +45,11 @@ Example:
bluetooth {
compatible = "brcm,bcm43438-bt";
max-speed = <921600>;
+
+ brcm,bt-sco-routing = [01];
+ brcm,pcm-interface-rate = [02];
+ brcm,pcm-frame-type = [00];
+ brcm,pcm-sync-mode = [01];
+ brcm,pcm-clock-mode = [01];
};
};
--
2.24.0.rc1.363.gb1bccd3e3d-goog